|
|
|
#include <Measurement.h>
Definition at line 27 of file Measurement.h.
Definition at line 44 of file Measurement.cc.
References theDim, theSigma, theValue, theValueIsSimulated, theValueSimulated, theValueSimulated_orig, and theValueType.
: theDim(measdim), theType(type), theName( name ) { // _OptOnames = new ALIstring[theDim]; theValue = new ALIdouble[theDim]; theSigma = new ALIdouble[theDim]; theValueType = new ALIstring[theDim]; theValueSimulated = new ALIdouble[theDim]; theValueSimulated_orig = new ALIdouble[theDim]; theValueIsSimulated = new ALIbool[theDim]; }
| Measurement::Measurement | ( | ) | [inline] |
Definition at line 32 of file Measurement.h.
{ };
| Measurement::~Measurement | ( | ) | [virtual] |
| void Measurement::addAffectingEntriesFromOptO | ( | const OpticalObject * | optoP | ) |
Definition at line 389 of file Measurement.cc.
References OpticalObject::CoordinateEntryList(), gather_cfg::cout, ALIUtils::debug, OpticalObject::ExtraEntryList(), spr::find(), OpticalObject::name(), OpticalObject::parent(), and theAffectingEntryList.
Referenced by buildAffectingEntryList().
{
if(ALIUtils::debug >= 3) std::cout << "Measurement::addAffectingEntriesFromOptO: OptO taking part in Measurement: " << optoP->name() << std::endl;
//---------- Loop entries in this OptO
std::vector< Entry* >::const_iterator vecite;
std::vector< Entry* >::const_iterator fvecite;
for (vecite = optoP->CoordinateEntryList().begin();
vecite != optoP->CoordinateEntryList().end(); vecite++) {
//T if( find( theAffectingEntryList.begin(), theAffectingEntryList.end(), (*vecite) ) == theAffectingEntryList.end() ){
//t theAffectingEntryList.push_back(*vecite);
//T }
fvecite = find( theAffectingEntryList.begin(), theAffectingEntryList.end(), (*vecite) );
if (fvecite == theAffectingEntryList.end() ){
theAffectingEntryList.push_back(*vecite);
if(ALIUtils::debug >= 4) std::cout << "Entry that may affect Measurement: " << (*vecite)->name() << std::endl;
}
}
for (vecite = optoP->ExtraEntryList().begin();
vecite != optoP->ExtraEntryList().end(); vecite++) {
fvecite = find( theAffectingEntryList.begin(), theAffectingEntryList.end(), (*vecite) );
if (fvecite == theAffectingEntryList.end() ){
theAffectingEntryList.push_back(*vecite);
if(ALIUtils::debug >= 4) std::cout << "Entry that may affect Measurement: " << (*vecite)->name() << std::endl;
}
}
if(optoP->parent() != 0) {
addAffectingEntriesFromOptO( optoP->parent() );
}
}
| void Measurement::AddOptOListItem | ( | OpticalObject * | opto | ) | [inline] |
Definition at line 188 of file Measurement.h.
References _OptOList.
{
_OptOList.push_back( opto );
}
| void Measurement::AddOptONameListItem | ( | ALIstring | optos | ) | [inline] |
Definition at line 184 of file Measurement.h.
References _OptONameList.
Referenced by MeasurementDiffEntry::buildOptONamesList().
{
_OptONameList.push_back( optos );
}
| const std::vector<Entry*>& Measurement::affectingEntryList | ( | ) | const [inline] |
Definition at line 113 of file Measurement.h.
References theAffectingEntryList.
{
return theAffectingEntryList;
}
| void Measurement::buildAffectingEntryList | ( | ) |
Definition at line 374 of file Measurement.cc.
References _OptOList, and addAffectingEntriesFromOptO().
Referenced by postConstruct().
{
//---------- Loop OptO MeasuredList
std::vector< OpticalObject* >::const_iterator vocite;
for (vocite = _OptOList.begin();
vocite != _OptOList.end(); vocite++) {
addAffectingEntriesFromOptO( *vocite );
}
}
| void Measurement::buildOptOList | ( | ) |
Definition at line 316 of file Measurement.cc.
References _OptOList, _OptONameList, dtNoiseDBValidation_cfg::cerr, gather_cfg::cout, ALIUtils::debug, cmsRelvalreport::exit, Model::getOptOByName(), OpticalObject::name(), and Substitute2p().
Referenced by postConstruct().
{
//- if ( ALIUtils::debug >= 3 ) std::cout << std::endl << " MEASUREMENT: " << " " << this->name() << std::endl;
ALIstring twopoints(".."); // .. goes one level up in the tree fo OptOs
//---------------------------------------- Loop OptONameList
std::vector<ALIstring>::iterator vsite;
for (vsite = _OptONameList.begin();
vsite != _OptONameList.end(); vsite++) {
//----------------------------------- Count how many '..' there are in the name
ALIuint ii = 0;
// ALIuint slen = (*vsite).length();
ALIuint Ntwopoints = 0; //---- No '..' in ALIstring
for(;;) {
int i2p = (*vsite).find_first_of( twopoints, 3*ii ); // if it is ., it also finds it!!!
if ( i2p < 0 ) break;
if ( i2p != ALIint(3*ii)) {
std::cerr << i2p << "!!! Bad position of '..' in reference ALIstring: "
<< (*vsite).c_str() << std::endl;
exit(2);
} else {
Ntwopoints++;
if ( ALIUtils::debug >=9 ) std::cout << "N2p" << Ntwopoints;
}
ii++;
}
//------ Substitute '..' by reference (the last OptO in list)
if (Ntwopoints != 0) {
Substitute2p( (*vsite), *(_OptONameList.end()-1), Ntwopoints);
}
//----- Get OpticalObject* that correspond to ALIstring and fill list
ALIstring referenceOptO = (*vsite);
//--- a ':' is used in OptOs that have several possible behavious
ALIint colon = referenceOptO.find(':');
if ( colon != -1 ) {
if (ALIUtils::debug >=99) {
std::cout << "colon in reference OptO name " << colon <<
referenceOptO.c_str() << std::endl;
}
referenceOptO = referenceOptO.substr( 0, colon );
}
OpticalObject* OptOitem = Model::getOptOByName( referenceOptO );
if ( ALIUtils::debug >= 3 ) std::cout << "Measurement::buildOptOList: OptO in Measurement: " << OptOitem->name() << std::endl;
if ( OptOitem != (OpticalObject*)0 ) {
_OptOList.push_back( OptOitem);
} else {
std::cerr << "!!! Error in Measurement: can't find Optical Object " <<
(*vsite).c_str() << std::endl;
exit(2);
}
}
}
| void Measurement::buildOptONamesList | ( | const std::vector< ALIstring > & | wl | ) | [virtual] |
Reimplemented in MeasurementDiffEntry.
Definition at line 177 of file Measurement.cc.
References _OptONameList, dtNoiseDBValidation_cfg::cerr, and cmsRelvalreport::exit.
Referenced by construct(), constructFromOA(), and copyMeas().
{
int NPairs = (wl.size()+1)/2; // Number of OptO names ( pair of name and '&' )
//--------- Fill list with names
for ( int ii=0; ii<NPairs; ii++ ) {
_OptONameList.push_back( wl[ii*2] );
// Check for separating '&'
if (ii != NPairs-1 && wl[2*ii+1] != ALIstring("&") ) {
// ALIFileIn::getInstance( Model::SDFName() ).ErrorInLine();
std::cerr << "!!! Measured Optical Objects should be separated by '&', not by"
<< wl[2*ii+1] << std::endl;
exit(2);
}
}
}
| void Measurement::calculateOriginalSimulatedValue | ( | ) |
Definition at line 452 of file Measurement.cc.
References calculateSimulatedValue(), gather_cfg::cout, ALIUtils::debug, dim(), ALIUtils::getFirstTime(), GlobalOptionMgr::getInstance(), GlobalOptionMgr::GlobalOptions(), setValue(), setValueSimulated_orig(), valueIsSimulated(), and valueSimulated().
{
//---------- Calculate the simulated value of the Measurement
calculateSimulatedValue( 1 );
#ifdef COCOA_VIS
if( ALIUtils::getFirstTime() ) {
GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
if(gomgr->GlobalOptions()["VisWriteVRML"] > 1) {
ALIVRMLMgr::getInstance().newLightRay();
}
/*- if(Model::GlobalOptions()["VisWriteIguana"] > 1) {
IgCocoaFileMgr::getInstance().newLightPath( theName );
} */
}
#endif
//---------- Set original simulated values to it
//- if(ALIUtils::debug >= 5) std::cout << "MEAS DIMENSION" << dim() << std::endl;
for ( ALIuint ii = 0; ii < dim(); ii++) {
setValueSimulated_orig( ii, valueSimulated(ii) );
if ( ALIUtils::debug >= 4 ) std::cout << "SETsimuvalOriginal" << valueSimulated(ii) << std::endl;
//----- If Measurement has as value 'simulated_value', set the value to the simulated one
if( valueIsSimulated(ii) == 1 ){
setValue( ii, valueSimulated(ii) );
//- std::cout << ii << " setting value as simulated " << valueSimulated(ii) << " " << value(ii) << this << std::endl;
}
}
}
| virtual void Measurement::calculateSimulatedValue | ( | ALIbool | firstTime | ) | [inline, virtual] |
Reimplemented in MeasurementCOPS, MeasurementDiffEntry, MeasurementDistancemeter, MeasurementDistancemeter3dim, MeasurementSensor2D, and MeasurementTiltmeter.
Definition at line 51 of file Measurement.h.
Referenced by calculateOriginalSimulatedValue(), and DerivativeRespectEntry().
{};
| void Measurement::construct | ( | ) |
Definition at line 62 of file Measurement.cc.
References buildOptONamesList(), filterCSVwithJSON::copy, correctValueAndSigma(), gather_cfg::cout, ALIUtils::debug, dim(), fillData(), ALIFileIn::getInstance(), ALIFileIn::getWordsInLine(), name(), postConstruct(), Model::SDFName(), type(), and valueIsSimulated().
Referenced by Model::readSystemDescription().
{
ALIFileIn& filein = ALIFileIn::getInstance( Model::SDFName() );
//---------- Read OptOs that take part in this Measurement
std::vector<ALIstring> wordlist;
filein.getWordsInLine( wordlist );
//--------- Fill the list of names of OptOs that take part in this measurement ( names only )
buildOptONamesList( wordlist );
if(ALIUtils::debug >= 3) {
std::cout << "@@@@ Reading Measurement " << name() << " TYPE= " << type() << std::endl
<< " MEASURED OPTO NAMES: ";
std::ostream_iterator<ALIstring> outs(std::cout," ");
copy(wordlist.begin(), wordlist.end(), outs);
std::cout << std::endl;
}
//---------- Read the data
for ( unsigned int ii=0; ii<dim(); ii++){
filein.getWordsInLine( wordlist );
fillData( ii, wordlist );
}
if( !valueIsSimulated(0) ) correctValueAndSigma();
postConstruct();
}
| void Measurement::constructFromOA | ( | OpticalAlignMeasurementInfo & | measInfo | ) |
Definition at line 95 of file Measurement.cc.
References _OptONameList, buildOptONamesList(), gather_cfg::cout, ALIUtils::debug, dim(), ALIUtils::dumpVS(), fillData(), OpticalAlignMeasurementInfo::isSimulatedValue_, OpticalAlignMeasurementInfo::measObjectNames_, name(), postConstruct(), sigmaDimensionFactor(), type(), valueDimensionFactor(), and OpticalAlignMeasurementInfo::values_.
Referenced by Model::BuildMeasurementsFromOA().
{
//---- Build wordlist to build object name list
std::vector<std::string> objNames = measInfo.measObjectNames_;
std::vector<std::string>::const_iterator site;
std::vector<ALIstring> wordlist;
//--- Fill the list of names of OptOs that take part in this measurement ( names only )
for( site = objNames.begin(); site != objNames.end(); site++) {
if( site != objNames.begin() ) wordlist.push_back("&");
wordlist.push_back(*site);
}
buildOptONamesList( wordlist );
if(ALIUtils::debug >= 3) {
std::cout << "@@@@ Reading Measurement " << name() << " TYPE= " << type() << " " << measInfo << std::endl
<< " MEASURED OPTO NAMES: ";
for( size_t ii = 0; ii < _OptONameList.size(); ii++ ){
std::cout << _OptONameList[ii] << " ";
}
std::cout << std::endl;
}
//---------- No data, set to simulated_value
for ( unsigned int ii=0; ii<dim(); ii++){
wordlist.clear();
wordlist.push_back( (measInfo.values_)[ii].name_ );
char ctmp[20];
if( measInfo.isSimulatedValue_[ii] ){
if ( ALIUtils::debug >= 5 ) {
std::cout << "Measurement::constructFromOA: meas value " << ii << " " << dim() << " = simulated_value" << std::endl;
}
wordlist.push_back("simulated_value");
} else {
if ( ALIUtils::debug >= 5 ) {
std::cout << "Measurement::constructFromOA: meas value " << ii << " " << dim() << " = " << measInfo.values_.size() << std::endl;
}
ALIdouble val = (measInfo.values_)[ii].value_ / valueDimensionFactor(); //in XML values are without dimensions, so neutralize multiplying by valueDimensionFactor() in fillData
gcvt( val, 10, ctmp );
wordlist.push_back( ctmp );
}
ALIdouble err = (measInfo.values_)[ii].error_ / sigmaDimensionFactor(); //in XML values are without dimensions, so neutralize multiplying by valueDimensionFactor() in fillData
gcvt( err, 10, ctmp );
wordlist.push_back( ctmp );
std::cout << " sigma " << err << " = " << ctmp << " " << (measInfo.values_)[ii].error_ << std::endl;
//- wordlist.push_back( "simulated_value" );
//- wordlist.push_back( "1." );
if ( ALIUtils::debug >= 5 ) ALIUtils::dumpVS(wordlist, " Measurement: calling fillData ");
//- std::cout << " MEAS INFO " << measInfo << std::endl;
//- std::cout << ii << " MEAS INFO PARAM " << (measInfo.values_)[ii] << std::endl;
//- std::cout << ii << " MEAS INFO PARAM VALUE " << (measInfo.values_)[ii].value_ << std::endl;
fillData( ii, wordlist );
}
postConstruct();
}
| void Measurement::copyMeas | ( | Measurement * | meas, |
| const std::string & | subsstr1, | ||
| const std::string & | subsstr2 | ||
| ) |
Definition at line 649 of file Measurement.cc.
References buildOptONamesList(), ALIUtils::changeName(), filterCSVwithJSON::copy, gather_cfg::cout, ALIUtils::debug, dim(), name(), OptOList(), postConstruct(), sigma(), theDim, theName, theSigma, theType, theValue, theValueIsSimulated, theValueSimulated, theValueSimulated_orig, type(), value(), valueIsSimulated(), valueSimulated(), and valueSimulated_orig().
Referenced by Model::copyMeasurements().
{
theDim = meas->dim();
theType = meas->type();
theName = ALIUtils::changeName( meas->name(), subsstr1, subsstr2);
// _OptOnames = new ALIstring[theDim];
theValueSimulated = new ALIdouble[theDim];
theValueSimulated_orig = new ALIdouble[theDim];
theValueIsSimulated = new ALIbool[theDim];
theValue = const_cast<ALIdouble*>(meas->value());
theSigma = const_cast<ALIdouble*>(meas->sigma());
unsigned int ii;
for(ii = 0; ii < theDim; ii++) {
theValueSimulated[ii] = meas->valueSimulated( ii );
theValueSimulated_orig[ii] = meas->valueSimulated_orig( ii );
theValueIsSimulated[ii] = meas->valueIsSimulated( ii );
}
//--------- Fill the list of names of OptOs that take part in this measurement ( names only )
std::vector<std::string> wordlist;
auto &optolist = meas->OptOList();
ALIuint nOptos = optolist.size();
for ( ALIuint ii = 0; ii < nOptos; ii++ ) {
wordlist.push_back( ALIUtils::changeName( optolist[ii]->longName(), subsstr1, subsstr2) );
std::cout << " copymeas " << ALIUtils::changeName( optolist[ii]->longName(), subsstr1, subsstr2) << std::endl;
if( ii != nOptos -1 ) wordlist.push_back("&");
}
buildOptONamesList( wordlist );
if(ALIUtils::debug >= 3) {
std::cout << "@@@@ Reading Measurement " << name() << " TYPE= " << type() << std::endl
<< " MEASURED OPTO NAMES: ";
std::ostream_iterator<ALIstring> outs(std::cout," ");
copy(wordlist.begin(), wordlist.end(), outs);
std::cout << std::endl;
}
postConstruct();
}
| virtual void Measurement::correctValueAndSigma | ( | ) | [inline, virtual] |
Reimplemented in MeasurementCOPS, MeasurementDistancemeter, MeasurementDistancemeter3dim, MeasurementSensor2D, and MeasurementTiltmeter.
Definition at line 67 of file Measurement.h.
Referenced by construct(), Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().
{};
Definition at line 511 of file Measurement.cc.
References calculateSimulatedValue(), dtNoiseDBValidation_cfg::cerr, gather_cfg::cout, ALIUtils::debug, Entry::displace(), cmsRelvalreport::exit, ALIUtils::getMaximumDeviationDerivative(), OpticalObject::name(), Entry::name(), name(), Entry::OptOCurrent(), OpticalObject::resetGlobalCoordinates(), Entry::startingDisplacement(), theDim, theValueSimulated, and theValueSimulated_orig.
{
//---------- std::vector of derivatives to return
std::vector<ALIdouble> deriv;
ALIdouble sumderiv;
//---------- displacement to start with
ALIdouble displacement = entry->startingDisplacement();
//----- all angles are in radians, so, if displace is not, rescale it before making the displacement
//- displacement *= entry->SigmaDimensionFactor();
if( ALIUtils::debug >= 3) std::cout << std::endl << "%%% Derivative w.r.t. entry " << entry->name() << ": displacement = " << displacement << std::endl;
ALIint count_itera = 0;
//---------- Loop decreasing the displacement a factor 2, until the precision set is reached
do {
count_itera++;
entry->displace( displacement );
if ( ALIUtils::debug >= 5) std::cout << "Get simulated value for displacement " << displacement << std::endl;
calculateSimulatedValue( 0 );
//---------- Get sum of derivatives
sumderiv = 0;
for ( ALIuint ii = 0; ii < theDim; ii++) {
sumderiv += fabs( theValueSimulated[ii] - theValueSimulated_orig[ii] );
if( ALIUtils::debug >= 4 ) {
std::cout << "iteration " << count_itera << " COOR " << ii
<< " difference =" << ( theValueSimulated[ii] - theValueSimulated_orig[ii] )
//- << " " << theValueSimulated[ii] << " " << theValueSimulated_orig[ii]
<< " derivative = " << (theValueSimulated[ii] - theValueSimulated_orig[ii]) /displacement << " disp " << displacement
<< " sum derivatives = " << sumderiv << std::endl;
}
if( ALIUtils::debug >= 5 ) {
std::cout << " new simu value= " << theValueSimulated[ii] << " orig simu value " << theValueSimulated_orig[ii] << std::endl;
}
}
if (count_itera >= 100) {
std::cerr << "EXITING: too many iterations in derivative, displacement is " <<
displacement << " sum of derivatives is " << sumderiv << std::endl;
exit(3);
}
displacement /= 2.;
//- std::cout << "sumderiv " << sumderiv << " maximu " << Fit::maximum_deviation_derivative << std::endl;
}while( sumderiv > ALIUtils::getMaximumDeviationDerivative() );
displacement *= 2;
//---------- Enough precision reached: pass result
for ( ALIuint ii = 0; ii < theDim; ii++) {
deriv.push_back( ( theValueSimulated[ii] - theValueSimulated_orig[ii] ) / displacement );
//----- change it to entry sigma dimensions
// deriv[ii] /= entry->SigmaDimensionFactor();
if( ALIUtils::debug >= 1) std::cout << name() << ": " << entry->OptOCurrent()->name() << " " << entry->name() << " " << ii << "### DERIVATIVE: " << deriv[ii] << std::endl;
}
//- if(ALIUtils::debug >= 5) std::cout << "END derivative: " << deriv << "disp" << displacement << std::endl;
//--------------------- Reset _centreGlob and _rmGlob of OptO entry belongs to (and component OptOs)
entry->OptOCurrent()->resetGlobalCoordinates();
return deriv;
}
| const ALIuint Measurement::dim | ( | ) | const [inline] |
Definition at line 82 of file Measurement.h.
References theDim.
Referenced by calculateOriginalSimulatedValue(), construct(), constructFromOA(), copyMeas(), MeasurementCOPS::correctValueAndSigma(), CocoaToDDLMgr::measurementsAsSpecPars(), Model::readMeasurementsFromFile(), CocoaDaqReaderText::ReadNextEvent(), MeasurementCOPS::setConversionFactor(), and SetDimension().
{
return theDim;
}
| void Measurement::DumpBadOrderOptOs | ( | ) |
Definition at line 487 of file Measurement.cc.
References begin, dtNoiseDBValidation_cfg::cerr, ALIUtils::debug, cmsRelvalreport::exit, and OptONameList().
Referenced by MeasurementSensor2D::calculateSimulatedValue(), MeasurementTiltmeter::calculateSimulatedValue(), MeasurementCOPS::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), MeasurementDistancemeter::calculateSimulatedValue(), and MeasurementDiffEntry::calculateSimulatedValue().
{
std::cerr << " Detector can not make measurement with these optical objects " << std::endl;
if (ALIUtils::debug >= 1) {
// std::vector<OpticalObject*>::iterator voite;
// for ( voite = _OptOList.begin();
// voite != _OptOList.end(); voite++) {
// std::cout << (*voite)->type() << " : " << (*voite)->name() << std::endl;
// }
std::vector<ALIstring>::const_iterator vsite;
for ( vsite = OptONameList().begin();
vsite != OptONameList().end(); vsite++) {
std::cerr << (*vsite) << " : " ;
}
std::cerr << std::endl;
}
exit(2);
}
Definition at line 200 of file Measurement.cc.
References dtNoiseDBValidation_cfg::cerr, filterCSVwithJSON::copy, gather_cfg::cout, ALIUtils::debug, cmsRelvalreport::exit, ParameterMgr::getInstance(), ParameterMgr::getParameterValue(), ALIUtils::IsNumber(), sigmaDimensionFactor(), theDim, theSigma, theValue, theValueIsSimulated, theValueType, and valueDimensionFactor().
Referenced by construct(), constructFromOA(), Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().
{
if ( ALIUtils::debug >= 3 ) {
std::cout << "@@ Filling coordinate " << coor << std::endl ;
//- ostream_iterator<ALIstring> outs(std::cout," ");
//- copy(wordlist.begin(), wordlist.end(), outs);
}
ParameterMgr* parmgr = ParameterMgr::getInstance();
//---------- Check that there are 3 attributes: name, value, error
if( wordlist.size() != 3 ) {
// ALIFileIn::getInstance( Model::SDFName() ).ErrorInLine();
std::cerr << " Incorrect format for Measurement value:" << std::endl;
std::ostream_iterator<ALIstring> outs(std::cout," ");
copy(wordlist.begin(), wordlist.end(), outs);
std::cout << std::endl << "There should be three words: name value sigma " << std::endl;
exit(2);
}
//---------- check coor value
if (coor >= theDim ) {
// ALIFileIn::getInstance( Model::SDFName() ).ErrorInLine();
std::cerr << "Trying to fill Measurement coordinate No "
<< coor << " but the dimension is " << theDim << std::endl;
exit(2);
}
//---------- set data members
//----- Set valueType
theValueType[coor] = wordlist[0];
//----- Set value (translate it if a PARAMETER is used)
ALIdouble val = 0.;
theValueIsSimulated[coor] = 0;
if( !ALIUtils::IsNumber(wordlist[1]) ) {
if ( parmgr->getParameterValue( wordlist[1], val ) == 0 ) {
if( wordlist[1] == ALIstring("simulated_value") ) {
theValueIsSimulated[coor] = 1;
} else {
// ALIFileIn::getInstance( Model::SDFName() ).ErrorInLine();
std::cerr << "!!! parameter for value not found: " << wordlist[1].c_str() << std::endl;
exit(2);
}
}
//d val *= valueDimensionFactor();
} else {
//d val = DimensionMgr()::getInstance()->extractValue( wordlist[1], ValueDimensionFactor() );
val = atof( wordlist[1].c_str() );
}
val *= valueDimensionFactor();
if( ALIUtils::debug >= 3 ) std::cout << "Meas VALUE= " << val << " (ValueDimensionFactor= " << valueDimensionFactor() <<std::endl;
//----- Set sigma (translate it if a PARAMETER is used)
ALIdouble sig = 0.;
if( !ALIUtils::IsNumber(wordlist[2]) ) {
if ( parmgr->getParameterValue( wordlist[2], sig ) == 0 ) {
// ALIFileIn::getInstance( Model::SDFName() ).ErrorInLine();
std::cerr << "!!! parameter for sigma not found: " << wordlist[2].c_str() << std::endl;
exit(2);
}
//d sig *= sigmaDimensionFactor();
} else {
// sig = DimensionMgr()::getInstance()->extractValue( wordlist[2], ValueDimensionFactor() );
sig = atof( wordlist[2].c_str() );
}
sig *= sigmaDimensionFactor();
if( ALIUtils::debug >= 3) std::cout << "SIGMA= " << sig << " (SigmaDimensionFactor= " << sigmaDimensionFactor() <<std::endl;
//----- set theValue & theSigma
theValue[coor] = val;
theSigma[coor] = sig;
}
| void Measurement::fillData | ( | ALIuint | coor, |
| OpticalAlignParam * | oaParam | ||
| ) |
Definition at line 277 of file Measurement.cc.
References dtNoiseDBValidation_cfg::cerr, gather_cfg::cout, ALIUtils::debug, cmsRelvalreport::exit, GlobalOptionMgr::getInstance(), GlobalOptionMgr::GlobalOptions(), OpticalAlignParam::sigma(), sigmaDimensionFactor(), theDim, theSigma, theValue, theValueIsSimulated, OpticalAlignParam::value(), and valueDimensionFactor().
{
if ( ALIUtils::debug >= 3 ) {
std::cout << "@@ Filling coordinate " << coor << std::endl ;
}
// ParameterMgr* parmgr = ParameterMgr::getInstance();
//---------- check coor value
if (coor >= theDim ) {
std::cerr << "Trying to fill Measurement coordinate No "
<< coor << " but the dimension is " << theDim << std::endl;
exit(2);
}
//---------- set data members
//----- Set value (translate it if a PARAMETER is used)
ALIdouble val = 0.;
theValueIsSimulated[coor] = 0;
val = oaParam->value();
val *= valueDimensionFactor();
theValue[coor] = val;
if( ALIUtils::debug >= 3 ) std::cout << "Meas VALUE= " << val << " (ValueDimensionFactor= " << valueDimensionFactor() <<std::endl;
ALIbool sigmaFF = GlobalOptionMgr::getInstance()->GlobalOptions()["measurementErrorFromFile"];
if( sigmaFF ) {
//----- Set sigma (translate it if a PARAMETER is used)
ALIdouble sig = 0.;
sig = oaParam->sigma(); // it is in mm always
sig *= sigmaDimensionFactor();
theSigma[coor] = sig;
if( ALIUtils::debug >= 3) std::cout << "SIGMA= " << sig << " (SigmaDimensionFactor= " << sigmaDimensionFactor() <<std::endl;
}
}
| static ALIstring Measurement::getCurrentDate | ( | ) | [inline, static] |
Definition at line 152 of file Measurement.h.
References theCurrentDate.
Referenced by FittedEntriesSet::FittedEntriesSet().
{
return theCurrentDate;
}
| static ALIstring Measurement::getCurrentTime | ( | ) | [inline, static] |
| const CLHEP::Hep3Vector& Measurement::getLightRayDirection | ( | ) | const [inline] |
Definition at line 162 of file Measurement.h.
References theLightRayDirection.
{
return theLightRayDirection;
}
| const CLHEP::Hep3Vector& Measurement::getLightRayPosition | ( | ) | const [inline] |
Definition at line 159 of file Measurement.h.
References theLightRayPosition.
{
return theLightRayPosition;
}
| ALIstring Measurement::getMeasuringBehaviour | ( | const std::vector< OpticalObject * >::const_iterator | vocite | ) |
Definition at line 591 of file Measurement.cc.
References _OptOList, and _OptONameList.
Referenced by MeasurementSensor2D::calculateSimulatedValue(), MeasurementTiltmeter::calculateSimulatedValue(), MeasurementCOPS::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), and MeasurementDistancemeter::calculateSimulatedValue().
{
std::vector<ALIstring>::const_iterator vscite = _OptONameList.begin() +
( vocite - _OptOList.begin() ); // point to corresponding name of this OptO
ALIint colon = (*vscite).find(':');
ALIstring behav;
if(colon != -1 ) {
behav = (*vscite).substr(colon+1,(*vscite).size());
} else {
behav = " ";
}
return behav;
}
| const OpticalObject * Measurement::getPreviousOptO | ( | const OpticalObject * | Popto | ) | const |
Definition at line 608 of file Measurement.cc.
References _OptOList, dtNoiseDBValidation_cfg::cerr, cmsRelvalreport::exit, OpticalObject::name(), and name().
Referenced by OptODistancemeter::makeMeasurement(), and OptODistancemeter3dim::makeMeasurement().
{
//--------- Loop OptOs that take part in this measurement
std::vector<OpticalObject*>::const_iterator vocite;
for( vocite = _OptOList.begin(); vocite != _OptOList.end(); vocite++ ){
if( *vocite == Popto ) {
if( vocite == _OptOList.begin() ) {
std::cerr << " ERROR in getPreviousOptO of measurement " << name() << std::endl;
std::cerr << " OptO " << Popto->name() << " is the first one " << std::endl;
exit(1);
} else {
return *(vocite-1);
}
}
}
std::cerr << " ERROR in getPreviousOptO of measurement " << name() << std::endl;
std::cerr << " OptO " << Popto->name() << " not found " << std::endl;
exit(1);
}
| static ALIstring& Measurement::measurementsFileName | ( | ) | [inline, static] |
Definition at line 213 of file Measurement.h.
References theMeasurementsFileName.
Referenced by Model::readMeasurementsFromFile().
{
return theMeasurementsFileName;
}
| const ALIstring& Measurement::name | ( | ) | const [inline] |
Definition at line 90 of file Measurement.h.
References theName.
Referenced by MeasurementSensor2D::calculateSimulatedValue(), MeasurementTiltmeter::calculateSimulatedValue(), MeasurementCOPS::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), MeasurementDistancemeter::calculateSimulatedValue(), MeasurementDiffEntry::calculateSimulatedValue(), construct(), constructFromOA(), copyMeas(), Model::copyMeasurements(), DerivativeRespectEntry(), getPreviousOptO(), CocoaToDDLMgr::measurementsAsSpecPars(), printStartCalculateSimulatedValue(), and OptOUserDefined::userDefinedBehaviour().
{
return theName;
}
| const std::vector<OpticalObject*>& Measurement::OptOList | ( | ) | const [inline] |
Definition at line 109 of file Measurement.h.
References _OptOList.
Referenced by MeasurementSensor2D::calculateSimulatedValue(), MeasurementTiltmeter::calculateSimulatedValue(), MeasurementCOPS::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), MeasurementDistancemeter::calculateSimulatedValue(), MeasurementDiffEntry::calculateSimulatedValue(), copyMeas(), and OptOCOPS::makeMeasurement().
{
return _OptOList;
}
| const std::vector<ALIstring>& Measurement::OptONameList | ( | ) | const [inline] |
Definition at line 105 of file Measurement.h.
References _OptONameList.
Referenced by DumpBadOrderOptOs(), and CocoaToDDLMgr::measurementsAsSpecPars().
{
return _OptONameList;
}
| void Measurement::postConstruct | ( | ) |
Definition at line 154 of file Measurement.cc.
References Model::addMeasurementToList(), buildAffectingEntryList(), buildOptOList(), gather_cfg::cout, ALIUtils::debug, Model::MeasurementList(), and setName().
Referenced by construct(), constructFromOA(), and copyMeas().
{
//---------- Set name as name of last OptO
setName();
//---------- Transform for each Measurement the Measured OptO names to Measured OptO pointers
buildOptOList();
//---------- Build list of Entries that affect a Measurement
buildAffectingEntryList();
//---------- add this measurement to the global list of measurements
Model::addMeasurementToList( this );
if ( ALIUtils::debug >= 10 ) {
std::cout << Model::MeasurementList().size() << std::endl;
}
}
| void Measurement::printStartCalculateSimulatedValue | ( | const Measurement * | meas | ) | [protected] |
Definition at line 444 of file Measurement.cc.
References gather_cfg::cout, name(), and type().
Referenced by MeasurementSensor2D::calculateSimulatedValue(), MeasurementTiltmeter::calculateSimulatedValue(), MeasurementCOPS::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), MeasurementDistancemeter::calculateSimulatedValue(), and MeasurementDiffEntry::calculateSimulatedValue().
| const ALIstring& Measurement::sensorName | ( | ) | [inline] |
| virtual void Measurement::setConversionFactor | ( | const std::vector< ALIstring > & | wordlist | ) | [inline, virtual] |
Reimplemented in MeasurementCOPS, MeasurementDistancemeter, MeasurementDistancemeter3dim, MeasurementSensor2D, and MeasurementTiltmeter.
Definition at line 70 of file Measurement.h.
References dtNoiseDBValidation_cfg::cerr, and cmsRelvalreport::exit.
Referenced by Model::readSystemDescription().
| void Measurement::setCurrentDate | ( | const std::vector< ALIstring > & | wl | ) | [static] |
set the date of the current measurement
Definition at line 631 of file Measurement.cc.
References dtNoiseDBValidation_cfg::cerr, ALIUtils::dumpVS(), cmsRelvalreport::exit, theCurrentDate, and theCurrentTime.
Referenced by Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().
{
if( wl.size() != 3 ){
std::cerr << "!!!EXITING: reading DATE of measurements set: it must have three words, it is though " << std::endl;
ALIUtils::dumpVS(wl, " ");
exit(1);
} else if(wl[0] != "DATE:" ){
std::cerr << "!!!EXITING: reading DATE of measurements set: first word must be 'DATE:', it is though " << std::endl;
ALIUtils::dumpVS( wl, " ");
exit(1);
} else {
theCurrentDate = wl[1];
theCurrentTime = wl[2];
}
}
| void Measurement::SetDimension | ( | ALIuint | dim | ) | [inline] |
| void Measurement::setLightRayDirection | ( | const CLHEP::Hep3Vector & | lightRayDirection | ) | [inline] |
Definition at line 224 of file Measurement.h.
References theLightRayDirection.
Referenced by OptOSensor2D::makeMeasurement().
{ theLightRayDirection = lightRayDirection; }
| void Measurement::setLightRayPosition | ( | const CLHEP::Hep3Vector & | lightRayPosition | ) | [inline] |
Definition at line 222 of file Measurement.h.
References theLightRayPosition.
Referenced by OptOSensor2D::makeMeasurement().
{ theLightRayPosition = lightRayPosition; }
| static void Measurement::setMeasurementsFileName | ( | const ALIstring & | filename | ) | [inline, static] |
Definition at line 216 of file Measurement.h.
References lut2db_cfg::filename, and theMeasurementsFileName.
{
//- std::cout << " setting file name " << filename << std::endl;
theMeasurementsFileName = filename;
//- std::cout << " dsetting file name " << filename << std::endl;
}
| void Measurement::setName | ( | ) |
Definition at line 697 of file Measurement.cc.
References _OptONameList, dtNoiseDBValidation_cfg::cerr, cmsRelvalreport::exit, theName, and type().
Referenced by postConstruct().
{
// name already set by passing one argument with sensor type
if( theName != "" ) return;
if( _OptONameList.size() == 0) {
std::cerr << " !!! Error in your code, you cannot ask for the name of the Measurement before the OptONameList is build " << std::endl;
exit(9);
}
std::vector<ALIstring>::iterator vsite = (_OptONameList.end()-1);
theName = type() + ":" + (*vsite);
}
Definition at line 171 of file Measurement.h.
References theSigma.
Referenced by MeasurementDistancemeter::correctValueAndSigma(), MeasurementDistancemeter3dim::correctValueAndSigma(), MeasurementTiltmeter::correctValueAndSigma(), Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().
{
theSigma[coor] = val;
//- std::cout << coor << " setting sigma " << theSigma[coor] << std::endl;
}
| void Measurement::setType | ( | ALIstring | type | ) | [inline] |
Definition at line 167 of file Measurement.h.
References theValue.
Referenced by calculateOriginalSimulatedValue(), MeasurementCOPS::correctValueAndSigma(), MeasurementDistancemeter::correctValueAndSigma(), MeasurementDistancemeter3dim::correctValueAndSigma(), MeasurementSensor2D::correctValueAndSigma(), and MeasurementTiltmeter::correctValueAndSigma().
{
theValue[coor] = val;
}
Definition at line 196 of file Measurement.h.
References theValueSimulated, and value().
Referenced by MeasurementDiffEntry::calculateSimulatedValue(), OptODistancemeter::makeMeasurement(), OptODistancemeter3dim::makeMeasurement(), OptOTiltmeter::makeMeasurement(), OptOSensor2D::makeMeasurement(), and OptOCOPS::makeMeasurement().
{
theValueSimulated[coor] = value;
}
Definition at line 192 of file Measurement.h.
References theValueSimulated_orig, and value().
Referenced by calculateOriginalSimulatedValue().
{
theValueSimulated_orig[coor] = value;
}
| virtual void Measurement::setXlaserLine | ( | ALIuint | ii, |
| int | val | ||
| ) | [inline, virtual] |
Reimplemented in MeasurementCOPS.
Definition at line 209 of file Measurement.h.
Referenced by OptOCOPS::makeMeasurement().
{ };
| const ALIdouble* Measurement::sigma | ( | ) | const [inline] |
Definition at line 132 of file Measurement.h.
References theSigma.
Referenced by copyMeas(), MeasurementDistancemeter::correctValueAndSigma(), MeasurementDistancemeter3dim::correctValueAndSigma(), MeasurementTiltmeter::correctValueAndSigma(), CocoaToDDLMgr::measurementsAsSpecPars(), Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().
{
return theSigma;
}
| virtual const ALIdouble Measurement::sigmaDimensionFactor | ( | ) | const [inline, virtual] |
Definition at line 148 of file Measurement.h.
References ALIUtils::LengthSigmaDimensionFactor().
Referenced by constructFromOA(), fillData(), and MeasurementTiltmeter::setConversionFactor().
{
return ALIUtils::LengthSigmaDimensionFactor();
}
| void Measurement::Substitute2p | ( | ALIstring & | ref, |
| const ALIstring & | firstref, | ||
| int | NtwoPoints | ||
| ) | [protected] |
Definition at line 423 of file Measurement.cc.
References gather_cfg::cout, ALIUtils::debug, and pickleFileParser::slash.
Referenced by buildOptOList().
{
// '/' sets hierarchy of OptOs
ALIstring slash("/");
int pos1st = firstref.length();
// Go back an '/' in firstref for each '..' in ref
for (int ii=0; ii < Ntwopoints; ii++) {
pos1st = firstref.find_last_of( slash, pos1st-1);
if ( ALIUtils::debug >=9 ) std::cout << "pos1st=" << pos1st;
}
if ( ALIUtils::debug >=9 ) std::cout << "before change ref: " << ref << " 1ref " << firstref << std::endl;
// Substitute name
ref.replace( 0, (Ntwopoints*3)-1, firstref, 0, pos1st);
if ( ALIUtils::debug >=9 ) std::cout << "after change ref: " << ref << " 1ref " << firstref << std::endl;
}
| const ALIstring& Measurement::type | ( | ) | const [inline] |
Definition at line 86 of file Measurement.h.
References theType.
Referenced by MeasurementCOPS::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), MeasurementDistancemeter::calculateSimulatedValue(), construct(), constructFromOA(), copyMeas(), Model::copyMeasurements(), CocoaToDDLMgr::measurementsAsSpecPars(), printStartCalculateSimulatedValue(), setName(), and setType().
{
return theType;
}
| const ALIdouble* Measurement::value | ( | ) | const [inline] |
Definition at line 125 of file Measurement.h.
References theValue.
Referenced by MeasurementDiffEntry::calculateSimulatedValue(), copyMeas(), MeasurementCOPS::correctValueAndSigma(), MeasurementDistancemeter::correctValueAndSigma(), MeasurementDistancemeter3dim::correctValueAndSigma(), MeasurementSensor2D::correctValueAndSigma(), MeasurementTiltmeter::correctValueAndSigma(), OptOSensor2D::fastTraversesLightRay(), OptODistancemeter::makeMeasurement(), OptODistancemeter3dim::makeMeasurement(), OptOTiltmeter::makeMeasurement(), OptOSensor2D::makeMeasurement(), OptOCOPS::makeMeasurement(), CocoaToDDLMgr::measurementsAsSpecPars(), setValueSimulated(), and setValueSimulated_orig().
{
return theValue;
}
| virtual const ALIdouble Measurement::valueDimensionFactor | ( | ) | const [inline, virtual] |
Definition at line 144 of file Measurement.h.
References ALIUtils::LengthValueDimensionFactor().
Referenced by constructFromOA(), fillData(), MeasurementTiltmeter::setConversionFactor(), MeasurementSensor2D::setConversionFactor(), and MeasurementCOPS::setConversionFactor().
{
return ALIUtils::LengthValueDimensionFactor();
}
| bool Measurement::valueIsSimulated | ( | ALIint | coor | ) | [inline] |
Definition at line 205 of file Measurement.h.
References theValueIsSimulated.
Referenced by calculateOriginalSimulatedValue(), construct(), copyMeas(), and CocoaToDDLMgr::measurementsAsSpecPars().
{
return theValueIsSimulated[coor];
}
Definition at line 117 of file Measurement.h.
References theValueSimulated.
Referenced by calculateOriginalSimulatedValue(), MeasurementDiffEntry::calculateSimulatedValue(), copyMeas(), OptODistancemeter::makeMeasurement(), OptODistancemeter3dim::makeMeasurement(), OptOTiltmeter::makeMeasurement(), OptOSensor2D::makeMeasurement(), and OptOCOPS::makeMeasurement().
{
return theValueSimulated[ii];
}
Definition at line 121 of file Measurement.h.
References theValueSimulated_orig.
Referenced by copyMeas().
{
return theValueSimulated_orig[ii];
}
Definition at line 140 of file Measurement.h.
References theValueType.
Referenced by OptOSensor2D::makeMeasurement(), CocoaToDDLMgr::measurementsAsSpecPars(), Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().
{
return theValueType[ii];
}
| virtual int Measurement::xlaserLine | ( | ALIuint | ii | ) | [inline, virtual] |
Reimplemented in MeasurementCOPS.
Definition at line 199 of file Measurement.h.
References dtNoiseDBValidation_cfg::cerr.
Referenced by OptOCOPS::makeMeasurement().
{ std::cerr << "!!!! Measurement::xlaserLine is not returning anything " << std::endl; abort(); };
std::vector<OpticalObject*> Measurement::_OptOList [private] |
Definition at line 256 of file Measurement.h.
Referenced by AddOptOListItem(), buildAffectingEntryList(), buildOptOList(), getMeasuringBehaviour(), getPreviousOptO(), and OptOList().
std::vector<ALIstring> Measurement::_OptONameList [private] |
Definition at line 254 of file Measurement.h.
Referenced by AddOptONameListItem(), buildOptOList(), buildOptONamesList(), constructFromOA(), getMeasuringBehaviour(), OptONameList(), and setName().
ALIdouble Measurement::cameraScaleFactor = 1. [static] |
Definition at line 209 of file Measurement.h.
Referenced by Fit::FillMatricesWithMeasurements().
ALIbool Measurement::only1 = 0 [static] |
Definition at line 267 of file Measurement.h.
Referenced by Fit::fitNextEvent(), Model::readMeasurementsFromFile(), and Model::readSystemDescription().
ALIstring Measurement::only1Date = "" [static] |
Definition at line 268 of file Measurement.h.
Referenced by Model::readMeasurementsFromFile(), and Model::readSystemDescription().
ALIstring Measurement::only1Time = "" [static] |
Definition at line 269 of file Measurement.h.
Referenced by Model::readMeasurementsFromFile(), and Model::readSystemDescription().
std::vector<Entry*> Measurement::theAffectingEntryList [private] |
Definition at line 258 of file Measurement.h.
Referenced by addAffectingEntriesFromOptO(), and affectingEntryList().
ALIstring Measurement::theCurrentDate = "99/99/99" [static, private] |
Definition at line 264 of file Measurement.h.
Referenced by getCurrentDate(), and setCurrentDate().
ALIstring Measurement::theCurrentTime = "99:99" [static, private] |
Definition at line 265 of file Measurement.h.
Referenced by getCurrentTime(), and setCurrentDate().
ALIuint Measurement::theDim [private] |
Definition at line 235 of file Measurement.h.
Referenced by copyMeas(), DerivativeRespectEntry(), dim(), fillData(), Measurement(), and SetDimension().
CLHEP::Hep3Vector Measurement::theLightRayDirection [private] |
Definition at line 261 of file Measurement.h.
Referenced by getLightRayDirection(), and setLightRayDirection().
CLHEP::Hep3Vector Measurement::theLightRayPosition [private] |
Definition at line 260 of file Measurement.h.
Referenced by getLightRayPosition(), and setLightRayPosition().
ALIstring Measurement::theMeasurementsFileName = "" [static, private] |
Definition at line 262 of file Measurement.h.
Referenced by measurementsFileName(), and setMeasurementsFileName().
ALIstring Measurement::theName [private] |
Definition at line 239 of file Measurement.h.
Referenced by copyMeas(), name(), sensorName(), and setName().
ALIdouble* Measurement::theSigma [private] |
Definition at line 238 of file Measurement.h.
Referenced by copyMeas(), fillData(), Measurement(), setSigma(), sigma(), and ~Measurement().
ALIstring Measurement::theType [private] |
Definition at line 236 of file Measurement.h.
Referenced by copyMeas(), setType(), and type().
ALIdouble* Measurement::theValue [private] |
Definition at line 237 of file Measurement.h.
Referenced by copyMeas(), fillData(), Measurement(), setValue(), value(), and ~Measurement().
ALIbool* Measurement::theValueIsSimulated [private] |
Definition at line 251 of file Measurement.h.
Referenced by copyMeas(), fillData(), Measurement(), and valueIsSimulated().
ALIdouble* Measurement::theValueSimulated [private] |
Definition at line 243 of file Measurement.h.
Referenced by copyMeas(), DerivativeRespectEntry(), Measurement(), setValueSimulated(), and valueSimulated().
ALIdouble* Measurement::theValueSimulated_orig [private] |
Definition at line 245 of file Measurement.h.
Referenced by copyMeas(), DerivativeRespectEntry(), Measurement(), setValueSimulated_orig(), and valueSimulated_orig().
ALIstring* Measurement::theValueType [private] |
Definition at line 240 of file Measurement.h.
Referenced by fillData(), Measurement(), and valueType().
1.7.3