#include <AlignmentProducer.h>

Inheritance diagram for AlignmentProducer:

Public Types
typedef std::vector< Alignable * >	Alignables
typedef std::pair< const Trajectory , const reco::Track >	ConstTrajTrackPair
typedef std::vector < ConstTrajTrackPair >	ConstTrajTrackPairCollection
typedef AlignmentAlgorithmBase::RunNumber	RunNumber
typedef AlignmentAlgorithmBase::RunRange	RunRange
typedef std::vector< RunRange >	RunRanges
Public Member Functions
	AlignmentProducer (const edm::ParameterSet &iConfig)
	Constructor.
virtual void	beginLuminosityBlock (const edm::LuminosityBlock &lumiBlock, const edm::EventSetup &setup)
	Called at lumi block start, calling algorithm's beginLuminosityBlock.
virtual void	beginOfJob (const edm::EventSetup &)
	Called at beginning of job.
virtual void	beginRun (const edm::Run &run, const edm::EventSetup &setup)
	Called at run start and calling algorithms beginRun.
virtual Status	duringLoop (const edm::Event &event, const edm::EventSetup &setup)
	Called at each event.
virtual void	endLuminosityBlock (const edm::LuminosityBlock &lumiBlock, const edm::EventSetup &setup)
	Called at lumi block end, calling algorithm's endLuminosityBlock.
virtual void	endOfJob ()
	Called at end of job.
virtual Status	endOfLoop (const edm::EventSetup &, unsigned int iLoop)
	Called at end of loop.
virtual void	endRun (const edm::Run &run, const edm::EventSetup &setup)
	Called at run end - currently reading TkFittedLasBeam if an InpuTag is given for that.
virtual boost::shared_ptr < CSCGeometry >	produceCSC (const MuonGeometryRecord &iRecord)
	Produce the muon CSC geometry.
virtual boost::shared_ptr < DTGeometry >	produceDT (const MuonGeometryRecord &iRecord)
	Produce the muon DT geometry.
virtual boost::shared_ptr < TrackerGeometry >	produceTracker (const TrackerDigiGeometryRecord &iRecord)
	Produce the tracker geometry.
virtual void	startingNewLoop (unsigned int iLoop)
	Called at beginning of loop.
	~AlignmentProducer ()
	Destructor.
Private Member Functions
void	addSurveyInfo_ (Alignable *)
	Add survey info to an alignable.
template<class G , class Rcd , class ErrRcd >
void	applyDB (G *geometry, const edm::EventSetup &iSetup, const AlignTransform &globalPosition) const
template<class G , class DeformationRcd >
void	applyDB (G *geometry, const edm::EventSetup &iSetup) const
	Apply DB constants for surface deformations.
void	createGeometries_ (const edm::EventSetup &)
	Create tracker and muon geometries.
RunRanges	makeNonOverlappingRunRanges (const edm::VParameterSet &RunRangeSelectionVPSet)
void	readInSurveyRcds (const edm::EventSetup &)
	read in survey records
void	simpleMisalignment_ (const Alignables &alivec, const std::string &selection, float shift, float rot, bool local)
	Apply random shifts and rotations to selected alignables, according to configuration.
void	writeDB (AlignmentSurfaceDeformations *alignmentSurfaceDeformations, const std::string &surfaceDeformationRcd, cond::Time_t time) const
void	writeDB (Alignments alignments, const std::string &alignRcd, AlignmentErrors alignmentErrors, const std::string &errRcd, const AlignTransform *globalCoordinates, cond::Time_t time) const
void	writeForRunRange (cond::Time_t time)
Private Attributes
const bool	applyDbAlignment_
const edm::InputTag	beamSpotTag_
const bool	checkDbAlignmentValidity_
const edm::InputTag	clusterValueMapTag_
const bool	doMisalignmentScenario_
const bool	doMuon_
const bool	doTracker_
const Alignments *	globalPositions_
	GlobalPositions that might be read from DB, NULL otherwise.
int	nevent_
const bool	saveApeToDB_
const bool	saveDeformationsToDB_
const bool	saveToDB_
const int	stNFixAlignables_
const double	stRandomRotation_
const double	stRandomShift_
AlignableExtras *	theAlignableExtras
AlignableMuon *	theAlignableMuon
AlignableTracker *	theAlignableTracker
AlignmentAlgorithmBase *	theAlignmentAlgo
AlignmentParameterStore *	theAlignmentParameterStore
const unsigned int	theMaxLoops
std::vector < AlignmentMonitorBase * >	theMonitors
boost::shared_ptr< CSCGeometry >	theMuonCSC
boost::shared_ptr< DTGeometry >	theMuonDT
edm::ParameterSet	theParameterSet
const SurveyErrors *	theSurveyErrors
unsigned int	theSurveyIndex
const Alignments *	theSurveyValues
boost::shared_ptr < TrackerGeometry >	theTracker
const edm::InputTag	tjTkAssociationMapTag_
const edm::InputTag	tkLasBeamTag_
const bool	useExtras_
const bool	useSurvey_
edm::ESWatcher< CSCSurveyErrorRcd >	watchCSCSurveyErrRcd_
edm::ESWatcher< CSCSurveyRcd >	watchCSCSurveyRcd_
edm::ESWatcher< DTSurveyErrorRcd >	watchDTSurveyErrRcd_
edm::ESWatcher< DTSurveyRcd >	watchDTSurveyRcd_
edm::ESWatcher < TrackerSurveyErrorRcd >	watchTkSurveyErrRcd_
edm::ESWatcher< TrackerSurveyRcd >	watchTkSurveyRcd_

Detailed Description

Package : Alignment/CommonAlignmentProducer Description : calls alignment algorithms

Author:: : Frederic Ronga Revision :

Revision:: 1.25

last update:

Date:: 2012/02/01 13:55:23

by :

Author:: mussgill

Definition at line 55 of file AlignmentProducer.h.

Member Typedef Documentation

typedef std::vector<Alignable*> AlignmentProducer::Alignables

Definition at line 59 of file AlignmentProducer.h.

typedef std::pair<const Trajectory*, const reco::Track*> AlignmentProducer::ConstTrajTrackPair

Definition at line 60 of file AlignmentProducer.h.

typedef std::vector<ConstTrajTrackPair> AlignmentProducer::ConstTrajTrackPairCollection

Definition at line 61 of file AlignmentProducer.h.

typedef AlignmentAlgorithmBase::RunNumber AlignmentProducer::RunNumber

Definition at line 63 of file AlignmentProducer.h.

typedef AlignmentAlgorithmBase::RunRange AlignmentProducer::RunRange

Definition at line 64 of file AlignmentProducer.h.

typedef std::vector<RunRange> AlignmentProducer::RunRanges

Definition at line 65 of file AlignmentProducer.h.

Constructor & Destructor Documentation

AlignmentProducer::AlignmentProducer ( const edm::ParameterSet & iConfig )

Constructor.

Definition at line 76 of file AlignmentProducer.cc.

References edm::ParameterSet::addUntrackedParameter(), doMuon_, doTracker_, Exception, reco::get(), edm::ParameterSet::getParameter(), edm::ParameterSet::getUntrackedParameter(), produceCSC(), produceDT(), produceTracker(), edm::ESProducer::setWhatProduced(), theAlignmentAlgo, and theMonitors.

                                                                   :
  theAlignmentAlgo(0), theAlignmentParameterStore(0),
  theAlignableExtras(0), theAlignableTracker(0), theAlignableMuon(0), 
  globalPositions_(0),
  nevent_(0), theParameterSet(iConfig),
  theMaxLoops( iConfig.getUntrackedParameter<unsigned int>("maxLoops") ),
  stNFixAlignables_(iConfig.getParameter<int>("nFixAlignables") ),
  stRandomShift_(iConfig.getParameter<double>("randomShift")),
  stRandomRotation_(iConfig.getParameter<double>("randomRotation")),
  applyDbAlignment_( iConfig.getUntrackedParameter<bool>("applyDbAlignment")),
  checkDbAlignmentValidity_( iConfig.getUntrackedParameter<bool>("checkDbAlignmentValidity")),
  doMisalignmentScenario_(iConfig.getParameter<bool>("doMisalignmentScenario")),
  saveToDB_(iConfig.getParameter<bool>("saveToDB")),
  saveApeToDB_(iConfig.getParameter<bool>("saveApeToDB")),
  saveDeformationsToDB_(iConfig.getParameter<bool>("saveDeformationsToDB")),
  doTracker_( iConfig.getUntrackedParameter<bool>("doTracker") ),
  doMuon_( iConfig.getUntrackedParameter<bool>("doMuon") ),
  useExtras_( iConfig.getUntrackedParameter<bool>("useExtras") ),
  useSurvey_( iConfig.getParameter<bool>("useSurvey") ),
  tjTkAssociationMapTag_(iConfig.getParameter<edm::InputTag>("tjTkAssociationMapTag")),
  beamSpotTag_(iConfig.getParameter<edm::InputTag>("beamSpotTag")),
  tkLasBeamTag_(iConfig.getParameter<edm::InputTag>("tkLasBeamTag")),
  clusterValueMapTag_(iConfig.getParameter<edm::InputTag>("hitPrescaleMapTag"))
{
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::AlignmentProducer";

  // Tell the framework what data is being produced
  if (doTracker_) {
     setWhatProduced(this, &AlignmentProducer::produceTracker);
  }
  if (doMuon_) {
     setWhatProduced(this, &AlignmentProducer::produceDT);
     setWhatProduced(this, &AlignmentProducer::produceCSC);
  }

  // Create the alignment algorithm
  edm::ParameterSet algoConfig = iConfig.getParameter<edm::ParameterSet>( "algoConfig" );
  edm::VParameterSet iovSelection = iConfig.getParameter<edm::VParameterSet>( "RunRangeSelection" );
  algoConfig.addUntrackedParameter<edm::VParameterSet>( "RunRangeSelection", iovSelection );
  std::string algoName = algoConfig.getParameter<std::string>( "algoName" );
  theAlignmentAlgo = AlignmentAlgorithmPluginFactory::get( )->create( algoName, algoConfig  );

  // Check if found
  if ( !theAlignmentAlgo )
        throw cms::Exception("BadConfig") << "Couldn't find algorithm called " << algoName;

  edm::ParameterSet monitorConfig = iConfig.getParameter<edm::ParameterSet>( "monitorConfig" );
  std::vector<std::string> monitors = monitorConfig.getUntrackedParameter<std::vector<std::string> >( "monitors" );

  for (std::vector<std::string>::const_iterator miter = monitors.begin();  miter != monitors.end();  ++miter) {
    AlignmentMonitorBase* newMonitor = AlignmentMonitorPluginFactory::get()->create(*miter, monitorConfig.getUntrackedParameter<edm::ParameterSet>(*miter));

    if (!newMonitor) throw cms::Exception("BadConfig") << "Couldn't find monitor named " << *miter;

    theMonitors.push_back(newMonitor);
  }
}

AlignmentProducer::~AlignmentProducer ( )

Destructor.

Definition at line 137 of file AlignmentProducer.cc.

References globalPositions_, theAlignableExtras, theAlignableMuon, theAlignableTracker, theAlignmentAlgo, and theAlignmentParameterStore.

{
  delete theAlignmentAlgo;

  delete theAlignmentParameterStore;
  delete theAlignableExtras;
  delete theAlignableTracker;
  delete theAlignableMuon;

  delete globalPositions_;
}

Member Function Documentation

void AlignmentProducer::addSurveyInfo_ ( Alignable * ali ) [private]

Add survey info to an alignable.

Definition at line 622 of file AlignmentProducer.cc.

References Alignable::alignableObjectId(), Alignable::components(), error, Exception, i, Alignable::id(), AlignableSurface::length(), Alignments::m_align, SurveyErrors::m_surveyErrors, SurveyError::matrix(), pos, SurveyError::rawId(), makeMuonMisalignmentScenario::rot, AlignableSurface::setLength(), Alignable::setSurvey(), AlignableSurface::setWidth(), SurveyError::structureType(), Alignable::surface(), theSurveyErrors, theSurveyIndex, theSurveyValues, and AlignableSurface::width().

Referenced by readInSurveyRcds().

{
  const std::vector<Alignable*>& comp = ali->components();

  unsigned int nComp = comp.size();

  for (unsigned int i = 0; i < nComp; ++i) addSurveyInfo_(comp[i]);

  const SurveyError& error = theSurveyErrors->m_surveyErrors[theSurveyIndex];

  if ( ali->id() != error.rawId() ||
       ali->alignableObjectId() != error.structureType() )
  {
    throw cms::Exception("DatabaseError")
      << "Error reading survey info from DB. Mismatched id!";
  }

  const CLHEP::Hep3Vector&  pos = theSurveyValues->m_align[theSurveyIndex].translation();
  const CLHEP::HepRotation& rot = theSurveyValues->m_align[theSurveyIndex].rotation();

  AlignableSurface surf( align::PositionType( pos.x(), pos.y(), pos.z() ),
                         align::RotationType( rot.xx(), rot.xy(), rot.xz(),
                                              rot.yx(), rot.yy(), rot.yz(),
                                              rot.zx(), rot.zy(), rot.zz() ) );

  surf.setWidth( ali->surface().width() );
  surf.setLength( ali->surface().length() );

  ali->setSurvey( new SurveyDet( surf, error.matrix() ) );

  ++theSurveyIndex;
}

template<class G , class Rcd , class ErrRcd >

void AlignmentProducer::applyDB	(	G *	geometry,
		const edm::EventSetup &	iSetup,
		const AlignTransform &	globalPosition
	)		const `[private]`

Apply DB constants belonging to (Err)Rcd to geometry, taking into account 'globalPosition' correction.

Definition at line 721 of file AlignmentProducer.cc.

References GeometryAligner::applyAlignments(), edm::IOVSyncValue::beginOfTime(), checkDbAlignmentValidity_, edm::IOVSyncValue::endOfTime(), edm::IOVSyncValue::eventID(), Exception, first, edm::ValidityInterval::first(), geometry, edm::EventSetup::get(), edm::ValidityInterval::last(), prof2calltree::last, and record.

{
  // 'G' is the geometry class for that DB should be applied,
  // 'Rcd' is the record class for its Alignments 
  // 'ErrRcd' is the record class for its AlignmentErrors
  // 'globalCoordinates' are global transformation for this geometry

  const Rcd & record = iSetup.get<Rcd>();
  if (checkDbAlignmentValidity_) {
    const edm::ValidityInterval & validity = record.validityInterval();
    const edm::IOVSyncValue first = validity.first();
    const edm::IOVSyncValue last = validity.last();
    if (first!=edm::IOVSyncValue::beginOfTime() ||
        last!=edm::IOVSyncValue::endOfTime()) {
      throw cms::Exception("DatabaseError")
        << "@SUB=AlignmentProducer::applyDB"
        << "\nTrying to apply "
        << record.key().name()
        << " with multiple IOVs in tag.\n"
        << "Validity range is "
        << first.eventID().run() << " - " << last.eventID().run();
    }
  }

  edm::ESHandle<Alignments> alignments;
  record.get(alignments);

  edm::ESHandle<AlignmentErrors> alignmentErrors;
  iSetup.get<ErrRcd>().get(alignmentErrors);

  GeometryAligner aligner;
  aligner.applyAlignments<G>(geometry, &(*alignments), &(*alignmentErrors),
                             globalCoordinates);
}

template<class G , class DeformationRcd >

void AlignmentProducer::applyDB	(	G *	geometry,
		const edm::EventSetup &	iSetup
	)		const `[private]`

Apply DB constants for surface deformations.

Definition at line 762 of file AlignmentProducer.cc.

References GeometryAligner::attachSurfaceDeformations(), edm::IOVSyncValue::beginOfTime(), checkDbAlignmentValidity_, edm::IOVSyncValue::endOfTime(), edm::IOVSyncValue::eventID(), Exception, first, edm::ValidityInterval::first(), geometry, edm::EventSetup::get(), edm::ValidityInterval::last(), prof2calltree::last, and record.

{
  // 'G' is the geometry class for that DB should be applied,
  // 'DeformationRcd' is the record class for its surface deformations 

  const DeformationRcd & record = iSetup.get<DeformationRcd>();
  if (checkDbAlignmentValidity_) {
    const edm::ValidityInterval & validity = record.validityInterval();
    const edm::IOVSyncValue first = validity.first();
    const edm::IOVSyncValue last = validity.last();
    if (first!=edm::IOVSyncValue::beginOfTime() ||
        last!=edm::IOVSyncValue::endOfTime()) {
      throw cms::Exception("DatabaseError")
        << "@SUB=AlignmentProducer::applyDB"
        << "\nTrying to apply "
        << record.key().name()
        << " with multiple IOVs in tag.\n"
        << "Validity range is "
        << first.eventID().run() << " - " << last.eventID().run();
    }
  }
  edm::ESHandle<AlignmentSurfaceDeformations> surfaceDeformations;
  record.get(surfaceDeformations);

  GeometryAligner aligner;
  aligner.attachSurfaceDeformations<G>(geometry, &(*surfaceDeformations));
}

void AlignmentProducer::beginLuminosityBlock	(	const edm::LuminosityBlock &	lumiBlock,
		const edm::EventSetup &	setup
	)		`[virtual]`

Called at lumi block start, calling algorithm's beginLuminosityBlock.

Reimplemented from edm::EDLooperBase.

Definition at line 514 of file AlignmentProducer.cc.

References AlignmentAlgorithmBase::beginLuminosityBlock(), and theAlignmentAlgo.

{
  theAlignmentAlgo->beginLuminosityBlock(setup); // do not forward edm::LuminosityBlock
}

void AlignmentProducer::beginOfJob ( const edm::EventSetup & iSetup ) [virtual]

Called at beginning of job.

Reimplemented from edm::EDLooperBase.

Definition at line 180 of file AlignmentProducer.cc.

References align::AlignableMuon, AlignmentParameterStore_cfi::AlignmentParameterStore, applyDbAlignment_, TrackerScenarioBuilder::applyScenario(), MuonScenarioBuilder::applyScenario(), createGeometries_(), align::DetectorGlobalPosition(), doMisalignmentScenario_, doMuon_, doTracker_, edm::EventSetup::get(), edm::ParameterSet::getParameter(), globalPositions_, AlignmentAlgorithmBase::initialize(), DetId::Muon, simpleMisalignment_(), stNFixAlignables_, stRandomRotation_, stRandomShift_, theAlignableExtras, theAlignableMuon, theAlignableTracker, theAlignmentAlgo, theAlignmentParameterStore, theMonitors, theMuonCSC, theMuonDT, theParameterSet, theTracker, DetId::Tracker, and useExtras_.

{
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::beginOfJob";

  // Create the geometries from the ideal geometries (first time only)
  this->createGeometries_( iSetup );
  
  // Retrieve and apply alignments, if requested (requires DB setup)
  if ( applyDbAlignment_ ) {
    // we need GlobalPositionRcd - and have to keep track for later removal
    // before writing again to DB...
    edm::ESHandle<Alignments> globalPositionRcd;
    iSetup.get<GlobalPositionRcd>().get(globalPositionRcd);
    globalPositions_ = new Alignments(*globalPositionRcd);

    if ( doTracker_ ) {     // apply to tracker
      this->applyDB<TrackerGeometry,TrackerAlignmentRcd,TrackerAlignmentErrorRcd>
        (&(*theTracker), iSetup,  
         align::DetectorGlobalPosition(*globalPositions_, DetId(DetId::Tracker)));
      this->applyDB<TrackerGeometry,TrackerSurfaceDeformationRcd>(&(*theTracker), iSetup);
    }
    
    if ( doMuon_ ) { // apply to tracker
      this->applyDB<DTGeometry,DTAlignmentRcd,DTAlignmentErrorRcd>
        (&(*theMuonDT), iSetup,
         align::DetectorGlobalPosition(*globalPositions_, DetId(DetId::Muon)));
      this->applyDB<CSCGeometry,CSCAlignmentRcd,CSCAlignmentErrorRcd>
        (&(*theMuonCSC), iSetup,
         align::DetectorGlobalPosition(*globalPositions_, DetId(DetId::Muon)));
    }
  }

  // Create alignable tracker and muon 
  if (doTracker_) {
    theAlignableTracker = new AlignableTracker( &(*theTracker) );
  }

  if (doMuon_) {
     theAlignableMuon = new AlignableMuon( &(*theMuonDT), &(*theMuonCSC) );
  }

  if (useExtras_) {
    theAlignableExtras = new AlignableExtras();
  }

  // Create alignment parameter builder
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::beginOfJob" 
                            << "Creating AlignmentParameterBuilder";
  edm::ParameterSet aliParamBuildCfg = 
    theParameterSet.getParameter<edm::ParameterSet>("ParameterBuilder");
  AlignmentParameterBuilder alignmentParameterBuilder(theAlignableTracker,
                                                      theAlignableMuon,
                                                      theAlignableExtras,
                                                      aliParamBuildCfg );
  // Fix alignables if requested
  if (stNFixAlignables_>0) alignmentParameterBuilder.fixAlignables(stNFixAlignables_);

  // Get list of alignables
  Alignables theAlignables = alignmentParameterBuilder.alignables();
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::beginOfJob" 
                            << "got " << theAlignables.size() << " alignables";

  // Create AlignmentParameterStore 
  edm::ParameterSet aliParamStoreCfg = 
    theParameterSet.getParameter<edm::ParameterSet>("ParameterStore");
  theAlignmentParameterStore = new AlignmentParameterStore(theAlignables, aliParamStoreCfg);
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::beginOfJob" 
                            << "AlignmentParameterStore created!";

  // Apply misalignment scenario to alignable tracker and muon if requested
  // WARNING: this assumes scenarioConfig can be passed to both muon and tracker
  if (doMisalignmentScenario_ && (doTracker_ || doMuon_)) {
    edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::beginOfJob" 
                              << "Applying misalignment scenario to "
                              << (doTracker_ ? "tracker" : "")
                              << (doMuon_    ? (doTracker_ ? " and muon" : "muon") : ".");
    edm::ParameterSet scenarioConfig 
      = theParameterSet.getParameter<edm::ParameterSet>( "MisalignmentScenario" );
    if (doTracker_) {
      TrackerScenarioBuilder scenarioBuilder( theAlignableTracker );
      scenarioBuilder.applyScenario( scenarioConfig );
    }
    if (doMuon_) {
      MuonScenarioBuilder muonScenarioBuilder( theAlignableMuon );
      muonScenarioBuilder.applyScenario( scenarioConfig );
    }
  } else {
    edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::beginOfJob" 
                              << "NOT applying misalignment scenario!";
  }

  // Apply simple misalignment
  const std::string sParSel(theParameterSet.getParameter<std::string>("parameterSelectorSimple"));
  this->simpleMisalignment_(theAlignables, sParSel, stRandomShift_, stRandomRotation_, true);

  // Initialize alignment algorithm
  theAlignmentAlgo->initialize( iSetup, 
                                theAlignableTracker, theAlignableMuon, theAlignableExtras,
                                theAlignmentParameterStore );

  for (std::vector<AlignmentMonitorBase*>::const_iterator monitor = theMonitors.begin();
       monitor != theMonitors.end();  ++monitor) {
     (*monitor)->beginOfJob(theAlignableTracker, theAlignableMuon, theAlignmentParameterStore);
  }
}

void AlignmentProducer::beginRun	(	const edm::Run &	run,
		const edm::EventSetup &	setup
	)		`[virtual]`

Called at run start and calling algorithms beginRun.

Reimplemented from edm::EDLooperBase.

Definition at line 489 of file AlignmentProducer.cc.

References AlignmentAlgorithmBase::beginRun(), and theAlignmentAlgo.

{
  theAlignmentAlgo->beginRun(setup); // do not forward edm::Run...
}

void AlignmentProducer::createGeometries_ ( const edm::EventSetup & iSetup ) [private]

Create tracker and muon geometries.

Definition at line 598 of file AlignmentProducer.cc.

References DTGeometryBuilderFromDDD::build(), CSCGeometryBuilderFromDDD::build(), TrackerGeomBuilderFromGeometricDet::build(), doMuon_, doTracker_, edm::EventSetup::get(), theMuonCSC, theMuonDT, and theTracker.

Referenced by beginOfJob().

{
   edm::ESTransientHandle<DDCompactView> cpv;
   iSetup.get<IdealGeometryRecord>().get( cpv );

   if (doTracker_) {
     edm::ESHandle<GeometricDet> geometricDet;
     iSetup.get<IdealGeometryRecord>().get( geometricDet );
     TrackerGeomBuilderFromGeometricDet trackerBuilder;
     theTracker = boost::shared_ptr<TrackerGeometry>( trackerBuilder.build(&(*geometricDet)) );
   }

   if (doMuon_) {
     edm::ESHandle<MuonDDDConstants> mdc;
     iSetup.get<MuonNumberingRecord>().get(mdc);
     DTGeometryBuilderFromDDD DTGeometryBuilder;
     CSCGeometryBuilderFromDDD CSCGeometryBuilder;
     theMuonDT = boost::shared_ptr<DTGeometry>(new DTGeometry );
     DTGeometryBuilder.build( theMuonDT, &(*cpv), *mdc);
     theMuonCSC = boost::shared_ptr<CSCGeometry>( new CSCGeometry );
     CSCGeometryBuilder.build( theMuonCSC, &(*cpv), *mdc );
   }
}

edm::EDLooper::Status AlignmentProducer::duringLoop	(	const edm::Event &	event,
		const edm::EventSetup &	setup
	)		`[virtual]`

Called at each event.

Implements edm::EDLooper.

Definition at line 427 of file AlignmentProducer.cc.

References SiPixelRawToDigiRegional_cfi::beamSpot, beamSpotTag_, clusterValueMapTag_, edm::InputTag::encode(), ZMuMuCategoriesSequences_cff::eventInfo, edm::Event::getByLabel(), i, edm::EventBase::id(), AlignableExtras::initializeBeamSpot(), edm::EDLooperBase::kContinue, nevent_, readInSurveyRcds(), AlignmentAlgorithmBase::run(), theAlignableExtras, theAlignmentAlgo, theMonitors, and tjTkAssociationMapTag_.

{
  ++nevent_;

  // reading in survey records
  this->readInSurveyRcds(setup);
        
  // Printout event number
  for ( int i=10; i<10000000; i*=10 )
    if ( nevent_<10*i && (nevent_%i)==0 )
      edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::duringLoop" 
                                << "Events processed: " << nevent_;
  
  // Retrieve trajectories and tracks from the event
  // -> merely skip if collection is empty
  edm::Handle<TrajTrackAssociationCollection> m_TrajTracksMap;
  if (event.getByLabel(tjTkAssociationMapTag_, m_TrajTracksMap)) {
    
    // Form pairs of trajectories and tracks
    ConstTrajTrackPairCollection trajTracks;
    for ( TrajTrackAssociationCollection::const_iterator iPair = m_TrajTracksMap->begin();
          iPair != m_TrajTracksMap->end(); ++iPair) {
      trajTracks.push_back( ConstTrajTrackPair( &(*(*iPair).key), &(*(*iPair).val) ) );
    }
    edm::Handle<reco::BeamSpot> beamSpot;
    event.getByLabel(beamSpotTag_, beamSpot);

    if (nevent_==1 && theAlignableExtras) {
      edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::duringLoop"
                                << "initializing AlignableBeamSpot" << std::endl;
      theAlignableExtras->initializeBeamSpot(beamSpot->x0(), beamSpot->y0(), beamSpot->z0(),
                                             beamSpot->dxdz(), beamSpot->dydz());
    }

    // Run the alignment algorithm with its input
    const AliClusterValueMap *clusterValueMapPtr = 0;
    if(clusterValueMapTag_.encode().size()){//check that the input tag is not empty
      edm::Handle<AliClusterValueMap> clusterValueMap;
      event.getByLabel(clusterValueMapTag_, clusterValueMap);
      clusterValueMapPtr = &(*clusterValueMap);
    }

    const AlignmentAlgorithmBase::EventInfo eventInfo(event.id(), trajTracks, *beamSpot,
                                                      clusterValueMapPtr);
    theAlignmentAlgo->run(setup, eventInfo);


    for (std::vector<AlignmentMonitorBase*>::const_iterator monitor = theMonitors.begin();
         monitor != theMonitors.end();  ++monitor) {
      (*monitor)->duringLoop(event, setup, trajTracks); // forward eventInfo?
    }
  } else {
    edm::LogError("Alignment") << "@SUB=AlignmentProducer::duringLoop" 
                               << "No track collection found: skipping event";
  }
  

  return kContinue;
}

void AlignmentProducer::endLuminosityBlock	(	const edm::LuminosityBlock &	lumiBlock,
		const edm::EventSetup &	setup
	)		`[virtual]`

Called at lumi block end, calling algorithm's endLuminosityBlock.

Reimplemented from edm::EDLooperBase.

Definition at line 521 of file AlignmentProducer.cc.

References AlignmentAlgorithmBase::endLuminosityBlock(), and theAlignmentAlgo.

{
  theAlignmentAlgo->endLuminosityBlock(setup); // do not forward edm::LuminosityBlock
}

void AlignmentProducer::endOfJob ( ) [virtual]

Called at end of job.

Reimplemented from edm::EDLooperBase.

Definition at line 288 of file AlignmentProducer.cc.

References AlignableExtras::beamSpot(), edm::ParameterSet::getParameter(), makeNonOverlappingRunRanges(), nevent_, AlignmentParameters::parameters(), cond::runnumber, saveApeToDB_, saveDeformationsToDB_, saveToDB_, AlignmentAlgorithmBase::setParametersForRunRange(), theAlignableExtras, theAlignmentAlgo, theMonitors, theParameterSet, cond::timeTypeSpecs, and writeForRunRange().

{
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::endOfJob";

  for (std::vector<AlignmentMonitorBase*>::const_iterator monitor = theMonitors.begin();  monitor != theMonitors.end();  ++monitor) {
     (*monitor)->endOfJob();
  }

  if (0 == nevent_) {
    edm::LogError("Alignment") << "@SUB=AlignmentProducer::endOfJob" << "Did not process any "
                               << "events in last loop, do not dare to store to DB.";
  } else {
    
    // Expand run ranges and make them unique
    edm::VParameterSet runRangeSelectionVPSet(theParameterSet.getParameter<edm::VParameterSet>("RunRangeSelection"));
    RunRanges uniqueRunRanges(this->makeNonOverlappingRunRanges(runRangeSelectionVPSet));
    if (uniqueRunRanges.empty()) { // create dummy IOV
      const RunRange runRange(cond::timeTypeSpecs[cond::runnumber].beginValue,
                              cond::timeTypeSpecs[cond::runnumber].endValue);
      uniqueRunRanges.push_back(runRange);
    }

    std::vector<AlgebraicVector> beamSpotParameters;

    for (RunRanges::const_iterator iRunRange = uniqueRunRanges.begin();
         iRunRange != uniqueRunRanges.end();
         ++iRunRange) {

      theAlignmentAlgo->setParametersForRunRange(*iRunRange);

      // Save alignments to database
      if (saveToDB_ || saveApeToDB_ || saveDeformationsToDB_)
        this->writeForRunRange((*iRunRange).first);
      
      // Deal with extra alignables, e.g. beam spot
      if (theAlignableExtras) {
        Alignables &alis = theAlignableExtras->beamSpot();
        if (!alis.empty()) {
          BeamSpotAlignmentParameters *beamSpotAliPars = dynamic_cast<BeamSpotAlignmentParameters*>(alis[0]->alignmentParameters());
          beamSpotParameters.push_back(beamSpotAliPars->parameters());
        }
      }
    }
    
    if (theAlignableExtras) {
      std::ostringstream bsOutput;
      
      std::vector<AlgebraicVector>::const_iterator itPar = beamSpotParameters.begin();
      for (RunRanges::const_iterator iRunRange = uniqueRunRanges.begin();
           iRunRange != uniqueRunRanges.end();
           ++iRunRange, ++itPar) {
        bsOutput << "Run range: " << (*iRunRange).first << " - " << (*iRunRange).second << "\n";
        bsOutput << "  Displacement: x=" << (*itPar)[0] << ", y=" << (*itPar)[1] << "\n"; 
        bsOutput << "  Slope: dx/dz=" << (*itPar)[2] << ", dy/dz=" << (*itPar)[3] << "\n"; 
      }
      
      edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::endOfJob"
                                << "Parameters for alignable beamspot:\n"
                                << bsOutput.str();
    }

  }
}

edm::EDLooper::Status AlignmentProducer::endOfLoop	(	const edm::EventSetup &	iSetup,
		unsigned int	iLoop
	)		`[virtual]`

Called at end of loop.

Implements edm::EDLooperBase.

Definition at line 396 of file AlignmentProducer.cc.

References edm::EDLooperBase::kContinue, edm::EDLooperBase::kStop, nevent_, AlignmentAlgorithmBase::terminate(), theAlignmentAlgo, theMaxLoops, and theMonitors.

{

  if (0 == nevent_) {
    // beginOfJob is usually called by the framework in the first event of the first loop
    // (a hack: beginOfJob needs the EventSetup that is not well defined without an event)
    // and the algorithms rely on the initialisations done in beginOfJob. We cannot call 
    // this->beginOfJob(iSetup); here either since that will access the EventSetup to get
    // some geometry information that is not defined either without having seen an event.
    edm::LogError("Alignment") << "@SUB=AlignmentProducer::endOfLoop" 
                               << "Did not process any events in loop " << iLoop
                               << ", stop processing without terminating algorithm.";
    return kStop;
  }

  edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::endOfLoop" 
                            << "Ending loop " << iLoop << ", terminating algorithm.";

  theAlignmentAlgo->terminate();

  for (std::vector<AlignmentMonitorBase*>::const_iterator monitor = theMonitors.begin();  monitor != theMonitors.end();  ++monitor) {
     (*monitor)->endOfLoop(iSetup);
  }

  if ( iLoop == theMaxLoops-1 || iLoop >= theMaxLoops ) return kStop;
  else return kContinue;
}

void AlignmentProducer::endRun	(	const edm::Run &	run,
		const edm::EventSetup &	setup
	)		`[virtual]`

Called at run end - currently reading TkFittedLasBeam if an InpuTag is given for that.

Reimplemented from edm::EDLooperBase.

Definition at line 495 of file AlignmentProducer.cc.

References edm::InputTag::encode(), AlignmentAlgorithmBase::endRun(), edm::Run::getByLabel(), edm::RunBase::id(), theAlignmentAlgo, and tkLasBeamTag_.

{
  // call with or without las beam info...
  typedef AlignmentAlgorithmBase::EndRunInfo EndRunInfo;
  if (tkLasBeamTag_.encode().size()) { // non-empty InputTag
    edm::Handle<TkFittedLasBeamCollection> lasBeams;
    edm::Handle<TsosVectorCollection> tsoses;
    run.getByLabel(tkLasBeamTag_, lasBeams);
    run.getByLabel(tkLasBeamTag_, tsoses);
    
    theAlignmentAlgo->endRun(EndRunInfo(run.id(), &(*lasBeams), &(*tsoses)), setup);
  } else {
    edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::endRun"
                              << "No Tk LAS beams to forward to algorithm.";
    theAlignmentAlgo->endRun(EndRunInfo(run.id(), 0, 0), setup);
  }
}

AlignmentProducer::RunRanges AlignmentProducer::makeNonOverlappingRunRanges ( const edm::VParameterSet & RunRangeSelectionVPSet ) [private]

Definition at line 912 of file AlignmentProducer.cc.

References first, i, cond::runnumber, groupFilesInBlocks::temp, cond::timeTypeSpecs, and edm::tokenize().

Referenced by endOfJob().

{
  static bool oldRunRangeSelectionWarning = false;

  const RunNumber beginValue = cond::timeTypeSpecs[cond::runnumber].beginValue;
  const RunNumber endValue = cond::timeTypeSpecs[cond::runnumber].endValue;
  
  RunRanges uniqueRunRanges;
  if (!RunRangeSelectionVPSet.empty()) {

    std::map<RunNumber,RunNumber> uniqueFirstRunNumbers;
    
    for (std::vector<edm::ParameterSet>::const_iterator ipset = RunRangeSelectionVPSet.begin();
         ipset != RunRangeSelectionVPSet.end();
         ++ipset) {
      const std::vector<std::string> RunRangeStrings = (*ipset).getParameter<std::vector<std::string> >("RunRanges");
      for (std::vector<std::string>::const_iterator irange = RunRangeStrings.begin();
           irange != RunRangeStrings.end();
           ++irange) {
        
        if ((*irange).find(':')==std::string::npos) {
          
          RunNumber first = beginValue;
          long int temp = strtol((*irange).c_str(), 0, 0);
          if (temp!=-1) first = temp;
          uniqueFirstRunNumbers[first] = first;
          
        } else {
          
          if (!oldRunRangeSelectionWarning) {
            edm::LogWarning("BadConfig") << "@SUB=AlignmentProducer::makeNonOverlappingRunRanges"
                                         << "Config file contains old format for 'RunRangeSelection'. Only the start run\n"
                                         << "number is used internally. The number of the last run is ignored and can be\n"
                                         << "safely removed from the config file.\n";
            oldRunRangeSelectionWarning = true;
          }
          
          std::vector<std::string> tokens = edm::tokenize(*irange, ":");
          long int temp;
          RunNumber first = beginValue;
          temp = strtol(tokens[0].c_str(), 0, 0);
          if (temp!=-1) first = temp;
          uniqueFirstRunNumbers[first] = first;
        }
      }
    }

    for (std::map<RunNumber,RunNumber>::iterator iFirst = uniqueFirstRunNumbers.begin();
         iFirst!=uniqueFirstRunNumbers.end();
         ++iFirst) {
      uniqueRunRanges.push_back(std::pair<RunNumber,RunNumber>((*iFirst).first, endValue));
    }
    for (unsigned int i = 0;i<uniqueRunRanges.size()-1;++i) {
      uniqueRunRanges[i].second = uniqueRunRanges[i+1].first - 1;
    }
    
  } else {
        
    uniqueRunRanges.push_back(std::pair<RunNumber,RunNumber>(beginValue, endValue));
    
  }
  
  return uniqueRunRanges;
}

boost::shared_ptr< CSCGeometry > AlignmentProducer::produceCSC ( const MuonGeometryRecord & iRecord ) [virtual]

Produce the muon CSC geometry.

Definition at line 171 of file AlignmentProducer.cc.

References theMuonCSC.

Referenced by AlignmentProducer().

{
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::produceCSC";
  return theMuonCSC;  
}

boost::shared_ptr< DTGeometry > AlignmentProducer::produceDT ( const MuonGeometryRecord & iRecord ) [virtual]

Produce the muon DT geometry.

Definition at line 162 of file AlignmentProducer.cc.

References theMuonDT.

Referenced by AlignmentProducer().

{
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::produceDT";
  return theMuonDT;
}

boost::shared_ptr< TrackerGeometry > AlignmentProducer::produceTracker ( const TrackerDigiGeometryRecord & iRecord ) [virtual]

Produce the tracker geometry.

Definition at line 153 of file AlignmentProducer.cc.

References theTracker.

Referenced by AlignmentProducer().

{
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::produceTracker";
  return theTracker;
}

void AlignmentProducer::readInSurveyRcds ( const edm::EventSetup & iSetup ) [private]

read in survey records

Definition at line 655 of file AlignmentProducer.cc.

References addSurveyInfo_(), edm::ESWatcher< T >::check(), AlignableMuon::CSCEndcaps(), doMuon_, doTracker_, AlignableMuon::DTBarrel(), edm::EventSetup::get(), theAlignableMuon, theAlignableTracker, theSurveyErrors, theSurveyIndex, theSurveyValues, useSurvey_, watchTkSurveyErrRcd_, and watchTkSurveyRcd_.

Referenced by duringLoop().

                                                                     {
        
  // Get Survey Rcds and add Survey Info
  if ( doTracker_ && useSurvey_ ){
    bool tkSurveyBool = watchTkSurveyRcd_.check(iSetup);
    bool tkSurveyErrBool = watchTkSurveyErrRcd_.check(iSetup);
    edm::LogInfo("Alignment") << "watcher tksurveyrcd: " << tkSurveyBool;
    edm::LogInfo("Alignment") << "watcher tksurveyerrrcd: " << tkSurveyErrBool;
    if ( tkSurveyBool || tkSurveyErrBool){
      
      edm::LogInfo("Alignment") << "ADDING THE SURVEY INFORMATION";
      edm::ESHandle<Alignments> surveys;
      edm::ESHandle<SurveyErrors> surveyErrors;
      
      iSetup.get<TrackerSurveyRcd>().get(surveys);
      iSetup.get<TrackerSurveyErrorRcd>().get(surveyErrors);
      
      theSurveyIndex  = 0;
      theSurveyValues = &*surveys;
      theSurveyErrors = &*surveyErrors;
      addSurveyInfo_(theAlignableTracker);
    }
  }
  
  if ( doMuon_ && useSurvey_) {
    bool DTSurveyBool = watchTkSurveyRcd_.check(iSetup);
    bool DTSurveyErrBool = watchTkSurveyErrRcd_.check(iSetup);
    bool CSCSurveyBool = watchTkSurveyRcd_.check(iSetup);
    bool CSCSurveyErrBool = watchTkSurveyErrRcd_.check(iSetup);
    
    if ( DTSurveyBool || DTSurveyErrBool || CSCSurveyBool || CSCSurveyErrBool ){
      edm::ESHandle<Alignments> dtSurveys;
      edm::ESHandle<SurveyErrors> dtSurveyErrors;
      edm::ESHandle<Alignments> cscSurveys;
      edm::ESHandle<SurveyErrors> cscSurveyErrors;
      
      iSetup.get<DTSurveyRcd>().get(dtSurveys);
      iSetup.get<DTSurveyErrorRcd>().get(dtSurveyErrors);
      iSetup.get<CSCSurveyRcd>().get(cscSurveys);
      iSetup.get<CSCSurveyErrorRcd>().get(cscSurveyErrors);
      
      theSurveyIndex  = 0;
      theSurveyValues = &*dtSurveys;
      theSurveyErrors = &*dtSurveyErrors;
      std::vector<Alignable*> barrels = theAlignableMuon->DTBarrel();
      for (std::vector<Alignable*>::const_iterator iter = barrels.begin();  iter != barrels.end();  ++iter) {
        addSurveyInfo_(*iter);
      }
      
      theSurveyIndex  = 0;
      theSurveyValues = &*cscSurveys;
      theSurveyErrors = &*cscSurveyErrors;
      std::vector<Alignable*> endcaps = theAlignableMuon->CSCEndcaps();
      for (std::vector<Alignable*>::const_iterator iter = endcaps.begin();  iter != endcaps.end();  ++iter) {
        addSurveyInfo_(*iter);
      }
    }
  }

}

void AlignmentProducer::simpleMisalignment_	(	const Alignables &	alivec,
		const std::string &	selection,
		float	shift,
		float	rot,
		bool	local
	)		`[private]`

Apply random shifts and rotations to selected alignables, according to configuration.

Definition at line 529 of file AlignmentProducer.cc.

References abs, Alignable::alignmentParameters(), AlignmentParameterSelector::convertParamSel(), RigidBodyAlignmentParameters::dalpha, RigidBodyAlignmentParameters::dbeta, RigidBodyAlignmentParameters::dgamma, RigidBodyAlignmentParameters::dx, RigidBodyAlignmentParameters::dy, RigidBodyAlignmentParameters::dz, Exception, Alignable::move(), RigidBodyAlignmentParameters::N_PARAM, convertSQLitetoXML_cfg::output, alignCSCRings::r, random, Alignable::rotateInGlobalFrame(), Alignable::rotateInLocalFrame(), indexGen::s2, AlignmentParameters::selector(), Alignable::surface(), AlignableSurface::toGlobal(), and align::toMatrix().

Referenced by beginOfJob().

{

  std::ostringstream output; // collecting output

  if (shift > 0. || rot > 0.) {
    output << "Adding random flat shift of max size " << shift
           << " and adding random flat rotation of max size " << rot <<" to ";

    std::vector<bool> commSel(0);
    if (selection != "-1") {
      AlignmentParameterSelector aSelector(0,0); // no alignable needed here...
      const std::vector<char> cSel(aSelector.convertParamSel(selection));
      if (cSel.size() < RigidBodyAlignmentParameters::N_PARAM) {
        throw cms::Exception("BadConfig") 
          << "[AlignmentProducer::simpleMisalignment_]\n"
          << "Expect selection string '" << selection << "' to be at least of length " 
          << RigidBodyAlignmentParameters::N_PARAM << " or to be '-1'.\n"
          << "(Most probably you have to adjust the parameter 'parameterSelectorSimple'.)";
      }
      for (std::vector<char>::const_iterator cIter = cSel.begin(); cIter != cSel.end(); ++cIter) {
        commSel.push_back(*cIter == '0' ? false : true);
      }
      output << "parameters defined by (" << selection 
             << "), representing (x,y,z,alpha,beta,gamma),";
    } else {
      output << "the active parameters of each alignable,";
    }
    output << " in " << (local ? "local" : "global") << " frame.";

    for (std::vector<Alignable*>::const_iterator it = alivec.begin(); it != alivec.end(); ++it) {
      Alignable* ali=(*it);
      std::vector<bool> mysel(commSel.empty() ? ali->alignmentParameters()->selector() : commSel);
      
      if (std::abs(shift)>0.00001) {
        double s0 = 0., s1 = 0., s2 = 0.;
        if (mysel[RigidBodyAlignmentParameters::dx]) s0 = shift * double(random()%1000-500)/500.;
        if (mysel[RigidBodyAlignmentParameters::dy]) s1 = shift * double(random()%1000-500)/500.;
        if (mysel[RigidBodyAlignmentParameters::dz]) s2 = shift * double(random()%1000-500)/500.;
        
        if (local) ali->move( ali->surface().toGlobal(align::LocalVector(s0,s1,s2)) );
        else       ali->move( align::GlobalVector(s0,s1,s2) );

      //AlignmentPositionError ape(dx,dy,dz);
      //ali->addAlignmentPositionError(ape);
      }

      if (std::abs(rot)>0.00001) {
        align::EulerAngles r(3);
        if (mysel[RigidBodyAlignmentParameters::dalpha]) r(1)=rot*double(random()%1000-500)/500.;
        if (mysel[RigidBodyAlignmentParameters::dbeta])  r(2)=rot*double(random()%1000-500)/500.;
        if (mysel[RigidBodyAlignmentParameters::dgamma]) r(3)=rot*double(random()%1000-500)/500.;

        const align::RotationType mrot = align::toMatrix(r);
        if (local) ali->rotateInLocalFrame(mrot);
        else       ali->rotateInGlobalFrame(mrot);
        
      //ali->addAlignmentPositionErrorFromRotation(mrot);
      }
    } // end loop on alignables
  } else {
    output << "No simple misalignment added!";
  }
  edm::LogInfo("Alignment")  << "@SUB=AlignmentProducer::simpleMisalignment_" << output.str();
}

void AlignmentProducer::startingNewLoop ( unsigned int iLoop ) [virtual]

Called at beginning of loop.

Implements edm::EDLooperBase.

Definition at line 354 of file AlignmentProducer.cc.

References AlignableTracker::alignmentErrors(), AlignableTracker::alignments(), GeometryAligner::applyAlignments(), GeometryAligner::attachSurfaceDeformations(), AlignableMuon::cscAlignmentErrors(), AlignableMuon::cscAlignments(), doMuon_, doTracker_, AlignableMuon::dtAlignmentErrors(), AlignableMuon::dtAlignments(), nevent_, AlignmentAlgorithmBase::startNewLoop(), Alignable::surfaceDeformations(), theAlignableMuon, theAlignableTracker, theAlignmentAlgo, and theMonitors.

{
  edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::startingNewLoop" 
                            << "Starting loop number " << iLoop;

  nevent_ = 0;

  theAlignmentAlgo->startNewLoop();

  for (std::vector<AlignmentMonitorBase*>::const_iterator monitor = theMonitors.begin();  monitor != theMonitors.end();  ++monitor) {
     (*monitor)->startingNewLoop();
  }

  edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::startingNewLoop" 
                            << "Now physically apply alignments to  geometry...";


  // Propagate changes to reconstruction geometry (from initialisation or iteration)
  GeometryAligner aligner;
  if ( doTracker_ ) {
    std::auto_ptr<Alignments> alignments(theAlignableTracker->alignments());
    std::auto_ptr<AlignmentErrors> alignmentErrors(theAlignableTracker->alignmentErrors());
    aligner.applyAlignments<TrackerGeometry>( &(*theTracker),&(*alignments),&(*alignmentErrors), AlignTransform() ); // don't apply global a second time!
    std::auto_ptr<AlignmentSurfaceDeformations> aliDeforms(theAlignableTracker->surfaceDeformations());
    aligner.attachSurfaceDeformations<TrackerGeometry>(&(*theTracker), &(*aliDeforms));

  }
  if ( doMuon_ ) {
    std::auto_ptr<Alignments>      dtAlignments(       theAlignableMuon->dtAlignments());
    std::auto_ptr<AlignmentErrors> dtAlignmentErrors(  theAlignableMuon->dtAlignmentErrors());
    std::auto_ptr<Alignments>      cscAlignments(      theAlignableMuon->cscAlignments());
    std::auto_ptr<AlignmentErrors> cscAlignmentErrors( theAlignableMuon->cscAlignmentErrors());

    aligner.applyAlignments<DTGeometry>( &(*theMuonDT), &(*dtAlignments), &(*dtAlignmentErrors), AlignTransform() ); // don't apply global a second time!
    aligner.applyAlignments<CSCGeometry>( &(*theMuonCSC), &(*cscAlignments), &(*cscAlignmentErrors), AlignTransform() ); // nope!
  }
}

void AlignmentProducer::writeDB	(	AlignmentSurfaceDeformations *	alignmentSurfaceDeformations,
		const std::string &	surfaceDeformationRcd,
		cond::Time_t	time
	)		const `[private]`

Write surface deformations (bows & kinks) to DB for given record name Takes over ownership of alignmentsurfaceDeformations.

Definition at line 890 of file AlignmentProducer.cc.

References Exception, edm::Service< T >::isAvailable(), saveDeformationsToDB_, and cond::rpcobgas::time.

{
  // Call service
  edm::Service<cond::service::PoolDBOutputService> poolDb;
  if (!poolDb.isAvailable()) { // Die if not available
    delete alignmentSurfaceDeformations; // promised to take over ownership...
    throw cms::Exception("NotAvailable") << "PoolDBOutputService not available";
  }
  
  if (saveDeformationsToDB_) {
    edm::LogInfo("Alignment") << "Writing AlignmentSurfaceDeformations to "
                              << surfaceDeformationRcd  << ".";
    poolDb->writeOne<AlignmentSurfaceDeformations>(alignmentSurfaceDeformations, time,
                                                   surfaceDeformationRcd);
  } else { // poolDb->writeOne(..) takes over 'surfaceDeformation' ownership,...
    delete alignmentSurfaceDeformations; // ...otherwise we have to delete, as promised!
  }
}

void AlignmentProducer::writeDB	(	Alignments *	alignments,
		const std::string &	alignRcd,
		AlignmentErrors *	alignmentErrors,
		const std::string &	errRcd,
		const AlignTransform *	globalCoordinates,
		cond::Time_t	time
	)		const `[private]`

Write alignment and/or errors to DB for record names (removes *globalCoordinates before writing if non-null...). Takes over ownership of alignments and alignmentErrrors.

Definition at line 836 of file AlignmentProducer.cc.

References Exception, edm::Service< T >::isAvailable(), GeometryAligner::removeGlobalTransform(), saveApeToDB_, saveToDB_, cond::rpcobgas::time, and AlignTransform::transform().

Referenced by writeForRunRange().

{
  Alignments * tempAlignments = alignments;
  AlignmentErrors * tempAlignmentErrors = alignmentErrors;

  // Call service
  edm::Service<cond::service::PoolDBOutputService> poolDb;
  if (!poolDb.isAvailable()) { // Die if not available
    delete tempAlignments;      // promised to take over ownership...
    delete tempAlignmentErrors; // dito
    throw cms::Exception("NotAvailable") << "PoolDBOutputService not available";
  }

  if (globalCoordinates  // happens only if (applyDbAlignment_ == true)
      && globalCoordinates->transform() != AlignTransform::Transform::Identity) {

    tempAlignments = new Alignments();            // temporary storage for
    tempAlignmentErrors = new AlignmentErrors();  // final alignments and errors

    GeometryAligner aligner;
    aligner.removeGlobalTransform(alignments, alignmentErrors,
                                  *globalCoordinates,
                                  tempAlignments, tempAlignmentErrors);
    
    delete alignments;       // have to delete original alignments
    delete alignmentErrors;  // same thing for the errors

    edm::LogInfo("Alignment") << "@SUB=AlignmentProducer::writeDB"
                              << "globalCoordinates removed from alignments (" << alignRcd
                              << ") and errors (" << alignRcd << ").";
  }
  
  if (saveToDB_) {
    edm::LogInfo("Alignment") << "Writing Alignments to " << alignRcd << ".";
    poolDb->writeOne<Alignments>(tempAlignments, time, alignRcd);
  } else { // poolDb->writeOne(..) takes over 'alignments' ownership,...
    delete tempAlignments; // ...otherwise we have to delete, as promised!
  }

  if (saveApeToDB_) {
    edm::LogInfo("Alignment") << "Writing AlignmentErrors to " << errRcd << ".";
    poolDb->writeOne<AlignmentErrors>(tempAlignmentErrors, time, errRcd);
  } else { // poolDb->writeOne(..) takes over 'alignmentErrors' ownership,...
    delete tempAlignmentErrors; // ...otherwise we have to delete, as promised!
  }
}

void AlignmentProducer::writeForRunRange ( cond::Time_t time ) [private]

Definition at line 791 of file AlignmentProducer.cc.

References AlignableTracker::alignmentErrors(), AlignableTracker::alignments(), AlignableMuon::cscAlignmentErrors(), AlignableMuon::cscAlignments(), align::DetectorGlobalPosition(), doMuon_, doTracker_, AlignableMuon::dtAlignmentErrors(), AlignableMuon::dtAlignments(), globalPositions_, DetId::Muon, saveDeformationsToDB_, Alignable::surfaceDeformations(), theAlignableMuon, theAlignableTracker, DetId::Tracker, and writeDB().

Referenced by endOfJob().

{
  if ( doTracker_ ) { // first tracker
    const AlignTransform *trackerGlobal = 0; // will be 'removed' from constants 
    if (globalPositions_) { // i.e. applied before in applyDB
      trackerGlobal = &align::DetectorGlobalPosition(*globalPositions_,
                                                     DetId(DetId::Tracker));
    }
        
    Alignments *alignments = theAlignableTracker->alignments();
    AlignmentErrors *alignmentErrors = theAlignableTracker->alignmentErrors();
    this->writeDB(alignments, "TrackerAlignmentRcd",
                  alignmentErrors, "TrackerAlignmentErrorRcd", trackerGlobal,
                  time);        
  }
      
  if ( doMuon_ ) { // now muon
    const AlignTransform *muonGlobal = 0; // will be 'removed' from constants 
    if (globalPositions_) { // i.e. applied before in applyDB
      muonGlobal = &align::DetectorGlobalPosition(*globalPositions_,
                                                  DetId(DetId::Muon));
    }
    // Get alignments+errors, first DT - ownership taken over by writeDB(..), so no delete
    Alignments      *alignments       = theAlignableMuon->dtAlignments();
    AlignmentErrors *alignmentErrors  = theAlignableMuon->dtAlignmentErrors();
    this->writeDB(alignments, "DTAlignmentRcd",
                  alignmentErrors, "DTAlignmentErrorRcd", muonGlobal,
                  time);
    
    // Get alignments+errors, now CSC - ownership taken over by writeDB(..), so no delete
    alignments       = theAlignableMuon->cscAlignments();
    alignmentErrors  = theAlignableMuon->cscAlignmentErrors();
    this->writeDB(alignments, "CSCAlignmentRcd",
                  alignmentErrors, "CSCAlignmentErrorRcd", muonGlobal,
                  time);
  }
      
  // Save surface deformations to database
  if (saveDeformationsToDB_ && doTracker_) {
    AlignmentSurfaceDeformations *alignmentSurfaceDeformations = theAlignableTracker->surfaceDeformations();
    this->writeDB(alignmentSurfaceDeformations, "TrackerSurfaceDeformationRcd", time);
  }
}