#include <HCalSD.h>

Inheritance diagram for HCalSD:

Public Member Functions
virtual double	getEnergyDeposit (G4Step *)
	HCalSD (G4String, const DDCompactView &, SensitiveDetectorCatalog &, edm::ParameterSet const &, const SimTrackManager *)
virtual bool	ProcessHits (G4Step , G4TouchableHistory )
virtual uint32_t	setDetUnitId (G4Step *step)
void	setNumberingScheme (HcalNumberingScheme *)
virtual	~HCalSD ()
Protected Member Functions
virtual bool	filterHit (CaloG4Hit *, double)
virtual void	initRun ()
Private Member Functions
std::vector< double >	getDDDArray (const std::string &, const DDsvalues_type &)
void	getFromLibrary (G4Step *step)
void	getFromParam (G4Step *step)
void	getHitFibreBundle (G4Step *step, bool type)
void	getHitPMT (G4Step *step)
std::vector< G4String >	getNames (DDFilteredView &)
void	hitForFibre (G4Step *step)
bool	isItConicalBundle (G4LogicalVolume *)
bool	isItFibre (G4LogicalVolume *)
bool	isItFibre (G4String)
bool	isItHF (G4Step *)
bool	isItHF (G4String)
bool	isItPMT (G4LogicalVolume *)
bool	isItScintillator (G4Material *)
bool	isItStraightBundle (G4LogicalVolume *)
double	layerWeight (int, G4ThreeVector, int, int)
void	plotProfile (G4Step *step, G4ThreeVector pos, double edep, double time, int id)
void	readWeightFromFile (std::string)
uint32_t	setDetUnitId (int, G4ThreeVector, int, int)
int	setTrackID (G4Step *step)
Private Attributes
bool	applyFidCut
double	betaThr
double	birk1
double	birk2
double	birk3
TH1F *	dist_ [9]
double	eminHitHB
double	eminHitHE
double	eminHitHF
double	eminHitHO
std::vector< G4LogicalVolume * >	fibre1LV
std::vector< G4LogicalVolume * >	fibre2LV
std::vector< G4LogicalVolume * >	fibreLV
std::vector< G4String >	fibreNames
std::vector< int >	hfLevels
std::vector< G4LogicalVolume * >	hfLV
std::vector< G4String >	hfNames
HFShower *	hfshower
TH1F *	hit_ [9]
std::vector< double >	layer0wt
std::map< uint32_t, double >	layerWeights
std::vector< G4Material * >	materials
std::vector< G4String >	matNames
G4int	mumPDG
G4int	mupPDG
HcalNumberingFromDDD *	numberingFromDDD
HcalNumberingScheme *	numberingScheme
std::vector< G4LogicalVolume * >	pmtLV
HFShowerFibreBundle *	showerBundle
HFShowerLibrary *	showerLibrary
HFShowerParam *	showerParam
HFShowerPMT *	showerPMT
TH1F *	time_ [9]
bool	useBirk
bool	useFibreBundle
bool	useHF
bool	useLayerWt
bool	useParam
bool	usePMTHit
bool	useShowerLibrary

Detailed Description

Definition at line 31 of file HCalSD.h.

Constructor & Destructor Documentation

HCalSD::HCalSD	(	G4String	name,
		const DDCompactView &	cpv,
		SensitiveDetectorCatalog &	clg,
		edm::ParameterSet const &	p,
		const SimTrackManager *	manager
	)

Definition at line 32 of file HCalSD.cc.

References DDFilteredView::addFilter(), betaThr, birk1, birk2, birk3, dist_, eminHitHB, eminHitHE, eminHitHF, eminHitHO, DDSpecificsFilter::equals, fibre1LV, fibre2LV, fibreLV, fibreNames, mergeVDriftHistosByStation::file, DDFilteredView::firstChild(), g, getDDDArray(), SensitiveDetector::getNames(), edm::ParameterSet::getParameter(), edm::ParameterSet::getUntrackedParameter(), hfLevels, hfLV, hfNames, hfshower, hit_, i, edm::Service< T >::isAvailable(), isItFibre(), isItHF(), CaloSD::kmaxIon, CaloSD::kmaxNeutron, CaloSD::kmaxProton, reco_calib_source_client_cfg::labels, layer0wt, testEve_cfg::level, funct::log(), LogDebug, DDFilteredView::logicalPart(), DDLogicalPart::material(), materials, matNames, DDFilteredView::mergedSpecifics(), mumPDG, mupPDG, SensitiveDetector::name, DDName::name(), DDBase< N, C >::name(), DDFilteredView::next(), numberingFromDDD, pmtLV, readWeightFromFile(), DDSpecificsFilter::setCriteria(), setNumberingScheme(), showerBundle, showerLibrary, showerParam, showerPMT, CaloSD::suppressHeavy, groupFilesInBlocks::temp, time_, indexGen::title, useBirk, useFibreBundle, useHF, useLayerWt, useParam, usePMTHit, useShowerLibrary, and relativeConstraints::value.

                                                                          : 
         CaloSD(name, cpv, clg, p, manager,
         p.getParameter<edm::ParameterSet>("HCalSD").getParameter<int>("TimeSliceUnit"),
         p.getParameter<edm::ParameterSet>("HCalSD").getParameter<bool>("IgnoreTrackID")), 
         numberingFromDDD(0), numberingScheme(0), showerLibrary(0), hfshower(0), 
         showerParam(0), showerPMT(0), showerBundle(0) {

  //static SimpleConfigurable<bool>   on1(false, "HCalSD:UseBirkLaw");
  //static SimpleConfigurable<double> bk1(0.013, "HCalSD:BirkC1");
  //static SimpleConfigurable<double> bk2(0.0568,"HCalSD:BirkC2");
  //static SimpleConfigurable<double> bk3(1.75,  "HCalSD:BirkC3");
  // Values from NIM 80 (1970) 239-244: as implemented in Geant3
  //static SimpleConfigurable<bool> on2(true,"HCalSD:UseShowerLibrary");
  edm::ParameterSet m_HC = p.getParameter<edm::ParameterSet>("HCalSD");
  useBirk          = m_HC.getParameter<bool>("UseBirkLaw");
  birk1            = m_HC.getParameter<double>("BirkC1")*(g/(MeV*cm2));
  birk2            = m_HC.getParameter<double>("BirkC2");
  birk3            = m_HC.getParameter<double>("BirkC3");
  useShowerLibrary = m_HC.getParameter<bool>("UseShowerLibrary");
  useParam         = m_HC.getParameter<bool>("UseParametrize");
  bool testNumber  = m_HC.getParameter<bool>("TestNumberingScheme");
  usePMTHit        = m_HC.getParameter<bool>("UsePMTHits");
  betaThr          = m_HC.getParameter<double>("BetaThreshold");
  eminHitHB        = m_HC.getParameter<double>("EminHitHB")*MeV;
  eminHitHE        = m_HC.getParameter<double>("EminHitHE")*MeV;
  eminHitHO        = m_HC.getParameter<double>("EminHitHO")*MeV;
  eminHitHF        = m_HC.getParameter<double>("EminHitHF")*MeV;
  useFibreBundle   = m_HC.getParameter<bool>("UseFibreBundleHits");
  useHF            = m_HC.getUntrackedParameter<bool>("UseHF",true);
  bool forTBH2     = m_HC.getUntrackedParameter<bool>("ForTBH2",false);
  useLayerWt       = m_HC.getUntrackedParameter<bool>("UseLayerWt",false);
  std::string file = m_HC.getUntrackedParameter<std::string>("WtFile","None");

#ifdef DebugLog
  LogDebug("HcalSim") << "***************************************************" 
                      << "\n"
                      << "*                                                 *"
                      << "\n"
                      << "* Constructing a HCalSD  with name " << name << "\n"
                      << "*                                                 *"
                      << "\n"
                      << "***************************************************";
#endif
  edm::LogInfo("HcalSim") << "HCalSD:: Use of HF code is set to " << useHF
                          << "\nUse of shower parametrization set to "
                          << useParam << "\nUse of shower library is set to " 
                          << useShowerLibrary << "\nUse PMT Hit is set to "
                          << usePMTHit << " with beta Threshold "<< betaThr
                          << "\nUSe of FibreBundle Hit set to "<<useFibreBundle
                          << "\n         Use of Birks law is set to      " 
                          << useBirk << "  with three constants kB = "
                          << birk1 << ", C1 = " << birk2 << ", C2 = " << birk3;
  edm::LogInfo("HcalSim") << "HCalSD:: Suppression Flag " << suppressHeavy
                          << " protons below " << kmaxProton << " MeV,"
                          << " neutrons below " << kmaxNeutron << " MeV and"
                          << " ions below " << kmaxIon << " MeV\n"
                          << "         Threshold for storing hits in HB: "
                          << eminHitHB << " HE: " << eminHitHE << " HO: "
                          << eminHitHO << " HF: " << eminHitHF;

  numberingFromDDD = new HcalNumberingFromDDD(name, cpv);
  HcalNumberingScheme* scheme;
  if (testNumber || forTBH2) 
    scheme = dynamic_cast<HcalNumberingScheme*>(new HcalTestNumberingScheme(forTBH2));
  else 
    scheme = new HcalNumberingScheme();
  setNumberingScheme(scheme);

  const G4LogicalVolumeStore * lvs = G4LogicalVolumeStore::GetInstance();
  std::vector<G4LogicalVolume *>::const_iterator lvcite;
  G4LogicalVolume* lv;
  std::string attribute, value;
  if (useHF) {
    if (useParam) {
      showerParam = new HFShowerParam(name, cpv, p);
    }  else {
      if (useShowerLibrary) showerLibrary = new HFShowerLibrary(name, cpv, p);
      hfshower  = new HFShower(name, cpv, p, 0);
    }

    // HF volume names
    attribute = "Volume";
    value     = "HF";
    DDSpecificsFilter filter0;
    DDValue           ddv0(attribute, value, 0);
    filter0.setCriteria(ddv0, DDSpecificsFilter::equals);
    DDFilteredView fv0(cpv);
    fv0.addFilter(filter0);
    hfNames = getNames(fv0);
    fv0.firstChild();
    DDsvalues_type sv0(fv0.mergedSpecifics());
    std::vector<double> temp =  getDDDArray("Levels",sv0);
    edm::LogInfo("HcalSim") << "HCalSD: Names to be tested for " << attribute 
                            << " = " << value << " has " << hfNames.size() << " elements";
    for (unsigned int i=0; i < hfNames.size(); ++i) {
      G4String namv = hfNames[i];
      lv            = 0;
      for(lvcite=lvs->begin(); lvcite!=lvs->end(); lvcite++) 
        if((*lvcite)->GetName()==namv) {
          lv = (*lvcite);
          break;
        }
      hfLV.push_back(lv);
      int level = static_cast<int>(temp[i]);
      hfLevels.push_back(level);
      edm::LogInfo("HcalSim") << "HCalSD:  HF[" << i << "] = " << hfNames[i]
                              << " LV " << hfLV[i] << " at level " 
                              << hfLevels[i];
    }
  
    // HF Fibre volume names
    value     = "HFFibre";
    DDSpecificsFilter filter1;
    DDValue           ddv1(attribute,value,0);
    filter1.setCriteria(ddv1, DDSpecificsFilter::equals);
    DDFilteredView fv1(cpv);
    fv1.addFilter(filter1);
    fibreNames = getNames(fv1);
    edm::LogInfo("HcalSim") << "HCalSD: Names to be tested for " << attribute 
                            << " = " << value << ":";
    for (unsigned int i=0; i<fibreNames.size(); ++i) {
      G4String namv = fibreNames[i];
      lv            = 0;
      for (lvcite = lvs->begin(); lvcite != lvs->end(); ++lvcite) {
        if ((*lvcite)->GetName() == namv) {
          lv = (*lvcite);
          break;
        }
      }
      fibreLV.push_back(lv);
      edm::LogInfo("HcalSim") << "HCalSD:  (" << i << ") " << fibreNames[i]
                              << " LV " << fibreLV[i];
    }
  
    // HF PMT volume names
    value     = "HFPMT";
    DDSpecificsFilter filter3;
    DDValue           ddv3(attribute,value,0);
    filter3.setCriteria(ddv3,DDSpecificsFilter::equals);
    DDFilteredView fv3(cpv);
    fv3.addFilter(filter3);
    std::vector<G4String> pmtNames = getNames(fv3);
    edm::LogInfo("HcalSim") << "HCalSD: Names to be tested for " << attribute << " = "
                            << value << " have " << pmtNames.size() << " entries";
    for (unsigned int i=0; i<pmtNames.size(); ++i)  {
      G4String namv = pmtNames[i];
      lv            = 0;
      for (lvcite = lvs->begin(); lvcite != lvs->end(); ++lvcite) 
        if ((*lvcite)->GetName() == namv) {
          lv = (*lvcite);
          break;
        }
      pmtLV.push_back(lv);
      edm::LogInfo("HcalSim") << "HCalSD:  (" << i << ") " << pmtNames[i]
                              << " LV " << pmtLV[i];
    }
    if (pmtNames.size() > 0) showerPMT = new HFShowerPMT (name, cpv, p);
  
    // HF Fibre bundles
    value     = "HFFibreBundleStraight";
    DDSpecificsFilter filter4;
    DDValue           ddv4(attribute,value,0);
    filter4.setCriteria(ddv4,DDSpecificsFilter::equals);
    DDFilteredView fv4(cpv);
    fv4.addFilter(filter4);
    std::vector<G4String> fibreNames = getNames(fv4);
    edm::LogInfo("HcalSim") << "HCalSD: Names to be tested for " << attribute
                            << " = " << value << " have " << fibreNames.size()
                            << " entries";
    for (unsigned int i=0; i<fibreNames.size(); ++i) {
      G4String namv = fibreNames[i];
      lv            = 0;
      for (lvcite = lvs->begin(); lvcite != lvs->end(); lvcite++) 
        if ((*lvcite)->GetName() == namv) {
          lv = (*lvcite);
          break;
        }
      fibre1LV.push_back(lv);
      edm::LogInfo("HcalSim") << "HCalSD:  (" << i << ") " << fibreNames[i]
                              << " LV " << fibre1LV[i];
    }

    value     = "HFFibreBundleConical";
    DDSpecificsFilter filter5;
    DDValue           ddv5(attribute,value,0);
    filter5.setCriteria(ddv5,DDSpecificsFilter::equals);
    DDFilteredView fv5(cpv);
    fv5.addFilter(filter5);
    fibreNames = getNames(fv5);
    edm::LogInfo("HcalSim") << "HCalSD: Names to be tested for " << attribute << " = "
                            << value << " have " << fibreNames.size() << " entries";
    for (unsigned int i=0; i<fibreNames.size(); ++i) {
      G4String namv = fibreNames[i];
      lv            = 0;
      for (lvcite = lvs->begin(); lvcite != lvs->end(); ++lvcite) 
        if ((*lvcite)->GetName() == namv) {
          lv = (*lvcite);
          break;
        }
      fibre2LV.push_back(lv);
      edm::LogInfo("HcalSim") << "HCalSD:  (" << i << ") " << fibreNames[i]
                              << " LV " << fibre2LV[i];
    }
    if (fibre1LV.size() > 0 || fibre2LV.size() > 0) 
      showerBundle = new HFShowerFibreBundle (name, cpv, p);
  }

  //Material list for HB/HE/HO sensitive detectors
  attribute = "ReadOutName";
  DDSpecificsFilter filter2;
  DDValue           ddv2(attribute,name,0);
  filter2.setCriteria(ddv2,DDSpecificsFilter::equals);
  DDFilteredView fv2(cpv);
  fv2.addFilter(filter2);
  bool dodet = fv2.firstChild();

  DDsvalues_type sv(fv2.mergedSpecifics());
  //Layer0 Weight
  layer0wt = getDDDArray("Layer0Wt",sv);
  edm::LogInfo("HcalSim") << "HCalSD: " << layer0wt.size() << " Layer0Wt";
  for (unsigned int it=0; it<layer0wt.size(); ++it)
    edm::LogInfo("HcalSim") << "HCalSD: [" << it << "] " << layer0wt[it];

  const G4MaterialTable * matTab = G4Material::GetMaterialTable();
  std::vector<G4Material*>::const_iterator matite;
  while (dodet) {
    const DDLogicalPart & log = fv2.logicalPart();
    G4String namx = log.name().name();
    if (!isItHF(namx) && !isItFibre(namx)) {
      bool notIn = true;
      for (unsigned int i=0; i<matNames.size(); ++i) {
        if (!strcmp(matNames[i].c_str(),log.material().name().name().c_str())){
          notIn = false;
          break;
        }
      }
      if (notIn) {
        namx = log.material().name().name();
        matNames.push_back(namx);
        G4Material* mat;
        for (matite = matTab->begin(); matite != matTab->end(); ++matite) {
          if ((*matite)->GetName() == namx) {
            mat = (*matite);
            break;
          }
        }
        materials.push_back(mat);
      }
    }
    dodet = fv2.next();
  }

  edm::LogInfo("HcalSim") << "HCalSD: Material names for " << attribute 
                          << " = " << name << ":";
  for (unsigned int i=0; i<matNames.size(); ++i)
    edm::LogInfo("HcalSim") << "HCalSD: (" << i << ") " << matNames[i]
                            << " pointer " << materials[i];

  mumPDG = mupPDG = 0;
  
  if (useLayerWt) readWeightFromFile(file);

  for (int i=0;  i<9; ++i) hit_[i] = time_[i]= dist_[i] = 0;

#ifdef DebugLog
  edm::Service<TFileService> tfile;

  if ( tfile.isAvailable() ) {
    static std::string labels[9] = {"HB", "HE", "HO", "HF Absorber", "HF PMT",
                                    "HF Absorber Long", "HF Absorber Short",
                                    "HF PMT Long", "HF PMT Short"};
    char name[20], title[60];
    for (int i=0; i<9; ++i) {
      sprintf (title, "Hit energy in %s", labels[i].c_str());
      sprintf (name, "HCalSDHit%d", i);
      hit_[i] = tfile->make<TH1F>(name, title, 2000, 0., 2000.);
      sprintf (title, "Energy (MeV)");
      hit_[i]->GetXaxis()->SetTitle(title);
      hit_[i]->GetYaxis()->SetTitle("Hits");
      sprintf (title, "Time of the hit in %s", labels[i].c_str());
      sprintf (name, "HCalSDTime%d", i);
      time_[i] = tfile->make<TH1F>(name, title, 2000, 0., 2000.);
      sprintf (title, "Time (ns)");
      time_[i]->GetXaxis()->SetTitle(title);
      time_[i]->GetYaxis()->SetTitle("Hits");
      sprintf (title, "Longitudinal profile in %s", labels[i].c_str());
      sprintf (name, "HCalSDDist%d", i);
      dist_[i] = tfile->make<TH1F>(name, title, 2000, 0., 2000.);
      sprintf (title, "Distance (mm)");
      dist_[i]->GetXaxis()->SetTitle(title);
      dist_[i]->GetYaxis()->SetTitle("Hits");
    }
  }
#endif
}

HCalSD::~HCalSD ( ) [virtual]

Definition at line 330 of file HCalSD.cc.

References hfshower, numberingFromDDD, numberingScheme, showerBundle, showerLibrary, showerParam, and showerPMT.

                { 

  if (numberingFromDDD) delete numberingFromDDD;
  if (numberingScheme)  delete numberingScheme;
  if (showerLibrary)    delete showerLibrary;
  if (hfshower)         delete hfshower;
  if (showerParam)      delete showerParam;
  if (showerPMT)        delete showerPMT;
  if (showerBundle)     delete showerBundle;
}

Member Function Documentation

bool HCalSD::filterHit	(	CaloG4Hit *	aHit,
		double	time
	)		`[protected, virtual]`

Reimplemented from CaloSD.

Definition at line 506 of file HCalSD.cc.

References eminHitHB, eminHitHE, eminHitHF, eminHitHO, CaloG4Hit::getEnergyDeposit(), CaloG4Hit::getUnitID(), HcalBarrel, HcalEndcap, HcalForward, HcalOuter, dtDQMClient_cfg::threshold, and CaloSD::tmaxHit.

                                                   {
  double threshold=0;
  DetId theId(aHit->getUnitID());
  switch (theId.subdetId()) {
  case HcalBarrel:
    threshold = eminHitHB; break;
  case HcalEndcap:
    threshold = eminHitHE; break;
  case HcalOuter:
    threshold = eminHitHO; break;
  case HcalForward:
    threshold = eminHitHF; break;
  default:
    break;
  }
  return ((time <= tmaxHit) && (aHit->getEnergyDeposit() > threshold));
}

std::vector< double > HCalSD::getDDDArray	(	const std::string &	str,
		const DDsvalues_type &	sv
	)		`[private]`

Definition at line 536 of file HCalSD.cc.

References DDfetch(), DDValue::doubles(), Exception, LogDebug, and relativeConstraints::value.

Referenced by HCalSD().

                                                                   {
#ifdef DebugLog
  LogDebug("HcalSim") << "HCalSD:getDDDArray called for " << str;
#endif
  DDValue value(str);
  if (DDfetch(&sv,value)) {
#ifdef DebugLog
    LogDebug("HcalSim") << value;
#endif
    const std::vector<double> & fvec = value.doubles();
    int nval = fvec.size();
    if (nval < 1) {
      edm::LogError("HcalSim") << "HCalSD : # of " << str << " bins " << nval
          << " < 2 ==> illegal";
      throw cms::Exception("Unknown", "HCalSD") << "nval < 2 for array " << str << "\n";
    }
    
    return fvec;
  } else {
    edm::LogError("HcalSim") << "HCalSD :  cannot get array " << str;
    throw cms::Exception("Unknown", "HCalSD") << "cannot get array " << str << "\n";
  }
}

double HCalSD::getEnergyDeposit ( G4Step * aStep ) [virtual]

Reimplemented from CaloSD.

Definition at line 422 of file HCalSD.cc.

References birk1, birk2, birk3, CaloSD::getAttenuation(), CaloSD::getResponseWt(), isItScintillator(), TrackInformation::isPrimary(), ke, CaloSD::kmaxIon, CaloSD::kmaxNeutron, CaloSD::kmaxProton, layer0wt, layerWeight(), CaloSD::suppressHeavy, CaloSD::theTrack, useBirk, useLayerWt, and CommonMethods::weight().

                                             {
  double destep = aStep->GetTotalEnergyDeposit();
  double weight = 1;
  const G4VTouchable* touch = aStep->GetPreStepPoint()->GetTouchable();
  int depth = (touch->GetReplicaNumber(0))%10;
  int det   = ((touch->GetReplicaNumber(1))/1000)-3;
  if (depth==0 && (det==0 || det==1)) weight = layer0wt[det];
  if (useLayerWt) {
    int lay   = (touch->GetReplicaNumber(0)/10)%100 + 1;
    G4ThreeVector hitPoint = aStep->GetPreStepPoint()->GetPosition();
    weight = layerWeight(det+3, hitPoint, depth, lay);
  }

  if (suppressHeavy) {
    G4Track* theTrack = aStep->GetTrack();
    TrackInformation * trkInfo = (TrackInformation *)(theTrack->GetUserInformation());
    if (trkInfo) {
      int pdg = theTrack->GetDefinition()->GetPDGEncoding();
      if (!(trkInfo->isPrimary())) {         // Only secondary particles
        double ke = theTrack->GetKineticEnergy()/MeV;
        if ( pdg/1000000000 == 1 && (pdg/10000)%100 > 0 &&
                 (pdg/10)%100 > 0    && ke <kmaxIon         ) weight = 0;
        if ((pdg == 2212) && (ke < kmaxProton))     weight = 0;
        if ((pdg == 2112) && (ke < kmaxNeutron))    weight = 0;
#ifdef DebugLog
        if (weight == 0) 
          edm::LogInfo("HcalSim") << "HCalSD:Ignore Track " 
                                  << theTrack->GetTrackID() << " Type " 
                                  << theTrack->GetDefinition()->GetParticleName()
                                  << " Kinetic Energy " << ke << " MeV";
#endif
      }
    }
  }
#ifdef DebugLog
  double weight0 = weight;
#endif
  if (useBirk) {
    G4Material* mat = aStep->GetPreStepPoint()->GetMaterial();
    if (isItScintillator(mat)) weight *= getAttenuation(aStep, birk1, birk2, birk3);
  }
  double wt1    = getResponseWt(theTrack);
#ifdef DebugLog
  edm::LogInfo("HcalSim") << "HCalSD: Detector " << det+3 << " Depth " << depth
                          << " weight " << weight0 << " " << weight << " " << wt1; 
#endif
  return weight*wt1*destep;
}

void HCalSD::getFromLibrary ( G4Step * step ) [private]

Definition at line 635 of file HCalSD.cc.

References CaloSD::checkHit(), CaloSD::createNewHit(), CaloSD::currentHit, CaloSD::currentID, CaloSD::edepositEM, CaloSD::edepositHAD, CaloSD::emPDG, CaloSD::epPDG, CaloSD::gammaPDG, HFShowerLibrary::getHits(), GetVolume(), i, convertSQLiteXML::ok, plotProfile(), CaloSD::posGlobal, CaloSD::preStepPoint, CaloSD::previousID, CaloSD::resetForNewPrimary(), setDetUnitId(), CaloHitID::setID(), setTrackID(), showerLibrary, CaloSD::theTrack, cond::rpcobgas::time, and CaloSD::updateHit().

Referenced by ProcessHits().

                                          {
  preStepPoint  = aStep->GetPreStepPoint(); 
  theTrack      = aStep->GetTrack();   
  int det       = 5;
  bool ok;

  std::vector<HFShowerLibrary::Hit> hits = showerLibrary->getHits(aStep, ok);

  double etrack    = preStepPoint->GetKineticEnergy();
  int    primaryID = setTrackID(aStep);
  /*
  int    primaryID = 0;
  if (etrack >= energyCut) {
    primaryID    = theTrack->GetTrackID();
  } else {
    primaryID    = theTrack->GetParentID();
    if (primaryID == 0) primaryID = theTrack->GetTrackID();
  }
  */

  // Reset entry point for new primary
  posGlobal = preStepPoint->GetPosition();
  resetForNewPrimary(posGlobal, etrack);

  G4int particleCode = theTrack->GetDefinition()->GetPDGEncoding();
  if (particleCode==emPDG || particleCode==epPDG || particleCode==gammaPDG) {
    edepositEM  = 1.*GeV;
    edepositHAD = 0.;
  } else {
    edepositEM  = 0.;
    edepositHAD = 1.*GeV;
  }
#ifdef DebugLog
  edm::LogInfo("HcalSim") << "HCalSD::getFromLibrary " <<hits.size() 
                          << " hits for " << GetName() << " of " << primaryID 
                          << " with " << theTrack->GetDefinition()->GetParticleName() 
                          << " of " << preStepPoint->GetKineticEnergy()/GeV << " GeV";
#endif
  for (unsigned int i=0; i<hits.size(); ++i) {
    G4ThreeVector hitPoint = hits[i].position;
    int depth              = hits[i].depth;
    double time            = hits[i].time;
    unsigned int unitID    = setDetUnitId(det, hitPoint, depth);
    currentID.setID(unitID, time, primaryID, 0);
#ifdef DebugLog
    plotProfile(aStep, hitPoint, 1.0*GeV, time, depth);
#endif
   
    // check if it is in the same unit and timeslice as the previous one
    if (currentID == previousID) {
      updateHit(currentHit);
    } else {
      if (!checkHit()) currentHit = createNewHit();
    }
  }

  //Now kill the current track
  if (ok) {
    theTrack->SetTrackStatus(fStopAndKill);
    G4TrackVector tv = *(aStep->GetSecondary());
    for (unsigned int kk=0; kk<tv.size(); ++kk)
      if (tv[kk]->GetVolume() == preStepPoint->GetPhysicalVolume())
        tv[kk]->SetTrackStatus(fStopAndKill);
  }
}

void HCalSD::getFromParam ( G4Step * step ) [private]

Definition at line 748 of file HCalSD.cc.

References CaloSD::checkHit(), CaloSD::createNewHit(), CaloSD::currentHit, CaloSD::currentID, CaloSD::edepositEM, CaloSD::edepositHAD, HFShowerParam::getHits(), i, plotProfile(), CaloSD::posGlobal, CaloSD::preStepPoint, CaloSD::previousID, setDetUnitId(), CaloHitID::setID(), setTrackID(), showerParam, cond::rpcobgas::time, and CaloSD::updateHit().

Referenced by ProcessHits().

                                        {
  std::vector<HFShowerParam::Hit> hits = showerParam->getHits(aStep);
  int nHit = static_cast<int>(hits.size());

  if (nHit > 0) {
    preStepPoint  = aStep->GetPreStepPoint();
    int primaryID = setTrackID(aStep);
   
    int det   = 5;
#ifdef DebugLog
    edm::LogInfo("HcalSim") << "HCalSD::getFromParam " << nHit << " hits for " 
                            << GetName() << " of " << primaryID << " with " 
                            <<  aStep->GetTrack()->GetDefinition()->GetParticleName()
                            << " of " << preStepPoint->GetKineticEnergy()/GeV 
                            << " GeV in detector type " << det;
#endif
    for (int i = 0; i<nHit; ++i) {
      G4ThreeVector hitPoint = hits[i].position;
      int depth              = hits[i].depth;
      double time            = hits[i].time;
      unsigned int unitID    = setDetUnitId(det, hitPoint, depth);
      currentID.setID(unitID, time, primaryID, 0);
      edepositEM             = hits[i].edep*GeV; 
      edepositHAD            = 0.;
#ifdef DebugLog
      plotProfile(aStep, hitPoint, edepositEM, time, depth);
#endif

      // check if it is in the same unit and timeslice as the previous one
      if (currentID == previousID) {
        updateHit(currentHit);
      } else {
        posGlobal = preStepPoint->GetPosition();
        if (!checkHit()) currentHit = createNewHit();
      }
    }
  }
}

void HCalSD::getHitFibreBundle	(	G4Step *	step,
		bool	type
	)		`[private]`

Definition at line 852 of file HCalSD.cc.

References beta, CaloSD::checkHit(), CaloSD::createNewHit(), CaloSD::currentHit, CaloSD::currentID, CaloSD::edepositEM, CaloSD::edepositHAD, CaloSD::energyCut, HFShowerFibreBundle::getHits(), HFShowerFibreBundle::getRadius(), HcalNumberingScheme::getUnitID(), HcalForward, LogDebug, numberingFromDDD, numberingScheme, phi, plotProfile(), CaloSD::posGlobal, CaloSD::preStepPoint, CaloSD::previousID, CaloSD::resetForNewPrimary(), findQualityFiles::rr, CaloHitID::setID(), showerBundle, CaloSD::theTrack, cond::rpcobgas::time, tmp, HcalNumberingFromDDD::unitID(), and CaloSD::updateHit().

Referenced by ProcessHits().

                                                        {
  preStepPoint = aStep->GetPreStepPoint();
  theTrack     = aStep->GetTrack();
  double edep  = showerBundle->getHits(aStep, type);

  if (edep >= 0) {
    double etrack    = preStepPoint->GetKineticEnergy();
    int    primaryID = 0;
    if (etrack >= energyCut) {
      primaryID    = theTrack->GetTrackID();
    } else {
      primaryID    = theTrack->GetParentID();
      if (primaryID == 0) primaryID = theTrack->GetTrackID();
    }
    // Reset entry point for new primary
    posGlobal = preStepPoint->GetPosition();
    resetForNewPrimary(posGlobal, etrack);

    //
    int    det      = static_cast<int>(HcalForward);
    G4ThreeVector hitPoint = preStepPoint->GetPosition();   
    double rr       = (hitPoint.x()*hitPoint.x() + hitPoint.y()*hitPoint.y());
    double phi      = (rr == 0. ? 0. :atan2(hitPoint.y(),hitPoint.x()));
    double etaR     = showerBundle->getRadius();
    int depth       = 1;
    if (etaR < 0) {
      depth         = 2;
      etaR          =-etaR;
    }
    if (hitPoint.z() < 0) etaR =-etaR;
#ifdef DebugLog
    edm::LogInfo("HcalSim") << "HCalSD::Hit for Detector " << det << " etaR "
                            << etaR << " phi " << phi/deg << " depth " <<depth;
#endif
    double time = (aStep->GetPostStepPoint()->GetGlobalTime());
    uint32_t unitID = 0;
    if (numberingFromDDD) {
      HcalNumberingFromDDD::HcalID tmp = numberingFromDDD->unitID(det,etaR,phi,depth,1);
      if (numberingScheme) unitID = numberingScheme->getUnitID(tmp);
    }
    if (type) currentID.setID(unitID, time, primaryID, 3);
    else      currentID.setID(unitID, time, primaryID, 2);

    edepositHAD = aStep->GetTotalEnergyDeposit();
    edepositEM  =-edepositHAD + (edep*GeV);
#ifdef DebugLog
    plotProfile(aStep, hitPoint, edep*GeV, time, depth);
    double beta = preStepPoint->GetBeta();
    LogDebug("HcalSim") << "HCalSD::getHitFibreBundle 1 hit for " << GetName() 
                        << " of " << primaryID << " with " 
                        << theTrack->GetDefinition()->GetParticleName()
                        << " of " << preStepPoint->GetKineticEnergy()/GeV 
                        << " GeV with velocity " << beta << " UnitID "
                        << std::hex << unitID << std::dec;
#endif
    // check if it is in the same unit and timeslice as the previous one
    if (currentID == previousID) updateHit(currentHit);
    else if (!checkHit()) currentHit = createNewHit();
  } // non-zero energy deposit
}

void HCalSD::getHitPMT ( G4Step * step ) [private]

Definition at line 787 of file HCalSD.cc.

References beta, CaloSD::checkHit(), CaloSD::createNewHit(), CaloSD::currentHit, CaloSD::currentID, CaloSD::edepositEM, CaloSD::edepositHAD, CaloSD::energyCut, HFShowerPMT::getHits(), HFShowerPMT::getRadius(), HcalNumberingScheme::getUnitID(), HcalForward, LogDebug, numberingFromDDD, numberingScheme, phi, plotProfile(), CaloSD::posGlobal, CaloSD::preStepPoint, CaloSD::previousID, CaloSD::resetForNewPrimary(), findQualityFiles::rr, CaloHitID::setID(), showerPMT, CaloSD::theTrack, cond::rpcobgas::time, tmp, HcalNumberingFromDDD::unitID(), and CaloSD::updateHit().

Referenced by ProcessHits().

                                      {

  preStepPoint = aStep->GetPreStepPoint();
  theTrack     = aStep->GetTrack();
  double edep  = showerPMT->getHits(aStep);

  if (edep >= 0) {
    double etrack    = preStepPoint->GetKineticEnergy();
    int    primaryID = 0;
    if (etrack >= energyCut) {
      primaryID    = theTrack->GetTrackID();
    } else {
      primaryID    = theTrack->GetParentID();
      if (primaryID == 0) primaryID = theTrack->GetTrackID();
    }
    // Reset entry point for new primary
    posGlobal = preStepPoint->GetPosition();
    resetForNewPrimary(posGlobal, etrack);

    //
    int    det      = static_cast<int>(HcalForward);
    G4ThreeVector hitPoint = preStepPoint->GetPosition();   
    double rr       = (hitPoint.x()*hitPoint.x() + hitPoint.y()*hitPoint.y());
    double phi      = (rr == 0. ? 0. :atan2(hitPoint.y(),hitPoint.x()));
    double etaR     = showerPMT->getRadius();
    int depth       = 1;
    if (etaR < 0) {
      depth         = 2;
      etaR          =-etaR;
    }
    if (hitPoint.z() < 0) etaR =-etaR;
#ifdef DebugLog
    edm::LogInfo("HcalSim") << "HCalSD::Hit for Detector " << det << " etaR "
                            << etaR << " phi " << phi/deg << " depth " <<depth;
#endif
    double time = (aStep->GetPostStepPoint()->GetGlobalTime());
    uint32_t unitID = 0;
    if (numberingFromDDD) {
      HcalNumberingFromDDD::HcalID tmp = numberingFromDDD->unitID(det,etaR,phi,
                                                                  depth,1);
      if (numberingScheme) unitID = numberingScheme->getUnitID(tmp);
    }
    currentID.setID(unitID, time, primaryID, 1);

    edepositHAD = aStep->GetTotalEnergyDeposit();
    edepositEM  =-edepositHAD + (edep*GeV);
#ifdef DebugLog
    plotProfile(aStep, hitPoint, edep*GeV, time, depth);
    double beta = preStepPoint->GetBeta();
    LogDebug("HcalSim") << "HCalSD::getHitPMT 1 hit for " << GetName() 
                        << " of " << primaryID << " with " 
                        << theTrack->GetDefinition()->GetParticleName()
                        << " of " << preStepPoint->GetKineticEnergy()/GeV 
                        << " GeV with velocity " << beta << " UnitID "
                        << std::hex << unitID << std::dec;
#endif
    // check if it is in the same unit and timeslice as the previous one
    if      (currentID == previousID) {
      updateHit(currentHit);
    } else {
      if (!checkHit()) currentHit = createNewHit();
    }
  }
}

std::vector< G4String > HCalSD::getNames ( DDFilteredView & fv ) [private]

Definition at line 561 of file HCalSD.cc.

References DDFilteredView::firstChild(), i, funct::log(), DDFilteredView::logicalPart(), DDName::name(), DDBase< N, C >::name(), DDFilteredView::next(), convertSQLiteXML::ok, and tmp.

                                                       {

  std::vector<G4String> tmp;
  bool dodet = fv.firstChild();
  while (dodet) {
    const DDLogicalPart & log = fv.logicalPart();
    bool ok = true;

    for (unsigned int i=0; i<tmp.size(); ++i) {
      if (!strcmp(tmp[i].c_str(), log.name().name().c_str())) {
        ok = false;
        break;
      }
    }
    if (ok) tmp.push_back(log.name().name());
    dodet = fv.next();
  }
  return tmp;
}

void HCalSD::hitForFibre ( G4Step * step ) [private]

Definition at line 701 of file HCalSD.cc.

References CaloSD::checkHit(), CaloSD::createNewHit(), CaloSD::currentHit, CaloSD::currentID, CaloSD::edepositEM, CaloSD::edepositHAD, CaloSD::emPDG, CaloSD::epPDG, CaloSD::gammaPDG, HFShower::getHits(), hfshower, i, plotProfile(), CaloSD::posGlobal, CaloSD::preStepPoint, CaloSD::previousID, setDetUnitId(), CaloHitID::setID(), setTrackID(), CaloSD::theTrack, cond::rpcobgas::time, and CaloSD::updateHit().

Referenced by ProcessHits().

                                       { // if not ParamShower

  preStepPoint  = aStep->GetPreStepPoint();
  theTrack      = aStep->GetTrack();
  int primaryID = setTrackID(aStep);

  int det   = 5;
  std::vector<HFShower::Hit> hits = hfshower->getHits(aStep);

  G4int particleCode = theTrack->GetDefinition()->GetPDGEncoding();
  if (particleCode==emPDG || particleCode==epPDG || particleCode==gammaPDG) {
    edepositEM  = 1.*GeV;
    edepositHAD = 0.;
  } else {
    edepositEM  = 0.;
    edepositHAD = 1.*GeV;
  }
 
#ifdef DebugLog
  edm::LogInfo("HcalSim") << "HCalSD::hitForFibre " << hits.size() 
     << " hits for " << GetName() << " of " << primaryID 
     << " with " << theTrack->GetDefinition()->GetParticleName() 
     << " of " << preStepPoint->GetKineticEnergy()/GeV 
     << " GeV in detector type " << det;
#endif
  if (hits.size() > 0) {
    G4ThreeVector hitPoint = preStepPoint->GetPosition();
    for (unsigned int i=0; i<hits.size(); ++i) {
      G4ThreeVector hitPoint = hits[i].position;
      int depth              = hits[i].depth;
      double time            = hits[i].time;
      unsigned int unitID = setDetUnitId(det, hitPoint, depth);
      currentID.setID(unitID, time, primaryID, 0);
#ifdef DebugLog
      plotProfile(aStep, hitPoint, edepositEM, time, depth);
#endif
      // check if it is in the same unit and timeslice as the previous one
      if (currentID == previousID) {
        updateHit(currentHit);
      } else {
        posGlobal = preStepPoint->GetPosition();
        if (!checkHit()) currentHit = createNewHit();
      }
    }
  }
}

void HCalSD::initRun ( ) [protected, virtual]

Reimplemented from CaloSD.

Definition at line 492 of file HCalSD.cc.

References hfshower, HFShowerLibrary::initRun(), HFShower::initRun(), HFShowerParam::initRun(), mumPDG, mupPDG, showerLibrary, and showerParam.

                     {
  G4ParticleTable * theParticleTable = G4ParticleTable::GetParticleTable();
  G4String          particleName;
  mumPDG = theParticleTable->FindParticle(particleName="mu-")->GetPDGEncoding();
  mupPDG = theParticleTable->FindParticle(particleName="mu+")->GetPDGEncoding();
#ifdef DebugLog
  edm::LogInfo("HcalSim") << "HCalSD: Particle code for mu- = " << mumPDG
                          << " for mu+ = " << mupPDG;
#endif
  if (showerLibrary) showerLibrary->initRun(theParticleTable);
  if (showerParam)   showerParam->initRun(theParticleTable);
  if (hfshower)      hfshower->initRun(theParticleTable);
}

bool HCalSD::isItConicalBundle ( G4LogicalVolume * lv ) [private]

Definition at line 623 of file HCalSD.cc.

References fibre2LV.

Referenced by ProcessHits().

                                                   {
  std::vector<G4LogicalVolume*>::const_iterator ite = fibre2LV.begin();
  for (; ite != fibre2LV.end(); ++ite) if (lv == *ite) return true;
  return false;
}

bool HCalSD::isItFibre ( G4LogicalVolume * lv ) [private]

Definition at line 599 of file HCalSD.cc.

References fibreLV.

Referenced by HCalSD(), and ProcessHits().

                                           {
  std::vector<G4LogicalVolume*>::const_iterator ite = fibreLV.begin();
  for (; ite != fibreLV.end(); ++ite) if (lv == *ite) return true;
  return false;
}

bool HCalSD::isItFibre ( G4String name ) [private]

Definition at line 605 of file HCalSD.cc.

References fibreNames.

                                     {
  std::vector<G4String>::const_iterator it = fibreNames.begin();
  for (; it != fibreNames.end(); ++it) if (name == *it) return true;
  return false;
}

bool HCalSD::isItHF ( G4Step * aStep ) [private]

Definition at line 581 of file HCalSD.cc.

References hfLevels, hfLV, and hfNames.

Referenced by HCalSD(), and ProcessHits().

                                  {
  const G4VTouchable* touch = aStep->GetPreStepPoint()->GetTouchable();
  int levels = (touch->GetHistoryDepth()) + 1;
  for (unsigned int it=0; it < hfNames.size(); ++it) {
    if (levels >= hfLevels[it]) {
      G4LogicalVolume* lv = touch->GetVolume(levels-hfLevels[it])->GetLogicalVolume();
      if (lv == hfLV[it]) return true;
    }
  }
  return false;
}

bool HCalSD::isItHF ( G4String name ) [private]

Definition at line 593 of file HCalSD.cc.

References hfNames.

                                  {
  std::vector<G4String>::const_iterator it = hfNames.begin();
  for (; it != hfNames.end(); ++it) if (name == *it) return true;
  return false;
}

bool HCalSD::isItPMT ( G4LogicalVolume * lv ) [private]

Definition at line 611 of file HCalSD.cc.

References pmtLV.

Referenced by ProcessHits().

                                         {
  std::vector<G4LogicalVolume*>::const_iterator ite = pmtLV.begin();
  for (; ite != pmtLV.end(); ++ite) if (lv == *ite) return true;
  return false;
}

bool HCalSD::isItScintillator ( G4Material * mat ) [private]

Definition at line 629 of file HCalSD.cc.

References materials.

Referenced by getEnergyDeposit().

                                              {
  std::vector<G4Material*>::const_iterator ite = materials.begin();
  for (; ite != materials.end(); ++ite) if (mat == *ite) return true;
  return false;
}

bool HCalSD::isItStraightBundle ( G4LogicalVolume * lv ) [private]

Definition at line 617 of file HCalSD.cc.

References fibre1LV.

Referenced by ProcessHits().

                                                    {
  std::vector<G4LogicalVolume*>::const_iterator ite = fibre1LV.begin();
  for (; ite != fibre1LV.end(); ++ite) if (lv == *ite) return true;
  return false;
}

double HCalSD::layerWeight	(	int	det,
		G4ThreeVector	pos,
		int	depth,
		int	lay
	)		`[private]`

Definition at line 959 of file HCalSD.cc.

References HcalNumberingFromDDD::HcalID::etaR, HcalNumberingFromDDD::HcalID::lay, layerWeights, numberingFromDDD, HcalTestNumbering::packHcalIndex(), HcalNumberingFromDDD::HcalID::phis, HcalNumberingFromDDD::HcalID::subdet, tmp, HcalNumberingFromDDD::unitID(), and HcalNumberingFromDDD::HcalID::zside.

Referenced by getEnergyDeposit().

                                                                         { 

  double wt = 1.;
  if (numberingFromDDD) {
    //get the ID's as eta, phi, depth, ... indices
    HcalNumberingFromDDD::HcalID tmp = numberingFromDDD->unitID(det, pos, 
                                                                depth, lay);
    uint32_t id = HcalTestNumbering::packHcalIndex(tmp.subdet, tmp.zside, 1,
                                                   tmp.etaR, tmp.phis,tmp.lay);
    std::map<uint32_t,double>::const_iterator ite = layerWeights.find(id);
    if (ite != layerWeights.end()) wt = ite->second;
#ifdef DebugLog
    edm::LogInfo("HcalSim") << "HCalSD::layerWeight: ID " << std::hex << id 
                            << std::dec << " (" << tmp.subdet << "/"  
                            << tmp.zside << "/1/" << tmp.etaR << "/" 
                            << tmp.phis << "/"  << tmp.lay << ") Weight " <<wt;
#endif
  }
  return wt;
}

void HCalSD::plotProfile	(	G4Step *	step,
		G4ThreeVector	pos,
		double	edep,
		double	time,
		int	id
	)		`[private]`

Definition at line 980 of file HCalSD.cc.

References abs, dist_, newFWLiteAna::found, hit_, UserOptions_cff::idx, LogDebug, n, SensitiveDetector::name, cond::rpcobgas::time, and time_.

Referenced by getFromLibrary(), getFromParam(), getHitFibreBundle(), getHitPMT(), hitForFibre(), and ProcessHits().

                                              { 

  const G4VTouchable* touch = aStep->GetPreStepPoint()->GetTouchable();
  static G4String modName[8] = {"HEModule", "HVQF" , "HBModule", "MBAT",
                                "MBBT"    , "MBBTC", "MBBT_R1P", "MBBT_R1M"};
  G4ThreeVector local;
  bool found=false;
  double depth=-2000;
  int idx = 4;
  for (int n=0; n<touch->GetHistoryDepth(); ++n) {
    G4String name = touch->GetVolume(n)->GetName();
#ifdef DebugLog
    LogDebug("HcalSim") << "plotProfile Depth " << n << " Name " << name;
#endif
    for (unsigned int ii=0; ii<8; ++ii) {
      if (name == modName[ii]) {
        found = true;
        int dn = touch->GetHistoryDepth() - n;
        local = touch->GetHistory()->GetTransform(dn).TransformPoint(global);
        if      (ii == 0) {depth = local.z() - 4006.5; idx = 1;}
        else if (ii == 1) {depth = local.z() + 825.0;  idx = 3;}
        else if (ii == 2) {depth = local.x() - 1775.;  idx = 0;}
        else              {depth = local.y() + 15.;    idx = 2;}
        break;
      }
    }
    if (found) break;
  }
  if (!found) depth = std::abs(global.z()) - 11500;
#ifdef DebugLog
  LogDebug("HcalSim") << "plotProfile Found " << found << " Global " << global
                      << " Local " << local << " depth " << depth << " ID " << id
                      << " EDEP " << edep << " Time " << time;
#endif
  if (hit_[idx]  != 0) hit_[idx]->Fill(edep);
  if (time_[idx] != 0) time_[idx]->Fill(time,edep);
  if (dist_[idx] != 0) dist_[idx]->Fill(depth,edep);
  int jd = 2*idx + id - 7;
  if (jd >= 0 && jd < 4) {
    jd += 5;
    if (hit_[jd]  != 0) hit_[jd]->Fill(edep);
    if (time_[jd] != 0) time_[jd]->Fill(time,edep);
    if (dist_[jd] != 0) dist_[jd]->Fill(depth,edep);
  }
}

bool HCalSD::ProcessHits	(	G4Step *	aStep,
		G4TouchableHistory *
	)		`[virtual]`

Reimplemented from CaloSD.

Definition at line 341 of file HCalSD.cc.

References CaloSD::createNewHit(), CaloSD::currentHit, CaloSD::edepositEM, CaloSD::edepositHAD, getFromLibrary(), getFromParam(), getHitFibreBundle(), getHitPMT(), CaloSD::getNumberOfHits(), CaloSD::getStepInfo(), CaloSD::hitExists(), hitForFibre(), isItConicalBundle(), isItFibre(), isItHF(), isItPMT(), isItStraightBundle(), LogDebug, mumPDG, mupPDG, SensitiveDetector::NaNTrap(), NULL, plotProfile(), showerBundle, showerPMT, useFibreBundle, useParam, usePMTHit, and useShowerLibrary.

                                                              {

  NaNTrap( aStep ) ;
  
  if (aStep == NULL) {
    return true;
  } else {
    G4LogicalVolume* lv= aStep->GetPreStepPoint()->GetPhysicalVolume()->GetLogicalVolume();
    G4String nameVolume = lv->GetName();
    if (isItHF(aStep)) {
      G4int parCode =aStep->GetTrack()->GetDefinition()->GetPDGEncoding();
      if (useParam) {
#ifdef DebugLog
        LogDebug("HcalSim") << "HCalSD: " << getNumberOfHits()
                            << " hits from parametrization in " << nameVolume 
                            << " for Track " << aStep->GetTrack()->GetTrackID()
                            <<" (" << aStep->GetTrack()->GetDefinition()->GetParticleName() 
                            <<")";
#endif
        getFromParam(aStep);
#ifdef DebugLog
        LogDebug("HcalSim") << "HCalSD: " << getNumberOfHits() 
                            << " hits afterParamS*";
#endif 
      } else {
        bool notaMuon = true;
        if (parCode == mupPDG || parCode == mumPDG ) notaMuon = false;
        if (useShowerLibrary && notaMuon) {
#ifdef DebugLog
          LogDebug("HcalSim") << "HCalSD: Starts shower library from " 
                              << nameVolume << " for Track " 
                              << aStep->GetTrack()->GetTrackID() << " ("
                              <<aStep->GetTrack()->GetDefinition()->GetParticleName()<<")";
#endif
          getFromLibrary(aStep);
        } else if (isItFibre(lv)) {
#ifdef DebugLog
          LogDebug("HcalSim") << "HCalSD: Hit at Fibre in " << nameVolume 
                              << " for Track " 
                              << aStep->GetTrack()->GetTrackID() <<" ("
                              <<aStep->GetTrack()->GetDefinition()->GetParticleName()<<")";
#endif
          hitForFibre(aStep);
        }
      }
    } else if (isItPMT(lv)) {
#ifdef DebugLog
      LogDebug("HcalSim") << "HCalSD: Hit from PMT parametrization from " 
                          <<  nameVolume << " for Track " 
                          << aStep->GetTrack()->GetTrackID() << " ("
                          << aStep->GetTrack()->GetDefinition()->GetParticleName() << ")";
#endif
      if (usePMTHit && showerPMT) getHitPMT(aStep);
    } else if (isItStraightBundle(lv) || isItConicalBundle(lv)) {
#ifdef DebugLog
      LogDebug("HcalSim") << "HCalSD: Hit from FibreBundle from "
                          << nameVolume << " for Track " 
                          << aStep->GetTrack()->GetTrackID() << " ("
                          << aStep->GetTrack()->GetDefinition()->GetParticleName() << ")";
#endif
      if (useFibreBundle && showerBundle) getHitFibreBundle(aStep, isItConicalBundle(lv));
    } else {
#ifdef DebugLog
      LogDebug("HcalSim") << "HCalSD: Hit from standard path from " 
                          <<  nameVolume << " for Track " 
                          << aStep->GetTrack()->GetTrackID() << " ("
                          << aStep->GetTrack()->GetDefinition()->GetParticleName() << ")";
#endif
      if (getStepInfo(aStep)) {
#ifdef DebugLog
        if (edepositEM+edepositHAD > 0)
          plotProfile(aStep, aStep->GetPreStepPoint()->GetPosition(),
                      edepositEM+edepositHAD,aStep->GetPostStepPoint()->GetGlobalTime(),0);
#endif
        if (hitExists() == false && edepositEM+edepositHAD>0.) currentHit = createNewHit();
      }
    }
    return true;
  }
}

void HCalSD::readWeightFromFile ( std::string fName ) [private]

Definition at line 933 of file HCalSD.cc.

References recoMuon::in, EdgesToViz::infile, layerWeights, HcalTestNumbering::packHcalIndex(), phi, and useLayerWt.

Referenced by HCalSD().

                                               {

  std::ifstream infile;
  int entry=0;
  infile.open(fName.c_str(), std::ios::in);
  if (infile) {
    int    det, zside, etaR, phi, lay;
    double wt;
    while (infile >> det >> zside >> etaR >> phi >> lay >> wt) {
      uint32_t id = HcalTestNumbering::packHcalIndex(det,zside,1,etaR,phi,lay);
      layerWeights.insert(std::pair<uint32_t,double>(id,wt));
      ++entry;
#ifdef DebugLog
      edm::LogInfo("HcalSim") << "HCalSD::readWeightFromFile:Entry " << entry
                              << " ID " << std::hex << id << std::dec << " ("
                              << det << "/" << zside << "/1/" << etaR << "/"
                              << phi << "/" << lay << ") Weight " << wt;
#endif
    }
    infile.close();
  }
  edm::LogInfo("HcalSim") << "HCalSD::readWeightFromFile: reads " << entry
                          << " weights from " << fName;
  if (entry <= 0) useLayerWt = false;
}

uint32_t HCalSD::setDetUnitId ( G4Step * step ) [virtual]

Implements CaloSD.

Definition at line 471 of file HCalSD.cc.

References CaloSD::preStepPoint.

Referenced by getFromLibrary(), getFromParam(), and hitForFibre().

                                            { 

  G4StepPoint* preStepPoint = aStep->GetPreStepPoint(); 
  const G4VTouchable* touch = preStepPoint->GetTouchable();
  G4ThreeVector hitPoint    = preStepPoint->GetPosition();

  int depth = (touch->GetReplicaNumber(0))%10 + 1;
  int lay   = (touch->GetReplicaNumber(0)/10)%100 + 1;
  int det   = (touch->GetReplicaNumber(1))/1000;

  return setDetUnitId (det, hitPoint, depth, lay);
}

uint32_t HCalSD::setDetUnitId	(	int	det,
		G4ThreeVector	pos,
		int	depth,
		int	lay = `1`
	)		`[private]`

Definition at line 525 of file HCalSD.cc.

References HcalNumberingScheme::getUnitID(), numberingFromDDD, numberingScheme, tmp, and HcalNumberingFromDDD::unitID().

                                                                               { 
  uint32_t id = 0;
  if (numberingFromDDD) {
    //get the ID's as eta, phi, depth, ... indices
    HcalNumberingFromDDD::HcalID tmp = numberingFromDDD->unitID(det, pos, depth, lay);
    //get the ID
    if (numberingScheme) id = numberingScheme->getUnitID(tmp);
  }
  return id;
}

void HCalSD::setNumberingScheme ( HcalNumberingScheme * scheme )

Definition at line 484 of file HCalSD.cc.

References numberingScheme.

Referenced by HCalSD(), HcalTB04Analysis::update(), HcalTestAnalysis::update(), and SimG4HcalValidation::update().

                                                            {
  if (scheme != 0) {
    edm::LogInfo("HcalSim") << "HCalSD: updates numbering scheme for " << GetName() <<"\n";
    if (numberingScheme) delete numberingScheme;
    numberingScheme = scheme;
  }
}

int HCalSD::setTrackID ( G4Step * step ) [private]

Definition at line 913 of file HCalSD.cc.

References TrackInformation::getIDonCaloSurface(), CaloSD::preStepPoint, CaloSD::previousID, CaloSD::resetForNewPrimary(), CaloSD::theTrack, and CaloHitID::trackID().

Referenced by getFromLibrary(), getFromParam(), and hitForFibre().

                                     {
  theTrack     = aStep->GetTrack();

  double etrack = preStepPoint->GetKineticEnergy();
  TrackInformation * trkInfo = (TrackInformation *)(theTrack->GetUserInformation());
  int      primaryID = trkInfo->getIDonCaloSurface();
  if (primaryID == 0) {
#ifdef DebugLog
    edm::LogInfo("HcalSim") << "HCalSD: Problem with primaryID **** set by "
       << "force to TkID **** " <<theTrack->GetTrackID();
#endif
    primaryID = theTrack->GetTrackID();
  }

  if (primaryID != previousID.trackID())
    resetForNewPrimary(preStepPoint->GetPosition(), etrack);

  return primaryID;
}