#include <OptOSensor2D.h>

Inheritance diagram for OptOSensor2D:

Public Member Functions
void	constructSolidShape ()

ALIdouble *	convertPointToLocalCoordinates (const CLHEP::Hep3Vector &point)

virtual void	defaultBehaviour (LightRay &lightray, Measurement &meas)

virtual void	detailedTraversesLightRay (LightRay &lightray)

virtual void	fastTraversesLightRay (LightRay &lightray)

virtual void	fillExtraEntry (std::vector< ALIstring > &wordlist)

virtual void	makeMeasurement (LightRay &lightray, Measurement &meas)

	OptOSensor2D ()

	OptOSensor2D (OpticalObject *parent, const ALIstring &type, const ALIstring &name, const ALIbool copy_data)

	~OptOSensor2D ()

Public Member Functions inherited from OpticalObject
void	addCoordinateEntryToList (Entry *entry)

void	addExtraEntryToList (Entry *entry)

void	addExtraEntryValueOriginalOriginalToList (ALIdouble entry_value)

void	addExtraEntryValueOriginalToList (ALIdouble entry_value)

void	addExtraEntryValueToList (ALIdouble entry_value)

double	addPii (double val)

double	approxTo0 (double val)

CLHEP::HepRotation	buildRmFromEntryValuesOriginalOriginal ()

const CLHEP::Hep3Vector &	centreGlob () const

const CLHEP::Hep3Vector &	centreGlobal () const

const CLHEP::Hep3Vector &	centreGlobOriginal () const

const CLHEP::Hep3Vector &	centreGlobOriginalOriginal () const

const CLHEP::Hep3Vector	centreLocal () const

int	checkMatrixEquations (double angleX, double angleY, double angleZ, CLHEP::HepRotation *rot=0)

void	construct ()

void	constructFromOptAligInfo (const OpticalAlignInfo &oaInfo)

virtual void	constructMaterial ()

const std::vector< Entry * > &	CoordinateEntryList () const

void	createComponentOptOsFromOptAlignInfo ()

virtual void	detailedDeviatesLightRay (LightRay &lightray)

double	diff2pi (double ang1, double ang2)

void	displaceCentreGlob (const XYZcoor coor, const ALIdouble disp)

void	displaceCentreGlob (const CLHEP::Hep3Vector &dispVec)

void	displaceCentreGlobOriginal (const XYZcoor coor, const ALIdouble disp)

void	displaceCentreGlobOriginal (const CLHEP::Hep3Vector &dispVec)

void	displaceCentreGlobOriginalOriginal (const XYZcoor coor, const ALIdouble disp)

void	displaceCentreGlobOriginalOriginal (const CLHEP::Hep3Vector &dispVec)

void	displaceExtraEntry (const ALIuint entryNo, const ALIdouble disp)

void	displaceExtraEntryOriginal (const ALIuint entryNo, const ALIdouble disp)

void	displaceExtraEntryOriginalOriginal (const ALIuint entryNo, const ALIdouble disp)

void	displaceRmGlobAroundGlobal (OpticalObject *opto1stRotated, const XYZcoor coor, const ALIdouble disp)

void	displaceRmGlobAroundLocal (OpticalObject *opto1stRotated, const XYZcoor coor, const ALIdouble disp)

void	displaceRmGlobOriginal (const OpticalObject *opto1stRotated, const XYZcoor coor, const ALIdouble disp)

void	displaceRmGlobOriginalOriginal (const OpticalObject *opto1stRotated, const XYZcoor coor, const ALIdouble disp)

bool	eq2ang (double ang1, double ang2)

const std::vector< Entry * > &	ExtraEntryList () const

const ALIint	extraEntryNo (const ALIstring &entry_name) const

std::vector< ALIdouble > &	ExtraEntryValueList ()

const std::vector< ALIdouble > &	ExtraEntryValueOriginalList ()

const std::vector< ALIdouble > &	ExtraEntryValueOriginalOriginalList ()

virtual void	fastDeviatesLightRay (LightRay &lightray)

virtual void	fillIguana ()

virtual void	fillVRML ()

const ALIdouble	findExtraEntryValue (const ALIstring &eename) const

const ALIbool	findExtraEntryValueIfExists (const ALIstring &eename, ALIdouble &value) const

const ALIdouble	findExtraEntryValueMustExist (const ALIstring &eename) const

const ALIuint	getCmsswID () const

std::vector< ALIstring >	getCoordinateFromOptAlignParam (const OpticalAlignParam &oaParam)

CLHEP::Hep3Vector	getDisplacementInLocalCoordinates (const XYZcoor coor, const ALIdouble disp)

const double	getEntryCentre (const XYZcoor coor) const

const double	getEntryCentre (const ALIstring &coor) const

const double	getEntryRMangle (const XYZcoor coor) const

const double	getEntryRMangle (const ALIstring &coor) const

std::vector< double >	getLocalRotationAngles (std::vector< Entry * > entries) const

CocoaMaterialElementary *	getMaterial () const

ALIPlane	getPlate (const ALIbool forwardPlate, const ALIbool applyWedge)

std::vector< double >	getRotationAnglesFromMatrix (CLHEP::HepRotation &rmLocal, std::vector< Entry * > entries) const

std::vector< double >	getRotationAnglesInOptOFrame (const OpticalObject optoAncestor, std::vector< Entry > entries) const

CocoaSolidShape *	getSolidShape () const

CLHEP::Hep3Vector	getZAxis ()

const ALIuint	ID () const

const ALIstring	longName () const

Measurement *	meas ()

const ALIstring &	name () const

	OpticalObject ()

	OpticalObject (OpticalObject *parent, const ALIstring &type, const ALIstring &name, const ALIbool copy_data)

const OpticalObject *	parent () const

virtual void	participateInMeasurement (LightRay &lightray, Measurement &meas, const ALIstring &behav)

void	propagateGlobalRMOriginalOriginalChangeToChildren (const CLHEP::HepRotation &rmorioriold, const CLHEP::HepRotation &rmoriorinew)

void	resetGlobalCoordinates ()

void	resetOriginalOriginalCoordinates ()

const CLHEP::HepRotation &	rmGlob () const

const CLHEP::HepRotation &	rmGlobOriginal () const

const CLHEP::HepRotation &	rmGlobOriginalOriginal () const

const CLHEP::HepRotation	rmLocal () const

void	setCmsswID (ALIuint id)

void	setExtraEntryValue (const ALIuint entryNo, const ALIdouble disp)

void	setGlobalCoordinates ()

void	setGlobalRMOriginalOriginal (const CLHEP::HepRotation &rmoriori)

void	setID (ALIuint id)

void	setMeas (Measurement *meas)
	set current measurement More...

void	setOriginalEntryValues ()

void	setRmGlobal (const CLHEP::HepRotation &rm)

void	setRmGlobalOriginal (const CLHEP::HepRotation &rm)

void	setType (const ALIstring &type)

const ALIstring	shortName () const

const ALIstring &	type () const

virtual void	userDefinedBehaviour (LightRay &lightray, Measurement &meas, const ALIstring &behav)

virtual	~OpticalObject ()

Private Attributes
DeviationsFromFileSensor2D *	deviFromFile

ALIbool	fdevi_from_file

Additional Inherited Members
Protected Attributes inherited from OpticalObject
CocoaMaterialElementary *	theMaterial

CocoaSolidShape *	theSolidShape

ALIint	verbose

Detailed Description

Definition at line 19 of file OptOSensor2D.h.

Constructor & Destructor Documentation

OptOSensor2D::OptOSensor2D ( )

inline

Definition at line 24 of file OptOSensor2D.h.

24 { };

OptOSensor2D::OptOSensor2D	(	OpticalObject *	parent,
		const ALIstring &	type,
		const ALIstring &	name,
		const ALIbool	copy_data
	)

inline

Definition at line 25 of file OptOSensor2D.h.

25 :

26 OpticalObject( parent, type, name, copy_data), fdevi_from_file(0){ };

type

Definition: HCALResponse.h:22

OpticalObject::OpticalObject

OpticalObject()

Definition: OpticalObject.h:41

OptOSensor2D::fdevi_from_file

ALIbool fdevi_from_file

Definition: OptOSensor2D.h:53

OpticalObject::name

const ALIstring & name() const

Definition: OpticalObject.h:60

OptOSensor2D::~OptOSensor2D ( )

inline

Definition at line 27 of file OptOSensor2D.h.

27 { };

Member Function Documentation

void OptOSensor2D::constructSolidShape ( )

virtual

Reimplemented from OpticalObject.

Definition at line 440 of file OptOSensor2D.cc.

References GlobalOptionMgr::getGlobalOptionValue(), GlobalOptionMgr::getInstance(), and m.

 {
   ALIdouble go;
   GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
   gomgr->getGlobalOptionValue("VisScale", go );
 
   theSolidShape = new CocoaSolidShapeBox( "Box", go*4.*cm/m, go*4.*cm/m, go*1.*cm/m ); //COCOA internal units are meters
 }

ALIdouble * OptOSensor2D::convertPointToLocalCoordinates ( const CLHEP::Hep3Vector & point )

Definition at line 385 of file OptOSensor2D.cc.

References gather_cfg::cout, ALIUtils::debug, ALIUtils::dump3v(), and ALIUtils::dumprm().

 {
   ALIdouble* interslc = new ALIdouble[2];
   
   //----- X value
   CLHEP::HepRotation rmt = rmGlob();
   CLHEP::Hep3Vector XAxism(1.,0.,0.);
   XAxism*=rmt;
   if( ALIUtils::debug >= 5) ALIUtils::dump3v( (this)->centreGlob(),  "centre glob sensor2D" );
   if( ALIUtils::debug >= 5) ALIUtils::dumprm( rmt,  "rotation matrix sensor2D" );
   //t  ALIUtils::dump3v(point - (this)->centreGlob() , "inters - (this)->centreGlob()");
   if( ALIUtils::debug >= 5) ALIUtils::dump3v(XAxism , "XAxism");
   interslc[0] = (point - (this)->centreGlob() ) * XAxism;
   
   //----- Y value
   CLHEP::Hep3Vector YAxism(0.,1.,0.);
   YAxism*=rmt;
   if( ALIUtils::debug >= 5)
 ALIUtils::dump3v(YAxism , "YAxism");
   interslc[1] = (point - (this)->centreGlob() ) * YAxism;
   
   if( ALIUtils::debug >= 5 ) {
     std::cout << " intersection in local coordinates: X= " << interslc[0] << "  Y= " << interslc[1] << std::endl;
     ALIUtils::dump3v( point - (this)->centreGlob() , " inters - centre " );
   }
   return interslc;
 }

void OptOSensor2D::defaultBehaviour	(	LightRay &	lightray,
		Measurement &	meas
	)

virtual

Reimplemented from OpticalObject.

Definition at line 33 of file OptOSensor2D.cc.

 {
   makeMeasurement( lightray, meas);
 }

void OptOSensor2D::detailedTraversesLightRay ( LightRay & lightray )

virtual

Reimplemented from OpticalObject.

Definition at line 238 of file OptOSensor2D.cc.

References DeviationsFromFileSensor2D::apply(), dtNoiseDBValidation_cfg::cerr, gather_cfg::cout, ALIUtils::debug, LightRay::dumpData(), LightRay::intersect(), mergeVDriftHistosByStation::name, LightRay::point(), LightRay::refract(), DeviationsFromFileSensor2D::setApply(), LightRay::setPoint(), and tablePrinter::width.

 {
   if (ALIUtils::debug >= 4) std::cout << "%%% LR: DETAILED TRAVERSES SENSOR2D  " << name() << std::endl;
   if( DeviationsFromFileSensor2D::apply() && fdevi_from_file) {
    DeviationsFromFileSensor2D::setApply( 0 );
    //- std::cout << "fdeviFromFile" << fdevi_from_file << std::endl;
     if(ALIUtils::debug >= 0 )std::cerr << "!!WARNING: sensor " << name() << " has read deviation from file and it will not be taken into account. Please use FAST TRAVERSES" << deviFromFile << std::endl;
   }
 
   //---------- If width is 0, just keep the intersection point 
   ALIdouble width = findExtraEntryValue("width");
   if( width == 0 ) {
     //---------- Get intersection 
     CLHEP::Hep3Vector ZAxis(0.,0,1.);
     CLHEP::HepRotation rmt = rmGlob();
     ZAxis = rmt * ZAxis;
     lightray.intersect( ALIPlane(centreGlob(), ZAxis) );
     CLHEP::Hep3Vector inters = lightray.point();
     lightray.setPoint( inters );
     if (ALIUtils::debug >= 2) {
       lightray.dumpData("LightRay Sensor2D traversed: "); 
     }
     return;
   }
 
   if (ALIUtils::debug >= 4) std::cout << std::endl << "$$$ LR: REFRACTION IN FORWARD PLATE " << std::endl;
   //---------- Get forward plate
   ALIPlane plate = getPlate(1, 1);
   //---------- Refract while entering object
   ALIdouble refra_ind1 = 1.;
   ALIdouble refra_ind2 = findExtraEntryValueMustExist("refra_ind");
   lightray.refract( plate, refra_ind1, refra_ind2 );
 
   if (ALIUtils::debug >= 4) std::cout << std::endl << "$$$ LR: REFRACTION IN BACKWARD PLATE " << std::endl;
   //---------- Get backward plate
   plate = getPlate(0, 1);
   //---------- Refract while exiting splitter
   lightray.refract( plate, refra_ind2, refra_ind1 );
 
   CLHEP::Hep3Vector inters = lightray.point();
   lightray.setPoint( inters );
 
   if (ALIUtils::debug >= 4) {
     lightray.dumpData("LightRay Sensor2D traversed: "); 
   }
 
 
 }     

void OptOSensor2D::fastTraversesLightRay ( LightRay & lightray )

virtual

Reimplemented from OpticalObject.

Definition at line 119 of file OptOSensor2D.cc.

References DeviationsFromFileSensor2D::apply(), dtNoiseDBValidation_cfg::cerr, gather_cfg::cout, ALIUtils::debug, LightRay::dumpData(), LightRay::intersect(), ALIUtils::LengthValueDimensionFactor(), Model::MeasurementList(), Entry::name(), mergeVDriftHistosByStation::name, LightRay::point(), LightRay::setPoint(), Entry::setValue(), LightRay::shiftAndDeviateWhileTraversing(), Entry::value(), and Measurement::value().

 {
   verbose = ALIUtils::debug;
   if (ALIUtils::debug >= 2) std::cout << "LR: FAST TRAVERSES SENSOR2D  " << name() << std::endl;
 
   //---------- Shift and Deviate
 
   //---------- Get intersection 
   CLHEP::Hep3Vector ZAxis(0.,0,1.);
   CLHEP::HepRotation rmt = rmGlob();
   ZAxis = rmt * ZAxis;
   lightray.intersect( ALIPlane(centreGlob(), ZAxis) );
   CLHEP::Hep3Vector inters = lightray.point();
 
   ALIdouble deviX, deviY, devi;
   // if deviationsFromFile are applied and this sensors has them get the deviations that corresponds to the intersection point.
   // Set this deviation as original one, as it will not be changed for derivatives
   if( DeviationsFromFileSensor2D::apply() && fdevi_from_file) {
     //-    std::cout << " DeviationsFromFileSensor2D::apply() " << DeviationsFromFileSensor2D::apply() << std::endl;
     if(ALIUtils::debug >= 4) {
       std::cout << "fdeviFromFile" << fdevi_from_file << std::endl;
       //-      std::cout << "deviFromFile" << deviFromFile << std::endl;
     }
     //--------- get measurement value of the current sensor
     std::vector< Measurement* >& measv = Model::MeasurementList();
     unsigned int ii;
     Measurement *omeas = 0;
     for( ii = 0; ii < measv.size(); ii++ ) {
       //-   std::cout << " sensor2d finding meas " <<  measv[ii]->sensorName() << " " << name() << std::endl;
       if( measv[ii]->sensorName() == name() ) {
     omeas = measv[ii];
     break;
       }
     }
     if( omeas == 0 ) {
       std::cerr << "!!!EXITING OptOSensor2D::fastTraversesLightRay: meas " << name() << " not found " << std::endl;
     }
 
     ALIdouble interslcx = omeas->value( 0 );
     ALIdouble interslcy = omeas->value( 1 );
     if(ALIUtils::debug >= 5) std::cout << " interslcx " << interslcx << " interslcy " << interslcy << std::endl;
     //----- transform in milimeters and positive
     //mum    interslcx = interslcx*1.E6 + 10000.;
     //mum    interslcy = interslcy*1.E6 + 10000.;
     ALIdouble df = ALIUtils::LengthValueDimensionFactor();
     interslcx = interslcx/df + 0.010/df;
     interslcy = interslcy/df + 0.010/df;
      if(ALIUtils::debug >= 5) std::cout << " interslcx " << interslcx << " interslcy " << interslcy << std::endl;
 
     //---------- Get deviations from file (they are in microrads)
     std::pair< ALIdouble, ALIdouble> devis = deviFromFile->getDevis( interslcx, interslcy );
     deviX = devis.second;
     deviY = -devis.first;
      // deviX = devis.first;
      //  deviY = devis.second;
     
     //o  deviX = *((deviFromFile->deviationsInX()).begin() + pointY*deviFromFile->nPoints() + pointX) * 1.E-6;;
     //o  deviY = *((deviFromFile->deviationsInY().begin()) + pointY*deviFromFile->nPoints() + pointX) * 1.E-6;
     
     //---------- Set this deviation value as original one, as it will not be changed for derivatives (change the entry and also the ExtraEntryValueOriginalList())
     ALIuint entryNo = extraEntryNo( "deviX" );
     if( verbose >= 3 ) std::cout << "entrynox" << entryNo << name() << verbose << std::endl;
     Entry* entryDeviX = *(ExtraEntryList().begin()+entryNo);
     entryDeviX->setValue( deviX );
     //-    std::vector< ALIdouble >::const_iterator eevolite = static_cast<std::vector< ALIdouble >::iterator>( ExtraEntryValueOriginalList().begin() );
     std::vector< ALIdouble > eevil = ExtraEntryValueOriginalList();
     //-    std::vector< ALIdouble >::const_iterator eevolite = ( ExtraEntryValueOriginalList().begin() );
     std::vector< ALIdouble >::iterator eevolite = eevil.begin();
 
     *(eevolite+entryNo) = deviX;
     if( verbose >= 3 ) std::cout<< " entryDeviX name " << entryDeviX->name() << entryDeviX->value() << std::endl;
     entryNo = extraEntryNo( "deviY" );
     Entry* entryDeviY = *(ExtraEntryList().begin()+entryNo);
     //- std::cout << "entrynoy" << entryNo << name() << std::endl;
     entryDeviY->setValue( deviY );
     *(eevolite+entryNo) = deviY;
     //-  std::cout<< entryDeviY << " entryDeviY name " << entryDeviY->name() << entryDeviY->value() << std::endl;
     
   } else {
     deviX = findExtraEntryValue("deviX");
     deviY = findExtraEntryValue("deviY");
 
     //??? why previous does not work??
     if( fdevi_from_file ) {
       if( ALIUtils::debug >= 5) std::cout << "fdeviFromFile" << fdevi_from_file << std::endl;
       ALIuint entryNo = extraEntryNo( "deviX" );
       Entry* entryDeviX = *(ExtraEntryList().begin()+entryNo);
      if( verbose >= 3 ) std::cout<< entryDeviX << " entryDeviX name " << entryDeviX->name() << entryDeviX->value() << std::endl;
       deviX = entryDeviX->value();
       entryNo = extraEntryNo( "deviY" );
       Entry* entryDeviY = *(ExtraEntryList().begin()+entryNo);
       if( verbose >= 3 )  std::cout<< entryDeviY << " entryDeviY name " << entryDeviY->name() << entryDeviY->value() << std::endl;
       deviY = entryDeviY->value();
 
     } else {
       ALIbool bb = findExtraEntryValueIfExists("devi", devi);
       if( bb ) {
     deviX = devi;
     deviY = devi;
       }
     }
   }
   if(ALIUtils::debug >= 4) {
     std::cout << "devi " << devi << " devi x  " << deviX << " devi y  " << deviY << std::endl;
   }
 
   lightray.setPoint( inters );
 
   lightray.shiftAndDeviateWhileTraversing( this, 'T' );
   if (ALIUtils::debug >= 2) {
     lightray.dumpData("Shifted and Deviated");
   }
 
 }      

void OptOSensor2D::fillExtraEntry ( std::vector< ALIstring > & wordlist )

virtual

Reimplemented from OpticalObject.

Definition at line 291 of file OptOSensor2D.cc.

References gather_cfg::cout, ALIUtils::debug, OpticalObject::fillExtraEntry(), ALIUtils::getFloat(), ALIFileIn::getInstance(), and ALIFileIn::getWordsInLine().

 {
 
   if(ALIUtils::debug >= 5) std::cout << "OptOSensor2D fillExtraEntry wordlist[1] " << wordlist[1] << std::endl;
   //---------- check if it is deviation read from file 
   fdevi_from_file = 0;
   //-  std::cout << "WL " << wordlist[1]<< "WL " << wordlist[2]<< "WL " << wordlist[3] << std::endl;
   if( wordlist[1] == ALIstring("devi") && wordlist[2] == ALIstring("from_file") ) {
     //---------- Open file
     ALIstring fnam;
     if( wordlist.size() >= 4) {
       fnam = wordlist[3];
     } else {
     //----- Build up file name if it does not exists
       fnam = "dat/devi-";
       fnam += shortName(); 
       fnam += ".dat";
     }
 
     ALIFileIn& ifdevi = ALIFileIn::getInstance( fnam );
 
     //----- Check that file exists 
     if(ALIUtils::debug >= 4) std::cout << "Opening deviation file: " << fnam << std::endl;
     /*-    if( !ifdevi ) {
       std::cerr << " !!! Sensor2D Deviation file not found: " << fnam << " of object " << name() << std::endl;
       exit(1);
       }*/
 
     deviFromFile = new DeviationsFromFileSensor2D();
     fdevi_from_file = 1;
     if(ALIUtils::debug >= 5 ) std::cout << "deviFromFile " << deviFromFile << std::endl; 
     //----- Read header
     ALIstring sensor1_name, sensor2_name;
     ALIdouble sensor_dist;
     ALIdouble prec_deviX,prec_deviY;
 
     std::vector<ALIstring> wl;
     ifdevi.getWordsInLine( wl );
     sensor1_name = wl[0];
     sensor2_name = wl[1];
     sensor_dist = atof( wl[2].c_str() );
     // 'c' means that light is traversing the glass
     if(sensor1_name[sensor1_name.size()-2] == 'c') {
       sensor1_name = sensor1_name.substr(0,sensor1_name.size()-1);
     }
     if(sensor2_name[sensor2_name.size()-2] == 'c') {
       sensor2_name = sensor2_name.substr(0,sensor2_name.size()-1);
     }
     if(ALIUtils::debug >= 5) std::cout << "sensor1_name " << sensor1_name << " sensor2_name " << sensor2_name  << " sensor_dist " << sensor_dist << " unknown " << wl[3] << std::endl;
 
     ifdevi.getWordsInLine( wl );
     prec_deviX = atof( wl[0].c_str() );
     prec_deviY = atof( wl[1].c_str() );
 
     if(ALIUtils::debug >= 5) std::cout << "prec_deviX " <<  prec_deviX  << " prec_deviY " << prec_deviY << std::endl;
 
     deviFromFile = new DeviationsFromFileSensor2D();
     ALIdouble offsetX, offsetY;
     if( wl.size() == 5 ) {
       offsetX = ALIUtils::getFloat( wl[3] );
       offsetY = ALIUtils::getFloat( wl[4] );
       deviFromFile->setOffset( offsetX, offsetY );
     }
     deviFromFile->readFile( ifdevi );
     fdevi_from_file = 1;
     if(ALIUtils::debug >= 5 ) std::cout << "deviFromFile " << deviFromFile << std::endl; 
 
  
     //--- Fill extra entries 'deviX' & 'deviY' to compute derivatives 
     std::vector<ALIstring> wlo; 
     char chartmp[20];
     wlo.push_back( wordlist[0] );
     wlo.push_back("deviX");
     wlo.push_back("0"); // value is set to 0 as it is on the file and the point of intersection is not computed yet
     gcvt( prec_deviX, 10, chartmp );
     wlo.push_back( ALIstring(chartmp) );
     wlo.push_back("cal");
     std::vector<ALIstring> wl2(wlo); 
     OpticalObject::fillExtraEntry( wlo );
 
     wl2[1] = "deviY";   
     gcvt( prec_deviY, 10, chartmp );
     wl2[3] = ALIstring( chartmp );
     OpticalObject::fillExtraEntry( wl2 ); 
 
   } else {
     OpticalObject::fillExtraEntry( wordlist );
   }
 }

void OptOSensor2D::makeMeasurement	(	LightRay &	lightray,
		Measurement &	meas
	)

virtual

Reimplemented from OpticalObject.

Definition at line 42 of file OptOSensor2D.cc.

References gather_cfg::cout, ALIUtils::debug, LightRay::direction(), ALIUtils::dump3v(), alignCSCRings::e, LightRay::intersect(), mergeVDriftHistosByStation::name, dbtoconf::parent, LightRay::point(), Measurement::setLightRayDirection(), Measurement::setLightRayPosition(), Measurement::setValueSimulated(), Measurement::value(), Measurement::valueSimulated(), and Measurement::valueType().

 {
   //---------- check is last and not the only one
   /*    if( vocite - OptOList().begin() == 0 ||
     OptOList().end() - vocite != 1) {
     std::cerr << " last and not only one Optical Object should be 'sensor2D' (unless you specify (:T)raverse) " <<
     OptOList().end() - vocite << " size " <<OptOList().size() << std::endl;
     DumpBadOrderOptOs(); 
     }*/
 
   //---------- Get simulated value 
   //---------- Get intersection
   CLHEP::Hep3Vector ZAxis(0.,0,1.);
   CLHEP::HepRotation rmt = rmGlob();
   ZAxis = rmt * ZAxis;
   if( ALIUtils::debug >= 4 ) {
     ALIUtils::dump3v( centreGlob(), " sensor2D centre Glob ");
     ALIUtils::dump3v( ZAxis, " snsor2D normal ");
   }
   //-  ALIUtils::dumprm( rmt, "rot global " );
   lightray.intersect( ALIPlane(centreGlob(), ZAxis) );
   CLHEP::Hep3Vector inters = lightray.point();
   
   ALIdouble* interslc;
   interslc = convertPointToLocalCoordinates( inters );
   ALIdouble interslcx = interslc[0];
   ALIdouble interslcy = interslc[1];
   meas.setValueSimulated( 0, interslcx );
   meas.setValueSimulated( 1, interslcy );
   
   //----- Dump info
   if (ALIUtils::debug >= 2) {
     //--- Special for range studies
     ALIstring chrg = "";
     /*t    if(Model::Ncmslinkrange >= 1 && Model::Ncmslinkrange <= 8 ) {
       chrg = "RG";
     } else {
       chrg = "";
       } t*/
     CLHEP::Hep3Vector measvv( meas.value()[0], meas.value()[1], 0.);
     measvv = rmt*measvv;
     ALIUtils::dump3v( measvv, " $$$$$$MEAS IN LOCAL FRAME");
     ALIUtils::dump3v( measvv+centreGlob(), " $$$$$$MEAS IN GLOBAL FRAME");
 
     ALIdouble detH =  1000*meas.valueSimulated(0); if(fabs(detH) <= 1.e-9 ) detH = 0.;
     ALIdouble detV =  1000*meas.valueSimulated(1); if(fabs(detV) <= 1.e-9 ) detV = 0.;
     std::cout << "REAL value: " << chrg << meas.valueType(0) << ": " << 1000*meas.value()[0] << chrg << " " << meas.valueType(1) << ": " << 1000*meas.value()[1]  << " (mm)  " << (this)->name() 
      << "   DIFF= " << detH-1000*meas.value()[0] << " " << detV-1000*meas.value()[1] << std::endl;
     std::cout << "SIMU value: " << chrg << " " << meas.valueType(0) << ": "
       // << setprecision(3) << setw(4)
           << detH 
           << chrg << " " << meas.valueType(1) << ": " << detV 
           << " (mm)  " << (this)->name() << std::endl;
     /*-    std::cout << "SIMU value: " << chrg << " " << meas.valueType(0) << ": "
       // << setprecision(3) << setw(4)
               << detH / 0.3125
           << chrg << " " << meas.valueType(1) << ": " << detV / 0.3125
           << " STRIPS  " << (this)->name() << std::endl; */
     //   << detH 
     //   << chrg << " V: " << detV 
     //   << " (mm)  " << (this)->name() << std::endl;
     ALIUtils::dump3v( 1000.*(inters - parent()->centreGlob()) , " $$$$$$SIMU inters - parent centre");
     ALIUtils::dump3v(  1000.*(inters - centreGlob()) , " $$$$$$SIMU inters - centre");
   }
   //t    delete &lightray;    
   
   // store the lightray position and direction
   meas.setLightRayPosition( lightray.point() );
   meas.setLightRayDirection( lightray.direction() );
 
   delete[] interslc;
 }

Member Data Documentation

DeviationsFromFileSensor2D* OptOSensor2D::deviFromFile

private

Definition at line 52 of file OptOSensor2D.h.

ALIbool OptOSensor2D::fdevi_from_file

private

Definition at line 53 of file OptOSensor2D.h.

Public Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation