#include <EcalSRSettings.h>

Public Member Functions
	EcalSRSettings ()

virtual	~EcalSRSettings ()

Public Attributes
std::vector< int >	actions_

int	automaticMasks_

int	automaticSrpSelect_

short	bxGlobalOffset_

std::vector< short >	bxOffsets_

std::vector< short >	dccMasks_

std::vector< std::vector< float > >	dccNormalizedWeights_

std::vector< int >	deltaEta_

std::vector< int >	deltaPhi_

float	ebDccAdcToGeV_
	ADC to GeV conversion factor used in ZS filter for EB. More...

std::vector< int >	ecalDccZs1stSample_

float	eeDccAdcToGeV_
	ADC to GeV conversion factor used in ZS filter for EE. More...

std::vector< short >	srfMasks_

std::vector< float >	srpHighInterestChannelZS_

std::vector< float >	srpLowInterestChannelZS_

std::vector< std::vector< short > >	srpMasksFromConfig_

std::vector< std::vector< short > >	substitutionSrfs_

std::vector< int >	symetricZS_

std::vector< short >	tccMasksFromConfig_


std::vector< int >	testerTccEmuSrpIds_

std::vector< int >	testerSrpEmuSrpIds_

std::vector< int >	testerDccTestSrpIds_

std::vector< int >	testerSrpTestSrpIds_

Static Public Attributes
static const int	nDccs_ = 54

static const int	nSrps_ = 12

static const int	nTccs_ = 108

Detailed Description

Class to hold ECAL Selective readout settings. Up to CMSSW release 3.8.X, selective readout emulation settings was done from CMSSW configuration file. From 3.8.X configuration is stored in condition database. Support for configuration from CMSSW configuration file is maintained, for backward compatibility and to provide an easy way to change settings for studies dedicated to seletive readout. The same object is used to stored the online setting of real data.

Tools to manipulate this object can be found in class EcalSRCondTools of package SimCalorimetry/EcalSelectiveReadoutProducer.

Definition at line 27 of file EcalSRSettings.h.

Constructor & Destructor Documentation

EcalSRSettings::EcalSRSettings ( )

Constructs an EcalSRSettings

Definition at line 12 of file EcalSRSettings.cc.

                               :
   ebDccAdcToGeV_(0.),
   eeDccAdcToGeV_(0.),
   bxGlobalOffset_(0),
   automaticMasks_(0),
   automaticSrpSelect_(0)
 {}

virtual EcalSRSettings::~EcalSRSettings ( )

inlinevirtual

Destructor

Definition at line 37 of file EcalSRSettings.h.

37 {};

Member Data Documentation

std::vector<int> EcalSRSettings::actions_

SR->action flag map. 4 elements action_[i]: action for flag value i

Definition at line 168 of file EcalSRSettings.h.

Referenced by popcon::EcalSRPHandler::ChangePayload(), EcalSelectiveReadoutSuppressor::EcalSelectiveReadoutSuppressor(), popcon::EcalSRPHandler::getNewObjects(), EcalSRCondTools::importParameterSet(), EcalSRCondTools::importSrpConfigFile(), and popcon::EcalSRPHandler::PrintPayload().

int EcalSRSettings::automaticMasks_

Switch for automatic channel masking. 0: disabled; 1: enabled. Standard configuration: 1. When enabled, if a FED is excluded from the run, the corresponding TCC inputs is automatically masked (overwrites the tccInputMasks).

Definition at line 213 of file EcalSRSettings.h.

Referenced by EcalSRCondTools::analyze(), popcon::EcalSRPHandler::ChangePayload(), popcon::EcalSRPHandler::getNewObjects(), EcalSRCondTools::importSrpConfigFile(), and popcon::EcalSRPHandler::PrintPayload().

int EcalSRSettings::automaticSrpSelect_

Switch for automatic SRP card selection. 0: disabled; 1 : enabled.. When enabled, if all the FEDs corresponding to a given SRP is excluded from the run, Then the corresponding SRP card is automatically excluded.

Definition at line 218 of file EcalSRSettings.h.

Referenced by EcalSRCondTools::analyze(), popcon::EcalSRPHandler::ChangePayload(), popcon::EcalSRPHandler::getNewObjects(), EcalSRCondTools::importSrpConfigFile(), and popcon::EcalSRPHandler::PrintPayload().

short EcalSRSettings::bxGlobalOffset_

SRP system bunch crossing counter offset. For each card the bxOffseti

Definition at line 208 of file EcalSRSettings.h.

Referenced by EcalSRCondTools::analyze(), popcon::EcalSRPHandler::ChangePayload(), popcon::EcalSRPHandler::getNewObjects(), and popcon::EcalSRPHandler::PrintPayload().

std::vector<short> EcalSRSettings::bxOffsets_

Per SRP card bunch crossing counter offset. This offset is added to the bxGlobalOffset 12 elements: index = (SRP ID - 1)

Definition at line 203 of file EcalSRSettings.h.

Referenced by popcon::EcalSRPHandler::ChangePayload(), popcon::EcalSRPHandler::getNewObjects(), EcalSRCondTools::importSrpConfigFile(), and popcon::EcalSRPHandler::PrintPayload().

std::vector<short> EcalSRSettings::dccMasks_

Masks for DCC output of SRP cards One element per DCC, that is 54 elements: element i applies to DCC (i+1)

Definition at line 181 of file EcalSRSettings.h.

Referenced by popcon::EcalSRPHandler::ChangePayload(), popcon::EcalSRPHandler::getNewObjects(), EcalSRCondTools::importSrpConfigFile(), and popcon::EcalSRPHandler::PrintPayload().

std::vector<std::vector<float> > EcalSRSettings::dccNormalizedWeights_

DCC ZS FIR weights: weights are rounded in such way that in Hw representation (weigth*1024 rounded to nearest integer) the sum is null: Each element is a vector of 6 values, the 6 weights If the vector contains... ... 1 element, then the weight set applies to whole ECAL ... 2 elements, then element 0 applies to EB, element 1 to EE ... 54 elements, then element i applied to DCC (i+1) (FED ID 651+i) ... 75848 elements, then: for i < 61200, element i applies to EB crystal with denseIndex i (see EBDetId::denseIndex()) for i >= 61200, element i applies to EE crystal with denseIndex (i+61200) (see EBDetId::denseIndex())

Definition at line 99 of file EcalSRSettings.h.

Referenced by EBSelectiveReadoutTask::beginRun(), EESelectiveReadoutTask::beginRun(), popcon::EcalSRPHandler::ChangePayload(), EcalSelectiveReadoutProducer::checkValidity(), EcalSelectiveReadoutProducer::checkWeights(), EcalSelectiveReadoutSuppressor::EcalSelectiveReadoutSuppressor(), popcon::EcalSRPHandler::getNewObjects(), popcon::EcalSRPHandler::importDccConfigFile(), EcalSRCondTools::importParameterSet(), and popcon::EcalSRPHandler::PrintPayload().

std::vector<int> EcalSRSettings::deltaEta_

Neighbour eta range, neighborhood: (2*deltaEta+1)*(2*deltaPhi+1) In the vector contains:

1 element, then value applies to whole ECAL
2 elements, then element 0 applies to EB, element 1 to EE
12 elements, then element i applied to SRP (i+1) SRP emulation (see SimCalorimetry/EcalSelectiveReadoutProcuders) supports only 1 element mode.

Definition at line 58 of file EcalSRSettings.h.

Referenced by popcon::EcalSRPHandler::ChangePayload(), EcalSelectiveReadoutSuppressor::EcalSelectiveReadoutSuppressor(), popcon::EcalSRPHandler::getNewObjects(), EcalSRCondTools::importParameterSet(), EcalSRCondTools::importSrpConfigFile(), and popcon::EcalSRPHandler::PrintPayload().

std::vector<int> EcalSRSettings::deltaPhi_

Neighbouring eta range, neighborhood: (2*deltaEta+1)*(2*deltaPhi+1) If the vector contains... ... 1 element, then value applies to whole ECAL ... 2 elements, then element 0 applies to EB, element 1 to EE ... 12 elements, then element i applied to SRP (i+1) If the vector contains... ... 1 element, then value applies to whole ECAL ... 2 elements, then element 0 applies to EB, element 1 to EE ... 12 elements, then element i applied to SRP (i+1) SRP emulation (see SimCalorimetry/EcalSelectiveReadoutProcuders) supports only the single-element mode.

Definition at line 71 of file EcalSRSettings.h.

Referenced by popcon::EcalSRPHandler::ChangePayload(), EcalSelectiveReadoutSuppressor::EcalSelectiveReadoutSuppressor(), popcon::EcalSRPHandler::getNewObjects(), EcalSRCondTools::importParameterSet(), EcalSRCondTools::importSrpConfigFile(), and popcon::EcalSRPHandler::PrintPayload().

float EcalSRSettings::ebDccAdcToGeV_

ADC to GeV conversion factor used in ZS filter for EB.

Definition at line 83 of file EcalSRSettings.h.

Referenced by popcon::EcalSRPHandler::ChangePayload(), EcalSelectiveReadoutSuppressor::EcalSelectiveReadoutSuppressor(), popcon::EcalSRPHandler::getNewObjects(), EcalSRCondTools::importParameterSet(), and popcon::EcalSRPHandler::PrintPayload().

std::vector<int> EcalSRSettings::ecalDccZs1stSample_

Index of time sample (staring from 1) the first DCC weights is implied If the vector contains: ... 1 element, then value applies to whole ECAL ... 2 elements, then element 0 applies to EB, element 1 to EE ... 54 elements, then element i applied to DCC (i+1) (FED ID 651+i) SRP emulation (see SimCalorimetry/EcalSelectiveReadoutProcuders) supports only the single-element mode.

Definition at line 80 of file EcalSRSettings.h.

Referenced by popcon::EcalSRPHandler::ChangePayload(), EcalSelectiveReadoutProducer::checkValidity(), EcalSelectiveReadoutProducer::checkWeights(), EcalSelectiveReadoutSuppressor::EcalSelectiveReadoutSuppressor(), popcon::EcalSRPHandler::getNewObjects(), popcon::EcalSRPHandler::importDccConfigFile(), EcalSRCondTools::importParameterSet(), and popcon::EcalSRPHandler::PrintPayload().

float EcalSRSettings::eeDccAdcToGeV_

ADC to GeV conversion factor used in ZS filter for EE.

Definition at line 85 of file EcalSRSettings.h.

Referenced by popcon::EcalSRPHandler::ChangePayload(), EcalSelectiveReadoutSuppressor::EcalSelectiveReadoutSuppressor(), popcon::EcalSRPHandler::getNewObjects(), EcalSRCondTools::importParameterSet(), and popcon::EcalSRPHandler::PrintPayload().

const int EcalSRSettings::nDccs_ = 54

static

Definition at line 48 of file EcalSRSettings.h.

Referenced by EcalSRCondTools::importSrpConfigFile().

const int EcalSRSettings::nSrps_ = 12

static

Definition at line 47 of file EcalSRSettings.h.

Referenced by EcalSRCondTools::importSrpConfigFile().

const int EcalSRSettings::nTccs_ = 108

static

Definition at line 49 of file EcalSRSettings.h.

Referenced by EcalSRCondTools::importSrpConfigFile().

std::vector<short> EcalSRSettings::srfMasks_

Mask to enable pattern test. Typical value: 0. One element per SRP, that is 12 elements: element i applies to SRP (i+1)

Definition at line 185 of file EcalSRSettings.h.

Referenced by popcon::EcalSRPHandler::ChangePayload(), popcon::EcalSRPHandler::getNewObjects(), EcalSRCondTools::importSrpConfigFile(), and popcon::EcalSRPHandler::PrintPayload().

std::vector<float> EcalSRSettings::srpHighInterestChannelZS_

ZS energy threshold in GeV to apply to high interest channels of endcap If the vector contains... ... 1 element, then the weight set applies to whole ECAL ... 2 elements, then element 0 applies to EB, element 1 to EE ... 54 elements, then element i applied to DCC (i+1) (FED ID 651+i) SRP emulation supports only the 2-element mode. Corresponds to srpBarrelLowInterestChannelZS and srpEndcapLowInterestChannelZS of python configuration file parameters

Definition at line 131 of file EcalSRSettings.h.

Referenced by popcon::EcalSRPHandler::ChangePayload(), EcalSelectiveReadoutSuppressor::EcalSelectiveReadoutSuppressor(), popcon::EcalSRPHandler::getNewObjects(), popcon::EcalSRPHandler::importDccConfigFile(), EcalSRCondTools::importParameterSet(), and popcon::EcalSRPHandler::PrintPayload().

std::vector<float> EcalSRSettings::srpLowInterestChannelZS_

ZS energy threshold in GeV to apply to low interest channels of barrel If the vector contains... ... 1 element, then the weight set applies to whole ECAL ... 2 elements, then element 0 applies to EB, element 1 to EE ... 54 elements, then element i applied to DCC (i+1) (FED ID 651+i) SRP emulation supports only the 2-element mode. Corresponds to srpBarrelLowInterestChannelZS and srpEndcapLowInterestChannelZS of python configuration file parameters

Definition at line 121 of file EcalSRSettings.h.

Referenced by popcon::EcalSRPHandler::ChangePayload(), EcalSelectiveReadoutSuppressor::EcalSelectiveReadoutSuppressor(), popcon::EcalSRPHandler::getNewObjects(), popcon::EcalSRPHandler::importDccConfigFile(), EcalSRCondTools::importParameterSet(), and popcon::EcalSRPHandler::PrintPayload().

std::vector<std::vector<short> > EcalSRSettings::srpMasksFromConfig_

Masks for SRP-SRP inputs of SRP cards One element per SRP, that is 12 elements: element i applies to SRP (i+1)

Definition at line 177 of file EcalSRSettings.h.

Referenced by popcon::EcalSRPHandler::ChangePayload(), popcon::EcalSRPHandler::getNewObjects(), EcalSRCondTools::importSrpConfigFile(), and popcon::EcalSRPHandler::PrintPayload().

std::vector<std::vector<short> > EcalSRSettings::substitutionSrfs_

Substitution flags used in patterm mode indices [iSrp][iFlag]

Definition at line 189 of file EcalSRSettings.h.

Referenced by popcon::EcalSRPHandler::ChangePayload(), popcon::EcalSRPHandler::getNewObjects(), EcalSRCondTools::importSrpConfigFile(), and popcon::EcalSRPHandler::PrintPayload().

std::vector<int> EcalSRSettings::symetricZS_

Switch to use a symetric zero suppression (cut on absolute value). For studies only, for time being it is not supported by the hardware. having troubles for vector<bool> with coral (3.8.0pre1), using vector<int> instead, 0 means false, a value different than 0 means true. If the vector contains... ... 1 element, then the weight set applies to whole ECAL ... 2 elements, then element 0 applies to EB, element 1 to EE ... 54 elements, then element i applied to DCC (i+1) (FED ID 651+i) SRP emulation supports only 1 element mode. Hardware does not support the symetric ZS, so symetricZS = 0 for real data.

Definition at line 111 of file EcalSRSettings.h.

Referenced by popcon::EcalSRPHandler::ChangePayload(), EcalSelectiveReadoutSuppressor::EcalSelectiveReadoutSuppressor(), popcon::EcalSRPHandler::getNewObjects(), EcalSRCondTools::importParameterSet(), and popcon::EcalSRPHandler::PrintPayload().

std::vector<short> EcalSRSettings::tccMasksFromConfig_

Masks for TTC inputs of SRP cards One element per TCC, that is 108 elements: element i applies to TCC (i+1)

Definition at line 172 of file EcalSRSettings.h.

Referenced by popcon::EcalSRPHandler::ChangePayload(), popcon::EcalSRPHandler::getNewObjects(), EcalSRCondTools::importSrpConfigFile(), and popcon::EcalSRPHandler::PrintPayload().

std::vector<int> EcalSRSettings::testerDccTestSrpIds_

Definition at line 196 of file EcalSRSettings.h.

Referenced by popcon::EcalSRPHandler::ChangePayload(), popcon::EcalSRPHandler::getNewObjects(), EcalSRCondTools::importSrpConfigFile(), and popcon::EcalSRPHandler::PrintPayload().

std::vector<int> EcalSRSettings::testerSrpEmuSrpIds_

Definition at line 195 of file EcalSRSettings.h.

Referenced by popcon::EcalSRPHandler::ChangePayload(), popcon::EcalSRPHandler::getNewObjects(), EcalSRCondTools::importSrpConfigFile(), and popcon::EcalSRPHandler::PrintPayload().