Measurement Class Reference

#include <Measurement.h>

Inheritance diagram for Measurement:

Public Member Functions
void	addAffectingEntriesFromOptO (const OpticalObject *optoP)
void	AddOptOListItem (OpticalObject *opto)
void	AddOptONameListItem (ALIstring optos)
const std::vector< Entry * > &	affectingEntryList () const
void	buildAffectingEntryList ()
void	buildOptOList ()
virtual void	buildOptONamesList (const std::vector< ALIstring > &wl)
void	calculateOriginalSimulatedValue ()
virtual void	calculateSimulatedValue (ALIbool firstTime)
void	construct ()
void	constructFromOA (OpticalAlignMeasurementInfo &measInfo)
void	copyMeas (Measurement *meas, const std::string &subsstr1, const std::string &subsstr2)
virtual void	correctValueAndSigma ()
std::vector< ALIdouble >	DerivativeRespectEntry (Entry *entry)
const ALIuint	dim () const
void	DumpBadOrderOptOs ()
void	fillData (ALIuint coor, const std::vector< ALIstring > &wl)
void	fillData (ALIuint coor, OpticalAlignParam *oaParam)
const CLHEP::Hep3Vector &	getLightRayDirection () const
const CLHEP::Hep3Vector &	getLightRayPosition () const
ALIstring	getMeasuringBehaviour (const std::vector< OpticalObject * >::const_iterator vocite)
const OpticalObject *	getPreviousOptO (const OpticalObject *Popto) const
	Measurement (const ALIint measdim, ALIstring &type, ALIstring &name)
	Measurement ()
const ALIstring &	name () const
std::vector< OpticalObject * > &	OptOList ()
const std::vector< ALIstring > &	OptONameList () const
void	postConstruct ()
const ALIstring &	sensorName ()
virtual void	setConversionFactor (const std::vector< ALIstring > &wordlist)
void	SetDimension (ALIuint dim)
void	setLightRayDirection (const CLHEP::Hep3Vector &lightRayDirection)
void	setLightRayPosition (const CLHEP::Hep3Vector &lightRayPosition)
void	setName ()
void	setSigma (ALIint coor, ALIdouble val)
void	setType (ALIstring type)
void	setValue (ALIint coor, ALIdouble val)
void	setValueSimulated (ALIint coor, ALIdouble value)
void	setValueSimulated_orig (ALIint coor, ALIdouble value)
virtual void	setXlaserLine (ALIuint ii, int val)
const ALIdouble *	sigma () const
const ALIdouble	sigma (ALIuint ii) const
virtual const ALIdouble	sigmaDimensionFactor () const
const ALIstring &	type () const
const ALIdouble *	value () const
const ALIdouble	value (ALIuint ii) const
virtual const ALIdouble	valueDimensionFactor () const
bool	valueIsSimulated (ALIint coor)
const ALIdouble	valueSimulated (ALIuint ii) const
const ALIdouble	valueSimulated_orig (ALIuint ii) const
const ALIstring	valueType (ALIuint ii) const
virtual int	xlaserLine (ALIuint ii)
virtual	~Measurement ()

Static Public Member Functions
static ALIstring	getCurrentDate ()
static ALIstring	getCurrentTime ()
static ALIstring &	measurementsFileName ()
static void	setCurrentDate (const std::vector< ALIstring > &wl)
	set the date of the current measurement More...
static void	setMeasurementsFileName (const ALIstring &filename)

Static Public Attributes
static ALIdouble	cameraScaleFactor = 1.
static ALIbool	only1 = 0
static ALIstring	only1Date = ""
static ALIstring	only1Time = ""

Protected Member Functions
void	printStartCalculateSimulatedValue (const Measurement *meas)
void	Substitute2p (ALIstring &ref, const ALIstring &firstref, int NtwoPoints)

Private Attributes
std::vector< OpticalObject * >	_OptOList
std::vector< ALIstring >	_OptONameList
std::vector< Entry * >	theAffectingEntryList
ALIuint	theDim
CLHEP::Hep3Vector	theLightRayDirection
CLHEP::Hep3Vector	theLightRayPosition
ALIstring	theName
ALIdouble *	theSigma
ALIstring	theType
ALIdouble *	theValue
ALIbool *	theValueIsSimulated
ALIdouble *	theValueSimulated
ALIdouble *	theValueSimulated_orig
ALIstring *	theValueType

Static Private Attributes
static ALIstring	theCurrentDate = "99/99/99"
static ALIstring	theCurrentTime = "99:99"
static ALIstring	theMeasurementsFileName = ""

Detailed Description

Definition at line 27 of file Measurement.h.

Constructor & Destructor Documentation

Measurement::Measurement	(	const ALIint	measdim,
		ALIstring &	type,
		ALIstring &	name
	)

Definition at line 44 of file Measurement.cc.

References theDim, theSigma, theValue, theValueIsSimulated, theValueSimulated, theValueSimulated_orig, and theValueType.

: theDim(measdim), theType(type), theName( name )
{
  //  _OptOnames = new ALIstring[theDim];
  theValue = new ALIdouble[theDim];
  theSigma = new ALIdouble[theDim];
  theValueType = new ALIstring[theDim];

  theValueSimulated = new ALIdouble[theDim];
  theValueSimulated_orig = new ALIdouble[theDim];
  theValueIsSimulated = new ALIbool[theDim];

}

Measurement::Measurement ( )

inline

Definition at line 32 of file Measurement.h.

{ };   

Measurement::~Measurement ( )

virtual

Definition at line 579 of file Measurement.cc.

References theSigma, and theValue.

{
  //  delete[] _name; 
  delete[] theValue;
  delete[] theSigma;

}

Member Function Documentation

void Measurement::addAffectingEntriesFromOptO

(

const OpticalObject *

optoP

)

Definition at line 389 of file Measurement.cc.

References OpticalObject::CoordinateEntryList(), gather_cfg::cout, ALIUtils::debug, OpticalObject::ExtraEntryList(), spr::find(), OpticalObject::name(), OpticalObject::parent(), and theAffectingEntryList.

Referenced by buildAffectingEntryList().

{
  if(ALIUtils::debug >= 3)  std::cout << "Measurement::addAffectingEntriesFromOptO: OptO taking part in Measurement: " << optoP->name() << std::endl;
      //---------- Loop entries in this OptO           
  std::vector< Entry* >::const_iterator vecite;
  std::vector< Entry* >::const_iterator fvecite;
  for (vecite = optoP->CoordinateEntryList().begin();
      vecite != optoP->CoordinateEntryList().end(); vecite++) {
    //T     if( find( theAffectingEntryList.begin(), theAffectingEntryList.end(), (*vecite) ) == theAffectingEntryList.end() ){
    //t      theAffectingEntryList.push_back(*vecite);
    //T    }
    fvecite = find( theAffectingEntryList.begin(), theAffectingEntryList.end(), (*vecite) );
    if (fvecite == theAffectingEntryList.end() ){
      theAffectingEntryList.push_back(*vecite);
      if(ALIUtils::debug >= 4)  std::cout << "Entry that may affect Measurement: " << (*vecite)->name() << std::endl;
    }
  }
  for (vecite = optoP->ExtraEntryList().begin();
      vecite != optoP->ExtraEntryList().end(); vecite++) {
    fvecite = find( theAffectingEntryList.begin(), theAffectingEntryList.end(), (*vecite) );
    if (fvecite == theAffectingEntryList.end() ){
      theAffectingEntryList.push_back(*vecite);
      if(ALIUtils::debug >= 4)  std::cout << "Entry that may affect Measurement: " << (*vecite)->name() << std::endl;
    }
  }
  if(optoP->parent() != 0) {
    addAffectingEntriesFromOptO( optoP->parent() );
  }
}

void Measurement::AddOptOListItem ( OpticalObject *  opto )

inline

Definition at line 188 of file Measurement.h.

References _OptOList.

                                            {
      _OptOList.push_back( opto );
  }

void Measurement::AddOptONameListItem ( ALIstring  optos )

inline

Definition at line 184 of file Measurement.h.

References _OptONameList.

Referenced by MeasurementDiffEntry::buildOptONamesList().

                                            {
      _OptONameList.push_back( optos );
  }

const std::vector<Entry*>& Measurement::affectingEntryList ( ) const

inline

Definition at line 113 of file Measurement.h.

References theAffectingEntryList.

                                                      {
    return theAffectingEntryList;
  }

void Measurement::buildAffectingEntryList

(

)

Definition at line 374 of file Measurement.cc.

References _OptOList, and addAffectingEntriesFromOptO().

Referenced by postConstruct().

                                         {
  
  //---------- Loop OptO MeasuredList
  std::vector< OpticalObject* >::const_iterator vocite;
  for (vocite = _OptOList.begin();
       vocite != _OptOList.end(); vocite++) {
      addAffectingEntriesFromOptO( *vocite );
  }
}

void Measurement::buildOptOList

(

)

Definition at line 316 of file Measurement.cc.

References _OptOList, _OptONameList, dtNoiseDBValidation_cfg::cerr, gather_cfg::cout, ALIUtils::debug, cmsRelvalreport::exit, Model::getOptOByName(), OpticalObject::name(), and Substitute2p().

Referenced by postConstruct().

{
  //-  if ( ALIUtils::debug >= 3 ) std::cout << std::endl << " MEASUREMENT: " << " " << this->name() << std::endl; 
  ALIstring twopoints(".."); // .. goes one level up in the tree fo OptOs

//---------------------------------------- Loop OptONameList
  std::vector<ALIstring>::iterator vsite;
  for (vsite = _OptONameList.begin();
       vsite != _OptONameList.end(); vsite++) {
//----------------------------------- Count how many '..' there are in the name
    ALIuint ii = 0;
    //    ALIuint slen = (*vsite).length();
    ALIuint Ntwopoints = 0;    //---- No '..' in ALIstring
    for(;;) {
      int i2p = (*vsite).find_first_of( twopoints, 3*ii ); // if it is ., it also finds it!!!
      if ( i2p < 0 ) break;
      if ( i2p != ALIint(3*ii)) {
    std::cerr << i2p << "!!! Bad position of '..' in reference ALIstring: " 
         << (*vsite).c_str() << std::endl; 
    exit(2);
      } else {
    Ntwopoints++;
    if ( ALIUtils::debug >=9 ) std::cout << "N2p" << Ntwopoints;
      }
      ii++;   
    }     
    //------ Substitute '..' by reference (the last OptO in list)
    if (Ntwopoints != 0) {
      Substitute2p( (*vsite), *(_OptONameList.end()-1), Ntwopoints);
    }
    //----- Get OpticalObject* that correspond to ALIstring and fill list
    ALIstring referenceOptO = (*vsite);
    //--- a ':' is used in OptOs that have several possible behavious
    ALIint colon = referenceOptO.find(':');
    if ( colon != -1 ) {
      if (ALIUtils::debug >=99) { 
    std::cout << "colon in reference OptO name " << colon << 
      referenceOptO.c_str() << std::endl;
      }
      referenceOptO = referenceOptO.substr( 0, colon );
    }
    OpticalObject* OptOitem = Model::getOptOByName( referenceOptO );
    if ( ALIUtils::debug >= 3 ) std::cout << "Measurement::buildOptOList: OptO in Measurement: " << OptOitem->name() << std::endl;
    if ( OptOitem != (OpticalObject*)0 ) {
      _OptOList.push_back( OptOitem);
    } else {
      std::cerr << "!!! Error in Measurement: can't find Optical Object " <<
    (*vsite).c_str() << std::endl;
      exit(2);
    }      
  }
}

void Measurement::buildOptONamesList ( const std::vector< ALIstring > &  wl )

virtual

Reimplemented in MeasurementDiffEntry.

Definition at line 177 of file Measurement.cc.

References _OptONameList, dtNoiseDBValidation_cfg::cerr, and cmsRelvalreport::exit.

Referenced by construct(), constructFromOA(), and copyMeas().

{

  int NPairs = (wl.size()+1)/2;   // Number of OptO names ( pair of name and '&' )

  //--------- Fill list with names 
  for ( int ii=0; ii<NPairs; ii++ ) {
    _OptONameList.push_back( wl[ii*2] );
    // Check for separating '&'
    if (ii != NPairs-1 && wl[2*ii+1] != ALIstring("&") ) {
      //      ALIFileIn::getInstance( Model::SDFName() ).ErrorInLine();
      std::cerr << "!!! Measured Optical Objects should be separated by '&', not by" 
        << wl[2*ii+1] << std::endl; 
      exit(2);
    }
  }
 
}

void Measurement::calculateOriginalSimulatedValue

(

)

Definition at line 452 of file Measurement.cc.

References calculateSimulatedValue(), gather_cfg::cout, ALIUtils::debug, dim(), ALIUtils::getFirstTime(), GlobalOptionMgr::getInstance(), GlobalOptionMgr::GlobalOptions(), setValue(), setValueSimulated_orig(), valueIsSimulated(), and valueSimulated().

{
  //----------  Calculate the simulated value of the Measurement
  calculateSimulatedValue( 1 );

#ifdef COCOA_VIS
  if( ALIUtils::getFirstTime() ) {
    GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
    if(gomgr->GlobalOptions()["VisWriteVRML"] > 1) {
      ALIVRMLMgr::getInstance().newLightRay();
    }
    /*-    if(Model::GlobalOptions()["VisWriteIguana"] > 1) {
           IgCocoaFileMgr::getInstance().newLightPath( theName );
       } */
  }
#endif

  //---------- Set original simulated values to it
  //-  if(ALIUtils::debug >= 5) std::cout << "MEAS DIMENSION" << dim() << std::endl;
  for ( ALIuint ii = 0; ii < dim(); ii++) {
    setValueSimulated_orig( ii, valueSimulated(ii) );
    if ( ALIUtils::debug >= 4 ) std::cout << "SETsimuvalOriginal" << valueSimulated(ii) << std::endl;
    //----- If Measurement has as value 'simulated_value', set the value to the simulated one
    if( valueIsSimulated(ii) == 1 ){
      setValue( ii, valueSimulated(ii) );
      //- std::cout << ii << " setting value as simulated " <<  valueSimulated(ii) << " " << value(ii) << this << std::endl;
    }
  }
 
}

virtual void Measurement::calculateSimulatedValue ( ALIbool  firstTime )

inlinevirtual

Reimplemented in MeasurementDiffEntry, MeasurementCOPS, MeasurementDistancemeter, MeasurementDistancemeter3dim, MeasurementTiltmeter, and MeasurementSensor2D.

Definition at line 51 of file Measurement.h.

Referenced by calculateOriginalSimulatedValue(), and DerivativeRespectEntry().

{};

void Measurement::construct

(

)

Definition at line 62 of file Measurement.cc.

References buildOptONamesList(), filterCSVwithJSON::copy, correctValueAndSigma(), gather_cfg::cout, ALIUtils::debug, dim(), fillData(), ALIFileIn::getInstance(), ALIFileIn::getWordsInLine(), name(), postConstruct(), Model::SDFName(), type(), and valueIsSimulated().

Referenced by Model::readSystemDescription().

{

  ALIFileIn& filein = ALIFileIn::getInstance( Model::SDFName() );

  //---------- Read OptOs that take part in this Measurement
  std::vector<ALIstring> wordlist;
  filein.getWordsInLine( wordlist );

  //--------- Fill the list of names of OptOs that take part in this measurement ( names only )
  buildOptONamesList( wordlist );
  
  if(ALIUtils::debug >= 3) {
    std::cout << "@@@@ Reading Measurement " << name() << " TYPE= " << type() << std::endl
          << " MEASURED OPTO NAMES: ";
    std::ostream_iterator<ALIstring> outs(std::cout," ");
    copy(wordlist.begin(), wordlist.end(), outs);
    std::cout << std::endl;
  }


  //---------- Read the data 
  for ( unsigned int ii=0; ii<dim(); ii++){
    filein.getWordsInLine( wordlist );
    fillData( ii, wordlist );
  }

  if( !valueIsSimulated(0) ) correctValueAndSigma();

  postConstruct();
}

void Measurement::constructFromOA

(

OpticalAlignMeasurementInfo &

measInfo

)

Definition at line 95 of file Measurement.cc.

References _OptONameList, buildOptONamesList(), gather_cfg::cout, ALIUtils::debug, dim(), ALIUtils::dumpVS(), fillData(), OpticalAlignMeasurementInfo::isSimulatedValue_, OpticalAlignMeasurementInfo::measObjectNames_, name(), postConstruct(), sigmaDimensionFactor(), type(), valueDimensionFactor(), and OpticalAlignMeasurementInfo::values_.

Referenced by Model::BuildMeasurementsFromOA().

{
  //---- Build wordlist to build object name list
  std::vector<std::string> objNames = measInfo.measObjectNames_;
  std::vector<std::string>::const_iterator site;
  std::vector<ALIstring> wordlist;
  //--- Fill the list of names of OptOs that take part in this measurement ( names only )
  for( site = objNames.begin(); site != objNames.end(); site++) {
    if( site != objNames.begin() ) wordlist.push_back("&");
    wordlist.push_back(*site);
  }
  buildOptONamesList( wordlist );

  if(ALIUtils::debug >= 3) {
    std::cout << "@@@@ Reading Measurement " << name() << " TYPE= " << type() << " " << measInfo << std::endl
          << " MEASURED OPTO NAMES: ";
    for( size_t ii = 0; ii < _OptONameList.size(); ii++ ){
      std::cout << _OptONameList[ii] << " ";
    }
    std::cout << std::endl;
  }

  //---------- No data, set to simulated_value
  for ( unsigned int ii=0; ii<dim(); ii++){
    wordlist.clear();
    wordlist.push_back( (measInfo.values_)[ii].name_ );
    char ctmp[20];
    if( measInfo.isSimulatedValue_[ii] ){
      if ( ALIUtils::debug >= 5 ) {
    std::cout << "Measurement::constructFromOA:  meas value " << ii << " "  << dim() << " = simulated_value" << std::endl;
      }
      wordlist.push_back("simulated_value");
    } else { 
      if ( ALIUtils::debug >= 5 ) {
    std::cout << "Measurement::constructFromOA:  meas value " << ii << " "  << dim() << " = " << measInfo.values_.size() << std::endl;
      }
      ALIdouble val = (measInfo.values_)[ii].value_ / valueDimensionFactor(); //in XML  values are without dimensions, so neutralize multiplying by valueDimensionFactor() in fillData
      gcvt( val, 10, ctmp );
      wordlist.push_back( ctmp );
    }
    ALIdouble err = (measInfo.values_)[ii].error_ / sigmaDimensionFactor(); //in XML  values are without dimensions, so neutralize multiplying by valueDimensionFactor() in fillData
    gcvt( err, 10, ctmp );
    wordlist.push_back( ctmp );
    std::cout << " sigma " << err << " = " << ctmp << " " << (measInfo.values_)[ii].error_ << std::endl;
    //-    wordlist.push_back( "simulated_value" );
    //-   wordlist.push_back( "1." );
      if ( ALIUtils::debug >= 5 ) ALIUtils::dumpVS(wordlist, " Measurement: calling fillData ");
    //-    std::cout << " MEAS INFO " << measInfo << std::endl;
    //-   std::cout << ii << " MEAS INFO PARAM " <<  (measInfo.values_)[ii] << std::endl;
    //- std::cout << ii << " MEAS INFO PARAM VALUE " <<  (measInfo.values_)[ii].value_ << std::endl;
    fillData( ii, wordlist );
  }

  postConstruct();

}

void Measurement::copyMeas	(	Measurement *	meas,
		const std::string &	subsstr1,
		const std::string &	subsstr2
	)

Definition at line 649 of file Measurement.cc.

References buildOptONamesList(), ALIUtils::changeName(), filterCSVwithJSON::copy, gather_cfg::cout, ALIUtils::debug, dim(), name(), OptOList(), postConstruct(), sigma(), theDim, theName, theSigma, theType, theValue, theValueIsSimulated, theValueSimulated, theValueSimulated_orig, type(), value(), valueIsSimulated(), valueSimulated(), and valueSimulated_orig().

Referenced by Model::copyMeasurements().

{
  theDim = meas->dim();
  theType = meas->type();
  theName =  ALIUtils::changeName( meas->name(), subsstr1, subsstr2);

   //  _OptOnames = new ALIstring[theDim];
  theValueSimulated = new ALIdouble[theDim];
  theValueSimulated_orig = new ALIdouble[theDim];
  theValueIsSimulated = new ALIbool[theDim];
  theValue = const_cast<ALIdouble*>(meas->value());
  theSigma = const_cast<ALIdouble*>(meas->sigma());

  unsigned int ii;
  for(ii = 0; ii < theDim; ii++) {
    theValueSimulated[ii] = meas->valueSimulated( ii );
    theValueSimulated_orig[ii] = meas->valueSimulated_orig( ii );
    theValueIsSimulated[ii] = meas->valueIsSimulated( ii );
  }

  //--------- Fill the list of names of OptOs that take part in this measurement ( names only )

  std::vector<std::string> wordlist;
  std::vector<OpticalObject*>& optolist = meas->OptOList();
  ALIuint nOptos = optolist.size();
  for ( ALIuint ii = 0; ii < nOptos; ii++ ) {
    wordlist.push_back( ALIUtils::changeName( optolist[ii]->longName(), subsstr1, subsstr2) );
    std::cout << " copymeas " << ALIUtils::changeName( optolist[ii]->longName(), subsstr1, subsstr2) << std::endl;
    if( ii != nOptos -1 ) wordlist.push_back("&");
  }

  buildOptONamesList( wordlist );
  
  if(ALIUtils::debug >= 3) {
    std::cout << "@@@@ Reading Measurement " << name() << " TYPE= " << type() << std::endl
          << " MEASURED OPTO NAMES: ";
    std::ostream_iterator<ALIstring> outs(std::cout," ");
    copy(wordlist.begin(), wordlist.end(), outs);
    std::cout << std::endl;
  }


  postConstruct();

}

virtual void Measurement::correctValueAndSigma ( )

inlinevirtual

Reimplemented in MeasurementDistancemeter, MeasurementDistancemeter3dim, MeasurementTiltmeter, MeasurementCOPS, and MeasurementSensor2D.

Definition at line 67 of file Measurement.h.

Referenced by construct(), Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().

{};

std::vector< ALIdouble > Measurement::DerivativeRespectEntry

(

Entry *

entry

)

Definition at line 511 of file Measurement.cc.

References calculateSimulatedValue(), dtNoiseDBValidation_cfg::cerr, gather_cfg::cout, ALIUtils::debug, Entry::displace(), cmsRelvalreport::exit, ALIUtils::getMaximumDeviationDerivative(), Entry::name(), OpticalObject::name(), name(), Entry::OptOCurrent(), OpticalObject::resetGlobalCoordinates(), Entry::startingDisplacement(), theDim, theValueSimulated, and theValueSimulated_orig.

{
  //---------- std::vector of derivatives to return
  std::vector<ALIdouble> deriv;
  ALIdouble sumderiv;
  
  //---------- displacement to start with 
  ALIdouble displacement = entry->startingDisplacement();
  //----- all angles are in radians, so, if displace is not, rescale it before making the displacement 
  //-  displacement *= entry->SigmaDimensionFactor();
  if( ALIUtils::debug >= 3) std::cout << std::endl << "%%% Derivative w.r.t. entry " << entry->name() << ": displacement = " << displacement << std::endl;
  
  ALIint count_itera = 0; 
  
  //---------- Loop decreasing the displacement a factor 2, until the precision set is reached
  do {
    count_itera++;
    entry->displace( displacement );
    
    if ( ALIUtils::debug >= 5) std::cout << "Get simulated value for displacement " << displacement << std::endl;
    calculateSimulatedValue( 0 ); 
    
    //---------- Get sum of derivatives
    sumderiv = 0;   
    for ( ALIuint ii = 0; ii < theDim; ii++) {
      sumderiv += fabs( theValueSimulated[ii] - theValueSimulated_orig[ii] );
      if( ALIUtils::debug >= 4 ) {
    std::cout << "iteration " << count_itera << " COOR " << ii 
         << " difference =" << ( theValueSimulated[ii] - theValueSimulated_orig[ii] )
      //-         << "  " << theValueSimulated[ii] << "  " << theValueSimulated_orig[ii] 
         << " derivative = " << (theValueSimulated[ii] - theValueSimulated_orig[ii]) /displacement << " disp " << displacement 
         << " sum derivatives = " << sumderiv << std::endl;
      }
      if( ALIUtils::debug >= 5 ) {
        std::cout << " new simu value= " << theValueSimulated[ii] << " orig simu value " << theValueSimulated_orig[ii] << std::endl;
       }
    }
    if (count_itera >= 100) {
      std::cerr << "EXITING: too many iterations in derivative, displacement is " <<
    displacement << " sum of derivatives is " << sumderiv << std::endl;
      exit(3);   
    }
    displacement /= 2.; 
    //-    std::cout << "sumderiv " << sumderiv << " maximu " <<  Fit::maximum_deviation_derivative << std::endl;
  }while( sumderiv > ALIUtils::getMaximumDeviationDerivative() );
  displacement *= 2; 
  
  //---------- Enough precision reached: pass result
  for ( ALIuint ii = 0; ii < theDim; ii++) {
    deriv.push_back( ( theValueSimulated[ii] - theValueSimulated_orig[ii] ) / displacement );
    //----- change it to entry sigma dimensions
    //     deriv[ii] /= entry->SigmaDimensionFactor();
    if( ALIUtils::debug >= 1) std::cout << name() << ": " <<  entry->OptOCurrent()->name() << " " <<  entry->name() << " " << ii << "### DERIVATIVE: " << deriv[ii] <<  std::endl;
  }
  //-  if(ALIUtils::debug >= 5) std::cout << "END derivative: " << deriv << "disp" << displacement << std::endl;
  
  //--------------------- Reset _centreGlob and _rmGlob of OptO entry belongs to (and component OptOs)
  entry->OptOCurrent()->resetGlobalCoordinates();
  
  return deriv;
 
}

const ALIuint Measurement::dim ( ) const

inline

Definition at line 82 of file Measurement.h.

References theDim.

Referenced by calculateOriginalSimulatedValue(), construct(), constructFromOA(), copyMeas(), MeasurementCOPS::correctValueAndSigma(), CocoaToDDLMgr::measurementsAsSpecPars(), Model::readMeasurementsFromFile(), CocoaDaqReaderText::ReadNextEvent(), MeasurementCOPS::setConversionFactor(), and SetDimension().

                            { 
    return theDim;
  }

void Measurement::DumpBadOrderOptOs

(

)

Definition at line 487 of file Measurement.cc.

References begin, dtNoiseDBValidation_cfg::cerr, ALIUtils::debug, cmsRelvalreport::exit, and OptONameList().

Referenced by MeasurementSensor2D::calculateSimulatedValue(), MeasurementDistancemeter::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), MeasurementTiltmeter::calculateSimulatedValue(), MeasurementCOPS::calculateSimulatedValue(), and MeasurementDiffEntry::calculateSimulatedValue().

{
  std::cerr << " Detector can not make measurement with these optical objects " << std::endl;
  if (ALIUtils::debug >= 1) {
    //  std::vector<OpticalObject*>::iterator voite;
    //      for ( voite = _OptOList.begin(); 
    //     voite != _OptOList.end(); voite++) {
    //    std::cout << (*voite)->type() << " : " << (*voite)->name() << std::endl;
    // }
    std::vector<ALIstring>::const_iterator vsite;
    for ( vsite = OptONameList().begin(); 
      vsite != OptONameList().end(); vsite++) {
      std::cerr << (*vsite) << " : " ;
    }
    std::cerr << std::endl;
  }
  exit(2);

}

void Measurement::fillData	(	ALIuint	coor,
		const std::vector< ALIstring > &	wl
	)

Definition at line 200 of file Measurement.cc.

References dtNoiseDBValidation_cfg::cerr, filterCSVwithJSON::copy, gather_cfg::cout, ALIUtils::debug, cmsRelvalreport::exit, ParameterMgr::getInstance(), ParameterMgr::getParameterValue(), ALIUtils::IsNumber(), sigmaDimensionFactor(), theDim, theSigma, theValue, theValueIsSimulated, theValueType, and valueDimensionFactor().

Referenced by construct(), constructFromOA(), Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().

{
  if ( ALIUtils::debug >= 3 ) {
    std::cout << "@@ Filling coordinate " << coor << std::endl ;
    //-   ostream_iterator<ALIstring> outs(std::cout," ");
    //-  copy(wordlist.begin(), wordlist.end(), outs);
  }
  
  ParameterMgr* parmgr = ParameterMgr::getInstance();

  //---------- Check that there are 3 attributes: name, value, error
  if( wordlist.size() != 3 ) {
    //    ALIFileIn::getInstance( Model::SDFName() ).ErrorInLine();
    std::cerr << " Incorrect format for Measurement value:" << std::endl; 
    std::ostream_iterator<ALIstring> outs(std::cout," ");
    copy(wordlist.begin(), wordlist.end(), outs);
    std::cout << std::endl << "There should be three words: name value sigma " << std::endl;
    exit(2);
  }

  //---------- check coor value
  if (coor >= theDim ) {
    // ALIFileIn::getInstance( Model::SDFName() ).ErrorInLine();
    std::cerr << "Trying to fill Measurement coordinate No "
     << coor << " but the dimension is " << theDim << std::endl; 
    exit(2);
  }

  //---------- set data members 
  //----- Set valueType
  theValueType[coor] = wordlist[0];

  //----- Set value (translate it if a PARAMETER is used)
  ALIdouble val = 0.;
  theValueIsSimulated[coor] = 0;
  if( !ALIUtils::IsNumber(wordlist[1]) ) {
    if ( parmgr->getParameterValue( wordlist[1], val ) == 0 ) {
      if( wordlist[1] == ALIstring("simulated_value") ) {
    theValueIsSimulated[coor] = 1;
      } else {
    //  ALIFileIn::getInstance( Model::SDFName() ).ErrorInLine();
    std::cerr << "!!! parameter for value not found: " << wordlist[1].c_str() << std::endl;
    exit(2);
      }
    }
    //d val *= valueDimensionFactor();
  } else {
    //d val = DimensionMgr()::getInstance()->extractValue( wordlist[1], ValueDimensionFactor() );
    val = atof( wordlist[1].c_str() ); 
  }
  val *= valueDimensionFactor();
  if( ALIUtils::debug >= 3 ) std::cout << "Meas VALUE= " << val << " (ValueDimensionFactor= " << valueDimensionFactor() <<std::endl;

  //----- Set sigma (translate it if a PARAMETER is used)
  ALIdouble sig = 0.;
  if( !ALIUtils::IsNumber(wordlist[2]) ) {
    if ( parmgr->getParameterValue( wordlist[2], sig ) == 0 ) {
      // ALIFileIn::getInstance( Model::SDFName() ).ErrorInLine();
      std::cerr << "!!! parameter for sigma not found: " << wordlist[2].c_str() << std::endl;
      exit(2);
    }
    //d sig *= sigmaDimensionFactor();
  } else {
    //    sig = DimensionMgr()::getInstance()->extractValue( wordlist[2], ValueDimensionFactor() );
    sig = atof( wordlist[2].c_str() );  
  }
  sig *= sigmaDimensionFactor();
  if( ALIUtils::debug >= 3) std::cout << "SIGMA= " << sig << " (SigmaDimensionFactor= " << sigmaDimensionFactor() <<std::endl;
  
  //----- set theValue & theSigma
  theValue[coor] = val;
  theSigma[coor] = sig;

}

void Measurement::fillData	(	ALIuint	coor,
		OpticalAlignParam *	oaParam
	)

Definition at line 277 of file Measurement.cc.

References dtNoiseDBValidation_cfg::cerr, gather_cfg::cout, ALIUtils::debug, cmsRelvalreport::exit, GlobalOptionMgr::getInstance(), GlobalOptionMgr::GlobalOptions(), OpticalAlignParam::sigma(), sigmaDimensionFactor(), theDim, theSigma, theValue, theValueIsSimulated, OpticalAlignParam::value(), and valueDimensionFactor().

{
  if ( ALIUtils::debug >= 3 ) {
    std::cout << "@@ Filling coordinate " << coor << std::endl ;
  }
  
  //  ParameterMgr* parmgr = ParameterMgr::getInstance();

  //---------- check coor value
  if (coor >= theDim ) {
    std::cerr << "Trying to fill Measurement coordinate No "
     << coor << " but the dimension is " << theDim << std::endl; 
    exit(2);
  }

  //---------- set data members 
  //----- Set value (translate it if a PARAMETER is used)
  ALIdouble val = 0.;
  theValueIsSimulated[coor] = 0;
  val = oaParam->value();
  val *= valueDimensionFactor();
  theValue[coor] = val;
  if( ALIUtils::debug >= 3 ) std::cout << "Meas VALUE= " << val << " (ValueDimensionFactor= " << valueDimensionFactor() <<std::endl;

  ALIbool sigmaFF = GlobalOptionMgr::getInstance()->GlobalOptions()["measurementErrorFromFile"];
  if( sigmaFF ) {
    //----- Set sigma (translate it if a PARAMETER is used)
    ALIdouble sig = 0.;
    sig = oaParam->sigma(); // it is in mm always
    sig *= sigmaDimensionFactor();
    theSigma[coor] = sig;
    if( ALIUtils::debug >= 3) std::cout << "SIGMA= " << sig << " (SigmaDimensionFactor= " << sigmaDimensionFactor() <<std::endl;
   
  }
}

static ALIstring Measurement::getCurrentDate ( )

inlinestatic

Definition at line 152 of file Measurement.h.

References theCurrentDate.

Referenced by FittedEntriesSet::FittedEntriesSet().

                                   {
    return theCurrentDate;
  }

static ALIstring Measurement::getCurrentTime ( )

inlinestatic

Definition at line 155 of file Measurement.h.

References theCurrentTime.

Referenced by FittedEntriesSet::FittedEntriesSet().

                                   {
    return theCurrentTime;
  }

const CLHEP::Hep3Vector& Measurement::getLightRayDirection ( ) const

inline

Definition at line 162 of file Measurement.h.

References theLightRayDirection.

                                                      { 
    return theLightRayDirection; 
  }

const CLHEP::Hep3Vector& Measurement::getLightRayPosition ( ) const

inline

Definition at line 159 of file Measurement.h.

References theLightRayPosition.

                                                     {
    return theLightRayPosition; 
  }

ALIstring Measurement::getMeasuringBehaviour

(

const std::vector< OpticalObject * >::const_iterator

vocite

)

Definition at line 591 of file Measurement.cc.

References _OptOList, and _OptONameList.

Referenced by MeasurementSensor2D::calculateSimulatedValue(), MeasurementTiltmeter::calculateSimulatedValue(), MeasurementDistancemeter::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), and MeasurementCOPS::calculateSimulatedValue().

                                                                                                    { 
  std::vector<ALIstring>::const_iterator vscite = _OptONameList.begin() +
    ( vocite - _OptOList.begin() ); // point to corresponding name of this OptO
  ALIint colon = (*vscite).find(':');
  ALIstring behav;
  if(colon != -1 ) {
    behav = (*vscite).substr(colon+1,(*vscite).size());
  } else {
    behav = " ";
  }
  return behav;
}

const OpticalObject * Measurement::getPreviousOptO

(

const OpticalObject *

Popto

)

const

Definition at line 608 of file Measurement.cc.

References _OptOList, dtNoiseDBValidation_cfg::cerr, cmsRelvalreport::exit, OpticalObject::name(), and name().

Referenced by OptODistancemeter::makeMeasurement(), and OptODistancemeter3dim::makeMeasurement().

{
  //--------- Loop OptOs that take part in this measurement
  std::vector<OpticalObject*>::const_iterator vocite;
  for( vocite = _OptOList.begin(); vocite != _OptOList.end(); vocite++ ){
    if( *vocite == Popto ) {
      if( vocite == _OptOList.begin() ) {
    std::cerr << " ERROR in  getPreviousOptO of measurement " << name() << std::endl;
    std::cerr << " OptO " << Popto->name() << " is the first one " << std::endl;
        exit(1);
      } else {
        return *(vocite-1);
      }
    }
  }
  
  std::cerr << " ERROR in  getPreviousOptO of measurement " << name() << std::endl;
  std::cerr << " OptO " << Popto->name() << " not found " << std::endl;
  exit(1);
}

static ALIstring& Measurement::measurementsFileName ( )

inlinestatic

Definition at line 213 of file Measurement.h.

References theMeasurementsFileName.

Referenced by Model::readMeasurementsFromFile().

                                          { 
   return theMeasurementsFileName;
 }

const ALIstring& Measurement::name ( ) const

inline

Definition at line 90 of file Measurement.h.

References theName.

Referenced by dataset.Dataset::__getFileInfoList(), BeautifulSoup.Tag::_invert(), MeasurementSensor2D::calculateSimulatedValue(), MeasurementDistancemeter::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), MeasurementTiltmeter::calculateSimulatedValue(), MeasurementCOPS::calculateSimulatedValue(), MeasurementDiffEntry::calculateSimulatedValue(), construct(), constructFromOA(), copyMeas(), Model::copyMeasurements(), DerivativeRespectEntry(), getPreviousOptO(), CocoaToDDLMgr::measurementsAsSpecPars(), printStartCalculateSimulatedValue(), OptOUserDefined::userDefinedBehaviour(), and Vispa.Views.PropertyView.Property::valueChanged().

                                {
    return theName;
  }

std::vector<OpticalObject*>& Measurement::OptOList ( )

inline

Definition at line 109 of file Measurement.h.

References _OptOList.

Referenced by MeasurementSensor2D::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), MeasurementTiltmeter::calculateSimulatedValue(), MeasurementDistancemeter::calculateSimulatedValue(), MeasurementCOPS::calculateSimulatedValue(), MeasurementDiffEntry::calculateSimulatedValue(), copyMeas(), and OptOCOPS::makeMeasurement().

                                        {
    return _OptOList;
  }

const std::vector<ALIstring>& Measurement::OptONameList ( ) const

inline

Definition at line 105 of file Measurement.h.

References _OptONameList.

Referenced by DumpBadOrderOptOs(), and CocoaToDDLMgr::measurementsAsSpecPars().

                                                   {
    return _OptONameList;
  }

void Measurement::postConstruct

(

)

Definition at line 154 of file Measurement.cc.

References Model::addMeasurementToList(), buildAffectingEntryList(), buildOptOList(), gather_cfg::cout, ALIUtils::debug, Model::MeasurementList(), and setName().

Referenced by construct(), constructFromOA(), and copyMeas().

{
  //---------- Set name as name of last OptO 
  setName();

  //---------- Transform for each Measurement the Measured OptO names to Measured OptO pointers
  buildOptOList();

  //---------- Build list of Entries that affect a Measurement 
  buildAffectingEntryList();
  
  //---------- add this measurement to the global list of measurements
  Model::addMeasurementToList( this );

  if ( ALIUtils::debug >= 10 ) {
    std::cout << Model::MeasurementList().size() << std::endl;
  }
}

void Measurement::printStartCalculateSimulatedValue ( const Measurement *  meas )

protected

Definition at line 444 of file Measurement.cc.

References gather_cfg::cout, name(), and type().

Referenced by MeasurementSensor2D::calculateSimulatedValue(), MeasurementDistancemeter::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), MeasurementTiltmeter::calculateSimulatedValue(), MeasurementCOPS::calculateSimulatedValue(), and MeasurementDiffEntry::calculateSimulatedValue().

{
  std::cout << std::endl << "@@@ Start calculation of simulated value of " << meas->type() << " Measurement " << meas->name() << std::endl;
}

const ALIstring& Measurement::sensorName ( )

inline

Definition at line 94 of file Measurement.h.

References theName.

                                {
    ALIstring sensName = theName;
    ALIint colon = theName.find(':');
    theName = theName.substr(colon+1, theName.length()-colon);
    return theName;
  }

virtual void Measurement::setConversionFactor ( const std::vector< ALIstring > &  wordlist )

inlinevirtual

Reimplemented in MeasurementCOPS, MeasurementSensor2D, MeasurementDistancemeter, MeasurementDistancemeter3dim, and MeasurementTiltmeter.

Definition at line 70 of file Measurement.h.

References dtNoiseDBValidation_cfg::cerr, and cmsRelvalreport::exit.

Referenced by Model::readSystemDescription().

                                                                          {
    std::cerr << " Measurement::setConversionFactor should never be called " << std::endl;
    exit(1); };

void Measurement::setCurrentDate ( const std::vector< ALIstring > &  wl )

static

set the date of the current measurement

Definition at line 631 of file Measurement.cc.

References dtNoiseDBValidation_cfg::cerr, ALIUtils::dumpVS(), cmsRelvalreport::exit, theCurrentDate, and theCurrentTime.

Referenced by Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().

{

  if( wl.size() != 3 ){
    std::cerr << "!!!EXITING: reading DATE of measurements set: it must have three words, it is though " << std::endl;
    ALIUtils::dumpVS(wl, " ");
   exit(1);
  } else if(wl[0] != "DATE:" ){ 
    std::cerr << "!!!EXITING: reading DATE of measurements set: first word must be 'DATE:', it is though " << std::endl;
    ALIUtils::dumpVS( wl, " ");
    exit(1);
  } else {
    theCurrentDate = wl[1];
    theCurrentTime = wl[2];
 }
} 

void Measurement::SetDimension ( ALIuint  dim )

inline

Definition at line 180 of file Measurement.h.

References dim(), and theDim.

                                 {
    theDim = dim;
  }    

void Measurement::setLightRayDirection ( const CLHEP::Hep3Vector &  lightRayDirection )

inline

Definition at line 224 of file Measurement.h.

References theLightRayDirection.

Referenced by OptOSensor2D::makeMeasurement().

   { theLightRayDirection = lightRayDirection; }

void Measurement::setLightRayPosition ( const CLHEP::Hep3Vector &  lightRayPosition )

inline

Definition at line 222 of file Measurement.h.

References theLightRayPosition.

Referenced by OptOSensor2D::makeMeasurement().

   { theLightRayPosition = lightRayPosition; }

static void Measurement::setMeasurementsFileName ( const ALIstring &  filename )

inlinestatic

Definition at line 216 of file Measurement.h.

References lut2db_cfg::filename, and theMeasurementsFileName.

                                                                  { 
   //-   std::cout << " setting file name " << filename << std::endl;
   theMeasurementsFileName = filename;
   //-   std::cout << " dsetting file name " << filename << std::endl;
 }

void Measurement::setName

(

)

Definition at line 697 of file Measurement.cc.

References _OptONameList, dtNoiseDBValidation_cfg::cerr, cmsRelvalreport::exit, theName, and type().

Referenced by Vispa.Gui.PortWidget.PortWidget::__init__(), Vispa.Views.PropertyView.Property::__init__(), and postConstruct().

{
  // name already set by passing one argument with sensor type
  if( theName != "" ) return;
  if( _OptONameList.size() == 0) {
    std::cerr << " !!! Error in your code, you cannot ask for the name of the Measurement before the OptONameList is build " << std::endl;
    exit(9);
  }
  std::vector<ALIstring>::iterator vsite = (_OptONameList.end()-1);
  theName = type() + ":" + (*vsite);
}

void Measurement::setSigma ( ALIint  coor, ALIdouble  val  )

inline

Definition at line 171 of file Measurement.h.

References theSigma.

Referenced by MeasurementDistancemeter::correctValueAndSigma(), MeasurementTiltmeter::correctValueAndSigma(), MeasurementDistancemeter3dim::correctValueAndSigma(), Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().

                                             {
    theSigma[coor] = val;
    //-    std::cout << coor << " setting sigma " << theSigma[coor] << std::endl;
  }

void Measurement::setType ( ALIstring  type )

inline

Definition at line 176 of file Measurement.h.

References theType, and type().

                                 {
    theType = type;
  }

void Measurement::setValue ( ALIint  coor, ALIdouble  val  )

inline

Definition at line 167 of file Measurement.h.

References theValue.

Referenced by Vispa.Views.PropertyView.StringProperty::buttonClicked(), Vispa.Views.PropertyView.FileProperty::buttonClicked(), Vispa.Views.PropertyView.FileVectorProperty::buttonClicked(), calculateOriginalSimulatedValue(), MeasurementSensor2D::correctValueAndSigma(), MeasurementCOPS::correctValueAndSigma(), MeasurementTiltmeter::correctValueAndSigma(), MeasurementDistancemeter3dim::correctValueAndSigma(), MeasurementDistancemeter::correctValueAndSigma(), Vispa.Views.PropertyView.TextEditWithButtonProperty::keyPressEvent(), and Vispa.Views.PropertyView.TextEditWithButtonProperty::setMultiline().

                                             {
    theValue[coor] = val;
  }

void Measurement::setValueSimulated ( ALIint  coor, ALIdouble  value  )

inline

Definition at line 196 of file Measurement.h.

References theValueSimulated, and value().

Referenced by MeasurementDiffEntry::calculateSimulatedValue(), OptOTiltmeter::makeMeasurement(), OptOSensor2D::makeMeasurement(), OptODistancemeter3dim::makeMeasurement(), OptODistancemeter::makeMeasurement(), and OptOCOPS::makeMeasurement().

                                                        {
      theValueSimulated[coor] = value;
  }

void Measurement::setValueSimulated_orig ( ALIint  coor, ALIdouble  value  )

inline

Definition at line 192 of file Measurement.h.

References theValueSimulated_orig, and value().

Referenced by calculateOriginalSimulatedValue().

                                                             {
      theValueSimulated_orig[coor] = value;
  }

virtual void Measurement::setXlaserLine ( ALIuint  ii, int  val  )

inlinevirtual

Reimplemented in MeasurementCOPS.

Definition at line 209 of file Measurement.h.

Referenced by OptOCOPS::makeMeasurement().

{ };

const ALIdouble* Measurement::sigma ( ) const

inline

Definition at line 132 of file Measurement.h.

References theSigma.

Referenced by copyMeas(), MeasurementDistancemeter3dim::correctValueAndSigma(), MeasurementTiltmeter::correctValueAndSigma(), MeasurementDistancemeter::correctValueAndSigma(), CocoaToDDLMgr::measurementsAsSpecPars(), Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().

                                 {
    return theSigma;
  } 

const ALIdouble Measurement::sigma ( ALIuint  ii ) const

inline

Definition at line 136 of file Measurement.h.

References theSigma.

                                           {
    return theSigma[ii];
  } 

virtual const ALIdouble Measurement::sigmaDimensionFactor ( ) const

inlinevirtual

Definition at line 148 of file Measurement.h.

References ALIUtils::LengthSigmaDimensionFactor().

Referenced by constructFromOA(), fillData(), and MeasurementTiltmeter::setConversionFactor().

                                                      {
    return ALIUtils::LengthSigmaDimensionFactor();
  }

void Measurement::Substitute2p ( ALIstring &  ref, const ALIstring &  firstref, int  NtwoPoints  )

protected

Definition at line 423 of file Measurement.cc.

References gather_cfg::cout, ALIUtils::debug, and pickleFileParser::slash.

Referenced by buildOptOList().

{
  // '/' sets hierarchy of OptOs
  ALIstring slash("/");
  
  int pos1st = firstref.length();
  // Go back an '/' in firstref for each '..' in ref
  for (int ii=0; ii < Ntwopoints; ii++) {
      pos1st = firstref.find_last_of( slash, pos1st-1);
      if ( ALIUtils::debug >=9 ) std::cout << "pos1st=" << pos1st;
  }

  if ( ALIUtils::debug >=9 ) std::cout << "before change ref: " << ref << " 1ref " << firstref << std::endl;
  // Substitute name
  ref.replace( 0, (Ntwopoints*3)-1, firstref, 0, pos1st);
  if ( ALIUtils::debug >=9 ) std::cout << "after change ref: " << ref << " 1ref " << firstref << std::endl;

}

const ALIstring& Measurement::type ( ) const

inline

Definition at line 86 of file Measurement.h.

References theType.

Referenced by MeasurementDistancemeter::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), MeasurementCOPS::calculateSimulatedValue(), construct(), constructFromOA(), copyMeas(), Model::copyMeasurements(), Vispa.Plugins.ConfigEditor.ConfigDataAccessor.ConfigDataAccessor::inputCommands(), CocoaToDDLMgr::measurementsAsSpecPars(), Vispa.Plugins.ConfigEditor.ConfigDataAccessor.ConfigDataAccessor::outputCommands(), Vispa.Plugins.ConfigEditor.ConfigDataAccessor.ConfigDataAccessor::outputEventContent(), printStartCalculateSimulatedValue(), Vispa.Plugins.ConfigEditor.ConfigDataAccessor.ConfigDataAccessor::properties(), setName(), and setType().

                                {
    return theType;
  }

const ALIdouble* Measurement::value ( ) const

inline

Definition at line 125 of file Measurement.h.

References theValue.

Referenced by Vispa.Views.PropertyView.FileProperty::buttonClicked(), MeasurementDiffEntry::calculateSimulatedValue(), Types.string::configValue(), Types.FileInPath::configValue(), copyMeas(), MeasurementSensor2D::correctValueAndSigma(), MeasurementCOPS::correctValueAndSigma(), MeasurementTiltmeter::correctValueAndSigma(), MeasurementDistancemeter::correctValueAndSigma(), MeasurementDistancemeter3dim::correctValueAndSigma(), Mixins.UsingBlock::dumpPython(), OptOSensor2D::fastTraversesLightRay(), Types.int32::insertInto(), Types.uint32::insertInto(), Types.int64::insertInto(), Types.uint64::insertInto(), Mixins.UsingBlock::insertInto(), Types.double::insertInto(), Types.bool::insertInto(), Types.string::insertInto(), Types.FileInPath::insertInto(), Types.vint32::insertInto(), Types.vuint32::insertInto(), Types.vint64::insertInto(), Types.vuint64::insertInto(), Types.vdouble::insertInto(), Types.vbool::insertInto(), Types.vstring::insertInto(), Vispa.Views.PropertyView.FileProperty::labelDoubleClicked(), OptOTiltmeter::makeMeasurement(), OptODistancemeter::makeMeasurement(), OptOSensor2D::makeMeasurement(), OptODistancemeter3dim::makeMeasurement(), OptOCOPS::makeMeasurement(), CocoaToDDLMgr::measurementsAsSpecPars(), setValueSimulated(), and setValueSimulated_orig().

                                 {
    return theValue;
  } 

const ALIdouble Measurement::value ( ALIuint  ii ) const

inline

Definition at line 128 of file Measurement.h.

References theValue.

Referenced by Vispa.Views.PropertyView.FileProperty::buttonClicked(), Types.string::configValue(), Types.FileInPath::configValue(), Mixins.UsingBlock::dumpPython(), Types.int32::insertInto(), Types.uint32::insertInto(), Types.int64::insertInto(), Types.uint64::insertInto(), Mixins.UsingBlock::insertInto(), Types.double::insertInto(), Types.bool::insertInto(), Types.string::insertInto(), Types.FileInPath::insertInto(), Types.vint32::insertInto(), Types.vuint32::insertInto(), Types.vint64::insertInto(), Types.vuint64::insertInto(), Types.vdouble::insertInto(), Types.vbool::insertInto(), Types.vstring::insertInto(), and Vispa.Views.PropertyView.FileProperty::labelDoubleClicked().

                                            {
    return theValue[ii];
  } 

virtual const ALIdouble Measurement::valueDimensionFactor ( ) const

inlinevirtual

Definition at line 144 of file Measurement.h.

References ALIUtils::LengthValueDimensionFactor().

Referenced by constructFromOA(), fillData(), MeasurementTiltmeter::setConversionFactor(), MeasurementSensor2D::setConversionFactor(), and MeasurementCOPS::setConversionFactor().

                                                      {
    return ALIUtils::LengthValueDimensionFactor();
  }

bool Measurement::valueIsSimulated ( ALIint  coor )

inline

Definition at line 205 of file Measurement.h.

References theValueIsSimulated.

Referenced by calculateOriginalSimulatedValue(), construct(), copyMeas(), and CocoaToDDLMgr::measurementsAsSpecPars().

                                     {
      return theValueIsSimulated[coor];
  }

const ALIdouble Measurement::valueSimulated ( ALIuint  ii ) const

inline

Definition at line 117 of file Measurement.h.

References theValueSimulated.

Referenced by calculateOriginalSimulatedValue(), MeasurementDiffEntry::calculateSimulatedValue(), copyMeas(), OptOTiltmeter::makeMeasurement(), OptODistancemeter::makeMeasurement(), OptOSensor2D::makeMeasurement(), OptODistancemeter3dim::makeMeasurement(), and OptOCOPS::makeMeasurement().

                                                      {
    return theValueSimulated[ii];
  }

const ALIdouble Measurement::valueSimulated_orig ( ALIuint  ii ) const

inline

Definition at line 121 of file Measurement.h.

References theValueSimulated_orig.

Referenced by copyMeas().

                                                          {
    return theValueSimulated_orig[ii];
  }

const ALIstring Measurement::valueType ( ALIuint  ii ) const

inline

Definition at line 140 of file Measurement.h.

References theValueType.

Referenced by OptOSensor2D::makeMeasurement(), CocoaToDDLMgr::measurementsAsSpecPars(), Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().

                                               {
    return theValueType[ii];
  } 

virtual int Measurement::xlaserLine ( ALIuint  ii )

inlinevirtual

Reimplemented in MeasurementCOPS.

Definition at line 199 of file Measurement.h.

References dtNoiseDBValidation_cfg::cerr.

Referenced by OptOCOPS::makeMeasurement().

{ std::cerr << "!!!! Measurement::xlaserLine is not returning anything " << std::endl; abort(); };

Member Data Documentation

std::vector<OpticalObject*> Measurement::_OptOList

private

Definition at line 256 of file Measurement.h.

Referenced by AddOptOListItem(), buildAffectingEntryList(), buildOptOList(), getMeasuringBehaviour(), getPreviousOptO(), and OptOList().

std::vector<ALIstring> Measurement::_OptONameList

private

Definition at line 254 of file Measurement.h.

Referenced by AddOptONameListItem(), buildOptOList(), buildOptONamesList(), constructFromOA(), getMeasuringBehaviour(), OptONameList(), and setName().

ALIdouble Measurement::cameraScaleFactor = 1.

static

Definition at line 209 of file Measurement.h.

Referenced by Fit::FillMatricesWithMeasurements().

ALIbool Measurement::only1 = 0

static

Definition at line 267 of file Measurement.h.

Referenced by Fit::fitNextEvent(), Model::readMeasurementsFromFile(), and Model::readSystemDescription().

ALIstring Measurement::only1Date = ""

static

Definition at line 268 of file Measurement.h.

Referenced by Model::readMeasurementsFromFile(), and Model::readSystemDescription().

ALIstring Measurement::only1Time = ""

static

Definition at line 269 of file Measurement.h.

Referenced by Model::readMeasurementsFromFile(), and Model::readSystemDescription().

std::vector<Entry*> Measurement::theAffectingEntryList

private

Definition at line 258 of file Measurement.h.

Referenced by addAffectingEntriesFromOptO(), and affectingEntryList().

ALIstring Measurement::theCurrentDate = "99/99/99"

staticprivate

Definition at line 264 of file Measurement.h.

Referenced by getCurrentDate(), and setCurrentDate().

ALIstring Measurement::theCurrentTime = "99:99"

staticprivate

Definition at line 265 of file Measurement.h.

Referenced by getCurrentTime(), and setCurrentDate().

ALIuint Measurement::theDim

private

Definition at line 235 of file Measurement.h.

Referenced by copyMeas(), DerivativeRespectEntry(), dim(), fillData(), Measurement(), and SetDimension().

CLHEP::Hep3Vector Measurement::theLightRayDirection

private

Definition at line 261 of file Measurement.h.

Referenced by getLightRayDirection(), and setLightRayDirection().

CLHEP::Hep3Vector Measurement::theLightRayPosition

private

Definition at line 260 of file Measurement.h.

Referenced by getLightRayPosition(), and setLightRayPosition().

ALIstring Measurement::theMeasurementsFileName = ""

staticprivate

Definition at line 262 of file Measurement.h.

Referenced by measurementsFileName(), and setMeasurementsFileName().

ALIstring Measurement::theName

private

Definition at line 239 of file Measurement.h.

Referenced by twikiExport.Constituent::__str__(), twikiExport.Material::__str__(), copyMeas(), name(), sensorName(), and setName().

ALIdouble* Measurement::theSigma

private

Definition at line 238 of file Measurement.h.

Referenced by copyMeas(), fillData(), Measurement(), setSigma(), sigma(), and ~Measurement().

ALIstring Measurement::theType

private

Definition at line 236 of file Measurement.h.

Referenced by twikiExport.Constituent::__str__(), copyMeas(), setType(), and type().

ALIdouble* Measurement::theValue

private

Definition at line 237 of file Measurement.h.

Referenced by copyMeas(), fillData(), Measurement(), setValue(), value(), and ~Measurement().

ALIbool* Measurement::theValueIsSimulated

private

Definition at line 251 of file Measurement.h.

Referenced by copyMeas(), fillData(), Measurement(), and valueIsSimulated().

ALIdouble* Measurement::theValueSimulated

private

Definition at line 243 of file Measurement.h.

Referenced by copyMeas(), DerivativeRespectEntry(), Measurement(), setValueSimulated(), and valueSimulated().

ALIdouble* Measurement::theValueSimulated_orig

private

Definition at line 245 of file Measurement.h.

Referenced by copyMeas(), DerivativeRespectEntry(), Measurement(), setValueSimulated_orig(), and valueSimulated_orig().

ALIstring* Measurement::theValueType

private

Definition at line 240 of file Measurement.h.

Referenced by fillData(), Measurement(), and valueType().