Templated helper class to allow a selection on a certain object collection. More...

#include <DQM/Physics/interface/TopDQMHelpers.h>

Public Member Functions
bool	select (const edm::Event &event)
	apply selection
bool	select (const edm::Event &event, const edm::EventSetup &setup)
	apply selection override for jets
	SelectionStep (const edm::ParameterSet &cfg)
	default constructor
bool	selectVertex (const edm::Event &event)
	~SelectionStep ()
	default destructor
Private Attributes
edm::InputTag	btagLabel_
	choice for b-tag as extra selection type
double	btagWorkingPoint_
	choice of b-tag working point as extra selection type
int	eidPattern_
edm::InputTag	electronId_
	electronId label as extra selection type
std::string	jetCorrector_
	jet corrector as extra selection type
edm::InputTag	jetIDLabel_
	jetID as an extra selection type
StringCutObjectSelector < reco::JetID > *	jetIDSelect_
	selection string on the jetID
int	max_
int	min_
	min/max for object multiplicity
edm::InputTag	pvs_
StringCutObjectSelector< Object >	select_
	string cut selector
edm::InputTag	src_
	input collection

Detailed Description

template<typename Object>
class SelectionStep< Object >

Templated helper class to allow a selection on a certain object collection.

Templated helper class to allow a selection on a certain object collection, which may be monitored by a separate class afterwards. The class wraps and slightly extends the features of the StringCutParser to allow also to apply event based selections, according to a minimal or maximal number of elements in the collection after the object selection has been applied. It takes an edm::ParameterSet in the constructor, which should contain the following elements:

src : the input collection (mandatory).
select : the selection string (mandatory).
min : whether there is a min value on which to reject the whole event after the selection (optional).
max : whether there is a max value on which to reject the whole event after the selection (optional).
electronId : input tag of an electronId association map and selection pattern (optional).
jetCorrector : label of jet corrector (optional).
jetBTagger : parameters defining the btag algorithm and working point of choice (optional).
jetID : parameters defining the jetID value map and selection (optional).

The parameters _src_ and _select_ are mandatory. The parameters _min_ and _max_ are optional. The parameters _electronId_ and _jetCorrector_ are optional. They are added to keep the possibility to apply selections on id'ed electrons or on corrected jets. They may be omitted in the PSet for simplification reasons if not needed at any time. They are not effiective for other object collections but electrons or jets. If none of the two parameters _min_ or _max_ is found in the event the select function returns true if at least one object fullfilled the requirements.

The class has one template value, which is the object collection to apply the selection on. This has to be parsed to the StringCutParser class. The function select is overrided for jets to circumvent problems with the template specialisation. Note that for MET not type1 or muon corrections are supported on reco candidates.

Definition at line 149 of file TopDQMHelpers.h.

Constructor & Destructor Documentation

template<typename Object >

SelectionStep< Object >::SelectionStep ( const edm::ParameterSet & cfg )

default constructor

Definition at line 198 of file TopDQMHelpers.h.

References SelectionStep< Object >::btagLabel_, SelectionStep< Object >::btagWorkingPoint_, SelectionStep< Object >::eidPattern_, SelectionStep< Object >::electronId_, edm::ParameterSet::exists(), edm::ParameterSet::existsAs(), edm::ParameterSet::getParameter(), SelectionStep< Object >::jetCorrector_, SelectionStep< Object >::jetIDLabel_, SelectionStep< Object >::jetIDSelect_, SelectionStep< Object >::max_, and SelectionStep< Object >::min_.

                                                               :
  src_( cfg.getParameter<edm::InputTag>( "src"   )),
  select_( cfg.getParameter<std::string>("select")),
  jetIDSelect_(0)
{
  // construct min/max if the corresponding params
  // exist otherwise they are initialized with -1
  cfg.exists("min") ? min_= cfg.getParameter<int>("min") : min_= -1;
  cfg.exists("max") ? max_= cfg.getParameter<int>("max") : max_= -1;
  // read electron extras if they exist
  if(cfg.existsAs<edm::ParameterSet>("electronId")){ 
    edm::ParameterSet elecId=cfg.getParameter<edm::ParameterSet>("electronId");
    electronId_= elecId.getParameter<edm::InputTag>("src");
    eidPattern_= elecId.getParameter<int>("pattern");
  }
  // read jet corrector label if it exists
  if(cfg.exists("jetCorrector")){ jetCorrector_= cfg.getParameter<std::string>("jetCorrector"); }
  // read btag information if it exists
  if(cfg.existsAs<edm::ParameterSet>("jetBTagger")){
    edm::ParameterSet jetBTagger=cfg.getParameter<edm::ParameterSet>("jetBTagger");
    btagLabel_=jetBTagger.getParameter<edm::InputTag>("label");
    btagWorkingPoint_=jetBTagger.getParameter<double>("workingPoint");
  }
  // read jetID information if it exists
  if(cfg.existsAs<edm::ParameterSet>("jetID")){
    edm::ParameterSet jetID=cfg.getParameter<edm::ParameterSet>("jetID");
    jetIDLabel_ =jetID.getParameter<edm::InputTag>("label");
    jetIDSelect_= new StringCutObjectSelector<reco::JetID>(jetID.getParameter<std::string>("select"));
  }
}

template<typename Object>

SelectionStep< Object >::~SelectionStep ( ) [inline]

default destructor

Definition at line 154 of file TopDQMHelpers.h.

{};

Member Function Documentation

template<typename Object >

bool SelectionStep< Object >::select ( const edm::Event & event )

apply selection

Definition at line 231 of file TopDQMHelpers.h.

References accept(), edm::Event::getByLabel(), n, getGTfromDQMFile::obj, and alcazmumu_cfi::src.

Referenced by TopDiLeptonOfflineDQM::analyze(), TopHLTSingleLeptonDQM::analyze(), and TopSingleLeptonDQM::analyze().

{
  // fetch input collection
  edm::Handle<edm::View<Object> > src; 
  if( !event.getByLabel(src_, src) ) return false;

  // load electronId value map if configured such
  edm::Handle<edm::ValueMap<float> > electronId;
  if(!electronId_.label().empty()) {
    if( !event.getByLabel(electronId_, electronId) ) return false;
  }

  // determine multiplicity of selected objects
  int n=0;
  for(typename edm::View<Object>::const_iterator obj=src->begin(); obj!=src->end(); ++obj){
    // special treatment for electrons
    if(dynamic_cast<const reco::GsfElectron*>(&*obj)){
      unsigned int idx = obj-src->begin();
      if( electronId_.label().empty() ? true : ((int)(*electronId)[src->refAt(idx)] & eidPattern_) ){   
        if(select_(*obj))++n;
      }
    }
    // normal treatment
    else{
      if(select_(*obj))++n;
    }
  }
  bool accept=(min_>=0 ? n>=min_:true) && (max_>=0 ? n<=max_:true);
  return (min_<0 && max_<0) ? (n>0):accept;
}

template<typename Object >

bool SelectionStep< Object >::select	(	const edm::Event &	event,
		const edm::EventSetup &	setup
	)

apply selection override for jets

apply selection (w/o using the template class Object), override for jets

Definition at line 286 of file TopDQMHelpers.h.

References accept(), JetCorrector::correction(), edm::EventSetup::find(), edm::Event::getByLabel(), JetCorrector::getJetCorrector(), metsig::jet, n, getGTfromDQMFile::obj, and alcazmumu_cfi::src.

{
  // fetch input collection
  edm::Handle<edm::View<Object> > src; 
  if( !event.getByLabel(src_, src) ) return false;

  // load btag collection if configured such
  // NOTE that the JetTagCollection needs an
  // edm::View to reco::Jets; we have to add
  // another Handle bjets for this purpose
  edm::Handle<edm::View<reco::Jet> > bjets; 
  edm::Handle<reco::JetTagCollection> btagger;
  edm::Handle<edm::View<reco::Vertex> > pvertex; 
  if(!btagLabel_.label().empty()){ 
    if( !event.getByLabel(src_, bjets) ) return false;
    if( !event.getByLabel(btagLabel_, btagger) ) return false;
    if( !event.getByLabel(pvs_, pvertex) ) return false;
  }

  // load jetID value map if configured such 
  edm::Handle<reco::JetIDValueMap> jetID;
  if(jetIDSelect_){
    if( !event.getByLabel(jetIDLabel_, jetID) ) return false;

  }

  // load jet corrector if configured such
  const JetCorrector* corrector=0;
  if(!jetCorrector_.empty()){
    // check whether a jet correcto is in the event setup or not
    if(setup.find( edm::eventsetup::EventSetupRecordKey::makeKey<JetCorrectionsRecord>() )){
      corrector = JetCorrector::getJetCorrector(jetCorrector_, setup);
    }
    else{
      edm::LogVerbatim( "TopDQMHelpers" ) 
        << "\n"
        << "------------------------------------------------------------------------------------- \n"
        << " No JetCorrectionsRecord available from EventSetup:                                   \n" 
        << "  - Jets will not be corrected.                                                       \n"
        << "  - If you want to change this add the following lines to your cfg file               \n"
        << "                                                                                      \n"
        << "  ## load jet corrections                                                             \n"
        << "  process.load(\"JetMETCorrections.Configuration.JetCorrectionServicesAllAlgos_cff\") \n"
        << "  process.prefer(\"ak5CaloL2L3\")                                                     \n"
        << "                                                                                      \n"
        << "------------------------------------------------------------------------------------- \n";
    }
  }
  // determine multiplicity of selected objects
  int n=0;
  for(typename edm::View<Object>::const_iterator obj=src->begin(); obj!=src->end(); ++obj){
    // check for chosen btag discriminator to be above the 
    // corresponding working point if configured such 
    unsigned int idx = obj-src->begin();
    if( btagLabel_.label().empty() ? true : (*btagger)[bjets->refAt(idx)]>btagWorkingPoint_ ){   
      bool passedJetID=true;
      // check jetID for calo jets
      if( jetIDSelect_ && dynamic_cast<const reco::CaloJet*>(src->refAt(idx).get())){
        passedJetID=(*jetIDSelect_)((*jetID)[src->refAt(idx)]);
      }
      if(passedJetID){
        // scale jet energy if configured such
        Object jet=*obj; jet.scaleEnergy(corrector ? corrector->correction(*obj) : 1.);
        if(select_(jet))++n;
      }
    }
  }
  bool accept=(min_>=0 ? n>=min_:true) && (max_>=0 ? n<=max_:true);
  return (min_<0 && max_<0) ? (n>0):accept;
}

template<typename Object >

bool SelectionStep< Object >::selectVertex ( const edm::Event & event )

Definition at line 262 of file TopDQMHelpers.h.

References accept(), edm::Event::getByLabel(), n, getGTfromDQMFile::obj, and alcazmumu_cfi::src.

Referenced by TopSingleLeptonDQM::analyze().

{
  // fetch input collection
  edm::Handle<edm::View<Object> > src; 
  if( !event.getByLabel(src_, src) ) return false;

  // load electronId value map if configured such
  edm::Handle<edm::ValueMap<float> > electronId;
  if(!electronId_.label().empty()) {
    if( !event.getByLabel(electronId_, electronId) ) return false;
  }

  // determine multiplicity of selected objects
  int n=0;
  for(typename edm::View<Object>::const_iterator obj=src->begin(); obj!=src->end(); ++obj){
   
      if(select_(*obj))++n;
  }
  bool accept=(min_>=0 ? n>=min_:true) && (max_>=0 ? n<=max_:true);
  return (min_<0 && max_<0) ? (n>0):accept;
}

Member Data Documentation

template<typename Object>

edm::InputTag SelectionStep< Object >::btagLabel_ [private]

choice for b-tag as extra selection type

Definition at line 182 of file TopDQMHelpers.h.

Referenced by SelectionStep< Object >::SelectionStep().

template<typename Object>

double SelectionStep< Object >::btagWorkingPoint_ [private]

choice of b-tag working point as extra selection type

Definition at line 184 of file TopDQMHelpers.h.

Referenced by SelectionStep< Object >::SelectionStep().

template<typename Object>

int SelectionStep< Object >::eidPattern_ [private]

electronId pattern we expect the following pattern: 0: fails 1: passes electron ID only 2: passes electron Isolation only 3: passes electron ID and Isolation only 4: passes conversion rejection 5: passes conversion rejection and ID 6: passes conversion rejection and Isolation 7: passes the whole selection As described on https://twiki.cern.ch/twiki/bin/view/CMS/SimpleCutBasedEleID

Definition at line 178 of file TopDQMHelpers.h.

Referenced by SelectionStep< Object >::SelectionStep().

template<typename Object>

edm::InputTag SelectionStep< Object >::electronId_ [private]

electronId label as extra selection type

Definition at line 167 of file TopDQMHelpers.h.

Referenced by SelectionStep< Object >::SelectionStep().

template<typename Object>

std::string SelectionStep< Object >::jetCorrector_ [private]

jet corrector as extra selection type

Definition at line 180 of file TopDQMHelpers.h.

Referenced by SelectionStep< Object >::SelectionStep().