#include <DDHCalEndcapAlgo.h>

Public Member Functions
	DDHCalEndcapAlgo ()
int	equipModule (unsigned int i) const
void	execute (DDCompactView &cpv)
std::string	getAbsMat () const
double	getAngBot () const
double	getAngGap () const
double	getAngTop () const
double	getDrEnd () const
double	getDzShift () const
double	getDzStep () const
int	getEndcaps () const
std::string	getGenMat () const
double	getHeboxDepth () const
int	getLayer (unsigned int i, unsigned int j) const
int	getLayerN (unsigned int i) const
std::string	getLayerName (unsigned int i) const
int	getLayers () const
double	getLayerT (unsigned int i) const
int	getLayerType (unsigned int i) const
std::string	getModMat (unsigned int i) const
std::string	getModName (unsigned int i) const
int	getModType (unsigned int i) const
int	getModules () const
int	getNsectors () const
int	getNsectortot () const
int	getPhi () const
std::string	getPhiName (unsigned int i) const
std::string	getPlastMat () const
double	getRinBlock1 (unsigned i) const
double	getRinBlock2 (unsigned i) const
double	getRinDip () const
double	getRinKink () const
std::string	getRotation () const
std::string	getRotMat () const
double	getRout () const
double	getRoutBlock1 (unsigned i) const
double	getRoutBlock2 (unsigned i) const
double	getRoutDip () const
std::string	getScintMat () const
double	getScintT (unsigned int i) const
int	getSectionModule (unsigned i) const
double	getSlope () const
double	getThick (unsigned int i) const
double	getTolAbs () const
double	getTolPos () const
double	getTrim (unsigned int i, unsigned int j) const
double	getZ0Beam () const
double	getZ1Beam () const
double	getZEnd () const
double	getZFront () const
double	getZiBody () const
double	getZiDip () const
double	getZiKink () const
double	getZiL0Body () const
double	getZiL0Nose () const
double	getZiNose () const
double	getZmaxBlock (unsigned i) const
double	getZminBlock (unsigned i) const
double	getZShift () const
double	getZShiftHac2 () const
void	initialize (const DDNumericArguments &nArgs, const DDVectorArguments &vArgs, const DDMapArguments &mArgs, const DDStringArguments &sArgs, const DDStringVectorArguments &vsArgs)
virtual	~DDHCalEndcapAlgo ()
Protected Member Functions
void	constructGeneralVolume (DDCompactView &cpv)
void	constructInsideModule (DDLogicalPart module, int mod, DDCompactView &cpv)
void	constructInsideModule0 (DDLogicalPart module, int mod, DDCompactView &cpv)
void	constructInsideSector (DDLogicalPart sector, DDCompactView &cpv)
void	constructScintLayer (DDLogicalPart glog, double pDz, double yh, double bl, double tl, double alp, std::string name, int id, DDCompactView &cpv)
void	parameterLayer (int iphi, double rinF, double routF, double rinB, double routB, double zi, double zo, double &yh1, double &bl1, double &tl1, double &yh2, double &bl2, double &tl2, double &alp, double &theta, double &phi, double &xpos, double &ypos, double &zcpv)
void	parameterLayer0 (int mod, int layer, int iphi, double &yh, double &bl, double &tl, double &alp, double &xpos, double &ypos, double &zcpv)
Private Attributes
std::string	absMat
double	angBot
double	angGap
double	angTop
double	drEnd
double	dzShift
double	dzStep
std::vector< int >	eModule
std::string	genMaterial
double	heboxDepth
std::string	idName
std::string	idNameSpace
int	idOffset
std::vector< int >	layerN
std::vector< int >	layerN0
std::vector< int >	layerN1
std::vector< int >	layerN2
std::vector< int >	layerN3
std::vector< int >	layerN4
std::vector< int >	layerN5
std::vector< std::string >	layerName
int	layers
std::vector< double >	layerT
std::vector< int >	layerType
std::vector< std::string >	modMat
std::vector< std::string >	modName
std::vector< int >	modType
int	modules
int	nEndcap
int	nsectors
int	nsectortot
std::vector< std::string >	phiName
int	phiSections
std::string	plastMat
double	riDip
double	riKink
std::vector< double >	rinBlock1
std::vector< double >	rinBlock2
double	roDip
std::string	rotation
std::string	rotHalf
std::string	rotmat
std::string	rotns
double	rout
std::vector< double >	routBlock1
std::vector< double >	routBlock2
std::string	scintMat
std::vector< double >	scintT
std::vector< int >	sectionModule
double	slope
std::vector< double >	thick
double	tolAbs
double	tolPos
std::vector< double >	trimLeft
std::vector< double >	trimRight
double	z0Beam
double	z1Beam
double	zEnd
double	zFront
double	ziBody
double	ziDip
double	ziKink
double	ziL0Body
double	ziL0Nose
double	ziNose
std::vector< double >	zmaxBlock
std::vector< double >	zminBlock
double	zShift
double	zShiftHac2

Detailed Description

Definition at line 10 of file DDHCalEndcapAlgo.h.

Constructor & Destructor Documentation

DDHCalEndcapAlgo::DDHCalEndcapAlgo ( )

Definition at line 22 of file DDHCalEndcapAlgo.cc.

References LogDebug.

                                  :
  modMat(0),modType(0),sectionModule(0),layerN(0),layerN0(0),layerN1(0),
  layerN2(0),layerN3(0),layerN4(0),layerN5(0),thick(0),trimLeft(0),
  trimRight(0),zminBlock(0),zmaxBlock(0),rinBlock1(0),routBlock1(0),
  rinBlock2(0),routBlock2(0),layerType(0),layerT(0),scintT(0) {
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo info: Creating an instance";
}

DDHCalEndcapAlgo::~DDHCalEndcapAlgo ( ) [virtual]

Definition at line 30 of file DDHCalEndcapAlgo.cc.

{}

Member Function Documentation

void DDHCalEndcapAlgo::constructGeneralVolume ( DDCompactView & cpv ) [protected]

!!!!!!!!!!!!!!!!Should be zero. And removed as soon as

Definition at line 323 of file DDHCalEndcapAlgo.cc.

References alpha, constructInsideSector(), dbl_to_string(), DDrot(), DDSplit(), equipModule(), first, getAbsMat(), getAngBot(), getAngTop(), getDrEnd(), getDzShift(), getEndcaps(), getGenMat(), getNsectors(), getNsectortot(), getRinDip(), getRinKink(), getRotation(), getRout(), getRoutDip(), getSlope(), getZ1Beam(), getZEnd(), getZFront(), getZiBody(), getZiDip(), getZiKink(), getZiL0Body(), getZShift(), getZShiftHac2(), i, idName, idNameSpace, LogDebug, DDBase< N, C >::name(), mergeVDriftHistosByStation::name, dbtoconf::parent, phi, pi, DDSolidFactory::polyhedra(), DDCompactView::position(), makeMuonMisalignmentScenario::rot, rotation, rotHalf, rotns, edm::second(), and funct::tan().

Referenced by execute().

                                                                {
  
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: General volume...";
  bool proto = true;
  for (int i=0; i<3; i++) 
    if (equipModule(i) > 0) proto = false;

  DDRotation    rot;
  if (DDSplit(getRotation()).first == "NULL") rot = DDRotation();
  else rot = DDRotation(DDName(DDSplit(getRotation()).first,DDSplit(getRotation()).second));
  LogDebug("HCalGeom") << " First " << DDSplit(getRotation()).first
                       << " Second " << DDSplit(getRotation()).second 
                       << " Rotation " << rot;
  DDTranslation r0(0,0,getZShift());
  double alpha = CLHEP::pi/getNsectors();
  double dphi  = getNsectortot()*CLHEP::twopi/getNsectors();

  //vertical walls are allowed in SolidPolyhedra
  double delz = 0;

  vector<double> pgonZ, pgonRmin, pgonRmax;
  if (proto) {
    double zf = getZiBody() + getZShiftHac2();
    pgonZ.push_back(zf - getDzShift()); 
    pgonRmin.push_back(zf * tan(getAngBot())); 
    pgonRmax.push_back((zf - getZ1Beam())*getSlope()); 
  } else {
    pgonZ.push_back(getZFront()   - getDzShift()); 
    pgonRmin.push_back(getZFront()   * tan(getAngTop())); 
    pgonRmax.push_back((getZFront()   - getZ1Beam())*getSlope()); 
    pgonZ.push_back(getZiL0Body() - getDzShift()); 
    pgonRmin.push_back(getZiL0Body() * tan(getAngTop())); 
    pgonRmax.push_back((getZiL0Body() - getZ1Beam())*getSlope()); 
    pgonZ.push_back(getZiL0Body() - getDzShift()); 
    pgonRmin.push_back(getZiL0Body() * tan(getAngBot())); 
    pgonRmax.push_back((getZiL0Body() - getZ1Beam())*getSlope()); 
  }
  pgonZ.push_back(getZiKink()   - getDzShift()); 
  pgonRmin.push_back(getRinKink()); 
  pgonRmax.push_back(getRout()); 
  pgonZ.push_back(getZiDip()    - getDzShift()); 
  pgonRmin.push_back(getRinDip()); 
  pgonRmax.push_back(getRout()); 
  pgonZ.push_back(getZiDip()    - getDzShift() + delz); 
  pgonRmin.push_back(getRinDip()); 
  pgonRmax.push_back(getRoutDip()); 
  pgonZ.push_back(getZEnd()     - getDzShift()); 
  pgonRmin.push_back(getZEnd() * tan(getAngBot())); 
  pgonRmax.push_back(getRoutDip()); 
  pgonZ.push_back(getZEnd()); 
  pgonRmin.push_back(getZEnd() * tan(getAngBot())); 
  pgonRmax.push_back(getRoutDip()); 

  string name("Null");
  unsigned int i=0;
  DDSolid solid;
  solid = DDSolidFactory::polyhedra(DDName(idName, idNameSpace),
                                    getNsectortot(), -alpha, dphi, pgonZ, 
                                    pgonRmin, pgonRmax);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " 
                       << DDName(idName, idNameSpace) << " Polyhedra made of "
                       << getGenMat() << " with " << getNsectortot() 
                       << " sectors from " << -alpha/CLHEP::deg << " to " 
                       << (-alpha+dphi)/CLHEP::deg << " and with " 
                       << pgonZ.size() << " sections";
  for (i = 0; i <pgonZ.size(); i++) 
    LogDebug("HCalGeom") << "\t\tZ = " << pgonZ[i] << "\tRmin = " <<pgonRmin[i]
                         << "\tRmax = " << pgonRmax[i];

  DDName matname(DDSplit(getGenMat()).first, DDSplit(getGenMat()).second); 
  DDMaterial matter(matname);
  DDLogicalPart genlogic(DDName(idName, idNameSpace), matter, solid);

  DDName parentName = parent().name(); 
  cpv.position(DDName(idName, idNameSpace), parentName, 1, r0, rot);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " 
                       << DDName(idName, idNameSpace) << " number 1 positioned"
                       << " in " << parentName << " at " << r0 << " with " 
                       << rot;
  if (getEndcaps() != 1) {
    rot = DDRotation(DDName(rotHalf,rotns));
   cpv.position(DDName(idName, idNameSpace), parentName, 2, r0, rot);
    LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " 
                         << DDName(idName, idNameSpace) << " number 2 "
                         << "positioned in " << parentName  << " at " << r0
                         << " with " << rot;
  }

  //Forward half
  name  = idName + "Front";
  vector<double> pgonZMod, pgonRminMod, pgonRmaxMod;
  for (i=0; i < (pgonZ.size()-1); i++) {
    pgonZMod.push_back(pgonZ[i] + getDzShift()); 
    pgonRminMod.push_back(pgonRmin[i]); 
    pgonRmaxMod.push_back(pgonRmax[i]); 
  }
  solid = DDSolidFactory::polyhedra(DDName(name, idNameSpace),
                                    getNsectortot(), -alpha, dphi, pgonZMod,
                                    pgonRminMod, pgonRmaxMod);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << DDName(name,idNameSpace)
                       << " Polyhedra made of " << getGenMat() << " with "
                       << getNsectortot() << " sectors from " 
                       << -alpha/CLHEP::deg << " to " 
                       << (-alpha+dphi)/CLHEP::deg << " and with "
                       << pgonZMod.size() << " sections ";
  for (i = 0; i < pgonZMod.size(); i++) 
    LogDebug("HCalGeom") << "\t\tZ = " << pgonZMod[i] << "\tRmin = " 
                         << pgonRminMod[i] << "\tRmax = " << pgonRmaxMod[i];
  DDLogicalPart genlogich(DDName(name, idNameSpace), matter, solid);

  cpv.position(genlogich, genlogic, 1, DDTranslation(0.0, 0.0, -getDzShift()),
        DDRotation());
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << genlogich.name() 
                       << " number 1 positioned in " << genlogic.name() 
                       << " at (0,0," << -getDzShift() << ") with no rotation";
  
  //Construct sector (from -alpha to +alpha)
  name  = idName + "Module";
  solid =   DDSolidFactory::polyhedra(DDName(name, idNameSpace),
                                      1, -alpha, 2*alpha, pgonZMod,
                                      pgonRminMod, pgonRmaxMod);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << DDName(name,idNameSpace)
                       << " Polyhedra made of " << getGenMat() 
                       <<" with 1 sector from " << -alpha/CLHEP::deg << " to " 
                       << alpha/CLHEP::deg << " and with " << pgonZMod.size() 
                       << " sections";
  for (i = 0; i < pgonZMod.size(); i++) 
    LogDebug("HCalGeom") << "\t\tZ = " << pgonZMod[i] << "\tRmin = " 
                         << pgonRminMod[i] << "\tRmax = " << pgonRmaxMod[i];

  DDLogicalPart seclogic(DDName(name, idNameSpace), matter, solid);
  
  for (int ii=0; ii<getNsectortot(); ii++) {
    double phi    = ii*2*alpha;
    double phideg = phi/CLHEP::deg;
    
    DDRotation rotation;
    string rotstr("NULL");
    if (phideg != 0) {
      rotstr = "R"; 
      if (phideg < 100) rotstr = "R0"; 
      rotstr = rotstr + dbl_to_string(phideg);
      rotation = DDRotation(DDName(rotstr, rotns)); 
      if (!rotation) {
        LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: Creating a new "
                             << "rotation " << rotstr << "\t" << 90 << "," 
                             << phideg << ","  << 90 << "," << (phideg+90)
                             << ", 0, 0";
        rotation = DDrot(DDName(rotstr, rotns), 90*CLHEP::deg, 
                         phideg*CLHEP::deg, 90*CLHEP::deg, 
                         (90+phideg)*CLHEP::deg, 0*CLHEP::deg,  0*CLHEP::deg);
      } //if !rotation
    } //if phideg!=0
  
   cpv.position(seclogic, genlogich, ii+1, DDTranslation(0.0, 0.0, 0.0), rotation);
    LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << seclogic.name() 
                         << " number " << ii+1 << " positioned in " 
                         << genlogich.name() << " at (0,0,0) with " <<rotation;
  }
  
  //Construct the things inside the sector
  constructInsideSector(seclogic, cpv);

  //Backward half
  name  = idName + "Back";
  vector<double> pgonZBack, pgonRminBack, pgonRmaxBack;
  pgonZBack.push_back(getZEnd() - getDzShift()); 
  pgonRminBack.push_back(pgonZBack[0]*tan(getAngBot()) + getDrEnd()); 
  pgonRmaxBack.push_back(getRoutDip()); 
  pgonZBack.push_back(getZEnd()); 
  pgonRminBack.push_back(pgonZBack[1]*tan(getAngBot()) + getDrEnd()); 
  pgonRmaxBack.push_back(getRoutDip()); 
  solid = DDSolidFactory::polyhedra(DDName(name, idNameSpace),
                                    getNsectortot(), -alpha, dphi, pgonZBack,
                                    pgonRminBack, pgonRmaxBack);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << DDName(name,idNameSpace)
                       << " Polyhedra made of " << getAbsMat() << " with " 
                       << getNsectortot() << " sectors from " 
                       << -alpha/CLHEP::deg << " to " 
                       << (-alpha+dphi)/CLHEP::deg << " and with " 
                       << pgonZBack.size()      << " sections";
  for (i = 0; i < pgonZBack.size(); i++) 
    LogDebug("HCalGeom") << "\t\tZ = " << pgonZBack[i] << "\tRmin = " 
                         << pgonRminBack[i] << "\tRmax = " << pgonRmaxBack[i];
  DDName absMatname(DDSplit(getAbsMat()).first, DDSplit(getAbsMat()).second); 
  DDMaterial absMatter(absMatname);
  DDLogicalPart glog(DDName(name, idNameSpace), absMatter, solid);

  cpv.position(glog, genlogic, 1, DDTranslation(0.0, 0.0, 0.0), DDRotation());
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << glog.name() 
                       << " number 1 positioned in "  << genlogic.name() 
                       << " at (0,0,0) with no rotation";
}

void DDHCalEndcapAlgo::constructInsideModule	(	DDLogicalPart	module,
		int	mod,
		DDCompactView &	cpv
	)		`[protected]`

Definition at line 781 of file DDHCalEndcapAlgo.cc.

References alpha, constructScintLayer(), DDBase< N, C >::ddname(), DDSplit(), first, getAngBot(), getAngTop(), getDzStep(), getGenMat(), getLayer(), getLayerN(), getLayerName(), getLayerT(), getLayerType(), getModName(), getNsectors(), getPhi(), getPhiName(), getPlastMat(), getRotMat(), getRoutBlock2(), getScintT(), getSlope(), getThick(), getTrim(), getZ1Beam(), getZminBlock(), i, idNameSpace, idOffset, LogDebug, text2workspace::mod, DDName::name(), mergeVDriftHistosByStation::name, DDBase< N, C >::name(), parameterLayer(), phi, pi, DDCompactView::position(), diffTwoXMLs::r1, diffTwoXMLs::r2, makeMuonMisalignmentScenario::rot, rotns, edm::second(), funct::tan(), theta(), and DDSolidFactory::trap().

Referenced by constructInsideSector().

                                                                                              {
  
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: \t\tInside module ..." <<mod;

  //Pointers to the Rotation Matrices and to the Materials
  string rotstr = getRotMat();
  DDRotation rot(DDName(rotstr, rotns));
  DDName matName(DDSplit(getGenMat()).first, DDSplit(getGenMat()).second);
  DDMaterial matter(matName);
  DDName plasName(DDSplit(getPlastMat()).first, DDSplit(getPlastMat()).second);
  DDMaterial matplastic(plasName);

  double  alpha = CLHEP::pi/getNsectors();
  double  zi    = getZminBlock(mod);

  for (int i = 0; i < getLayerN(mod); i++) {
    string name;
    DDSolid solid;
    DDLogicalPart glog, plog;
    int     layer  = getLayer(mod,i);
    double  zo     = zi + 0.5*getDzStep();

    for (int iphi = 0; iphi < getPhi(); iphi++) {
      double  ziAir = zo - getThick(mod);
      double  rinF, rinB;
      if (layer == 1) {
        rinF  = ziAir * tan(getAngTop());
        rinB  = zo    * tan(getAngTop());
      } else {
        rinF  = ziAir * tan(getAngBot());
        rinB  = zo    * tan(getAngBot());
      }
      double routF = (ziAir - getZ1Beam()) * getSlope();
      double routB = (zo    - getZ1Beam()) * getSlope();
      if (routF > getRoutBlock2(mod)) routF =  getRoutBlock2(mod);
      if (routB > getRoutBlock2(mod)) routB =  getRoutBlock2(mod);
      LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: Layer " << i << " Phi "
                           << iphi << " Front " << ziAir << ", " << rinF
                           << ", " << routF << " Back " << zo << ", " << rinB
                           << ", " << routB;
      double yh1, bl1, tl1, yh2, bl2, tl2, theta, phi, alp;
      double xpos, ypos, zpos;
      parameterLayer(iphi, rinF, routF, rinB, routB, ziAir, zo, yh1, bl1, tl1, 
                     yh2, bl2, tl2, alp, theta, phi, xpos, ypos, zpos);
      
      name = module.name().name()+getLayerName(layer)+getPhiName(iphi)+"Air";
      solid = DDSolidFactory::trap(DDName(name, idNameSpace), 
                                   0.5*getThick(mod), theta, phi, yh1,
                                   bl1, tl1, alp, yh2, bl2, tl2, alp);
      LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << solid.name() 
                           << " Trap made of " << getGenMat() 
                           << " of dimensions " << 0.5*getThick(mod) << ", " 
                           << theta/CLHEP::deg << ", " << phi/CLHEP::deg
                           << ", " << yh1 << ", " << bl1 << ", " << tl1 << ", "
                           << alp/CLHEP::deg << ", " << yh2 << ", " << bl2 
                           << ", " << tl2 << ", " << alp/CLHEP::deg;
      glog = DDLogicalPart(solid.ddname(), matter, solid);

      DDTranslation r1(xpos, ypos, zpos);
      cpv.position(glog, module, layer+1, r1, rot);
      LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << glog.name() 
                           << " number " << layer+1 << " positioned in " 
                           << module.name() << " at " << r1 << " with " << rot;

      //Now the plastic with scintillators
      double yh = 0.5 * (routF - rinB) - getTrim(mod,iphi);
      double bl = 0.5 * rinB  * tan(alpha) - getTrim(mod,iphi);
      double tl = 0.5 * routF * tan(alpha) - getTrim(mod,iphi);
      name = module.name().name()+getLayerName(layer)+getPhiName(iphi);
      solid = DDSolidFactory::trap(DDName(name, idNameSpace), 
                                   0.5*getLayerT(layer), 0, 0, yh,
                                   bl, tl, alp, yh, bl, tl, alp);
      LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << solid.name() 
                           << " Trap made of " << getPlastMat() 
                           << " of dimensions " << 0.5*getLayerT(layer) 
                           << ", 0, 0, " << yh << ", " << bl << ", " << tl
                           << ", " << alp/CLHEP::deg << ", " << yh << ", " 
                           << bl << ", " << tl << ", " << alp/CLHEP::deg;
      plog = DDLogicalPart(solid.ddname(), matplastic, solid);

      ypos = 0.5*(routF+rinB) - xpos;
      DDTranslation r2(0., ypos, 0.);
      cpv.position(plog, glog, idOffset+layer+1, r2, DDRotation());
      LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << plog.name() 
                           << " number " << idOffset+layer+1 
                           << " positioned in " << glog.name() << " at " << r2
                           << " with no rotation";

      //Constructin the scintillators inside
      int copyNo = layer*10 + getLayerType(layer);
      name = getModName(mod)+getLayerName(layer)+getPhiName(iphi);
      constructScintLayer (plog, getScintT(layer), yh,bl,tl, alp,name,copyNo, cpv);
      zo += 0.5*getDzStep();
    } // End of loop over phi indices
    zi = zo - 0.5*getDzStep();
  }   // End of loop on layers
}

void DDHCalEndcapAlgo::constructInsideModule0	(	DDLogicalPart	module,
		int	mod,
		DDCompactView &	cpv
	)		`[protected]`

Definition at line 686 of file DDHCalEndcapAlgo.cc.

References constructScintLayer(), DDBase< N, C >::ddname(), DDSplit(), first, getAbsMat(), getAngBot(), getAngTop(), getDzStep(), getLayer(), getLayerName(), getLayerT(), getLayerType(), getModName(), getPhi(), getPhiName(), getPlastMat(), getRotMat(), getScintT(), getSlope(), getThick(), getTolAbs(), getZ1Beam(), getZminBlock(), idNameSpace, idOffset, LogDebug, text2workspace::mod, DDName::name(), mergeVDriftHistosByStation::name, DDBase< N, C >::name(), parameterLayer(), parameterLayer0(), phi, DDCompactView::position(), diffTwoXMLs::r1, diffTwoXMLs::r2, makeMuonMisalignmentScenario::rot, rotns, edm::second(), funct::tan(), theta(), and DDSolidFactory::trap().

Referenced by constructInsideSector().

                                                                                               {
  
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: \t\tInside module0 ..."<<mod;

  //Pointers to the Rotation Matrices and to the Materials
  string rotstr = getRotMat();
  DDRotation rot(DDName(rotstr, rotns));
  DDName matName(DDSplit(getAbsMat()).first, DDSplit(getAbsMat()).second);
  DDMaterial matabsorbr(matName);
  DDName plasName(DDSplit(getPlastMat()).first, DDSplit(getPlastMat()).second);
  DDMaterial matplastic(plasName);

  int     layer  = getLayer(mod,0);
  int     layer0 = getLayer(mod,1);
  string  name;
  double  xpos, ypos, zpos;
  DDSolid solid;
  DDLogicalPart glog, plog;
  for (int iphi = 0; iphi < getPhi(); iphi++) {
    double yh, bl, tl, alp;
    parameterLayer0(mod, layer, iphi, yh, bl, tl, alp, xpos, ypos, zpos);
    name = module.name().name()+getLayerName(layer)+getPhiName(iphi);
    solid = DDSolidFactory::trap(DDName(name, idNameSpace), 
                                 0.5*getLayerT(layer), 0, 0, yh,
                                 bl, tl, alp, yh, bl, tl, alp);
    LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << solid.name() 
                         << " Trap made of " << getPlastMat() 
                         << " of dimensions " << 0.5*getLayerT(layer) 
                         << ", 0, 0, " << yh << ", " << bl << ", " << tl 
                         << ", " << alp/CLHEP::deg << ", " << yh << ", " << bl 
                         << ", " << tl << ", " << alp/CLHEP::deg;
    glog = DDLogicalPart(solid.ddname(), matplastic, solid);

    DDTranslation r1(xpos, ypos, zpos);
    cpv.position(glog, module, idOffset+layer+1, r1, rot);
    LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << glog.name() 
                         << " number " << idOffset+layer+1 << " positioned in "
                         << module.name() << " at " << r1 << " with " << rot;
    //Now construct the layer of scintillator inside this
    int copyNo = layer0*10 + getLayerType(layer);
    name = getModName(mod)+getLayerName(layer)+getPhiName(iphi);
    constructScintLayer (glog, getScintT(layer), yh, bl, tl, alp, name, copyNo, cpv);
  }

  //Now the absorber layer
  double zi = getZminBlock(mod) + getLayerT(layer);
  double zo = zi + 0.5*getDzStep();
  double rinF, routF, rinB, routB;
  if (mod == 0) {
    rinF  = zi * tan(getAngTop());
    routF =(zi - getZ1Beam()) * getSlope();
    rinB  = zo * tan(getAngTop());
    routB =(zo - getZ1Beam()) * getSlope();
  } else {
    rinF  = zi * tan(getAngBot());
    routF = zi * tan(getAngTop());
    rinB  = zo * tan(getAngBot());
    routB = zo * tan(getAngTop());
  }
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: Module " << mod << " Front "
                       << zi << ", " << rinF << ", " << routF << " Back "
                       << zo << ", " << rinB << ", " << routB;
  double yh1, bl1, tl1, yh2, bl2, tl2, theta, phi, alp;
  parameterLayer(0, rinF, routF, rinB, routB, zi, zo, yh1, bl1, tl1, yh2, bl2, 
                 tl2, alp, theta, phi, xpos, ypos, zpos);
  double fact = getTolAbs();
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: Trim " << fact << " Param "
                       << yh1 << ", " << bl1 << ", " << tl1 << ", " << yh2
                       << ", " << bl2 << ", " << tl2;
  bl1 -= fact;
  tl1 -= fact;
  bl2 -= fact;
  tl2 -= fact;

  name = module.name().name()+"Absorber";
  solid = DDSolidFactory::trap(DDName(name, idNameSpace), 
                               0.5*getThick(mod), theta, phi, yh1,
                               bl1, tl1, alp, yh2, bl2, tl2, alp);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << solid.name() 
                       << " Trap made of " << getAbsMat() << " of dimensions " 
                       << 0.5*getThick(mod) << ", " << theta/CLHEP::deg << ", "
                       << phi/CLHEP::deg << ", " << yh1 << ", " << bl1 << ", " 
                       << tl1 << ", " << alp/CLHEP::deg << ", " << yh2 << ", "
                       << bl2 << ", " << tl2 << ", " << alp/CLHEP::deg;
  glog = DDLogicalPart(solid.ddname(), matabsorbr, solid);

  DDTranslation r2(xpos, ypos, zpos);
  cpv.position(glog, module, 1, r2, rot);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << glog.name() 
                       << " number 1 positioned in " << module.name() << " at "
                       << r2 << " with " << rot;
}

void DDHCalEndcapAlgo::constructInsideSector	(	DDLogicalPart	sector,
		DDCompactView &	cpv
	)		`[protected]`

!!!!!!!!!!!!!!!!Should be zero. And removed as soon as

Definition at line 519 of file DDHCalEndcapAlgo.cc.

References alpha, constructInsideModule(), constructInsideModule0(), DDSplit(), equipModule(), first, getAngBot(), getModMat(), getModName(), getModType(), getModules(), getNsectors(), getRinBlock1(), getRinBlock2(), getRinDip(), getRinKink(), getRout(), getRoutBlock1(), getRoutBlock2(), getRoutDip(), getSectionModule(), getSlope(), getZ1Beam(), getZiDip(), getZiKink(), getZmaxBlock(), getZminBlock(), getZShiftHac2(), i, idName, idNameSpace, gen::k, LogDebug, DDBase< N, C >::name(), mergeVDriftHistosByStation::name, pi, DDSolidFactory::polyhedra(), DDCompactView::position(), edm::second(), and funct::tan().

Referenced by constructGeneralVolume().

                                                                                     {
  
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: Modules (" << getModules()
                       << ") ...";
  double alpha = CLHEP::pi/getNsectors();

  for (int i = 0; i < getModules(); i++) {
    string  name   = idName + getModName(i);
    DDName matname(DDSplit(getModMat(i)).first, DDSplit(getModMat(i)).second); 
    DDMaterial matter(matname);
    
    if (equipModule(i)>0) {
      int nsec = getSectionModule(i);

      //vertical walls are allowed in SolidPolyhedra
      double deltaz = 0;
    
      vector<double> pgonZ, pgonRmin, pgonRmax;
      if (nsec == 3) {
        double zf = getZminBlock(i) + getZShiftHac2();
        pgonZ.push_back(zf);
        pgonRmin.push_back(zf*tan(getAngBot())); 
        pgonRmax.push_back((zf-getZ1Beam())*getSlope());
        pgonZ.push_back(getZiKink());  
        pgonRmin.push_back(getRinKink()); 
        pgonRmax.push_back(getRout());
      } else {
        pgonZ.push_back(getZminBlock(i));
        pgonRmin.push_back(getRinBlock1(i)); 
        pgonRmax.push_back(getRoutBlock1(i));
      }
      if (nsec == 4) {
        pgonZ.push_back(getZiDip());
        pgonRmin.push_back(getRinDip());
        pgonRmax.push_back(getRout());
        pgonZ.push_back(pgonZ[1] + deltaz);
        pgonRmin.push_back(pgonRmin[1]); 
        pgonRmax.push_back(getRoutDip());
      }
      pgonZ.push_back(getZmaxBlock(i));
      pgonRmin.push_back(getRinBlock2(i)); 
      pgonRmax.push_back(getRoutBlock2(i));

      //Solid & volume
      DDSolid solid;
      solid = DDSolidFactory::polyhedra(DDName(name, idNameSpace), 
                                        1, -alpha, 2*alpha,
                                        pgonZ, pgonRmin, pgonRmax);
      LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " 
                           << DDName(name,idNameSpace) << " Polyhedra made of "
                           << getModMat(i) << " with 1 sector from "
                           << -alpha/CLHEP::deg << " to " << alpha/CLHEP::deg 
                           << " and with " << nsec << " sections";
      for (unsigned int k=0; k<pgonZ.size(); k++)
        LogDebug("HCalGeom") << "\t\tZ = " << pgonZ[k] << "\tRmin = "
                             << pgonRmin[k] << "\tRmax = " << pgonRmax[k];
    
      DDLogicalPart glog(DDName(name, idNameSpace), matter, solid);

     cpv.position(glog, sector, i+1, DDTranslation(0.0, 0.0, 0.0), DDRotation());
      LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << glog.name() 
                           << " number " << i+1 << " positioned in " 
                           << sector.name() << " at (0,0,0) with no rotation";
      
      if (getModType(i) == 0) 
        constructInsideModule0 (glog, i, cpv);
      else
        constructInsideModule  (glog, i, cpv);
    }
  }
  
}

void DDHCalEndcapAlgo::constructScintLayer	(	DDLogicalPart	glog,
		double	pDz,
		double	yh,
		double	bl,
		double	tl,
		double	alp,
		std::string	name,
		int	id,
		DDCompactView &	cpv
	)		`[protected]`

Definition at line 881 of file DDHCalEndcapAlgo.cc.

References DDBase< N, C >::ddname(), DDSplit(), first, getScintMat(), idName, idNameSpace, LogDebug, mergeVDriftHistosByStation::name, DDBase< N, C >::name(), DDCompactView::position(), edm::second(), and DDSolidFactory::trap().

Referenced by constructInsideModule(), and constructInsideModule0().

                                                                                              {

  DDName matname(DDSplit(getScintMat()).first, DDSplit(getScintMat()).second);
  DDMaterial matter(matname);
  string name = idName+"Scintillator"+nm;

  DDSolid solid = DDSolidFactory::trap(DDName(name, idNameSpace), 0.5*dz, 0, 0,
                                       yh, bl, tl, alp, yh, bl, tl, alp);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << DDName(name,idNameSpace)
                       << " Trap made of " << getScintMat() <<" of dimensions "
                       << 0.5*dz << ", 0, 0, " << yh << ", "  << bl << ", " 
                       << tl << ", " << alp/CLHEP::deg << ", " << yh << ", " 
                       << bl << ", " << tl << ", " << alp/CLHEP::deg;

  DDLogicalPart glog(solid.ddname(), matter, solid); 

  cpv.position(glog, detector, id, DDTranslation(0,0,0), DDRotation());
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << glog.name() 
                       << " number " << id << " positioned in " 
                       << detector.name() << " at (0,0,0) with no rotation";

}

int DDHCalEndcapAlgo::equipModule ( unsigned int i ) const [inline]

Definition at line 22 of file DDHCalEndcapAlgo.h.

References eModule, and i.

Referenced by constructGeneralVolume(), and constructInsideSector().

{return eModule[i];}

void DDHCalEndcapAlgo::execute ( DDCompactView & cpv )

Definition at line 314 of file DDHCalEndcapAlgo.cc.

References constructGeneralVolume(), and LogDebug.

                                                 {
  
  LogDebug("HCalGeom") << "==>> Constructing DDHCalEndcapAlgo...";
  constructGeneralVolume(cpv);
  LogDebug("HCalGeom") << "<<== End of DDHCalEndcapAlgo construction ...";
}

std::string DDHCalEndcapAlgo::getAbsMat ( ) const [inline]

Definition at line 50 of file DDHCalEndcapAlgo.h.

References absMat.

Referenced by constructGeneralVolume(), and constructInsideModule0().

{return absMat;}

double DDHCalEndcapAlgo::getAngBot ( ) const [inline]

Definition at line 46 of file DDHCalEndcapAlgo.h.

References angBot.

Referenced by constructGeneralVolume(), constructInsideModule(), constructInsideModule0(), constructInsideSector(), and parameterLayer0().

{return angBot;}

double DDHCalEndcapAlgo::getAngGap ( ) const [inline]

Definition at line 47 of file DDHCalEndcapAlgo.h.

References angGap.

{return angGap;}

double DDHCalEndcapAlgo::getAngTop ( ) const [inline]

Definition at line 45 of file DDHCalEndcapAlgo.h.

References angTop.

Referenced by constructGeneralVolume(), constructInsideModule(), constructInsideModule0(), and parameterLayer0().

{return angTop;}

double DDHCalEndcapAlgo::getDrEnd ( ) const [inline]

Definition at line 44 of file DDHCalEndcapAlgo.h.

References drEnd.

Referenced by constructGeneralVolume().

{return drEnd;}

double DDHCalEndcapAlgo::getDzShift ( ) const [inline]

Definition at line 36 of file DDHCalEndcapAlgo.h.

References dzShift.

Referenced by constructGeneralVolume().

{return dzShift;}

double DDHCalEndcapAlgo::getDzStep ( ) const [inline]

Definition at line 35 of file DDHCalEndcapAlgo.h.

References dzStep.

Referenced by constructInsideModule(), and constructInsideModule0().

{return dzStep;}

int DDHCalEndcapAlgo::getEndcaps ( ) const [inline]

Definition at line 21 of file DDHCalEndcapAlgo.h.

References nEndcap.

Referenced by constructGeneralVolume().

{return nEndcap;}

std::string DDHCalEndcapAlgo::getGenMat ( ) const [inline]

Definition at line 17 of file DDHCalEndcapAlgo.h.

References genMaterial.

Referenced by constructGeneralVolume(), and constructInsideModule().

{return genMaterial;}

double DDHCalEndcapAlgo::getHeboxDepth ( ) const [inline]

Definition at line 43 of file DDHCalEndcapAlgo.h.

References heboxDepth.

{return heboxDepth;}

int DDHCalEndcapAlgo::getLayer	(	unsigned int	i,
		unsigned int	j
	)		const

Definition at line 32 of file DDHCalEndcapAlgo.cc.

References j, layerN0, layerN1, layerN2, layerN3, layerN4, and layerN5.

Referenced by constructInsideModule(), and constructInsideModule0().

                                                                   {

  switch (i) {
  case 0: 
    return layerN0[j];
    break;

  case 1: 
    return layerN1[j];
    break;

  case 2: 
    return layerN2[j];
    break;

  case 3: 
    return layerN3[j];
    break;

  case 4: 
    return layerN4[j];
    break;

  case 5: 
    return layerN5[j];
    break;

  default:
    return 0;
  }
}

int DDHCalEndcapAlgo::getLayerN ( unsigned int i ) const [inline]

Definition at line 56 of file DDHCalEndcapAlgo.h.

References i, and layerN.

Referenced by constructInsideModule().

{return layerN[i];}

string DTNoiseCalibration::getLayerName ( unsigned int i ) const [inline]

Definition at line 70 of file DDHCalEndcapAlgo.h.

References i, and layerName.

Referenced by constructInsideModule(), and constructInsideModule0().

{return layerName[i];}

int DDHCalEndcapAlgo::getLayers ( ) const [inline]

Definition at line 69 of file DDHCalEndcapAlgo.h.

References layers.

{return layers;}

double DDHCalEndcapAlgo::getLayerT ( unsigned int i ) const [inline]

Definition at line 72 of file DDHCalEndcapAlgo.h.

References i, and layerT.

Referenced by constructInsideModule(), constructInsideModule0(), and parameterLayer0().

{return layerT[i];}

int DDHCalEndcapAlgo::getLayerType ( unsigned int i ) const [inline]

Definition at line 71 of file DDHCalEndcapAlgo.h.

References i, and layerType.

Referenced by constructInsideModule(), and constructInsideModule0().

{return layerType[i];}

std::string DDHCalEndcapAlgo::getModMat ( unsigned int i ) const [inline]

Definition at line 53 of file DDHCalEndcapAlgo.h.

References i, and modMat.

Referenced by constructInsideSector().

{return modMat[i];}

std::string DDHCalEndcapAlgo::getModName ( unsigned int i ) const [inline]

Definition at line 52 of file DDHCalEndcapAlgo.h.

References i, and modName.

Referenced by constructInsideModule(), constructInsideModule0(), and constructInsideSector().

{return modName[i];}

int DDHCalEndcapAlgo::getModType ( unsigned int i ) const [inline]

Definition at line 54 of file DDHCalEndcapAlgo.h.

References i, and modType.

Referenced by constructInsideSector().

{return modType[i];}

int DDHCalEndcapAlgo::getModules ( ) const [inline]

Definition at line 51 of file DDHCalEndcapAlgo.h.

References modules.

Referenced by constructInsideSector().

{return modules;}

int DDHCalEndcapAlgo::getNsectors ( ) const [inline]

Definition at line 19 of file DDHCalEndcapAlgo.h.

References nsectors.

Referenced by constructGeneralVolume(), constructInsideModule(), constructInsideSector(), parameterLayer(), and parameterLayer0().

{return nsectors;}

int DDHCalEndcapAlgo::getNsectortot ( ) const [inline]

Definition at line 20 of file DDHCalEndcapAlgo.h.

References nsectortot.

Referenced by constructGeneralVolume().

{return nsectortot;}

int DDHCalEndcapAlgo::getPhi ( ) const [inline]

Definition at line 67 of file DDHCalEndcapAlgo.h.

References phiSections.

Referenced by constructInsideModule(), and constructInsideModule0().

{return phiSections;}

std::string DDHCalEndcapAlgo::getPhiName ( unsigned int i ) const [inline]

Definition at line 68 of file DDHCalEndcapAlgo.h.

References i, and phiName.

Referenced by constructInsideModule(), and constructInsideModule0().

{return phiName[i];}

std::string DDHCalEndcapAlgo::getPlastMat ( ) const [inline]

Definition at line 74 of file DDHCalEndcapAlgo.h.

References plastMat.

Referenced by constructInsideModule(), and constructInsideModule0().

{return plastMat;}

double DDHCalEndcapAlgo::getRinBlock1 ( unsigned i ) const [inline]

Definition at line 62 of file DDHCalEndcapAlgo.h.

References i, and rinBlock1.

Referenced by constructInsideSector().

{return rinBlock1[i];}

double DDHCalEndcapAlgo::getRinBlock2 ( unsigned i ) const [inline]

Definition at line 63 of file DDHCalEndcapAlgo.h.

References i, and rinBlock2.

Referenced by constructInsideSector().

{return rinBlock2[i];}

double DDHCalEndcapAlgo::getRinDip ( ) const [inline]

Definition at line 41 of file DDHCalEndcapAlgo.h.

References riDip.

Referenced by constructGeneralVolume(), and constructInsideSector().

{return riDip;}

double DDHCalEndcapAlgo::getRinKink ( ) const [inline]

Definition at line 40 of file DDHCalEndcapAlgo.h.

References riKink.

Referenced by constructGeneralVolume(), and constructInsideSector().

{return riKink;}

std::string DDHCalEndcapAlgo::getRotation ( ) const [inline]

Definition at line 18 of file DDHCalEndcapAlgo.h.

References rotation.

Referenced by constructGeneralVolume().

{return rotation;}

std::string DDHCalEndcapAlgo::getRotMat ( ) const [inline]

Definition at line 76 of file DDHCalEndcapAlgo.h.

References rotmat.

Referenced by constructInsideModule(), and constructInsideModule0().

{return rotmat;}

double DDHCalEndcapAlgo::getRout ( ) const [inline]

Definition at line 39 of file DDHCalEndcapAlgo.h.

References rout.

Referenced by constructGeneralVolume(), and constructInsideSector().

{return rout;}

double DDHCalEndcapAlgo::getRoutBlock1 ( unsigned i ) const [inline]

Definition at line 64 of file DDHCalEndcapAlgo.h.

References i, and routBlock1.

Referenced by constructInsideSector().

{return routBlock1[i];}

double DDHCalEndcapAlgo::getRoutBlock2 ( unsigned i ) const [inline]

Definition at line 65 of file DDHCalEndcapAlgo.h.

References i, and routBlock2.

Referenced by constructInsideModule(), and constructInsideSector().

{return routBlock2[i];}

double DDHCalEndcapAlgo::getRoutDip ( ) const [inline]

Definition at line 42 of file DDHCalEndcapAlgo.h.

References roDip.

Referenced by constructGeneralVolume(), and constructInsideSector().

{return roDip;}

std::string DDHCalEndcapAlgo::getScintMat ( ) const [inline]

Definition at line 75 of file DDHCalEndcapAlgo.h.

References scintMat.

Referenced by constructScintLayer().

{return scintMat;}

double DDHCalEndcapAlgo::getScintT ( unsigned int i ) const [inline]

Definition at line 73 of file DDHCalEndcapAlgo.h.

References i, and scintT.

Referenced by constructInsideModule(), and constructInsideModule0().

{return scintT[i];}

int DDHCalEndcapAlgo::getSectionModule ( unsigned i ) const [inline]

Definition at line 55 of file DDHCalEndcapAlgo.h.

References i, and sectionModule.

Referenced by constructInsideSector().

{return sectionModule[i];}

double DDHCalEndcapAlgo::getSlope ( ) const [inline]

Definition at line 48 of file DDHCalEndcapAlgo.h.

References slope.

Referenced by constructGeneralVolume(), constructInsideModule(), constructInsideModule0(), constructInsideSector(), and parameterLayer0().

{return slope;}

double DDHCalEndcapAlgo::getThick ( unsigned int i ) const [inline]

Definition at line 58 of file DDHCalEndcapAlgo.h.

References i, and thick.

Referenced by constructInsideModule(), and constructInsideModule0().

{return thick[i];}

double DDHCalEndcapAlgo::getTolAbs ( ) const [inline]

Definition at line 78 of file DDHCalEndcapAlgo.h.

References tolAbs.

Referenced by constructInsideModule0().

{return tolAbs;}

double DDHCalEndcapAlgo::getTolPos ( ) const [inline]

Definition at line 77 of file DDHCalEndcapAlgo.h.

References tolPos.

{return tolPos;}

double DDHCalEndcapAlgo::getTrim	(	unsigned int	i,
		unsigned int	j
	)		const

Definition at line 64 of file DDHCalEndcapAlgo.cc.

References i, j, trimLeft, and trimRight.

Referenced by constructInsideModule(), and parameterLayer0().

                                                                     {
 
 if (j == 0)
    return trimLeft[i];
  else
    return trimRight[j];
}

double DDHCalEndcapAlgo::getZ0Beam ( ) const [inline]

Definition at line 32 of file DDHCalEndcapAlgo.h.

References z0Beam.

{return z0Beam;}

double DDHCalEndcapAlgo::getZ1Beam ( ) const [inline]

Definition at line 33 of file DDHCalEndcapAlgo.h.

References z1Beam.

Referenced by constructGeneralVolume(), constructInsideModule(), constructInsideModule0(), constructInsideSector(), and parameterLayer0().

{return z1Beam;}

double DDHCalEndcapAlgo::getZEnd ( ) const [inline]

Definition at line 26 of file DDHCalEndcapAlgo.h.

References zEnd.

Referenced by constructGeneralVolume().

{return zEnd;}

double DDHCalEndcapAlgo::getZFront ( ) const [inline]

Definition at line 25 of file DDHCalEndcapAlgo.h.

References zFront.

Referenced by constructGeneralVolume().

{return zFront;}

double DDHCalEndcapAlgo::getZiBody ( ) const [inline]

Definition at line 29 of file DDHCalEndcapAlgo.h.

References ziBody.

Referenced by constructGeneralVolume().

{return ziBody;}

double DDHCalEndcapAlgo::getZiDip ( ) const [inline]

Definition at line 34 of file DDHCalEndcapAlgo.h.

References ziDip.

Referenced by constructGeneralVolume(), and constructInsideSector().

{return ziDip;}

double DDHCalEndcapAlgo::getZiKink ( ) const [inline]

Definition at line 31 of file DDHCalEndcapAlgo.h.

References ziKink.

Referenced by constructGeneralVolume(), and constructInsideSector().

{return ziKink;}

double DDHCalEndcapAlgo::getZiL0Body ( ) const [inline]

Definition at line 30 of file DDHCalEndcapAlgo.h.

References ziL0Body.

Referenced by constructGeneralVolume().

{return ziL0Body;}

double DDHCalEndcapAlgo::getZiL0Nose ( ) const [inline]

Definition at line 28 of file DDHCalEndcapAlgo.h.

References ziL0Nose.

{return ziL0Nose;}

double DDHCalEndcapAlgo::getZiNose ( ) const [inline]

Definition at line 27 of file DDHCalEndcapAlgo.h.

References ziNose.

{return ziNose;}

double DDHCalEndcapAlgo::getZmaxBlock ( unsigned i ) const [inline]

Definition at line 61 of file DDHCalEndcapAlgo.h.

References i, and zmaxBlock.

Referenced by constructInsideSector(), and parameterLayer0().

{return zmaxBlock[i];}

double DDHCalEndcapAlgo::getZminBlock ( unsigned i ) const [inline]

Definition at line 60 of file DDHCalEndcapAlgo.h.

References i, and zminBlock.

Referenced by constructInsideModule(), constructInsideModule0(), constructInsideSector(), and parameterLayer0().

{return zminBlock[i];}

double DDHCalEndcapAlgo::getZShift ( ) const [inline]

Definition at line 23 of file DDHCalEndcapAlgo.h.

References zShift.

Referenced by constructGeneralVolume().

{return zShift;}

double DDHCalEndcapAlgo::getZShiftHac2 ( ) const [inline]

Definition at line 37 of file DDHCalEndcapAlgo.h.

References zShiftHac2.

Referenced by constructGeneralVolume(), and constructInsideSector().

{return zShiftHac2;}

void DDHCalEndcapAlgo::initialize	(	const DDNumericArguments &	nArgs,
		const DDVectorArguments &	vArgs,
		const DDMapArguments &	mArgs,
		const DDStringArguments &	sArgs,
		const DDStringVectorArguments &	vsArgs
	)

Definition at line 72 of file DDHCalEndcapAlgo.cc.

References absMat, angBot, angGap, angTop, dbl_to_int(), drEnd, dzShift, dzStep, eModule, create_public_lumi_plots::exp, genMaterial, heboxDepth, i, idName, idNameSpace, idOffset, j, layerN, layerN0, layerN1, layerN2, layerN3, layerN4, layerN5, layerName, layers, layerT, layerType, LogDebug, modMat, modName, modType, python::rootplot::argparse::module, modules, nEndcap, DDCurrentNamespace::ns(), nsectors, nsectortot, dbtoconf::parent, phiName, phiSections, plastMat, diffTwoXMLs::r1, riDip, riKink, rinBlock1, rinBlock2, roDip, rotation, rotHalf, rotmat, rotns, rout, routBlock1, routBlock2, scintMat, scintT, sectionModule, funct::sin(), slope, funct::tan(), thick, tolAbs, tolPos, trimLeft, trimRight, z0Beam, z1Beam, zEnd, zFront, ziBody, ziDip, ziKink, ziL0Body, ziL0Nose, ziNose, zmaxBlock, zminBlock, zShift, and zShiftHac2.

                                                                          {

  int i,j;
  genMaterial   = sArgs["MaterialName"];
  rotation      = sArgs["Rotation"];
  nsectors      = int (nArgs["Sector"]);
  nsectortot    = int (nArgs["SectorTot"]);
  nEndcap       = int (nArgs["Endcap"]);
  rotHalf       = sArgs["RotHalf"];
  rotns         = sArgs["RotNameSpace"];
  zShift        = nArgs["ZShift"];

  zFront        = nArgs["ZFront"];
  zEnd          = nArgs["ZEnd"];
  ziNose        = nArgs["ZiNose"];
  ziL0Nose      = nArgs["ZiL0Nose"];
  ziBody        = nArgs["ZiBody"];
  ziL0Body      = nArgs["ZiL0Body"];
  z0Beam        = nArgs["Z0Beam"];
  ziDip         = nArgs["ZiDip"];
  dzStep        = nArgs["DzStep"];
  zShiftHac2    = nArgs["ZShiftHac2"];
  double gap    = nArgs["Gap"];
  double z1     = nArgs["Z1"];
  double r1     = nArgs["R1"];
  rout          = nArgs["Rout"];
  heboxDepth    = nArgs["HEboxDepth"];
  drEnd         = nArgs["DrEnd"];
  double etamin = nArgs["Etamin"];
  angBot        = nArgs["AngBot"];
  angGap        = nArgs["AngGap"];

  LogDebug("HCalGeom") << "DDHCalEndcapAlgo debug: General material " 
                       << genMaterial << "\tSectors "  << nsectors << ",  " 
                       << nsectortot << "\tEndcaps " << nEndcap  
                       << "\tRotation matrix for half " << rotns 
                       << ":" << rotHalf << "\n\tzFront " << zFront << " zEnd "
                       << zEnd << " ziNose " << ziNose << " ziL0Nose " 
                       << ziL0Nose << " ziBody " << ziBody  << " ziL0Body " 
                       << ziL0Body << " z0Beam " << z0Beam << " ziDip " 
                       << ziDip << " dzStep " << dzStep << " Gap " << gap 
                       << " z1 " << z1 << "\n\tr1 " << r1 << " rout " << rout
                       << " HeboxDepth " << heboxDepth << " drEnd " << drEnd 
                       << "\tetamin " << etamin << " Bottom angle " << angBot
                       << " Gap angle " << angGap << " Z-Shift " << zShift
                       << " " << zShiftHac2;

  //Derived quantities
  angTop   = 2.0 * atan (exp(-etamin));
  slope    = tan(angGap);
  z1Beam   = z1 - r1/slope;
  ziKink   = z1Beam + rout/slope;
  riKink   = ziKink*tan(angBot);
  riDip    = ziDip*tan(angBot);
  roDip    = rout - heboxDepth;
  dzShift  = (z1Beam - z0Beam) - gap/sin(angGap);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo debug: angTop " 
                       << angTop/CLHEP::deg  <<"\tSlope " << slope 
                       << "\tDzShift " << dzShift << "\n\tz1Beam " << z1Beam 
                       << "\tziKink" << ziKink << "\triKink " << riKink 
                       << "\triDip " << riDip << "\n\troDip " << roDip 
                       << "\tRotation " << rotation;

  //Modules
  absMat        = sArgs["AbsMat"];
  modules       = int(nArgs["Modules"]);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo debug: Number of modules " 
                       << modules << " and absorber material " << absMat;

  modName       = vsArgs["ModuleName"];
  modMat        = vsArgs["ModuleMat"];
  modType       = dbl_to_int(vArgs["ModuleType"]);
  sectionModule = dbl_to_int(vArgs["SectionModule"]);
  thick         = vArgs["ModuleThick"];
  trimLeft      = vArgs["TrimLeft"]; 
  trimRight     = vArgs["TrimRight"]; 
  eModule       = dbl_to_int(vArgs["EquipModule"]);
  layerN        = dbl_to_int(vArgs["LayerN"]);
  layerN0       = dbl_to_int(vArgs["LayerN0"]);
  layerN1       = dbl_to_int(vArgs["LayerN1"]);
  layerN2       = dbl_to_int(vArgs["LayerN2"]);
  layerN3       = dbl_to_int(vArgs["LayerN3"]);
  layerN4       = dbl_to_int(vArgs["LayerN4"]);
  layerN5       = dbl_to_int(vArgs["LayerN5"]);
  for (i = 0; i < modules; i++) {
    LogDebug("HCalGeom") << "DDHCalEndcapAlgo debug: " << modName[i] <<" type "
                         << modType[i] << " Sections " << sectionModule[i] 
                         << " thickness of absorber/air " << thick[i] 
                         << " trim " << trimLeft[i] << ", " << trimRight[i] 
                         << " equip module " << eModule[i] << " with "
                         << layerN[i] << " layers";
    if (i == 0) {
      for (j = 0; j < layerN[i]; j++) {
        LogDebug("HCalGeom") << "\t " << layerN0[j] << "/" << layerN0[j+1];
      }
    } else if (i == 1) {
      for (j = 0; j < layerN[i]; j++) {
        LogDebug("HCalGeom") << "\t " << layerN1[j] << "/" << layerN1[j+1];
      }
    } else if (i == 2) {
      for (j = 0; j < layerN[i]; j++) {
        LogDebug("HCalGeom") << "\t " << layerN2[j];
      }
    } else if (i == 3) {
      for (j = 0; j < layerN[i]; j++) {
        LogDebug("HCalGeom") << "\t " << layerN3[j];
      }
    } else if (i == 4) {
      for (j = 0; j < layerN[i]; j++) {
        LogDebug("HCalGeom") << "\t " << layerN4[j];
      }
    } else if (i == 5) {
      for (j = 0; j < layerN[i]; j++) {
        LogDebug("HCalGeom") << "\t " << layerN5[j];
      }
    }
  }
  
  //Layers
  phiSections = int(nArgs["PhiSections"]);
  phiName     = vsArgs["PhiName"];
  layers      = int(nArgs["Layers"]);
  layerName   = vsArgs["LayerName"];
  layerType   = dbl_to_int(vArgs["LayerType"]);
  layerT      = vArgs["LayerT"];
  scintT      = vArgs["ScintT"];
  scintMat    = sArgs["ScintMat"];
  plastMat    = sArgs["PlastMat"];
  rotmat      = sArgs["RotMat"];
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo debug: Phi Sections " 
                       << phiSections;
  for (i = 0; i < phiSections; i++) 
    LogDebug("HCalGeom") << "\tName[" << i << "] : " << phiName[i];
  LogDebug("HCalGeom") << "\tPlastic: " << plastMat << "\tScintillator: "
                       << scintMat << "\tRotation matrix " << rotns << ":" 
                       << rotmat << "\n\tNumber of layers " << layers;
  for (i = 0; i < layers; i++) {
    LogDebug("HCalGeom") << "\t" << layerName[i] << "\tType " << layerType[i]
                         << "\tThickness " << layerT[i] << "\tScint.Thick " 
                         << scintT[i];
  }

  // Derive bounding of the modules
  int module = 0;
  // Layer 0 (Nose)
  if (modules > 0) {
    zminBlock.push_back(ziL0Nose);
    zmaxBlock.push_back(zminBlock[module] + layerT[0] + 0.5*dzStep);
    rinBlock1.push_back(zminBlock[module] * tan(angTop));
    rinBlock2.push_back(zmaxBlock[module] * tan(angTop));
    routBlock1.push_back((zminBlock[module] - z1Beam) * slope);
    routBlock2.push_back((zmaxBlock[module] - z1Beam) * slope);
    module++;
  }

  // Layer 0 (Body)
  if (modules > 1) {
    zminBlock.push_back(ziL0Body);
    zmaxBlock.push_back(zminBlock[module] + layerT[0] + 0.5*dzStep);
    rinBlock1.push_back(zminBlock[module] * tan(angBot));
    rinBlock2.push_back(zmaxBlock[module] * tan(angBot));
    routBlock1.push_back(zminBlock[module] * tan(angTop));
    routBlock2.push_back(zmaxBlock[module] * tan(angTop));
    module++;
  }

  // Hac1
  if (modules > 2) {
    zminBlock.push_back(ziNose);
    zmaxBlock.push_back(ziBody);
    rinBlock1.push_back(zminBlock[module] * tan(angTop));
    rinBlock2.push_back(zmaxBlock[module] * tan(angTop));
    routBlock1.push_back((zminBlock[module] - z1Beam) * slope);
    routBlock2.push_back((zmaxBlock[module] - z1Beam) * slope);
    module++;
  }

  // Hac2
  if (modules > 3) {
    zminBlock.push_back(ziBody);
    zmaxBlock.push_back(zminBlock[module] + layerN[3]*dzStep);
    rinBlock1.push_back(zminBlock[module] * tan(angBot));
    rinBlock2.push_back(zmaxBlock[module] * tan(angBot));
    routBlock1.push_back((zmaxBlock[module-1] - z1Beam) * slope);
    routBlock2.push_back(rout);
    module++;
  }

  // Hac3
  if (modules > 4) {
    zminBlock.push_back(zmaxBlock[module-1]);
    zmaxBlock.push_back(zminBlock[module] + layerN[4]*dzStep);
    rinBlock1.push_back(zminBlock[module] * tan(angBot));
    rinBlock2.push_back(zmaxBlock[module] * tan(angBot));
    routBlock1.push_back(rout);
    routBlock2.push_back(rout);
    module++;
  }

  // Hac4
  if (modules > 5) {
    zminBlock.push_back(zmaxBlock[module-1]);
    zmaxBlock.push_back(zminBlock[module] + layerN[5]*dzStep);
    rinBlock1.push_back(zminBlock[module] * tan(angBot));
    rinBlock2.push_back(zmaxBlock[module] * tan(angBot));
    routBlock1.push_back(rout);
    routBlock2.push_back(roDip);
    module++;
  }

  for (i = 0; i < module; i++)
    LogDebug("HCalGeom") << "DDHCalEndcapAlgo debug: Module " << i 
                         << "\tZ/Rin/Rout " << zminBlock[i] << ", " 
                         << zmaxBlock[i] << "/ " << rinBlock1[i] << ", " 
                         << rinBlock2[i] << "/ " << routBlock1[i] << ", " 
                         << routBlock2[i];

  idName      = sArgs["MotherName"];
  idNameSpace = DDCurrentNamespace::ns();
  idOffset = int (nArgs["IdOffset"]); 
  DDName parentName = parent().name(); 
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo debug: Parent " << parentName 
                       << " idName " << idName << " NameSpace " << idNameSpace
                       << " Offset " << idOffset;

  tolPos      = nArgs["TolPos"];
  tolAbs      = nArgs["TolAbs"];
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo debug: Tolerances - Positioning "
                       << tolPos << " Absorber " << tolAbs;
}

void DDHCalEndcapAlgo::parameterLayer	(	int	iphi,
		double	rinF,
		double	routF,
		double	rinB,
		double	routB,
		double	zi,
		double	zo,
		double &	yh1,
		double &	bl1,
		double &	tl1,
		double &	yh2,
		double &	bl2,
		double &	tl2,
		double &	alp,
		double &	theta,
		double &	phi,
		double &	xpos,
		double &	ypos,
		double &	zcpv
	)		`[protected]`

Definition at line 641 of file DDHCalEndcapAlgo.cc.

References alpha, getNsectors(), LogDebug, pi, alignCSCRings::r, mathSSE::sqrt(), and funct::tan().

Referenced by constructInsideModule(), and constructInsideModule0().

                                                    {

  //Given rin, rout compute parameters of the trapezoid and 
  //position of the trapezoid for a standrd layer
  double alpha = CLHEP::pi/getNsectors();
  LogDebug("HCalGeom") << "Input " << iphi << " Front " << rinF << " " << routF
                       << " " << zi << " Back " << rinB << " " << routB << " "
                       << zo << " Alpha " << alpha/CLHEP::deg;

  yh1 = 0.5 * (routF - rinB);
  bl1 = 0.5 * rinB  * tan(alpha);
  tl1 = 0.5 * routF * tan(alpha);
  yh2 = 0.5 * (routF - rinB);
  bl2 = 0.5 * rinB  * tan(alpha);
  tl2 = 0.5 * routF * tan(alpha);
  double dx  = 0.25* (bl2+tl2-bl1-tl1);
  double dy  = 0.5 * (rinB+routF-rinB-routF);
  xpos = 0.25*(rinB+routF+rinB+routF);
  ypos = 0.25*(bl2+tl2+bl1+tl1);
  zpos = 0.5*(zi+zo);
  alp  = atan(0.5 * tan(alpha));
  //  ypos-= getTolPos();
  if (iphi == 0) {
    ypos  = -ypos;
  } else {
    alp  = -alp;
    dx   = -dx;
  }
  double r   = sqrt (dx*dx + dy*dy);
  theta= atan (r/(zo-zi));
  phi  = atan2 (dy, dx);
  LogDebug("HCalGeom") << "Output Dimensions " << yh1 << " " << bl1 << " "
                       << tl1 << " " << yh2 << " " << bl2 << " " << tl2
                       << " " << alp/CLHEP::deg << " " << theta/CLHEP::deg
                       << " " << phi/CLHEP::deg << " Position " << xpos << " "
                       << ypos << " " << zpos;
}

void DDHCalEndcapAlgo::parameterLayer0	(	int	mod,
		int	layer,
		int	iphi,
		double &	yh,
		double &	bl,
		double &	tl,
		double &	alp,
		double &	xpos,
		double &	ypos,
		double &	zcpv
	)		`[protected]`

Definition at line 593 of file DDHCalEndcapAlgo.cc.

References alpha, getAngBot(), getAngTop(), getLayerT(), getNsectors(), getSlope(), getTrim(), getZ1Beam(), getZmaxBlock(), getZminBlock(), LogDebug, pi, rout, and funct::tan().

Referenced by constructInsideModule0().

                                                     {

  //Given module and layer number compute parameters of trapezoid
  //and positioning parameters
  double alpha = CLHEP::pi/getNsectors();
  LogDebug("HCalGeom") << "Input " << iphi << " " << layer << " " << iphi
                       << " Alpha " << alpha/CLHEP::deg;

  double zi, zo;
  if (iphi == 0) {
    zi = getZminBlock(mod);
    zo = zi + getLayerT(layer);
  } else {
    zo = getZmaxBlock(mod);
    zi = zo - getLayerT(layer);
  }
  double rin, rout;
  if (mod == 0) {
    rin  = zo * tan(getAngTop());
    rout = (zi - getZ1Beam()) * getSlope();
  } else {
    rin  = zo * tan(getAngBot());
    rout = zi * tan(getAngTop());
  }
  yh   = 0.5 * (rout - rin);
  bl   = 0.5 * rin * tan (alpha);
  tl   = 0.5 * rout * tan(alpha);
  xpos = 0.5 * (rin + rout);
  ypos = 0.5 * (bl + tl);
  zpos = 0.5 * (zi + zo);
  yh  -= getTrim(mod,iphi);
  bl  -= getTrim(mod,iphi);
  tl  -= getTrim(mod,iphi);
  alp  = atan(0.5 * tan(alpha));
  if (iphi == 0) {
    ypos  = -ypos;
  } else {
    alp  = -alp;
  }
  LogDebug("HCalGeom") << "Output Dimensions " << yh << " " << bl << " "
                       << tl << " " << alp/CLHEP::deg << " Position " << xpos 
                       << " " << ypos << " " << zpos;
}