#include <EESelectiveReadoutTask.h>

Inheritance diagram for EESelectiveReadoutTask:

Public Member Functions
	EESelectiveReadoutTask (const edm::ParameterSet &ps)
	Constructor.
virtual	~EESelectiveReadoutTask ()
	Destructor.
Protected Member Functions
void	analyze (const edm::Event &e, const edm::EventSetup &c)
	Analyze.
void	beginJob (void)
	BeginJob.
void	beginRun (const edm::Run &r, const edm::EventSetup &c)
	BeginRun.
void	cleanup (void)
	Cleanup.
void	endJob (void)
	EndJob.
void	endRun (const edm::Run &r, const edm::EventSetup &c)
	EndRun.
void	reset (void)
	Reset.
void	setup (void)
	Setup.
Protected Attributes
int	nCrySC [20][20][2]
	To store the readout crystals / SC.
int	nCryTT [108][41]
int	nEvtAnyInterest [100][100][2]
	To store the events with any interest.
int	nEvtAnyReadout [20][20][2]
	To store the events with any readout.
int	nEvtCompleteReadoutIfZS [20][20][2]
	To store the events with complete readout when ZS is requested.
int	nEvtDroppedReadoutIfFR [20][20][2]
	To store the events with 0 channels readout when FR is requested.
int	nEvtFullReadout [20][20][2]
	To store the events with full readout.
int	nEvtHighInterest [100][100][2]
	To store the events with high interest TT.
int	nEvtLowInterest [100][100][2]
	To store the events with low interest TT.
int	nEvtMediumInterest [100][100][2]
	To store the events with medium interest TT.
int	nEvtRUForced [20][20][2]
	To store the events with RU forced.
int	nEvtZS1Readout [20][20][2]
	To store the events with ZS1 readout.
int	nEvtZSReadout [20][20][2]
	To store the events with ZS1 or ZS2 readout.
Static Protected Attributes
static const int	bytesPerCrystal = 24
	Number of bytes per crystal.
static const int	kByte = 1024
static const int	nDccChs = 68
	maximum number of RUs read by a DCC
static const int	nEBDcc = 36
static const int	nECALDcc = 54
	Constants.
static const int	nEEDcc = 18
static const int	nEeRus = 2*(34+32+33+33+32+34+33+34+33)
	number of RUs for EE
static const int	nEeX = 100
	EE crystal grid size along X.
static const int	nEeY = 100
	EE crystal grid size along Y.
static const int	nEndcaps = 2
	number of endcaps
static const int	nTtEta = 56
	Number of Trigger Towers along Eta.
static const int	nTtPhi = 72
	Number of Trigger Towers along Phi.
static const int	scEdge = 5
	Number of crystals along a supercrystal edge.
Private Types
enum	subdet_t { EB, EE }
	distinguishes barral and endcap of ECAL. More...
Private Member Functions
void	anaDigi (const EEDataFrame &frame, const EESrFlagCollection &srFlagColl, uint16_t statusCode)
void	anaDigiInit ()
int	cIndex2iXY (int iX0) const
void	configFirWeights (std::vector< double > weightsForZsFIR)
int	dccIndex (int iDet, int i, int j) const
unsigned	dccNum (const DetId &xtalId) const
unsigned	dccNumOfRU (const EcalScDetId &scId) const
int	dccPhiIndex (int i, int j) const
int	dccPhiIndexOfRU (int i, int j) const
int	getCrystalCount (int iDcc, int iDccCh)
double	getDccEventSize (int iDcc0, double nReadXtals) const
double	getDccOverhead (subdet_t subdet) const
double	getEeEventSize (double nReadXtals) const
int	iXY2cIndex (int iX) const
const EcalScDetId	readOutUnitOf (const EEDetId &xtalId) const
Static Private Member Functions
static int	dccZsFIR (const EcalDataFrame &frame, const std::vector< int > &firWeights, int firstFIRSample, bool *saturated=0)
static std::vector< int >	getFIRWeights (const std::vector< double > &normalizedWeights)
Private Attributes
DQMStore *	dqmStore_
edm::InputTag	EcalRecHitCollection_
edm::InputTag	EcalTrigPrimDigiCollection_
MonitorElement *	EECompleteZSCount_ [2]
MonitorElement *	EECompleteZSMap_ [2]
MonitorElement *	EEDccEventSize_
MonitorElement *	EEDccEventSizeMap_
edm::InputTag	EEDigiCollection_
MonitorElement *	EEDroppedFRCount_ [2]
MonitorElement *	EEDroppedFRMap_ [2]
MonitorElement *	EEEventSize_ [2]
MonitorElement *	EEFullReadoutSRFlagCount_ [2]
MonitorElement *	EEFullReadoutSRFlagMap_ [2]
MonitorElement *	EEHighInterestPayload_ [2]
MonitorElement *	EEHighInterestTriggerTowerFlagMap_ [2]
MonitorElement *	EEHighInterestZsFIR_ [2]
MonitorElement *	EELowInterestPayload_ [2]
MonitorElement *	EELowInterestTriggerTowerFlagMap_ [2]
MonitorElement *	EELowInterestZsFIR_ [2]
MonitorElement *	EEMediumInterestTriggerTowerFlagMap_ [2]
MonitorElement *	EEReadoutUnitForcedBitMap_ [2]
bool	eeRuActive_ [nEndcaps][nEeX/scEdge][nEeY/scEdge]
edm::InputTag	EESRFlagCollection_
MonitorElement *	EETowerSize_ [2]
MonitorElement *	EETTFlags_ [2]
MonitorElement *	EETTFMismatch_ [2]
edm::InputTag	EEUnsuppressedDigiCollection_
MonitorElement *	EEZeroSuppression1SRFlagMap_ [2]
bool	enableCleanup_
edm::InputTag	FEDRawDataCollection_
int	firstFIRSample_
std::vector< int >	firWeights_
int	ievt_
bool	init_
bool	mergeRuns_
int	nEe_ [2]
int	nEeHI_ [2]
int	nEeLI_ [2]
int	nPerDcc_ [nECALDcc]
int	nPerRu_ [nECALDcc][nDccChs]
int	nRuPerDcc_ [nECALDcc]
std::string	prefixME_
const EcalSRSettings *	settings_
bool	useCondDb_
float	xbins [19]
float	ybins [133]

Detailed Description

Definition at line 46 of file EESelectiveReadoutTask.h.

Member Enumeration Documentation

enum EESelectiveReadoutTask::subdet_t [private]

distinguishes barral and endcap of ECAL.

Enumerator:

EB
EE

Definition at line 159 of file EESelectiveReadoutTask.h.

{EB, EE};

Constructor & Destructor Documentation

EESelectiveReadoutTask::EESelectiveReadoutTask ( const edm::ParameterSet & ps )

Constructor.

Definition at line 44 of file EESelectiveReadoutTask.cc.

References configFirWeights(), dqmStore_, EcalTrigPrimDigiCollection_, EECompleteZSCount_, EECompleteZSMap_, EEDccEventSize_, EEDccEventSizeMap_, EEDigiCollection_, EEDroppedFRCount_, EEDroppedFRMap_, EEEventSize_, EEFullReadoutSRFlagCount_, EEFullReadoutSRFlagMap_, EEHighInterestPayload_, EEHighInterestTriggerTowerFlagMap_, EEHighInterestZsFIR_, EELowInterestPayload_, EELowInterestTriggerTowerFlagMap_, EELowInterestZsFIR_, EEMediumInterestTriggerTowerFlagMap_, EEReadoutUnitForcedBitMap_, EESRFlagCollection_, EETowerSize_, EETTFlags_, EETTFMismatch_, EEUnsuppressedDigiCollection_, EEZeroSuppression1SRFlagMap_, enableCleanup_, FEDRawDataCollection_, firstFIRSample_, edm::ParameterSet::getParameter(), edm::ParameterSet::getUntrackedParameter(), i, init_, mergeRuns_, cppFunctionSkipper::operator, prefixME_, useCondDb_, xbins, and ybins.

                                                                       {

  init_ = false;

  dqmStore_ = edm::Service<DQMStore>().operator->();

  prefixME_ = ps.getUntrackedParameter<std::string>("prefixME", "");

  enableCleanup_ = ps.getUntrackedParameter<bool>("enableCleanup", false);

  mergeRuns_ = ps.getUntrackedParameter<bool>("mergeRuns", false);

  // parameters...
  EEDigiCollection_ = ps.getParameter<edm::InputTag>("EEDigiCollection");
  EEUnsuppressedDigiCollection_ = ps.getParameter<edm::InputTag>("EEUsuppressedDigiCollection");
  EESRFlagCollection_ = ps.getParameter<edm::InputTag>("EESRFlagCollection");
  EcalTrigPrimDigiCollection_ = ps.getParameter<edm::InputTag>("EcalTrigPrimDigiCollection");
  FEDRawDataCollection_ = ps.getParameter<edm::InputTag>("FEDRawDataCollection");
  firstFIRSample_ = ps.getParameter<int>("ecalDccZs1stSample");

  useCondDb_ = ps.getParameter<bool>("configFromCondDB");
  if(!useCondDb_) configFirWeights(ps.getParameter<std::vector<double> >("dccWeights"));

  // histograms...
  EEDccEventSize_ = 0;
  EEDccEventSizeMap_ = 0;

  for(int i=0; i<2; i++) {
    EETowerSize_[i] = 0;
    EETTFMismatch_[i] = 0;
    EEReadoutUnitForcedBitMap_[i] = 0;
    EEFullReadoutSRFlagMap_[i] = 0;
    EEFullReadoutSRFlagCount_[i] = 0;
    EEZeroSuppression1SRFlagMap_[i] = 0;  
    EEHighInterestTriggerTowerFlagMap_[i] = 0;
    EEMediumInterestTriggerTowerFlagMap_[i] = 0;
    EELowInterestTriggerTowerFlagMap_[i] = 0;
    EETTFlags_[i] = 0;
    EECompleteZSMap_[i] = 0;
    EECompleteZSCount_[i] = 0;
    EEDroppedFRMap_[i] = 0;
    EEDroppedFRCount_[i] = 0;
    EEEventSize_[i] = 0;
    EEHighInterestPayload_[i] = 0;
    EELowInterestPayload_[i] = 0;
    EEHighInterestZsFIR_[i] = 0;
    EELowInterestZsFIR_[i] = 0;
  }

  // initialize variable binning for DCC size...
  float ZSthreshold = 0.608; // kBytes of 1 TT fully readout
  float zeroBinSize = ZSthreshold / 20.;
  for(int i=0; i<20; i++) ybins[i] = i*zeroBinSize;
  for(int i=20; i<133; i++) ybins[i] = ZSthreshold * (i-19);
  for(int i=0; i<=18; i++) xbins[i] = i+1;

}

EESelectiveReadoutTask::~EESelectiveReadoutTask ( ) [virtual]

Destructor.

Definition at line 102 of file EESelectiveReadoutTask.cc.

                                                {

}

Member Function Documentation

void EESelectiveReadoutTask::anaDigi	(	const EEDataFrame &	frame,
		const EESrFlagCollection &	srFlagColl,
		uint16_t	statusCode
	)		`[private]`

Accumulates statitics for data volume analysis. To be called for each ECAL digi. See anaDigiInit().

Definition at line 977 of file EESelectiveReadoutTask.cc.

References dccNum(), dccZsFIR(), EcalEndcap, EEHighInterestZsFIR_, EELowInterestZsFIR_, eeRuActive_, edm::SortedCollection< T, SORT >::end(), Reference_intrackfit_cff::endcap, MonitorElement::Fill(), edm::SortedCollection< T, SORT >::find(), firstFIRSample_, firWeights_, EEDataFrame::id(), Numbers::iSC(), Numbers::iSM(), ecalpyutils::ism(), Numbers::iTCC(), Numbers::iTT(), iXY2cIndex(), nCrySC, nCryTT, nEe_, nEeHI_, nEeLI_, nPerDcc_, nPerRu_, nRuPerDcc_, readOutUnitOf(), scEdge, and EcalSrFlag::SRF_FULL.

Referenced by analyze().

                                                                                                                       {
  
  EEDetId id = frame.id();
  int ism = Numbers::iSM( id );

  bool endcap = (id.subdetId()==EcalEndcap);

  if(endcap) {
    if ( ism >= 1 && ism <= 9 ) {
      ++nEe_[0];
    } else {
      ++nEe_[1];
    }

    int ix = id.ix();
    int iy = id.iy();

    int iX0 = iXY2cIndex(ix);
    int iY0 = iXY2cIndex(iy);
    int iZ0 = id.zside()>0?1:0;

    if(!eeRuActive_[iZ0][iX0/scEdge][iY0/scEdge]){
      ++nRuPerDcc_[dccNum(id)];
      eeRuActive_[iZ0][iX0/scEdge][iY0/scEdge] = true;
    }

    EESrFlagCollection::const_iterator srf = srFlagColl.find(readOutUnitOf(id));

    if(srf == srFlagColl.end()){
      return;
    }

    int ttix = srf->id().ix();
    int ttiy = srf->id().iy();

    int zside = srf->id().zside();

    int ttiz = ( zside < 0 ) ? 0 : 1;

    nCrySC[ttix-1][ttiy-1][ttiz]++;

    int itcc = Numbers::iTCC( ism, EcalEndcap, ix, iy );
    int itt = Numbers::iTT( ism, EcalEndcap, ix, iy );
    nCryTT[itcc-1][itt-1]++;

    bool highInterest = ((srf->value() & ~EcalSrFlag::SRF_FORCED_MASK)
                         == EcalSrFlag::SRF_FULL);

    int dccZsFIRval = dccZsFIR(frame, firWeights_, firstFIRSample_, 0);

    if ( ism >= 1 && ism <= 9 ) {
      if(highInterest) {
        ++nEeHI_[0];
        // if(statusCode != 9) EEHighInterestZsFIR_[0]->Fill( dccZsFIRval );
        EEHighInterestZsFIR_[0]->Fill( dccZsFIRval );
      } else{ //low interest
        ++nEeLI_[0];
        // if(statusCode != 9) EELowInterestZsFIR_[0]->Fill( dccZsFIRval );
        EELowInterestZsFIR_[0]->Fill( dccZsFIRval );
      }
    } else {
      if(highInterest) {
        ++nEeHI_[1];
        EEHighInterestZsFIR_[1]->Fill( dccZsFIRval );
      } else{ //low interest
        ++nEeLI_[1];
        EELowInterestZsFIR_[1]->Fill( dccZsFIRval );
      }
    }
    int isc = Numbers::iSC( ism, EcalEndcap, ix, iy );
    ++nPerDcc_[dccNum(id)-1];
    ++nPerRu_[dccNum(id)-1][isc];
  }
  
}

void EESelectiveReadoutTask::anaDigiInit ( ) [private]

Initializes statistics accumalator for data volume analysis. To be call at start of each event analysis.

Definition at line 1053 of file EESelectiveReadoutTask.cc.

References eeRuActive_, nCrySC, nCryTT, nDccChs, nECALDcc, nEe_, nEeHI_, nEeLI_, nPerDcc_, nPerRu_, and nRuPerDcc_.

Referenced by analyze().

                                        {
  nEe_[0] = 0;
  nEeLI_[0] = 0;
  nEeHI_[0] = 0;
  nEe_[1] = 0;
  nEeLI_[1] = 0;
  nEeHI_[1] = 0;
  bzero(nPerDcc_, sizeof(nPerDcc_));
  bzero(nRuPerDcc_, sizeof(nRuPerDcc_));
  bzero(eeRuActive_, sizeof(eeRuActive_));

  for(int idcc=0; idcc<nECALDcc; idcc++) {
    for(int isc=0; isc<nDccChs; isc++) {
      nPerRu_[idcc][isc] = 0;
    }
  }

  for(int iz = 0; iz<2; iz++) {
    for(int ix = 0; ix < 20; ix++ ) {
      for(int iy = 0; iy < 20; iy++ ) {
        nCrySC[ix][iy][iz] = 0;
      }
    }
  }

  for (int itcc = 0; itcc < 108; itcc++) {
    for (int itt = 0; itt < 41; itt++) nCryTT[itcc][itt] = 0;
  }

}

void EESelectiveReadoutTask::analyze	(	const edm::Event &	e,
		const edm::EventSetup &	c
	)		`[protected, virtual]`

Analyze.

Implements edm::EDAnalyzer.

Definition at line 587 of file EESelectiveReadoutTask.cc.

References anaDigi(), anaDigiInit(), bytesPerCrystal, Numbers::crystals(), dccNumOfRU(), EcalEndcap, EcalTrigPrimDigiCollection_, EECompleteZSCount_, EECompleteZSMap_, EEDccEventSize_, EEDccEventSizeMap_, EEDigiCollection_, EEDroppedFRCount_, EEDroppedFRMap_, EEEventSize_, EEFullReadoutSRFlagCount_, EEFullReadoutSRFlagMap_, EEHighInterestPayload_, EEHighInterestTriggerTowerFlagMap_, EELowInterestPayload_, EELowInterestTriggerTowerFlagMap_, EEMediumInterestTriggerTowerFlagMap_, EEReadoutUnitForcedBitMap_, EESRFlagCollection_, EETowerSize_, EETTFlags_, EETTFMismatch_, EEZeroSuppression1SRFlagMap_, error, FEDRawDataCollection_, MonitorElement::Fill(), HcalObjRepresent::Fill(), edm::EventSetup::get(), edm::Event::getByLabel(), getCrystalCount(), getEeEventSize(), EcalCondObjectContainer< T >::getMap(), EcalChannelStatusCode::getStatusCode(), MonitorElement::getTH2F(), i, EEDataFrame::id(), ievt_, init_, Numbers::iSC(), Numbers::iSM(), ecalpyutils::ism(), Numbers::iTCC(), Numbers::iTT(), EEDetId::ix(), EcalScDetId::ix(), kByte, nCrySC, nCryTT, nEe_, nEeHI_, nEeLI_, nEvtAnyInterest, nEvtAnyReadout, nEvtCompleteReadoutIfZS, nEvtDroppedReadoutIfFR, nEvtFullReadout, nEvtHighInterest, nEvtLowInterest, nEvtMediumInterest, nEvtRUForced, nEvtZS1Readout, nEvtZSReadout, nPerRu_, edm::ESHandle< T >::product(), MonitorElement::setBinContent(), MonitorElement::setBinError(), setup(), findQualityFiles::size, mathSSE::sqrt(), EcalSrFlag::SRF_FORCED_MASK, EcalSrFlag::SRF_FULL, EcalSrFlag::SRF_ZS1, EcalSrFlag::SRF_ZS2, ntuplemaker::status, Numbers::subDet(), and ecalTPGAnalyzer_cfg::TPCollection.

                                                                             {

  if ( ! init_ ) this->setup();

  ievt_++;

  edm::Handle<FEDRawDataCollection> raw;
  if ( e.getByLabel(FEDRawDataCollection_, raw) ) {

    int EEFirstFED[2];
    EEFirstFED[0] = 601; // EE-
    EEFirstFED[1] = 646; // EE+
    for(int zside=0; zside<2; zside++) {

      int firstFedOnSide=EEFirstFED[zside];

      for ( int iDcc = 0; iDcc < 9; ++iDcc ) {

        int ism = 0;
        if ( zside == 0 ) ism = iDcc+1;
        else ism = 10+iDcc;

        EEDccEventSize_->Fill( ism, ((double)raw->FEDData(firstFedOnSide+iDcc).size())/kByte );
        EEDccEventSizeMap_->Fill( ism, ((double)raw->FEDData(firstFedOnSide+iDcc).size())/kByte );

      }
    }

  } else {
    edm::LogWarning("EESelectiveReadoutTask") << FEDRawDataCollection_ << " not available";
  }

  // Selective Readout Flags
  int nFRO[2], nCompleteZS[2], nDroppedFRO[2];
  nFRO[0] = nFRO[1] = 0;
  nCompleteZS[0] = nCompleteZS[1] = 0;
  nDroppedFRO[0] = nDroppedFRO[1] = 0;
  edm::Handle<EESrFlagCollection> eeSrFlags;
  if ( e.getByLabel(EESRFlagCollection_,eeSrFlags) ) {

    // Data Volume
    double aLowInterest[2];
    double aHighInterest[2];
    double aAnyInterest[2];

    aLowInterest[0]=0;
    aHighInterest[0]=0;
    aAnyInterest[0]=0;
    aLowInterest[1]=0;
    aHighInterest[1]=0;
    aAnyInterest[1]=0;

    edm::Handle<EEDigiCollection> eeDigis;
    if ( e.getByLabel(EEDigiCollection_ , eeDigis) ) {

      anaDigiInit();

      // channel status
      edm::ESHandle<EcalChannelStatus> pChannelStatus;
      c.get<EcalChannelStatusRcd>().get(pChannelStatus);
      const EcalChannelStatus* chStatus = pChannelStatus.product();  

      for (unsigned int digis=0; digis<eeDigis->size(); ++digis) {
        EEDataFrame eedf = (*eeDigis)[digis];
        EEDetId id = eedf.id();
        EcalChannelStatusMap::const_iterator chit;
        chit = chStatus->getMap().find(id.rawId());
        uint16_t statusCode = 0;
        if( chit != chStatus->getMap().end() ) {
          EcalChannelStatusCode ch_code = (*chit);
          statusCode = ch_code.getStatusCode();
        }
        anaDigi(eedf, *eeSrFlags, statusCode);
      }

      //low interest channels:
      aLowInterest[0] = nEeLI_[0]*bytesPerCrystal/kByte;
      EELowInterestPayload_[0]->Fill(aLowInterest[0]);
      aLowInterest[1] = nEeLI_[1]*bytesPerCrystal/kByte;
      EELowInterestPayload_[1]->Fill(aLowInterest[1]);

      //low interest channels:
      aHighInterest[0] = nEeHI_[0]*bytesPerCrystal/kByte;
      EEHighInterestPayload_[0]->Fill(aHighInterest[0]);
      aHighInterest[1] = nEeHI_[1]*bytesPerCrystal/kByte;
      EEHighInterestPayload_[1]->Fill(aHighInterest[1]);

      //any-interest channels:
      aAnyInterest[0] = getEeEventSize(nEe_[0])/kByte;
      EEEventSize_[0]->Fill(aAnyInterest[0]);
      aAnyInterest[1] = getEeEventSize(nEe_[1])/kByte;
      EEEventSize_[1]->Fill(aAnyInterest[1]);

      //event size by tower:
      for(int ix = 0; ix < 20; ix++ ) {
        for(int iy = 0; iy < 20; iy++ ) {
          for(int iz = 0; iz < 2; iz++) {

            double towerSize =  nCrySC[ix][iy][iz] * bytesPerCrystal;

            float xix = ix;
            if ( iz == 0 ) xix = 19 - xix;
            xix += 0.5;

            float xiy = iy+0.5;

            EETowerSize_[iz]->Fill(xix, xiy, towerSize);

          }
        }
      }

    } else {
      edm::LogWarning("EESelectiveReadoutTask") << EEDigiCollection_ << " not available";
    }

    // initialize dcchs_ to mask disabled towers
    std::map< int, std::vector<short> > towersStatus;
    edm::Handle<EcalRawDataCollection> dcchs;

    if( e.getByLabel(FEDRawDataCollection_, dcchs) ) {
      for ( EcalRawDataCollection::const_iterator dcchItr = dcchs->begin(); dcchItr != dcchs->end(); ++dcchItr ) {
        if ( Numbers::subDet( *dcchItr ) != EcalEndcap ) continue;
        int ism = Numbers::iSM( *dcchItr, EcalEndcap );
        towersStatus.insert(std::make_pair(ism, dcchItr->getFEStatus()));
      }
    }

    for ( EESrFlagCollection::const_iterator it = eeSrFlags->begin(); it != eeSrFlags->end(); ++it ) {

      EcalScDetId id = it->id();

      if ( Numbers::subDet( id ) != EcalEndcap ) continue;

      int ix = id.ix();
      int iy = id.iy();
      int iDcc = dccNumOfRU(id);
      int ism = Numbers::iSM( id );
      int isc = Numbers::iSC( id );

      int zside = id.zside();

      int iz = ( zside < 0 ) ? 0 : 1;

      if ( zside < 0 ) ix = 21 - ix;

      nEvtAnyReadout[ix-1][iy-1][iz]++;

      int flag = it->value() & ~EcalSrFlag::SRF_FORCED_MASK;

      int status=0;
      if( towersStatus[ism].size() > 0 ) status = (towersStatus[ism])[isc];

      if(flag == EcalSrFlag::SRF_FULL) {
        nEvtFullReadout[ix-1][iy-1][iz]++;
        nFRO[iz]++;
        if(nPerRu_[iDcc-1][isc] == 0) {
          if(status != 1) nEvtDroppedReadoutIfFR[ix-1][iy-1][iz]++;
          nDroppedFRO[iz]++;
        }
      }

      if(flag == EcalSrFlag::SRF_ZS1) nEvtZS1Readout[ix-1][iy-1][iz]++;

      if(it->value() & EcalSrFlag::SRF_FORCED_MASK) nEvtRUForced[ix-1][iy-1][iz]++;

      if(flag == EcalSrFlag::SRF_ZS1 || flag == EcalSrFlag::SRF_ZS2) {
        nEvtZSReadout[ix-1][iy-1][iz]++;
        if(nPerRu_[iDcc-1][isc] == getCrystalCount(iDcc,isc)) {
          if(status != 1) nEvtCompleteReadoutIfZS[ix-1][iy-1][iz]++;
          nCompleteZS[iz]++;
        }
      }

    }
  } else {
    edm::LogWarning("EESelectiveReadoutTask") << EESRFlagCollection_ << " not available";
  }

  for(int ix = 0; ix < 20; ix++ ) {
    for(int iy = 0; iy < 20; iy++ ) {
      for(int iz = 0; iz < 2; iz++) {

        if( nEvtAnyReadout[ix][iy][iz] ) {

          float xix = ix;
          if ( iz == 0 ) xix = 19 - xix;
          xix += 0.5;

          float xiy = iy+0.5;

          float fraction = float(nEvtFullReadout[ix][iy][iz]) / float(nEvtAnyReadout[ix][iy][iz]);
          float error = sqrt(fraction*(1-fraction)/float(nEvtAnyReadout[ix][iy][iz]));

          TH2F *h2d = EEFullReadoutSRFlagMap_[iz]->getTH2F();

          int binx=0, biny=0;

          if( h2d ) {
            binx = h2d->GetXaxis()->FindBin(xix);
            biny = h2d->GetYaxis()->FindBin(xiy);
          }

          EEFullReadoutSRFlagMap_[iz]->setBinContent(binx, biny, fraction);
          EEFullReadoutSRFlagMap_[iz]->setBinError(binx, biny, error);


          fraction = float(nEvtZS1Readout[ix][iy][iz]) / float(nEvtAnyReadout[ix][iy][iz]);
          error = sqrt(fraction*(1-fraction)/float(nEvtAnyReadout[ix][iy][iz]));

          h2d = EEZeroSuppression1SRFlagMap_[iz]->getTH2F();

          if( h2d ) {
            binx = h2d->GetXaxis()->FindBin(xix);
            biny = h2d->GetYaxis()->FindBin(xiy);
          }

          EEZeroSuppression1SRFlagMap_[iz]->setBinContent(binx, biny, fraction);
          EEZeroSuppression1SRFlagMap_[iz]->setBinError(binx, biny, error);


          fraction = float(nEvtRUForced[ix][iy][iz]) / float(nEvtAnyReadout[ix][iy][iz]);
          error = sqrt(fraction*(1-fraction)/float(nEvtAnyReadout[ix][iy][iz]));

          h2d = EEReadoutUnitForcedBitMap_[iz]->getTH2F();

          if( h2d ) {
            binx = h2d->GetXaxis()->FindBin(xix);
            biny = h2d->GetYaxis()->FindBin(xiy);
          }

          EEReadoutUnitForcedBitMap_[iz]->setBinContent(binx, biny, fraction);
          EEReadoutUnitForcedBitMap_[iz]->setBinError(binx, biny, error);

          if( nEvtZSReadout[ix][iy][iz] ) {
            fraction = float(nEvtCompleteReadoutIfZS[ix][iy][iz]) / float(nEvtZSReadout[ix][iy][iz]);
            error = sqrt(fraction*(1-fraction)/float(nEvtAnyReadout[ix][iy][iz]));
            
            h2d = EECompleteZSMap_[iz]->getTH2F();
            
            if( h2d ) {
              binx = h2d->GetXaxis()->FindBin(xix);
              biny = h2d->GetYaxis()->FindBin(xiy);
            }
            
            EECompleteZSMap_[iz]->setBinContent(binx, biny, fraction);
            EECompleteZSMap_[iz]->setBinError(binx, biny, error);
          }

          if( nEvtFullReadout[ix][iy][iz] ) {
            fraction = float(nEvtDroppedReadoutIfFR[ix][iy][iz]) / float(nEvtFullReadout[ix][iy][iz]);
            error = sqrt(fraction*(1-fraction)/float(nEvtAnyReadout[ix][iy][iz]));
            
            h2d = EEDroppedFRMap_[iz]->getTH2F();
            
            if( h2d ) {
              binx = h2d->GetXaxis()->FindBin(xix);
              biny = h2d->GetYaxis()->FindBin(xiy);
            }

            EEDroppedFRMap_[iz]->setBinContent(binx, biny, fraction);
            EEDroppedFRMap_[iz]->setBinError(binx, biny, error);
          }

        }

      }
    }
  }

  for(int iz = 0; iz < 2; iz++) {
    EEFullReadoutSRFlagCount_[iz]->Fill( nFRO[iz] );
    EECompleteZSCount_[iz]->Fill( nCompleteZS[iz] );
    EEDroppedFRCount_[iz]->Fill( nDroppedFRO[iz] );
  }

  edm::Handle<EcalTrigPrimDigiCollection> TPCollection;
  if ( e.getByLabel(EcalTrigPrimDigiCollection_, TPCollection) ) {

    // Trigger Primitives
    EcalTrigPrimDigiCollection::const_iterator TPdigi;
    for ( TPdigi = TPCollection->begin(); TPdigi != TPCollection->end(); ++TPdigi ) {

      if ( Numbers::subDet( TPdigi->id() ) != EcalEndcap ) continue;

      int ismt = Numbers::iSM( TPdigi->id() );
      int zside = TPdigi->id().zside();
      int iz = ( zside < 0 ) ? 0 : 1;

      EETTFlags_[iz]->Fill( TPdigi->ttFlag() );

      std::vector<DetId>* crystals = Numbers::crystals( TPdigi->id() );

      for ( unsigned int i=0; i<crystals->size(); i++ ) {

        EEDetId id = (*crystals)[i];

        int ix = id.ix();
        int iy = id.iy();
        int ism = Numbers::iSM( id );
        int itcc = Numbers::iTCC( ism, EcalEndcap, ix, iy );
        int itt = Numbers::iTT( ism, EcalEndcap, ix, iy );

        if ( ismt >= 1 && ismt <= 9 ) ix = 101 - ix;

        nEvtAnyInterest[ix-1][iy-1][iz]++;

        if ( (TPdigi->ttFlag() & 0x3) == 0 ) nEvtLowInterest[ix-1][iy-1][iz]++;

        if ( (TPdigi->ttFlag() & 0x3) == 1 ) nEvtMediumInterest[ix-1][iy-1][iz]++;

        if ( (TPdigi->ttFlag() & 0x3) == 3 ) nEvtHighInterest[ix-1][iy-1][iz]++;

        float xix = ix-0.5;
        if ( iz == 0 ) xix = 100 - xix;
        float xiy = iy-0.5;

        if ( ((TPdigi->ttFlag() & 0x3) == 1 || (TPdigi->ttFlag() & 0x3) == 3)
             && nCryTT[itcc-1][itt-1] != (int)crystals->size() ) EETTFMismatch_[iz]->Fill(xix, xiy);

      }

    }
  } else {
    edm::LogWarning("EESelectiveReadoutTask") << EcalTrigPrimDigiCollection_ << " not available";
  }

  for(int ix = 0; ix < 100; ix++ ) {
    for(int iy = 0; iy < 100; iy++ ) {
      for(int iz = 0; iz < 2; iz++) {

        if( nEvtAnyInterest[ix][iy][iz] ) {

          float xix = ix;
          if ( iz == 0 ) xix = 99 - xix;
          xix += 0.5;

          float xiy = iy+0.5;

          float fraction = float(nEvtHighInterest[ix][iy][iz]) / float(nEvtAnyInterest[ix][iy][iz]);
          float error = sqrt(fraction*(1-fraction)/float(nEvtAnyInterest[ix][iy][iz]));

          TH2F *h2d = EEHighInterestTriggerTowerFlagMap_[iz]->getTH2F();

          int binx=0, biny=0;

          if( h2d ) {
            binx = h2d->GetXaxis()->FindBin(xix);
            biny = h2d->GetYaxis()->FindBin(xiy);
          }

          EEHighInterestTriggerTowerFlagMap_[iz]->setBinContent(binx, biny, fraction);
          EEHighInterestTriggerTowerFlagMap_[iz]->setBinError(binx, biny, error);


          fraction = float(nEvtMediumInterest[ix][iy][iz]) / float(nEvtAnyInterest[ix][iy][iz]);
          error = sqrt(fraction*(1-fraction)/float(nEvtAnyInterest[ix][iy][iz]));

          h2d = EEMediumInterestTriggerTowerFlagMap_[iz]->getTH2F();

          if( h2d ) {
            binx = h2d->GetXaxis()->FindBin(xix);
            biny = h2d->GetYaxis()->FindBin(xiy);
          }

          EEMediumInterestTriggerTowerFlagMap_[iz]->setBinContent(binx, biny, fraction);
          EEMediumInterestTriggerTowerFlagMap_[iz]->setBinError(binx, biny, error);


          fraction = float(nEvtLowInterest[ix][iy][iz]) / float(nEvtAnyInterest[ix][iy][iz]);
          error = sqrt(fraction*(1-fraction)/float(nEvtAnyInterest[ix][iy][iz]));

          h2d = EELowInterestTriggerTowerFlagMap_[iz]->getTH2F();

          if( h2d ) {
            binx = h2d->GetXaxis()->FindBin(xix);
            biny = h2d->GetYaxis()->FindBin(xiy);
          }

          EELowInterestTriggerTowerFlagMap_[iz]->setBinContent(binx, biny, fraction);
          EELowInterestTriggerTowerFlagMap_[iz]->setBinError(binx, biny, error);

        }

      }
    }
  }

}

void EESelectiveReadoutTask::beginJob ( void ) [protected, virtual]

BeginJob.

Reimplemented from edm::EDAnalyzer.

Definition at line 106 of file EESelectiveReadoutTask.cc.

References dqmStore_, ievt_, prefixME_, DQMStore::rmdir(), and DQMStore::setCurrentFolder().

                                          {

  ievt_ = 0;

  if ( dqmStore_ ) {
    dqmStore_->setCurrentFolder(prefixME_ + "/EESelectiveReadoutTask");
    dqmStore_->rmdir(prefixME_ + "/EESelectiveReadoutTask");
  }

}

void EESelectiveReadoutTask::beginRun	(	const edm::Run &	r,
		const edm::EventSetup &	c
	)		`[protected, virtual]`

BeginRun.

Reimplemented from edm::EDAnalyzer.

Definition at line 117 of file EESelectiveReadoutTask.cc.

References begin, configFirWeights(), EcalSRSettings::dccNormalizedWeights_, edm::EventSetup::get(), Numbers::initGeometry(), mergeRuns_, nEvtAnyInterest, nEvtAnyReadout, nEvtCompleteReadoutIfZS, nEvtDroppedReadoutIfFR, nEvtFullReadout, nEvtHighInterest, nEvtLowInterest, nEvtMediumInterest, nEvtRUForced, nEvtZS1Readout, nEvtZSReadout, edm::ESHandle< T >::product(), reset(), settings_, and useCondDb_.

                                                                             {

  Numbers::initGeometry(c, false);

  if ( ! mergeRuns_ ) this->reset();

  for(int ix = 0; ix < 20; ix++ ) {
    for(int iy = 0; iy < 20; iy++ ) {
      for(int iz = 0; iz < 2; iz++) {
        nEvtFullReadout[ix][iy][iz] = 0;
        nEvtZS1Readout[ix][iy][iz] = 0;
        nEvtZSReadout[ix][iy][iz] = 0;
        nEvtCompleteReadoutIfZS[ix][iy][iz] = 0;
        nEvtDroppedReadoutIfFR[ix][iy][iz] = 0;
        nEvtRUForced[ix][iy][iz] = 0;
        nEvtAnyReadout[ix][iy][iz] = 0;
      }
    }
  }
  for(int ix = 0; ix < 100; ix++ ) {
    for(int iy = 0; iy < 100; iy++ ) {
      for(int iz = 0; iz < 2; iz++) {
        nEvtHighInterest[ix][iy][iz] = 0;
        nEvtMediumInterest[ix][iy][iz] = 0;
        nEvtLowInterest[ix][iy][iz] = 0;
        nEvtAnyInterest[ix][iy][iz] = 0;
      }
    }
  }

  //getting selective readout configuration
  if(useCondDb_) {
    edm::ESHandle<EcalSRSettings> hSr;
    c.get<EcalSRSettingsRcd>().get(hSr);
    settings_ = hSr.product();
    std::vector<double> wsFromDB;
    
    std::vector<std::vector<float> > dccs = settings_->dccNormalizedWeights_;
    int nws = dccs.size();
    if(nws == 1) {
      for(std::vector<float>::const_iterator it = dccs[0].begin(); it != dccs[0].end(); it++) {
        wsFromDB.push_back(*it);
      }
    }
    else edm::LogWarning("EESelectiveReadoutTask") << "DCC weight set is not exactly 1.";

    configFirWeights(wsFromDB);
  }

}

int EESelectiveReadoutTask::cIndex2iXY ( int iX0 ) const [inline, private]

converse of iXY2cIndex() method.

Definition at line 199 of file EESelectiveReadoutTask.h.

                             {
  return iX0+1;
}

void EESelectiveReadoutTask::cleanup ( void ) [protected]

Cleanup.

Definition at line 452 of file EESelectiveReadoutTask.cc.

References dqmStore_, EECompleteZSCount_, EECompleteZSMap_, EEDccEventSize_, EEDccEventSizeMap_, EEDroppedFRCount_, EEDroppedFRMap_, EEEventSize_, EEFullReadoutSRFlagCount_, EEFullReadoutSRFlagMap_, EEHighInterestPayload_, EEHighInterestTriggerTowerFlagMap_, EEHighInterestZsFIR_, EELowInterestPayload_, EELowInterestTriggerTowerFlagMap_, EELowInterestZsFIR_, EEReadoutUnitForcedBitMap_, EETowerSize_, EETTFlags_, EETTFMismatch_, EEZeroSuppression1SRFlagMap_, edm::getName(), MonitorElement::getName(), init_, prefixME_, DQMStore::removeElement(), and DQMStore::setCurrentFolder().

Referenced by endJob().

                                        {

  if ( ! init_ ) return;

  if ( dqmStore_ ) {
    dqmStore_->setCurrentFolder(prefixME_ + "/EESelectiveReadoutTask");

    if ( EETowerSize_[0] ) dqmStore_->removeElement( EETowerSize_[0]->getName() );
    EETowerSize_[0] = 0;

    if ( EETowerSize_[1] ) dqmStore_->removeElement( EETowerSize_[1]->getName() );
    EETowerSize_[1] = 0;

    if ( EETTFMismatch_[0] ) dqmStore_->removeElement( EETTFMismatch_[0]->getName() );
    EETTFMismatch_[0] = 0;

    if ( EETTFMismatch_[1] ) dqmStore_->removeElement( EETTFMismatch_[1]->getName() );
    EETTFMismatch_[1] = 0;

    if ( EEDccEventSize_ ) dqmStore_->removeElement( EEDccEventSize_->getName() );
    EEDccEventSize_ = 0;

    if ( EEDccEventSizeMap_ ) dqmStore_->removeElement( EEDccEventSizeMap_->getName() );
    EEDccEventSizeMap_ = 0;

    if ( EEReadoutUnitForcedBitMap_[0] ) dqmStore_->removeElement( EEReadoutUnitForcedBitMap_[0]->getName() );
    EEReadoutUnitForcedBitMap_[0] = 0;

    if ( EEReadoutUnitForcedBitMap_[1] ) dqmStore_->removeElement( EEReadoutUnitForcedBitMap_[1]->getName() );
    EEReadoutUnitForcedBitMap_[1] = 0;

    if ( EEFullReadoutSRFlagMap_[0] ) dqmStore_->removeElement( EEFullReadoutSRFlagMap_[0]->getName() );
    EEFullReadoutSRFlagMap_[0] = 0;

    if ( EEFullReadoutSRFlagMap_[1] ) dqmStore_->removeElement( EEFullReadoutSRFlagMap_[1]->getName() );
    EEFullReadoutSRFlagMap_[1] = 0;

    if ( EEFullReadoutSRFlagCount_[0] ) dqmStore_->removeElement( EEFullReadoutSRFlagCount_[0]->getName() );
    EEFullReadoutSRFlagCount_[0] = 0;

    if ( EEFullReadoutSRFlagCount_[1] ) dqmStore_->removeElement( EEFullReadoutSRFlagCount_[1]->getName() );
    EEFullReadoutSRFlagCount_[1] = 0;

    if ( EEZeroSuppression1SRFlagMap_[0] ) dqmStore_->removeElement( EEZeroSuppression1SRFlagMap_[0]->getName() );
    EEZeroSuppression1SRFlagMap_[0] = 0;

    if ( EEZeroSuppression1SRFlagMap_[1] ) dqmStore_->removeElement( EEZeroSuppression1SRFlagMap_[1]->getName() );
    EEZeroSuppression1SRFlagMap_[1] = 0;

    if ( EEHighInterestTriggerTowerFlagMap_[0] ) dqmStore_->removeElement( EEHighInterestTriggerTowerFlagMap_[0]->getName() );
    EEHighInterestTriggerTowerFlagMap_[0] = 0;

    if ( EEHighInterestTriggerTowerFlagMap_[1] ) dqmStore_->removeElement( EEHighInterestTriggerTowerFlagMap_[1]->getName() );
    EEHighInterestTriggerTowerFlagMap_[1] = 0;

    if ( EELowInterestTriggerTowerFlagMap_[0] ) dqmStore_->removeElement( EELowInterestTriggerTowerFlagMap_[0]->getName() );
    EELowInterestTriggerTowerFlagMap_[0] = 0;

    if ( EELowInterestTriggerTowerFlagMap_[1] ) dqmStore_->removeElement( EELowInterestTriggerTowerFlagMap_[1]->getName() );
    EELowInterestTriggerTowerFlagMap_[1] = 0;

    if ( EETTFlags_[0] ) dqmStore_->removeElement( EETTFlags_[0]->getName() );
    EETTFlags_[0] = 0;

    if ( EETTFlags_[1] ) dqmStore_->removeElement( EETTFlags_[1]->getName() );
    EETTFlags_[1] = 0;

    if ( EECompleteZSMap_[0] ) dqmStore_->removeElement( EECompleteZSMap_[0]->getName() );
    EECompleteZSMap_[0] = 0;

    if ( EECompleteZSMap_[1] ) dqmStore_->removeElement( EECompleteZSMap_[1]->getName() );
    EECompleteZSMap_[1] = 0;

    if ( EECompleteZSCount_[0] ) dqmStore_->removeElement( EECompleteZSCount_[0]->getName() );
    EECompleteZSCount_[0] = 0;

    if ( EECompleteZSCount_[1] ) dqmStore_->removeElement( EECompleteZSCount_[1]->getName() );
    EECompleteZSCount_[1] = 0;

    if ( EEDroppedFRMap_[0] ) dqmStore_->removeElement( EEDroppedFRMap_[0]->getName() );
    EEDroppedFRMap_[0] = 0;

    if ( EEDroppedFRMap_[1] ) dqmStore_->removeElement( EEDroppedFRMap_[1]->getName() );
    EEDroppedFRMap_[1] = 0;

    if ( EEDroppedFRCount_[0] ) dqmStore_->removeElement( EEDroppedFRCount_[0]->getName() );
    EEDroppedFRCount_[0] = 0;

    if ( EEDroppedFRCount_[1] ) dqmStore_->removeElement( EEDroppedFRCount_[1]->getName() );
    EEDroppedFRCount_[1] = 0;

    if ( EEEventSize_[0] ) dqmStore_->removeElement( EEEventSize_[0]->getName() );
    EEEventSize_[0] = 0;

    if ( EEEventSize_[1] ) dqmStore_->removeElement( EEEventSize_[1]->getName() );
    EEEventSize_[1] = 0;

    if ( EEHighInterestPayload_[0] ) dqmStore_->removeElement( EEHighInterestPayload_[0]->getName() );
    EEHighInterestPayload_[0] = 0;

    if ( EEHighInterestPayload_[1] ) dqmStore_->removeElement( EEHighInterestPayload_[1]->getName() );
    EEHighInterestPayload_[1] = 0;

    if ( EELowInterestPayload_[0] ) dqmStore_->removeElement( EELowInterestPayload_[0]->getName() );
    EELowInterestPayload_[0] = 0;

    if ( EELowInterestPayload_[1] ) dqmStore_->removeElement( EELowInterestPayload_[1]->getName() );
    EELowInterestPayload_[1] = 0;

    if ( EEHighInterestZsFIR_[0] ) dqmStore_->removeElement( EEHighInterestZsFIR_[0]->getName() );
    EEHighInterestZsFIR_[0] = 0;

    if ( EEHighInterestZsFIR_[1] ) dqmStore_->removeElement( EEHighInterestZsFIR_[1]->getName() );
    EEHighInterestZsFIR_[1] = 0;

    if ( EELowInterestZsFIR_[0] ) dqmStore_->removeElement( EELowInterestZsFIR_[0]->getName() );
    EELowInterestZsFIR_[0] = 0;

    if ( EELowInterestZsFIR_[1] ) dqmStore_->removeElement( EELowInterestZsFIR_[1]->getName() );
    EELowInterestZsFIR_[1] = 0;

  }

  init_ = false;

}

void EESelectiveReadoutTask::configFirWeights ( std::vector< double > weightsForZsFIR ) [private]

Configure DCC ZS FIR weights. Heuristic is used to determine if input weights are normalized weights or integer weights in the hardware representation.

Parameters:

weightsForZsFIR weights from configuration file

Definition at line 1239 of file EESelectiveReadoutTask.cc.

References Exception, firstFIRSample_, firWeights_, getFIRWeights(), i, create_public_lumi_plots::log, indexGen::s2, and mathSSE::sqrt().

Referenced by beginRun(), and EESelectiveReadoutTask().

                                                                         {
  bool notNormalized  = false;
  bool notInt = false;
  for(unsigned i=0; i < weightsForZsFIR.size(); ++i){
    if(weightsForZsFIR[i] > 1.) notNormalized = true;
    if((int)weightsForZsFIR[i]!=weightsForZsFIR[i]) notInt = true;
  }
  if(notInt && notNormalized){
    throw cms::Exception("InvalidParameter")
      << "weigtsForZsFIR paramater values are not valid: they "
      << "must either be integer and uses the hardware representation "
      << "of the weights or less or equal than 1 and used the normalized "
      << "representation.";
  }
  edm::LogInfo log("DccFir");
  if(notNormalized){
    firWeights_ = std::vector<int>(weightsForZsFIR.size());
    for(unsigned i = 0; i< weightsForZsFIR.size(); ++i){
      firWeights_[i] = (int)weightsForZsFIR[i];
    }
  } else{
    firWeights_ = getFIRWeights(weightsForZsFIR);
  }

  log << "Input weights for FIR: ";
  for(unsigned i = 0; i < weightsForZsFIR.size(); ++i){
    log << weightsForZsFIR[i] << "\t";
  }

  double s2 = 0.;
  log << "\nActual FIR weights: ";
  for(unsigned i = 0; i < firWeights_.size(); ++i){
    log << firWeights_[i] << "\t";
    s2 += firWeights_[i]*firWeights_[i];
  }

  s2 = sqrt(s2);
  log << "\nNormalized FIR weights after hw representation rounding: ";
  for(unsigned i = 0; i < firWeights_.size(); ++i){
    log << firWeights_[i] / (double)(1<<10) << "\t";
  }

  log <<"\nFirst FIR sample: " << firstFIRSample_;
}

int EESelectiveReadoutTask::dccIndex	(	int	iDet,
		int	i,
		int	j
	)		const `[private]`

Gets the index of the DCC reading a crystal

Parameters:

i	iX
j	iY

Returns:: DCC phi index between 0 and 8 for EE

Definition at line 1165 of file EESelectiveReadoutTask.cc.

References dccPhiIndex().

Referenced by dccNum().

                                                                 {
  int iPhi = dccPhiIndex(i, j);
  if(iPhi<0) return -1;
  //34 DCCs in barrel and 8 in EE-=>in EE+ DCC numbering starts at 45,
  //iDet/2 is 0 for EE- and 1 for EE+:
  return iPhi+iDet/2*45;
}

unsigned EESelectiveReadoutTask::dccNum ( const DetId & xtalId ) const [private]

Retrieve the logical number of the DCC reading a given crystal channel.

Parameters:

xtarId crystal channel identifier

Returns:: the DCC logical number starting from 1.

Definition at line 1095 of file EESelectiveReadoutTask.cc.

References dccIndex(), DetId::det(), DetId::Ecal, EcalEndcap, Exception, EEDetId::ix(), iXY2cIndex(), EEDetId::iy(), j, gen::k, nECALDcc, DetId::subdetId(), and EEDetId::zside().

Referenced by anaDigi().

                                                                 {
  int j;
  int k;

  if ( xtalId.det()!=DetId::Ecal ) {
    throw cms::Exception("EESelectiveReadoutTask") << "Crystal does not belong to ECAL";
  }

  int iDet = 0;

  if(xtalId.subdetId()==EcalEndcap){
    EEDetId eeDetId(xtalId);
    j = iXY2cIndex(eeDetId.ix());
    k = iXY2cIndex(eeDetId.iy());
    int zside = eeDetId.zside();
    if ( zside < 0 ) iDet = 0;
    else iDet = 2;
  } else {
    throw cms::Exception("EESelectiveReadoutTask") << "Not ECAL endcap.";
  }
  int iDcc0 = dccIndex(iDet,j,k);
  assert(iDcc0>=0 && iDcc0<nECALDcc);
  return iDcc0+1;
}

unsigned EESelectiveReadoutTask::dccNumOfRU ( const EcalScDetId & scId ) const [private]

Retrieve the logical number of the DCC reading a given SC channel.

Parameters:

scId	SC channel identifier

Returns:: the DCC logical number starting from 1.

Definition at line 1120 of file EESelectiveReadoutTask.cc.

References dccPhiIndexOfRU(), DetId::det(), DetId::Ecal, EcalEndcap, Exception, EcalScDetId::ix(), EcalScDetId::iy(), j, gen::k, nECALDcc, DetId::subdetId(), and EcalScDetId::zside().

Referenced by analyze().

                                                                         {
  int j;
  int k;

  if ( scId.det()!=DetId::Ecal ) {
    throw cms::Exception("EESelectiveReadoutTask") << "SuperCrystal does not belong to ECAL";
  }

  int iDet = 0;

  if(scId.subdetId()==EcalEndcap){
    j = scId.ix()-1;
    k = scId.iy()-1;
    int zside = scId.zside();
    if ( zside < 0 ) iDet = 0;
    else iDet = 2;
  } else {
    throw cms::Exception("EESelectiveReadoutTask") << "Not ECAL endcap.";
  }
  int iDcc0 = 0;
  int iPhi = dccPhiIndexOfRU(j,k);
  if(iPhi<0) iDcc0 = -1;
  else iDcc0 = iPhi+iDet/2*45;
  assert(iDcc0>=0 && iDcc0<nECALDcc);
  return iDcc0+1;
}

int EESelectiveReadoutTask::dccPhiIndex	(	int	i,
		int	j
	)		const `[inline, private]`

Gets the phi index of the DCC reading a crystal

Parameters:

i	iX
j	iY

Returns:: DCC phi index between 0 and 8 for EE

Definition at line 244 of file EESelectiveReadoutTask.h.

References dccPhiIndexOfRU().

Referenced by dccIndex().

                                           {
  return dccPhiIndexOfRU(i/5, j/5);
}

int EESelectiveReadoutTask::dccPhiIndexOfRU	(	int	i,
		int	j
	)		const `[private]`

Gets the phi index of the DCC reading a RU (SC or TT)

Parameters:

i	iX
j	iY

Returns:: DCC phi index between 0 and 8 for EE

Definition at line 1160 of file EESelectiveReadoutTask.cc.

References endcapDccMap.

Referenced by dccNumOfRU(), and dccPhiIndex().

                                                              {
  char flag=endcapDccMap[i+j*20];
  return (flag==' ')?-1:(flag-'0');
}

int EESelectiveReadoutTask::dccZsFIR	(	const EcalDataFrame &	frame,
		const std::vector< int > &	firWeights,
		int	firstFIRSample,
		bool *	saturated = `0`
	)		`[static, private]`

Emulates the DCC zero suppression FIR filter. If one of the time sample is not in gain 12, numeric_limits<int>::max() is returned.

Parameters:

frame	data frame
firWeights	TAP weights
firstFIRSample	index (starting from 1) of the first time sample to be used in the filter
saturated	if not null, *saturated is set to true if all the time sample are not in gain 12 and set to false otherwise.

Returns:: FIR output or numeric_limits<int>::max().

Definition at line 1176 of file EESelectiveReadoutTask.cc.

References EcalMGPASample::adc(), EcalMGPASample::gainId(), i, LogTrace, max(), compare_using_db::sample, EcalDataFrame::size(), and w().

Referenced by anaDigi().

                                                 {
  const int nFIRTaps = 6;
  //FIR filter weights:
  const std::vector<int>& w = firWeights;

  //accumulator used to compute weighted sum of samples
  int acc = 0;
  bool gain12saturated = false;
  const int gain12 = 0x01;

  int iWeight = 0;
  for(int i = -1; i < nFIRTaps - 1; ++i, ++iWeight){
    int iSample(firstFIRSample + i);
    if(iSample>=0 && iSample < frame.size()){
      EcalMGPASample sample(frame[iSample]);
      if(sample.gainId()!=gain12) gain12saturated = true;
      LogTrace("DccFir") << (iSample>=firstFIRSample?"+":"") << sample.adc()
                         << "*(" << w[iWeight] << ")";
      acc+=sample.adc()*w[iWeight];
    } else{
      edm::LogWarning("DccFir") << __FILE__ << ":" << __LINE__ <<
        ": Not enough samples in data frame or 'ecalDccZs1stSample' module "
        "parameter is not valid...";
    }
  }
  LogTrace("DccFir") << "\n";
  //discards the 8 LSBs
  //(shift operator cannot be used on negative numbers because
  // the result depends on compilator implementation)
  acc = (acc>=0)?(acc >> 8):-(-acc >> 8);
  //ZS passed if weighted sum acc above ZS threshold or if
  //one sample has a lower gain than gain 12 (that is gain 12 output
  //is saturated)

  LogTrace("DccFir") << "acc: " << acc << "\n"
                     << "saturated: " << (gain12saturated?"yes":"no") << "\n";

  if(saturated){
    *saturated = gain12saturated;
  }

  return gain12saturated?std::numeric_limits<int>::max():acc;
}

void EESelectiveReadoutTask::endJob ( void ) [protected, virtual]

EndJob.

Reimplemented from edm::EDAnalyzer.

Definition at line 579 of file EESelectiveReadoutTask.cc.

References cleanup(), enableCleanup_, and ievt_.

                                       {

  edm::LogInfo("EESelectiveReadoutTask") << "analyzed " << ievt_ << " events";

  if ( enableCleanup_ ) this->cleanup();

}

void EESelectiveReadoutTask::endRun	(	const edm::Run &	r,
		const edm::EventSetup &	c
	)		`[protected, virtual]`

EndRun.

Reimplemented from edm::EDAnalyzer.

Definition at line 168 of file EESelectiveReadoutTask.cc.

                                                                           {

}

int EESelectiveReadoutTask::getCrystalCount	(	int	iDcc,
		int	iDccCh
	)		`[private]`

Retrieves number of crystal channel read out by a DCC channel

Parameters:

iDcc	DCC ID starting from 1
iDccCh	DCC channel starting from 1

Returns:: crystal count

Definition at line 1284 of file EESelectiveReadoutTask.cc.

Referenced by analyze().

                                                                {
  if(iDcc<1 || iDcc>54) {
    // invalid DCC
    return 0;
  } else if (10 <= iDcc && iDcc <= 45) {
    // EB
    return 25;
  } else {
    // EE
    int iDccPhi;
    if(iDcc < 10) {
      iDccPhi = iDcc;
    } else {
      iDccPhi = iDcc - 45;
    }
    switch(iDccPhi*100+iDccCh){
      case 110:
      case 232:
      case 312:
      case 412:
      case 532:
      case 610:
      case 830:
      case 806:
        //inner partials at 12, 3, and 9 o'clock
        return 20;
      case 134:
      case 634:
      case 827:
      case 803:
      return 10;
      case 330:
      case 430:
        return 20;
      case 203:
      case 503:
      case 721:
      case 921:
        return 21;
      default:
        return 25;
    }
  }
}

double EESelectiveReadoutTask::getDccEventSize	(	int	iDcc0,
		double	nReadXtals
	)		const `[inline, private]`

Gets the size of an DCC event fragment.

Parameters:

iDcc0	the DCC logical number starting from 0.
nReadXtals	number of read crystal channels.

Returns:: the DCC event fragment size in bytes.

Definition at line 222 of file EESelectiveReadoutTask.h.

References bytesPerCrystal, EB, EE, getDccOverhead(), and nRuPerDcc_.

                                                          {
  subdet_t subdet;
  if(iDcc0<9 || iDcc0>=45){
    subdet = EE;
  } else{
    subdet = EB;
  }
  return getDccOverhead(subdet)+nReadXtals*bytesPerCrystal+nRuPerDcc_[iDcc0]*8;
}

double EESelectiveReadoutTask::getDccOverhead ( subdet_t subdet ) const [inline, private]

Gets the size in bytes fixed-size part of a DCC event fragment.

Returns:: the fixed size in bytes.

Definition at line 212 of file EESelectiveReadoutTask.h.

References EB.

Referenced by getDccEventSize(), and getEeEventSize().

                                            {
  //  return (subdet==EB?34:25)*8;
  return (subdet==EB?34:52)*8;
}

double EESelectiveReadoutTask::getEeEventSize ( double nReadXtals ) const [private]

Computes the size of an ECAL endcap event fragment.

Parameters:

nReadXtals number of read crystal channels

Returns:: the event fragment size in bytes

Definition at line 1147 of file EESelectiveReadoutTask.cc.

References bytesPerCrystal, EE, getDccOverhead(), nEBDcc, nECALDcc, nEEDcc, and nRuPerDcc_.

Referenced by analyze().

                                                                     {
  double ruHeaderPayload = 0.;
  const int firstEbDcc0 = nEEDcc/2;
  for ( int iDcc0 = 0; iDcc0 < nECALDcc; ++iDcc0 ) {
    //skip barrel:
    if(iDcc0 == firstEbDcc0) iDcc0 += nEBDcc;
      ruHeaderPayload += nRuPerDcc_[iDcc0]*8.;
  }
  return getDccOverhead(EE)*nEEDcc +
         nReadXtals*bytesPerCrystal +
         ruHeaderPayload;
}

std::vector< int > EESelectiveReadoutTask::getFIRWeights ( const std::vector< double > & normalizedWeights ) [static, private]

Computes the ZS FIR filter weights from the normalized weights.

Parameters:

normalizedWeights the normalized weights

Returns:: the computed ZS filter weights.

Definition at line 1224 of file EESelectiveReadoutTask.cc.

References abs, i, and min.

Referenced by configFirWeights().

                                                        {
  const int nFIRTaps = 6;
  std::vector<int> firWeights(nFIRTaps, 0); //default weight: 0;
  const static int maxWeight = 0xEFF; //weights coded on 11+1 signed bits
  for(unsigned i=0; i < std::min((size_t)nFIRTaps,normalizedWeights.size()); ++i){
    firWeights[i] = lround(normalizedWeights[i] * (1<<10));
    if(std::abs(firWeights[i])>maxWeight){//overflow
      firWeights[i] = firWeights[i]<0?-maxWeight:maxWeight;
    }
  }
  return firWeights;
}

int EESelectiveReadoutTask::iXY2cIndex ( int iX ) const [inline, private]

Converts a std CMSSW crystal x or y index to a c-array index (starting from zero and without hole).

Definition at line 193 of file EESelectiveReadoutTask.h.

Referenced by anaDigi(), and dccNum().

                            {
  return iX-1;
}

const EcalScDetId EESelectiveReadoutTask::readOutUnitOf ( const EEDetId & xtalId ) const [private]

Retrives the readout unit, a trigger tower in the barrel case, and a supercrystal in the endcap case, a given crystal belongs to.

Parameters:

xtalId identifier of the crystal

Returns:: identifer of the supercrystal or of the trigger tower.

Definition at line 1085 of file EESelectiveReadoutTask.cc.

References Numbers::getEcalScDetId(), EEDetId::ix(), EEDetId::iy(), and EEDetId::zside().

Referenced by anaDigi().

                                                                 {
  if (xtalId.ix() > 40 && xtalId.ix() < 61 &&
      xtalId.iy() > 40 && xtalId.iy() < 61) {
    // crystal belongs to an inner partial supercrystal
    return Numbers::getEcalScDetId(xtalId);
  } else {
    return EcalScDetId((xtalId.ix()-1)/5+1, (xtalId.iy()-1)/5+1, xtalId.zside());
  }
}

void EESelectiveReadoutTask::reset ( void ) [protected]

Reset.

Definition at line 172 of file EESelectiveReadoutTask.cc.

References EECompleteZSCount_, EECompleteZSMap_, EEDccEventSize_, EEDccEventSizeMap_, EEDroppedFRCount_, EEDroppedFRMap_, EEEventSize_, EEFullReadoutSRFlagCount_, EEFullReadoutSRFlagMap_, EEHighInterestPayload_, EEHighInterestTriggerTowerFlagMap_, EEHighInterestZsFIR_, EELowInterestPayload_, EELowInterestTriggerTowerFlagMap_, EELowInterestZsFIR_, EEMediumInterestTriggerTowerFlagMap_, EEReadoutUnitForcedBitMap_, EETowerSize_, EETTFlags_, EETTFMismatch_, EEZeroSuppression1SRFlagMap_, and MonitorElement::Reset().

Referenced by beginRun().

                                       {

  if ( EETowerSize_[0] ) EETowerSize_[0]->Reset();
  if ( EETowerSize_[1] ) EETowerSize_[1]->Reset();

  if ( EETTFMismatch_[0] ) EETTFMismatch_[0]->Reset();
  if ( EETTFMismatch_[1] ) EETTFMismatch_[1]->Reset();

  if ( EEDccEventSize_ ) EEDccEventSize_->Reset();

  if ( EEDccEventSizeMap_ ) EEDccEventSizeMap_->Reset();

  if ( EEReadoutUnitForcedBitMap_[0] ) EEReadoutUnitForcedBitMap_[0]->Reset();
  if ( EEReadoutUnitForcedBitMap_[1] ) EEReadoutUnitForcedBitMap_[1]->Reset();

  if ( EEFullReadoutSRFlagMap_[0] ) EEFullReadoutSRFlagMap_[0]->Reset();
  if ( EEFullReadoutSRFlagMap_[1] ) EEFullReadoutSRFlagMap_[1]->Reset();

  if ( EEFullReadoutSRFlagCount_[0] ) EEFullReadoutSRFlagCount_[0]->Reset();
  if ( EEFullReadoutSRFlagCount_[1] ) EEFullReadoutSRFlagCount_[1]->Reset();
  
  if ( EEZeroSuppression1SRFlagMap_[0] ) EEZeroSuppression1SRFlagMap_[0]->Reset();
  if ( EEZeroSuppression1SRFlagMap_[1] ) EEZeroSuppression1SRFlagMap_[1]->Reset();

  if ( EEHighInterestTriggerTowerFlagMap_[0] ) EEHighInterestTriggerTowerFlagMap_[0]->Reset();
  if ( EEHighInterestTriggerTowerFlagMap_[1] ) EEHighInterestTriggerTowerFlagMap_[1]->Reset();

  if ( EEMediumInterestTriggerTowerFlagMap_[0] ) EEMediumInterestTriggerTowerFlagMap_[0]->Reset();
  if ( EEMediumInterestTriggerTowerFlagMap_[1] ) EEMediumInterestTriggerTowerFlagMap_[1]->Reset();

  if ( EELowInterestTriggerTowerFlagMap_[0] ) EELowInterestTriggerTowerFlagMap_[0]->Reset();
  if ( EELowInterestTriggerTowerFlagMap_[1] ) EELowInterestTriggerTowerFlagMap_[1]->Reset();

  if ( EETTFlags_[0] ) EETTFlags_[0]->Reset();
  if ( EETTFlags_[1] ) EETTFlags_[1]->Reset();

  if ( EECompleteZSMap_[0] ) EECompleteZSMap_[0]->Reset();
  if ( EECompleteZSMap_[1] ) EECompleteZSMap_[1]->Reset();
  
  if ( EECompleteZSCount_[0] ) EECompleteZSCount_[0]->Reset();
  if ( EECompleteZSCount_[1] ) EECompleteZSCount_[1]->Reset();

  if ( EEDroppedFRMap_[0] ) EEDroppedFRMap_[0]->Reset();
  if ( EEDroppedFRMap_[1] ) EEDroppedFRMap_[1]->Reset();

  if ( EEDroppedFRCount_[0] ) EEDroppedFRCount_[0]->Reset();
  if ( EEDroppedFRCount_[1] ) EEDroppedFRCount_[1]->Reset();

  if ( EEEventSize_[0] ) EEEventSize_[0]->Reset();
  if ( EEEventSize_[1] ) EEEventSize_[1]->Reset();

  if ( EEHighInterestPayload_[0] ) EEHighInterestPayload_[0]->Reset();
  if ( EEHighInterestPayload_[1] ) EEHighInterestPayload_[1]->Reset();

  if ( EELowInterestPayload_[0] ) EELowInterestPayload_[0]->Reset();
  if ( EELowInterestPayload_[1] ) EELowInterestPayload_[1]->Reset();

  if ( EEHighInterestZsFIR_[0] ) EEHighInterestZsFIR_[0]->Reset();
  if ( EEHighInterestZsFIR_[1] ) EEHighInterestZsFIR_[1]->Reset();

  if ( EELowInterestZsFIR_[0] ) EELowInterestZsFIR_[0]->Reset();
  if ( EELowInterestZsFIR_[1] ) EELowInterestZsFIR_[1]->Reset();

}

void EESelectiveReadoutTask::setup ( void ) [protected]

Setup.

Definition at line 237 of file EESelectiveReadoutTask.cc.

References DQMStore::book1D(), DQMStore::book2D(), DQMStore::bookProfile(), DQMStore::bookProfile2D(), dqmStore_, EECompleteZSCount_, EECompleteZSMap_, EEDccEventSize_, EEDccEventSizeMap_, EEDroppedFRCount_, EEDroppedFRMap_, EEEventSize_, EEFullReadoutSRFlagCount_, EEFullReadoutSRFlagMap_, EEHighInterestPayload_, EEHighInterestTriggerTowerFlagMap_, EEHighInterestZsFIR_, EELowInterestPayload_, EELowInterestTriggerTowerFlagMap_, EELowInterestZsFIR_, EEMediumInterestTriggerTowerFlagMap_, EEReadoutUnitForcedBitMap_, EETowerSize_, EETTFlags_, EETTFMismatch_, EEZeroSuppression1SRFlagMap_, i, init_, mergeVDriftHistosByStation::name, prefixME_, Numbers::sEE(), MonitorElement::setAxisTitle(), MonitorElement::setBinLabel(), DQMStore::setCurrentFolder(), xbins, and ybins.

Referenced by analyze().

                                       {

  init_ = true;

  std::string name;

  if ( dqmStore_ ) {
    dqmStore_->setCurrentFolder(prefixME_ + "/EESelectiveReadoutTask");

    name = "EESRT tower event size EE -";
    EETowerSize_[0] = dqmStore_->bookProfile2D(name, name, 20, 0., 20., 20, 0., 20., 100, 0., 200., "s");
    EETowerSize_[0]->setAxisTitle("jx", 1);
    EETowerSize_[0]->setAxisTitle("jy", 2);

    name = "EESRT tower event size EE +";
    EETowerSize_[1] = dqmStore_->bookProfile2D(name, name, 20, 0., 20., 20, 0., 20., 100, 0., 200., "s");
    EETowerSize_[1]->setAxisTitle("jx", 1);
    EETowerSize_[1]->setAxisTitle("jy", 2);

    name = "EESRT TT flag mismatch EE -";
    EETTFMismatch_[0] = dqmStore_->book2D(name, name, 100, 0., 100., 100, 0., 100.);
    EETTFMismatch_[0]->setAxisTitle("jx", 1);
    EETTFMismatch_[0]->setAxisTitle("jy", 2);

    name = "EESRT TT flag mismatch EE +";
    EETTFMismatch_[1] = dqmStore_->book2D(name, name, 100, 0., 100., 100, 0., 100.);
    EETTFMismatch_[1]->setAxisTitle("jx", 1);
    EETTFMismatch_[1]->setAxisTitle("jy", 2);

    name = "EESRT DCC event size";
    EEDccEventSize_ = dqmStore_->bookProfile(name, name, 18, 1, 19, 100, 0., 200., "s");
    EEDccEventSize_->setAxisTitle("event size (kB)", 2);
    for (int i = 0; i < 18; i++) {
      EEDccEventSize_->setBinLabel(i+1, Numbers::sEE(i+1).c_str(), 1);
    }

    name = "EESRT event size vs DCC";
    EEDccEventSizeMap_ = dqmStore_->book2D(name, name, 18, xbins, 132, ybins);
    EEDccEventSizeMap_->setAxisTitle("event size (kB)", 2);
    for (int i = 0; i < 18; i++) {
      EEDccEventSizeMap_->setBinLabel(i+1, Numbers::sEE(i+1).c_str(), 1);
    }

    name = "EESRT readout unit with SR forced EE -";
    EEReadoutUnitForcedBitMap_[0] = dqmStore_->book2D(name, name, 20, 0., 20., 20, 0., 20.);
    EEReadoutUnitForcedBitMap_[0]->setAxisTitle("jx", 1);
    EEReadoutUnitForcedBitMap_[0]->setAxisTitle("jy", 2);
    EEReadoutUnitForcedBitMap_[0]->setAxisTitle("rate", 3);

    name = "EESRT readout unit with SR forced EE +";
    EEReadoutUnitForcedBitMap_[1] = dqmStore_->book2D(name, name, 20, 0., 20., 20, 0., 20.);
    EEReadoutUnitForcedBitMap_[1]->setAxisTitle("jx", 1);
    EEReadoutUnitForcedBitMap_[1]->setAxisTitle("jy", 2);
    EEReadoutUnitForcedBitMap_[1]->setAxisTitle("rate", 3);

    name = "EESRT full readout SR Flags EE -";
    EEFullReadoutSRFlagMap_[0] = dqmStore_->book2D(name, name, 20, 0., 20., 20, 0., 20.);
    EEFullReadoutSRFlagMap_[0]->setAxisTitle("jx", 1);
    EEFullReadoutSRFlagMap_[0]->setAxisTitle("jy", 2);
    EEFullReadoutSRFlagMap_[0]->setAxisTitle("rate", 3);

    name = "EESRT full readout SR Flags EE +";
    EEFullReadoutSRFlagMap_[1] = dqmStore_->book2D(name, name, 20, 0., 20., 20, 0., 20.);
    EEFullReadoutSRFlagMap_[1]->setAxisTitle("jx", 1);
    EEFullReadoutSRFlagMap_[1]->setAxisTitle("jy", 2);
    EEFullReadoutSRFlagMap_[1]->setAxisTitle("rate", 3);

    name = "EESRT full readout SR Flags Number EE -";
    EEFullReadoutSRFlagCount_[0] = dqmStore_->book1D(name, name, 200, 0., 200.);
    EEFullReadoutSRFlagCount_[0]->setAxisTitle("Readout Units number", 1);

    name = "EESRT full readout SR Flags Number EE +";
    EEFullReadoutSRFlagCount_[1] = dqmStore_->book1D(name, name, 200, 0., 200.);
    EEFullReadoutSRFlagCount_[1]->setAxisTitle("Fully readout RU number", 1);

    name = "EESRT zero suppression 1 SR Flags EE -";
    EEZeroSuppression1SRFlagMap_[0] = dqmStore_->book2D(name, name, 20, 0., 20., 20, 0., 20.);
    EEZeroSuppression1SRFlagMap_[0]->setAxisTitle("jx", 1);
    EEZeroSuppression1SRFlagMap_[0]->setAxisTitle("jy", 2);
    EEZeroSuppression1SRFlagMap_[0]->setAxisTitle("rate", 3);

    name = "EESRT zero suppression 1 SR Flags EE +";
    EEZeroSuppression1SRFlagMap_[1] = dqmStore_->book2D(name, name, 20, 0., 20., 20, 0., 20.);
    EEZeroSuppression1SRFlagMap_[1]->setAxisTitle("jx", 1);
    EEZeroSuppression1SRFlagMap_[1]->setAxisTitle("jy", 2);
    EEZeroSuppression1SRFlagMap_[1]->setAxisTitle("rate", 3);

    name = "EESRT high interest TT Flags EE -";
    EEHighInterestTriggerTowerFlagMap_[0] = dqmStore_->book2D(name, name, 100, 0., 100., 100, 0., 100.);
    EEHighInterestTriggerTowerFlagMap_[0]->setAxisTitle("jx", 1);
    EEHighInterestTriggerTowerFlagMap_[0]->setAxisTitle("jy", 2);
    EEHighInterestTriggerTowerFlagMap_[0]->setAxisTitle("rate", 3);

    name = "EESRT high interest TT Flags EE +";
    EEHighInterestTriggerTowerFlagMap_[1] = dqmStore_->book2D(name, name, 100, 0., 100., 100, 0., 100.);
    EEHighInterestTriggerTowerFlagMap_[1]->setAxisTitle("jx", 1);
    EEHighInterestTriggerTowerFlagMap_[1]->setAxisTitle("jy", 2);
    EEHighInterestTriggerTowerFlagMap_[1]->setAxisTitle("rate", 3);

    name = "EESRT medium interest TT Flags EE -";
    EEMediumInterestTriggerTowerFlagMap_[0] = dqmStore_->book2D(name, name, 100, 0., 100., 100, 0., 100.);
    EEMediumInterestTriggerTowerFlagMap_[0]->setAxisTitle("jx", 1);
    EEMediumInterestTriggerTowerFlagMap_[0]->setAxisTitle("jy", 2);
    EEMediumInterestTriggerTowerFlagMap_[0]->setAxisTitle("rate", 3);

    name = "EESRT medium interest TT Flags EE +";
    EEMediumInterestTriggerTowerFlagMap_[1] = dqmStore_->book2D(name, name, 100, 0., 100., 100, 0., 100.);
    EEMediumInterestTriggerTowerFlagMap_[1]->setAxisTitle("jx", 1);
    EEMediumInterestTriggerTowerFlagMap_[1]->setAxisTitle("jy", 2);
    EEMediumInterestTriggerTowerFlagMap_[1]->setAxisTitle("rate", 3);

    name = "EESRT low interest TT Flags EE -";
    EELowInterestTriggerTowerFlagMap_[0] = dqmStore_->book2D(name, name, 100, 0., 100., 100, 0., 100.);
    EELowInterestTriggerTowerFlagMap_[0]->setAxisTitle("jx", 1);
    EELowInterestTriggerTowerFlagMap_[0]->setAxisTitle("jy", 2);
    EELowInterestTriggerTowerFlagMap_[0]->setAxisTitle("rate", 3);

    name = "EESRT low interest TT Flags EE +";
    EELowInterestTriggerTowerFlagMap_[1] = dqmStore_->book2D(name, name, 100, 0., 100., 100, 0., 100.);
    EELowInterestTriggerTowerFlagMap_[1]->setAxisTitle("jx", 1);
    EELowInterestTriggerTowerFlagMap_[1]->setAxisTitle("jy", 2);
    EELowInterestTriggerTowerFlagMap_[1]->setAxisTitle("rate", 3);

    name = "EESRT TT Flags EE -";
    EETTFlags_[0] = dqmStore_->book1D(name, name, 8, 0., 8.);
    EETTFlags_[0]->setAxisTitle("TT Flag value", 1);

    name = "EESRT TT Flags EE +";
    EETTFlags_[1] = dqmStore_->book1D(name, name, 8, 0., 8.);
    EETTFlags_[1]->setAxisTitle("TT Flag value", 1);

    name = "EESRT ZS Flagged Fully Readout EE -";
    EECompleteZSMap_[0] = dqmStore_->book2D(name, name, 20, 0., 20., 20, 0., 20.);
    EECompleteZSMap_[0]->setAxisTitle("jphi", 1);
    EECompleteZSMap_[0]->setAxisTitle("jeta", 2);
    EECompleteZSMap_[0]->setAxisTitle("rate", 3);

    name = "EESRT ZS Flagged Fully Readout EE +";
    EECompleteZSMap_[1] = dqmStore_->book2D(name, name, 20, 0., 20., 20, 0., 20.);
    EECompleteZSMap_[1]->setAxisTitle("jphi", 1);
    EECompleteZSMap_[1]->setAxisTitle("jeta", 2);
    EECompleteZSMap_[1]->setAxisTitle("rate", 3);

    name = "EESRT ZS Flagged Fully Readout Number EE -";
    EECompleteZSCount_[0] = dqmStore_->book1D(name, name, 20, 0., 20.);
    EECompleteZSCount_[0]->setAxisTitle("Readout Units number", 1);

    name = "EESRT ZS Flagged Fully Readout Number EE +";
    EECompleteZSCount_[1] = dqmStore_->book1D(name, name, 20, 0., 20.);
    EECompleteZSCount_[1]->setAxisTitle("Readout Units number", 1);

    name = "EESRT FR Flagged Dropped Readout EE -";
    EEDroppedFRMap_[0] = dqmStore_->book2D(name, name, 20, 0., 20., 20, 0., 20.);
    EEDroppedFRMap_[0]->setAxisTitle("jphi", 1);
    EEDroppedFRMap_[0]->setAxisTitle("jeta", 2);
    EEDroppedFRMap_[0]->setAxisTitle("rate", 3);

    name = "EESRT FR Flagged Dropped Readout EE +";
    EEDroppedFRMap_[1] = dqmStore_->book2D(name, name, 20, 0., 20., 20, 0., 20.);
    EEDroppedFRMap_[1]->setAxisTitle("jphi", 1);
    EEDroppedFRMap_[1]->setAxisTitle("jeta", 2);
    EEDroppedFRMap_[1]->setAxisTitle("rate", 3);

    name = "EESRT FR Flagged Dropped Readout Number EE -";
    EEDroppedFRCount_[0] = dqmStore_->book1D(name, name, 20, 0., 20.);
    EEDroppedFRCount_[0]->setAxisTitle("Readout Units number", 1);

    name = "EESRT FR Flagged Dropped Readout Number EE +";
    EEDroppedFRCount_[1] = dqmStore_->book1D(name, name, 20, 0., 20.);
    EEDroppedFRCount_[1]->setAxisTitle("Readout Units number", 1);

    name = "EESRT event size EE -";
    EEEventSize_[0] = dqmStore_->book1D(name, name, 100, 0, 200);
    EEEventSize_[0]->setAxisTitle("event size (kB)",1);

    name = "EESRT event size EE +";
    EEEventSize_[1] = dqmStore_->book1D(name, name, 100, 0, 200);
    EEEventSize_[1]->setAxisTitle("event size (kB)",1);

    name = "EESRT high interest payload EE -";
    EEHighInterestPayload_[0] =  dqmStore_->book1D(name, name, 100, 0, 200);
    EEHighInterestPayload_[0]->setAxisTitle("event size (kB)",1);

    name = "EESRT high interest payload EE +";
    EEHighInterestPayload_[1] =  dqmStore_->book1D(name, name, 100, 0, 200);
    EEHighInterestPayload_[1]->setAxisTitle("event size (kB)",1);

    name = "EESRT low interest payload EE -";
    EELowInterestPayload_[0] =  dqmStore_->book1D(name, name, 100, 0, 200);
    EELowInterestPayload_[0]->setAxisTitle("event size (kB)",1);

    name = "EESRT low interest payload EE +";
    EELowInterestPayload_[1] =  dqmStore_->book1D(name, name, 100, 0, 200);
    EELowInterestPayload_[1]->setAxisTitle("event size (kB)",1);

    name = "EESRT high interest ZS filter output EE -";
    EEHighInterestZsFIR_[0] = dqmStore_->book1D(name, name, 60, -30, 30);
    EEHighInterestZsFIR_[0]->setAxisTitle("ADC counts*4",1);

    name = "EESRT high interest ZS filter output EE +";
    EEHighInterestZsFIR_[1] = dqmStore_->book1D(name, name, 60, -30, 30);
    EEHighInterestZsFIR_[1]->setAxisTitle("ADC counts*4",1);

    name = "EESRT low interest ZS filter output EE -";
    EELowInterestZsFIR_[0] = dqmStore_->book1D(name, name, 60, -30, 30);
    EELowInterestZsFIR_[0]->setAxisTitle("ADC counts*4",1);

    name = "EESRT low interest ZS filter output EE +";
    EELowInterestZsFIR_[1] = dqmStore_->book1D(name, name, 60, -30, 30);
    EELowInterestZsFIR_[1]->setAxisTitle("ADC counts*4",1);

  }

}