|
|
|
#include <DTTracoChip.h>
Public Member Functions | |
| void | add_btiT (int step, int pos, const DTBtiTrigData *btitrig) |
| Add a BTI trigger to the TRACO. | |
| void | addTrig (int step, DTTracoTrig *) |
| Add a TRACO trigger. | |
| int | BTIC () const |
| BTIC parameter. | |
| void | calculateAngles (DTTracoTrig *) |
| Calculate trigger angles. | |
| void | clear () |
| Clear. | |
| GlobalPoint | CMSPosition () const |
| Position in CMS frame. | |
| DTConfigTraco * | config () const |
| Configuration set. | |
| int | DD () const |
| DD parameter. | |
| DTTracoChip (DTTracoCard *card, int n, DTConfigTraco *config) | |
| Constructor. | |
| DTTracoChip (const DTTracoChip &traco) | |
| Copy constructor. | |
| int | edgeBTI (int step, int io, int lr) const |
| flags for HTRIG in edge BTI | |
| DTTrigGeom * | geom () const |
| Return trigger geometry. | |
| int | IBTIOFF () const |
| IBTIOFF parameter. | |
| DTTracoId | id () const |
| Return TRACO id. | |
| int | KRad () const |
| K par of the radial angle of corr center referred to plane sl. | |
| LocalPoint | localPosition () const |
| Position in chamber frame. | |
| int | nTrig (int step) const |
| Return the number of trigger candidates. | |
| int | number () const |
| Return TRACO number. | |
| DTTracoChip & | operator= (const DTTracoChip &traco) |
| Assignment operator. | |
| int | ovlFlag (int step) |
| return overlap flag | |
| float | psiRad (int sl=0) const |
| Radial angle of correlator center in mrad referred to plane sl. | |
| void | raiseOverlap (int step) |
| raise overlap flag | |
| void | run () |
| Run TRACO algorithm. | |
| int | sector () const |
| Return sector number. | |
| void | setFlag (int step, int ext=0) |
| Set flags for multiple trigger detection between cons. TRACO's. | |
| void | setPV (int step, int ntrk, int code, int K) |
| Set the preview values for a TRACO trigger. | |
| int | station () const |
| Return station number. | |
| DTTracoTrig * | trigger (int step, unsigned n) const |
| Return the requested trigger. | |
| DTTracoTrigData | triggerData (int step, unsigned n) const |
| Return the data part of the requested trigger. | |
| int | useSecondTrack (int step) const |
| a flag for a usable second track | |
| int | wheel () const |
| Return wheel number. | |
| ~DTTracoChip () | |
| Destructor. | |
Private Member Functions | |
| int | AdjBtiLTSuppressed (DTTracoCand *candidate) |
| Do suppression of LTRIG on adjacent TRACO. | |
| DTTracoCand * | bestCand (int itk, std::vector< DTTracoCand > &tclist) |
| Get the best inner/outer candidate. | |
| void | DoAdjBtiLts (DTTracoCand *candidate, std::vector< DTTracoCand > &tclist) |
| Do suppression of LTRIG on BTI close to selected HTRIG. | |
| int | insideAngWindow (DTTracoTrig *) const |
| Check if a trigger is inside the angular acceptance window. | |
| DTTracoTrig * | setPV (int itk, DTTracoCand *inner, DTTracoCand *outer) |
| Set the preview for a trigger. | |
| void | setTracoAcceptances () |
| Compute traco chip acceptances. | |
| int | storeCorr (DTTracoTrig *tctrig, DTTracoCand *inner, DTTracoCand *outer, int tkn) |
| Check correlation and store correlated trigger. | |
| int | storeUncorr (DTTracoTrig *tctrig, DTTracoCand *inner, DTTracoCand *outer, int tkn) |
| Store uncorrelated trigger. | |
Private Attributes | |
| int | _btic |
| BitArray< DTConfigTraco::NSTEPL+2 > | _bxlts |
| DTTracoCard * | _card |
| DTConfigTraco * | _config |
| int | _dd |
| BitArray< 32 > | _flag [DTConfigTraco::NSTEPL-DTConfigTraco::NSTEPF+1] |
| DTTrigGeom * | _geom |
| int | _ibtioff |
| DTTracoId | _id |
| std::vector< DTTracoCand > | _innerCand [DTConfigTraco::NSTEPL-DTConfigTraco::NSTEPF+1] |
| int | _krad |
| DTTracoLUTs * | _luts |
| Lut * | _lutsCCB |
| std::vector< DTTracoCand > | _outerCand [DTConfigTraco::NSTEPL-DTConfigTraco::NSTEPF+1] |
| int | _PSIMAX [4 *DTConfig::NBTITC] |
| int | _PSIMIN [4 *DTConfig::NBTITC] |
| std::vector< DTTracoTrig * > | _tracotrig [DTConfigTraco::NSTEPL-DTConfigTraco::NSTEPF+1] |
Implementation of TRACO trigger algorithm. Internally uses DTTracoCand to store BTI triggers
Definition at line 55 of file DTTracoChip.h.
| DTTracoChip::DTTracoChip | ( | DTTracoCard * | card, |
| int | n, | ||
| DTConfigTraco * | config | ||
| ) |
Constructor.
Constructor for passing configuration
Definition at line 47 of file DTTracoChip.cc.
References _btic, _bxlts, _card, _flag, _geom, _ibtioff, _id, _innerCand, _krad, _luts, _lutsCCB, _outerCand, _tracotrig, DTConfigTraco::BTIC(), DTTrigGeom::cellPitch(), CMSPosition(), config(), DTTracoCard::config_luts(), gather_cfg::cout, debug, DTSuperLayerId, DTGeomSupplier::geom(), i, DTConfigTraco::KRAD(), KRad(), DTTrigGeom::localPosition(), DTTracoCard::lutFromDBFlag(), n, DTConfig::NBTITC, DTConfig::NSTEPF, DTConfig::NSTEPL, DTTrigGeom::phiSLOffset(), psiRad(), DTChamberId::sector(), setTracoAcceptances(), evf::utils::sid, DTTrigGeom::statId(), DTChamberId::station(), DTChamberId::wheel(), x, and BitArray< N >::zero().
:
_card(card), _config(conf) {
_geom = _card->geom();
// n=traco number 1,2,...
if(config()->debug()==4){
std::cout << "DTTracoChip constructor called for TRACO number " << n << std::endl;
}
// set acceptances from CMSSW geometry
setTracoAcceptances();
// reserve the appropriate amount of space for vectors
int i=0;
for(i=0;i<DTConfigTraco::NSTEPL - DTConfigTraco::NSTEPF;i++) {
_innerCand[i].reserve(DTConfigTraco::NBTITC);
_outerCand[i].reserve(3*DTConfigTraco::NBTITC);
_tracotrig[i].reserve(2);
}
// the identifier
DTChamberId sid = _geom->statId();
_id = DTTracoId(sid,n);
// Flags for LTS
_bxlts.zero();
for(int is=0;is<DTConfigTraco::NSTEPL-DTConfigTraco::NSTEPF+1;is++){
_flag[is].zero();
}
// debugging
if(config()->debug()==4){
std::cout << "CMS position:" << CMSPosition() << std::endl;
std::cout << " psiRad=" << psiRad() << " KRad=" << KRad() << std::endl;
}
//init traco parameters from traco config file
_krad = config()->KRAD();
_btic=config()->BTIC();
//offset from geometry (x1-x3 FE view): converted from cm to ST units (0.9999 for rounding)
_ibtioff=static_cast<int>(config()->BTIC()/(_geom->cellPitch())*(_geom->phiSLOffset()/0.9999));
// 091030 SV lut parameters from DB
// SV 08/12/12 : added flag for computing luts from DB parameters
if( _card->lutFromDBFlag()==1 )
{
//int board = int( (n-1)/4 );
//int traco = int(fmod( double(n-1),4.));
// 110208 SV for TRACO hardware bug included SL_shift
// SL shift
float xBTI1_3 = _geom->localPosition( DTBtiId(DTSuperLayerId(sid.wheel(),sid.station(),sid.sector(),3),1) ).x();
float xBTI1_1 = _geom->localPosition( DTBtiId(DTSuperLayerId(sid.wheel(),sid.station(),sid.sector(),1),1) ).x();
float SL_shift = xBTI1_3 - xBTI1_1;
_lutsCCB = new Lut(_card->config_luts(),n,SL_shift);
_luts = 0;
}
else
//this is always the case with new DTConfig SV 15/I/2007
//if( config()->trigSetupGeom()==0 ){
{
_luts = 0;
_lutsCCB = 0;
}
/*
//SV 21/V/03 for testbeam purpose: parameters from hardware setup
if(config()->trigSetupGeom()==1){
//init traco parameters
_dd=config()->DD();
_krad=config()->KRAD();
_btic=config()->BTIC();
_ibtioff=config()->IBTIOFF();
//const char* testfile = "traco"; //FIXTB
std::string testfile = "traco_";
int it = number() - 4 - 1;
if(it<10)
testfile += it+'0';
if(it>9){
testfile += int(float(it)/10.0) + '0'; //add decimal char
testfile += int(fmod(float(it),float(10))) + '0'; //add unit char
}
//const char* name = testfile;
if(config()->debug()==4)
std::cout << "Loading " << testfile << " luts for traco " << number() << std::endl;
_luts = new DTTracoLUTs(testfile);
_luts->reset();
_luts->load();
if(config()->debug()==4)
_luts->print();
}//end hardware setup
//TB 2004 setup : luts from minicrate ccb equations
if(config()->trigSetupGeom()==2){
int board = int( (n-1)/4 );
int traco = fmod( double(n-1),4. );
_lutsCCB = new Lut(sid.station(),board,traco);
// 091030 SV this constructur is obsolete now, use setForTestBeam instead
}//end TB2004
*/
}
| DTTracoChip::DTTracoChip | ( | const DTTracoChip & | traco | ) |
Copy constructor.
Definition at line 153 of file DTTracoChip.cc.
References _bxlts, _flag, _innerCand, _outerCand, _tracotrig, i, DTConfig::NBTITC, DTConfig::NSTEPF, DTConfig::NSTEPL, AlCaHLTBitMon_ParallelJobs::p, and p1.
: _geom(traco._geom), _id(traco._id), _card(traco._card), _luts(traco._luts) { int i=0; for(i=0;i<DTConfigTraco::NSTEPL - DTConfigTraco::NSTEPF;i++) { _innerCand[i].reserve(DTConfigTraco::NBTITC); std::vector<DTTracoCand>::const_iterator p; for(p=traco._innerCand[i].begin();p<traco._innerCand[i].end();p++) { _innerCand[i].push_back(*p); } _outerCand[i].reserve(3*DTConfigTraco::NBTITC); for(p=traco._outerCand[i].begin();p<traco._outerCand[i].end();p++) { _outerCand[i].push_back(*p); } _tracotrig[i].reserve(2); std::vector<DTTracoTrig*>::const_iterator p1; for(p1=traco._tracotrig[i].begin();p1<traco._tracotrig[i].end();p1++) { _tracotrig[i].push_back(*p1); } } _bxlts = traco._bxlts; for(int is=0;is<DTConfigTraco::NSTEPL-DTConfigTraco::NSTEPF+1;is++){ _flag[is] = traco._flag[is]; } }
| DTTracoChip::~DTTracoChip | ( | ) |
Destructor.
Definition at line 183 of file DTTracoChip.cc.
References _card, _lutsCCB, clear(), and DTTracoCard::lutFromDBFlag().
{
clear();
/*
if(config()->trigSetupGeom()==1){
_luts->reset();
delete _luts;
}
if(config()->trigSetupGeom()==2)
delete _lutsCCB;
*/
if( _card->lutFromDBFlag()==1 )
delete _lutsCCB;
}
| void DTTracoChip::add_btiT | ( | int | step, |
| int | pos, | ||
| const DTBtiTrigData * | btitrig | ||
| ) |
Add a BTI trigger to the TRACO.
Definition at line 990 of file DTTracoChip.cc.
References _bxlts, _card, _id, _innerCand, _outerCand, _PSIMAX, _PSIMIN, DTBtiTrigData::code(), config(), gather_cfg::cout, debug, DTConfigTraco::debug(), BitArray< N >::element(), DTBtiTrigData::K(), DTConfig::NBTITC, DTConfig::NSTEPF, DTConfig::NSTEPL, number(), pos, DTBtiTrigData::print(), BitArray< N >::set(), launcher::step, DTTracoId::traco(), and DTTracoCard::useAcceptParamFlag().
Referenced by DTTracoCard::loadTRACO().
{
if(pos<1 || pos>4*DTConfigTraco::NBTITC) {
std::cout << "DTTracoChip::add_btiT: wrong position: " << pos;
std::cout << "trigger not added!" << std::endl;
return;
}
if(step<DTConfigTraco::NSTEPF||step>DTConfigTraco::NSTEPL){
std::cout << "DTTracoChip::add_btiT: step out of range: " << step;
std::cout << "trigger not added!" << std::endl;
return;
}
if(!config()->usedBti(pos)) {
if(config()->debug()==4){
std::cout << "DTTracoChip::add_btiT: position: " << pos;
std::cout << "has disconnected bti" << std::endl;
}
return;
}
// 091103 SV: acceptances are taken from geometry if useAcceptParam()=false
// otherwise cuts based on LL,LH,CL,CH,RL,RH taken from configuration are applied in TracoCard::loadTraco
if(_card->useAcceptParamFlag()==false) {
// check K inside acceptance
if(btitrig->K()<_PSIMIN[pos-1] || btitrig->K()>_PSIMAX[pos-1] ) {
if(config()->debug()>1){
std::cout << "In TRACO num. " << number() << " BTI trig. in pos " << pos << " outside K acceptance (";
std::cout << _PSIMIN[pos-1] << "-->";
std::cout << _PSIMAX[pos-1] << ") - Not added" << std::endl;
}
return;
}
}
// Store trigger candidate
if(pos<=DTConfigTraco::NBTITC){
_innerCand[step-DTConfigTraco::NSTEPF].push_back(
DTTracoCand(this,btitrig,pos,step));
} else {
_outerCand[step-DTConfigTraco::NSTEPF].push_back(
DTTracoCand(this,btitrig,pos,step));
}
// Fill array for BX LTS
if(btitrig->code()==8){
for(int is=step-4;is<step;is++){ // set flag for 4 previous BX
if(is>0&&is<=DTConfigTraco::NSTEPL) _bxlts.set(is);
}
//SV 1/IV/04 BUG FIX
_bxlts.set(step+1);
// Debugging
if(config()->debug()==4)
for(int is=0;is<DTConfigTraco::NSTEPL;is++)
std::cout<<"_bxlts["<<is<<"]="<<_bxlts.element(is)<<std::endl;
}
// Debugging
if(config()->debug()>1){
std::cout << "BTI Trigger added at step " << step;
std::cout << " to TRACO " << _id.traco() << " at position " << pos << std::endl;
btitrig->print();
} // End debugging
}
| void DTTracoChip::addTrig | ( | int | step, |
| DTTracoTrig * | tctrig | ||
| ) |
Add a TRACO trigger.
Definition at line 1059 of file DTTracoChip.cc.
References _tracotrig, config(), gather_cfg::cout, debug, DTConfig::NSTEPF, DTConfig::NSTEPL, DTTracoTrig::print(), and launcher::step.
Referenced by run(), and DTTracoCard::storeTrigger().
{
if(step<DTConfigTraco::NSTEPF||step>DTConfigTraco::NSTEPL){
std::cout << "DTTracoChip::addTrig: step out of range: " << step;
std::cout << " trigger not added!" << std::endl;
return;
}
_tracotrig[step-DTConfigTraco::NSTEPF].push_back(tctrig);
// Debugging...
if(config()->debug()==4){
std::cout << "DTTracoChip::addTrig: adding trigger:"<< std::endl;
tctrig->print();
}
// End debugging
}
| int DTTracoChip::AdjBtiLTSuppressed | ( | DTTracoCand * | candidate | ) | [private] |
Do suppression of LTRIG on adjacent TRACO.
Definition at line 554 of file DTTracoChip.cc.
References _flag, DTTracoCand::BtiTrig(), DTBtiTrigData::code(), BitArray< N >::element(), DTConfig::NBTITC, DTConfig::NSTEPF, DTTracoCand::position(), and DTTracoCand::step().
Referenced by bestCand().
{
// If requested, do suppression of LTRIG on adjacent BTI -> obsolete!
//if(!(config()->adjBtiLts()) && candidate->BtiTrig()->code()<8) {
//SV: Ltrig always suppressed in hardware if Htrig in adj traco!
if(candidate->BtiTrig()->code()<8) {
if( _flag[candidate->step()-DTConfigTraco::NSTEPF].element(3) &&
candidate->position()==1 ) return 1;
if( _flag[candidate->step()-DTConfigTraco::NSTEPF].element(4) &&
candidate->position()==DTConfigTraco::NBTITC ) return 1;
if( _flag[candidate->step()-DTConfigTraco::NSTEPF].element(5) &&
candidate->position()== DTConfigTraco::NBTITC+1) return 1;
if( _flag[candidate->step()-DTConfigTraco::NSTEPF].element(6) &&
candidate->position()==DTConfigTraco::NBTITC*4 ) return 1;
}
//}
return 0;
}
| DTTracoCand * DTTracoChip::bestCand | ( | int | itk, |
| std::vector< DTTracoCand > & | tclist | ||
| ) | [private] |
Get the best inner/outer candidate.
Definition at line 471 of file DTTracoChip.cc.
References AdjBtiLTSuppressed(), config(), gather_cfg::cout, DTConfigTraco::debug(), i, AlCaHLTBitMon_ParallelJobs::p, DTConfigTraco::prefHtrig(), and DTConfigTraco::sortKascend().
Referenced by run().
{
// Return if no candidates
if(tclist.size()<1) return 0;
// stl function: sort in Ktc ascending or descending order according
// to user request comparing by default with user-defined <
// NB don't reverse if candidates are two with same K
stable_sort( tclist.begin(),tclist.end() ); //0=K ascending, 1=K descending
if(config()->sortKascend(itk) &&
!(tclist.size()==2 && tclist[0].K()==tclist[1].K()) ) {
reverse( tclist.begin(),tclist.end() );
if(config()->debug()==4)
std::cout << "Reversing order of sorted candidate list..." << std::endl;
}
/*
if(!config()->sortKascend(itk)){
stable_sort( tclist.begin(),tclist.end(),DTTracoCand::closer );
} else {
stable_sort( tclist.begin(),tclist.end(),DTTracoCand::wider );
}
*/
// debugging...
if(config()->debug()==4){
std::cout << "DTTracoChip::findBest - Looking for track number " << itk+1 << std::endl ;
std::cout << "Sorted std::vector of usable track candidates is:" << std::endl;
int i = 1;
for(std::vector<DTTracoCand>::iterator p=tclist.begin();p<tclist.end();p++){
if((*p).usable()){
std::cout << " DTTracoChip Candidate # " << i++;
(*p).print();
}
}
std::cout << "--------------------------------------------------" << std::endl;
}
// end debugging
// return the best candidate
int i=0;
DTTracoCand* bestltrig = 0;
std::vector<DTTracoCand>::iterator p;
for ( p = tclist.begin(); p < tclist.end(); ++p ) {
i++;
// candidate must be usable and not suppressed by LTS
if(AdjBtiLTSuppressed(&(*p)))
if(config()->debug()==4)
std::cout << "Candidate # " << i << " supp. because next to H in adiacent Tracos" << std::endl;
if ( (*p).usable() && !AdjBtiLTSuppressed(&(*p)) ) {
// check if preference to HTRIG is set and return first trigger
if( !config()->prefHtrig(itk) ) return &(*p);
if( (*p).BtiTrig()->code()==8 ) return &(*p);
if( bestltrig==0 ) bestltrig=&(*p);
}
}
return bestltrig;
}
| int DTTracoChip::BTIC | ( | ) | const [inline] |
BTIC parameter.
Definition at line 127 of file DTTracoChip.h.
References _btic.
Referenced by DTTracoCand::DTTracoCand(), storeCorr(), and storeUncorr().
{ return _btic; }
| void DTTracoChip::calculateAngles | ( | DTTracoTrig * | tct | ) |
Calculate trigger angles.
Definition at line 1210 of file DTTracoChip.cc.
References _card, _geom, _lutsCCB, DTTracoTrig::ChamberId(), DTGeomSupplier::CMSPosition(), config(), gather_cfg::cout, DTTracoTrig::data(), debug, Lut::get_k(), Lut::get_x(), DTTracoTrig::K(), DTTracoCard::localDirection(), DTTracoCard::lutFromDBFlag(), M_PI, PV3DBase< T, PVType, FrameType >::phi(), DTTrigGeom::phiCh(), DTTracoTrig::print(), DTTracoTrigData::qdec(), DTConfigTraco::RESOLPSI, DTConfigTraco::RESOLPSIR, DTChamberId::sector(), DTTracoTrig::setAngles(), DTChamberId::wheel(), PV3DBase< T, PVType, FrameType >::x(), DTTracoTrig::X(), and PV3DBase< T, PVType, FrameType >::z().
Referenced by storeCorr(), and storeUncorr().
{
int ipsi=0;
int iphir=0;
int idpsir=0;
/* obsolete
//TB 2004 luts formula from minicrate CCB
if( config()->trigSetupGeom()==2 ){
ipsi = _lutsCCB->get_k( (tct->K()+511) );
int flag = 0;
int qual=tct->data().qdec();
if(qual==3 || qual==1) //case 0:outer
flag=0;
if(qual==2 || qual==0) //case 1:inner
flag=1;
if(qual==6 || qual==5 || qual==4) //case 2:correlated
flag=2;
iphir = _lutsCCB->get_x( (tct->X()+512*flag) );
idpsir = ipsi - iphir/8;
}
//TB 2003 luts data format
if( config()->trigSetupGeom()==1 ){
//compute bending angles of traco output with lookup tables
//SV TB2003: first trigger board isn't connected;
ipsi = _luts->getPsi(tct->K());
int flag = 0;
int qual=tct->data().qdec();
if(qual==3 || qual==1) //case 0:outer
flag=0;
if(qual==2 || qual==0) //case 1:inner
flag=1;
if(qual==6 || qual==5 || qual==4) //case 2:correlated
flag=2;
iphir = _luts->getPhiRad( tct->X(), flag);
idpsir = _luts->getBendAng( tct->X(), tct->K(), flag);
}
*/
// 091030 SV angles computed from DB lut parameters
if( _card->lutFromDBFlag()==1 )
{
ipsi = _lutsCCB->get_k( (tct->K()+512) );
int flag = 0;
int qual=tct->data().qdec();
if(qual==3 || qual==1) //case 0:outer
flag=0;
if(qual==2 || qual==0) //case 1:inner
flag=1;
if(qual==6 || qual==5 || qual==4) //case 2:correlated
flag=2;
iphir = _lutsCCB->get_x( (tct->X()+512*flag) );
idpsir = ipsi - iphir/8;
}
else
// compute angles from CMSSW geometry
//if( config()->trigSetupGeom()==0 )
{
DTTracoTrigData td = tct->data();
// psi
// float fpsi = atan( (float)(tct->K()) * _geom->cellPitch() /
// (_geom->distSL() * config()->ST()) );
float fpsi = atan( _card->localDirection(&td).x() / // e.g. x>0 and
_card->localDirection(&td).z() ); // z<0 => fpsi<0
// Change sign in case of wheel<0 or wheel==0 and station == 1,4,5,8,9,12
int mywh = tct->ChamberId().wheel();
if (mywh<0 ||
(mywh==0 && (tct->ChamberId().sector()%4)<2))
fpsi = -fpsi;
fpsi*=DTConfigTraco::RESOLPSI;
if(fpsi<=0)
fpsi-=1.0;
ipsi = (int)fpsi;
// if outside range set to lower edge
if( ipsi>= DTConfigTraco::RESOLPSI || ipsi< -DTConfigTraco::RESOLPSI )
ipsi=-DTConfigTraco::RESOLPSI;
// psi_r
float fpsir = _card->CMSPosition(&td).phi()-_geom->phiCh();
if(fpsir<-M_PI)
fpsir+=M_PI*2;
if(fpsir>M_PI)
fpsir-=M_PI*2;
fpsir*=DTConfigTraco::RESOLPSIR;
if(fpsir<=0)
fpsir-=1.0;
iphir = (int)fpsir;
// if outside range set to lower edge
if( iphir>= DTConfigTraco::RESOLPSIR/2 || iphir <-DTConfigTraco::RESOLPSIR/2 )
iphir=-DTConfigTraco::RESOLPSIR/2;
// Delta(psi_r)
int dpsir = (iphir*DTConfigTraco::RESOLPSI) / DTConfigTraco::RESOLPSIR;
idpsir = ipsi-dpsir;
// if outside range set to lower edge
if(idpsir>= DTConfigTraco::RESOLPSI || idpsir <-DTConfigTraco::RESOLPSI )
idpsir=-DTConfigTraco::RESOLPSI;
}
tct->setAngles(ipsi,iphir,idpsir);
// debugging
if(config()->debug()==4){
std::cout << "DTTracoChip::calculateAngles :" << std::endl;
tct->print();
std::cout << std::dec << "K = " << tct->K() << " X = " << tct->X();
std::cout << " ipsi = " << ipsi << " iphir = " << iphir;
std::cout << " idpsir = " << idpsir << std::endl;
if( _card->lutFromDBFlag()==1 )
std::cout << "Angles are calculated from LUT parameters from DB!" << std::endl;
}// end debugging
}
| void DTTracoChip::clear | ( | void | ) |
Clear.
Definition at line 237 of file DTTracoChip.cc.
References _bxlts, _flag, _innerCand, _outerCand, _tracotrig, begin, DTConfig::NSTEPF, DTConfig::NSTEPL, p1, and BitArray< N >::zero().
Referenced by ~DTTracoChip().
{
std::vector<DTTracoTrig*>::iterator p1;
for(int is=0;is<DTConfigTraco::NSTEPL-DTConfigTraco::NSTEPF+1;is++){
for(p1=_tracotrig[is].begin();p1<_tracotrig[is].end();p1++){
delete (*p1);
}
_tracotrig[is].clear();
_innerCand[is].clear();
_outerCand[is].clear();
_flag[is].zero();
}
_bxlts.zero();
}
| GlobalPoint DTTracoChip::CMSPosition | ( | ) | const [inline] |
Position in CMS frame.
Definition at line 154 of file DTTracoChip.h.
References _geom, _id, and DTTrigGeom::CMSPosition().
Referenced by DTTracoChip().
{ return _geom->CMSPosition(_id); }
| DTConfigTraco* DTTracoChip::config | ( | void | ) | const [inline] |
Configuration set.
New Configuration set
Definition at line 117 of file DTTracoChip.h.
References _config.
Referenced by add_btiT(), addTrig(), bestCand(), calculateAngles(), DoAdjBtiLts(), DTTracoChip(), insideAngWindow(), run(), setFlag(), setPV(), setTracoAcceptances(), storeCorr(), and storeUncorr().
{ return _config; }
| int DTTracoChip::DD | ( | ) | const [inline] |
| void DTTracoChip::DoAdjBtiLts | ( | DTTracoCand * | candidate, |
| std::vector< DTTracoCand > & | tclist | ||
| ) | [private] |
Do suppression of LTRIG on BTI close to selected HTRIG.
Definition at line 532 of file DTTracoChip.cc.
References abs, DTBtiTrigData::btiNumber(), DTTracoCand::BtiTrig(), DTBtiTrigData::code(), config(), gather_cfg::cout, debug, and AlCaHLTBitMon_ParallelJobs::p.
Referenced by run().
{
// If requested, do suppression of LTRIG on BTI close to selected HTRIG in same traco
//if(!(config()->adjBtiLts()) && candidate->BtiTrig()->code()==8) {
// SV this is done always, not parametrized !!
if(candidate->BtiTrig()->code()==8) {
std::vector<DTTracoCand>::iterator p;
for(p=tclist.begin();p<tclist.end();p++){
if( (*p).BtiTrig()->code()<8 &&
abs( (*p).BtiTrig()->btiNumber() -
candidate->BtiTrig()->btiNumber() ) < 2 ) {
(*p).setUsed();
if(config()->debug()==4){
std::cout << "Candidate :";
(*p).print();
std::cout << "Suppressed because adiacent to H trig" <<std::endl;
} // end debug
} // end if
} // end candidate loop
} // end if H
}
| int DTTracoChip::edgeBTI | ( | int | step, |
| int | io, | ||
| int | lr | ||
| ) | const |
flags for HTRIG in edge BTI
Definition at line 1169 of file DTTracoChip.cc.
References _innerCand, _outerCand, begin, gather_cfg::cout, DTConfig::NBTITC, DTConfig::NSTEPF, DTConfig::NSTEPL, AlCaHLTBitMon_ParallelJobs::p, findQualityFiles::size, and launcher::step.
Referenced by setFlag().
{
if(step<DTConfigTraco::NSTEPF||step>DTConfigTraco::NSTEPL){
std::cout << "DTTracoChip::edgeBTI: step out of range: " << step;
std::cout << " 0 returned!" << std::endl;
return 0;
}
//
// inner supl ==> io=1; outer supl ==> io=2 |21 | | 22|
// right edge ==> rl=1; left edge ==> rl=2 |11 12|
//
std::vector<DTTracoCand>::const_iterator p;
if(io==1){
if(_innerCand[step-DTConfigTraco::NSTEPF].size()>0) {
// SV 24/IX/03 fix: only HTRIG accepted
for(p=_innerCand[step-DTConfigTraco::NSTEPF].begin();
p<_innerCand[step-DTConfigTraco::NSTEPF].end(); p++){
if(lr==1 && (*p).position()==1 && (*p).BtiTrig()->code()==8 )
return 1;
if(lr==2 && (*p).position()==DTConfigTraco::NBTITC && (*p).BtiTrig()->code()==8 )
return 1;
}
}
} else {
if(_outerCand[step-DTConfigTraco::NSTEPF].size()>0) {
for(p=_outerCand[step-DTConfigTraco::NSTEPF].begin();
p<_outerCand[step-DTConfigTraco::NSTEPF].end(); p++){
//SV: is the following correct???FIX if using _card to set _flag
//if(lr==1 && (*p).position()==DTConfigTraco::NBTITC+1)return 1; //or pos=8??
//if(lr==2 && (*p).position()==DTConfigTraco::NBTITC*4)return 1; //or pos=13??
//SV 24/IX/03 fix
if(lr==1 && (*p).position()==DTConfigTraco::NBTITC*3+1 && (*p).BtiTrig()->code()==8 )
return 1;
if(lr==2 && (*p).position()==DTConfigTraco::NBTITC*2 && (*p).BtiTrig()->code()==8 )
return 1;
}
}
}
return 0;
}
| DTTrigGeom* DTTracoChip::geom | ( | ) | const [inline] |
Return trigger geometry.
Definition at line 99 of file DTTracoChip.h.
References _geom.
Referenced by run().
{ return _geom; }
| int DTTracoChip::IBTIOFF | ( | ) | const [inline] |
IBTIOFF parameter.
Definition at line 130 of file DTTracoChip.h.
References _ibtioff.
Referenced by DTTracoCand::DTTracoCand().
{ return _ibtioff; }
| DTTracoId DTTracoChip::id | ( | void | ) | const [inline] |
Return TRACO id.
Definition at line 102 of file DTTracoChip.h.
References _id.
Referenced by DTTracoTrig::DTTracoTrig().
{ return _id; }
| int DTTracoChip::insideAngWindow | ( | DTTracoTrig * | tctrig | ) | const [private] |
Check if a trigger is inside the angular acceptance window.
Definition at line 1335 of file DTTracoChip.cc.
References BitArray< N >::assign(), DTConfigTraco::BendingAngleCut(), config(), gather_cfg::cout, debug, DTTracoTrig::DeltaPsiR(), BitArray< N >::element(), BitArray< N >::read(), and BitArray< N >::twoComplement().
Referenced by storeCorr(), and storeUncorr().
{
// check angular window for every station type
// return 1 for accept, 0 for reject
// abs value of bending angle is 9 bits
BitArray<10> bendAng;
bendAng.assign(0,10,tctrig->DeltaPsiR());
//bendAng.print();
if(bendAng.element(9)) //negativo!
bendAng.twoComplement();
int bendAngINT = bendAng.read(0,9);
//std::cout<<"abs bend angle int ="<< bendAngINT <<std::endl;
if( config()->BendingAngleCut()!= -1 &&
bendAngINT > 2*(config()->BendingAngleCut())) {
int absBendAng = tctrig->DeltaPsiR() & 0x1FF;
if(config()->debug()==4)
std::cout << "Attention: abs(bendAng)=" << absBendAng << " > "
<< 2*config()->BendingAngleCut() <<"!! reject trigger"<<std::endl;
return 0;
}
return 1;
}
| int DTTracoChip::KRad | ( | ) | const |
K par of the radial angle of corr center referred to plane sl.
Definition at line 1144 of file DTTracoChip.cc.
Referenced by DTTracoCand::DTTracoCand(), DTTracoChip(), and DTTracoCand::print().
| LocalPoint DTTracoChip::localPosition | ( | ) | const [inline] |
Position in chamber frame.
Definition at line 151 of file DTTracoChip.h.
References _geom, _id, and DTTrigGeom::localPosition().
{ return _geom->localPosition(_id); }
| int DTTracoChip::nTrig | ( | int | step | ) | const |
Return the number of trigger candidates.
Definition at line 1078 of file DTTracoChip.cc.
References _tracotrig, gather_cfg::cout, DTConfig::NSTEPF, DTConfig::NSTEPL, and launcher::step.
Referenced by run(), and DTTracoCard::runTRACO().
{
if(step<DTConfigTraco::NSTEPF||step>DTConfigTraco::NSTEPL){
std::cout << "DTTracoChip::nTrig: step out of range: " << step;
std::cout << " 0 returned!" << std::endl;
return 0;
}
return _tracotrig[step-DTConfigTraco::NSTEPF].size();
}
| int DTTracoChip::number | ( | ) | const [inline] |
Return TRACO number.
Definition at line 93 of file DTTracoChip.h.
References _id, and DTTracoId::traco().
Referenced by add_btiT().
| DTTracoChip & DTTracoChip::operator= | ( | const DTTracoChip & | traco | ) |
Assignment operator.
Definition at line 205 of file DTTracoChip.cc.
References _bxlts, _card, _flag, _geom, _id, _innerCand, _outerCand, _tracotrig, i, DTConfig::NBTITC, DTConfig::NSTEPF, DTConfig::NSTEPL, AlCaHLTBitMon_ParallelJobs::p, and p1.
{
if(this != &traco){
_geom = traco._geom;
_id = traco._id;
_card = traco._card;
int i=0;
for(i=0;i<DTConfigTraco::NSTEPL - DTConfigTraco::NSTEPF;i++) {
_innerCand[i].reserve(DTConfigTraco::NBTITC);
std::vector<DTTracoCand>::const_iterator p;
for(p=traco._innerCand[i].begin();p<traco._innerCand[i].end();p++) {
_innerCand[i].push_back(*p);
}
_outerCand[i].reserve(3*DTConfigTraco::NBTITC);
for(p=traco._outerCand[i].begin();p<traco._outerCand[i].end();p++) {
_outerCand[i].push_back(*p);
}
_tracotrig[i].reserve(2);
std::vector<DTTracoTrig*>::const_iterator p1;
for(p1=traco._tracotrig[i].begin();p1<traco._tracotrig[i].end();p1++) {
_tracotrig[i].push_back(*p1);
}
}
_bxlts = traco._bxlts;
for(int is=0;is<DTConfigTraco::NSTEPL-DTConfigTraco::NSTEPF+1;is++){
_flag[is] = traco._flag[is];
}
}
return *this;
}
| int DTTracoChip::ovlFlag | ( | int | step | ) | [inline] |
return overlap flag
Definition at line 160 of file DTTracoChip.h.
References _flag, BitArray< N >::element(), and DTConfig::NSTEPF.
{
return _flag[step-DTConfigTraco::NSTEPF].element(1);}
| float DTTracoChip::psiRad | ( | int | sl = 0 | ) | const |
Radial angle of correlator center in mrad referred to plane sl.
Definition at line 1122 of file DTTracoChip.cc.
Referenced by DTTracoChip().
{
/*
// Radial angle of correlator center in mrad in CMS frame
LocalPoint p = localPosition();
float x = p.x();
float y = p.y();
float z = p.z();
if (sl==1) {
z -= 0.5 * _geom->distSL();
} else if (sl==3) {
z += 0.5 * _geom->distSL();
}
float fpsir = _geom->stat()->toGlobal(LocalPoint(x,y,z)).phi()-
_geom->phiCh();
if(fpsir<-M_PI)fpsir+=M_PI*2;
if(fpsir>M_PI)fpsir-=M_PI*2;
return fpsir*1000;
*/
return 0.0;
}
| void DTTracoChip::raiseOverlap | ( | int | step | ) |
raise overlap flag
Definition at line 419 of file DTTracoChip.cc.
References _flag, DTConfig::NSTEPF, and BitArray< N >::set().
Referenced by run().
{
_flag[step-DTConfigTraco::NSTEPF].set(1); //overlap flag raised
_flag[step-DTConfigTraco::NSTEPF-1].set(2); //mark II rej.
}
| void DTTracoChip::run | ( | void | ) |
Run TRACO algorithm.
Definition at line 255 of file DTTracoChip.cc.
References _flag, _id, _innerCand, _outerCand, _tracotrig, addTrig(), bestCand(), config(), gather_cfg::cout, debug, DTConfigTraco::debug(), DoAdjBtiLts(), alignCSCRings::e, BitArray< N >::element(), geom(), SurfaceOrientation::inner, DTConfig::NBTITC, DTConfig::NSTEPF, DTConfig::NSTEPL, nTrig(), SurfaceOrientation::outer, DTTracoCand::print(), DTTracoTrig::print(), raiseOverlap(), BitArray< N >::set(), setFlag(), setPV(), DTTracoCand::setUsed(), findQualityFiles::size, storeCorr(), storeUncorr(), DTTracoId::traco(), and trigger().
Referenced by DTTracoCard::runTRACO().
{
// Debugging...
if(config()->debug()>1){
std::cout << "DTTracoChip::run: Processing TRACO " << _id.traco() << std::endl;
}
// End debugging
int maxtc = static_cast<int>(ceil( float(geom()->nCell(1)) / float(DTConfigTraco::NBTITC) ));
if( _id.traco()<1 || _id.traco()>maxtc ) {
if(config()->debug()==4)
std::cout << "DTTracoChip::run: wrong TRACO number " << _id.traco() << std::endl;
return;
}
// Loop on step
for(int is=DTConfigTraco::NSTEPF; is<=DTConfigTraco::NSTEPL;is++) {
if(config()->debug()>1){
std::cout << "\n STEP: " << is << std::endl;
std::cout << " ================" << std::endl;
}
// skip if no cand. at this step
if(_innerCand[is-DTConfigTraco::NSTEPF].size()<1 &&
_outerCand[is-DTConfigTraco::NSTEPF].size()<1 )
continue;
// Debugging...
if(config()->debug()==4){
std::cout << " --> " << _innerCand[is-DTConfigTraco::NSTEPF].size()+
_outerCand[is-DTConfigTraco::NSTEPF].size();
std::cout << " candidates " << std::endl;
}
// End debugging
// Multiple trigger detection between consecutive TRACO's
setFlag(is);
//check if there is a H in bx for LVALIDIFH flag
if(config()->LVALIDIFH()){
for(unsigned int e=0; e<_innerCand[is-DTConfigTraco::NSTEPF].size(); e++) {
if(_innerCand[is-DTConfigTraco::NSTEPF][e].BtiTrig()->code()==8){
_flag[is-DTConfigTraco::NSTEPF].set(9);
break;
}
}
for(unsigned int e=0; e<_outerCand[is-DTConfigTraco::NSTEPF].size(); e++) {
if(_outerCand[is-DTConfigTraco::NSTEPF][e].BtiTrig()->code()==8){
_flag[is-DTConfigTraco::NSTEPF].set(9);
break;
}
}
}
// Loop over first/second tracks
//for(int itk=0; itk < DTConfigTraco::NMAXCAND; itk++){
// FIX this hardcoded 2!!
for(int itk=0; itk < 2; itk++){
// Get the best inner and outer segments
if(config()->debug()==4)
std::cout << "Inner:" << std::endl;
DTTracoCand* inner = bestCand(itk,_innerCand[is-DTConfigTraco::NSTEPF]);
if(config()->debug()==4)
std::cout << "Outer:" << std::endl;
DTTracoCand* outer = bestCand(itk,_outerCand[is-DTConfigTraco::NSTEPF]);
//debug
if(config()->debug()>1){
if(inner || outer)
std::cout<<"Best candidates for track " << itk+1 << " are:"<<std::endl;
if(inner){
std::cout<<"inner->";
inner->print();
}
if(outer){
std::cout<<"outer->";
outer->print();
}
}
// Skip to next step if no suitable candidates found
if(inner==0&&outer==0)
break;
// suppression of LTRIG on BTI close to selected HTRIG
// SV 24/IX/03 : AND suppression of LTRIG close to H in adiacent Traco
// SV 31/III/03 : test : only if htprf is off--> NO, it's worse
// if( config()->prefHtrig(0) && config()->prefHtrig(1) ){
if(inner){
DoAdjBtiLts( inner, _innerCand[is-DTConfigTraco::NSTEPF] );
}
if(outer){
DoAdjBtiLts( outer, _outerCand[is-DTConfigTraco::NSTEPF] );
}
//}
// set candidates unusable by further steps
if(inner)inner->setUsed();
if(outer)outer->setUsed();
// Create a new TRACO trigger with preview for TS
DTTracoTrig* tct = setPV(itk,inner,outer);
// skip if no TRACO trigger has been created with this trigger
if(!tct) break; // something nasty happened. Go to next step
// try a correlation between segments
int stored = 0;
if(inner && outer) {
stored = storeCorr(tct,inner,outer,itk);
}
if (!stored) {
// No suitable candidate found or no correlation possible
// Fill single trigger
stored = storeUncorr(tct,inner,outer,itk);
}
// if trigger has been filled store it in TRACO, otherway delete it
if (stored) {
addTrig(is,tct);
} else {
delete tct;
//break;-> II track is computed even if no I track found...
}
} // end loop on first/second track
// Inhibit second track at previous bunch crossing
if(config()->debug()==4)
std::cout<<"Checking overlap I-II track..." <<std::endl;
if(_tracotrig[is-DTConfigTraco::NSTEPF].size()>0 && is>DTConfigTraco::NSTEPF
&& (_tracotrig[is-DTConfigTraco::NSTEPF])[0]->isFirst() ) { //I track at bx
if(nTrig(is-1)>0) { //there is a track at bx-1
if( !(trigger(is-1,1)->isFirst()) || //trig 1 is II track
( nTrig(is-1)==2 && !(trigger(is-1,2)->isFirst()) )) { //trig 2 is II track
raiseOverlap(is);
if(config()->debug()==4){
std::cout << "II track at step " << std::hex << is-1 <<std::dec << "marked rej."<< std::endl;
std::cout << "I track overlap flag at step " << std::hex << is << std::dec << " setted" << std::endl;
}
}
}
}
//debug...
for(int isd=0;isd<=DTConfigTraco::NSTEPL-DTConfigTraco::NSTEPF+1;isd++)
if(config()->debug()==4){
std::cout << "overlap flag step = " << isd+DTConfigTraco::NSTEPF <<
" " << _flag[isd].element(1) << std::endl;
}
// debugging...
if(config()->debug()>0){
if(nTrig(is)>0) {
for(int cc=1;cc<=nTrig(is);cc++){
trigger(is,cc)->print();
}
}
}// end debugging
}// end loop on step
}
| int DTTracoChip::sector | ( | void | ) | const [inline] |
Return sector number.
Definition at line 111 of file DTTracoChip.h.
References _geom, and DTTrigGeom::sector().
| void DTTracoChip::setFlag | ( | int | step, |
| int | ext = 0 |
||
| ) |
Set flags for multiple trigger detection between cons. TRACO's.
Definition at line 426 of file DTTracoChip.cc.
References _card, _flag, _id, config(), gather_cfg::cout, debug, edgeBTI(), BitArray< N >::element(), DTTracoCard::getTRACO(), i, DTConfig::NSTEPF, BitArray< N >::set(), and DTTracoId::traco().
Referenced by run().
{
if(ext==0){
//this is the original: flags from card
DTTracoChip* prevTraco = _card->getTRACO(_id.traco()-1);
if(prevTraco!=0){
if(prevTraco->edgeBTI(step,1,2))
_flag[step-DTConfigTraco::NSTEPF].set(3);
if(prevTraco->edgeBTI(step,2,2))
_flag[step-DTConfigTraco::NSTEPF].set(5);
}
DTTracoChip* nextTraco = _card->getTRACO(_id.traco()+1);
if(nextTraco!=0){
if(nextTraco->edgeBTI(step,1,1))
_flag[step-DTConfigTraco::NSTEPF].set(4);
if(nextTraco->edgeBTI(step,2,1))
_flag[step-DTConfigTraco::NSTEPF].set(6);
}
}
else{
//SV III/03: flags from input EXT: only for testing purpose
for(int i=0;i<6;i++){
int ibit = ext >> i;
if(ibit & 0x01) // bit i+1 -> flag 3,4,5,6 : IL,IR,OL,OR
_flag[step-DTConfigTraco::NSTEPF].set(i+1 + 2);
}
}
//debug:
if(config()->debug()==4){
std::cout << "Flags set for bx=" << step << std::endl;
std::cout << _flag[step-DTConfigTraco::NSTEPF].element(1)<< " ";
std::cout << _flag[step-DTConfigTraco::NSTEPF].element(2)<< " ";
std::cout << _flag[step-DTConfigTraco::NSTEPF].element(3)<< " ";
std::cout << _flag[step-DTConfigTraco::NSTEPF].element(4)<< " ";
std::cout << _flag[step-DTConfigTraco::NSTEPF].element(5)<< " ";
std::cout << _flag[step-DTConfigTraco::NSTEPF].element(6)<< " ";
std::cout << _flag[step-DTConfigTraco::NSTEPF].element(7)<< " ";
std::cout << _flag[step-DTConfigTraco::NSTEPF].element(8)<< " ";
std::cout << _flag[step-DTConfigTraco::NSTEPF].element(9)<< " "<<std::endl;
} //end debugging
}
| DTTracoTrig * DTTracoChip::setPV | ( | int | itk, |
| DTTracoCand * | inner, | ||
| DTTracoCand * | outer | ||
| ) | [private] |
Set the preview for a trigger.
Definition at line 573 of file DTTracoChip.cc.
References DTBtiTrigData::btiSL(), DTTracoCand::BtiTrig(), DTBtiTrigData::code(), config(), gather_cfg::cout, debug, first, SurfaceOrientation::inner, DTTracoCand::K(), SurfaceOrientation::outer, DTTracoCand::position(), DTConfigTraco::prefInner(), DTTracoCand::print(), DTTracoTrig::setPV(), and DTTracoCand::step().
{
// debugging...
if(config()->debug()==4){
std::cout << "DTTracoChip::setPV called for candidates : " << std::endl;
if(inner)inner->print();
if(outer)outer->print();
std::cout << "--------------------------------------------------" << std::endl;
}
//end debugging
// first or second track. This is tricky:
// itk=0 menas first track ==> first= true=1
// itk=1 menas second track ==> first=false=0
int first = (itk==0) ? 1 : 0;
//preview selector: the same as priority selector I !!
// select which of the inner/outer segments should be used
DTTracoCand* candidate=0;
if(inner!=0&&outer!=0) {
// if(config()->prefHtrig(itk)){
// ---> BUG! selection is ALWAYS for H trigs
// ---> fixed by Sara Vanini 25/III/03
if(inner->BtiTrig()->code()==8 && outer->BtiTrig()->code()<8 ){
candidate=inner;
} else if(inner->BtiTrig()->code()<8 && outer->BtiTrig()->code()==8){
candidate=outer;
} else { //for same quality tracks, pref. to in/out selection
if(!config()->prefInner(itk)) {
candidate=inner;
} else {
candidate=outer;
}
}
// } //end if(config()->prefHtrig...
/*
else {
if(!config()->prefInner(itk)) {
candidate=inner;
} else {
candidate=outer;
}
}
*/
} else if(inner==0&&outer!=0) {
candidate=outer;
} else if(inner!=0&&outer==0) {
candidate=inner;
} else {
return 0; // no candidates
}
// create new trigger with this candidate
DTTracoTrig* tct = new DTTracoTrig(this, candidate->step());
// store preview for TS
int cod = candidate->BtiTrig()->code();
if(candidate->BtiTrig()->btiSL()==1) cod *= 10;
// k output is 5 bits!!! SV
int K=candidate->K();
if(K>31)
K-=32;
int ioflag = 0;
if(candidate->position()>4)
ioflag = 1;
tct->setPV(first, cod, K, ioflag); // this is already BTI_K-KRAD
if(config()->debug()==4){
std::cout << "Selected candidate stored for preview is: ";
candidate->print();
}
return tct;
}
| void DTTracoChip::setPV | ( | int | step, |
| int | ntrk, | ||
| int | code, | ||
| int | K | ||
| ) |
Set the preview values for a TRACO trigger.
Referenced by run().
| void DTTracoChip::setTracoAcceptances | ( | ) | [private] |
Compute traco chip acceptances.
Definition at line 1361 of file DTTracoChip.cc.
References _geom, _PSIMAX, _PSIMIN, DTConfigTraco::BTIC(), DTTrigGeom::cellH(), DTTrigGeom::cellPitch(), config(), gather_cfg::cout, debug, DTTrigGeom::distSL(), h, i, DTConfig::NBTITC, and DTTrigGeom::phiSLOffset().
Referenced by DTTracoChip().
{
// Set K acceptances of DTTracoChip MT ports: Ktraco = Xinner - Xouter
float h = _geom->cellH();
float pitch = _geom->cellPitch();
float distsl = _geom->distSL();
float K0 = config()->BTIC();
float shiftSL = _geom->phiSLOffset() / pitch * K0;
// mt ports from orca geometry: this is always the case with new DTConfig
//if(config_traco(tracoid)->trigSetupGeom() != 1){
{
// Master Plane
int i = 0;
for(i=0;i<DTConfig::NBTITC;i++){
float Xin_min = (i + DTConfig::NBTITC) * K0 + shiftSL;
float Xin_max = Xin_min + K0;
float Xout_min = 0;
float Xout_max = 3 * DTConfig::NBTITC * K0;
_PSIMAX[i] = int( 2.*h/distsl * (Xin_max - Xout_min) + K0 + 1.01 );
_PSIMIN[i] = int( 2.*h/distsl * (Xin_min - Xout_max) + K0 );
}
// Slave Plane
for(i=0;i<3*DTConfig::NBTITC;i++){
float Xin_min = (DTConfig::NBTITC) * K0 + shiftSL;
float Xin_max = 2. * DTConfig::NBTITC * K0 + shiftSL;
float Xout_min = i * K0;
float Xout_max = Xout_min + K0;
_PSIMAX[DTConfig::NBTITC+i] = int( 2.*h/distsl * (Xin_max - Xout_min) + K0 + 1.01 );
_PSIMIN[DTConfig::NBTITC+i] = int( 2.*h/distsl * (Xin_min - Xout_max) + K0 );
}
}
// debugging
if(config()->debug()==4){
//if(wheel()==2&&station()==3&§or()==1){ // only 1 chamber
std::cout << "Acceptance of mt ports for offset (cell unit) "
<< _geom->phiSLOffset() / pitch << std::endl;
for(int i=0;i<4*DTConfig::NBTITC;i++){
std::cout << "Port " << i+1 << " : ";
std::cout << _PSIMIN[i] << " --> " << _PSIMAX[i] << std::endl;
}
//}
}// end debugging
}
| int DTTracoChip::station | ( | ) | const [inline] |
Return station number.
Definition at line 108 of file DTTracoChip.h.
References _geom, and DTTrigGeom::station().
| int DTTracoChip::storeCorr | ( | DTTracoTrig * | tctrig, |
| DTTracoCand * | inner, | ||
| DTTracoCand * | outer, | ||
| int | tkn | ||
| ) | [private] |
Check correlation and store correlated trigger.
Definition at line 648 of file DTTracoChip.cc.
References _bxlts, _geom, abs, DTTracoTrig::addDTBtiTrig(), BTIC(), DTBtiTrigData::btiNumber(), DTTracoCand::BtiTrig(), calculateAngles(), DTTrigGeom::cellH(), DTBtiTrigData::code(), DTTracoTrig::code(), config(), gather_cfg::cout, debug, DTConfigTraco::debug(), DTTrigGeom::distSL(), BitArray< N >::element(), DTBtiTrigData::eq(), insideAngWindow(), DTTracoTrig::K(), DTBtiTrigData::K(), DTTracoCand::print(), DTTracoTrig::qdec(), DTTracoTrig::resetVar(), DTTracoTrig::setCodeIn(), DTTracoTrig::setCodeOut(), DTTracoTrig::setEqIn(), DTTracoTrig::setEqOut(), DTTracoTrig::setK(), DTTracoTrig::setPosIn(), DTTracoTrig::setPosOut(), DTTracoTrig::setPVCorr(), DTTracoTrig::setX(), edm::shift, DTTracoTrig::step(), DTConfigTraco::TcBxLts(), DTConfigTraco::TcKToll(), DTTracoCand::X(), and DTTracoTrig::X().
Referenced by run().
{
// Bunch crossing
int is = tctrig->step();
// Debugging...
if(config()->debug()==4){
std::cout << "DTTracoChip::storeCorr called with candidates: " << std::endl;
if(inner)inner->print();
if(outer)outer->print();
std::cout << "--------------------------------------------------" << std::endl;
}
// End debugging
//old orca shift definition
float shift = 0.;
//if( config()->trigSetupGeom()!=1 )
shift = (int)( _geom->distSL()/_geom->cellH() + 0.5 );
//else
//shift = DD();
int kcor = 9999;
int xcor = 0;
int icor = 0;
// Check correlation only if --> this cuts LL follow by H in next 4 bx
// SV 1/IV/04 BUG FIX: this cuts LL preview also, traco outputs preview when LTS cut!!!
//if( !config()->TcBxLts() || // BX LTS is not enabled or
// !_bxlts.element(is) || // no HTRIG in next 4 BX or
// inner->BtiTrig()->code()==8 || // inner track is HTRIG or
// outer->BtiTrig()->code()==8 ){ // outer track is HTRIG
//otherwise in and out trig are L, and necessary one is suppressed for LTS
int xq1 = inner->X();
int xq2 = outer->X();
xcor = (xq2+xq1)/2;
kcor = (xq1-xq2)+512;
int kq1 = int(shift/2.) * (inner->BtiTrig()->K()-BTIC()) + 512;
int kq2 = int(shift/2.) * (outer->BtiTrig()->K()-BTIC()) + 512;
//int kd1 = abs(kcor/16-kq1/16);
//int kd2 = abs(kcor/16-kq2/16);
int kd1 = abs(kcor/16-kq1/16);
int kd2 = abs(kcor/16-kq2/16);
icor = kd1<=config()->TcKToll(tkn) &&
kd2<=config()->TcKToll(tkn) &&
xcor>0;
// Debugging...
if(config()->debug()==4){
std::cout << "*************************************************************";
std::cout << std::endl;
std::cout << " shift = " << shift;
std::cout << " xq1 = " << xq1;
std::cout << " xq2 = " << xq2;
std::cout << " xcor = " << xcor;
std::cout << " kcor = " << kcor;
std::cout << " kq1 = " << kq1;
std::cout << " kq2 = " << kq2;
std::cout << " kd1 = " << kd1;
std::cout << " kd2 = " << kd2;
std::cout << " icor = " << icor;
std::cout << std::endl;
std::cout << "*************************************************************";
std::cout << std::endl;
}// End debugging
//}//end if TcBxLts....
if(icor){
// correlation was successfull
// set the preview correlation bit. It isn't reset if outside ang. window
tctrig->setPVCorr(1);
// set K and X
tctrig->setK(kcor - 512);
//std::cout<<"Set K " << kcor << " instead of " << kcor-512 << std::endl;
//tctrig->setK(kcor);
tctrig->setX(xcor);
// set codes
tctrig->setCodeIn( inner->BtiTrig()->code());
tctrig->setCodeOut(outer->BtiTrig()->code());
// set position mask
//tctrig->setPosIn(inner->position());
//tctrig->setPosOut(outer->position());
//SV number of bti instead of position...
tctrig->setPosIn( inner->BtiTrig()->btiNumber() );
tctrig->setPosOut( outer->BtiTrig()->btiNumber() );
//SV store also equation: pattern numbers are 1-32
tctrig->setEqIn( inner->BtiTrig()->eq() + 1 );
tctrig->setEqOut( outer->BtiTrig()->eq() + 1 );
// calculate psi, psi_r and Delta(psi_r)
calculateAngles(tctrig);
// check angular window for LL --> fixed by SV 27/III/03 --> NO, for all!
//if( (tctrig->qdec()==4) && !insideAngWindow(tctrig)) {
if( !insideAngWindow(tctrig) ) {
// reset codes, K, X and angles
tctrig->resetVar() ;
}
//SV 1/IV/04 BUG FIX: check LTS after angle cut...
else if( tctrig->qdec()==4 && // cut only LL
config()->TcBxLts() ){ // BX LTS is enabled or
// reset codes, K, X and angles
if(tkn==0 && _bxlts.element(is) ) // I track : there is H -4,+1
tctrig->resetVar() ;
if(tkn==1 && _bxlts.element(is+1) ) // II track : there is H -4,+1 1 bx later
tctrig->resetVar() ;
}
else {
// set links to BTI triggers
tctrig->addDTBtiTrig(inner->BtiTrig());
tctrig->addDTBtiTrig(outer->BtiTrig());
}
// Debugging...
if(config()->debug()>1){
std::cout << "*************************************************************";
std::cout << std::endl;
std::cout << " Correlation was successfull: ";
std::cout << std::endl;
std::cout << " Code = " << tctrig->code();
std::cout << " K = " << tctrig->K();
std::cout << " X = " << tctrig->X();
std::cout << std::endl;
std::cout << "*************************************************************";
std::cout << std::endl;
}
// End debugging
} else {
// Debugging...
if(config()->debug()>1){
std::cout << "*************************************************************";
std::cout << std::endl;
std::cout << " No correlation possible ";
std::cout << std::endl;
std::cout << "*************************************************************";
std::cout << std::endl;
}
// End debugging
}
return icor;
}
| int DTTracoChip::storeUncorr | ( | DTTracoTrig * | tctrig, |
| DTTracoCand * | inner, | ||
| DTTracoCand * | outer, | ||
| int | tkn | ||
| ) | [private] |
Store uncorrelated trigger.
Definition at line 796 of file DTTracoChip.cc.
References _bxlts, _card, _flag, _geom, DTTracoTrig::addDTBtiTrig(), BTIC(), DTBtiTrigData::btiNumber(), DTBtiTrigData::btiSL(), DTTracoCand::BtiTrig(), calculateAngles(), DTTrigGeom::cellH(), DTBtiTrigData::code(), DTTracoTrig::code(), config(), gather_cfg::cout, debug, DTConfigTraco::debug(), DTTrigGeom::distSL(), BitArray< N >::element(), DTBtiTrigData::eq(), SurfaceOrientation::inner, insideAngWindow(), DTTracoTrig::K(), DTBtiTrigData::K(), DTConfigTraco::LVALIDIFH(), DTTSTheta::nHTrig(), DTConfig::NSTEPF, DTTSTheta::nTrig(), SurfaceOrientation::outer, DTConfigTraco::prefInner(), DTTracoCand::print(), DTTracoTrig::resetVar(), DTTracoTrig::setCodeIn(), DTTracoTrig::setCodeOut(), DTTracoTrig::setEqIn(), DTTracoTrig::setEqOut(), DTTracoTrig::setK(), DTTracoTrig::setPosIn(), DTTracoTrig::setPosOut(), DTTracoTrig::setPVCorr(), DTTracoCand::setUnused(), DTTracoTrig::setX(), edm::shift, DTConfigTraco::singleLenab(), DTConfigTraco::singleLflag(), DTTracoTrig::step(), DTConfigTraco::TcReuse(), DTTracoCard::TSTh(), DTTracoCand::X(), and DTTracoTrig::X().
Referenced by run().
{
// Bunch crossing
int is = tctrig->step();
// Debugging...
if(config()->debug()==4){
std::cout << "DTTracoChip::storeUncorr called with candidates: " << std::endl;
if(inner)inner->print();
if(outer)outer->print();
std::cout << "--------------------------------------------------" << std::endl;
}
// End debugging
// priority selector
// select which of the inner/outer segments should be used
// allow re-use of other segment according to configuration
DTTracoCand* candidate=0;
if(inner!=0&&outer!=0) {
// if(config()->prefHtrig(tkn)){
// --> BUG: selector I preference is ALWAYS for H trig
// fixed by Sara Vanini - 25/III/03
if(inner->BtiTrig()->code()==8 && outer->BtiTrig()->code()<8 ){
candidate=inner;
//if(config()->TcReuse(1)) outer->setUnused(); // reusable
} else if(inner->BtiTrig()->code()<8 && outer->BtiTrig()->code()==8){
candidate=outer;
//if(config()->TcReuse(0)) inner->setUnused(); // reusable
} else { //for the same quality triggers:
if(!config()->prefInner(tkn)) {
candidate=inner;
//if(config()->TcReuse(1)) outer->setUnused(); // reusable
} else {
candidate=outer;
//if(config()->TcReuse(0)) inner->setUnused(); // reusable
}
}//end else
/*
} else {//no Htrig preference
if(!config()->prefInner(tkn)) {
candidate=inner;
if(config()->TcReuse(1)) outer->setUnused(); // reusable
} else {
candidate=outer;
if(config()->TcReuse(0)) inner->setUnused(); // reusable
}
}
*/
} else if(inner==0&&outer!=0) {
candidate=outer;
} else if(inner!=0&&outer==0) {
candidate=inner;
} else {
return 0; // no candidates
}
//SV *** FOR TESTBEAM OR TEST BENCH PURPOSE ***
//theta trigger bin present(1) or absent(0)
//int thTr = (_flag[is-DTConfigTraco::NSTEPF].element(7)) ?
// _flag[is-DTConfigTraco::NSTEPF].element(7):
// _flag[is-DTConfigTraco::NSTEPF].element(8);
// priority selector II: accept or discard candidate according to masks:
// ** LOW TRIGGERS
if( candidate->BtiTrig()->code()<8 ) {
// first check with LVALIDIFH: if 1, accept low if there is a H in traco at bx
if(config()->LVALIDIFH() && _flag[is-DTConfigTraco::NSTEPF].element(9)){
if(config()->debug()>1)
std::cout << "Low accepted because LVALIDIFH on...." << std::endl;
}
else {//LVALIDIFH==0 or there isn't H in traco in bx : check theta!
//theta check
if( !config()->singleLenab(tkn) ) {
// LTF: single LTRIG not always en. Check cond.:
if( config()->singleLflag(tkn)==1 || //always discarded
( config()->singleLflag(tkn)==2 && !(_card->TSTh()->nHTrig(is)) ) ||
( config()->singleLflag(tkn)==0 && !(_card->TSTh()->nTrig(is)) ) ){
// SV --> for TESTS version
// config()->singleLflag(tkn)==0 && thTr==0 || //only with theta trig.
// config()->singleLflag(tkn)==2 && thTr==0 ){ //only with theta H trig (not hw)
if(config()->debug()>1)
std::cout << "Single low trigger discarded by preview and "
<< "priority selector for ltmsk!" <<std::endl;
return 0;}
// ^-------- trigger is suppressed and will not be stored
}//end theta
} //end else
//REUSE : mark candidates reusable HERE! SV BUG FIX 6IV04
if(candidate==inner && config()->TcReuse(1) && outer)
outer->setUnused();
if(candidate==outer && config()->TcReuse(0) && inner)
inner->setUnused();
// LTS suppression
if(config()->TcBxLts()){
if( (tkn==0 && _bxlts.element(is)) // I track : there is H -4,+1
||
(tkn==1 && _bxlts.element(is+1)) ){ // II track : there is H -4,+1 1 bx later
tctrig->resetVar() ;
if(config()->debug()>1)
std::cout << "Low trigger suppressed because H in next 4 bx "<<
" and LTS flag on...." << std::endl;
return 1; // trigger is suppressed but preview will be stored
}
}//end lts
// } //end else
} //Low trigs
// Preview Htmsk not implemented: awaiting decision
// --> implemented in priority selector by SV
else { // HTRIG
//if(config()->singleHflag(tkn)==1 && thTr==0 ) //this is for testing
if( config()->singleHflag(tkn)==1 && !(_card->TSTh()->nTrig(is) ) )
return 0;
// ^-----trigger is suppressed and will not be stored
//mark candidates reusable HERE! SV BUG FIX 6IV04
if(candidate==inner && config()->TcReuse(1) && outer)
outer->setUnused();
if(candidate==outer && config()->TcReuse(0) && inner)
inner->setUnused();
}
// set code, position, K and X
float shift;
//if(config()->trigSetupGeom()!=1 )
shift = (int)( _geom->distSL()/_geom->cellH() + 0.5 );
//else
//shift = DD(); //SV 19/III/03
int kucor = (int)( 0.5*shift * (candidate->BtiTrig()->K()-BTIC()) );
tctrig->setK(kucor);
tctrig->setX( candidate->X() );
// correlation wasn't successfull
// set the preview correlation bit.
tctrig->setPVCorr(0);
if(candidate->BtiTrig()->btiSL()==1){ // inner track
tctrig->setCodeIn(candidate->BtiTrig()->code());
tctrig->setCodeOut(0);
//tctrig->setPosIn(candidate->position());
//SV number of bti instead of position...
tctrig->setPosIn(candidate->BtiTrig()->btiNumber() );
tctrig->setPosOut(0);
//SV store also equation
tctrig->setEqIn( candidate->BtiTrig()->eq() + 1 );
tctrig->setEqOut( 0 );
} else { // outer track
tctrig->setCodeIn(0);
tctrig->setCodeOut(candidate->BtiTrig()->code());
tctrig->setPosIn(0);
//SV number of bti instead of position...
tctrig->setPosOut(candidate->BtiTrig()->btiNumber() );
//tctrig->setPosOut(candidate->position());
//SV store also equation
tctrig->setEqIn( 0 );
tctrig->setEqOut( candidate->BtiTrig()->eq() + 1);
}
// coordinate converter LUT
// calculate psi, psi_r and Delta(psi_r)
calculateAngles(tctrig);
// check angular window only for Low!! --> fixed SV 27/III/03--> NO, for all!
//if( candidate->BtiTrig()->code() < 8 && !insideAngWindow(tctrig) ){
if( !insideAngWindow(tctrig) ){
// reset codes, K, X and angles
tctrig->resetVar() ;
if(config()->debug()>1)
std::cout << "L rejected because outside angular window!" << std::endl;
} else {
// set links to BTI trigger
tctrig->addDTBtiTrig(candidate->BtiTrig());
}
// Debugging...
if(config()->debug()>1){
std::cout << "*************************************************************";
std::cout << std::endl;
std::cout << " Single trigger stored: ";
std::cout << std::endl;
std::cout << " Code = " << tctrig->code();
std::cout << " K = " << tctrig->K();
std::cout << " X = " << tctrig->X();
std::cout << std::endl;
std::cout << "*************************************************************";
std::cout << std::endl;
}
// End debugging
return 1;
}
| DTTracoTrig * DTTracoChip::trigger | ( | int | step, |
| unsigned | n | ||
| ) | const |
Return the requested trigger.
Definition at line 1088 of file DTTracoChip.cc.
References _tracotrig, gather_cfg::cout, n, DTConfig::NSTEPF, DTConfig::NSTEPL, AlCaHLTBitMon_ParallelJobs::p, findQualityFiles::size, and launcher::step.
Referenced by run().
{
if(step<DTConfigTraco::NSTEPF||step>DTConfigTraco::NSTEPL){
std::cout << "DTTracoChip::trigger: step out of range: " << step;
std::cout << " empty pointer returned!" << std::endl;
return 0;
}
if(n<1 || n>_tracotrig[step-DTConfigTraco::NSTEPF].size()) {
std::cout << "DTTracoChip::trigger: requested trigger doesn't exist: " << n;
std::cout << " empty pointer returned!" << std::endl;
return 0;
}
std::vector<DTTracoTrig*>::const_iterator p =
_tracotrig[step-DTConfigTraco::NSTEPF].begin()+n-1;
return *p;
}
| DTTracoTrigData DTTracoChip::triggerData | ( | int | step, |
| unsigned | n | ||
| ) | const |
Return the data part of the requested trigger.
Definition at line 1105 of file DTTracoChip.cc.
References _tracotrig, gather_cfg::cout, n, DTConfig::NSTEPF, DTConfig::NSTEPL, AlCaHLTBitMon_ParallelJobs::p, findQualityFiles::size, and launcher::step.
Referenced by DTTracoCard::runTRACO().
{
if(step<DTConfigTraco::NSTEPF||step>DTConfigTraco::NSTEPL){
std::cout << "DTTracoChip::triggerData: step out of range: " << step;
std::cout << " dummy trigger returned!" << std::endl;
return DTTracoTrigData();
}
if(n<1 || n>_tracotrig[step-DTConfigTraco::NSTEPF].size()) {
std::cout << "DTTracoChip::trigger: requested trigger doesn't exist: " << n;
std::cout << " dummy trigger returned!" << std::endl;
return DTTracoTrigData();
}
std::vector<DTTracoTrig*>::const_iterator p =
_tracotrig[step-DTConfigTraco::NSTEPF].begin()+n-1;
return (*p)->data();
}
| int DTTracoChip::useSecondTrack | ( | int | step | ) | const |
a flag for a usable second track
Definition at line 1157 of file DTTracoChip.cc.
References _flag, gather_cfg::cout, BitArray< N >::element(), DTConfig::NSTEPF, DTConfig::NSTEPL, and launcher::step.
Referenced by DTTracoCard::runTRACO().
{
// return 1 if II track use is allow
// return 0 if II track has been rejected
if(step<DTConfigTraco::NSTEPF||step>DTConfigTraco::NSTEPL){
std::cout << "DTTracoChip::useSecondTrack: step out of range: " << step;
std::cout << " 0 returned!" << std::endl;
return 0;
}
return !(_flag[step-DTConfigTraco::NSTEPF].element(2));
}
| int DTTracoChip::wheel | ( | ) | const [inline] |
Return wheel number.
Definition at line 105 of file DTTracoChip.h.
References _geom, and DTTrigGeom::wheel().
int DTTracoChip::_btic [private] |
Definition at line 199 of file DTTracoChip.h.
Referenced by BTIC(), and DTTracoChip().
BitArray<DTConfigTraco::NSTEPL+2> DTTracoChip::_bxlts [private] |
Definition at line 211 of file DTTracoChip.h.
Referenced by add_btiT(), clear(), DTTracoChip(), operator=(), storeCorr(), and storeUncorr().
DTTracoCard* DTTracoChip::_card [private] |
Definition at line 194 of file DTTracoChip.h.
Referenced by add_btiT(), calculateAngles(), DTTracoChip(), operator=(), setFlag(), storeUncorr(), and ~DTTracoChip().
DTConfigTraco* DTTracoChip::_config [private] |
Definition at line 196 of file DTTracoChip.h.
Referenced by config().
int DTTracoChip::_dd [private] |
Definition at line 201 of file DTTracoChip.h.
Referenced by DD().
BitArray<32> DTTracoChip::_flag[DTConfigTraco::NSTEPL-DTConfigTraco::NSTEPF+1] [private] |
Definition at line 217 of file DTTracoChip.h.
Referenced by AdjBtiLTSuppressed(), clear(), DTTracoChip(), operator=(), ovlFlag(), raiseOverlap(), run(), setFlag(), storeUncorr(), and useSecondTrack().
DTTrigGeom* DTTracoChip::_geom [private] |
Definition at line 191 of file DTTracoChip.h.
Referenced by calculateAngles(), CMSPosition(), DTTracoChip(), geom(), localPosition(), operator=(), sector(), setTracoAcceptances(), station(), storeCorr(), storeUncorr(), and wheel().
int DTTracoChip::_ibtioff [private] |
Definition at line 200 of file DTTracoChip.h.
Referenced by DTTracoChip(), and IBTIOFF().
DTTracoId DTTracoChip::_id [private] |
Definition at line 192 of file DTTracoChip.h.
Referenced by add_btiT(), CMSPosition(), DTTracoChip(), id(), localPosition(), number(), operator=(), run(), and setFlag().
std::vector<DTTracoCand> DTTracoChip::_innerCand[DTConfigTraco::NSTEPL-DTConfigTraco::NSTEPF+1] [private] |
Definition at line 204 of file DTTracoChip.h.
Referenced by add_btiT(), clear(), DTTracoChip(), edgeBTI(), operator=(), and run().
int DTTracoChip::_krad [private] |
Definition at line 198 of file DTTracoChip.h.
Referenced by DTTracoChip().
DTTracoLUTs* DTTracoChip::_luts [private] |
Definition at line 224 of file DTTracoChip.h.
Referenced by DTTracoChip().
Lut* DTTracoChip::_lutsCCB [private] |
Definition at line 226 of file DTTracoChip.h.
Referenced by calculateAngles(), DTTracoChip(), and ~DTTracoChip().
std::vector<DTTracoCand> DTTracoChip::_outerCand[DTConfigTraco::NSTEPL-DTConfigTraco::NSTEPF+1] [private] |
Definition at line 205 of file DTTracoChip.h.
Referenced by add_btiT(), clear(), DTTracoChip(), edgeBTI(), operator=(), and run().
int DTTracoChip::_PSIMAX[4 *DTConfig::NBTITC] [private] |
Definition at line 221 of file DTTracoChip.h.
Referenced by add_btiT(), and setTracoAcceptances().
int DTTracoChip::_PSIMIN[4 *DTConfig::NBTITC] [private] |
Definition at line 220 of file DTTracoChip.h.
Referenced by add_btiT(), and setTracoAcceptances().
std::vector<DTTracoTrig*> DTTracoChip::_tracotrig[DTConfigTraco::NSTEPL-DTConfigTraco::NSTEPF+1] [private] |
Definition at line 208 of file DTTracoChip.h.
Referenced by addTrig(), clear(), DTTracoChip(), nTrig(), operator=(), run(), trigger(), and triggerData().
1.7.3