#include <HLTMuonMatchAndPlot.h>

Public Member Functions
void	analyze (const edm::Event &, const edm::EventSetup &)
void	beginRun (const edm::Run &, const edm::EventSetup &)
void	endRun (const edm::Run &, const edm::EventSetup &)
void	fillEdges (size_t &nBins, float *&edges, std::vector< double > binning)
template<class T >
void	fillMapFromPSet (map< string, T > &m, ParameterSet pset, string target)
template<class T >
void	fillMapFromPSet (std::map< std::string, T > &, edm::ParameterSet, std::string)
	HLTMuonMatchAndPlot (const edm::ParameterSet &, std::string, std::vector< std::string >)
	Constructor.
template<class T1 , class T2 >
vector< size_t >	matchByDeltaR (const vector< T1 > &collection1, const vector< T2 > &collection2, const double maxDeltaR)
template<class T1 , class T2 >
std::vector< size_t >	matchByDeltaR (const std::vector< T1 > &, const std::vector< T2 > &, const double maxDeltaR=NOMATCH)
Private Member Functions
void	book1D (std::string, std::string, std::string)
void	book2D (std::string, std::string, std::string, std::string)
reco::MuonCollection	selectedMuons (const reco::MuonCollection &, const reco::BeamSpot &, bool, const StringCutObjectSelector< reco::Muon > &, double, double)
trigger::TriggerObjectCollection	selectedTriggerObjects (const trigger::TriggerObjectCollection &, const trigger::TriggerEvent &, const edm::ParameterSet &)
Private Attributes
std::map< std::string, std::vector< double > >	binParams_
unsigned int	cutMinPt_
DQMStore *	dbe_
std::string	destination_
bool	hasProbeRecoCuts
bool	hasTargetRecoCuts
std::map< std::string, MonitorElement * >	hists_
std::string	hltPath_
std::string	hltProcessName_
std::map< std::string, edm::InputTag >	inputTags_
std::vector< std::string >	moduleLabels_
std::map< std::string, double >	plotCuts_
double	probeD0Cut_
StringCutObjectSelector < reco::Muon >	probeMuonSelector_
edm::ParameterSet	probeParams_
double	probeZ0Cut_
std::vector< std::string >	requiredTriggers_
double	targetD0Cut_
StringCutObjectSelector < reco::Muon >	targetMuonSelector_
edm::ParameterSet	targetParams_
double	targetZ0Cut_
std::string	triggerLevel_

Detailed Description

Match reconstructed muons to HLT objects and plot efficiencies.

Note that this is not a true EDAnalyzer; rather, the intent is that one EDAnalyzer would call a separate instantiation of HLTMuonMatchAndPlot for each HLT path under consideration.

Documentation available on the CMS TWiki: https://twiki.cern.ch/twiki/bin/view/CMS/MuonHLTOfflinePerformance

Date:: 2011/05/27 13:38:18

Revision:: 1.18

Author:: J. Slaunwhite, Jeff Klukas

Definition at line 66 of file HLTMuonMatchAndPlot.h.

Constructor & Destructor Documentation

HLTMuonMatchAndPlot::HLTMuonMatchAndPlot	(	const edm::ParameterSet &	,
		std::string	,
		std::vector< std::string >
	)

Constructor.

Definition at line 42 of file HLTMuonMatchAndPlot.cc.

References binParams_, cutMinPt_, dbe_, fillMapFromPSet(), hltPath_, hltProcessName_, inputTags_, edm::InputTag::instance(), edm::InputTag::label(), moduleLabels_, cppFunctionSkipper::operator, plotCuts_, and triggerLevel_.

                                                                      :
  hltProcessName_(pset.getParameter<string>("hltProcessName")),
  destination_(pset.getUntrackedParameter<string>("destination")),
  requiredTriggers_(pset.getUntrackedParameter<vstring>("requiredTriggers")),
  targetParams_(pset.getParameterSet("targetParams")),
  probeParams_(pset.getParameterSet("probeParams")),
  hltPath_(hltPath),
  moduleLabels_(moduleLabels),
  hasTargetRecoCuts(targetParams_.exists("recoCuts")),
  hasProbeRecoCuts(probeParams_.exists("recoCuts")),
  targetMuonSelector_(targetParams_.getUntrackedParameter<string>("recoCuts", "")),
  targetZ0Cut_(targetParams_.getUntrackedParameter<double>("z0Cut",0.)),
  targetD0Cut_(targetParams_.getUntrackedParameter<double>("d0Cut",0.)),
  probeMuonSelector_(probeParams_.getUntrackedParameter<string>("recoCuts", "")),
  probeZ0Cut_(probeParams_.getUntrackedParameter<double>("z0Cut",0.)),                                                                                                                                                                                                        
  probeD0Cut_(probeParams_.getUntrackedParameter<double>("d0Cut",0.))
{

  // Create std::map<string, T> from ParameterSets. 
  fillMapFromPSet(inputTags_, pset, "inputTags");
  fillMapFromPSet(binParams_, pset, "binParams");
  fillMapFromPSet(plotCuts_, pset, "plotCuts");

  // Set HLT process name for TriggerResults and TriggerSummary.
  InputTag & resTag = inputTags_["triggerResults"];
  resTag = InputTag(resTag.label(), resTag.instance(), hltProcessName_);
  InputTag & sumTag = inputTags_["triggerSummary"];
  sumTag = InputTag(sumTag.label(), sumTag.instance(), hltProcessName_);

  // Prepare the DQMStore object.
  dbe_ = edm::Service<DQMStore>().operator->();
  dbe_->setVerbose(0);

  // Get the trigger level.
  triggerLevel_ = "L3";
  TPRegexp levelRegexp("L[1-3]");
  size_t nModules = moduleLabels_.size();
  TObjArray * levelArray = levelRegexp.MatchS(moduleLabels_[nModules - 1]);
  if (levelArray->GetEntriesFast() > 0) {
    triggerLevel_ = ((TObjString *)levelArray->At(0))->GetString();
  }
  delete levelArray;

  // Get the pT cut by parsing the name of the HLT path.
  cutMinPt_ = 3;
  TPRegexp ptRegexp("Mu([0-9]*)");
  TObjArray * objArray = ptRegexp.MatchS(hltPath_);
  if (objArray->GetEntriesFast() >= 2) {
    TObjString * ptCutString = (TObjString *)objArray->At(1);
    cutMinPt_ = atoi(ptCutString->GetString());
    cutMinPt_ = ceil(cutMinPt_ * plotCuts_["minPtFactor"]);
  }
  delete objArray;
}

Member Function Documentation

void HLTMuonMatchAndPlot::analyze	(	const edm::Event &	iEvent,
		const edm::EventSetup &	iSetup
	)

Definition at line 161 of file HLTMuonMatchAndPlot.cc.

References allMuons_cfi::allMuons, SiPixelRawToDigiRegional_cfi::beamSpot, reco::LeafCandidate::charge(), cutMinPt_, deltaR(), reco::TrackBase::dxy(), reco::TrackBase::dz(), EFFICIENCY_SUFFIXES, eta(), reco::LeafCandidate::eta(), trigger::TriggerObject::eta(), edm::Event::getByLabel(), hasProbeRecoCuts, hasTargetRecoCuts, hists_, HLT_5E33v4_cff::hltMuons, i, reco::Muon::innerTrack(), inputTags_, reco::Muon::isStandAloneMuon(), reco::Muon::isTrackerMuon(), edm::HandleBase::isValid(), j, gen::k, matchByDeltaR(), metsig::muon, reco::Muon::outerTrack(), reco::LeafCandidate::p4(), reco::LeafCandidate::phi(), phi, trigger::TriggerObject::phi(), plotCuts_, probeD0Cut_, probeMuonSelector_, probeZ0Cut_, reco::LeafCandidate::pt(), trigger::TriggerObject::pt(), requiredTriggers_, selectedMuons(), selectedTriggerObjects(), findQualityFiles::size, createPayload::suffix, targetD0Cut_, targetMuonSelector_, targetParams_, targetZ0Cut_, triggerLevel_, and patRefSel_triggerSelection_cff::triggerResults.

{

  // Get objects from the event.
  Handle<MuonCollection> allMuons;
  iEvent.getByLabel(inputTags_["recoMuon"], allMuons);
  Handle<BeamSpot> beamSpot;
  iEvent.getByLabel(inputTags_["beamSpot"], beamSpot);
  Handle<TriggerEvent> triggerSummary;
  iEvent.getByLabel(inputTags_["triggerSummary"], triggerSummary);
  Handle<TriggerResults> triggerResults;
  if(!triggerSummary.isValid()) 
  {
    edm::LogError("HLTMuonMatchAndPlot")<<"Missing triggerSummary with label " << inputTags_["triggerSummary"] <<std::endl;
    return;
  }
  iEvent.getByLabel(inputTags_["triggerResults"], triggerResults);
  if(!triggerResults.isValid()) 
  {
    edm::LogError("HLTMuonMatchAndPlot")<<"Missing triggerResults with label " << inputTags_["triggerResults"] <<std::endl;
    return;
  }
  // Throw out this event if it doesn't pass the required triggers.
  for (size_t i = 0; i < requiredTriggers_.size(); i++) {
    unsigned int triggerIndex = triggerResults->find(requiredTriggers_[i]);
    if (triggerIndex < triggerResults->size() ||
        !triggerResults->accept(triggerIndex))
      return;
  }

  // Select objects based on the configuration.
  MuonCollection targetMuons = selectedMuons(* allMuons, * beamSpot, hasTargetRecoCuts, targetMuonSelector_, targetD0Cut_, targetZ0Cut_);
  MuonCollection probeMuons = selectedMuons(* allMuons, * beamSpot, hasProbeRecoCuts, probeMuonSelector_, probeD0Cut_, probeZ0Cut_);
  TriggerObjectCollection allTriggerObjects = triggerSummary->getObjects();
  TriggerObjectCollection hltMuons = 
    selectedTriggerObjects(allTriggerObjects, * triggerSummary, targetParams_);

  // Fill plots for HLT muons.
  for (size_t i = 0; i < hltMuons.size(); i++) {
    hists_["hltPt"]->Fill(hltMuons[i].pt());
    hists_["hltEta"]->Fill(hltMuons[i].eta());
    hists_["hltPhi"]->Fill(hltMuons[i].phi());
  }

  // Find the best trigger object matches for the targetMuons.
  vector<size_t> matches = matchByDeltaR(targetMuons, hltMuons, 
                                         plotCuts_[triggerLevel_ + "DeltaR"]);

  // Fill plots for matched muons.
  for (size_t i = 0; i < targetMuons.size(); i++) {

    Muon & muon = targetMuons[i];

    // Fill plots which are not efficiencies.
    if (matches[i] < targetMuons.size()) {
      TriggerObject & hltMuon = hltMuons[matches[i]];
      double ptRes = (muon.pt() - hltMuon.pt()) / muon.pt();
      double etaRes = muon.eta() - hltMuon.eta();
      double phiRes = muon.phi() - hltMuon.phi();
      hists_["resolutionEta"]->Fill(etaRes);
      hists_["resolutionPhi"]->Fill(phiRes);
      hists_["resolutionPt"]->Fill(ptRes);
      hists_["deltaR"]->Fill(deltaR(muon, hltMuon));
    }

    // Fill numerators and denominators for efficiency plots.
    for (size_t j = 0; j < 2; j++) {

      string suffix = EFFICIENCY_SUFFIXES[j];

      // If no match was found, then the numerator plots don't get filled.
      if (suffix == "numer" && matches[i] >= targetMuons.size()) continue;

      if (muon.pt() > cutMinPt_) {
        hists_["efficiencyEta_" + suffix]->Fill(muon.eta());
        hists_["efficiencyPhiVsEta_" + suffix]->Fill(muon.eta(), muon.phi());
      }
      
      if (fabs(muon.eta()) < plotCuts_["maxEta"]) {
        hists_["efficiencyTurnOn_" + suffix]->Fill(muon.pt());
      }
      
      if (muon.pt() > cutMinPt_ && fabs(muon.eta()) < plotCuts_["maxEta"]) {
        const Track * track = 0;
        if (muon.isTrackerMuon()) track = & * muon.innerTrack();
        else if (muon.isStandAloneMuon()) track = & * muon.outerTrack();
        if (track) {
          double d0 = track->dxy(beamSpot->position());
          double z0 = track->dz(beamSpot->position());
          hists_["efficiencyPhi_" + suffix]->Fill(muon.phi());
          hists_["efficiencyD0_" + suffix]->Fill(d0);
          hists_["efficiencyZ0_" + suffix]->Fill(z0);
          hists_["efficiencyCharge_" + suffix]->Fill(muon.charge());
        }
      }
      
      // Fill plots for tag and probe
      for (size_t k = 0; k < probeMuons.size(); k++) {
        Muon & probe = targetMuons[k];
        if (muon.charge() != probe.charge()) {
          double mass = (muon.p4() + probe.p4()).M();
          hists_["massVsEtaZ_" + suffix]->Fill(mass, muon.eta());
          hists_["massVsEtaJpsi_" + suffix]->Fill(mass, muon.eta());
        }
      }

    } // End loop over denominator and numerator.

  } // End loop over targetMuons.

  // Plot fake rates (efficiency for HLT objects to not get matched to RECO).
  vector<size_t> hltMatches = matchByDeltaR(hltMuons, targetMuons,
                                            plotCuts_[triggerLevel_ + "DeltaR"]);
  for (size_t i = 0; i < hltMuons.size(); i++) {
    TriggerObject & hltMuon = hltMuons[i];
    bool isFake = hltMatches[i] > hltMuons.size();
    for (size_t j = 0; j < 2; j++) {
      string suffix = EFFICIENCY_SUFFIXES[j];
      // If match is found, then numerator plots should not get filled
      if (suffix == "numer" && ! isFake) continue;
      hists_["fakerateEta_" + suffix]->Fill(hltMuon.eta());
      hists_["fakeratePhi_" + suffix]->Fill(hltMuon.phi());
      hists_["fakerateTurnOn_" + suffix]->Fill(hltMuon.pt());
    } // End loop over numerator and denominator.
  } // End loop over hltMuons.
  

} // End analyze() method.

void HLTMuonMatchAndPlot::beginRun	(	const edm::Run &	iRun,
		const edm::EventSetup &	iSetup
	)

Definition at line 99 of file HLTMuonMatchAndPlot.cc.

References cmsMakeMELists::baseDir, book1D(), book2D(), dbe_, destination_, EFFICIENCY_SUFFIXES, edm::ParameterSet::exists(), hltPath_, i, probeParams_, DQMStore::setCurrentFolder(), and createPayload::suffix.

{

  TPRegexp suffixPtCut("Mu[0-9]+$");

  string baseDir = destination_;
  if (baseDir[baseDir.size() - 1] != '/') baseDir += '/';
  string pathSansSuffix = hltPath_;
  if (hltPath_.rfind("_v") < hltPath_.length())
    pathSansSuffix = hltPath_.substr(0, hltPath_.rfind("_v"));
  dbe_->setCurrentFolder(baseDir + pathSansSuffix);

  // Form is book1D(name, binningType, title) where 'binningType' is used 
  // to fetch the bin settings from binParams_.
  book1D("deltaR", "deltaR", ";#Deltar(reco, HLT);");
  book1D("hltPt", "pt", ";p_{T} of HLT object");
  book1D("hltEta", "eta", ";#eta of HLT object");
  book1D("hltPhi", "phi", ";#phi of HLT object");
  book1D("resolutionEta", "resolutionEta", ";#eta^{reco}-#eta^{HLT};");
  book1D("resolutionPhi", "resolutionPhi", ";#phi^{reco}-#phi^{HLT};");
  book1D("resolutionPt", "resolutionRel", 
         ";(p_{T}^{reco}-p_{T}^{HLT})/|p_{T}^{reco}|;");

  for (size_t i = 0; i < 2; i++) {

    string suffix = EFFICIENCY_SUFFIXES[i];

    book1D("efficiencyEta_" + suffix, "eta", ";#eta;");
    book1D("efficiencyPhi_" + suffix, "phi", ";#phi;");
    book1D("efficiencyTurnOn_" + suffix, "pt", ";p_{T};");
    book1D("efficiencyD0_" + suffix, "d0", ";d0;");
    book1D("efficiencyZ0_" + suffix, "z0", ";z0;");
    book1D("efficiencyCharge_" + suffix, "charge", ";charge;");
    book2D("efficiencyPhiVsEta_" + suffix, "etaCoarse", "phiCoarse", 
           ";#eta;#phi");

    book1D("fakerateEta_" + suffix, "eta", ";#eta;");
    book1D("fakeratePhi_" + suffix, "phi", ";#phi;");
    book1D("fakerateTurnOn_" + suffix, "pt", ";p_{T};");

    // Charge Flip?
 
    // Book histograms for tag and probe
    if (probeParams_.exists("recoCuts")) {
      book2D("massVsEtaZ_" + suffix, "zMass", "etaCoarse", ";m_{#mu#mu};#eta");
      book2D("massVsEtaJpsi_" + suffix, "jpsiMass", "etaCoarse", ";m_{#mu#mu};#eta");
    }

  }
  
}

void HLTMuonMatchAndPlot::book1D	(	std::string	,
		std::string	,
		std::string
	)		`[private]`

Referenced by beginRun().

void HLTMuonMatchAndPlot::book2D	(	std::string	,
		std::string	,
		std::string	,
		std::string
	)		`[private]`

Referenced by beginRun().

void HLTMuonMatchAndPlot::endRun	(	const edm::Run &	iRun,
		const edm::EventSetup &	iSetup
	)

Definition at line 154 of file HLTMuonMatchAndPlot.cc.

{
}

void HLTMuonMatchAndPlot::fillEdges	(	size_t &	nBins,
		float *&	edges,
		std::vector< double >	binning
	)

Definition at line 296 of file HLTMuonMatchAndPlot.cc.

References i, and min.

Referenced by HcalSubdetDigiMonitor::book1D(), and HcalSubdetDigiMonitor::book2D().

                                                       {

  if (binning.size() < 3) {
    LogWarning("HLTMuonVal") << "Invalid binning parameters!"; 
    return;
  }

  // Fixed-width binning.
  if (binning.size() == 3) {
    nBins = binning[0];
    edges = new float[nBins + 1];
    const double min = binning[1];
    const double binwidth = (binning[2] - binning[1]) / nBins;
    for (size_t i = 0; i <= nBins; i++) edges[i] = min + (binwidth * i);
  } 

  // Variable-width binning.
  else {
    nBins = binning.size() - 1;
    edges = new float[nBins + 1];
    for (size_t i = 0; i <= nBins; i++) edges[i] = binning[i];
  }

}

template<class T >

void HLTMuonMatchAndPlot::fillMapFromPSet	(	std::map< std::string, T > &	,
		edm::ParameterSet	,
		std::string
	)

Referenced by HLTMuonMatchAndPlot().

template<class T >

void HLTMuonMatchAndPlot::fillMapFromPSet	(	map< string, T > &	m,
		ParameterSet	pset,
		string	target
	)

Definition at line 329 of file HLTMuonMatchAndPlot.cc.

References edm::ParameterSet::existsAs(), edm::ParameterSet::getParameter(), edm::ParameterSet::getParameterNames(), edm::ParameterSet::getParameterSet(), edm::ParameterSet::getUntrackedParameter(), edm::ParameterSet::getUntrackedParameterSet(), and h::names.

                                                                       {

  // Get the ParameterSet with name 'target' from 'pset'
  ParameterSet targetPset;
  if (pset.existsAs<ParameterSet>(target, true))        // target is tracked
    targetPset = pset.getParameterSet(target);
  else if (pset.existsAs<ParameterSet>(target, false))  // target is untracked
    targetPset = pset.getUntrackedParameterSet(target);
  
  // Get the parameter names from targetPset
  vector<string> names = targetPset.getParameterNames();
  vector<string>::const_iterator iter;
  
  for (iter = names.begin(); iter != names.end(); ++iter) {
    if (targetPset.existsAs<T>(* iter, true))           // target is tracked
      m[* iter] = targetPset.getParameter<T>(* iter);
    else if (targetPset.existsAs<T>(* iter, false))     // target is untracked
      m[* iter] = targetPset.getUntrackedParameter<T>(* iter);
  }

}

template<class T1 , class T2 >

vector<size_t> HLTMuonMatchAndPlot::matchByDeltaR	(	const vector< T1 > &	collection1,
		const vector< T2 > &	collection2,
		const double	maxDeltaR
	)

Definition at line 357 of file HLTMuonMatchAndPlot.cc.

References deltaR(), i, j, gen::k, NOMATCH, and query::result.

                                                           {

  const size_t n1 = collection1.size();
  const size_t n2 = collection2.size();

  vector<size_t> result(n1, -1);
  vector<vector<double> > deltaRMatrix(n1, vector<double>(n2, NOMATCH));

  for (size_t i = 0; i < n1; i++)
    for (size_t j = 0; j < n2; j++) {
      deltaRMatrix[i][j] = deltaR(collection1[i], collection2[j]);
    }

  // Run through the matrix n1 times to make sure we've found all matches.
  for (size_t k = 0; k < n1; k++) {
    size_t i_min = -1;
    size_t j_min = -1;
    double minDeltaR = maxDeltaR;
    // find the smallest deltaR
    for (size_t i = 0; i < n1; i++)
      for (size_t j = 0; j < n2; j++)
        if (deltaRMatrix[i][j] < minDeltaR) {
          i_min = i;
          j_min = j;
          minDeltaR = deltaRMatrix[i][j];
        }
    // If a match has been made, save it and make those candidates unavailable.
    if (minDeltaR < maxDeltaR) {
      result[i_min] = j_min;
      deltaRMatrix[i_min] = vector<double>(n2, NOMATCH);
      for (size_t i = 0; i < n1; i++)
        deltaRMatrix[i][j_min] = NOMATCH;
    }
  }

  return result;

}

template<class T1 , class T2 >

std::vector<size_t> HLTMuonMatchAndPlot::matchByDeltaR	(	const std::vector< T1 > &	,
		const std::vector< T2 > &	,
		const double	maxDeltaR = `NOMATCH`
	)

Referenced by analyze().

MuonCollection HLTMuonMatchAndPlot::selectedMuons	(	const reco::MuonCollection &	allMuons,
		const reco::BeamSpot &	beamSpot,
		bool	hasRecoCuts,
		const StringCutObjectSelector< reco::Muon > &	selector,
		double	d0Cut,
		double	z0Cut
	)		`[private]`

Definition at line 401 of file HLTMuonMatchAndPlot.cc.

References reco::TrackBase::dxy(), reco::TrackBase::dz(), and reco::BeamSpot::position().

Referenced by analyze().

{
  // If there is no selector (recoCuts does not exists), return an empty collection. 
  if (!hasRecoCuts)
    return MuonCollection();

  MuonCollection reducedMuons(allMuons);
  MuonCollection::iterator iter = reducedMuons.begin();
  while (iter != reducedMuons.end()) {
    const Track * track = 0;
    if (iter->isTrackerMuon()) track = & * iter->innerTrack();
    else if (iter->isStandAloneMuon()) track = & * iter->outerTrack();
    if (track && selector(* iter) &&
        fabs(track->dxy(beamSpot.position())) < d0Cut &&
        fabs(track->dz(beamSpot.position())) < z0Cut)
      ++iter;
    else reducedMuons.erase(iter);
  }

  return reducedMuons;

}

TriggerObjectCollection HLTMuonMatchAndPlot::selectedTriggerObjects	(	const trigger::TriggerObjectCollection &	triggerObjects,
		const trigger::TriggerEvent &	triggerSummary,
		const edm::ParameterSet &	pset
	)		`[private]`

Definition at line 431 of file HLTMuonMatchAndPlot.cc.

References edm::ParameterSet::exists(), trigger::TriggerEvent::filterIndex(), trigger::TriggerEvent::filterKeys(), edm::ParameterSet::getUntrackedParameter(), hltProcessName_, j, relativeConstraints::keys, moduleLabels_, and trigger::TriggerEvent::sizeFilters().

Referenced by analyze().

{

  // If pset is empty, return an empty collection.
  if (!pset.exists("hltCuts"))
    return TriggerObjectCollection();

  StringCutObjectSelector<TriggerObject> selector
    (pset.getUntrackedParameter<string>("hltCuts"));

  InputTag filterTag(moduleLabels_[moduleLabels_.size() - 1], "", 
                     hltProcessName_);
  size_t filterIndex = triggerSummary.filterIndex(filterTag);

  TriggerObjectCollection selectedObjects;

  if (filterIndex < triggerSummary.sizeFilters()) {
    const Keys &keys = triggerSummary.filterKeys(filterIndex);
    for (size_t j = 0; j < keys.size(); j++ ){
      TriggerObject foundObject = triggerObjects[keys[j]];
      if (selector(foundObject))
        selectedObjects.push_back(foundObject);
    }
  }

  return selectedObjects;

}