![]() |
![]() |
#include "RecoLocalCalo/HcalRecAlgos/interface/HcalSimpleRecAlgo.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"
#include "CalibCalorimetry/HcalAlgos/interface/HcalTimeSlew.h"
#include <algorithm>
#include <math.h>
#include <iostream>
Go to the source code of this file.
Namespaces | |
namespace | HcalSimpleRecAlgoImpl |
Functions | |
static float | eCorr (int ieta, int iphi, double ampl) |
Ugly hack to apply energy corrections to some HB- cells. | |
static float | leakCorr (double energy) |
Leak correction. | |
template<class Digi , class RecHit > | |
RecHit | HcalSimpleRecAlgoImpl::reco (const Digi &digi, const HcalCoder &coder, const HcalCalibrations &calibs, int ifirst, int n, bool slewCorrect, const HcalPulseContainmentCorrection *corr, HcalTimeSlew::BiasSetting slewFlavor, bool forData, bool useLeak) |
static float | timeshift_ns_hbheho (float wpksamp) |
static float | timeshift_ns_hf (float wpksamp) |
Same as above, but for the HF PMTs. | |
Variables | |
static const float | actual_ns_hbheho [num_bins_hbheho] |
static const float | actual_ns_hf [num_bins_hf] |
static double | MaximumFractionalError = 0.0005 |
static const int | num_bins_hbheho = 61 |
static const int | num_bins_hf = 101 |
static const float | wpksamp0_hbheho = 0.5 |
static const float | wpksamp0_hf = 0.5 |
float eCorr | ( | int | ieta, |
int | iphi, | ||
double | ampl | ||
) | [static] |
Ugly hack to apply energy corrections to some HB- cells.
Definition at line 212 of file HcalSimpleRecAlgo.cc.
References corr, relval_parameters_module::energy, funct::exp(), and slope.
Referenced by HcalSimpleRecAlgoImpl::reco().
{ // return energy correction factor for HBM channels // iphi=6 ieta=(-1,-15) and iphi=32 ieta=(-1,-7) // I.Vodopianov 28 Feb. 2011 static const float low32[7] = {0.741,0.721,0.730,0.698,0.708,0.751,0.861}; static const float high32[7] = {0.973,0.925,0.900,0.897,0.950,0.935,1}; static const float low6[15] = {0.635,0.623,0.670,0.633,0.644,0.648,0.600, 0.570,0.595,0.554,0.505,0.513,0.515,0.561,0.579}; static const float high6[15] = {0.875,0.937,0.942,0.900,0.922,0.925,0.901, 0.850,0.852,0.818,0.731,0.717,0.782,0.853,0.778}; double slope, mid, en; double corr = 1.0; if (!(iphi==6 && ieta<0 && ieta>-16) && !(iphi==32 && ieta<0 && ieta>-8)) return corr; int jeta = -ieta-1; double xeta = (double) ieta; if (energy > 0.) en=energy; else en = 0.; if (iphi == 32) { slope = 0.2272; mid = 17.14 + 0.7147*xeta; if (en > 100.) corr = high32[jeta]; else corr = low32[jeta]+(high32[jeta]-low32[jeta])/(1.0+exp(-(en-mid)*slope)); } else if (iphi == 6) { slope = 0.1956; mid = 15.96 + 0.3075*xeta; if (en > 100.0) corr = high6[jeta]; else corr = low6[jeta]+(high6[jeta]-low6[jeta])/(1.0+exp(-(en-mid)*slope)); } // std::cout << "HBHE cell: ieta, iphi = " << ieta << " " << iphi // << " -> energy = " << en << " corr = " << corr << std::endl; return corr; }
float leakCorr | ( | double | energy | ) | [static] |
Leak correction.
Definition at line 256 of file HcalSimpleRecAlgo.cc.
References corr.
Referenced by HcalSimpleRecAlgoImpl::reco().
float timeshift_ns_hbheho | ( | float | wpksamp | ) | [static] |
Timeshift correction for HPDs based on the position of the peak ADC measurement. Allows for an accurate determination of the relative phase of the pulse shape from the HPD. Calculated based on a weighted sum of the -1,0,+1 samples relative to the peak as follows: wpksamp = (0*sample[0] + 1*sample[1] + 2*sample[2]) / (sample[0] + sample[1] + sample[2]) where sample[1] is the maximum ADC sample value.
Definition at line 331 of file HcalSimpleRecAlgo.cc.
References actual_ns_hbheho, getHLTprescales::index, num_bins_hbheho, and wpksamp0_hbheho.
Referenced by HcalSimpleRecAlgoImpl::reco().
{ float flx = (num_bins_hbheho-1)*(wpksamp - wpksamp0_hbheho); int index = (int)flx; float yval; if (index < 0) return actual_ns_hbheho[0]; else if (index >= num_bins_hbheho-1) return actual_ns_hbheho[num_bins_hbheho-1]; // else interpolate: float y1 = actual_ns_hbheho[index]; float y2 = actual_ns_hbheho[index+1]; yval = y1 + (y2-y1)*(flx-(float)index); return yval; }
float timeshift_ns_hf | ( | float | wpksamp | ) | [static] |
Same as above, but for the HF PMTs.
Definition at line 455 of file HcalSimpleRecAlgo.cc.
References actual_ns_hf, getHLTprescales::index, num_bins_hf, and wpksamp0_hf.
Referenced by HcalSimpleRecAlgo::reconstruct().
{ float flx = (num_bins_hf-1)*(wpksamp-wpksamp0_hf); int index = (int)flx; float yval; if (index < 0) return actual_ns_hf[0]; else if (index >= num_bins_hf-1) return actual_ns_hf[num_bins_hf-1]; // else interpolate: float y1 = actual_ns_hf[index]; float y2 = actual_ns_hf[index+1]; // float delta_x = 1/(float)num_bins_hf; // yval = y1 + (y2-y1)*(flx-(float)index)/delta_x; yval = y1 + (y2-y1)*(flx-(float)index); return yval; }
const float actual_ns_hbheho[num_bins_hbheho] [static] |
Definition at line 267 of file HcalSimpleRecAlgo.cc.
Referenced by timeshift_ns_hbheho().
const float actual_ns_hf[num_bins_hf] [static] |
Definition at line 351 of file HcalSimpleRecAlgo.cc.
Referenced by timeshift_ns_hf().
double MaximumFractionalError = 0.0005 [static] |
Definition at line 9 of file HcalSimpleRecAlgo.cc.
Referenced by HcalSimpleRecAlgo::initPulseCorr().
const int num_bins_hbheho = 61 [static] |
Definition at line 265 of file HcalSimpleRecAlgo.cc.
Referenced by timeshift_ns_hbheho().
const int num_bins_hf = 101 [static] |
Definition at line 348 of file HcalSimpleRecAlgo.cc.
Referenced by timeshift_ns_hf().
const float wpksamp0_hbheho = 0.5 [static] |
Definition at line 264 of file HcalSimpleRecAlgo.cc.
Referenced by timeshift_ns_hbheho().
const float wpksamp0_hf = 0.5 [static] |
Definition at line 349 of file HcalSimpleRecAlgo.cc.
Referenced by timeshift_ns_hf().