|
|
|
#include <SiPixelTemplate.h>
Public Member Functions | |
| float | chi2xavg (int i) |
| averaage x chi^2 in 4 charge bins | |
| float | chi2xavgone () |
| //!< average x chi^2 for 1 pixel clusters | |
| float | chi2xmin (int i) |
| minimum y chi^2 in 4 charge bins | |
| float | chi2xminone () |
| //!< minimum of x chi^2 for 1 pixel clusters | |
| float | chi2yavg (int i) |
| average y chi^2 in 4 charge bins | |
| float | chi2yavgone () |
| //!< average y chi^2 for 1 pixel clusters | |
| float | chi2ymin (int i) |
| minimum y chi^2 in 4 charge bins | |
| float | chi2yminone () |
| //!< minimum of y chi^2 for 1 pixel clusters | |
| float | clslenx () |
| x-size of smaller interpolated template in pixels | |
| float | clsleny () |
| y-size of smaller interpolated template in pixels | |
| float | dxone () |
| mean offset/correction for one pixel x-clusters | |
| float | dxtwo () |
| mean offset/correction for one double-pixel x-clusters | |
| float | dyone () |
| mean offset/correction for one pixel y-clusters | |
| float | dytwo () |
| mean offset/correction for one double-pixel y-clusters | |
| bool | interpolate (int id, float cotalpha, float cotbeta) |
| bool | interpolate (int id, float cotalpha, float cotbeta, float locBz) |
| float | kappavav () |
| kappa parameter for Vavilov distribution | |
| float | lorxwidth () |
| signed lorentz x-width (microns) | |
| float | lorywidth () |
| signed lorentz y-width (microns) | |
| float | mpvvav () |
| most probable charge in Vavilov distribution (not actually for larger kappa) | |
| float | pixmax () |
| maximum pixel charge | |
| bool | pushfile (int filenum) |
| bool | pushfile (const SiPixelTemplateDBObject &dbobject) |
| float | qavg () |
| average cluster charge for this set of track angles | |
| int | qbin (int id, float cotbeta, float qclus) |
| int | qbin (int id, float cotalpha, float cotbeta, float locBz, float qclus, float &pixmx, float &sigmay, float &deltay, float &sigmax, float &deltax, float &sy1, float &dy1, float &sy2, float &dy2, float &sx1, float &dx1, float &sx2, float &dx2) |
| int | qbin (int id, float cotalpha, float cotbeta, float locBz, float qclus, float &pixmx, float &sigmay, float &deltay, float &sigmax, float &deltax, float &sy1, float &dy1, float &sy2, float &dy2, float &sx1, float &dx1, float &sx2, float &dx2, float &lorywidth, float &lorxwidth) |
| void | qbin_dist (int id, float cotalpha, float cotbeta, float qbin_frac[4], float &ny1_frac, float &ny2_frac, float &nx1_frac, float &nx2_frac) |
| float | qmin () |
| minimum cluster charge for valid hit (keeps 99.9% of simulated hits) | |
| float | qmin (int i) |
| minimum cluster charge for valid hit (keeps 99.9% or 99.8% of simulated hits) | |
| float | qscale () |
| charge scaling factor | |
| float | s50 () |
| 1/2 of the pixel threshold signal in electrons | |
| float | sigmavav () |
| "sigma" scale fctor for Vavilov distribution | |
| bool | simpletemplate2D (float xhitp, float yhitp, std::vector< bool > &ydouble, std::vector< bool > &xdouble, float template2d[BXM2][BYM2]) |
| Make simple 2-D templates from track angles set in interpolate and hit position. | |
| SiPixelTemplate () | |
| Default constructor. | |
| float | sxmax () |
| average pixel signal for x-projection of cluster | |
| float | sxone () |
| rms for one pixel x-clusters | |
| float | sxtwo () |
| rms for one double-pixel x-clusters | |
| float | symax () |
| average pixel signal for y-projection of cluster | |
| float | syone () |
| rms for one pixel y-clusters | |
| float | sytwo () |
| rms for one double-pixel y-clusters | |
| void | temperrors (int id, float cotalpha, float cotbeta, int qBin, float &sigmay, float &sigmax, float &sy1, float &sy2, float &sx1, float &sx2) |
| void | vavilov_pars (double &mpv, double &sigma, double &kappa) |
| float | xavg (int i) |
| average x-bias of reconstruction binned in 4 charge bins | |
| float | xavgc2m (int i) |
| 1st pass chi2 min search: average x-bias of reconstruction binned in 4 charge bins | |
| float | xflcorr (int binq, float qflx) |
| float | xgsig (int i) |
| average sigma_x from Gaussian fit binned in 4 charge bins | |
| float | xgsigc2m (int i) |
| 1st pass chi2 min search: average sigma_x from Gaussian fit binned in 4 charge bins | |
| float | xgx0 (int i) |
| average x0 from Gaussian fit binned in 4 charge bins | |
| float | xgx0c2m (int i) |
| 1st pass chi2 min search: average x0 from Gaussian fit binned in 4 charge bins | |
| float | xrms (int i) |
| average x-rms of reconstruction binned in 4 charge bins | |
| float | xrmsc2m (int i) |
| 1st pass chi2 min search: average x-rms of reconstruction binned in 4 charge bins | |
| void | xsigma2 (int fxpix, int lxpix, float sxthr, float xsum[BXSIZE], float xsig2[BXSIZE]) |
| float | xsize () |
| pixel x-size (microns) | |
| void | xtemp (int fxbin, int lxbin, float xtemplate[41][BXSIZE]) |
| void | xtemp3d (int nxpix, array_3d &xtemplate) |
| float | xxratio () |
| fractional distance in x between cotalpha templates | |
| float | yavg (int i) |
| average y-bias of reconstruction binned in 4 charge bins | |
| float | yavgc2m (int i) |
| 1st pass chi2 min search: average y-bias of reconstruction binned in 4 charge bins | |
| float | yflcorr (int binq, float qfly) |
| float | ygsig (int i) |
| average sigma_y from Gaussian fit binned in 4 charge bins | |
| float | ygsigc2m (int i) |
| 1st pass chi2 min search: average sigma_y from Gaussian fit binned in 4 charge bins | |
| float | ygx0 (int i) |
| average y0 from Gaussian fit binned in 4 charge bins | |
| float | ygx0c2m (int i) |
| 1st pass chi2 min search: average y0 from Gaussian fit binned in 4 charge bins | |
| float | yratio () |
| fractional distance in y between cotbeta templates | |
| float | yrms (int i) |
| average y-rms of reconstruction binned in 4 charge bins | |
| float | yrmsc2m (int i) |
| 1st pass chi2 min search: average y-rms of reconstruction binned in 4 charge bins | |
| void | ysigma2 (int fypix, int lypix, float sythr, float ysum[BYSIZE], float ysig2[BYSIZE]) |
| void | ysigma2 (float qpixel, int index, float &ysig2) |
| float | ysize () |
| pixel y-size (microns) | |
| void | ytemp (int fybin, int lybin, float ytemplate[41][BYSIZE]) |
| void | ytemp3d (int nypix, array_3d &ytemplate) |
| float | yxratio () |
| fractional distance in y between cotalpha templates slices | |
| float | zsize () |
| pixel z-size or thickness (microns) | |
Private Attributes | |
| float | abs_cotb |
| absolute value of cot beta | |
| float | cota_current |
| current cot alpha | |
| float | cotb_current |
| current cot beta | |
| int | id_current |
| current id | |
| int | index_id |
| current index | |
| float | pchi2xavg [4] |
| average x chi^2 in 4 charge bins | |
| float | pchi2xavgone |
| average x chi^2 for 1 pixel clusters | |
| float | pchi2xmin [4] |
| minimum of x chi^2 in 4 charge bins | |
| float | pchi2xminone |
| minimum of x chi^2 for 1 pixel clusters | |
| float | pchi2yavg [4] |
| average y chi^2 in 4 charge bins | |
| float | pchi2yavgone |
| average y chi^2 for 1 pixel clusters | |
| float | pchi2ymin [4] |
| minimum of y chi^2 in 4 charge bins | |
| float | pchi2yminone |
| minimum of y chi^2 for 1 pixel clusters | |
| float | pclslenx |
| x-cluster length of smaller interpolated template in pixels | |
| float | pclsleny |
| y-cluster length of smaller interpolated template in pixels | |
| float | pdxone |
| mean offset/correction for one pixel x-clusters | |
| float | pdxtwo |
| mean offset/correction for one double-pixel x-clusters | |
| float | pdyone |
| mean offset/correction for one pixel y-clusters | |
| float | pdytwo |
| mean offset/correction for one double-pixel y-clusters | |
| float | pkappavav |
| kappa parameter for Vavilov distribution | |
| float | plorxwidth |
| Lorentz x-width. | |
| float | plorywidth |
| Lorentz y-width (sign corrected for fpix frame) | |
| float | pmpvvav |
| most probable charge in Vavilov distribution (not actually for larger kappa) | |
| float | ppixmax |
| maximum pixel charge | |
| float | pqavg |
| average cluster charge for this set of track angles | |
| float | pqavg_avg |
| average of cluster charge less than qavg | |
| float | pqmin |
| minimum cluster charge for valid hit (keeps 99.9% of simulated hits) | |
| float | pqmin2 |
| tighter minimum cluster charge for valid hit (keeps 99.8% of simulated hits) | |
| float | pqscale |
| charge scaling factor | |
| float | ps50 |
| 1/2 of the pixel threshold signal in adc units | |
| float | psigmavav |
| "sigma" scale fctor for Vavilov distribution | |
| float | psxmax |
| average pixel signal for x-projection of cluster | |
| float | psxone |
| rms for one pixel x-clusters | |
| float | psxparmax |
| maximum pixel signal for parameterization of x uncertainties | |
| float | psxtwo |
| rms for one double-pixel x-clusters | |
| float | psymax |
| average pixel signal for y-projection of cluster | |
| float | psyone |
| rms for one pixel y-clusters | |
| float | psyparmax |
| maximum pixel signal for parameterization of y uncertainties | |
| float | psytwo |
| rms for one double-pixel y-clusters | |
| float | pxavg [4] |
| average x-bias of reconstruction binned in 4 charge bins | |
| float | pxavgc2m [4] |
| 1st pass chi2 min search: average x-bias of reconstruction binned in 4 charge bins | |
| float | pxflparhh [4][6] |
| Aqfl-parameterized x-correction in 4 charge bins for larger cotbeta, cotalpha. | |
| float | pxflparhl [4][6] |
| Aqfl-parameterized x-correction in 4 charge bins for larger cotbeta, smaller cotalpha. | |
| float | pxflparlh [4][6] |
| Aqfl-parameterized x-correction in 4 charge bins for smaller cotbeta, larger cotalpha. | |
| float | pxflparll [4][6] |
| Aqfl-parameterized x-correction in 4 charge bins for smaller cotbeta, cotalpha. | |
| float | pxgsig [4] |
| sigma from Gaussian fit binned in 4 charge bins | |
| float | pxgsigc2m [4] |
| 1st pass chi2 min search: sigma from Gaussian fit binned in 4 charge bins | |
| float | pxgx0 [4] |
| average x0 from Gaussian fit binned in 4 charge bins | |
| float | pxgx0c2m [4] |
| 1st pass chi2 min search: average x0 from Gaussian fit binned in 4 charge bins | |
| float | pxpar0 [2][5] |
| projected x-pixel uncertainty parameterization for central cotalpha | |
| float | pxparh [2][5] |
| projected x-pixel uncertainty parameterization for larger cotalpha | |
| float | pxparhy0 [2][5] |
| projected x-pixel uncertainty parameterization for larger cotbeta (central alpha) | |
| float | pxparl [2][5] |
| projected x-pixel uncertainty parameterization for smaller cotalpha | |
| float | pxparly0 [2][5] |
| projected x-pixel uncertainty parameterization for smaller cotbeta (central alpha) | |
| float | pxrms [4] |
| average x-rms of reconstruction binned in 4 charge bins | |
| float | pxrmsc2m [4] |
| 1st pass chi2 min search: average x-rms of reconstruction binned in 4 charge bins | |
| float | pxsize |
| Pixel x-size. | |
| float | pxtemp [9][BXSIZE] |
| templates for x-reconstruction (binned over 5 central pixels) | |
| float | pxxratio |
| fractional distance in x between cotalpha templates | |
| float | pyavg [4] |
| average y-bias of reconstruction binned in 4 charge bins | |
| float | pyavgc2m [4] |
| 1st pass chi2 min search: average y-bias of reconstruction binned in 4 charge bins | |
| float | pyflparh [4][6] |
| Aqfl-parameterized y-correction in 4 charge bins for larger cotbeta. | |
| float | pyflparl [4][6] |
| Aqfl-parameterized y-correction in 4 charge bins for smaller cotbeta. | |
| float | pygsig [4] |
| average sigma_y from Gaussian fit binned in 4 charge bins | |
| float | pygsigc2m [4] |
| 1st pass chi2 min search: average sigma_y from Gaussian fit binned in 4 charge bins | |
| float | pygx0 [4] |
| average y0 from Gaussian fit binned in 4 charge bins | |
| float | pygx0c2m [4] |
| 1st pass chi2 min search: average y0 from Gaussian fit binned in 4 charge bins | |
| float | pyparh [2][5] |
| projected y-pixel uncertainty parameterization for larger cotbeta | |
| float | pyparl [2][5] |
| projected y-pixel uncertainty parameterization for smaller cotbeta | |
| float | pyratio |
| fractional distance in y between cotbeta templates | |
| float | pyrms [4] |
| average y-rms of reconstruction binned in 4 charge bins | |
| float | pyrmsc2m [4] |
| 1st pass chi2 min search: average y-rms of reconstruction binned in 4 charge bins | |
| float | pysize |
| Pixel y-size. | |
| float | pytemp [9][BYSIZE] |
| templates for y-reconstruction (binned over 5 central pixels) | |
| float | pyxratio |
| fractional distance in y between x-slices of cotalpha templates | |
| float | pzsize |
| Pixel z-size (thickness) | |
| bool | success |
| true if cotalpha, cotbeta are inside of the acceptance (dynamically loaded) | |
| std::vector< SiPixelTemplateStore > | thePixelTemp |
A template management class. SiPixelTemplate contains thePixelTemp (a std::vector of SiPixelTemplateStore, each of which is a collection of many SiPixelTemplateEntries). Each SiPixelTemplateStore corresponds to a given detector condition, and is valid for a range of runs. We allow more than one Store since the may change over time.
This class reads templates from files via pushfile() method.
The main functionality of SiPixelTemplate is interpolate(), which produces a template on the fly, given a specific track's alpha and beta. The results are kept in data members and accessed via inline getters.
The resulting template is then used by PixelTempReco2D() (a global function) which get the reference for SiPixelTemplate & templ and uses the current template to reconstruct the SiPixelRecHit.
Definition at line 207 of file SiPixelTemplate.h.
| SiPixelTemplate::SiPixelTemplate | ( | ) | [inline] |
Default constructor.
Definition at line 209 of file SiPixelTemplate.h.
References cota_current, cotb_current, id_current, and index_id.
| float SiPixelTemplate::chi2xavg | ( | int | i | ) | [inline] |
averaage x chi^2 in 4 charge bins
Definition at line 368 of file SiPixelTemplate.h.
References Exception, i, and pchi2xavg.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::chi2xavgone | ( | ) | [inline] |
//!< average x chi^2 for 1 pixel clusters
Definition at line 440 of file SiPixelTemplate.h.
References pchi2xavgone.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::chi2xmin | ( | int | i | ) | [inline] |
minimum y chi^2 in 4 charge bins
Definition at line 375 of file SiPixelTemplate.h.
References Exception, i, and pchi2xmin.
Referenced by SiPixelTemplateReco::PixelTempReco2D().
| float SiPixelTemplate::chi2xminone | ( | ) | [inline] |
//!< minimum of x chi^2 for 1 pixel clusters
Definition at line 441 of file SiPixelTemplate.h.
References pchi2xminone.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::chi2yavg | ( | int | i | ) | [inline] |
average y chi^2 in 4 charge bins
Definition at line 354 of file SiPixelTemplate.h.
References Exception, i, and pchi2yavg.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::chi2yavgone | ( | ) | [inline] |
//!< average y chi^2 for 1 pixel clusters
Definition at line 438 of file SiPixelTemplate.h.
References pchi2yavgone.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::chi2ymin | ( | int | i | ) | [inline] |
minimum y chi^2 in 4 charge bins
Definition at line 361 of file SiPixelTemplate.h.
References Exception, i, and pchi2ymin.
Referenced by SiPixelTemplateReco::PixelTempReco2D().
| float SiPixelTemplate::chi2yminone | ( | ) | [inline] |
//!< minimum of y chi^2 for 1 pixel clusters
Definition at line 439 of file SiPixelTemplate.h.
References pchi2yminone.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::clslenx | ( | ) | [inline] |
x-size of smaller interpolated template in pixels
Definition at line 294 of file SiPixelTemplate.h.
References pclslenx.
| float SiPixelTemplate::clsleny | ( | ) | [inline] |
y-size of smaller interpolated template in pixels
Definition at line 293 of file SiPixelTemplate.h.
References pclsleny.
| float SiPixelTemplate::dxone | ( | ) | [inline] |
mean offset/correction for one pixel x-clusters
Definition at line 281 of file SiPixelTemplate.h.
References pdxone.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::dxtwo | ( | ) | [inline] |
mean offset/correction for one double-pixel x-clusters
Definition at line 283 of file SiPixelTemplate.h.
References pdxtwo.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::dyone | ( | ) | [inline] |
mean offset/correction for one pixel y-clusters
Definition at line 276 of file SiPixelTemplate.h.
References pdyone.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::dytwo | ( | ) | [inline] |
mean offset/correction for one double-pixel y-clusters
Definition at line 278 of file SiPixelTemplate.h.
References pdytwo.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| bool SiPixelTemplate::interpolate | ( | int | id, |
| float | cotalpha, | ||
| float | cotbeta | ||
| ) |
Interpolate input alpha and beta angles to produce a working template for each individual hit.
| id | - (input) index of the template to use |
| cotalpha | - (input) the cotangent of the alpha track angle (see CMS IN 2004/014) |
| cotbeta | - (input) the cotangent of the beta track angle (see CMS IN 2004/014) |
Definition at line 1250 of file SiPixelTemplate.cc.
References interpolate().
{
// Interpolate for a new set of track angles
// Local variables
float locBz;
locBz = -1.;
if(cotbeta < 0.) {locBz = -locBz;}
return SiPixelTemplate::interpolate(id, cotalpha, cotbeta, locBz);
}
| bool SiPixelTemplate::interpolate | ( | int | id, |
| float | cotalpha, | ||
| float | cotbeta, | ||
| float | locBz | ||
| ) |
Interpolate input alpha and beta angles to produce a working template for each individual hit.
| id | - (input) index of the template to use |
| cotalpha | - (input) the cotangent of the alpha track angle (see CMS IN 2004/014) |
| cotbeta | - (input) the cotangent of the beta track angle (see CMS IN 2004/014) |
| locBz | - (input) the sign of this quantity is used to determine whether to flip cot(beta)<0 quantities from cot(beta)>0 (FPix only) for FPix IP-related tracks, locBz < 0 for cot(beta) > 0 and locBz > 0 for cot(beta) < 0 |
Definition at line 844 of file SiPixelTemplate.cc.
References abs, BXM1, BXM2, BYM1, BYM2, BYM3, Exception, f, i, j, mathSSE::sqrt(), summarizeEdmComparisonLogfiles::success, TXSIZE, and TYSIZE.
Referenced by interpolate(), SiPixelTemplateReco::PixelTempReco2D(), SiPixelTemplateReco::PixelTempSplit(), and SiPixelGaussianSmearingRecHitConverterAlgorithm::smearHit().
{
// Interpolate for a new set of track angles
// Local variables
int i, j;
int ilow, ihigh, iylow, iyhigh, Ny, Nxx, Nyx, imidy, imaxx;
float yratio, yxratio, xxratio, sxmax, qcorrect, qxtempcor, symax, chi2xavgone, chi2xminone, cotb, cotalpha0, cotbeta0;
bool flip_y;
// std::vector <float> xrms(4), xgsig(4), xrmsc2m(4), xgsigc2m(4);
float chi2xavg[4], chi2xmin[4];
// Check to see if interpolation is valid
if(id != id_current || cotalpha != cota_current || cotbeta != cotb_current) {
cota_current = cotalpha; cotb_current = cotbeta; success = true;
if(id != id_current) {
// Find the index corresponding to id
index_id = -1;
for(i=0; i<(int)thePixelTemp.size(); ++i) {
if(id == thePixelTemp[i].head.ID) {
index_id = i;
id_current = id;
// Copy the charge scaling factor to the private variable
pqscale = thePixelTemp[index_id].head.qscale;
// Copy the pseudopixel signal size to the private variable
ps50 = thePixelTemp[index_id].head.s50;
// Pixel sizes to the private variables
pxsize = thePixelTemp[index_id].head.xsize;
pysize = thePixelTemp[index_id].head.ysize;
pzsize = thePixelTemp[index_id].head.zsize;
break;
}
}
}
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(index_id < 0 || index_id >= (int)thePixelTemp.size()) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::interpolate can't find needed template ID = " << id << std::endl;
}
#else
assert(index_id >= 0 && index_id < (int)thePixelTemp.size());
#endif
// Interpolate the absolute value of cot(beta)
abs_cotb = std::abs(cotbeta);
// qcorrect corrects the cot(alpha)=0 cluster charge for non-zero cot(alpha)
cotalpha0 = thePixelTemp[index_id].enty[0].cotalpha;
qcorrect= std::sqrt((1.f+cotbeta*cotbeta+cotalpha*cotalpha)/(1.f+cotbeta*cotbeta+cotalpha0*cotalpha0));
// for some cosmics, the ususal gymnastics are incorrect
if(thePixelTemp[index_id].head.Dtype == 0) {
cotb = abs_cotb;
flip_y = false;
if(cotbeta < 0.) {flip_y = true;}
} else {
if(locBz < 0.) {
cotb = cotbeta;
flip_y = false;
} else {
cotb = -cotbeta;
flip_y = true;
}
}
Ny = thePixelTemp[index_id].head.NTy;
Nyx = thePixelTemp[index_id].head.NTyx;
Nxx = thePixelTemp[index_id].head.NTxx;
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(Ny < 2 || Nyx < 1 || Nxx < 2) {
throw cms::Exception("DataCorrupt") << "template ID = " << id_current << "has too few entries: Ny/Nyx/Nxx = " << Ny << "/" << Nyx << "/" << Nxx << std::endl;
}
#else
assert(Ny > 1 && Nyx > 0 && Nxx > 1);
#endif
imaxx = Nyx - 1;
imidy = Nxx/2;
// next, loop over all y-angle entries
ilow = 0;
yratio = 0.;
if(cotb >= thePixelTemp[index_id].enty[Ny-1].cotbeta) {
ilow = Ny-2;
yratio = 1.;
success = false;
} else {
if(cotb >= thePixelTemp[index_id].enty[0].cotbeta) {
for (i=0; i<Ny-1; ++i) {
if( thePixelTemp[index_id].enty[i].cotbeta <= cotb && cotb < thePixelTemp[index_id].enty[i+1].cotbeta) {
ilow = i;
yratio = (cotb - thePixelTemp[index_id].enty[i].cotbeta)/(thePixelTemp[index_id].enty[i+1].cotbeta - thePixelTemp[index_id].enty[i].cotbeta);
break;
}
}
} else { success = false; }
}
ihigh=ilow + 1;
// Interpolate/store all y-related quantities (flip displacements when flip_y)
pyratio = yratio;
pqavg = (1.f - yratio)*thePixelTemp[index_id].enty[ilow].qavg + yratio*thePixelTemp[index_id].enty[ihigh].qavg;
pqavg *= qcorrect;
symax = (1.f - yratio)*thePixelTemp[index_id].enty[ilow].symax + yratio*thePixelTemp[index_id].enty[ihigh].symax;
psyparmax = symax;
sxmax = (1.f - yratio)*thePixelTemp[index_id].enty[ilow].sxmax + yratio*thePixelTemp[index_id].enty[ihigh].sxmax;
pdyone = (1.f - yratio)*thePixelTemp[index_id].enty[ilow].dyone + yratio*thePixelTemp[index_id].enty[ihigh].dyone;
if(flip_y) {pdyone = -pdyone;}
psyone = (1.f - yratio)*thePixelTemp[index_id].enty[ilow].syone + yratio*thePixelTemp[index_id].enty[ihigh].syone;
pdytwo = (1.f - yratio)*thePixelTemp[index_id].enty[ilow].dytwo + yratio*thePixelTemp[index_id].enty[ihigh].dytwo;
if(flip_y) {pdytwo = -pdytwo;}
psytwo = (1.f - yratio)*thePixelTemp[index_id].enty[ilow].sytwo + yratio*thePixelTemp[index_id].enty[ihigh].sytwo;
pqmin = (1.f - yratio)*thePixelTemp[index_id].enty[ilow].qmin + yratio*thePixelTemp[index_id].enty[ihigh].qmin;
pqmin *= qcorrect;
pqmin2 = (1.f - yratio)*thePixelTemp[index_id].enty[ilow].qmin2 + yratio*thePixelTemp[index_id].enty[ihigh].qmin2;
pqmin2 *= qcorrect;
pmpvvav = (1.f - yratio)*thePixelTemp[index_id].enty[ilow].mpvvav + yratio*thePixelTemp[index_id].enty[ihigh].mpvvav;
pmpvvav *= qcorrect;
psigmavav = (1.f - yratio)*thePixelTemp[index_id].enty[ilow].sigmavav + yratio*thePixelTemp[index_id].enty[ihigh].sigmavav;
pkappavav = (1.f - yratio)*thePixelTemp[index_id].enty[ilow].kappavav + yratio*thePixelTemp[index_id].enty[ihigh].kappavav;
pclsleny = fminf(thePixelTemp[index_id].enty[ilow].clsleny, thePixelTemp[index_id].enty[ihigh].clsleny);
pqavg_avg = (1.f - yratio)*thePixelTemp[index_id].enty[ilow].qavg_avg + yratio*thePixelTemp[index_id].enty[ihigh].qavg_avg;
pqavg_avg *= qcorrect;
for(i=0; i<2 ; ++i) {
for(j=0; j<5 ; ++j) {
// Charge loss switches sides when cot(beta) changes sign
if(flip_y) {
pyparl[1-i][j] = thePixelTemp[index_id].enty[ilow].ypar[i][j];
pyparh[1-i][j] = thePixelTemp[index_id].enty[ihigh].ypar[i][j];
} else {
pyparl[i][j] = thePixelTemp[index_id].enty[ilow].ypar[i][j];
pyparh[i][j] = thePixelTemp[index_id].enty[ihigh].ypar[i][j];
}
pxparly0[i][j] = thePixelTemp[index_id].enty[ilow].xpar[i][j];
pxparhy0[i][j] = thePixelTemp[index_id].enty[ihigh].xpar[i][j];
}
}
for(i=0; i<4; ++i) {
pyavg[i]=(1.f - yratio)*thePixelTemp[index_id].enty[ilow].yavg[i] + yratio*thePixelTemp[index_id].enty[ihigh].yavg[i];
if(flip_y) {pyavg[i] = -pyavg[i];}
pyrms[i]=(1.f - yratio)*thePixelTemp[index_id].enty[ilow].yrms[i] + yratio*thePixelTemp[index_id].enty[ihigh].yrms[i];
// pygx0[i]=(1. - yratio)*thePixelTemp[index_id].enty[ilow].ygx0[i] + yratio*thePixelTemp[index_id].enty[ihigh].ygx0[i];
// if(flip_y) {pygx0[i] = -pygx0[i];}
// pygsig[i]=(1. - yratio)*thePixelTemp[index_id].enty[ilow].ygsig[i] + yratio*thePixelTemp[index_id].enty[ihigh].ygsig[i];
// xrms[i]=(1. - yratio)*thePixelTemp[index_id].enty[ilow].xrms[i] + yratio*thePixelTemp[index_id].enty[ihigh].xrms[i];
// xgsig[i]=(1. - yratio)*thePixelTemp[index_id].enty[ilow].xgsig[i] + yratio*thePixelTemp[index_id].enty[ihigh].xgsig[i];
pchi2yavg[i]=(1.f - yratio)*thePixelTemp[index_id].enty[ilow].chi2yavg[i] + yratio*thePixelTemp[index_id].enty[ihigh].chi2yavg[i];
pchi2ymin[i]=(1.f - yratio)*thePixelTemp[index_id].enty[ilow].chi2ymin[i] + yratio*thePixelTemp[index_id].enty[ihigh].chi2ymin[i];
chi2xavg[i]=(1.f - yratio)*thePixelTemp[index_id].enty[ilow].chi2xavg[i] + yratio*thePixelTemp[index_id].enty[ihigh].chi2xavg[i];
chi2xmin[i]=(1.f - yratio)*thePixelTemp[index_id].enty[ilow].chi2xmin[i] + yratio*thePixelTemp[index_id].enty[ihigh].chi2xmin[i];
pyavgc2m[i]=(1.f - yratio)*thePixelTemp[index_id].enty[ilow].yavgc2m[i] + yratio*thePixelTemp[index_id].enty[ihigh].yavgc2m[i];
if(flip_y) {pyavgc2m[i] = -pyavgc2m[i];}
pyrmsc2m[i]=(1.f - yratio)*thePixelTemp[index_id].enty[ilow].yrmsc2m[i] + yratio*thePixelTemp[index_id].enty[ihigh].yrmsc2m[i];
// pygx0c2m[i]=(1. - yratio)*thePixelTemp[index_id].enty[ilow].ygx0c2m[i] + yratio*thePixelTemp[index_id].enty[ihigh].ygx0c2m[i];
// if(flip_y) {pygx0c2m[i] = -pygx0c2m[i];}
// pygsigc2m[i]=(1. - yratio)*thePixelTemp[index_id].enty[ilow].ygsigc2m[i] + yratio*thePixelTemp[index_id].enty[ihigh].ygsigc2m[i];
// xrmsc2m[i]=(1. - yratio)*thePixelTemp[index_id].enty[ilow].xrmsc2m[i] + yratio*thePixelTemp[index_id].enty[ihigh].xrmsc2m[i];
// xgsigc2m[i]=(1. - yratio)*thePixelTemp[index_id].enty[ilow].xgsigc2m[i] + yratio*thePixelTemp[index_id].enty[ihigh].xgsigc2m[i];
for(j=0; j<6 ; ++j) {
pyflparl[i][j] = thePixelTemp[index_id].enty[ilow].yflpar[i][j];
pyflparh[i][j] = thePixelTemp[index_id].enty[ihigh].yflpar[i][j];
// Since Q_fl is odd under cotbeta, it flips qutomatically, change only even terms
if(flip_y && (j == 0 || j == 2 || j == 4)) {
pyflparl[i][j] = - pyflparl[i][j];
pyflparh[i][j] = - pyflparh[i][j];
}
}
}
pchi2yavgone=(1.f - yratio)*thePixelTemp[index_id].enty[ilow].chi2yavgone + yratio*thePixelTemp[index_id].enty[ihigh].chi2yavgone;
pchi2yminone=(1.f - yratio)*thePixelTemp[index_id].enty[ilow].chi2yminone + yratio*thePixelTemp[index_id].enty[ihigh].chi2yminone;
chi2xavgone=(1.f - yratio)*thePixelTemp[index_id].enty[ilow].chi2xavgone + yratio*thePixelTemp[index_id].enty[ihigh].chi2xavgone;
chi2xminone=(1.f - yratio)*thePixelTemp[index_id].enty[ilow].chi2xminone + yratio*thePixelTemp[index_id].enty[ihigh].chi2xminone;
// for(i=0; i<10; ++i) {
// pyspare[i]=(1. - yratio)*thePixelTemp[index_id].enty[ilow].yspare[i] + yratio*thePixelTemp[index_id].enty[ihigh].yspare[i];
// }
// Interpolate and build the y-template
for(i=0; i<9; ++i) {
pytemp[i][0] = 0.f;
pytemp[i][1] = 0.f;
pytemp[i][BYM2] = 0.f;
pytemp[i][BYM1] = 0.f;
for(j=0; j<TYSIZE; ++j) {
// Flip the basic y-template when the cotbeta is negative
if(flip_y) {
pytemp[8-i][BYM3-j]=(1.f - yratio)*thePixelTemp[index_id].enty[ilow].ytemp[i][j] + yratio*thePixelTemp[index_id].enty[ihigh].ytemp[i][j];
} else {
pytemp[i][j+2]=(1.f - yratio)*thePixelTemp[index_id].enty[ilow].ytemp[i][j] + yratio*thePixelTemp[index_id].enty[ihigh].ytemp[i][j];
}
}
}
// next, loop over all x-angle entries, first, find relevant y-slices
iylow = 0;
yxratio = 0.f;
if(abs_cotb >= thePixelTemp[index_id].entx[Nyx-1][0].cotbeta) {
iylow = Nyx-2;
yxratio = 1.f;
} else if(abs_cotb >= thePixelTemp[index_id].entx[0][0].cotbeta) {
for (i=0; i<Nyx-1; ++i) {
if( thePixelTemp[index_id].entx[i][0].cotbeta <= abs_cotb && abs_cotb < thePixelTemp[index_id].entx[i+1][0].cotbeta) {
iylow = i;
yxratio = (abs_cotb - thePixelTemp[index_id].entx[i][0].cotbeta)/(thePixelTemp[index_id].entx[i+1][0].cotbeta - thePixelTemp[index_id].entx[i][0].cotbeta);
break;
}
}
}
iyhigh=iylow + 1;
ilow = 0;
xxratio = 0.f;
if(cotalpha >= thePixelTemp[index_id].entx[0][Nxx-1].cotalpha) {
ilow = Nxx-2;
xxratio = 1.f;
success = false;
} else {
if(cotalpha >= thePixelTemp[index_id].entx[0][0].cotalpha) {
for (i=0; i<Nxx-1; ++i) {
if( thePixelTemp[index_id].entx[0][i].cotalpha <= cotalpha && cotalpha < thePixelTemp[index_id].entx[0][i+1].cotalpha) {
ilow = i;
xxratio = (cotalpha - thePixelTemp[index_id].entx[0][i].cotalpha)/(thePixelTemp[index_id].entx[0][i+1].cotalpha - thePixelTemp[index_id].entx[0][i].cotalpha);
break;
}
}
} else { success = false; }
}
ihigh=ilow + 1;
// Interpolate/store all x-related quantities
pyxratio = yxratio;
pxxratio = xxratio;
// sxparmax defines the maximum charge for which the parameters xpar are defined (not rescaled by cotbeta)
psxparmax = (1.f - xxratio)*thePixelTemp[index_id].entx[imaxx][ilow].sxmax + xxratio*thePixelTemp[index_id].entx[imaxx][ihigh].sxmax;
psxmax = psxparmax;
if(thePixelTemp[index_id].entx[imaxx][imidy].sxmax != 0.f) {psxmax=psxmax/thePixelTemp[index_id].entx[imaxx][imidy].sxmax*sxmax;}
psymax = (1.f - xxratio)*thePixelTemp[index_id].entx[imaxx][ilow].symax + xxratio*thePixelTemp[index_id].entx[imaxx][ihigh].symax;
if(thePixelTemp[index_id].entx[imaxx][imidy].symax != 0.) {psymax=psymax/thePixelTemp[index_id].entx[imaxx][imidy].symax*symax;}
pdxone = (1.f - xxratio)*thePixelTemp[index_id].entx[0][ilow].dxone + xxratio*thePixelTemp[index_id].entx[0][ihigh].dxone;
psxone = (1.f - xxratio)*thePixelTemp[index_id].entx[0][ilow].sxone + xxratio*thePixelTemp[index_id].entx[0][ihigh].sxone;
pdxtwo = (1.f - xxratio)*thePixelTemp[index_id].entx[0][ilow].dxtwo + xxratio*thePixelTemp[index_id].entx[0][ihigh].dxtwo;
psxtwo = (1.f - xxratio)*thePixelTemp[index_id].entx[0][ilow].sxtwo + xxratio*thePixelTemp[index_id].entx[0][ihigh].sxtwo;
pclslenx = fminf(thePixelTemp[index_id].entx[0][ilow].clslenx, thePixelTemp[index_id].entx[0][ihigh].clslenx);
for(i=0; i<2 ; ++i) {
for(j=0; j<5 ; ++j) {
pxpar0[i][j] = thePixelTemp[index_id].entx[imaxx][imidy].xpar[i][j];
pxparl[i][j] = thePixelTemp[index_id].entx[imaxx][ilow].xpar[i][j];
pxparh[i][j] = thePixelTemp[index_id].entx[imaxx][ihigh].xpar[i][j];
}
}
// pixmax is the maximum allowed pixel charge (used for truncation)
ppixmax=(1.f - yxratio)*((1.f - xxratio)*thePixelTemp[index_id].entx[iylow][ilow].pixmax + xxratio*thePixelTemp[index_id].entx[iylow][ihigh].pixmax)
+yxratio*((1.f - xxratio)*thePixelTemp[index_id].entx[iyhigh][ilow].pixmax + xxratio*thePixelTemp[index_id].entx[iyhigh][ihigh].pixmax);
for(i=0; i<4; ++i) {
pxavg[i]=(1.f - yxratio)*((1.f - xxratio)*thePixelTemp[index_id].entx[iylow][ilow].xavg[i] + xxratio*thePixelTemp[index_id].entx[iylow][ihigh].xavg[i])
+yxratio*((1.f - xxratio)*thePixelTemp[index_id].entx[iyhigh][ilow].xavg[i] + xxratio*thePixelTemp[index_id].entx[iyhigh][ihigh].xavg[i]);
pxrms[i]=(1.f - yxratio)*((1.f - xxratio)*thePixelTemp[index_id].entx[iylow][ilow].xrms[i] + xxratio*thePixelTemp[index_id].entx[iylow][ihigh].xrms[i])
+yxratio*((1.f - xxratio)*thePixelTemp[index_id].entx[iyhigh][ilow].xrms[i] + xxratio*thePixelTemp[index_id].entx[iyhigh][ihigh].xrms[i]);
// pxgx0[i]=(1. - yxratio)*((1. - xxratio)*thePixelTemp[index_id].entx[iylow][ilow].xgx0[i] + xxratio*thePixelTemp[index_id].entx[iylow][ihigh].xgx0[i])
// +yxratio*((1. - xxratio)*thePixelTemp[index_id].entx[iyhigh][ilow].xgx0[i] + xxratio*thePixelTemp[index_id].entx[iyhigh][ihigh].xgx0[i]);
// pxgsig[i]=(1. - yxratio)*((1. - xxratio)*thePixelTemp[index_id].entx[iylow][ilow].xgsig[i] + xxratio*thePixelTemp[index_id].entx[iylow][ihigh].xgsig[i])
// +yxratio*((1. - xxratio)*thePixelTemp[index_id].entx[iyhigh][ilow].xgsig[i] + xxratio*thePixelTemp[index_id].entx[iyhigh][ihigh].xgsig[i]);
pxavgc2m[i]=(1.f - yxratio)*((1.f - xxratio)*thePixelTemp[index_id].entx[iylow][ilow].xavgc2m[i] + xxratio*thePixelTemp[index_id].entx[iylow][ihigh].xavgc2m[i])
+yxratio*((1.f - xxratio)*thePixelTemp[index_id].entx[iyhigh][ilow].xavgc2m[i] + xxratio*thePixelTemp[index_id].entx[iyhigh][ihigh].xavgc2m[i]);
pxrmsc2m[i]=(1.f - yxratio)*((1.f - xxratio)*thePixelTemp[index_id].entx[iylow][ilow].xrmsc2m[i] + xxratio*thePixelTemp[index_id].entx[iylow][ihigh].xrmsc2m[i])
+yxratio*((1.f - xxratio)*thePixelTemp[index_id].entx[iyhigh][ilow].xrmsc2m[i] + xxratio*thePixelTemp[index_id].entx[iyhigh][ihigh].xrmsc2m[i]);
// pxgx0c2m[i]=(1. - yxratio)*((1. - xxratio)*thePixelTemp[index_id].entx[iylow][ilow].xgx0c2m[i] + xxratio*thePixelTemp[index_id].entx[iylow][ihigh].xgx0c2m[i])
// +yxratio*((1. - xxratio)*thePixelTemp[index_id].entx[iyhigh][ilow].xgx0c2m[i] + xxratio*thePixelTemp[index_id].entx[iyhigh][ihigh].xgx0c2m[i]);
// pxgsigc2m[i]=(1. - yxratio)*((1. - xxratio)*thePixelTemp[index_id].entx[iylow][ilow].xgsigc2m[i] + xxratio*thePixelTemp[index_id].entx[iylow][ihigh].xgsigc2m[i])
// +yxratio*((1. - xxratio)*thePixelTemp[index_id].entx[iyhigh][ilow].xgsigc2m[i] + xxratio*thePixelTemp[index_id].entx[iyhigh][ihigh].xgsigc2m[i]);
//
// Try new interpolation scheme
//
// pchi2xavg[i]=((1. - xxratio)*thePixelTemp[index_id].entx[imaxx][ilow].chi2xavg[i] + xxratio*thePixelTemp[index_id].entx[imaxx][ihigh].chi2xavg[i]);
// if(thePixelTemp[index_id].entx[imaxx][imidy].chi2xavg[i] != 0.) {pchi2xavg[i]=pchi2xavg[i]/thePixelTemp[index_id].entx[imaxx][imidy].chi2xavg[i]*chi2xavg[i];}
//
// pchi2xmin[i]=((1. - xxratio)*thePixelTemp[index_id].entx[imaxx][ilow].chi2xmin[i] + xxratio*thePixelTemp[index_id].entx[imaxx][ihigh].chi2xmin[i]);
// if(thePixelTemp[index_id].entx[imaxx][imidy].chi2xmin[i] != 0.) {pchi2xmin[i]=pchi2xmin[i]/thePixelTemp[index_id].entx[imaxx][imidy].chi2xmin[i]*chi2xmin[i];}
//
pchi2xavg[i]=((1.f - xxratio)*thePixelTemp[index_id].entx[iyhigh][ilow].chi2xavg[i] + xxratio*thePixelTemp[index_id].entx[iyhigh][ihigh].chi2xavg[i]);
if(thePixelTemp[index_id].entx[iyhigh][imidy].chi2xavg[i] != 0.f) {pchi2xavg[i]=pchi2xavg[i]/thePixelTemp[index_id].entx[iyhigh][imidy].chi2xavg[i]*chi2xavg[i];}
pchi2xmin[i]=((1.f - xxratio)*thePixelTemp[index_id].entx[iyhigh][ilow].chi2xmin[i] + xxratio*thePixelTemp[index_id].entx[iyhigh][ihigh].chi2xmin[i]);
if(thePixelTemp[index_id].entx[iyhigh][imidy].chi2xmin[i] != 0.f) {pchi2xmin[i]=pchi2xmin[i]/thePixelTemp[index_id].entx[iyhigh][imidy].chi2xmin[i]*chi2xmin[i];}
for(j=0; j<6 ; ++j) {
pxflparll[i][j] = thePixelTemp[index_id].entx[iylow][ilow].xflpar[i][j];
pxflparlh[i][j] = thePixelTemp[index_id].entx[iylow][ihigh].xflpar[i][j];
pxflparhl[i][j] = thePixelTemp[index_id].entx[iyhigh][ilow].xflpar[i][j];
pxflparhh[i][j] = thePixelTemp[index_id].entx[iyhigh][ihigh].xflpar[i][j];
}
}
// Do the spares next
pchi2xavgone=((1.f - xxratio)*thePixelTemp[index_id].entx[iyhigh][ilow].chi2xavgone + xxratio*thePixelTemp[index_id].entx[iyhigh][ihigh].chi2xavgone);
if(thePixelTemp[index_id].entx[iyhigh][imidy].chi2xavgone != 0.f) {pchi2xavgone=pchi2xavgone/thePixelTemp[index_id].entx[iyhigh][imidy].chi2xavgone*chi2xavgone;}
pchi2xminone=((1.f - xxratio)*thePixelTemp[index_id].entx[iyhigh][ilow].chi2xminone + xxratio*thePixelTemp[index_id].entx[iyhigh][ihigh].chi2xminone);
if(thePixelTemp[index_id].entx[iyhigh][imidy].chi2xminone != 0.f) {pchi2xminone=pchi2xminone/thePixelTemp[index_id].entx[iyhigh][imidy].chi2xminone*chi2xminone;}
// for(i=0; i<10; ++i) {
// pxspare[i]=(1. - yxratio)*((1. - xxratio)*thePixelTemp[index_id].entx[iylow][ilow].xspare[i] + xxratio*thePixelTemp[index_id].entx[iylow][ihigh].xspare[i])
// +yxratio*((1. - xxratio)*thePixelTemp[index_id].entx[iyhigh][ilow].xspare[i] + xxratio*thePixelTemp[index_id].entx[iyhigh][ihigh].xspare[i]);
// }
// Interpolate and build the x-template
// qxtempcor corrects the total charge to the actual track angles (not actually needed for the template fits, but useful for Guofan)
cotbeta0 = thePixelTemp[index_id].entx[iyhigh][0].cotbeta;
qxtempcor=std::sqrt((1.f+cotbeta*cotbeta+cotalpha*cotalpha)/(1.f+cotbeta0*cotbeta0+cotalpha*cotalpha));
for(i=0; i<9; ++i) {
pxtemp[i][0] = 0.f;
pxtemp[i][1] = 0.f;
pxtemp[i][BXM2] = 0.f;
pxtemp[i][BXM1] = 0.f;
for(j=0; j<TXSIZE; ++j) {
// Take next largest x-slice for the x-template (it reduces bias in the forward direction after irradiation)
// pxtemp[i][j+2]=(1. - xxratio)*thePixelTemp[index_id].entx[imaxx][ilow].xtemp[i][j] + xxratio*thePixelTemp[index_id].entx[imaxx][ihigh].xtemp[i][j];
// pxtemp[i][j+2]=(1. - xxratio)*thePixelTemp[index_id].entx[iyhigh][ilow].xtemp[i][j] + xxratio*thePixelTemp[index_id].entx[iyhigh][ihigh].xtemp[i][j];
pxtemp[i][j+2]=qxtempcor*((1.f - xxratio)*thePixelTemp[index_id].entx[iyhigh][ilow].xtemp[i][j] + xxratio*thePixelTemp[index_id].entx[iyhigh][ihigh].xtemp[i][j]);
}
}
plorywidth = thePixelTemp[index_id].head.lorywidth;
if(locBz > 0.f) {plorywidth = -plorywidth;}
plorxwidth = thePixelTemp[index_id].head.lorxwidth;
}
return success;
} // interpolate
| float SiPixelTemplate::kappavav | ( | ) | [inline] |
kappa parameter for Vavilov distribution
Definition at line 446 of file SiPixelTemplate.h.
References pkappavav.
| float SiPixelTemplate::lorxwidth | ( | ) | [inline] |
signed lorentz x-width (microns)
Definition at line 443 of file SiPixelTemplate.h.
References plorxwidth.
| float SiPixelTemplate::lorywidth | ( | ) | [inline] |
signed lorentz y-width (microns)
Definition at line 442 of file SiPixelTemplate.h.
References plorywidth.
| float SiPixelTemplate::mpvvav | ( | ) | [inline] |
most probable charge in Vavilov distribution (not actually for larger kappa)
Definition at line 444 of file SiPixelTemplate.h.
References pmpvvav.
| float SiPixelTemplate::pixmax | ( | ) | [inline] |
maximum pixel charge
Definition at line 272 of file SiPixelTemplate.h.
References ppixmax.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| bool SiPixelTemplate::pushfile | ( | const SiPixelTemplateDBObject & | dbobject | ) |
This routine initializes the global template structures from an external file template_summary_zpNNNN where NNNN are four digits
| dbobject | - db storing multiple template calibrations |
Definition at line 484 of file SiPixelTemplate.cc.
References SiPixelTemplateEntry::alpha, SiPixelTemplateEntry::beta, SiPixelTemplateHeader::Bfield, SiPixelTemplateDBObject::char2float::c, SiPixelTemplateEntry::chi2xavg, SiPixelTemplateEntry::chi2xavgone, SiPixelTemplateEntry::chi2xmin, SiPixelTemplateEntry::chi2xminone, SiPixelTemplateEntry::chi2yavg, SiPixelTemplateEntry::chi2yavgone, SiPixelTemplateEntry::chi2ymin, SiPixelTemplateEntry::chi2yminone, SiPixelTemplateEntry::clslenx, SiPixelTemplateEntry::clsleny, SiPixelTemplateEntry::costrk, SiPixelTemplateEntry::cotalpha, SiPixelTemplateEntry::cotbeta, EcalCondDB::db, SiPixelTemplateHeader::Dtype, SiPixelTemplateEntry::dxone, SiPixelTemplateEntry::dxtwo, SiPixelTemplateEntry::dyone, SiPixelTemplateEntry::dytwo, ENDL, SiPixelTemplateStore::entx, SiPixelTemplateStore::enty, SiPixelTemplateDBObject::char2float::f, SiPixelTemplateDBObject::fail(), SiPixelTemplateHeader::fluence, SiPixelTemplateEntry::fracxone, SiPixelTemplateEntry::fracxtwo, SiPixelTemplateEntry::fracyone, SiPixelTemplateEntry::fracytwo, SiPixelTemplateStore::head, i, SiPixelTemplateHeader::ID, SiPixelTemplateDBObject::incrementIndex(), SiPixelTemplateDBObject::index(), j, gen::k, SiPixelTemplateEntry::kappavav, prof2calltree::l, LOGERROR, LOGINFO, SiPixelTemplateHeader::lorxwidth, SiPixelTemplateHeader::lorywidth, m, SiPixelTemplateEntry::mpvvav, SiPixelTemplateHeader::NTxx, SiPixelTemplateHeader::NTy, SiPixelTemplateHeader::NTyx, SiPixelTemplateDBObject::numOfTempl(), SiPixelTemplateEntry::pixmax, SiPixelTemplateEntry::qavg, SiPixelTemplateEntry::qavg_avg, SiPixelTemplateEntry::qavg_spare, SiPixelTemplateEntry::qbfrac, SiPixelTemplateEntry::qmin, SiPixelTemplateEntry::qmin2, SiPixelTemplateHeader::qscale, SiPixelTemplateEntry::runnum, SiPixelTemplateHeader::s50, SiPixelTemplateEntry::sigmavav, SiPixelTemplateEntry::spare, SiPixelTemplateDBObject::sVector(), SiPixelTemplateEntry::sxmax, SiPixelTemplateEntry::sxone, SiPixelTemplateEntry::sxtwo, SiPixelTemplateEntry::symax, SiPixelTemplateEntry::syone, SiPixelTemplateEntry::sytwo, cond::rpcobtemp::temp, SiPixelTemplateHeader::temperature, SiPixelTemplateHeader::templ_version, SiPixelTemplateHeader::title, TXSIZE, TYSIZE, SiPixelTemplateHeader::Vbias, SiPixelTemplateEntry::xavg, SiPixelTemplateEntry::xavgc2m, SiPixelTemplateEntry::xavggen, SiPixelTemplateEntry::xflpar, SiPixelTemplateEntry::xgsig, SiPixelTemplateEntry::xgsigc2m, SiPixelTemplateEntry::xgsiggen, SiPixelTemplateEntry::xgx0, SiPixelTemplateEntry::xgx0c2m, SiPixelTemplateEntry::xgx0gen, SiPixelTemplateEntry::xpar, SiPixelTemplateEntry::xrms, SiPixelTemplateEntry::xrmsc2m, SiPixelTemplateEntry::xrmsgen, SiPixelTemplateHeader::xsize, SiPixelTemplateEntry::xtemp, SiPixelTemplateEntry::yavg, SiPixelTemplateEntry::yavgc2m, SiPixelTemplateEntry::yavggen, SiPixelTemplateEntry::yflpar, SiPixelTemplateEntry::ygsig, SiPixelTemplateEntry::ygsigc2m, SiPixelTemplateEntry::ygsiggen, SiPixelTemplateEntry::ygx0, SiPixelTemplateEntry::ygx0c2m, SiPixelTemplateEntry::ygx0gen, SiPixelTemplateEntry::ypar, SiPixelTemplateEntry::yrms, SiPixelTemplateEntry::yrmsc2m, SiPixelTemplateEntry::yrmsgen, SiPixelTemplateHeader::ysize, SiPixelTemplateEntry::ytemp, and SiPixelTemplateHeader::zsize.
{
// Add template stored in external dbobject to theTemplateStore
// Local variables
int i, j, k, l;
float qavg_avg;
// const char *tempfile;
const int code_version={16};
// We must create a new object because dbobject must be a const and our stream must not be
SiPixelTemplateDBObject db = dbobject;
// Create a local template storage entry
SiPixelTemplateStore theCurrentTemp;
// Fill the template storage for each template calibration stored in the db
for(int m=0; m<db.numOfTempl(); ++m)
{
// Read-in a header string first and print it
SiPixelTemplateDBObject::char2float temp;
for (i=0; i<20; ++i) {
temp.f = db.sVector()[db.index()];
theCurrentTemp.head.title[4*i] = temp.c[0];
theCurrentTemp.head.title[4*i+1] = temp.c[1];
theCurrentTemp.head.title[4*i+2] = temp.c[2];
theCurrentTemp.head.title[4*i+3] = temp.c[3];
db.incrementIndex(1);
}
theCurrentTemp.head.title[79] = '\0';
LOGINFO("SiPixelTemplate") << "Loading Pixel Template File - " << theCurrentTemp.head.title << ENDL;
// next, the header information
db >> theCurrentTemp.head.ID >> theCurrentTemp.head.templ_version >> theCurrentTemp.head.Bfield >> theCurrentTemp.head.NTy >> theCurrentTemp.head.NTyx >> theCurrentTemp.head.NTxx
>> theCurrentTemp.head.Dtype >> theCurrentTemp.head.Vbias >> theCurrentTemp.head.temperature >> theCurrentTemp.head.fluence >> theCurrentTemp.head.qscale
>> theCurrentTemp.head.s50 >> theCurrentTemp.head.lorywidth >> theCurrentTemp.head.lorxwidth >> theCurrentTemp.head.ysize >> theCurrentTemp.head.xsize >> theCurrentTemp.head.zsize;
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file, no template load" << ENDL; return false;}
LOGINFO("SiPixelTemplate") << "Template ID = " << theCurrentTemp.head.ID << ", Template Version " << theCurrentTemp.head.templ_version << ", Bfield = " << theCurrentTemp.head.Bfield
<< ", NTy = " << theCurrentTemp.head.NTy << ", NTyx = " << theCurrentTemp.head.NTyx<< ", NTxx = " << theCurrentTemp.head.NTxx << ", Dtype = " << theCurrentTemp.head.Dtype
<< ", Bias voltage " << theCurrentTemp.head.Vbias << ", temperature "
<< theCurrentTemp.head.temperature << ", fluence " << theCurrentTemp.head.fluence << ", Q-scaling factor " << theCurrentTemp.head.qscale
<< ", 1/2 threshold " << theCurrentTemp.head.s50 << ", y Lorentz Width " << theCurrentTemp.head.lorywidth << ", x Lorentz width " << theCurrentTemp.head.lorxwidth
<< ", pixel x-size " << theCurrentTemp.head.xsize << ", y-size " << theCurrentTemp.head.ysize << ", zsize " << theCurrentTemp.head.zsize << ENDL;
if(theCurrentTemp.head.templ_version < code_version) {LOGERROR("SiPixelTemplate") << "code expects version " << code_version << ", no template load" << ENDL; return false;}
// next, loop over all barrel y-angle entries
for (i=0; i < theCurrentTemp.head.NTy; ++i) {
db >> theCurrentTemp.enty[i].runnum >> theCurrentTemp.enty[i].costrk[0]
>> theCurrentTemp.enty[i].costrk[1] >> theCurrentTemp.enty[i].costrk[2];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 1, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
// Calculate the alpha, beta, and cot(beta) for this entry
theCurrentTemp.enty[i].alpha = static_cast<float>(atan2((double)theCurrentTemp.enty[i].costrk[2], (double)theCurrentTemp.enty[i].costrk[0]));
theCurrentTemp.enty[i].cotalpha = theCurrentTemp.enty[i].costrk[0]/theCurrentTemp.enty[i].costrk[2];
theCurrentTemp.enty[i].beta = static_cast<float>(atan2((double)theCurrentTemp.enty[i].costrk[2], (double)theCurrentTemp.enty[i].costrk[1]));
theCurrentTemp.enty[i].cotbeta = theCurrentTemp.enty[i].costrk[1]/theCurrentTemp.enty[i].costrk[2];
db >> theCurrentTemp.enty[i].qavg >> theCurrentTemp.enty[i].pixmax >> theCurrentTemp.enty[i].symax >> theCurrentTemp.enty[i].dyone
>> theCurrentTemp.enty[i].syone >> theCurrentTemp.enty[i].sxmax >> theCurrentTemp.enty[i].dxone >> theCurrentTemp.enty[i].sxone;
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 2, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
db >> theCurrentTemp.enty[i].dytwo >> theCurrentTemp.enty[i].sytwo >> theCurrentTemp.enty[i].dxtwo
>> theCurrentTemp.enty[i].sxtwo >> theCurrentTemp.enty[i].qmin >> theCurrentTemp.enty[i].clsleny >> theCurrentTemp.enty[i].clslenx;
// >> theCurrentTemp.enty[i].mpvvav >> theCurrentTemp.enty[i].sigmavav >> theCurrentTemp.enty[i].kappavav;
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 3, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
for (j=0; j<2; ++j) {
db >> theCurrentTemp.enty[i].ypar[j][0] >> theCurrentTemp.enty[i].ypar[j][1]
>> theCurrentTemp.enty[i].ypar[j][2] >> theCurrentTemp.enty[i].ypar[j][3] >> theCurrentTemp.enty[i].ypar[j][4];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 4, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<9; ++j) {
for (k=0; k<TYSIZE; ++k) {db >> theCurrentTemp.enty[i].ytemp[j][k];}
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 5, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<2; ++j) {
db >> theCurrentTemp.enty[i].xpar[j][0] >> theCurrentTemp.enty[i].xpar[j][1]
>> theCurrentTemp.enty[i].xpar[j][2] >> theCurrentTemp.enty[i].xpar[j][3] >> theCurrentTemp.enty[i].xpar[j][4];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 6, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
qavg_avg = 0.;
for (j=0; j<9; ++j) {
for (k=0; k<TXSIZE; ++k) {db >> theCurrentTemp.enty[i].xtemp[j][k]; qavg_avg += theCurrentTemp.enty[i].xtemp[j][k];}
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 7, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
theCurrentTemp.enty[i].qavg_avg = qavg_avg/9.;
for (j=0; j<4; ++j) {
db >> theCurrentTemp.enty[i].yavg[j] >> theCurrentTemp.enty[i].yrms[j] >> theCurrentTemp.enty[i].ygx0[j] >> theCurrentTemp.enty[i].ygsig[j];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 8, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
db >> theCurrentTemp.enty[i].yflpar[j][0] >> theCurrentTemp.enty[i].yflpar[j][1] >> theCurrentTemp.enty[i].yflpar[j][2]
>> theCurrentTemp.enty[i].yflpar[j][3] >> theCurrentTemp.enty[i].yflpar[j][4] >> theCurrentTemp.enty[i].yflpar[j][5];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 9, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
db >> theCurrentTemp.enty[i].xavg[j] >> theCurrentTemp.enty[i].xrms[j] >> theCurrentTemp.enty[i].xgx0[j] >> theCurrentTemp.enty[i].xgsig[j];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 10, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
db >> theCurrentTemp.enty[i].xflpar[j][0] >> theCurrentTemp.enty[i].xflpar[j][1] >> theCurrentTemp.enty[i].xflpar[j][2]
>> theCurrentTemp.enty[i].xflpar[j][3] >> theCurrentTemp.enty[i].xflpar[j][4] >> theCurrentTemp.enty[i].xflpar[j][5];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 11, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
db >> theCurrentTemp.enty[i].chi2yavg[j] >> theCurrentTemp.enty[i].chi2ymin[j] >> theCurrentTemp.enty[i].chi2xavg[j] >> theCurrentTemp.enty[i].chi2xmin[j];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 12, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
db >> theCurrentTemp.enty[i].yavgc2m[j] >> theCurrentTemp.enty[i].yrmsc2m[j] >> theCurrentTemp.enty[i].ygx0c2m[j] >> theCurrentTemp.enty[i].ygsigc2m[j];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 13, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
db >> theCurrentTemp.enty[i].xavgc2m[j] >> theCurrentTemp.enty[i].xrmsc2m[j] >> theCurrentTemp.enty[i].xgx0c2m[j] >> theCurrentTemp.enty[i].xgsigc2m[j];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 14, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
db >> theCurrentTemp.enty[i].yavggen[j] >> theCurrentTemp.enty[i].yrmsgen[j] >> theCurrentTemp.enty[i].ygx0gen[j] >> theCurrentTemp.enty[i].ygsiggen[j];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 14a, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
db >> theCurrentTemp.enty[i].xavggen[j] >> theCurrentTemp.enty[i].xrmsgen[j] >> theCurrentTemp.enty[i].xgx0gen[j] >> theCurrentTemp.enty[i].xgsiggen[j];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 14b, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
db >> theCurrentTemp.enty[i].chi2yavgone >> theCurrentTemp.enty[i].chi2yminone >> theCurrentTemp.enty[i].chi2xavgone >> theCurrentTemp.enty[i].chi2xminone >> theCurrentTemp.enty[i].qmin2
>> theCurrentTemp.enty[i].mpvvav >> theCurrentTemp.enty[i].sigmavav >> theCurrentTemp.enty[i].kappavav >> theCurrentTemp.enty[i].qavg_spare >> theCurrentTemp.enty[i].spare[0];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 15, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
db >> theCurrentTemp.enty[i].spare[1] >> theCurrentTemp.enty[i].spare[2] >> theCurrentTemp.enty[i].spare[3] >> theCurrentTemp.enty[i].qbfrac[0] >> theCurrentTemp.enty[i].qbfrac[1]
>> theCurrentTemp.enty[i].qbfrac[2] >> theCurrentTemp.enty[i].fracyone >> theCurrentTemp.enty[i].fracxone >> theCurrentTemp.enty[i].fracytwo >> theCurrentTemp.enty[i].fracxtwo;
// theCurrentTemp.enty[i].qbfrac[3] = 1. - theCurrentTemp.enty[i].qbfrac[0] - theCurrentTemp.enty[i].qbfrac[1] - theCurrentTemp.enty[i].qbfrac[2];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 16, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
// next, loop over all barrel x-angle entries
for (k=0; k < theCurrentTemp.head.NTyx; ++k) {
for (i=0; i < theCurrentTemp.head.NTxx; ++i) {
db >> theCurrentTemp.entx[k][i].runnum >> theCurrentTemp.entx[k][i].costrk[0]
>> theCurrentTemp.entx[k][i].costrk[1] >> theCurrentTemp.entx[k][i].costrk[2];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 17, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
// Calculate the alpha, beta, and cot(beta) for this entry
theCurrentTemp.entx[k][i].alpha = static_cast<float>(atan2((double)theCurrentTemp.entx[k][i].costrk[2], (double)theCurrentTemp.entx[k][i].costrk[0]));
theCurrentTemp.entx[k][i].cotalpha = theCurrentTemp.entx[k][i].costrk[0]/theCurrentTemp.entx[k][i].costrk[2];
theCurrentTemp.entx[k][i].beta = static_cast<float>(atan2((double)theCurrentTemp.entx[k][i].costrk[2], (double)theCurrentTemp.entx[k][i].costrk[1]));
theCurrentTemp.entx[k][i].cotbeta = theCurrentTemp.entx[k][i].costrk[1]/theCurrentTemp.entx[k][i].costrk[2];
db >> theCurrentTemp.entx[k][i].qavg >> theCurrentTemp.entx[k][i].pixmax >> theCurrentTemp.entx[k][i].symax >> theCurrentTemp.entx[k][i].dyone
>> theCurrentTemp.entx[k][i].syone >> theCurrentTemp.entx[k][i].sxmax >> theCurrentTemp.entx[k][i].dxone >> theCurrentTemp.entx[k][i].sxone;
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 18, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
db >> theCurrentTemp.entx[k][i].dytwo >> theCurrentTemp.entx[k][i].sytwo >> theCurrentTemp.entx[k][i].dxtwo
>> theCurrentTemp.entx[k][i].sxtwo >> theCurrentTemp.entx[k][i].qmin >> theCurrentTemp.entx[k][i].clsleny >> theCurrentTemp.entx[k][i].clslenx;
// >> theCurrentTemp.entx[k][i].mpvvav >> theCurrentTemp.entx[k][i].sigmavav >> theCurrentTemp.entx[k][i].kappavav;
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 19, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
for (j=0; j<2; ++j) {
db >> theCurrentTemp.entx[k][i].ypar[j][0] >> theCurrentTemp.entx[k][i].ypar[j][1]
>> theCurrentTemp.entx[k][i].ypar[j][2] >> theCurrentTemp.entx[k][i].ypar[j][3] >> theCurrentTemp.entx[k][i].ypar[j][4];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 20, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<9; ++j) {
for (l=0; l<TYSIZE; ++l) {db >> theCurrentTemp.entx[k][i].ytemp[j][l];}
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 21, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<2; ++j) {
db >> theCurrentTemp.entx[k][i].xpar[j][0] >> theCurrentTemp.entx[k][i].xpar[j][1]
>> theCurrentTemp.entx[k][i].xpar[j][2] >> theCurrentTemp.entx[k][i].xpar[j][3] >> theCurrentTemp.entx[k][i].xpar[j][4];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 22, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
qavg_avg = 0.;
for (j=0; j<9; ++j) {
for (l=0; l<TXSIZE; ++l) {db >> theCurrentTemp.entx[k][i].xtemp[j][l]; qavg_avg += theCurrentTemp.entx[k][i].xtemp[j][l];}
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 23, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
theCurrentTemp.entx[k][i].qavg_avg = qavg_avg/9.;
for (j=0; j<4; ++j) {
db >> theCurrentTemp.entx[k][i].yavg[j] >> theCurrentTemp.entx[k][i].yrms[j] >> theCurrentTemp.entx[k][i].ygx0[j] >> theCurrentTemp.entx[k][i].ygsig[j];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 24, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
db >> theCurrentTemp.entx[k][i].yflpar[j][0] >> theCurrentTemp.entx[k][i].yflpar[j][1] >> theCurrentTemp.entx[k][i].yflpar[j][2]
>> theCurrentTemp.entx[k][i].yflpar[j][3] >> theCurrentTemp.entx[k][i].yflpar[j][4] >> theCurrentTemp.entx[k][i].yflpar[j][5];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 25, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
db >> theCurrentTemp.entx[k][i].xavg[j] >> theCurrentTemp.entx[k][i].xrms[j] >> theCurrentTemp.entx[k][i].xgx0[j] >> theCurrentTemp.entx[k][i].xgsig[j];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 26, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
db >> theCurrentTemp.entx[k][i].xflpar[j][0] >> theCurrentTemp.entx[k][i].xflpar[j][1] >> theCurrentTemp.entx[k][i].xflpar[j][2]
>> theCurrentTemp.entx[k][i].xflpar[j][3] >> theCurrentTemp.entx[k][i].xflpar[j][4] >> theCurrentTemp.entx[k][i].xflpar[j][5];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 27, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
db >> theCurrentTemp.entx[k][i].chi2yavg[j] >> theCurrentTemp.entx[k][i].chi2ymin[j] >> theCurrentTemp.entx[k][i].chi2xavg[j] >> theCurrentTemp.entx[k][i].chi2xmin[j];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 28, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
db >> theCurrentTemp.entx[k][i].yavgc2m[j] >> theCurrentTemp.entx[k][i].yrmsc2m[j] >> theCurrentTemp.entx[k][i].ygx0c2m[j] >> theCurrentTemp.entx[k][i].ygsigc2m[j];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 29, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
db >> theCurrentTemp.entx[k][i].xavgc2m[j] >> theCurrentTemp.entx[k][i].xrmsc2m[j] >> theCurrentTemp.entx[k][i].xgx0c2m[j] >> theCurrentTemp.entx[k][i].xgsigc2m[j];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 30, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
db >> theCurrentTemp.entx[k][i].yavggen[j] >> theCurrentTemp.entx[k][i].yrmsgen[j] >> theCurrentTemp.entx[k][i].ygx0gen[j] >> theCurrentTemp.entx[k][i].ygsiggen[j];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 30a, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
db >> theCurrentTemp.entx[k][i].xavggen[j] >> theCurrentTemp.entx[k][i].xrmsgen[j] >> theCurrentTemp.entx[k][i].xgx0gen[j] >> theCurrentTemp.entx[k][i].xgsiggen[j];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 30b, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
db >> theCurrentTemp.entx[k][i].chi2yavgone >> theCurrentTemp.entx[k][i].chi2yminone >> theCurrentTemp.entx[k][i].chi2xavgone >> theCurrentTemp.entx[k][i].chi2xminone >> theCurrentTemp.entx[k][i].qmin2
>> theCurrentTemp.entx[k][i].mpvvav >> theCurrentTemp.entx[k][i].sigmavav >> theCurrentTemp.entx[k][i].kappavav >> theCurrentTemp.entx[k][i].qavg_spare >> theCurrentTemp.entx[k][i].spare[0];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 31, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
db >> theCurrentTemp.entx[k][i].spare[1] >> theCurrentTemp.entx[k][i].spare[2] >> theCurrentTemp.entx[k][i].spare[3] >> theCurrentTemp.entx[k][i].qbfrac[0] >> theCurrentTemp.entx[k][i].qbfrac[1]
>> theCurrentTemp.entx[k][i].qbfrac[2] >> theCurrentTemp.entx[k][i].fracyone >> theCurrentTemp.entx[k][i].fracxone >> theCurrentTemp.entx[k][i].fracytwo >> theCurrentTemp.entx[k][i].fracxtwo;
// theCurrentTemp.entx[k][i].qbfrac[3] = 1. - theCurrentTemp.entx[k][i].qbfrac[0] - theCurrentTemp.entx[k][i].qbfrac[1] - theCurrentTemp.entx[k][i].qbfrac[2];
if(db.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 32, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
}
// Add this template to the store
thePixelTemp.push_back(theCurrentTemp);
}
return true;
} // TempInit
| bool SiPixelTemplate::pushfile | ( | int | filenum | ) |
This routine initializes the global template structures from an external file template_summary_zpNNNN where NNNN are four digits of filenum.
| filenum | - an integer NNNN used in the filename template_summary_zpNNNN |
Definition at line 103 of file SiPixelTemplate.cc.
References SiPixelTemplateEntry::alpha, SiPixelTemplateEntry::beta, SiPixelTemplateHeader::Bfield, trackerHits::c, SiPixelTemplateEntry::chi2xavg, SiPixelTemplateEntry::chi2xavgone, SiPixelTemplateEntry::chi2xmin, SiPixelTemplateEntry::chi2xminone, SiPixelTemplateEntry::chi2yavg, SiPixelTemplateEntry::chi2yavgone, SiPixelTemplateEntry::chi2ymin, SiPixelTemplateEntry::chi2yminone, SiPixelTemplateEntry::clslenx, SiPixelTemplateEntry::clsleny, SiPixelTemplateEntry::costrk, SiPixelTemplateEntry::cotalpha, SiPixelTemplateEntry::cotbeta, SiPixelTemplateHeader::Dtype, SiPixelTemplateEntry::dxone, SiPixelTemplateEntry::dxtwo, SiPixelTemplateEntry::dyone, SiPixelTemplateEntry::dytwo, ENDL, SiPixelTemplateStore::entx, SiPixelTemplateStore::enty, mergeVDriftHistosByStation::file, SiPixelTemplateHeader::fluence, SiPixelTemplateEntry::fracxone, SiPixelTemplateEntry::fracxtwo, SiPixelTemplateEntry::fracyone, SiPixelTemplateEntry::fracytwo, SiPixelTemplateStore::head, i, SiPixelTemplateHeader::ID, recoMuon::in, j, gen::k, SiPixelTemplateEntry::kappavav, prof2calltree::l, LOGERROR, LOGINFO, SiPixelTemplateHeader::lorxwidth, SiPixelTemplateHeader::lorywidth, SiPixelTemplateEntry::mpvvav, SiPixelTemplateHeader::NTxx, SiPixelTemplateHeader::NTy, SiPixelTemplateHeader::NTyx, SiPixelTemplateEntry::pixmax, SiPixelTemplateEntry::qavg, SiPixelTemplateEntry::qavg_avg, SiPixelTemplateEntry::qavg_spare, SiPixelTemplateEntry::qbfrac, SiPixelTemplateEntry::qmin, SiPixelTemplateEntry::qmin2, SiPixelTemplateHeader::qscale, SiPixelTemplateEntry::runnum, SiPixelTemplateHeader::s50, SiPixelTemplateEntry::sigmavav, SiPixelTemplateEntry::spare, SiPixelTemplateEntry::sxmax, SiPixelTemplateEntry::sxone, SiPixelTemplateEntry::sxtwo, SiPixelTemplateEntry::symax, SiPixelTemplateEntry::syone, SiPixelTemplateEntry::sytwo, SiPixelTemplateHeader::temperature, SiPixelTemplateHeader::templ_version, SiPixelTemplateHeader::title, TXSIZE, TYSIZE, SiPixelTemplateHeader::Vbias, SiPixelTemplateEntry::xavg, SiPixelTemplateEntry::xavgc2m, SiPixelTemplateEntry::xavggen, SiPixelTemplateEntry::xflpar, SiPixelTemplateEntry::xgsig, SiPixelTemplateEntry::xgsigc2m, SiPixelTemplateEntry::xgsiggen, SiPixelTemplateEntry::xgx0, SiPixelTemplateEntry::xgx0c2m, SiPixelTemplateEntry::xgx0gen, SiPixelTemplateEntry::xpar, SiPixelTemplateEntry::xrms, SiPixelTemplateEntry::xrmsc2m, SiPixelTemplateEntry::xrmsgen, SiPixelTemplateHeader::xsize, SiPixelTemplateEntry::xtemp, SiPixelTemplateEntry::yavg, SiPixelTemplateEntry::yavgc2m, SiPixelTemplateEntry::yavggen, SiPixelTemplateEntry::yflpar, SiPixelTemplateEntry::ygsig, SiPixelTemplateEntry::ygsigc2m, SiPixelTemplateEntry::ygsiggen, SiPixelTemplateEntry::ygx0, SiPixelTemplateEntry::ygx0c2m, SiPixelTemplateEntry::ygx0gen, SiPixelTemplateEntry::ypar, SiPixelTemplateEntry::yrms, SiPixelTemplateEntry::yrmsc2m, SiPixelTemplateEntry::yrmsgen, SiPixelTemplateHeader::ysize, SiPixelTemplateEntry::ytemp, and SiPixelTemplateHeader::zsize.
Referenced by PixelCPEGeneric::PixelCPEGeneric(), PixelCPETemplateReco::PixelCPETemplateReco(), and SiPixelGaussianSmearingRecHitConverterAlgorithm::SiPixelGaussianSmearingRecHitConverterAlgorithm().
{
// Add template stored in external file numbered filenum to theTemplateStore
// Local variables
int i, j, k, l;
float qavg_avg;
const char *tempfile;
// char title[80]; remove this
char c;
const int code_version={16};
// Create a filename for this run
std::ostringstream tout;
// Create different path in CMSSW than standalone
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
tout << "CalibTracker/SiPixelESProducers/data/template_summary_zp"
<< std::setw(4) << std::setfill('0') << std::right << filenum << ".out" << std::ends;
std::string tempf = tout.str();
edm::FileInPath file( tempf.c_str() );
tempfile = (file.fullPath()).c_str();
#else
tout << "template_summary_zp" << std::setw(4) << std::setfill('0') << std::right << filenum << ".out" << std::ends;
std::string tempf = tout.str();
tempfile = tempf.c_str();
#endif
// open the template file
std::ifstream in_file(tempfile, std::ios::in);
if(in_file.is_open()) {
// Create a local template storage entry
SiPixelTemplateStore theCurrentTemp;
// Read-in a header string first and print it
for (i=0; (c=in_file.get()) != '\n'; ++i) {
if(i < 79) {theCurrentTemp.head.title[i] = c;}
}
if(i > 78) {i=78;}
theCurrentTemp.head.title[i+1] ='\0';
LOGINFO("SiPixelTemplate") << "Loading Pixel Template File - " << theCurrentTemp.head.title << ENDL;
// next, the header information
in_file >> theCurrentTemp.head.ID >> theCurrentTemp.head.templ_version >> theCurrentTemp.head.Bfield >> theCurrentTemp.head.NTy >> theCurrentTemp.head.NTyx >> theCurrentTemp.head.NTxx
>> theCurrentTemp.head.Dtype >> theCurrentTemp.head.Vbias >> theCurrentTemp.head.temperature >> theCurrentTemp.head.fluence >> theCurrentTemp.head.qscale
>> theCurrentTemp.head.s50 >> theCurrentTemp.head.lorywidth >> theCurrentTemp.head.lorxwidth >> theCurrentTemp.head.ysize >> theCurrentTemp.head.xsize >> theCurrentTemp.head.zsize;
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file, no template load" << ENDL; return false;}
LOGINFO("SiPixelTemplate") << "Template ID = " << theCurrentTemp.head.ID << ", Template Version " << theCurrentTemp.head.templ_version << ", Bfield = " << theCurrentTemp.head.Bfield
<< ", NTy = " << theCurrentTemp.head.NTy << ", NTyx = " << theCurrentTemp.head.NTyx<< ", NTxx = " << theCurrentTemp.head.NTxx << ", Dtype = " << theCurrentTemp.head.Dtype
<< ", Bias voltage " << theCurrentTemp.head.Vbias << ", temperature "
<< theCurrentTemp.head.temperature << ", fluence " << theCurrentTemp.head.fluence << ", Q-scaling factor " << theCurrentTemp.head.qscale
<< ", 1/2 threshold " << theCurrentTemp.head.s50 << ", y Lorentz Width " << theCurrentTemp.head.lorywidth << ", x Lorentz width " << theCurrentTemp.head.lorxwidth
<< ", pixel x-size " << theCurrentTemp.head.xsize << ", y-size " << theCurrentTemp.head.ysize << ", zsize " << theCurrentTemp.head.zsize << ENDL;
if(theCurrentTemp.head.templ_version < code_version) {LOGERROR("SiPixelTemplate") << "code expects version " << code_version << ", no template load" << ENDL; return false;}
// next, loop over all y-angle entries
for (i=0; i < theCurrentTemp.head.NTy; ++i) {
in_file >> theCurrentTemp.enty[i].runnum >> theCurrentTemp.enty[i].costrk[0]
>> theCurrentTemp.enty[i].costrk[1] >> theCurrentTemp.enty[i].costrk[2];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 1, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
// Calculate the alpha, beta, and cot(beta) for this entry
theCurrentTemp.enty[i].alpha = static_cast<float>(atan2((double)theCurrentTemp.enty[i].costrk[2], (double)theCurrentTemp.enty[i].costrk[0]));
theCurrentTemp.enty[i].cotalpha = theCurrentTemp.enty[i].costrk[0]/theCurrentTemp.enty[i].costrk[2];
theCurrentTemp.enty[i].beta = static_cast<float>(atan2((double)theCurrentTemp.enty[i].costrk[2], (double)theCurrentTemp.enty[i].costrk[1]));
theCurrentTemp.enty[i].cotbeta = theCurrentTemp.enty[i].costrk[1]/theCurrentTemp.enty[i].costrk[2];
in_file >> theCurrentTemp.enty[i].qavg >> theCurrentTemp.enty[i].pixmax >> theCurrentTemp.enty[i].symax >> theCurrentTemp.enty[i].dyone
>> theCurrentTemp.enty[i].syone >> theCurrentTemp.enty[i].sxmax >> theCurrentTemp.enty[i].dxone >> theCurrentTemp.enty[i].sxone;
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 2, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
in_file >> theCurrentTemp.enty[i].dytwo >> theCurrentTemp.enty[i].sytwo >> theCurrentTemp.enty[i].dxtwo
>> theCurrentTemp.enty[i].sxtwo >> theCurrentTemp.enty[i].qmin >> theCurrentTemp.enty[i].clsleny >> theCurrentTemp.enty[i].clslenx;
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 3, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
for (j=0; j<2; ++j) {
in_file >> theCurrentTemp.enty[i].ypar[j][0] >> theCurrentTemp.enty[i].ypar[j][1]
>> theCurrentTemp.enty[i].ypar[j][2] >> theCurrentTemp.enty[i].ypar[j][3] >> theCurrentTemp.enty[i].ypar[j][4];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 4, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<9; ++j) {
for (k=0; k<TYSIZE; ++k) {in_file >> theCurrentTemp.enty[i].ytemp[j][k];}
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 5, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<2; ++j) {
in_file >> theCurrentTemp.enty[i].xpar[j][0] >> theCurrentTemp.enty[i].xpar[j][1]
>> theCurrentTemp.enty[i].xpar[j][2] >> theCurrentTemp.enty[i].xpar[j][3] >> theCurrentTemp.enty[i].xpar[j][4];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 6, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
qavg_avg = 0.;
for (j=0; j<9; ++j) {
for (k=0; k<TXSIZE; ++k) {in_file >> theCurrentTemp.enty[i].xtemp[j][k]; qavg_avg += theCurrentTemp.enty[i].xtemp[j][k];}
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 7, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
theCurrentTemp.enty[i].qavg_avg = qavg_avg/9.;
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.enty[i].yavg[j] >> theCurrentTemp.enty[i].yrms[j] >> theCurrentTemp.enty[i].ygx0[j] >> theCurrentTemp.enty[i].ygsig[j];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 8, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.enty[i].yflpar[j][0] >> theCurrentTemp.enty[i].yflpar[j][1] >> theCurrentTemp.enty[i].yflpar[j][2]
>> theCurrentTemp.enty[i].yflpar[j][3] >> theCurrentTemp.enty[i].yflpar[j][4] >> theCurrentTemp.enty[i].yflpar[j][5];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 9, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.enty[i].xavg[j] >> theCurrentTemp.enty[i].xrms[j] >> theCurrentTemp.enty[i].xgx0[j] >> theCurrentTemp.enty[i].xgsig[j];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 10, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.enty[i].xflpar[j][0] >> theCurrentTemp.enty[i].xflpar[j][1] >> theCurrentTemp.enty[i].xflpar[j][2]
>> theCurrentTemp.enty[i].xflpar[j][3] >> theCurrentTemp.enty[i].xflpar[j][4] >> theCurrentTemp.enty[i].xflpar[j][5];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 11, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.enty[i].chi2yavg[j] >> theCurrentTemp.enty[i].chi2ymin[j] >> theCurrentTemp.enty[i].chi2xavg[j] >> theCurrentTemp.enty[i].chi2xmin[j];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 12, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.enty[i].yavgc2m[j] >> theCurrentTemp.enty[i].yrmsc2m[j] >> theCurrentTemp.enty[i].ygx0c2m[j] >> theCurrentTemp.enty[i].ygsigc2m[j];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 13, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.enty[i].xavgc2m[j] >> theCurrentTemp.enty[i].xrmsc2m[j] >> theCurrentTemp.enty[i].xgx0c2m[j] >> theCurrentTemp.enty[i].xgsigc2m[j];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 14, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.enty[i].yavggen[j] >> theCurrentTemp.enty[i].yrmsgen[j] >> theCurrentTemp.enty[i].ygx0gen[j] >> theCurrentTemp.enty[i].ygsiggen[j];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 14a, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.enty[i].xavggen[j] >> theCurrentTemp.enty[i].xrmsgen[j] >> theCurrentTemp.enty[i].xgx0gen[j] >> theCurrentTemp.enty[i].xgsiggen[j];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 14b, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
in_file >> theCurrentTemp.enty[i].chi2yavgone >> theCurrentTemp.enty[i].chi2yminone >> theCurrentTemp.enty[i].chi2xavgone >> theCurrentTemp.enty[i].chi2xminone >> theCurrentTemp.enty[i].qmin2
>> theCurrentTemp.enty[i].mpvvav >> theCurrentTemp.enty[i].sigmavav >> theCurrentTemp.enty[i].kappavav >> theCurrentTemp.enty[i].qavg_spare >> theCurrentTemp.enty[i].spare[0];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 15, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
in_file >> theCurrentTemp.enty[i].spare[1] >> theCurrentTemp.enty[i].spare[2] >> theCurrentTemp.enty[i].spare[3] >> theCurrentTemp.enty[i].qbfrac[0] >> theCurrentTemp.enty[i].qbfrac[1]
>> theCurrentTemp.enty[i].qbfrac[2] >> theCurrentTemp.enty[i].fracyone >> theCurrentTemp.enty[i].fracxone >> theCurrentTemp.enty[i].fracytwo >> theCurrentTemp.enty[i].fracxtwo;
// theCurrentTemp.enty[i].qbfrac[3] = 1. - theCurrentTemp.enty[i].qbfrac[0] - theCurrentTemp.enty[i].qbfrac[1] - theCurrentTemp.enty[i].qbfrac[2];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 16, no template load, run # " << theCurrentTemp.enty[i].runnum << ENDL; return false;}
}
// next, loop over all barrel x-angle entries
for (k=0; k < theCurrentTemp.head.NTyx; ++k) {
for (i=0; i < theCurrentTemp.head.NTxx; ++i) {
in_file >> theCurrentTemp.entx[k][i].runnum >> theCurrentTemp.entx[k][i].costrk[0]
>> theCurrentTemp.entx[k][i].costrk[1] >> theCurrentTemp.entx[k][i].costrk[2];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 17, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
// Calculate the alpha, beta, and cot(beta) for this entry
theCurrentTemp.entx[k][i].alpha = static_cast<float>(atan2((double)theCurrentTemp.entx[k][i].costrk[2], (double)theCurrentTemp.entx[k][i].costrk[0]));
theCurrentTemp.entx[k][i].cotalpha = theCurrentTemp.entx[k][i].costrk[0]/theCurrentTemp.entx[k][i].costrk[2];
theCurrentTemp.entx[k][i].beta = static_cast<float>(atan2((double)theCurrentTemp.entx[k][i].costrk[2], (double)theCurrentTemp.entx[k][i].costrk[1]));
theCurrentTemp.entx[k][i].cotbeta = theCurrentTemp.entx[k][i].costrk[1]/theCurrentTemp.entx[k][i].costrk[2];
in_file >> theCurrentTemp.entx[k][i].qavg >> theCurrentTemp.entx[k][i].pixmax >> theCurrentTemp.entx[k][i].symax >> theCurrentTemp.entx[k][i].dyone
>> theCurrentTemp.entx[k][i].syone >> theCurrentTemp.entx[k][i].sxmax >> theCurrentTemp.entx[k][i].dxone >> theCurrentTemp.entx[k][i].sxone;
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 18, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
in_file >> theCurrentTemp.entx[k][i].dytwo >> theCurrentTemp.entx[k][i].sytwo >> theCurrentTemp.entx[k][i].dxtwo
>> theCurrentTemp.entx[k][i].sxtwo >> theCurrentTemp.entx[k][i].qmin >> theCurrentTemp.entx[k][i].clsleny >> theCurrentTemp.entx[k][i].clslenx;
// >> theCurrentTemp.entx[k][i].mpvvav >> theCurrentTemp.entx[k][i].sigmavav >> theCurrentTemp.entx[k][i].kappavav;
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 19, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
for (j=0; j<2; ++j) {
in_file >> theCurrentTemp.entx[k][i].ypar[j][0] >> theCurrentTemp.entx[k][i].ypar[j][1]
>> theCurrentTemp.entx[k][i].ypar[j][2] >> theCurrentTemp.entx[k][i].ypar[j][3] >> theCurrentTemp.entx[k][i].ypar[j][4];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 20, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<9; ++j) {
for (l=0; l<TYSIZE; ++l) {in_file >> theCurrentTemp.entx[k][i].ytemp[j][l];}
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 21, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<2; ++j) {
in_file >> theCurrentTemp.entx[k][i].xpar[j][0] >> theCurrentTemp.entx[k][i].xpar[j][1]
>> theCurrentTemp.entx[k][i].xpar[j][2] >> theCurrentTemp.entx[k][i].xpar[j][3] >> theCurrentTemp.entx[k][i].xpar[j][4];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 22, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
qavg_avg = 0.;
for (j=0; j<9; ++j) {
for (l=0; l<TXSIZE; ++l) {in_file >> theCurrentTemp.entx[k][i].xtemp[j][l]; qavg_avg += theCurrentTemp.entx[k][i].xtemp[j][l];}
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 23, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
theCurrentTemp.entx[k][i].qavg_avg = qavg_avg/9.;
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.entx[k][i].yavg[j] >> theCurrentTemp.entx[k][i].yrms[j] >> theCurrentTemp.entx[k][i].ygx0[j] >> theCurrentTemp.entx[k][i].ygsig[j];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 24, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.entx[k][i].yflpar[j][0] >> theCurrentTemp.entx[k][i].yflpar[j][1] >> theCurrentTemp.entx[k][i].yflpar[j][2]
>> theCurrentTemp.entx[k][i].yflpar[j][3] >> theCurrentTemp.entx[k][i].yflpar[j][4] >> theCurrentTemp.entx[k][i].yflpar[j][5];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 25, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.entx[k][i].xavg[j] >> theCurrentTemp.entx[k][i].xrms[j] >> theCurrentTemp.entx[k][i].xgx0[j] >> theCurrentTemp.entx[k][i].xgsig[j];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 26, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.entx[k][i].xflpar[j][0] >> theCurrentTemp.entx[k][i].xflpar[j][1] >> theCurrentTemp.entx[k][i].xflpar[j][2]
>> theCurrentTemp.entx[k][i].xflpar[j][3] >> theCurrentTemp.entx[k][i].xflpar[j][4] >> theCurrentTemp.entx[k][i].xflpar[j][5];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 27, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.entx[k][i].chi2yavg[j] >> theCurrentTemp.entx[k][i].chi2ymin[j] >> theCurrentTemp.entx[k][i].chi2xavg[j] >> theCurrentTemp.entx[k][i].chi2xmin[j];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 28, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.entx[k][i].yavgc2m[j] >> theCurrentTemp.entx[k][i].yrmsc2m[j] >> theCurrentTemp.entx[k][i].ygx0c2m[j] >> theCurrentTemp.entx[k][i].ygsigc2m[j];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 29, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.entx[k][i].xavgc2m[j] >> theCurrentTemp.entx[k][i].xrmsc2m[j] >> theCurrentTemp.entx[k][i].xgx0c2m[j] >> theCurrentTemp.entx[k][i].xgsigc2m[j];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 30, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.entx[k][i].yavggen[j] >> theCurrentTemp.entx[k][i].yrmsgen[j] >> theCurrentTemp.entx[k][i].ygx0gen[j] >> theCurrentTemp.entx[k][i].ygsiggen[j];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 30a, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
for (j=0; j<4; ++j) {
in_file >> theCurrentTemp.entx[k][i].xavggen[j] >> theCurrentTemp.entx[k][i].xrmsgen[j] >> theCurrentTemp.entx[k][i].xgx0gen[j] >> theCurrentTemp.entx[k][i].xgsiggen[j];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 30b, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
in_file >> theCurrentTemp.entx[k][i].chi2yavgone >> theCurrentTemp.entx[k][i].chi2yminone >> theCurrentTemp.entx[k][i].chi2xavgone >> theCurrentTemp.entx[k][i].chi2xminone >> theCurrentTemp.entx[k][i].qmin2
>> theCurrentTemp.entx[k][i].mpvvav >> theCurrentTemp.entx[k][i].sigmavav >> theCurrentTemp.entx[k][i].kappavav >> theCurrentTemp.entx[k][i].qavg_spare >> theCurrentTemp.entx[k][i].spare[0];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 31, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
in_file >> theCurrentTemp.entx[k][i].spare[1] >> theCurrentTemp.entx[k][i].spare[2] >> theCurrentTemp.entx[k][i].spare[3] >> theCurrentTemp.entx[k][i].qbfrac[0] >> theCurrentTemp.entx[k][i].qbfrac[1]
>> theCurrentTemp.entx[k][i].qbfrac[2] >> theCurrentTemp.entx[k][i].fracyone >> theCurrentTemp.entx[k][i].fracxone >> theCurrentTemp.entx[k][i].fracytwo >> theCurrentTemp.entx[k][i].fracxtwo;
// theCurrentTemp.entx[k][i].qbfrac[3] = 1. - theCurrentTemp.entx[k][i].qbfrac[0] - theCurrentTemp.entx[k][i].qbfrac[1] - theCurrentTemp.entx[k][i].qbfrac[2];
if(in_file.fail()) {LOGERROR("SiPixelTemplate") << "Error reading file 32, no template load, run # " << theCurrentTemp.entx[k][i].runnum << ENDL; return false;}
}
}
in_file.close();
// Add this template to the store
thePixelTemp.push_back(theCurrentTemp);
return true;
} else {
// If file didn't open, report this
LOGERROR("SiPixelTemplate") << "Error opening File" << tempfile << ENDL;
return false;
}
} // TempInit
| float SiPixelTemplate::qavg | ( | ) | [inline] |
average cluster charge for this set of track angles
Definition at line 271 of file SiPixelTemplate.h.
References pqavg.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| int SiPixelTemplate::qbin | ( | int | id, |
| float | cotbeta, | ||
| float | qclus | ||
| ) |
Interpolate beta/alpha angles to produce an expected average charge. Return int (0-4) describing the charge of the cluster [0: 1.5<Q/Qavg, 1: 1<Q/Qavg<1.5, 2: 0.85<Q/Qavg<1, 3: 0.95Qmin<Q<0.85Qavg, 4: Q<0.95Qmin].
| id | - (input) index of the template to use |
| cotbeta | - (input) the cotangent of the beta track angle (see CMS IN 2004/014) |
| qclus | - (input) the cluster charge in electrons |
Definition at line 2275 of file SiPixelTemplate.cc.
References qbin().
{
// Interpolate for a new set of track angles
// Local variables
float pixmx, sigmay, deltay, sigmax, deltax, sy1, dy1, sy2, dy2, sx1, dx1, sx2, dx2, locBz, lorywidth, lorxwidth;
const float cotalpha = 0.;
locBz = -1.;
if(cotbeta < 0.) {locBz = -locBz;}
return SiPixelTemplate::qbin(id, cotalpha, cotbeta, locBz, qclus, pixmx, sigmay, deltay, sigmax, deltax,
sy1, dy1, sy2, dy2, sx1, dx1, sx2, dx2, lorywidth, lorxwidth);
} // qbin
| int SiPixelTemplate::qbin | ( | int | id, |
| float | cotalpha, | ||
| float | cotbeta, | ||
| float | locBz, | ||
| float | qclus, | ||
| float & | pixmx, | ||
| float & | sigmay, | ||
| float & | deltay, | ||
| float & | sigmax, | ||
| float & | deltax, | ||
| float & | sy1, | ||
| float & | dy1, | ||
| float & | sy2, | ||
| float & | dy2, | ||
| float & | sx1, | ||
| float & | dx1, | ||
| float & | sx2, | ||
| float & | dx2, | ||
| float & | lorywidth, | ||
| float & | lorxwidth | ||
| ) |
Interpolate beta/alpha angles to produce an expected average charge. Return int (0-4) describing the charge of the cluster [0: 1.5<Q/Qavg, 1: 1<Q/Qavg<1.5, 2: 0.85<Q/Qavg<1, 3: 0.95Qmin<Q<0.85Qavg, 4: Q<0.95Qmin].
| id | - (input) index of the template to use |
| cotalpha | - (input) the cotangent of the alpha track angle (see CMS IN 2004/014) |
| cotbeta | - (input) the cotangent of the beta track angle (see CMS IN 2004/014) |
| locBz | - (input) the sign of this quantity is used to determine whether to flip cot(beta)<0 quantities from cot(beta)>0 (FPix only) for FPix IP-related tracks, locBz < 0 for cot(beta) > 0 and locBz > 0 for cot(beta) < 0 |
| qclus | - (input) the cluster charge in electrons |
| pixmax | - (output) the maximum pixel charge in electrons (truncation value) |
| sigmay | - (output) the estimated y-error for CPEGeneric in microns |
| deltay | - (output) the estimated y-bias for CPEGeneric in microns |
| sigmax | - (output) the estimated x-error for CPEGeneric in microns |
| deltax | - (output) the estimated x-bias for CPEGeneric in microns |
| sy1 | - (output) the estimated y-error for 1 single-pixel clusters in microns |
| dy1 | - (output) the estimated y-bias for 1 single-pixel clusters in microns |
| sy2 | - (output) the estimated y-error for 1 double-pixel clusters in microns |
| dy2 | - (output) the estimated y-bias for 1 double-pixel clusters in microns |
| sx1 | - (output) the estimated x-error for 1 single-pixel clusters in microns |
| dx1 | - (output) the estimated x-bias for 1 single-pixel clusters in microns |
| sx2 | - (output) the estimated x-error for 1 double-pixel clusters in microns |
| dx2 | - (output) the estimated x-bias for 1 double-pixel clusters in microns |
| lorywidth | - (output) the estimated y Lorentz width |
| lorxwidth | - (output) the estimated x Lorentz width |
Definition at line 1984 of file SiPixelTemplate.cc.
References Exception, i, getHLTprescales::index, and mathSSE::sqrt().
Referenced by PixelCPEGeneric::localPosition(), and qbin().
{
// Interpolate for a new set of track angles
// Local variables
int i, binq;
int ilow, ihigh, iylow, iyhigh, Ny, Nxx, Nyx, imidy, imaxx, index;
float yratio, yxratio, xxratio;
float acotb, qscale, qavg, qmin, qmin2, fq, qtotal, qcorrect, cotb, cotalpha0;
float yavggen[4], yrmsgen[4], xavggen[4], xrmsgen[4];
bool flip_y;
// Find the index corresponding to id
index = -1;
for(i=0; i<(int)thePixelTemp.size(); ++i) {
if(id == thePixelTemp[i].head.ID) {
index = i;
break;
}
}
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(index < 0 || index >= (int)thePixelTemp.size()) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::qbin can't find needed template ID = " << id << std::endl;
}
#else
assert(index >= 0 && index < (int)thePixelTemp.size());
#endif
//
// Interpolate the absolute value of cot(beta)
acotb = fabs((double)cotbeta);
// qcorrect corrects the cot(alpha)=0 cluster charge for non-zero cot(alpha)
// qcorrect corrects the cot(alpha)=0 cluster charge for non-zero cot(alpha)
cotalpha0 = thePixelTemp[index].enty[0].cotalpha;
qcorrect=(float)sqrt((double)((1.+cotbeta*cotbeta+cotalpha*cotalpha)/(1.+cotbeta*cotbeta+cotalpha0*cotalpha0)));
// for some cosmics, the ususal gymnastics are incorrect
if(thePixelTemp[index].head.Dtype == 0) {
cotb = acotb;
flip_y = false;
if(cotbeta < 0.) {flip_y = true;}
} else {
if(locBz < 0.) {
cotb = cotbeta;
flip_y = false;
} else {
cotb = -cotbeta;
flip_y = true;
}
}
// Copy the charge scaling factor to the private variable
qscale = thePixelTemp[index].head.qscale;
Ny = thePixelTemp[index].head.NTy;
Nyx = thePixelTemp[index].head.NTyx;
Nxx = thePixelTemp[index].head.NTxx;
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(Ny < 2 || Nyx < 1 || Nxx < 2) {
throw cms::Exception("DataCorrupt") << "template ID = " << id_current << "has too few entries: Ny/Nyx/Nxx = " << Ny << "/" << Nyx << "/" << Nxx << std::endl;
}
#else
assert(Ny > 1 && Nyx > 0 && Nxx > 1);
#endif
imaxx = Nyx - 1;
imidy = Nxx/2;
// next, loop over all y-angle entries
ilow = 0;
yratio = 0.;
if(cotb >= thePixelTemp[index].enty[Ny-1].cotbeta) {
ilow = Ny-2;
yratio = 1.;
} else {
if(cotb >= thePixelTemp[index].enty[0].cotbeta) {
for (i=0; i<Ny-1; ++i) {
if( thePixelTemp[index].enty[i].cotbeta <= cotb && cotb < thePixelTemp[index].enty[i+1].cotbeta) {
ilow = i;
yratio = (cotb - thePixelTemp[index].enty[i].cotbeta)/(thePixelTemp[index].enty[i+1].cotbeta - thePixelTemp[index].enty[i].cotbeta);
break;
}
}
}
}
ihigh=ilow + 1;
// Interpolate/store all y-related quantities (flip displacements when flip_y)
qavg = (1. - yratio)*thePixelTemp[index].enty[ilow].qavg + yratio*thePixelTemp[index].enty[ihigh].qavg;
qavg *= qcorrect;
dy1 = (1. - yratio)*thePixelTemp[index].enty[ilow].dyone + yratio*thePixelTemp[index].enty[ihigh].dyone;
if(flip_y) {dy1 = -dy1;}
sy1 = (1. - yratio)*thePixelTemp[index].enty[ilow].syone + yratio*thePixelTemp[index].enty[ihigh].syone;
dy2 = (1. - yratio)*thePixelTemp[index].enty[ilow].dytwo + yratio*thePixelTemp[index].enty[ihigh].dytwo;
if(flip_y) {dy2 = -dy2;}
sy2 = (1. - yratio)*thePixelTemp[index].enty[ilow].sytwo + yratio*thePixelTemp[index].enty[ihigh].sytwo;
qmin = (1. - yratio)*thePixelTemp[index].enty[ilow].qmin + yratio*thePixelTemp[index].enty[ihigh].qmin;
qmin *= qcorrect;
qmin2 = (1. - yratio)*thePixelTemp[index].enty[ilow].qmin2 + yratio*thePixelTemp[index].enty[ihigh].qmin2;
qmin2 *= qcorrect;
for(i=0; i<4; ++i) {
yavggen[i]=(1. - yratio)*thePixelTemp[index].enty[ilow].yavggen[i] + yratio*thePixelTemp[index].enty[ihigh].yavggen[i];
if(flip_y) {yavggen[i] = -yavggen[i];}
yrmsgen[i]=(1. - yratio)*thePixelTemp[index].enty[ilow].yrmsgen[i] + yratio*thePixelTemp[index].enty[ihigh].yrmsgen[i];
}
// next, loop over all x-angle entries, first, find relevant y-slices
iylow = 0;
yxratio = 0.;
if(acotb >= thePixelTemp[index].entx[Nyx-1][0].cotbeta) {
iylow = Nyx-2;
yxratio = 1.;
} else if(acotb >= thePixelTemp[index].entx[0][0].cotbeta) {
for (i=0; i<Nyx-1; ++i) {
if( thePixelTemp[index].entx[i][0].cotbeta <= acotb && acotb < thePixelTemp[index].entx[i+1][0].cotbeta) {
iylow = i;
yxratio = (acotb - thePixelTemp[index].entx[i][0].cotbeta)/(thePixelTemp[index].entx[i+1][0].cotbeta - thePixelTemp[index].entx[i][0].cotbeta);
break;
}
}
}
iyhigh=iylow + 1;
ilow = 0;
xxratio = 0.;
if(cotalpha >= thePixelTemp[index].entx[0][Nxx-1].cotalpha) {
ilow = Nxx-2;
xxratio = 1.;
} else {
if(cotalpha >= thePixelTemp[index].entx[0][0].cotalpha) {
for (i=0; i<Nxx-1; ++i) {
if( thePixelTemp[index].entx[0][i].cotalpha <= cotalpha && cotalpha < thePixelTemp[index].entx[0][i+1].cotalpha) {
ilow = i;
xxratio = (cotalpha - thePixelTemp[index].entx[0][i].cotalpha)/(thePixelTemp[index].entx[0][i+1].cotalpha - thePixelTemp[index].entx[0][i].cotalpha);
break;
}
}
}
}
ihigh=ilow + 1;
dx1 = (1. - xxratio)*thePixelTemp[index].entx[0][ilow].dxone + xxratio*thePixelTemp[index].entx[0][ihigh].dxone;
sx1 = (1. - xxratio)*thePixelTemp[index].entx[0][ilow].sxone + xxratio*thePixelTemp[index].entx[0][ihigh].sxone;
dx2 = (1. - xxratio)*thePixelTemp[index].entx[0][ilow].dxtwo + xxratio*thePixelTemp[index].entx[0][ihigh].dxtwo;
sx2 = (1. - xxratio)*thePixelTemp[index].entx[0][ilow].sxtwo + xxratio*thePixelTemp[index].entx[0][ihigh].sxtwo;
// pixmax is the maximum allowed pixel charge (used for truncation)
pixmx=(1. - yxratio)*((1. - xxratio)*thePixelTemp[index].entx[iylow][ilow].pixmax + xxratio*thePixelTemp[index].entx[iylow][ihigh].pixmax)
+yxratio*((1. - xxratio)*thePixelTemp[index].entx[iyhigh][ilow].pixmax + xxratio*thePixelTemp[index].entx[iyhigh][ihigh].pixmax);
for(i=0; i<4; ++i) {
xavggen[i]=(1. - yxratio)*((1. - xxratio)*thePixelTemp[index].entx[iylow][ilow].xavggen[i] + xxratio*thePixelTemp[index].entx[iylow][ihigh].xavggen[i])
+yxratio*((1. - xxratio)*thePixelTemp[index].entx[iyhigh][ilow].xavggen[i] + xxratio*thePixelTemp[index].entx[iyhigh][ihigh].xavggen[i]);
xrmsgen[i]=(1. - yxratio)*((1. - xxratio)*thePixelTemp[index].entx[iylow][ilow].xrmsgen[i] + xxratio*thePixelTemp[index].entx[iylow][ihigh].xrmsgen[i])
+yxratio*((1. - xxratio)*thePixelTemp[index].entx[iyhigh][ilow].xrmsgen[i] + xxratio*thePixelTemp[index].entx[iyhigh][ihigh].xrmsgen[i]);
}
lorywidth = thePixelTemp[index].head.lorywidth;
if(locBz > 0.) {lorywidth = -lorywidth;}
lorxwidth = thePixelTemp[index].head.lorxwidth;
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(qavg <= 0. || qmin <= 0.) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::qbin, qavg or qmin <= 0,"
<< " Probably someone called the generic pixel reconstruction with an illegal trajectory state" << std::endl;
}
#else
assert(qavg > 0. && qmin > 0.);
#endif
// Scale the input charge to account for differences between pixelav and CMSSW simulation or data
qtotal = qscale*qclus;
// uncertainty and final corrections depend upon total charge bin
fq = qtotal/qavg;
if(fq > 1.5) {
binq=0;
} else {
if(fq > 1.0) {
binq=1;
} else {
if(fq > 0.85) {
binq=2;
} else {
binq=3;
}
}
}
// Take the errors and bias from the correct charge bin
sigmay = yrmsgen[binq]; deltay = yavggen[binq];
sigmax = xrmsgen[binq]; deltax = xavggen[binq];
// If the charge is too small (then flag it)
if(qtotal < 0.95*qmin) {binq = 5;} else {if(qtotal < 0.95*qmin2) {binq = 4;}}
return binq;
} // qbin
| int SiPixelTemplate::qbin | ( | int | id, |
| float | cotalpha, | ||
| float | cotbeta, | ||
| float | locBz, | ||
| float | qclus, | ||
| float & | pixmx, | ||
| float & | sigmay, | ||
| float & | deltay, | ||
| float & | sigmax, | ||
| float & | deltax, | ||
| float & | sy1, | ||
| float & | dy1, | ||
| float & | sy2, | ||
| float & | dy2, | ||
| float & | sx1, | ||
| float & | dx1, | ||
| float & | sx2, | ||
| float & | dx2 | ||
| ) |
Interpolate beta/alpha angles to produce an expected average charge. Return int (0-4) describing the charge of the cluster [0: 1.5<Q/Qavg, 1: 1<Q/Qavg<1.5, 2: 0.85<Q/Qavg<1, 3: 0.95Qmin<Q<0.85Qavg, 4: Q<0.95Qmin].
| id | - (input) index of the template to use |
| cotalpha | - (input) the cotangent of the alpha track angle (see CMS IN 2004/014) |
| cotbeta | - (input) the cotangent of the beta track angle (see CMS IN 2004/014) |
| locBz | - (input) the sign of this quantity is used to determine whether to flip cot(beta)<0 quantities from cot(beta)>0 (FPix only) for FPix IP-related tracks, locBz < 0 for cot(beta) > 0 and locBz > 0 for cot(beta) < 0 |
| qclus | - (input) the cluster charge in electrons |
| pixmax | - (output) the maximum pixel charge in electrons (truncation value) |
| sigmay | - (output) the estimated y-error for CPEGeneric in microns |
| deltay | - (output) the estimated y-bias for CPEGeneric in microns |
| sigmax | - (output) the estimated x-error for CPEGeneric in microns |
| deltax | - (output) the estimated x-bias for CPEGeneric in microns |
| sy1 | - (output) the estimated y-error for 1 single-pixel clusters in microns |
| dy1 | - (output) the estimated y-bias for 1 single-pixel clusters in microns |
| sy2 | - (output) the estimated y-error for 1 double-pixel clusters in microns |
| dy2 | - (output) the estimated y-bias for 1 double-pixel clusters in microns |
| sx1 | - (output) the estimated x-error for 1 single-pixel clusters in microns |
| dx1 | - (output) the estimated x-bias for 1 single-pixel clusters in microns |
| sx2 | - (output) the estimated x-error for 1 double-pixel clusters in microns |
| dx2 | - (output) the estimated x-bias for 1 double-pixel clusters in microns |
Definition at line 2258 of file SiPixelTemplate.cc.
References qbin().
{
float lorywidth, lorxwidth;
return SiPixelTemplate::qbin(id, cotalpha, cotbeta, locBz, qclus, pixmx, sigmay, deltay, sigmax, deltax,
sy1, dy1, sy2, dy2, sx1, dx1, sx2, dx2, lorywidth, lorxwidth);
} // qbin
| void SiPixelTemplate::qbin_dist | ( | int | id, |
| float | cotalpha, | ||
| float | cotbeta, | ||
| float | qbin_frac[4], | ||
| float & | ny1_frac, | ||
| float & | ny2_frac, | ||
| float & | nx1_frac, | ||
| float & | nx2_frac | ||
| ) |
Interpolate beta/alpha angles to produce estimated errors for fastsim
| id | - (input) index of the template to use |
| cotalpha | - (input) the cotangent of the alpha track angle (see CMS IN 2004/014) |
| cotbeta | - (input) the cotangent of the beta track angle (see CMS IN 2004/014) |
| qbin_frac[4] | - (output) the integrated probability for qbin=0, 0+1, 0+1+2, 0+1+2+3 (1.) |
| ny1_frac | - (output) the probability for ysize = 1 for a single-size pixel |
| ny2_frac | - (output) the probability for ysize = 1 for a double-size pixel |
| nx1_frac | - (output) the probability for xsize = 1 for a single-size pixel |
| nx2_frac | - (output) the probability for xsize = 1 for a double-size pixel |
Definition at line 2505 of file SiPixelTemplate.cc.
References Exception, i, and getHLTprescales::index.
Referenced by SiPixelGaussianSmearingRecHitConverterAlgorithm::smearHit().
{
// Interpolate for a new set of track angles
// Local variables
int i;
int ilow, ihigh, iylow, iyhigh, Ny, Nxx, Nyx, imidy, imaxx, index;
float yratio, yxratio, xxratio;
float acotb, cotb;
float qfrac[4];
bool flip_y;
// Find the index corresponding to id
index = -1;
for(i=0; i<(int)thePixelTemp.size(); ++i) {
if(id == thePixelTemp[i].head.ID) {
index = i;
// id_current = id;
break;
}
}
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(index < 0 || index >= (int)thePixelTemp.size()) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::temperrors can't find needed template ID = " << id << std::endl;
}
#else
assert(index >= 0 && index < (int)thePixelTemp.size());
#endif
//
// Interpolate the absolute value of cot(beta)
acotb = fabs((double)cotbeta);
cotb = cotbeta;
// for some cosmics, the ususal gymnastics are incorrect
// if(thePixelTemp[index].head.Dtype == 0) {
cotb = acotb;
flip_y = false;
if(cotbeta < 0.) {flip_y = true;}
// } else {
// if(locBz < 0.) {
// cotb = cotbeta;
// flip_y = false;
// } else {
// cotb = -cotbeta;
// flip_y = true;
// }
// }
// Copy the charge scaling factor to the private variable
Ny = thePixelTemp[index].head.NTy;
Nyx = thePixelTemp[index].head.NTyx;
Nxx = thePixelTemp[index].head.NTxx;
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(Ny < 2 || Nyx < 1 || Nxx < 2) {
throw cms::Exception("DataCorrupt") << "template ID = " << id_current << "has too few entries: Ny/Nyx/Nxx = " << Ny << "/" << Nyx << "/" << Nxx << std::endl;
}
#else
assert(Ny > 1 && Nyx > 0 && Nxx > 1);
#endif
imaxx = Nyx - 1;
imidy = Nxx/2;
// next, loop over all y-angle entries
ilow = 0;
yratio = 0.;
if(cotb >= thePixelTemp[index].enty[Ny-1].cotbeta) {
ilow = Ny-2;
yratio = 1.;
} else {
if(cotb >= thePixelTemp[index].enty[0].cotbeta) {
for (i=0; i<Ny-1; ++i) {
if( thePixelTemp[index].enty[i].cotbeta <= cotb && cotb < thePixelTemp[index].enty[i+1].cotbeta) {
ilow = i;
yratio = (cotb - thePixelTemp[index].enty[i].cotbeta)/(thePixelTemp[index].enty[i+1].cotbeta - thePixelTemp[index].enty[i].cotbeta);
break;
}
}
}
}
ihigh=ilow + 1;
// Interpolate/store all y-related quantities (flip displacements when flip_y)
ny1_frac = (1. - yratio)*thePixelTemp[index].enty[ilow].fracyone + yratio*thePixelTemp[index].enty[ihigh].fracyone;
ny2_frac = (1. - yratio)*thePixelTemp[index].enty[ilow].fracytwo + yratio*thePixelTemp[index].enty[ihigh].fracytwo;
// next, loop over all x-angle entries, first, find relevant y-slices
iylow = 0;
yxratio = 0.;
if(acotb >= thePixelTemp[index].entx[Nyx-1][0].cotbeta) {
iylow = Nyx-2;
yxratio = 1.;
} else if(acotb >= thePixelTemp[index].entx[0][0].cotbeta) {
for (i=0; i<Nyx-1; ++i) {
if( thePixelTemp[index].entx[i][0].cotbeta <= acotb && acotb < thePixelTemp[index].entx[i+1][0].cotbeta) {
iylow = i;
yxratio = (acotb - thePixelTemp[index].entx[i][0].cotbeta)/(thePixelTemp[index].entx[i+1][0].cotbeta - thePixelTemp[index].entx[i][0].cotbeta);
break;
}
}
}
iyhigh=iylow + 1;
ilow = 0;
xxratio = 0.;
if(cotalpha >= thePixelTemp[index].entx[0][Nxx-1].cotalpha) {
ilow = Nxx-2;
xxratio = 1.;
} else {
if(cotalpha >= thePixelTemp[index].entx[0][0].cotalpha) {
for (i=0; i<Nxx-1; ++i) {
if( thePixelTemp[index].entx[0][i].cotalpha <= cotalpha && cotalpha < thePixelTemp[index].entx[0][i+1].cotalpha) {
ilow = i;
xxratio = (cotalpha - thePixelTemp[index].entx[0][i].cotalpha)/(thePixelTemp[index].entx[0][i+1].cotalpha - thePixelTemp[index].entx[0][i].cotalpha);
break;
}
}
}
}
ihigh=ilow + 1;
for(i=0; i<3; ++i) {
qfrac[i]=(1. - yxratio)*((1. - xxratio)*thePixelTemp[index].entx[iylow][ilow].qbfrac[i] + xxratio*thePixelTemp[index].entx[iylow][ihigh].qbfrac[i])
+yxratio*((1. - xxratio)*thePixelTemp[index].entx[iyhigh][ilow].qbfrac[i] + xxratio*thePixelTemp[index].entx[iyhigh][ihigh].qbfrac[i]);
}
nx1_frac = (1. - yxratio)*((1. - xxratio)*thePixelTemp[index].entx[iylow][ilow].fracxone + xxratio*thePixelTemp[index].entx[iylow][ihigh].fracxone)
+yxratio*((1. - xxratio)*thePixelTemp[index].entx[iyhigh][ilow].fracxone + xxratio*thePixelTemp[index].entx[iyhigh][ihigh].fracxone);
nx2_frac = (1. - yxratio)*((1. - xxratio)*thePixelTemp[index].entx[iylow][ilow].fracxtwo + xxratio*thePixelTemp[index].entx[iylow][ihigh].fracxtwo)
+yxratio*((1. - xxratio)*thePixelTemp[index].entx[iyhigh][ilow].fracxtwo + xxratio*thePixelTemp[index].entx[iyhigh][ihigh].fracxtwo);
qbin_frac[0] = qfrac[0];
qbin_frac[1] = qbin_frac[0] + qfrac[1];
qbin_frac[2] = qbin_frac[1] + qfrac[2];
qbin_frac[3] = 1.;
return;
} // qbin
| float SiPixelTemplate::qmin | ( | ) | [inline] |
minimum cluster charge for valid hit (keeps 99.9% of simulated hits)
Definition at line 285 of file SiPixelTemplate.h.
References pqmin.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::qmin | ( | int | i | ) | [inline] |
minimum cluster charge for valid hit (keeps 99.9% or 99.8% of simulated hits)
Definition at line 286 of file SiPixelTemplate.h.
| float SiPixelTemplate::qscale | ( | ) | [inline] |
charge scaling factor
Definition at line 273 of file SiPixelTemplate.h.
References pqscale.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::s50 | ( | ) | [inline] |
1/2 of the pixel threshold signal in electrons
Definition at line 274 of file SiPixelTemplate.h.
References ps50.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), SiPixelTemplateReco::PixelTempSplit(), and SiPixelGaussianSmearingRecHitConverterAlgorithm::smearHit().
| float SiPixelTemplate::sigmavav | ( | ) | [inline] |
"sigma" scale fctor for Vavilov distribution
Definition at line 445 of file SiPixelTemplate.h.
References psigmavav.
| bool SiPixelTemplate::simpletemplate2D | ( | float | xhit, |
| float | yhit, | ||
| std::vector< bool > & | ydouble, | ||
| std::vector< bool > & | xdouble, | ||
| float | template2d[BXM2][BYM2] | ||
| ) |
Make simple 2-D templates from track angles set in interpolate and hit position.
| xhit | - (input) x-position of hit relative to the lower left corner of pixel[1][1] (to allow for the "padding" of the two-d clusters in the splitter) |
| yhit | - (input) y-position of hit relative to the lower left corner of pixel[1][1] |
| ydouble | - (input) STL vector of 21 element array to flag a double-pixel starting at cluster[1][1] |
| xdouble | - (input) STL vector of 11 element array to flag a double-pixel starting at cluster[1][1] |
| template2d | - (output) 2d template of size matched to the cluster. Input must be zeroed since charge is added only. |
Definition at line 2691 of file SiPixelTemplate.cc.
References abs, any, SimplePixel::btype, BXM3, BYM3, SimplePixel::i, i, SimplePixel::j, j, list(), edm::max(), SimplePixel::s, mathSSE::sqrt(), SimplePixel::x, and SimplePixel::y.
{
// Local variables
float x0, y0, xf, yf, xi, yi, sf, si, s0, qpix, slopey, slopex, ds;
int i, j, jpix0, ipix0, jpixf, ipixf, jpix, ipix, nx, ny, anx, any, jmax, imax;
float qtotal;
// double path;
std::list<SimplePixel> list;
std::list<SimplePixel>::iterator listIter, listEnd;
// Calculate the entry and exit points for the line charge from the track
x0 = xhit - 0.5*pzsize*cota_current;
y0 = yhit - 0.5*pzsize*cotb_current;
jpix0 = floor(x0/pxsize)+1;
ipix0 = floor(y0/pysize)+1;
if(jpix0 < 0 || jpix0 > BXM3) {return false;}
if(ipix0 < 0 || ipix0 > BYM3) {return false;}
xf = xhit + 0.5*pzsize*cota_current + plorxwidth;
yf = yhit + 0.5*pzsize*cotb_current + plorywidth;
jpixf = floor(xf/pxsize)+1;
ipixf = floor(yf/pysize)+1;
if(jpixf < 0 || jpixf > BXM3) {return false;}
if(ipixf < 0 || ipixf > BYM3) {return false;}
// total charge length
sf = sqrt((xf-x0)*(xf-x0) + (yf-y0)*(yf-y0));
if((xf-x0) != 0.) {slopey = (yf-y0)/(xf-x0);} else { slopey = 1.e10;}
if((yf-y0) != 0.) {slopex = (xf-x0)/(yf-y0);} else { slopex = 1.e10;}
// use average charge in this direction
qtotal = pqavg_avg;
SimplePixel element;
element.s = sf;
element.x = xf;
element.y = yf;
element.i = ipixf;
element.j = jpixf;
element.btype = 0;
list.push_back(element);
// nx is the number of x interfaces crossed by the line charge
nx = jpixf - jpix0;
anx = abs(nx);
if(anx > 0) {
if(nx > 0) {
for(j=jpix0; j<jpixf; ++j) {
xi = pxsize*j;
yi = slopey*(xi-x0) + y0;
ipix = (int)(yi/pysize)+1;
si = sqrt((xi-x0)*(xi-x0) + (yi-y0)*(yi-y0));
element.s = si;
element.x = xi;
element.y = yi;
element.i = ipix;
element.j = j;
element.btype = 1;
list.push_back(element);
}
} else {
for(j=jpix0; j>jpixf; --j) {
xi = pxsize*(j-1);
yi = slopey*(xi-x0) + y0;
ipix = (int)(yi/pysize)+1;
si = sqrt((xi-x0)*(xi-x0) + (yi-y0)*(yi-y0));
element.s = si;
element.x = xi;
element.y = yi;
element.i = ipix;
element.j = j;
element.btype = 1;
list.push_back(element);
}
}
}
ny = ipixf - ipix0;
any = abs(ny);
if(any > 0) {
if(ny > 0) {
for(i=ipix0; i<ipixf; ++i) {
yi = pysize*i;
xi = slopex*(yi-y0) + x0;
jpix = (int)(xi/pxsize)+1;
si = sqrt((xi-x0)*(xi-x0) + (yi-y0)*(yi-y0));
element.s = si;
element.x = xi;
element.y = yi;
element.i = i;
element.j = jpix;
element.btype = 2;
list.push_back(element);
}
} else {
for(i=ipix0; i>ipixf; --i) {
yi = pysize*(i-1);
xi = slopex*(yi-y0) + x0;
jpix = (int)(xi/pxsize)+1;
si = sqrt((xi-x0)*(xi-x0) + (yi-y0)*(yi-y0));
element.s = si;
element.x = xi;
element.y = yi;
element.i = i;
element.j = jpix;
element.btype = 2;
list.push_back(element);
}
}
}
imax = std::max(ipix0, ipixf);
jmax = std::max(jpix0, jpixf);
// Sort the list according to the distance from the initial point
list.sort();
// Look for double pixels and adjust the list appropriately
for(i=1; i<imax; ++i) {
if(ydouble[i-1]) {
listIter = list.begin();
if(ny > 0) {
while(listIter != list.end()) {
if(listIter->i == i && listIter->btype == 2) {
listIter = list.erase(listIter);
continue;
}
if(listIter->i > i) {
--(listIter->i);
}
++listIter;
}
} else {
while(listIter != list.end()) {
if(listIter->i == i+1 && listIter->btype == 2) {
listIter = list.erase(listIter);
continue;
}
if(listIter->i > i+1) {
--(listIter->i);
}
++listIter;
}
}
}
}
for(j=1; j<jmax; ++j) {
if(xdouble[j-1]) {
listIter = list.begin();
if(nx > 0) {
while(listIter != list.end()) {
if(listIter->j == j && listIter->btype == 1) {
listIter = list.erase(listIter);
continue;
}
if(listIter->j > j) {
--(listIter->j);
}
++listIter;
}
} else {
while(listIter != list.end()) {
if(listIter->j == j+1 && listIter->btype == 1) {
listIter = list.erase(listIter);
continue;
}
if(listIter->j > j+1) {
--(listIter->j);
}
++listIter;
}
}
}
}
// The list now contains the path lengths of the line charge in each pixel from (x0,y0). Cacluate the lengths of the segments and the charge.
s0 = 0.;
listIter = list.begin();
listEnd = list.end();
for( ;listIter != listEnd; ++listIter) {
si = listIter->s;
ds = si - s0;
s0 = si;
j = listIter->j;
i = listIter->i;
if(sf > 0.) { qpix = qtotal*ds/sf;} else {qpix = qtotal;}
template2d[j][i] += qpix;
}
return true;
} // simpletemplate2D
| float SiPixelTemplate::sxmax | ( | ) | [inline] |
average pixel signal for x-projection of cluster
Definition at line 280 of file SiPixelTemplate.h.
References psxmax.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::sxone | ( | ) | [inline] |
rms for one pixel x-clusters
Definition at line 282 of file SiPixelTemplate.h.
References psxone.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::sxtwo | ( | ) | [inline] |
rms for one double-pixel x-clusters
Definition at line 284 of file SiPixelTemplate.h.
References psxtwo.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::symax | ( | ) | [inline] |
average pixel signal for y-projection of cluster
Definition at line 275 of file SiPixelTemplate.h.
References psymax.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::syone | ( | ) | [inline] |
rms for one pixel y-clusters
Definition at line 277 of file SiPixelTemplate.h.
References psyone.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::sytwo | ( | ) | [inline] |
rms for one double-pixel y-clusters
Definition at line 279 of file SiPixelTemplate.h.
References psytwo.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| void SiPixelTemplate::temperrors | ( | int | id, |
| float | cotalpha, | ||
| float | cotbeta, | ||
| int | qBin, | ||
| float & | sigmay, | ||
| float & | sigmax, | ||
| float & | sy1, | ||
| float & | sy2, | ||
| float & | sx1, | ||
| float & | sx2 | ||
| ) |
Interpolate beta/alpha angles to produce estimated errors for fastsim
| id | - (input) index of the template to use |
| cotalpha | - (input) the cotangent of the alpha track angle (see CMS IN 2004/014) |
| cotbeta | - (input) the cotangent of the beta track angle (see CMS IN 2004/014) |
| qBin | - (input) charge bin from 0-3 |
| sigmay | - (output) the estimated y-error for CPETemplate in microns |
| sigmax | - (output) the estimated x-error for CPETemplate in microns |
| sy1 | - (output) the estimated y-error for 1 single-pixel clusters in microns |
| sy2 | - (output) the estimated y-error for 1 double-pixel clusters in microns |
| sx1 | - (output) the estimated x-error for 1 single-pixel clusters in microns |
| sx2 | - (output) the estimated x-error for 1 double-pixel clusters in microns |
Definition at line 2304 of file SiPixelTemplate.cc.
References Exception, i, and getHLTprescales::index.
Referenced by SiPixelGaussianSmearingRecHitConverterAlgorithm::smearHit().
{
// Interpolate for a new set of track angles
// Local variables
int i;
int ilow, ihigh, iylow, iyhigh, Ny, Nxx, Nyx, imidy, imaxx, index;
float yratio, yxratio, xxratio;
float acotb, cotb;
float yrms, xrms;
bool flip_y;
// Find the index corresponding to id
index = -1;
for(i=0; i<(int)thePixelTemp.size(); ++i) {
if(id == thePixelTemp[i].head.ID) {
index = i;
break;
}
}
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(index < 0 || index >= (int)thePixelTemp.size()) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::temperrors can't find needed template ID = " << id << std::endl;
}
#else
assert(index >= 0 && index < (int)thePixelTemp.size());
#endif
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(qBin < 0 || qBin > 5) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::temperrors called with illegal qBin = " << qBin << std::endl;
}
#else
assert(qBin >= 0 && qBin < 6);
#endif
// The error information for qBin > 3 is taken to be the same as qBin=3
if(qBin > 3) {qBin = 3;}
//
// Interpolate the absolute value of cot(beta)
acotb = fabs((double)cotbeta);
cotb = cotbeta;
// for some cosmics, the ususal gymnastics are incorrect
// if(thePixelTemp[index].head.Dtype == 0) {
cotb = acotb;
flip_y = false;
if(cotbeta < 0.) {flip_y = true;}
// } else {
// if(locBz < 0.) {
// cotb = cotbeta;
// flip_y = false;
// } else {
// cotb = -cotbeta;
// flip_y = true;
// }
// }
// Copy the charge scaling factor to the private variable
Ny = thePixelTemp[index].head.NTy;
Nyx = thePixelTemp[index].head.NTyx;
Nxx = thePixelTemp[index].head.NTxx;
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(Ny < 2 || Nyx < 1 || Nxx < 2) {
throw cms::Exception("DataCorrupt") << "template ID = " << id_current << "has too few entries: Ny/Nyx/Nxx = " << Ny << "/" << Nyx << "/" << Nxx << std::endl;
}
#else
assert(Ny > 1 && Nyx > 0 && Nxx > 1);
#endif
imaxx = Nyx - 1;
imidy = Nxx/2;
// next, loop over all y-angle entries
ilow = 0;
yratio = 0.;
if(cotb >= thePixelTemp[index].enty[Ny-1].cotbeta) {
ilow = Ny-2;
yratio = 1.;
} else {
if(cotb >= thePixelTemp[index].enty[0].cotbeta) {
for (i=0; i<Ny-1; ++i) {
if( thePixelTemp[index].enty[i].cotbeta <= cotb && cotb < thePixelTemp[index].enty[i+1].cotbeta) {
ilow = i;
yratio = (cotb - thePixelTemp[index].enty[i].cotbeta)/(thePixelTemp[index].enty[i+1].cotbeta - thePixelTemp[index].enty[i].cotbeta);
break;
}
}
}
}
ihigh=ilow + 1;
// Interpolate/store all y-related quantities (flip displacements when flip_y)
sy1 = (1. - yratio)*thePixelTemp[index].enty[ilow].syone + yratio*thePixelTemp[index].enty[ihigh].syone;
sy2 = (1. - yratio)*thePixelTemp[index].enty[ilow].sytwo + yratio*thePixelTemp[index].enty[ihigh].sytwo;
yrms=(1. - yratio)*thePixelTemp[index].enty[ilow].yrms[qBin] + yratio*thePixelTemp[index].enty[ihigh].yrms[qBin];
// next, loop over all x-angle entries, first, find relevant y-slices
iylow = 0;
yxratio = 0.;
if(acotb >= thePixelTemp[index].entx[Nyx-1][0].cotbeta) {
iylow = Nyx-2;
yxratio = 1.;
} else if(acotb >= thePixelTemp[index].entx[0][0].cotbeta) {
for (i=0; i<Nyx-1; ++i) {
if( thePixelTemp[index].entx[i][0].cotbeta <= acotb && acotb < thePixelTemp[index].entx[i+1][0].cotbeta) {
iylow = i;
yxratio = (acotb - thePixelTemp[index].entx[i][0].cotbeta)/(thePixelTemp[index].entx[i+1][0].cotbeta - thePixelTemp[index].entx[i][0].cotbeta);
break;
}
}
}
iyhigh=iylow + 1;
ilow = 0;
xxratio = 0.;
if(cotalpha >= thePixelTemp[index].entx[0][Nxx-1].cotalpha) {
ilow = Nxx-2;
xxratio = 1.;
} else {
if(cotalpha >= thePixelTemp[index].entx[0][0].cotalpha) {
for (i=0; i<Nxx-1; ++i) {
if( thePixelTemp[index].entx[0][i].cotalpha <= cotalpha && cotalpha < thePixelTemp[index].entx[0][i+1].cotalpha) {
ilow = i;
xxratio = (cotalpha - thePixelTemp[index].entx[0][i].cotalpha)/(thePixelTemp[index].entx[0][i+1].cotalpha - thePixelTemp[index].entx[0][i].cotalpha);
break;
}
}
}
}
ihigh=ilow + 1;
sx1 = (1. - xxratio)*thePixelTemp[index].entx[0][ilow].sxone + xxratio*thePixelTemp[index].entx[0][ihigh].sxone;
sx2 = (1. - xxratio)*thePixelTemp[index].entx[0][ilow].sxtwo + xxratio*thePixelTemp[index].entx[0][ihigh].sxtwo;
xrms=(1. - yxratio)*((1. - xxratio)*thePixelTemp[index].entx[iylow][ilow].xrms[qBin] + xxratio*thePixelTemp[index].entx[iylow][ihigh].xrms[qBin])
+yxratio*((1. - xxratio)*thePixelTemp[index].entx[iyhigh][ilow].xrms[qBin] + xxratio*thePixelTemp[index].entx[iyhigh][ihigh].xrms[qBin]);
// Take the errors and bias from the correct charge bin
sigmay = yrms;
sigmax = xrms;
return;
} // temperrors
| void SiPixelTemplate::vavilov_pars | ( | double & | mpv, |
| double & | sigma, | ||
| double & | kappa | ||
| ) |
Interpolate beta/alpha angles to produce Vavilov parameters for the charge distribution
| mpv | - (output) the Vavilov most probable charge (well, not really the most probable esp at large kappa) |
| sigma | - (output) the Vavilov sigma parameter |
| kappa | - (output) the Vavilov kappa parameter [0.01 (Landau-like) < kappa < 10 (Gaussian-like) |
Definition at line 2905 of file SiPixelTemplate.cc.
References Exception, i, and mathSSE::sqrt().
Referenced by SiPixelTemplateReco::PixelTempReco2D().
{
// Local variables
int i;
int ilow, ihigh, Ny;
float yratio, cotb;
// Interpolate in cotbeta only for the correct total path length (converts cotalpha, cotbeta into an effective cotbeta)
cotb = sqrt(cotb_current*cotb_current + cota_current*cota_current);
// Copy the charge scaling factor to the private variable
Ny = thePixelTemp[index_id].head.NTy;
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(Ny < 2) {
throw cms::Exception("DataCorrupt") << "template ID = " << id_current << "has too few entries: Ny = " << Ny << std::endl;
}
#else
assert(Ny > 1);
#endif
// next, loop over all y-angle entries
ilow = 0;
yratio = 0.;
if(cotb >= thePixelTemp[index_id].enty[Ny-1].cotbeta) {
ilow = Ny-2;
yratio = 1.;
} else {
if(cotb >= thePixelTemp[index_id].enty[0].cotbeta) {
for (i=0; i<Ny-1; ++i) {
if( thePixelTemp[index_id].enty[i].cotbeta <= cotb && cotb < thePixelTemp[index_id].enty[i+1].cotbeta) {
ilow = i;
yratio = (cotb - thePixelTemp[index_id].enty[i].cotbeta)/(thePixelTemp[index_id].enty[i+1].cotbeta - thePixelTemp[index_id].enty[i].cotbeta);
break;
}
}
}
}
ihigh=ilow + 1;
// Interpolate Vavilov parameters
pmpvvav = (1. - yratio)*thePixelTemp[index_id].enty[ilow].mpvvav + yratio*thePixelTemp[index_id].enty[ihigh].mpvvav;
psigmavav = (1. - yratio)*thePixelTemp[index_id].enty[ilow].sigmavav + yratio*thePixelTemp[index_id].enty[ihigh].sigmavav;
pkappavav = (1. - yratio)*thePixelTemp[index_id].enty[ilow].kappavav + yratio*thePixelTemp[index_id].enty[ihigh].kappavav;
// Copy to parameter list
mpv = (double)pmpvvav;
sigma = (double)psigmavav;
kappa = (double)pkappavav;
return;
} // vavilov_pars
| float SiPixelTemplate::xavg | ( | int | i | ) | [inline] |
average x-bias of reconstruction binned in 4 charge bins
Definition at line 326 of file SiPixelTemplate.h.
References Exception, i, and pxavg.
Referenced by SiPixelTemplateReco::PixelTempReco2D().
| float SiPixelTemplate::xavgc2m | ( | int | i | ) | [inline] |
1st pass chi2 min search: average x-bias of reconstruction binned in 4 charge bins
Definition at line 410 of file SiPixelTemplate.h.
References Exception, i, and pxavgc2m.
Referenced by SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::xflcorr | ( | int | binq, |
| float | qflx | ||
| ) |
Return interpolated x-correction for input charge bin and qflx
| binq | - (input) charge bin [0-3] |
| qflx | - (input) (Q_f-Q_l)/(Q_f+Q_l) for this cluster |
Definition at line 1573 of file SiPixelTemplate.cc.
References Exception.
Referenced by SiPixelTemplateReco::PixelTempReco2D().
{
// Interpolate using quantities already stored in the private variables
// Local variables
float qfl, qfl2, qfl3, qfl4, qfl5, dx;
// Make sure that input is OK
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(binq < 0 || binq > 3) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::xflcorr called with binq = " << binq << std::endl;
}
#else
assert(binq >= 0 && binq < 4);
#endif
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(fabs((double)qflx) > 1.) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::xflcorr called with qflx = " << qflx << std::endl;
}
#else
assert(fabs((double)qflx) <= 1.);
#endif
// Define the maximum signal to allow before de-weighting a pixel
qfl = qflx;
if(qfl < -0.9) {qfl = -0.9;}
if(qfl > 0.9) {qfl = 0.9;}
// Interpolate between the two polynomials
qfl2 = qfl*qfl; qfl3 = qfl2*qfl; qfl4 = qfl3*qfl; qfl5 = qfl4*qfl;
dx = (1. - pyxratio)*((1.-pxxratio)*(pxflparll[binq][0]+pxflparll[binq][1]*qfl+pxflparll[binq][2]*qfl2+pxflparll[binq][3]*qfl3+pxflparll[binq][4]*qfl4+pxflparll[binq][5]*qfl5)
+ pxxratio*(pxflparlh[binq][0]+pxflparlh[binq][1]*qfl+pxflparlh[binq][2]*qfl2+pxflparlh[binq][3]*qfl3+pxflparlh[binq][4]*qfl4+pxflparlh[binq][5]*qfl5))
+ pyxratio*((1.-pxxratio)*(pxflparhl[binq][0]+pxflparhl[binq][1]*qfl+pxflparhl[binq][2]*qfl2+pxflparhl[binq][3]*qfl3+pxflparhl[binq][4]*qfl4+pxflparhl[binq][5]*qfl5)
+ pxxratio*(pxflparhh[binq][0]+pxflparhh[binq][1]*qfl+pxflparhh[binq][2]*qfl2+pxflparhh[binq][3]*qfl3+pxflparhh[binq][4]*qfl4+pxflparhh[binq][5]*qfl5));
return dx;
} // End xflcorr
| float SiPixelTemplate::xgsig | ( | int | i | ) | [inline] |
average sigma_x from Gaussian fit binned in 4 charge bins
Definition at line 347 of file SiPixelTemplate.h.
| float SiPixelTemplate::xgsigc2m | ( | int | i | ) | [inline] |
1st pass chi2 min search: average sigma_x from Gaussian fit binned in 4 charge bins
Definition at line 431 of file SiPixelTemplate.h.
| float SiPixelTemplate::xgx0 | ( | int | i | ) | [inline] |
average x0 from Gaussian fit binned in 4 charge bins
Definition at line 340 of file SiPixelTemplate.h.
| float SiPixelTemplate::xgx0c2m | ( | int | i | ) | [inline] |
1st pass chi2 min search: average x0 from Gaussian fit binned in 4 charge bins
Definition at line 424 of file SiPixelTemplate.h.
| float SiPixelTemplate::xrms | ( | int | i | ) | [inline] |
average x-rms of reconstruction binned in 4 charge bins
Definition at line 333 of file SiPixelTemplate.h.
References Exception, i, and pxrms.
Referenced by SiPixelTemplateReco::PixelTempReco2D().
| float SiPixelTemplate::xrmsc2m | ( | int | i | ) | [inline] |
1st pass chi2 min search: average x-rms of reconstruction binned in 4 charge bins
Definition at line 417 of file SiPixelTemplate.h.
References Exception, i, and pxrmsc2m.
Referenced by SiPixelTemplateReco::PixelTempSplit().
| void SiPixelTemplate::xsigma2 | ( | int | fxpix, |
| int | lxpix, | ||
| float | sxthr, | ||
| float | xsum[BXSIZE], | ||
| float | xsig2[BXSIZE] | ||
| ) |
Return vector of x errors (squared) for an input vector of projected signals Add large Q scaling for use in cluster splitting.
| fxpix | - (input) index of the first real pixel in the projected cluster (doesn't include pseudopixels) |
| lxpix | - (input) index of the last real pixel in the projected cluster (doesn't include pseudopixels) |
| sxthr | - (input) maximum signal before de-weighting |
| xsum | - (input) 11-element vector of pixel signals |
| xsig2 | - (output) 11-element vector of x errors (squared) |
Definition at line 1414 of file SiPixelTemplate.cc.
References BHX, BXM2, ENDL, Exception, i, and LOGERROR.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
{
// Interpolate using quantities already stored in the private variables
// Local variables
int i;
float sigi, sigi2, sigi3, sigi4, yint, sxmax, x0, qscale;
// Make sure that input is OK
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(fxpix < 2 || fxpix >= BXM2) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::xsigma2 called with fxpix = " << fxpix << std::endl;
}
#else
assert(fxpix > 1 && fxpix < BXM2);
#endif
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(lxpix < fxpix || lxpix >= BXM2) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::xsigma2 called with lxpix/fxpix = " << lxpix << "/" << fxpix << std::endl;
}
#else
assert(lxpix >= fxpix && lxpix < BXM2);
#endif
// Define the maximum signal to use in the parameterization
sxmax = psxmax;
if(psxmax > psxparmax) {sxmax = psxparmax;}
// Evaluate pixel-by-pixel uncertainties (weights) for the templ analysis
for(i=fxpix-2; i<=lxpix+2; ++i) {
if(i < fxpix || i > lxpix) {
// Nearest pseudopixels have uncertainties of 50% of threshold, next-nearest have 10% of threshold
xsig2[i] = ps50*ps50;
} else {
if(xsum[i] < sxmax) {
sigi = xsum[i];
qscale = 1.;
} else {
sigi = sxmax;
qscale = xsum[i]/sxmax;
}
sigi2 = sigi*sigi; sigi3 = sigi2*sigi; sigi4 = sigi3*sigi;
// First, do the cotbeta interpolation
if(i <= BHX) {
yint = (1.-pyratio)*
(pxparly0[0][0]+pxparly0[0][1]*sigi+pxparly0[0][2]*sigi2+pxparly0[0][3]*sigi3+pxparly0[0][4]*sigi4)
+ pyratio*
(pxparhy0[0][0]+pxparhy0[0][1]*sigi+pxparhy0[0][2]*sigi2+pxparhy0[0][3]*sigi3+pxparhy0[0][4]*sigi4);
} else {
yint = (1.-pyratio)*
(pxparly0[1][0]+pxparly0[1][1]*sigi+pxparly0[1][2]*sigi2+pxparly0[1][3]*sigi3+pxparly0[1][4]*sigi4)
+ pyratio*
(pxparhy0[1][0]+pxparhy0[1][1]*sigi+pxparhy0[1][2]*sigi2+pxparhy0[1][3]*sigi3+pxparhy0[1][4]*sigi4);
}
// Next, do the cotalpha interpolation
if(i <= BHX) {
xsig2[i] = (1.-pxxratio)*
(pxparl[0][0]+pxparl[0][1]*sigi+pxparl[0][2]*sigi2+pxparl[0][3]*sigi3+pxparl[0][4]*sigi4)
+ pxxratio*
(pxparh[0][0]+pxparh[0][1]*sigi+pxparh[0][2]*sigi2+pxparh[0][3]*sigi3+pxparh[0][4]*sigi4);
} else {
xsig2[i] = (1.-pxxratio)*
(pxparl[1][0]+pxparl[1][1]*sigi+pxparl[1][2]*sigi2+pxparl[1][3]*sigi3+pxparl[1][4]*sigi4)
+ pxxratio*
(pxparh[1][0]+pxparh[1][1]*sigi+pxparh[1][2]*sigi2+pxparh[1][3]*sigi3+pxparh[1][4]*sigi4);
}
// Finally, get the mid-point value of the cotalpha function
if(i <= BHX) {
x0 = pxpar0[0][0]+pxpar0[0][1]*sigi+pxpar0[0][2]*sigi2+pxpar0[0][3]*sigi3+pxpar0[0][4]*sigi4;
} else {
x0 = pxpar0[1][0]+pxpar0[1][1]*sigi+pxpar0[1][2]*sigi2+pxpar0[1][3]*sigi3+pxpar0[1][4]*sigi4;
}
// Finally, rescale the yint value for cotalpha variation
if(x0 != 0.) {xsig2[i] = xsig2[i]/x0 * yint;}
xsig2[i] *=qscale;
if(xsum[i] > sxthr) {xsig2[i] = 1.e8;}
if(xsig2[i] <= 0.) {LOGERROR("SiPixelTemplate") << "neg x-error-squared, id = " << id_current << ", index = " << index_id <<
", cot(alpha) = " << cota_current << ", cot(beta) = " << cotb_current << ", sigi = " << sigi << ENDL;}
}
}
return;
} // End xsigma2
| float SiPixelTemplate::xsize | ( | ) | [inline] |
pixel x-size (microns)
Definition at line 447 of file SiPixelTemplate.h.
References pxsize.
Referenced by SiPixelTemplateReco::PixelTempReco2D().
| void SiPixelTemplate::xtemp | ( | int | fxbin, |
| int | lxbin, | ||
| float | xtemplate[41][BXSIZE] | ||
| ) |
Return interpolated y-template in single call
| fxbin | - (input) index of first bin (0-40) to fill |
| fxbin | - (input) index of last bin (0-40) to fill |
| xtemplate | - (output) a 41x11 output buffer |
Definition at line 1703 of file SiPixelTemplate.cc.
References BXM1, BXM2, BXSIZE, Exception, i, and j.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelGaussianSmearingRecHitConverterAlgorithm::smearHit().
{
// Retrieve already interpolated quantities
// Local variables
int i, j;
// Verify that input parameters are in valid range
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(fxbin < 0 || fxbin > 40) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::xtemp called with fxbin = " << fxbin << std::endl;
}
#else
assert(fxbin >= 0 && fxbin < 41);
#endif
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(lxbin < 0 || lxbin > 40) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::xtemp called with lxbin = " << lxbin << std::endl;
}
#else
assert(lxbin >= 0 && lxbin < 41);
#endif
// Build the x-template, the central 25 bins are here in all cases
for(i=0; i<9; ++i) {
for(j=0; j<BXSIZE; ++j) {
xtemplate[i+16][j]=pxtemp[i][j];
}
}
for(i=0; i<8; ++i) {
xtemplate[i+8][BXM1] = 0.;
for(j=0; j<BXM1; ++j) {
xtemplate[i+8][j]=pxtemp[i][j+1];
}
}
for(i=1; i<9; ++i) {
xtemplate[i+24][0] = 0.;
for(j=0; j<BXM1; ++j) {
xtemplate[i+24][j+1]=pxtemp[i][j];
}
}
// Add more bins if needed
if(fxbin < 8) {
for(i=0; i<8; ++i) {
xtemplate[i][BXM2] = 0.;
xtemplate[i][BXM1] = 0.;
for(j=0; j<BXM2; ++j) {
xtemplate[i][j]=pxtemp[i][j+2];
}
}
}
if(lxbin > 32) {
for(i=1; i<9; ++i) {
xtemplate[i+32][0] = 0.;
xtemplate[i+32][1] = 0.;
for(j=0; j<BXM2; ++j) {
xtemplate[i+32][j+2]=pxtemp[i][j];
}
}
}
return;
} // End xtemp
| void SiPixelTemplate::xtemp3d | ( | int | nxpix, |
| array_3d & | xtemplate | ||
| ) |
Return interpolated 3d y-template in single call
| nxpix | - (input) number of pixels in cluster (needed to size template) |
| xtemplate | - (output) a boost 3d array containing two sets of temlate indices and the combined pixel signals |
Definition at line 1871 of file SiPixelTemplate.cc.
References BXM1, BXM3, BXSIZE, diffTreeTool::diff, Exception, i, j, gen::k, and RecoTauCommonJetSelections_cfi::nbins.
Referenced by SiPixelTemplateReco::PixelTempSplit().
{
typedef boost::multi_array<float, 2> array_2d;
// Retrieve already interpolated quantities
// Local variables
int i, j, k;
int ioff0, ioffp, ioffm;
// Verify that input parameters are in valid range
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(nxpix < 1 || nxpix >= BXM3) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::xtemp3d called with nxpix = " << nxpix << std::endl;
}
#else
assert(nxpix > 0 && nxpix < BXM3);
#endif
// Calculate the size of the shift in pixels needed to span the entire cluster
float diff = fabsf(nxpix - pclslenx)/2. + 1.;
int nshift = (int)diff;
if((diff - nshift) > 0.5) {++nshift;}
// Calculate the number of bins needed to specify each hit range
int nbins = 9 + 16*nshift;
// Create a 2-d working template with the correct size
array_2d temp2d(boost::extents[nbins][BXSIZE]);
// The 9 central bins are copied from the interpolated private store
ioff0 = 8*nshift;
for(i=0; i<9; ++i) {
for(j=0; j<BXSIZE; ++j) {
temp2d[i+ioff0][j]=pxtemp[i][j];
}
}
// Add the +- shifted templates
for(k=1; k<=nshift; ++k) {
ioffm=ioff0-k*8;
for(i=0; i<8; ++i) {
for(j=0; j<k; ++j) {
temp2d[i+ioffm][BXM1-j] = 0.;
}
for(j=0; j<BXSIZE-k; ++j) {
temp2d[i+ioffm][j]=pxtemp[i][j+k];
}
}
ioffp=ioff0+k*8;
for(i=1; i<9; ++i) {
for(j=0; j<k; ++j) {
temp2d[i+ioffp][j] = 0.;
}
for(j=0; j<BXSIZE-k; ++j) {
temp2d[i+ioffp][j+k]=pxtemp[i][j];
}
}
}
// Resize the 3d template container
xtemplate.resize(boost::extents[nbins][nbins][BXSIZE]);
// Sum two 2-d templates to make the 3-d template
for(i=0; i<nbins; ++i) {
for(j=0; j<=i; ++j) {
for(k=0; k<BXSIZE; ++k) {
xtemplate[i][j][k]=temp2d[i][k]+temp2d[j][k];
}
}
}
return;
} // End xtemp3d
| float SiPixelTemplate::xxratio | ( | ) | [inline] |
fractional distance in x between cotalpha templates
Definition at line 297 of file SiPixelTemplate.h.
References pxxratio.
| float SiPixelTemplate::yavg | ( | int | i | ) | [inline] |
average y-bias of reconstruction binned in 4 charge bins
Definition at line 298 of file SiPixelTemplate.h.
References Exception, i, and pyavg.
Referenced by SiPixelTemplateReco::PixelTempReco2D().
| float SiPixelTemplate::yavgc2m | ( | int | i | ) | [inline] |
1st pass chi2 min search: average y-bias of reconstruction binned in 4 charge bins
Definition at line 382 of file SiPixelTemplate.h.
References Exception, i, and pyavgc2m.
Referenced by SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::yflcorr | ( | int | binq, |
| float | qfly | ||
| ) |
Return interpolated y-correction for input charge bin and qfly
| binq | - (input) charge bin [0-3] |
| qfly | - (input) (Q_f-Q_l)/(Q_f+Q_l) for this cluster |
Definition at line 1521 of file SiPixelTemplate.cc.
References Exception.
Referenced by SiPixelTemplateReco::PixelTempReco2D().
{
// Interpolate using quantities already stored in the private variables
// Local variables
float qfl, qfl2, qfl3, qfl4, qfl5, dy;
// Make sure that input is OK
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(binq < 0 || binq > 3) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::yflcorr called with binq = " << binq << std::endl;
}
#else
assert(binq >= 0 && binq < 4);
#endif
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(fabs((double)qfly) > 1.) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::yflcorr called with qfly = " << qfly << std::endl;
}
#else
assert(fabs((double)qfly) <= 1.);
#endif
// Define the maximum signal to allow before de-weighting a pixel
qfl = qfly;
if(qfl < -0.9) {qfl = -0.9;}
if(qfl > 0.9) {qfl = 0.9;}
// Interpolate between the two polynomials
qfl2 = qfl*qfl; qfl3 = qfl2*qfl; qfl4 = qfl3*qfl; qfl5 = qfl4*qfl;
dy = (1.-pyratio)*(pyflparl[binq][0]+pyflparl[binq][1]*qfl+pyflparl[binq][2]*qfl2+pyflparl[binq][3]*qfl3+pyflparl[binq][4]*qfl4+pyflparl[binq][5]*qfl5)
+ pyratio*(pyflparh[binq][0]+pyflparh[binq][1]*qfl+pyflparh[binq][2]*qfl2+pyflparh[binq][3]*qfl3+pyflparh[binq][4]*qfl4+pyflparh[binq][5]*qfl5);
return dy;
} // End yflcorr
| float SiPixelTemplate::ygsig | ( | int | i | ) | [inline] |
average sigma_y from Gaussian fit binned in 4 charge bins
Definition at line 319 of file SiPixelTemplate.h.
| float SiPixelTemplate::ygsigc2m | ( | int | i | ) | [inline] |
1st pass chi2 min search: average sigma_y from Gaussian fit binned in 4 charge bins
Definition at line 403 of file SiPixelTemplate.h.
| float SiPixelTemplate::ygx0 | ( | int | i | ) | [inline] |
average y0 from Gaussian fit binned in 4 charge bins
Definition at line 312 of file SiPixelTemplate.h.
| float SiPixelTemplate::ygx0c2m | ( | int | i | ) | [inline] |
1st pass chi2 min search: average y0 from Gaussian fit binned in 4 charge bins
Definition at line 396 of file SiPixelTemplate.h.
| float SiPixelTemplate::yratio | ( | ) | [inline] |
fractional distance in y between cotbeta templates
Definition at line 295 of file SiPixelTemplate.h.
References pyratio.
| float SiPixelTemplate::yrms | ( | int | i | ) | [inline] |
average y-rms of reconstruction binned in 4 charge bins
Definition at line 305 of file SiPixelTemplate.h.
References Exception, i, and pyrms.
Referenced by SiPixelTemplateReco::PixelTempReco2D().
| float SiPixelTemplate::yrmsc2m | ( | int | i | ) | [inline] |
1st pass chi2 min search: average y-rms of reconstruction binned in 4 charge bins
Definition at line 389 of file SiPixelTemplate.h.
References Exception, i, and pyrmsc2m.
Referenced by SiPixelTemplateReco::PixelTempSplit().
| void SiPixelTemplate::ysigma2 | ( | float | qpixel, |
| int | index, | ||
| float & | ysig2 | ||
| ) |
Return y error (squared) for an input signal and yindex Add large Q scaling for use in cluster splitting.
| qpixel | - (input) pixel charge |
| index | - (input) y-index index of pixel |
| ysig2 | - (output) square error |
Definition at line 1349 of file SiPixelTemplate.cc.
References BHY, BYM2, ENDL, Exception, and LOGERROR.
{
// Interpolate using quantities already stored in the private variables
// Local variables
float sigi, sigi2, sigi3, sigi4, symax, qscale, err2;
// Make sure that input is OK
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(index < 2 || index >= BYM2) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::ysigma2 called with index = " << index << std::endl;
}
#else
assert(index > 1 && index < BYM2);
#endif
// Define the maximum signal to use in the parameterization
symax = psymax;
if(psymax > psyparmax) {symax = psyparmax;}
// Evaluate pixel-by-pixel uncertainties (weights) for the templ analysis
if(qpixel < symax) {
sigi = qpixel;
qscale = 1.;
} else {
sigi = symax;
qscale = qpixel/symax;
}
sigi2 = sigi*sigi; sigi3 = sigi2*sigi; sigi4 = sigi3*sigi;
if(index <= BHY) {
err2 = (1.-pyratio)*
(pyparl[0][0]+pyparl[0][1]*sigi+pyparl[0][2]*sigi2+pyparl[0][3]*sigi3+pyparl[0][4]*sigi4)
+ pyratio*
(pyparh[0][0]+pyparh[0][1]*sigi+pyparh[0][2]*sigi2+pyparh[0][3]*sigi3+pyparh[0][4]*sigi4);
} else {
err2 = (1.-pyratio)*
(pyparl[1][0]+pyparl[1][1]*sigi+pyparl[1][2]*sigi2+pyparl[1][3]*sigi3+pyparl[1][4]*sigi4)
+ pyratio*
(pyparh[1][0]+pyparh[1][1]*sigi+pyparh[1][2]*sigi2+pyparh[1][3]*sigi3+pyparh[1][4]*sigi4);
}
ysig2 =qscale*err2;
if(ysig2 <= 0.) {LOGERROR("SiPixelTemplate") << "neg y-error-squared, id = " << id_current << ", index = " << index_id <<
", cot(alpha) = " << cota_current << ", cot(beta) = " << cotb_current << ", sigi = " << sigi << ENDL;}
return;
} // End ysigma2
| void SiPixelTemplate::ysigma2 | ( | int | fypix, |
| int | lypix, | ||
| float | sythr, | ||
| float | ysum[BYSIZE], | ||
| float | ysig2[BYSIZE] | ||
| ) |
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelTemplateReco::PixelTempSplit().
| float SiPixelTemplate::ysize | ( | ) | [inline] |
pixel y-size (microns)
Definition at line 448 of file SiPixelTemplate.h.
References pysize.
Referenced by SiPixelTemplateReco::PixelTempReco2D().
| void SiPixelTemplate::ytemp | ( | int | fybin, |
| int | lybin, | ||
| float | ytemplate[41][BYSIZE] | ||
| ) |
Return interpolated y-template in single call
| fybin | - (input) index of first bin (0-40) to fill |
| fybin | - (input) index of last bin (0-40) to fill |
| ytemplate | - (output) a 41x25 output buffer |
Definition at line 1625 of file SiPixelTemplate.cc.
References BYM1, BYM2, BYSIZE, Exception, i, and j.
Referenced by SiPixelTemplateReco::PixelTempReco2D(), and SiPixelGaussianSmearingRecHitConverterAlgorithm::smearHit().
{
// Retrieve already interpolated quantities
// Local variables
int i, j;
// Verify that input parameters are in valid range
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(fybin < 0 || fybin > 40) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::ytemp called with fybin = " << fybin << std::endl;
}
#else
assert(fybin >= 0 && fybin < 41);
#endif
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(lybin < 0 || lybin > 40) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::ytemp called with lybin = " << lybin << std::endl;
}
#else
assert(lybin >= 0 && lybin < 41);
#endif
// Build the y-template, the central 25 bins are here in all cases
for(i=0; i<9; ++i) {
for(j=0; j<BYSIZE; ++j) {
ytemplate[i+16][j]=pytemp[i][j];
}
}
for(i=0; i<8; ++i) {
ytemplate[i+8][BYM1] = 0.;
for(j=0; j<BYM1; ++j) {
ytemplate[i+8][j]=pytemp[i][j+1];
}
}
for(i=1; i<9; ++i) {
ytemplate[i+24][0] = 0.;
for(j=0; j<BYM1; ++j) {
ytemplate[i+24][j+1]=pytemp[i][j];
}
}
// Add more bins if needed
if(fybin < 8) {
for(i=0; i<8; ++i) {
ytemplate[i][BYM2] = 0.;
ytemplate[i][BYM1] = 0.;
for(j=0; j<BYM2; ++j) {
ytemplate[i][j]=pytemp[i][j+2];
}
}
}
if(lybin > 32) {
for(i=1; i<9; ++i) {
ytemplate[i+32][0] = 0.;
ytemplate[i+32][1] = 0.;
for(j=0; j<BYM2; ++j) {
ytemplate[i+32][j+2]=pytemp[i][j];
}
}
}
return;
} // End ytemp
| void SiPixelTemplate::ytemp3d | ( | int | nypix, |
| array_3d & | ytemplate | ||
| ) |
Return interpolated 3d y-template in single call
| nypix | - (input) number of pixels in cluster (needed to size template) |
| ytemplate | - (output) a boost 3d array containing two sets of temlate indices and the combined pixel signals |
Definition at line 1779 of file SiPixelTemplate.cc.
References BYM1, BYM3, BYSIZE, diffTreeTool::diff, Exception, i, j, gen::k, and RecoTauCommonJetSelections_cfi::nbins.
Referenced by SiPixelTemplateReco::PixelTempSplit().
{
typedef boost::multi_array<float, 2> array_2d;
// Retrieve already interpolated quantities
// Local variables
int i, j, k;
int ioff0, ioffp, ioffm;
// Verify that input parameters are in valid range
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
if(nypix < 1 || nypix >= BYM3) {
throw cms::Exception("DataCorrupt") << "SiPixelTemplate::ytemp3d called with nypix = " << nypix << std::endl;
}
#else
assert(nypix > 0 && nypix < BYM3);
#endif
// Calculate the size of the shift in pixels needed to span the entire cluster
float diff = fabsf(nypix - pclsleny)/2. + 1.;
int nshift = (int)diff;
if((diff - nshift) > 0.5) {++nshift;}
// Calculate the number of bins needed to specify each hit range
int nbins = 9 + 16*nshift;
// Create a 2-d working template with the correct size
array_2d temp2d(boost::extents[nbins][BYSIZE]);
// The 9 central bins are copied from the interpolated private store
ioff0 = 8*nshift;
for(i=0; i<9; ++i) {
for(j=0; j<BYSIZE; ++j) {
temp2d[i+ioff0][j]=pytemp[i][j];
}
}
// Add the +- shifted templates
for(k=1; k<=nshift; ++k) {
ioffm=ioff0-k*8;
for(i=0; i<8; ++i) {
for(j=0; j<k; ++j) {
temp2d[i+ioffm][BYM1-j] = 0.;
}
for(j=0; j<BYSIZE-k; ++j) {
temp2d[i+ioffm][j]=pytemp[i][j+k];
}
}
ioffp=ioff0+k*8;
for(i=1; i<9; ++i) {
for(j=0; j<k; ++j) {
temp2d[i+ioffp][j] = 0.;
}
for(j=0; j<BYSIZE-k; ++j) {
temp2d[i+ioffp][j+k]=pytemp[i][j];
}
}
}
// Resize the 3d template container
ytemplate.resize(boost::extents[nbins][nbins][BYSIZE]);
// Sum two 2-d templates to make the 3-d template
for(i=0; i<nbins; ++i) {
for(j=0; j<=i; ++j) {
for(k=0; k<BYSIZE; ++k) {
ytemplate[i][j][k]=temp2d[i][k]+temp2d[j][k];
}
}
}
return;
} // End ytemp3d
| float SiPixelTemplate::yxratio | ( | ) | [inline] |
fractional distance in y between cotalpha templates slices
Definition at line 296 of file SiPixelTemplate.h.
References pyxratio.
| float SiPixelTemplate::zsize | ( | ) | [inline] |
pixel z-size or thickness (microns)
Definition at line 449 of file SiPixelTemplate.h.
References pzsize.
float SiPixelTemplate::abs_cotb [private] |
absolute value of cot beta
Definition at line 462 of file SiPixelTemplate.h.
float SiPixelTemplate::cota_current [private] |
current cot alpha
Definition at line 460 of file SiPixelTemplate.h.
Referenced by SiPixelTemplate().
float SiPixelTemplate::cotb_current [private] |
int SiPixelTemplate::id_current [private] |
int SiPixelTemplate::index_id [private] |
float SiPixelTemplate::pchi2xavg[4] [private] |
average x chi^2 in 4 charge bins
Definition at line 515 of file SiPixelTemplate.h.
Referenced by chi2xavg().
float SiPixelTemplate::pchi2xavgone [private] |
average x chi^2 for 1 pixel clusters
Definition at line 527 of file SiPixelTemplate.h.
Referenced by chi2xavgone().
float SiPixelTemplate::pchi2xmin[4] [private] |
minimum of x chi^2 in 4 charge bins
Definition at line 516 of file SiPixelTemplate.h.
Referenced by chi2xmin().
float SiPixelTemplate::pchi2xminone [private] |
minimum of x chi^2 for 1 pixel clusters
Definition at line 528 of file SiPixelTemplate.h.
Referenced by chi2xminone().
float SiPixelTemplate::pchi2yavg[4] [private] |
average y chi^2 in 4 charge bins
Definition at line 513 of file SiPixelTemplate.h.
Referenced by chi2yavg().
float SiPixelTemplate::pchi2yavgone [private] |
average y chi^2 for 1 pixel clusters
Definition at line 525 of file SiPixelTemplate.h.
Referenced by chi2yavgone().
float SiPixelTemplate::pchi2ymin[4] [private] |
minimum of y chi^2 in 4 charge bins
Definition at line 514 of file SiPixelTemplate.h.
Referenced by chi2ymin().
float SiPixelTemplate::pchi2yminone [private] |
minimum of y chi^2 for 1 pixel clusters
Definition at line 526 of file SiPixelTemplate.h.
Referenced by chi2yminone().
float SiPixelTemplate::pclslenx [private] |
x-cluster length of smaller interpolated template in pixels
Definition at line 486 of file SiPixelTemplate.h.
Referenced by clslenx().
float SiPixelTemplate::pclsleny [private] |
y-cluster length of smaller interpolated template in pixels
Definition at line 485 of file SiPixelTemplate.h.
Referenced by clsleny().
float SiPixelTemplate::pdxone [private] |
mean offset/correction for one pixel x-clusters
Definition at line 480 of file SiPixelTemplate.h.
Referenced by dxone().
float SiPixelTemplate::pdxtwo [private] |
mean offset/correction for one double-pixel x-clusters
Definition at line 482 of file SiPixelTemplate.h.
Referenced by dxtwo().
float SiPixelTemplate::pdyone [private] |
mean offset/correction for one pixel y-clusters
Definition at line 474 of file SiPixelTemplate.h.
Referenced by dyone().
float SiPixelTemplate::pdytwo [private] |
mean offset/correction for one double-pixel y-clusters
Definition at line 476 of file SiPixelTemplate.h.
Referenced by dytwo().
float SiPixelTemplate::pkappavav [private] |
kappa parameter for Vavilov distribution
Definition at line 532 of file SiPixelTemplate.h.
Referenced by kappavav().
float SiPixelTemplate::plorxwidth [private] |
float SiPixelTemplate::plorywidth [private] |
Lorentz y-width (sign corrected for fpix frame)
Definition at line 533 of file SiPixelTemplate.h.
Referenced by lorywidth().
float SiPixelTemplate::pmpvvav [private] |
most probable charge in Vavilov distribution (not actually for larger kappa)
Definition at line 530 of file SiPixelTemplate.h.
Referenced by mpvvav().
float SiPixelTemplate::ppixmax [private] |
float SiPixelTemplate::pqavg [private] |
average cluster charge for this set of track angles
Definition at line 468 of file SiPixelTemplate.h.
Referenced by qavg().
float SiPixelTemplate::pqavg_avg [private] |
average of cluster charge less than qavg
Definition at line 538 of file SiPixelTemplate.h.
float SiPixelTemplate::pqmin [private] |
minimum cluster charge for valid hit (keeps 99.9% of simulated hits)
Definition at line 484 of file SiPixelTemplate.h.
Referenced by qmin().
float SiPixelTemplate::pqmin2 [private] |
tighter minimum cluster charge for valid hit (keeps 99.8% of simulated hits)
Definition at line 529 of file SiPixelTemplate.h.
Referenced by qmin().
float SiPixelTemplate::pqscale [private] |
float SiPixelTemplate::ps50 [private] |
1/2 of the pixel threshold signal in adc units
Definition at line 471 of file SiPixelTemplate.h.
Referenced by s50().
float SiPixelTemplate::psigmavav [private] |
"sigma" scale fctor for Vavilov distribution
Definition at line 531 of file SiPixelTemplate.h.
Referenced by sigmavav().
float SiPixelTemplate::psxmax [private] |
average pixel signal for x-projection of cluster
Definition at line 478 of file SiPixelTemplate.h.
Referenced by sxmax().
float SiPixelTemplate::psxone [private] |
rms for one pixel x-clusters
Definition at line 481 of file SiPixelTemplate.h.
Referenced by sxone().
float SiPixelTemplate::psxparmax [private] |
maximum pixel signal for parameterization of x uncertainties
Definition at line 479 of file SiPixelTemplate.h.
float SiPixelTemplate::psxtwo [private] |
rms for one double-pixel x-clusters
Definition at line 483 of file SiPixelTemplate.h.
Referenced by sxtwo().
float SiPixelTemplate::psymax [private] |
average pixel signal for y-projection of cluster
Definition at line 472 of file SiPixelTemplate.h.
Referenced by symax().
float SiPixelTemplate::psyone [private] |
rms for one pixel y-clusters
Definition at line 475 of file SiPixelTemplate.h.
Referenced by syone().
float SiPixelTemplate::psyparmax [private] |
maximum pixel signal for parameterization of y uncertainties
Definition at line 473 of file SiPixelTemplate.h.
float SiPixelTemplate::psytwo [private] |
rms for one double-pixel y-clusters
Definition at line 477 of file SiPixelTemplate.h.
Referenced by sytwo().
float SiPixelTemplate::pxavg[4] [private] |
average x-bias of reconstruction binned in 4 charge bins
Definition at line 505 of file SiPixelTemplate.h.
Referenced by xavg().
float SiPixelTemplate::pxavgc2m[4] [private] |
1st pass chi2 min search: average x-bias of reconstruction binned in 4 charge bins
Definition at line 521 of file SiPixelTemplate.h.
Referenced by xavgc2m().
float SiPixelTemplate::pxflparhh[4][6] [private] |
Aqfl-parameterized x-correction in 4 charge bins for larger cotbeta, cotalpha.
Definition at line 512 of file SiPixelTemplate.h.
float SiPixelTemplate::pxflparhl[4][6] [private] |
Aqfl-parameterized x-correction in 4 charge bins for larger cotbeta, smaller cotalpha.
Definition at line 511 of file SiPixelTemplate.h.
float SiPixelTemplate::pxflparlh[4][6] [private] |
Aqfl-parameterized x-correction in 4 charge bins for smaller cotbeta, larger cotalpha.
Definition at line 510 of file SiPixelTemplate.h.
float SiPixelTemplate::pxflparll[4][6] [private] |
Aqfl-parameterized x-correction in 4 charge bins for smaller cotbeta, cotalpha.
Definition at line 509 of file SiPixelTemplate.h.
float SiPixelTemplate::pxgsig[4] [private] |
sigma from Gaussian fit binned in 4 charge bins
Definition at line 508 of file SiPixelTemplate.h.
Referenced by xgsig().
float SiPixelTemplate::pxgsigc2m[4] [private] |
1st pass chi2 min search: sigma from Gaussian fit binned in 4 charge bins
Definition at line 524 of file SiPixelTemplate.h.
Referenced by xgsigc2m().
float SiPixelTemplate::pxgx0[4] [private] |
average x0 from Gaussian fit binned in 4 charge bins
Definition at line 507 of file SiPixelTemplate.h.
Referenced by xgx0().
float SiPixelTemplate::pxgx0c2m[4] [private] |
1st pass chi2 min search: average x0 from Gaussian fit binned in 4 charge bins
Definition at line 523 of file SiPixelTemplate.h.
Referenced by xgx0c2m().
float SiPixelTemplate::pxpar0[2][5] [private] |
projected x-pixel uncertainty parameterization for central cotalpha
Definition at line 495 of file SiPixelTemplate.h.
float SiPixelTemplate::pxparh[2][5] [private] |
projected x-pixel uncertainty parameterization for larger cotalpha
Definition at line 497 of file SiPixelTemplate.h.
float SiPixelTemplate::pxparhy0[2][5] [private] |
projected x-pixel uncertainty parameterization for larger cotbeta (central alpha)
Definition at line 491 of file SiPixelTemplate.h.
float SiPixelTemplate::pxparl[2][5] [private] |
projected x-pixel uncertainty parameterization for smaller cotalpha
Definition at line 496 of file SiPixelTemplate.h.
float SiPixelTemplate::pxparly0[2][5] [private] |
projected x-pixel uncertainty parameterization for smaller cotbeta (central alpha)
Definition at line 490 of file SiPixelTemplate.h.
float SiPixelTemplate::pxrms[4] [private] |
average x-rms of reconstruction binned in 4 charge bins
Definition at line 506 of file SiPixelTemplate.h.
Referenced by xrms().
float SiPixelTemplate::pxrmsc2m[4] [private] |
1st pass chi2 min search: average x-rms of reconstruction binned in 4 charge bins
Definition at line 522 of file SiPixelTemplate.h.
Referenced by xrmsc2m().
float SiPixelTemplate::pxsize [private] |
float SiPixelTemplate::pxtemp[9][BXSIZE] [private] |
templates for x-reconstruction (binned over 5 central pixels)
Definition at line 498 of file SiPixelTemplate.h.
float SiPixelTemplate::pxxratio [private] |
fractional distance in x between cotalpha templates
Definition at line 494 of file SiPixelTemplate.h.
Referenced by xxratio().
float SiPixelTemplate::pyavg[4] [private] |
average y-bias of reconstruction binned in 4 charge bins
Definition at line 499 of file SiPixelTemplate.h.
Referenced by yavg().
float SiPixelTemplate::pyavgc2m[4] [private] |
1st pass chi2 min search: average y-bias of reconstruction binned in 4 charge bins
Definition at line 517 of file SiPixelTemplate.h.
Referenced by yavgc2m().
float SiPixelTemplate::pyflparh[4][6] [private] |
Aqfl-parameterized y-correction in 4 charge bins for larger cotbeta.
Definition at line 504 of file SiPixelTemplate.h.
float SiPixelTemplate::pyflparl[4][6] [private] |
Aqfl-parameterized y-correction in 4 charge bins for smaller cotbeta.
Definition at line 503 of file SiPixelTemplate.h.
float SiPixelTemplate::pygsig[4] [private] |
average sigma_y from Gaussian fit binned in 4 charge bins
Definition at line 502 of file SiPixelTemplate.h.
Referenced by ygsig().
float SiPixelTemplate::pygsigc2m[4] [private] |
1st pass chi2 min search: average sigma_y from Gaussian fit binned in 4 charge bins
Definition at line 520 of file SiPixelTemplate.h.
Referenced by ygsigc2m().
float SiPixelTemplate::pygx0[4] [private] |
average y0 from Gaussian fit binned in 4 charge bins
Definition at line 501 of file SiPixelTemplate.h.
Referenced by ygx0().
float SiPixelTemplate::pygx0c2m[4] [private] |
1st pass chi2 min search: average y0 from Gaussian fit binned in 4 charge bins
Definition at line 519 of file SiPixelTemplate.h.
Referenced by ygx0c2m().
float SiPixelTemplate::pyparh[2][5] [private] |
projected y-pixel uncertainty parameterization for larger cotbeta
Definition at line 489 of file SiPixelTemplate.h.
float SiPixelTemplate::pyparl[2][5] [private] |
projected y-pixel uncertainty parameterization for smaller cotbeta
Definition at line 488 of file SiPixelTemplate.h.
float SiPixelTemplate::pyratio [private] |
fractional distance in y between cotbeta templates
Definition at line 487 of file SiPixelTemplate.h.
Referenced by yratio().
float SiPixelTemplate::pyrms[4] [private] |
average y-rms of reconstruction binned in 4 charge bins
Definition at line 500 of file SiPixelTemplate.h.
Referenced by yrms().
float SiPixelTemplate::pyrmsc2m[4] [private] |
1st pass chi2 min search: average y-rms of reconstruction binned in 4 charge bins
Definition at line 518 of file SiPixelTemplate.h.
Referenced by yrmsc2m().
float SiPixelTemplate::pysize [private] |
float SiPixelTemplate::pytemp[9][BYSIZE] [private] |
templates for y-reconstruction (binned over 5 central pixels)
Definition at line 492 of file SiPixelTemplate.h.
float SiPixelTemplate::pyxratio [private] |
fractional distance in y between x-slices of cotalpha templates
Definition at line 493 of file SiPixelTemplate.h.
Referenced by yxratio().
float SiPixelTemplate::pzsize [private] |
bool SiPixelTemplate::success [private] |
true if cotalpha, cotbeta are inside of the acceptance (dynamically loaded)
Definition at line 463 of file SiPixelTemplate.h.
std::vector< SiPixelTemplateStore > SiPixelTemplate::thePixelTemp [private] |
Definition at line 543 of file SiPixelTemplate.h.
1.7.3