|
|
|
#include "CondFormats/EcalObjects/interface/EcalSRSettings.h"#include "FWCore/Utilities/interface/Exception.h"#include <sstream>#include <iostream>#include <stdlib.h>#include <cassert>#include <algorithm>Go to the source code of this file.
Defines | |
| #define | SR_PRINT(a) o << #a ": " << val.a ## _ << "\n"; |
| #define | SR_VPRINT(a) |
| #define | SR_VVPRINT(a) |
Functions | |
| std::ostream & | operator<< (std::ostream &o, const EcalSRSettings &val) |
Definition at line 21 of file EcalSRSettings.cc.
Referenced by operator<<().
| #define SR_VPRINT | ( | a | ) |
| #define SR_VVPRINT | ( | a | ) |
if(val.a ## _.size() == 0) o << #a "[][]: <empty>\n"; \ for(size_t i = 0; i < val.a ## _.size(); ++i){ \ o << #a "[" << i << "]"; \ if(val.a ## _.size()) o << "[0.." << (val.a ## _[i].size() -1 ) << "]:"; \ else o << "[]: <empty>"; \ for(size_t j = 0; j < val.a ## _[i].size(); ++j) o << "\t" << val.a ## _[i][j]; \ o << "\n"; \ }
Definition at line 27 of file EcalSRSettings.cc.
Referenced by operator<<().
| std::ostream& operator<< | ( | std::ostream & | o, |
| const EcalSRSettings & | val | ||
| ) |
Definition at line 37 of file EcalSRSettings.cc.
References actions, Geom::deltaPhi(), connectstrParser::o, SR_PRINT, SR_VPRINT, and SR_VVPRINT.
{
o << "# Neighbour eta range, neighborhood: (2*deltaEta+1)*(2*deltaPhi+1)\n"
"# In the vector contains:\n"
"# - 1 element, then value applies to whole ECAL\n"
"# - 2 elements, then element 0 applies to EB, element 1 to EE\n"
"# - 12 elements, then element i applied to SRP (i+1)\n"
"# SRP emulation (see SimCalorimetry/EcalSelectiveReadoutProcuders) supports\n"
"# only 1 element mode.\n";
SR_VPRINT(deltaEta);
o << "\n# Neighbouring eta range, neighborhood: (2*deltaEta+1)*(2*deltaPhi+1)\n"
"# If the vector contains...\n"
"# ... 1 element, then value applies to whole ECAL\n"
"# ... 2 elements, then element 0 applies to EB, element 1 to EE\n"
"# ... 12 elements, then element i applied to SRP (i+1)\n"
"# If the vector contains...\n"
"# ... 1 element, then value applies to whole ECAL\n"
"# ... 2 elements, then element 0 applies to EB, element 1 to EE\n"
"# ... 12 elements, then element i applied to SRP (i+1)\n"
"# SRP emulation (see SimCalorimetry/EcalSelectiveReadoutProcuders) supports\n"
"# only the single-element mode.\n";
SR_VPRINT(deltaPhi);
o << "\n# Index of time sample (staring from 1) the first DCC weights is implied\n"
"# If the vector contains:\n"
"# ... 1 element, then value applies to whole ECAL\n"
"# ... 2 elements, then element 0 applies to EB, element 1 to EE\n"
"# ... 54 elements, then element i applied to DCC (i+1) (FED ID 651+i)\n"
"# SRP emulation (see SimCalorimetry/EcalSelectiveReadoutProcuders) supports\n"
"# only the single-element mode.\n";
SR_VPRINT(ecalDccZs1stSample);
o << "\n# ADC to GeV conversion factor used in ZS filter for EB\n";
SR_PRINT(ebDccAdcToGeV);
o << "\n# ADC to GeV conversion factor used in ZS filter for EE\n";
SR_PRINT(eeDccAdcToGeV);
o << "\n# DCC ZS FIR weights: weights are rounded in such way that in Hw\n"
"# representation (weigth*1024 rounded to nearest integer) the sum is null:\n"
"# Each element is a vector of 6 values, the 6 weights\n"
"# If the vector contains...\n"
"# ... 1 element, then the weight set applies to whole ECAL\n"
"# ... 2 elements, then element 0 applies to EB, element 1 to EE\n"
"# ... 54 elements, then element i applied to DCC (i+1) (FED ID 651+i)\n";
SR_VVPRINT(dccNormalizedWeights);
o << "\n# Switch to use a symetric zero suppression (cut on absolute value). For\n"
"# studies only, for time being it is not supported by the hardware.\n"
"# having troubles for vector<bool> with coral (3.8.0pre1), using vector<int> instead,\n"
"# 0 means false, a value different than 0 means true.\n"
"# If the vector contains...\n"
"# ... 1 element, then the weight set applies to whole ECAL\n"
"# ... 2 elements, then element 0 applies to EB, element 1 to EE\n"
"# ... 54 elements, then element i applied to DCC (i+1) (FED ID 651+i)\n"
"# ... 75848 elements, then:\n"
"# for i < 61200, element i applies to EB crystal with denseIndex i\n"
"# (see EBDetId::denseIndex())\n"
"# for i >= 61200, element i applies to EE crystal with denseIndex (i+61200)\n"
"# (see EBDetId::denseIndex())\n"
"# SRP emulation supports only 1 element mode. Hardware does not support\n"
"# the symetric ZS, so symetricZS = 0 for real data.\n";
SR_VPRINT(symetricZS);
o << "\n# ZS energy threshold in GeV to apply to low interest channels of barrel\n"
"# If the vector contains...\n"
"# ... 1 element, then the weight set applies to whole ECAL\n"
"# ... 2 elements, then element 0 applies to EB, element 1 to EE\n"
"# ... 54 elements, then element i applied to DCC (i+1) (FED ID 651+i)\n"
"# SRP emulation supports only the 2-element mode.\n"
"# Corresponds to srpBarrelLowInterestChannelZS and srpEndcapLowInterestChannelZS\n"
"# of python configuration file parameters\n";
SR_VPRINT(srpLowInterestChannelZS);
o << "\n# ZS energy threshold in GeV to apply to high interest channels of endcap\n"
"# If the vector contains...\n"
"# ... 1 element, then the weight set applies to whole ECAL\n"
"# ... 2 elements, then element 0 applies to EB, element 1 to EE\n"
"# ... 54 elements, then element i applied to DCC (i+1) (FED ID 651+i)\n"
"# SRP emulation supports only the 2-element mode.\n"
"# Corresponds to srpBarrelLowInterestChannelZS and srpEndcapLowInterestChannelZS\n"
"# of python configuration file parameters\n";
SR_VPRINT(srpHighInterestChannelZS);
// o << "\n# Switch to run w/o trigger primitive. For debug use only\n"
// "# having troubles for vector<bool> with coral (3.8.0pre1), using vector<int> instead\n"
// "# Parameter only relevant for emulation. For real data, must be contains 1 element with\n"
// "# value 0.\n"
// "# ... 1 element, then the weight set applies to whole ECAL\n"
// "# ... 2 elements, then element 0 applies to EB, element 1 to EE\n"
// "# ... 54 elements, then element i applied to DCC (i+1) (FED ID 651+i)\n"
// "# SRP emulation supports only the single-element mode.\n";
// SR_VPRINT(trigPrimBypass);\n"
//
// o << "\n# Mode selection for "# Trig bypass" mode\n"
// "# 0: TT thresholds applied on sum of crystal Et's\n"
// "# 1: TT thresholds applies on compressed Et from Trigger primitive\n"
// "# @see trigPrimByPass switch\n"
// "# Parameter only relevant for \n";
// SR_VPRINT(trigPrimBypassMode);
//
// o << "\n# for debug mode only:\n";
// SR_VPRINT( trigPrimBypassLTH);
//
// o << "\n# for debug mode only:\n";
// SR_VPRINT(trigPrimBypassHTH);
//
// o << "\n# for debug mode only\n"
// "# having troubles for vector<bool> with coral (3.8.0pre1), using vector<int> instead\n";
// SR_VPRINT( trigPrimBypassWithPeakFinder);
//
// o << "\n# Trigger Tower Flag to use when a flag is not found from the input\n"
// "# Trigger Primitive collection. Must be one of the following values:\n"
// "# 0: low interest, 1: mid interest, 3: high interest\n"
// "# 4: forced low interest, 5: forced mid interest, 7: forced high interest\n";
// SR_VPRINT(defaultTtf);\n"
o << "\n# SR->action flag map. 4 elements\n"
"# action_[i]: action for flag value i\n";
SR_VPRINT(actions);
o << "\n# Masks for TTC inputs of SRP cards\n"
"# One element per TCC, that is 108 elements: element i applies to TCC (i+1)\n";
SR_VPRINT(tccMasksFromConfig);
o << "\n# Masks for SRP-SRP inputs of SRP cards\n"
"# One element per SRP, that is 12 elements: element i applies to SRP (i+1)\n"
"# indices: [iSrp][iCh]\n";
SR_VVPRINT(srpMasksFromConfig);
o << "\n# Masks for DCC output of SRP cards\n"
"# One element per DCC, that is 54 elements: element i applies to DCC (i+1)\n";
SR_VPRINT(dccMasks);
o << "\n# Mask to enable pattern test. Typical value: 0.\n"
"# One element per SRP, that is 12 elements: element i applies to SRP (i+1)\n";
SR_VPRINT(srfMasks);
o << "\n# Substitution flags used in patterm mode\n"
"# indices: [iSrp][iFlag]\n";
SR_VVPRINT(substitutionSrfs);
o << "\n# Tester mode configuration\n";
SR_VPRINT(testerTccEmuSrpIds);
SR_VPRINT(testerSrpEmuSrpIds);
SR_VPRINT(testerDccTestSrpIds);
SR_VPRINT(testerSrpTestSrpIds);
o << "\n# Per SRP card bunch crossing counter offset.\n"
"# This offset is added to the bxGlobalOffset\n";
SR_VPRINT(bxOffsets);
o << "\n# SRP system bunch crossing counter offset.\n"
"# For each card the bxOffset[i]\n"
"# is added to this one.\n";
SR_PRINT(bxGlobalOffset);
o << "\n# Switch for automatic channel masking. 0: disabled; 1: enabled. Standard configuration: 1.\n"
"# When enabled, if a FED is excluded from the run, the corresponding TCC inputs is automatically\n"
"# masked (overwrites the tccInputMasks).\n";
SR_PRINT(automaticMasks);
o << "\n# Switch for automatic SRP card selection. 0: disabled; 1 : enabled..\n"
"# When enabled, if all the FEDs corresponding to a given SRP is excluded from the run,\n"
"# Then the corresponding SRP card is automatically excluded.\n";
SR_PRINT(automaticSrpSelect);
return o;
}
1.7.3