#include "MuonAnalysis/MomentumScaleCalibration/interface/MuScleFitUtils.h"
#include "DataFormats/HepMCCandidate/interface/GenParticle.h"
#include "SimDataFormats/Track/interface/SimTrack.h"
#include "DataFormats/Candidate/interface/LeafCandidate.h"
#include "DataFormats/Math/interface/LorentzVector.h"
#include "TString.h"
#include "TFile.h"
#include "TTree.h"
#include "TCanvas.h"
#include "TH2F.h"
#include "TF1.h"
#include "TF2.h"
#include <iostream>
#include <fstream>
#include <memory>
#include "MuonAnalysis/MomentumScaleCalibration/interface/Functions.h"

Functions
Double_t	Gaussian (Double_t x, Double_t par)
void	likelihood (int &npar, double grad, double &fval, double xval, int flag)
Double_t	lorentzianPeak (Double_t x, Double_t par)
Variables
double	f [11][100]
double	g [11][100]
TF1 *	GL
TF2 *	GL2
double	isum
double	mzsum

Function Documentation

Double_t Gaussian	(	Double_t *	x,
		Double_t *	par
	)

Definition at line 64 of file MuScleFitUtils.cc.

References funct::exp().

Referenced by MuScleFitUtils::fitReso().

                                               {
  return par[0]*exp(-0.5*((x[0]-par[1])/par[2])*((x[0]-par[1])/par[2]));
}

void likelihood	(	int &	npar,
		double *	grad,
		double &	fval,
		double *	xval,
		int	flag
	)

Definition at line 1648 of file MuScleFitUtils.cc.

References MuScleFitUtils::applyScale(), MuScleFitUtils::computeWeight(), gather_cfg::cout, MuScleFitUtils::debug, MuScleFitUtils::doScaleFit, reco::tau::disc::Eta(), MuScleFitUtils::iev_, MuScleFitUtils::invDimuonMass(), MuScleFitUtils::likelihoodInLoop_, funct::log(), MuScleFitUtils::loopCounter, MuScleFitUtils::massProb(), MuScleFitUtils::massResolution(), MuScleFitUtils::minuitLoop_, MuScleFitUtils::normalizationChanged_, MuScleFitUtils::normalizeLikelihoodByEventNumber_, MuScleFitUtils::oldNormalization_, MuScleFitUtils::ReducedSavedPair, MuScleFitUtils::rminPtr_, MuScleFitUtils::SavedPair, and CommonMethods::weight().

Referenced by pat::ElectronSelector::filter(), MuScleFitUtils::minimizeLikelihood(), and PFNuclearProducer::produce().

                                                                                            {

  if (MuScleFitUtils::debug>19) std::cout << "[MuScleFitUtils-likelihood]: In likelihood function" << std::endl;

  const lorentzVector * recMu1;
  const lorentzVector * recMu2;
  lorentzVector corrMu1;
  lorentzVector corrMu2;

  //   if (MuScleFitUtils::debug>19) {
  //     int parnumber = (int)(MuScleFitUtils::parResol.size()+MuScleFitUtils::parScale.size()+
  //                           MuScleFitUtils::parCrossSection.size()+MuScleFitUtils::parBgr.size());
  //     std::cout << "[MuScleFitUtils-likelihood]: Looping on tree with ";
  //     for (int ipar=0; ipar<parnumber; ipar++) {
  //       std::cout << "Parameter #" << ipar << " with value " << xval[ipar] << " ";
  //     }
  //     std::cout << std::endl;
  //   }

  // Loop on the tree
  // ----------------
  double flike = 0;
  int evtsinlik = 0;
  int evtsoutlik = 0;
  // std::cout << "SavedPair.size() = " << MuScleFitUtils::SavedPair.size() << std::endl;
  if( MuScleFitUtils::debug>0 ) {
    std::cout << "SavedPair.size() = " << MuScleFitUtils::SavedPair.size() << std::endl;
    std::cout << "ReducedSavedPair.size() = " << MuScleFitUtils::ReducedSavedPair.size() << std::endl;
  }
  // for( unsigned int nev=0; nev<MuScleFitUtils::SavedPair.size(); ++nev ) {
  for( unsigned int nev=0; nev<MuScleFitUtils::ReducedSavedPair.size(); ++nev ) {

    //     recMu1 = &(MuScleFitUtils::SavedPair[nev].first);
    //     recMu2 = &(MuScleFitUtils::SavedPair[nev].second);
    recMu1 = &(MuScleFitUtils::ReducedSavedPair[nev].first);
    recMu2 = &(MuScleFitUtils::ReducedSavedPair[nev].second);

    // Compute original mass
    // ---------------------
    double mass = MuScleFitUtils::invDimuonMass( *recMu1, *recMu2 );

    // Compute weight and reference mass (from original mass)
    // ------------------------------------------------------
    double weight = MuScleFitUtils::computeWeight(mass, MuScleFitUtils::iev_);
    if( weight!=0. ) {
      // Compute corrected mass (from previous biases) only if we are currently fitting the scale
      // ----------------------------------------------------------------------------------------
      if( MuScleFitUtils::doScaleFit[MuScleFitUtils::loopCounter] ) {
//      std::cout << "Original pt1 = " << corrMu1.Pt() << std::endl;
//      std::cout << "Original pt2 = " << corrMu2.Pt() << std::endl;
        corrMu1 = MuScleFitUtils::applyScale(*recMu1, xval, -1);
        corrMu2 = MuScleFitUtils::applyScale(*recMu2, xval,  1);
        
//         if( (corrMu1.Pt() != corrMu1.Pt()) || (corrMu2.Pt() != corrMu2.Pt()) ) {
//           std::cout << "Rescaled pt1 = " << corrMu1.Pt() << std::endl;
//           std::cout << "Rescaled pt2 = " << corrMu2.Pt() << std::endl;
//         }
//      std::cout << "Rescaled pt1 = " << corrMu1.Pt() << std::endl;
//      std::cout << "Rescaled pt2 = " << corrMu2.Pt() << std::endl;
      }
      else {
        corrMu1 = *recMu1;
        corrMu2 = *recMu2;

//         if( (corrMu1.Pt() != corrMu1.Pt()) || (corrMu2.Pt() != corrMu2.Pt()) ) {
//           std::cout << "Not rescaled pt1 = " << corrMu1.Pt() << std::endl;
//           std::cout << "Not rescaled pt2 = " << corrMu2.Pt() << std::endl;
//         }
      }
      double corrMass = MuScleFitUtils::invDimuonMass(corrMu1, corrMu2);
      double Y = (corrMu1+corrMu2).Rapidity();
      double resEta = (corrMu1+corrMu2).Eta();
      if( MuScleFitUtils::debug>19 ) {
        std::cout << "[MuScleFitUtils-likelihood]: Original/Corrected resonance mass = " << mass
             << " / " << corrMass << std::endl;
      }

      // Compute mass resolution
      // -----------------------
      double massResol = MuScleFitUtils::massResolution(corrMu1, corrMu2, xval);
      if (MuScleFitUtils::debug>19)
        std::cout << "[MuScleFitUtils-likelihood]: Resolution is " << massResol << std::endl;

      // Compute probability of this mass value including background modeling
      // --------------------------------------------------------------------
      if (MuScleFitUtils::debug>1) std::cout << "calling massProb inside likelihood function" << std::endl;

      double prob = MuScleFitUtils::massProb( corrMass, resEta, Y, massResol, xval );
      if (MuScleFitUtils::debug>1) std::cout << "likelihood:massProb = " << prob << std::endl;

      // Compute likelihood
      // ------------------
      if( prob>0 ) {
        // flike += log(prob*10000)*weight; // NNBB! x10000 to see if we can recover the problem of boundary
        flike += log(prob)*weight;
        evtsinlik += 1;  // NNBB test: see if likelihood per event is smarter (boundary problem)
      } else {
        if( MuScleFitUtils::debug > 0 ) {
          std::cout << "WARNING: corrMass = " << corrMass << " outside window, this will cause a discontinuity in the likelihood. Consider increasing the safety bands which are now set to 90% of the normalization window to avoid this problem" << std::endl;
          std::cout << "Original mass was = " << mass << std::endl;
          std::cout << "WARNING: massResol = " << massResol << " outside window" << std::endl;
        }
        evtsoutlik += 1;
      }
      if (MuScleFitUtils::debug>19)
        std::cout << "[MuScleFitUtils-likelihood]: Mass probability = " << prob << std::endl;
    } // weight!=0

  } // End of loop on tree events

//   // Protection for low statistic. If the likelihood manages to throw out all the signal
//   // events and stays with ~ 10 events in the resonance window it could have a better likelihood
//   // because of ~ uniformly distributed events (a random combination could be good and spoil the fit).
//   // We require that the number of events included in the fit does not change more than 5% in each minuit loop.
//   bool lowStatPenalty = false;
//   if( MuScleFitUtils::minuitLoop_ > 0 ) {
//     double newEventsOutInRatio = double(evtsinlik);
//     // double newEventsOutInRatio = double(evtsoutlik)/double(evtsinlik);
//     double ratio = newEventsOutInRatio/MuScleFitUtils::oldEventsOutInRatio_;
//     MuScleFitUtils::oldEventsOutInRatio_ = newEventsOutInRatio;
//     if( ratio < 0.8 || ratio > 1.2 ) {
//       std::cout << "Warning: too much change from oldEventsInLikelihood to newEventsInLikelihood, ratio is = " << ratio << std::endl;
//       std::cout << "oldEventsInLikelihood = " << MuScleFitUtils::oldEventsOutInRatio_ << ", newEventsInLikelihood = " << newEventsOutInRatio << std::endl;
//       lowStatPenalty = true;
//     }
//   }

  // It is a product of probabilities, we compare the sqrt_N of them. Thus N becomes a denominator of the logarithm.
  if( evtsinlik != 0 ) {

    if( MuScleFitUtils::normalizeLikelihoodByEventNumber_ ) {
      // && !(MuScleFitUtils::duringMinos_) ) {
      if( MuScleFitUtils::rminPtr_ == 0 ) {
        std::cout << "ERROR: rminPtr_ = " << MuScleFitUtils::rminPtr_ << ", code will crash" << std::endl;
      }
      double normalizationArg[] = {1/double(evtsinlik)};
      // Reset the normalizationArg only if it changed
      if( MuScleFitUtils::oldNormalization_ != normalizationArg[0] ) {
        int ierror = 0;
//         if( MuScleFitUtils::likelihoodInLoop_ != 0 ) {
//           // This condition is set only when minimizing. Later calls of hesse and minos will not change the value
//           // This is done to avoid minos being confused by changing the UP parameter during its computation.
//           MuScleFitUtils::rminPtr_->mnexcm("SET ERR", normalizationArg, 1, ierror);
//         }
        MuScleFitUtils::rminPtr_->mnexcm("SET ERR", normalizationArg, 1, ierror);
        std::cout << "oldNormalization = " << MuScleFitUtils::oldNormalization_ << " new = " << normalizationArg[0] << std::endl;
        MuScleFitUtils::oldNormalization_ = normalizationArg[0];
        MuScleFitUtils::normalizationChanged_ += 1;
      }
      fval = -2.*flike/double(evtsinlik);
      // fval = -2.*flike;
      //     if( lowStatPenalty ) {
      //       fval *= 100;
      //     }
    }
    else {
      fval = -2.*flike;
    }
  }
  else {
    std::cout << "Problem: Events in likelihood = " << evtsinlik << std::endl;
    fval = 999999999.;
  }
  // fval = -2.*flike;
  if (MuScleFitUtils::debug>19)
    std::cout << "[MuScleFitUtils-likelihood]: End tree loop with likelihood value = " << fval << std::endl;

//  #ifdef DEBUG

  if( MuScleFitUtils::minuitLoop_ < 10000 ) {
    if( MuScleFitUtils::likelihoodInLoop_ != 0 ) {
      ++MuScleFitUtils::minuitLoop_;
      MuScleFitUtils::likelihoodInLoop_->SetBinContent(MuScleFitUtils::minuitLoop_, fval);
    }
  }
  // else std::cout << "minuitLoop over 10000. Not filling histogram" << std::endl;

  if( MuScleFitUtils::debug > 0 ) {
    //     if( MuScleFitUtils::duringMinos_ ) {
    //       int parnumber = (int)(MuScleFitUtils::parResol.size()+MuScleFitUtils::parScale.size()+
    //                             MuScleFitUtils::parCrossSection.size()+MuScleFitUtils::parBgr.size());
    //       std::cout << "[MuScleFitUtils-likelihood]: Looping on tree with ";
    //       for (int ipar=0; ipar<parnumber; ipar++) {
    //         std::cout << "Parameter #" << ipar << " with value " << xval[ipar] << " ";
    //       }
    //       std::cout << std::endl;
    //       std::cout << "[MuScleFitUtils-likelihood]: likelihood value = " << fval << std::endl;
    //     }
    std::cout << "Events in likelihood = " << evtsinlik << std::endl;
    std::cout << "Events out likelihood = " << evtsoutlik << std::endl;
  }

//  #endif
}

Double_t lorentzianPeak	(	Double_t *	x,
		Double_t *	par
	)

See header file for a class description

Date:: 2010/10/22 17:58:33

Revision:: 1.46

Author:: S. Bolognesi - INFN Torino / T. Dorigo, M. De Mattia - INFN Padova

Definition at line 57 of file MuScleFitUtils.cc.

References siStripFEDMonitor_P5_cff::Max, and Pi.

Referenced by MuScleFitUtils::fitMass().

                                                     {
  return (0.5*par[0]*par[1]/TMath::Pi()) /
  TMath::Max(1.e-10,(x[0]-par[2])*(x[0]-par[2]) + .25*par[1]*par[1]);
}

Variable Documentation

double f[11][100]

Definition at line 79 of file MuScleFitUtils.cc.

double g[11][100]

Definition at line 80 of file MuScleFitUtils.cc.

TF1* GL

Initial value:

 new TF1 ("GL",
                    "0.5/3.1415926*[0]/(pow(x-[1],2)+pow(0.5*[0],2))*exp(-0.5*pow((x-[2])/[3],2))/([3]*sqrt(6.283185))",
                    0, 1000)

Definition at line 84 of file MuScleFitUtils.cc.

Referenced by MuScleFitUtils::massProb(), and MuScleFitBase::readProbabilityDistributionsFromFile().

TF2* GL2

Initial value:

 new TF2 ("GL2",
  "0.5/3.1415926*[0]/(pow(x-[1],2)+pow(0.5*[0],2))*exp(-0.5*pow((x-y)/[2],2))/([2]*sqrt(6.283185))",
  0, 200, 0, 200)

Definition at line 88 of file MuScleFitUtils.cc.

double isum

Definition at line 78 of file MuScleFitUtils.cc.

Referenced by SiPixelActionExecutor::fillFEDErrorSummary(), SiStripSummaryCreator::fillGrandSummaryHistos(), StorageAccount::fillSummary(), SiStripSummaryCreator::fillSummaryHistos(), and SiStripSummaryCreator::setSummaryMENames().

double mzsum

Definition at line 77 of file MuScleFitUtils.cc.

/data/doxygen/doxygen-1.7.3/gen/CMSSW_4_2_8/src/MuonAnalysis/MomentumScaleCalibration/src/MuScleFitUtils.cc File Reference

Functions

Variables

Function Documentation

Variable Documentation