#include <DTConfigTraco.h>

Inheritance diagram for DTConfigTraco:

Public Member Functions
int	BendingAngleCut () const
	Bending angle cut for all stations and triggers : KPRGCOM.
int	BTIC () const
	BTIC traco parameter: must be equal to Btis ST parameter.
int	DD () const
	DD traco parameter: this is fixed.
int	debug () const
	Debug flag.
	DTConfigTraco ()
	Constructor.
	DTConfigTraco (const edm::ParameterSet &ps)
	Constructor.
	DTConfigTraco (unsigned short int *buffer)
	Constructor from string.
int	IBTIOFF () const
	IBTIOFF traco parameter.
int	KRAD () const
	KRAD traco parameter.
int	LVALIDIFH () const
	Flag for Low validation parameter.
int	prefHtrig (int i) const
	Preference to HTRIG on first/second tracks: F(S)HTPRF.
int	prefInner (int i) const
	Preference to inner on first/second tracks: F(S)SLMSK.
void	print () const
	Print the setup.
void	setBendingAngleCut (int BendingAngleCut)
	Set Bending angle cut for all stations and triggers : KPRGCOM.
void	setBTIC (int BTIC)
	Set BTIC traco parameter: must be equal to Btis ST parameter.
void	setDD (int DD)
	Set DD traco parameter: this is fixed.
void	setDebug (int debug)
void	setDefaults (const edm::ParameterSet &ps)
	Set default parameters.
void	setIBTIOFF (int IBTIOFF)
	Set IBTIOFF traco parameter.
void	setKRAD (int KRAD)
	Set KRAD traco parameter.
void	setLVALIDIFH (int LVALIDIFH)
	Set Flag for Low validation parameter.
void	setPrefHtrig (int i, int prefHtrig)
	Set Preference to HTRIG on first/second tracks: F(S)HTPRF.
void	setPrefInner (int i, int prefInner)
	Set Preference to inner on first/second tracks: F(S)SLMSK.
void	setSingleHflag (int i, int singleHflag)
	Set Single HTRIG enabling on first/second tracks F(S)HTMSK.
void	setSingleLenab (int i, int singleLenab)
	Set Single LTRIG accept enabling on first/second tracks LTF.
void	setSingleLflag (int i, int singleLflag)
	Set Single LTRIG enabling on first/second tracks: F(S)LTMSK.
void	setSortKascend (int i, int sortKascend)
	Set Ascend. order for K sorting first/second tracks: F(S)HISM.
void	setTcBxLts (int TcBxLts)
	Set Suppr. of LTRIG in 4 BX before HTRIG: LTS.
void	setTcKToll (int i, int TcKToll)
	Set K tollerance for correlation in TRACO: F(S)PRGCOMP.
void	setTcReuse (int i, int TcReuse)
	Set Recycling of TRACO cand. in inner/outer SL : REUSEI/REUSEO.
void	setUsedBti (int bti, int mask)
	Set Connected bti in traco: bti mask.
int	singleHflag (int i) const
	Single HTRIG enabling on first/second tracks F(S)HTMSK.
int	singleLenab (int i) const
	Single LTRIG accept enabling on first/second tracks LTF.
int	singleLflag (int i) const
	Single LTRIG enabling on first/second tracks: F(S)LTMSK.
int	sortKascend (int i) const
	Ascend. order for K sorting first/second tracks: F(S)HISM.
int	TcBxLts () const
	Suppr. of LTRIG in 4 BX before HTRIG: LTS.
int	TcKToll (int i) const
	K tollerance for correlation in TRACO: F(S)PRGCOMP.
int	TcReuse (int i) const
	Recycling of TRACO cand. in inner/outer SL : REUSEI/REUSEO.
int	usedBti (int bti) const
	Connected bti in traco: bti mask.
	~DTConfigTraco ()
	Destructor.
Static Public Attributes
static const int	NMAXCAND
	Costant: maximum number of TRACO output candidates to TS.
static const int	RESOLPSI = 512
	Costants: esolution for psi and DeltaPsiR (phi_B)
static const int	RESOLPSIR = 4096
	Costant: resulution for psiR (phi)
Private Attributes
int8_t	m_btic
int8_t	m_dd
int8_t	m_debug
int8_t	m_fhism
int8_t	m_fhtmsk
int8_t	m_fhtprf
int8_t	m_fltmsk
int8_t	m_fprgcomp
int8_t	m_fslmsk
int8_t	m_ibtioff
int16_t	m_kprgcom
int8_t	m_krad
int8_t	m_ltf
int8_t	m_lts
int8_t	m_lvalidifh
int8_t	m_reusei
int8_t	m_reuseo
int8_t	m_shism
int8_t	m_shtmsk
int8_t	m_shtprf
int8_t	m_sltmsk
int8_t	m_sprgcomp
int8_t	m_sslmsk
BitArray< 16 >	m_trgenb

Detailed Description

Configurable parameters and constants for Level-1 Muon DT Trigger - Traco chip

Author:: S. Vanini

Definition at line 39 of file DTConfigTraco.h.

Constructor & Destructor Documentation

DTConfigTraco::DTConfigTraco ( const edm::ParameterSet & ps )

Constructor.

Definition at line 40 of file DTConfigTraco.cc.

References setDefaults().

                                                      { 

  setDefaults(ps);

}

DTConfigTraco::DTConfigTraco ( ) [inline]

Constructor.

Definition at line 55 of file DTConfigTraco.h.

{};

DTConfigTraco::DTConfigTraco ( unsigned short int * buffer )

Constructor from string.

Definition at line 46 of file DTConfigTraco.cc.

References gather_cfg::cout, createTree::dd, debug(), Exception, i, setBendingAngleCut(), setBTIC(), setDD(), setIBTIOFF(), setKRAD(), setLVALIDIFH(), setPrefHtrig(), setPrefInner(), setSingleHflag(), setSingleLenab(), setSingleLflag(), setSortKascend(), setTcBxLts(), setTcKToll(), setTcReuse(), setUsedBti(), and matplotRender::t.

                                                        {

        // check if this is a TRACO configuration string
        if (buffer[2]!=0x15){
                throw cms::Exception("DTTPG") << "===> ConfigTraco constructor : not a TRACO string!" << std::endl;
        }

        // decode
    unsigned short int memory_traco[38];

    for(int i=0;i<38;i++){
        memory_traco[i] = buffer[i+5];
        //std::cout << hex << memory_traco[i];
    }
    int btic = memory_traco[0] & 0x3f ;
    int rad = ( ( memory_traco[0] & 0xc0 ) >> 6 ) | ( ( memory_traco[1] & 0x7 ) << 2 ) ;
    int dd = ( memory_traco[1] & 0xf8 ) >> 3 ;
    int fprgcomp = memory_traco[2] & 0x3 ;
    int sprgcomp = memory_traco[3] & 0x3 ;
    int fhism = ( memory_traco[2] & 0x4 ) != 0 ;
    int fhtprf = ( memory_traco[2] & 0x8 ) != 0 ;
    int fslmsk = ( memory_traco[2] & 0x10 ) != 0 ;
    int fltmsk = ( memory_traco[2] & 0x20 ) != 0 ;
    int fhtmsk = ( memory_traco[2] & 0x40 ) != 0 ;
    int shism = ( memory_traco[3] & 0x4 ) != 0 ;
    int shtprf = ( memory_traco[3] & 0x8 ) != 0 ;
    int sslmsk = ( memory_traco[3] & 0x10 ) != 0 ;
    int sltmsk = ( memory_traco[3] & 0x20 ) != 0 ;
    int shtmsk = ( memory_traco[3] & 0x40 ) != 0 ;
    int reusei = ( memory_traco[2] & 0x80 ) != 0 ;
    int reuseo = ( memory_traco[3] & 0x80 ) != 0 ;
    int ltf = ( memory_traco[4] & 1 ) != 0 ;
    int lts = ( memory_traco[4] & 2 ) != 0 ;
    int prgdel = ( memory_traco[4] & 0x1c ) >> 2 ;
    int snapcor = ( memory_traco[4] & 0xe0 ) >> 5 ;
    int trgenb[16];
    for(int it=0; it<2; it++)
    {
        trgenb[0+it*8] = memory_traco[5+it] & 0x01; 
        trgenb[1+it*8] = (memory_traco[5+it] >> 1 ) & 0x01;
        trgenb[2+it*8] = (memory_traco[5+it] >> 1 ) & 0x01;
        trgenb[3+it*8] = (memory_traco[5+it] >> 1 ) & 0x01;
        trgenb[4+it*8] = (memory_traco[5+it] >> 1 ) & 0x01;
        trgenb[5+it*8] = (memory_traco[5+it] >> 1 ) & 0x01;
        trgenb[6+it*8] = (memory_traco[5+it] >> 1 ) & 0x01;
        trgenb[7+it*8] = (memory_traco[5+it] >> 1 ) & 0x01;
    }                   
    int trgadel = memory_traco[7] & 0x3 ;
    int ibtioff = ( memory_traco[7] & 0xfc ) >> 2 ;
    int kprgcom = ( memory_traco[8] & 0xff ) ;
    int testmode = ( memory_traco[9] & 1 ) != 0 ;
    int starttest = ( memory_traco[9] & 2 ) != 0 ;
    int prvsignmux = ( memory_traco[9] & 4 ) != 0 ;
    int lth = ( memory_traco[9] & 8 ) != 0 ;

    if(debug()==1)
    { 
        std::cout  << "btic=" << btic
              << " rad=" << rad
              << " dd=" << dd
              << " fprgcomp=" << fprgcomp
              << " sprgcomp=" << sprgcomp
              << " fhism=" << fhism
              << " fhtprf=" << fhtprf
              << " fslmsk=" << fslmsk
              << " fltmsk=" << fltmsk
              << " fhtmsk=" <<  fhtmsk
              << " shism=" <<  shism
              << " shtprf=" <<  shtprf
              << " sslmsk=" <<  sslmsk
              << " sltmsk=" <<  sltmsk
              << " shtmsk=" <<  shtmsk
              << " reusei=" <<  reusei
              << " reuseo=" <<  reuseo
              << " ltf=" <<  ltf
              << " lts=" <<  lts
              << " prgdel=" <<  prgdel
              << " snapcor=" <<  snapcor
              << " trgenb="; 
                for(int t=0; t<16; t++)
                        std::cout << trgenb[t] << " ";
              std::cout << " trgadel=" <<  trgadel
              << " ibtioff=" <<  ibtioff
              << " kprgcom=" <<  kprgcom
              << " testmode=" <<  testmode
              << " starttest=" <<  starttest
              << " prvsignmux=" <<  prvsignmux
              << " lth=" <<  lth << std::endl;

        }

        // set parameters
        setBTIC(btic);
        setKRAD(rad);
        setDD(dd);
        setTcKToll(0,fprgcomp);
        setTcKToll(1,sprgcomp);
        setSortKascend(0,fhism);
        setSortKascend(1,shism);
        setPrefHtrig(0,fhtprf);
        setPrefHtrig(1,shtprf);
        setPrefInner(0,fslmsk);
        setPrefInner(1,sslmsk);
        setSingleLflag(0,fltmsk);
        setSingleLflag(1,sltmsk);
        setSingleHflag(0,fhtmsk);
        setSingleHflag(1,shtmsk);
        setTcReuse(0,reusei);
        setTcReuse(1,reuseo);
        setSingleLenab(0,ltf);
        setSingleLenab(1,ltf);
        setTcBxLts(lts);
        setIBTIOFF(ibtioff);
        setBendingAngleCut(kprgcom);
        setLVALIDIFH(lth);
        for(int t=0; t<16; t++)
                setUsedBti(t+1,trgenb[t]);
        
        // the following are not relevant for simulation
        // prgdel, snapcor, trgadel, testmode, starttest, prvsignmux
}

DTConfigTraco::~DTConfigTraco ( )

Destructor.

Definition at line 171 of file DTConfigTraco.cc.

{}

Member Function Documentation

int DTConfigTraco::BendingAngleCut ( ) const [inline]

Bending angle cut for all stations and triggers : KPRGCOM.

Definition at line 148 of file DTConfigTraco.h.

References m_kprgcom.

Referenced by DTTracoChip::insideAngWindow(), print(), and setBendingAngleCut().

{ return m_kprgcom; }

int DTConfigTraco::BTIC ( ) const [inline]

BTIC traco parameter: must be equal to Btis ST parameter.

Definition at line 73 of file DTConfigTraco.h.

References m_btic.

Referenced by DTTracoChip::DTTracoChip(), print(), setBTIC(), and DTTracoChip::setTracoAcceptances().

{ return m_btic;}

int DTConfigTraco::DD ( ) const [inline]

DD traco parameter: this is fixed.

Definition at line 76 of file DTConfigTraco.h.

References m_dd.

Referenced by print(), and setDD().

{ return m_dd;}

int DTConfigTraco::debug ( ) const [inline]

Debug flag.

Definition at line 67 of file DTConfigTraco.h.

References m_debug.

Referenced by DTTracoChip::add_btiT(), DTTracoChip::bestCand(), DTConfigTraco(), print(), DTTracoChip::run(), setDebug(), DTTracoChip::storeCorr(), and DTTracoChip::storeUncorr().

{ return m_debug; }

int DTConfigTraco::IBTIOFF ( ) const [inline]

IBTIOFF traco parameter.

Definition at line 145 of file DTConfigTraco.h.

References m_ibtioff.

Referenced by print(), and setIBTIOFF().

{ return m_ibtioff; }

int DTConfigTraco::KRAD ( ) const [inline]

KRAD traco parameter.

Definition at line 70 of file DTConfigTraco.h.

References m_krad.

Referenced by DTTracoChip::DTTracoChip(), print(), and setKRAD().

{ return m_krad;}

int DTConfigTraco::LVALIDIFH ( ) const [inline]

Flag for Low validation parameter.

Definition at line 151 of file DTConfigTraco.h.

References m_lvalidifh.

Referenced by print(), setLVALIDIFH(), and DTTracoChip::storeUncorr().

{ return m_lvalidifh;}

int DTConfigTraco::prefHtrig ( int i ) const [inline]

Preference to HTRIG on first/second tracks: F(S)HTPRF.

Definition at line 111 of file DTConfigTraco.h.

References m_fhtprf, and m_shtprf.

Referenced by DTTracoChip::bestCand(), print(), and setPrefHtrig().

                                    {
    if(i==0)
      return m_fhtprf;
    else
      return m_shtprf;
  }

int DTConfigTraco::prefInner ( int i ) const [inline]

Preference to inner on first/second tracks: F(S)SLMSK.

Definition at line 103 of file DTConfigTraco.h.

References m_fslmsk, and m_sslmsk.

Referenced by print(), setPrefInner(), DTTracoChip::setPV(), and DTTracoChip::storeUncorr().

                                     {
    if(i==0)
      return m_fslmsk;
    else
      return m_sslmsk;
  }

void DTConfigTraco::print ( void ) const

Print the setup.

Definition at line 250 of file DTConfigTraco.cc.

References b, BendingAngleCut(), BTIC(), gather_cfg::cout, DD(), debug(), IBTIOFF(), KRAD(), LVALIDIFH(), prefHtrig(), prefInner(), singleHflag(), singleLenab(), singleLflag(), sortKascend(), TcBxLts(), TcKToll(), TcReuse(), and usedBti().

                           {
  std::cout << "******************************************************************************" << std::endl;
  std::cout << "*              DTTrigger configuration : TRACO chips                                 *" << std::endl;
  std::cout << "******************************************************************************" << std::endl;
  std::cout << "*                                                                            *" << std::endl;
  std::cout << "Debug flag : " << debug()  << std::endl;
  std::cout << "KRAD traco parameter : " << KRAD() << std::endl;
  std::cout << "BTIC traco parameter : " << BTIC() << std::endl;
  std::cout << "DD traco parameter : " << DD() << std::endl;
  std::cout << "REUSEI, REUSEO : " << TcReuse(0) << ", " << TcReuse(1) << std::endl;
  std::cout << "FHTMSK, SHTMSK : " << singleHflag(0) << ", " << singleHflag(1) << std::endl;
  std::cout << "FLTMSK, SLTMSK: " << singleLflag(0) << ", " << singleLflag(1) << std::endl;
  std::cout << "FSLMSK, SSLMSK : " << prefInner(0) << ", " << prefInner(1) << std::endl;
  std::cout << "FHTPRF, SHTPRF : " << prefHtrig(0) << ", " << prefHtrig(1) << std::endl;
  std::cout << "FHISM, SHISM : " << sortKascend(0) << ", " << sortKascend(1) << std::endl;
  std::cout << "FPRGCOMP, SPRGCOMP : " << TcKToll(0) << ", " << TcKToll(1) << std::endl;
  std::cout << "LTS : " << TcBxLts() << std::endl;
  std::cout << "LTF : " << singleLenab(0) << std::endl;
  std::cout << "Connected bti in traco - bti mask : ";
  for(int b=1; b<=16; b++)
        std::cout << usedBti(b) << " "; 
  std::cout << std::endl;
  std::cout << "IBTIOFF : " << IBTIOFF() << std::endl;
  std::cout << "bending angle cut : " << BendingAngleCut() << std::endl;
  std::cout << "flag for Low validation parameter : " << LVALIDIFH() << std::endl;
  std::cout << "******************************************************************************" << std::endl;

}

void DTConfigTraco::setBendingAngleCut ( int BendingAngleCut ) [inline]

Set Bending angle cut for all stations and triggers : KPRGCOM.

Definition at line 236 of file DTConfigTraco.h.

References BendingAngleCut(), and m_kprgcom.

Referenced by DTConfigTraco().

{ m_kprgcom=BendingAngleCut; }

void DTConfigTraco::setBTIC ( int BTIC ) [inline]

Set BTIC traco parameter: must be equal to Btis ST parameter.

Definition at line 161 of file DTConfigTraco.h.

References BTIC(), and m_btic.

Referenced by DTConfigTraco().

{ m_btic=BTIC;}

void DTConfigTraco::setDD ( int DD ) [inline]

Set DD traco parameter: this is fixed.

Definition at line 164 of file DTConfigTraco.h.

References DD(), and m_dd.

Referenced by DTConfigTraco().

{ m_dd=DD;}

void DTConfigTraco::setDebug ( int debug ) [inline]

Set single parameter functions Set debug flag

Definition at line 155 of file DTConfigTraco.h.

References debug(), and m_debug.

Referenced by DTConfigDBProducer::readDTCCBConfig().

{ m_debug=debug; }

void DTConfigTraco::setDefaults ( const edm::ParameterSet & ps )

Set default parameters.

Definition at line 178 of file DTConfigTraco.cc.

References b, edm::ParameterSet::getParameter(), edm::ParameterSet::getUntrackedParameter(), label, m_btic, m_dd, m_debug, m_fhism, m_fhtmsk, m_fhtprf, m_fltmsk, m_fprgcomp, m_fslmsk, m_ibtioff, m_kprgcom, m_krad, m_ltf, m_lts, m_lvalidifh, m_reusei, m_reuseo, m_shism, m_shtmsk, m_shtprf, m_sltmsk, m_sprgcomp, m_sslmsk, m_trgenb, p1, and BitArray< N >::set().

Referenced by DTConfigTraco().

                                                    {

  // Debug flag 
  m_debug = ps.getUntrackedParameter<int>("Debug");

  // KRAD traco parameter
  m_krad = ps.getParameter<int>("KRAD");

  // BTIC traco parameter
  m_btic = ps.getParameter<int>("BTIC");
 
  // DD traco parameter: this is fixed
  m_dd = ps.getParameter<int>("DD");

  // recycling of TRACO cand. in inner/outer SL : REUSEI/REUSEO
  m_reusei = ps.getParameter<int>("REUSEI");
  m_reuseo = ps.getParameter<int>("REUSEO");

  // single HTRIG enabling on first/second tracks F(S)HTMSK
  m_fhtmsk = ps.getParameter<int>("FHTMSK");
  m_shtmsk = ps.getParameter<int>("SHTMSK");

  // single LTRIG enabling on first/second tracks: F(S)LTMSK
  m_fltmsk = ps.getParameter<int>("FLTMSK");
  m_sltmsk = ps.getParameter<int>("SLTMSK");

  // preference to inner on first/second tracks: F(S)SLMSK
  m_fslmsk = ps.getParameter<int>("FSLMSK");
  m_sslmsk = ps.getParameter<int>("SSLMSK");

  // preference to HTRIG on first/second tracks: F(S)HTPRF
  m_fhtprf = ps.getParameter<int>("FHTPRF");
  m_shtprf = ps.getParameter<int>("SHTPRF");

  // ascend. order for K sorting first/second tracks: F(S)HISM
  m_fhism = ps.getParameter<int>("FHISM");
  m_shism = ps.getParameter<int>("SHISM");

  // K tollerance for correlation in TRACO: F(S)PRGCOMP
  m_fprgcomp = ps.getParameter<int>("FPRGCOMP");
  m_sprgcomp = ps.getParameter<int>("SPRGCOMP");

  // suppr. of LTRIG in 4 BX before HTRIG: LTS
  m_lts = ps.getParameter<int>("LTS");

  // single LTRIG accept enabling on first/second tracks LTF
  m_ltf = ps.getParameter<int>("LTF");

  // Connected bti in traco: bti mask
  for(int b=0; b<16; b++)
  {
        std::string label = "TRGENB";
        char p0 = (b/10)+'0';
        char p1 = (b%10)+'0';
        if ( p0 != '0' )
                label = label + p0;
        label = label + p1;
        
        m_trgenb.set(b,ps.getParameter<int>(label));
  }

  // IBTIOFF traco parameter
  m_ibtioff = ps.getParameter<int>("IBTIOFF");

  // bending angle cut for all stations and triggers : KPRGCOM
  m_kprgcom = ps.getParameter<int>("KPRGCOM");
 
  // flag for Low validation parameter
  m_lvalidifh =  ps.getParameter<int>("LVALIDIFH");
}

void DTConfigTraco::setIBTIOFF ( int IBTIOFF ) [inline]

Set IBTIOFF traco parameter.

Definition at line 233 of file DTConfigTraco.h.

References IBTIOFF(), and m_ibtioff.

Referenced by DTConfigTraco().

{ m_ibtioff=IBTIOFF; }

void DTConfigTraco::setKRAD ( int KRAD ) [inline]

Set KRAD traco parameter.

Definition at line 158 of file DTConfigTraco.h.

References KRAD(), and m_krad.

Referenced by DTConfigTraco().

{ m_krad=KRAD;}

void DTConfigTraco::setLVALIDIFH ( int LVALIDIFH ) [inline]

Set Flag for Low validation parameter.

Definition at line 239 of file DTConfigTraco.h.

References LVALIDIFH(), and m_lvalidifh.

Referenced by DTConfigTraco().

{ m_lvalidifh=LVALIDIFH;}

void DTConfigTraco::setPrefHtrig	(	int	i,
		int	prefHtrig
	)		`[inline]`

Set Preference to HTRIG on first/second tracks: F(S)HTPRF.

Definition at line 199 of file DTConfigTraco.h.

References m_fhtprf, m_shtprf, and prefHtrig().

Referenced by DTConfigTraco().

                                                 {
    if(i==0)
      m_fhtprf=prefHtrig;
    else
      m_shtprf=prefHtrig;
  }

void DTConfigTraco::setPrefInner	(	int	i,
		int	prefInner
	)		`[inline]`

Set Preference to inner on first/second tracks: F(S)SLMSK.

Definition at line 191 of file DTConfigTraco.h.

References m_fslmsk, m_sslmsk, and prefInner().

Referenced by DTConfigTraco().

                                                 {
    if(i==0)
      m_fslmsk=prefInner;
    else
      m_sslmsk=prefInner;
  }

void DTConfigTraco::setSingleHflag	(	int	i,
		int	singleHflag
	)		`[inline]`

Set Single HTRIG enabling on first/second tracks F(S)HTMSK.

Definition at line 175 of file DTConfigTraco.h.

References m_fhtmsk, m_shtmsk, and singleHflag().

Referenced by DTConfigTraco().

                                                     {
    if(i==0)
      m_fhtmsk=singleHflag;
    else
      m_shtmsk=singleHflag;
  }

void DTConfigTraco::setSingleLenab	(	int	i,
		int	singleLenab
	)		`[inline]`

Set Single LTRIG accept enabling on first/second tracks LTF.

Definition at line 227 of file DTConfigTraco.h.

References m_ltf, and singleLenab().

Referenced by DTConfigTraco().

{ m_ltf=singleLenab; }

void DTConfigTraco::setSingleLflag	(	int	i,
		int	singleLflag
	)		`[inline]`

Set Single LTRIG enabling on first/second tracks: F(S)LTMSK.

Definition at line 183 of file DTConfigTraco.h.

References m_fltmsk, m_sltmsk, and singleLflag().

Referenced by DTConfigTraco().

                                                     {
    if(i==0)
      m_fltmsk=singleLflag;
    else
      m_sltmsk=singleLflag;
  }

void DTConfigTraco::setSortKascend	(	int	i,
		int	sortKascend
	)		`[inline]`

Set Ascend. order for K sorting first/second tracks: F(S)HISM.

Definition at line 207 of file DTConfigTraco.h.

References m_fhism, m_shism, and sortKascend().

Referenced by DTConfigTraco().

                                                     {
    if(i==0)
      m_fhism=sortKascend;
    else
      m_shism=sortKascend;
  }

void DTConfigTraco::setTcBxLts ( int TcBxLts ) [inline]

Set Suppr. of LTRIG in 4 BX before HTRIG: LTS.

Definition at line 224 of file DTConfigTraco.h.

References m_lts, and TcBxLts().

Referenced by DTConfigTraco().

{ m_lts=TcBxLts; }

void DTConfigTraco::setTcKToll	(	int	i,
		int	TcKToll
	)		`[inline]`

Set K tollerance for correlation in TRACO: F(S)PRGCOMP.

Definition at line 216 of file DTConfigTraco.h.

References m_fprgcomp, m_sprgcomp, and TcKToll().

Referenced by DTConfigTraco().

                                             {
    if(i==0)
      m_fprgcomp=TcKToll;
    else
      m_sprgcomp=TcKToll;
  }

void DTConfigTraco::setTcReuse	(	int	i,
		int	TcReuse
	)		`[inline]`

Set Recycling of TRACO cand. in inner/outer SL : REUSEI/REUSEO.

Definition at line 167 of file DTConfigTraco.h.

References m_reusei, m_reuseo, and TcReuse().

Referenced by DTConfigTraco().

                                              {
    if(i==0)
      m_reusei=TcReuse;
    else
      m_reuseo=TcReuse;
  }

void DTConfigTraco::setUsedBti	(	int	bti,
		int	mask
	)		`[inline]`

Set Connected bti in traco: bti mask.

Definition at line 230 of file DTConfigTraco.h.

References m_trgenb, and BitArray< N >::set().

Referenced by DTConfigTraco().

{ m_trgenb.set(bti-1,mask); }

int DTConfigTraco::singleHflag ( int i ) const [inline]

Single HTRIG enabling on first/second tracks F(S)HTMSK.

Definition at line 87 of file DTConfigTraco.h.

References m_fhtmsk, and m_shtmsk.

Referenced by print(), and setSingleHflag().

                                      {
    if(i==0)
      return m_fhtmsk;
    else
      return m_shtmsk;
  }

int DTConfigTraco::singleLenab ( int i ) const [inline]

Single LTRIG accept enabling on first/second tracks LTF.

Definition at line 139 of file DTConfigTraco.h.

References m_ltf.

Referenced by print(), setSingleLenab(), and DTTracoChip::storeUncorr().

{ return m_ltf; }

int DTConfigTraco::singleLflag ( int i ) const [inline]

Single LTRIG enabling on first/second tracks: F(S)LTMSK.

Definition at line 95 of file DTConfigTraco.h.

References m_fltmsk, and m_sltmsk.

Referenced by print(), setSingleLflag(), and DTTracoChip::storeUncorr().

                                       {
    if(i==0)
      return m_fltmsk;
    else
      return m_sltmsk;
  }

int DTConfigTraco::sortKascend ( int i ) const [inline]

Ascend. order for K sorting first/second tracks: F(S)HISM.

Definition at line 119 of file DTConfigTraco.h.

References m_fhism, and m_shism.

Referenced by DTTracoChip::bestCand(), print(), and setSortKascend().

                                      {
    if(i==0)
      return m_fhism;
    else
      return m_shism;
  }

int DTConfigTraco::TcBxLts ( ) const [inline]

Suppr. of LTRIG in 4 BX before HTRIG: LTS.

Definition at line 136 of file DTConfigTraco.h.

References m_lts.

Referenced by print(), setTcBxLts(), and DTTracoChip::storeCorr().

{ return m_lts; }

int DTConfigTraco::TcKToll ( int i ) const [inline]

K tollerance for correlation in TRACO: F(S)PRGCOMP.

Definition at line 128 of file DTConfigTraco.h.

References m_fprgcomp, and m_sprgcomp.

Referenced by print(), setTcKToll(), and DTTracoChip::storeCorr().

                                   {
    if(i==0)
      return m_fprgcomp;
    else
      return m_sprgcomp;
  }

int DTConfigTraco::TcReuse ( int i ) const [inline]

Recycling of TRACO cand. in inner/outer SL : REUSEI/REUSEO.

Definition at line 79 of file DTConfigTraco.h.

References m_reusei, and m_reuseo.

Referenced by print(), setTcReuse(), and DTTracoChip::storeUncorr().

                                   {
    if(i==0)
      return m_reusei;
    else
      return m_reuseo;
  }

int DTConfigTraco::usedBti ( int bti ) const [inline]

Connected bti in traco: bti mask.

Definition at line 142 of file DTConfigTraco.h.

References BitArray< N >::element(), and m_trgenb.

Referenced by print().

{ return m_trgenb.element(bti-1); }

Member Data Documentation

int8_t DTConfigTraco::m_btic [private]

Definition at line 253 of file DTConfigTraco.h.

Referenced by BTIC(), setBTIC(), and setDefaults().

int8_t DTConfigTraco::m_dd [private]

Definition at line 254 of file DTConfigTraco.h.

Referenced by DD(), setDD(), and setDefaults().

int8_t DTConfigTraco::m_debug [private]

Definition at line 251 of file DTConfigTraco.h.

Referenced by debug(), setDebug(), and setDefaults().

int8_t DTConfigTraco::m_fhism [private]

Definition at line 265 of file DTConfigTraco.h.

Referenced by setDefaults(), setSortKascend(), and sortKascend().

int8_t DTConfigTraco::m_fhtmsk [private]

Definition at line 257 of file DTConfigTraco.h.

Referenced by setDefaults(), setSingleHflag(), and singleHflag().

int8_t DTConfigTraco::m_fhtprf [private]

Definition at line 263 of file DTConfigTraco.h.

Referenced by prefHtrig(), setDefaults(), and setPrefHtrig().

int8_t DTConfigTraco::m_fltmsk [private]

Definition at line 259 of file DTConfigTraco.h.

Referenced by setDefaults(), setSingleLflag(), and singleLflag().

int8_t DTConfigTraco::m_fprgcomp [private]

Definition at line 267 of file DTConfigTraco.h.

Referenced by setDefaults(), setTcKToll(), and TcKToll().

int8_t DTConfigTraco::m_fslmsk [private]

Definition at line 261 of file DTConfigTraco.h.

Referenced by prefInner(), setDefaults(), and setPrefInner().

int8_t DTConfigTraco::m_ibtioff [private]

Definition at line 272 of file DTConfigTraco.h.

Referenced by IBTIOFF(), setDefaults(), and setIBTIOFF().

int16_t DTConfigTraco::m_kprgcom [private]

Definition at line 273 of file DTConfigTraco.h.

Referenced by BendingAngleCut(), setBendingAngleCut(), and setDefaults().

int8_t DTConfigTraco::m_krad [private]

Definition at line 252 of file DTConfigTraco.h.

Referenced by KRAD(), setDefaults(), and setKRAD().

int8_t DTConfigTraco::m_ltf [private]

Definition at line 270 of file DTConfigTraco.h.

Referenced by setDefaults(), setSingleLenab(), and singleLenab().

int8_t DTConfigTraco::m_lts [private]

Definition at line 269 of file DTConfigTraco.h.

Referenced by setDefaults(), setTcBxLts(), and TcBxLts().

int8_t DTConfigTraco::m_lvalidifh [private]

Definition at line 274 of file DTConfigTraco.h.

Referenced by LVALIDIFH(), setDefaults(), and setLVALIDIFH().

int8_t DTConfigTraco::m_reusei [private]

Definition at line 255 of file DTConfigTraco.h.

Referenced by setDefaults(), setTcReuse(), and TcReuse().

int8_t DTConfigTraco::m_reuseo [private]

Definition at line 256 of file DTConfigTraco.h.

Referenced by setDefaults(), setTcReuse(), and TcReuse().

int8_t DTConfigTraco::m_shism [private]

Definition at line 266 of file DTConfigTraco.h.

Referenced by setDefaults(), setSortKascend(), and sortKascend().

int8_t DTConfigTraco::m_shtmsk [private]

Definition at line 258 of file DTConfigTraco.h.

Referenced by setDefaults(), setSingleHflag(), and singleHflag().

int8_t DTConfigTraco::m_shtprf [private]

Definition at line 264 of file DTConfigTraco.h.

Referenced by prefHtrig(), setDefaults(), and setPrefHtrig().

int8_t DTConfigTraco::m_sltmsk [private]

Definition at line 260 of file DTConfigTraco.h.

Referenced by setDefaults(), setSingleLflag(), and singleLflag().

int8_t DTConfigTraco::m_sprgcomp [private]

Definition at line 268 of file DTConfigTraco.h.

Referenced by setDefaults(), setTcKToll(), and TcKToll().

int8_t DTConfigTraco::m_sslmsk [private]

Definition at line 262 of file DTConfigTraco.h.

Referenced by prefInner(), setDefaults(), and setPrefInner().

BitArray<16> DTConfigTraco::m_trgenb [private]

Definition at line 271 of file DTConfigTraco.h.

Referenced by setDefaults(), setUsedBti(), and usedBti().

const int DTConfigTraco::NMAXCAND [static]

Costant: maximum number of TRACO output candidates to TS.

Definition at line 48 of file DTConfigTraco.h.

const int DTConfigTraco::RESOLPSI = 512 [static]

Costants: esolution for psi and DeltaPsiR (phi_B)

Definition at line 44 of file DTConfigTraco.h.

Referenced by DTTracoChip::calculateAngles(), and CSCTFDTReceiver::process().

const int DTConfigTraco::RESOLPSIR = 4096 [static]

Costant: resulution for psiR (phi)

Definition at line 46 of file DTConfigTraco.h.

Referenced by DTTracoChip::calculateAngles().

DTConfigTraco Class Reference

Public Member Functions

Static Public Attributes

Private Attributes

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation