DTBtiCard.cc

Go to the documentation of this file.

//-------------------------------------------------
//
//   Class: DTBtiCard
//
//   Description: Contains active DTBtiChips
//
//
//   Author List:
//   C. Grandi
//   Modifications:
//   S. Vanini
//   22/VI/04 SV: last trigger code update - digi offset subtracted from digi time
//   III/05 SV  : NEWGEO : trigger in new geometry !
//   05/II/07 SV : new DTConfig update
//   30/III/07 SV : config with DTConfigManager every single chip
//----------------------------------------------------------------

//-----------------------
// This Class's Header --
//-----------------------
#include "L1Trigger/DTBti/interface/DTBtiCard.h"

//-------------------------------
// Collaborating Class Headers --
//-------------------------------
#include "DataFormats/GeometryVector/interface/LocalPoint.h"
#include "DataFormats/GeometryVector/interface/LocalVector.h"
#include "L1Trigger/DTBti/interface/DTBtiChip.h"
#include "L1Trigger/DTBti/interface/DTBtiTrig.h"

#include "FWCore/Framework/interface/Event.h"
#include "FWCore/ParameterSet/interface/ParameterSet.h"
#include "DataFormats/Common/interface/Handle.h"

#include "Geometry/DTGeometry/interface/DTGeometry.h"
#include "Geometry/Records/interface/MuonGeometryRecord.h"
#include "Geometry/DTGeometry/interface/DTLayer.h"
#include "Geometry/DTGeometry/interface/DTChamber.h"

#include "DataFormats/MuonDetId/interface/DTChamberId.h"
#include "DataFormats/MuonDetId/interface/DTLayerId.h"
#include "DataFormats/MuonDetId/interface/DTSuperLayerId.h"
#include "DataFormats/MuonDetId/interface/DTWireId.h"
#include "DataFormats/DTDigi/interface/DTDigiCollection.h"

//---------------
// C++ Headers --
//---------------
#include <iostream>
#include <cmath>
#include <utility>
#include <vector>

using namespace edm;

//----------------
// Constructors --
//----------------

DTBtiCard::DTBtiCard(DTTrigGeom* geom) : DTGeomSupplier(geom) {
  //_configBti = new DTConfigBti(bti_pset);
  //_configBti->print();

  //DTChamberId sid = ChamberId();
  //_conf_bti_map = conf_manager->getDTConfigBtiMap(sid);
  //_debug = conf_manager->getDTTPGDebug();

  //_finedelay   = conf_manager->getDTConfigTrigUnit(sid)->MCSetupTime();
  //_MCdelay     = conf_manager->getDTConfigTrigUnit(sid)->MCDigiOffset();
}

//--------------
// Destructor --
//--------------

DTBtiCard::~DTBtiCard() {
  localClear();
  //delete _conf_Bti;
}

//--------------
// Operations --
//--------------

void DTBtiCard::clearCache() {
  BTICache::clearCache();
  localClear();
}

void DTBtiCard::setConfig(const DTConfigManager* conf) {
  DTChamberId sid = ChamberId();
  _conf_bti_map = conf->getDTConfigBtiMap(sid);
  _debug = conf->getDTTPGDebug();
  _pedestals = conf->getDTConfigPedestals();

  // get bti acceptance flag
  _flag_acc = conf->useAcceptParam();
}

void DTBtiCard::localClear() {
  // Clear the maps
  for (int i = 0; i < 3; i++) {
    for (BTI_iter p = _btimap[i].begin(); p != _btimap[i].end(); p++) {
      delete (*p).second;
    }
    _btimap[i].clear();
  }

  //clear digis
  std::vector<DTDigi*>::const_iterator p;
  for (p = _digis.begin(); p < _digis.end(); p++)
    delete (*p);
  _digis.clear();
}

// void
// //DTBtiCard::loadBTI() {
// DTBtiCard::loadBTI(const DTDigiCollection dtDigis) {

//   localClear();

//    int ndigis = stat()->ndigis();

// // /*
// //   //SV version for tb2003 data
// //   // loop over chambers, superlayers and layers
// //   DTBXSetUp* setup = Singleton<DTBXSetUp>::instance();
// //   DTDetectorMap* detMap = setup->chamberMap();
// //   std::vector<DTChamber*> chambers = detMap->chambers();
// //   DTDetectorMap::ChamIter stat;
// //   for ( stat = chambers.begin(); stat != chambers.end(); stat++ ) {
// // */

// //   // Get DTDigi's from DTChamber  (stat is DTChamber*)
// //   // Loop over all Digis and make a local copy
// //   // Store a pointer to them in the relevant DTBtiChip's

//   if(ndigis){

//     if(debug()){
//       std::cout << "====================================================" << std::endl;
//       std::cout <<  ndigis << " DIGIS in  wheel " << wheel() <<
//               " station " << station() <<
//               " sector "  << sector() << std::endl;
//     }

//     std::vector<DTDigi> digi_container = stat()->digis();
//     std::vector<DTDigi>::const_iterator       digi_iter;

//     for(digi_iter=digi_container.begin(); digi_iter<digi_container.end(); digi_iter++){

//     /*Testbeam 2004 specific code
//     //digi.time in ns; digi.countsTDC in tdcunits
//     //float tdrift = (*digi_iter).time()-1.0*DTDigiParameters::offset;
//     //TB2004 version: no offset subtraction because digi are already t0 off!!!!
//     //tdrift must be float, otherwise DTDigi constructor assumes tdcunits!
//     //add chamber specific delay
//     int tdctime = (*digi_iter).countsTDC();
//     int mcdelay = (stat()->id().station()==1) ? config()->SetupTimeMB1() : config()->SetupTimeMB
// 3();
//     tdctime += mcdelay;
//     */
//       float tdrift = (*digi_iter).time()-1.0*DTDigiParameters::offset;
//       DTWireId idwire( wheel(), station(), sector(), (*digi_iter).slayer(),
//                         (*digi_iter).layer(), (*digi_iter).wire() );

// /*
//   //NEWGEO TEST: sw testpulse for testing new geometry in wire 1 of each sl
//   for(int l=0;l<12;l++){
//     int sl = int(l/4.) + 1;
//     if(station()!=4 || sl!=2){
//     int lay = int(fmod(l,4.)) + 1;
//     int wire = 2*sector();
//     if(geom()->posFE(sl)==0 || station()==1 || sl==2)
//       wire += lay==4? 1:2;
//     else if(geom()->posFE(sl)==1)
//       wire += lay==3? 3:2;

//     //int wire = 1;
//     //tmax=400ns, straight tracks in middle : 200ns (float for ns, int for tdc_counts)
//     //float tdrift = 187.5;
//     float tdrift = 200.0;
//     DTWireId idwire( wheel(), station(), sector(), sl, lay, wire);
// */

//       DTDigi* pdigi = new DTDigi(idwire,tdrift);
//       _digis.push_back(const_cast<DTDigi*>(pdigi));

//       if(debug())
//         pdigi->print();

//       int sln = pdigi->slayer();
//       int layn = pdigi->layer();
//       int tube = pdigi->wire();

//       // map in FE channel number:
//       int nch = geom()->mapTubeInFEch(sln,layn,tube);

//       // assign ch numbers to btis: depends on layer staggering!
//       int nbti = nch + geom()->layerFEStaggering(sln,layn);

//       if(debug()){
//         std::cout << "FE ch " << nch;
//         std::cout << " of bti " << nbti;
//         std::cout << " staggering " <<  geom()->layerFEStaggering(sln,layn);
//         std::cout << " now nbti is " << nch;
//         std::cout << " SL phi offset " << geom()->phiSLOffset() << std::endl;
//       }

//       switch(layn) {
//       case 1:
//         if(activeGetBTI(sln, nbti  )) activeGetBTI(sln, nbti  )->add_digi(4, pdigi);
//         if(activeGetBTI(sln, nbti-1)) activeGetBTI(sln, nbti-1)->add_digi(8, pdigi);
//       break;
//       case 2:
//         if(activeGetBTI(sln, nbti  )) activeGetBTI(sln, nbti  )->add_digi(2, pdigi);
//         if(activeGetBTI(sln, nbti-1)) activeGetBTI(sln, nbti-1)->add_digi(6, pdigi);
//       break;
//       case 3:
//         if(activeGetBTI(sln, nbti  )) activeGetBTI(sln, nbti  )->add_digi(3, pdigi);
//         if(activeGetBTI(sln, nbti-1)) activeGetBTI(sln, nbti-1)->add_digi(7, pdigi);
//       break;
//       case 4:
//         if(activeGetBTI(sln, nbti  )) activeGetBTI(sln, nbti  )->add_digi(1, pdigi);
//         if(activeGetBTI(sln, nbti-1)) activeGetBTI(sln, nbti-1)->add_digi(5, pdigi);
//         if(activeGetBTI(sln, nbti-2)) activeGetBTI(sln, nbti-2)->add_digi(9, pdigi);
//       break;
//       }
//     }//end loop on digi

//     if(debug())
//       std::cout << "====================================================" << std::endl;

//   }//end if(ndigis)
// }

void DTBtiCard::loadBTI(const DTDigiCollection dtDigis) {
  localClear();

  if (debug()) {
    std::cout << "DTBtiCard::loadBTI called for wheel=" << wheel();
    std::cout << ", station=" << station();
    std::cout << ", sector=" << sector() << std::endl;
  }

  DTDigiCollection::DigiRangeIterator detUnitIt;
  for (detUnitIt = dtDigis.begin(); detUnitIt != dtDigis.end(); ++detUnitIt) {
    const DTLayerId& id = (*detUnitIt).first;
    const DTDigiCollection::Range& range = (*detUnitIt).second;

    // DTLayerId print-out
    if (debug()) {
      std::cout << "--------------" << std::endl;
      std::cout << "id: " << id;
    }

    // Loop over the digis of this DetUnit
    for (DTDigiCollection::const_iterator digiIt = range.first; digiIt != range.second; ++digiIt) {
      int tube = (*digiIt).wire();
      const DTWireId tubeid(id, tube);
      float tdrift = (*digiIt).time() - _pedestals->getOffset(tubeid);

      if (debug()) {
        std::cout << " digi time : " << (*digiIt).time();
        std::cout << " pedestal offset : " << _pedestals->getOffset(tubeid) << std::endl;
        std::cout << " drift time after subtraction : " << tdrift << std::endl;
      }

      if (tdrift < 500 && tdrift > -500) {
        if (debug())
          (*digiIt).print();

        // get bti number for access to the configuration for this bti chip : SV
        // FIX: for the moment take first bti configuration!!!!! ok fixed
        DTSuperLayerId slnum = id.superlayerId();
        //DTChamberId dtcham =id.chamberId();
        int sln = slnum.superlayer();
        int layn = id.layer();
        //int tube = (*digiIt).wire();

        // map in FE channel number: SL theta tubes are numbered inversely w.r.t. hardware setup in new geometry 19/06/06
        // assign ch numbers to btis: in new geometry does not depend on layer staggering anymore! Same staggering anywhere.
        //int nch = geom()->mapTubeInFEch(sln,layn,tube);
        //  int nbti = nch + geom()->layerFEStaggering(sln,layn);

        int nch = geom()->mapTubeInFEch(sln, layn, tube);
        int nbti = nch;

        if (debug()) {
          std::cout << "FE ch " << nch;
          std::cout << " of bti " << nbti;
          //      std::cout << " staggering " <<  geom()->layerFEStaggering(sln,layn);
          std::cout << " now nbti is " << nch << std::endl;
          //      std::cout << " SL phi offset " << geom()->phiSLOffset() << std::endl;
        }

        // FIXED get configuration for the nbti chip Identifier, and from it MCdelay + finedelay
        //DTChamberId sid = geom()->statId();
        //DTBtiId _id = DTBtiId(sid, sln, nbti);

        DTDigi* pdigi = new DTDigi((*digiIt).wire(), tdrift);
        _digis.push_back(pdigi);

        switch (layn) {
          case 1:
            if (activeGetBTI(sln, nbti))
              activeGetBTI(sln, nbti)->add_digi(4, pdigi);
            if (activeGetBTI(sln, nbti - 1))
              activeGetBTI(sln, nbti - 1)->add_digi(8, pdigi);
            break;
          case 2:
            if (activeGetBTI(sln, nbti))
              activeGetBTI(sln, nbti)->add_digi(2, pdigi);
            if (activeGetBTI(sln, nbti - 1))
              activeGetBTI(sln, nbti - 1)->add_digi(6, pdigi);
            break;
          case 3:
            if (activeGetBTI(sln, nbti))
              activeGetBTI(sln, nbti)->add_digi(3, pdigi);
            if (activeGetBTI(sln, nbti - 1))
              activeGetBTI(sln, nbti - 1)->add_digi(7, pdigi);
            break;
          case 4:
            if (activeGetBTI(sln, nbti))
              activeGetBTI(sln, nbti)->add_digi(1, pdigi);
            if (activeGetBTI(sln, nbti - 1))
              activeGetBTI(sln, nbti - 1)->add_digi(5, pdigi);
            if (activeGetBTI(sln, nbti - 2))
              activeGetBTI(sln, nbti - 2)->add_digi(9, pdigi);
            break;
        }
      }  //end loop on digi
      //    }//end loop on lay
      //  }//end loop on sl
    }
  }
}

void DTBtiCard::runBTI() {
  int nbtisig = _btimap[0].size() + _btimap[1].size() + _btimap[2].size();

  if (debug()) {
    std::cout << "DTBtiCard::runBTI called for wheel=" << wheel();
    std::cout << ", station=" << station();
    std::cout << ", sector=" << sector();
    std::cout << ", " << nbtisig << " BTIs with signal" << std::endl;
  }

  if (nbtisig) {
    if (debug()) {
      std::cout << "====================================================" << std::endl;
      std::cout << "              BTI triggers                          " << std::endl;
    }

    // run DTBtiChip algorithm on all non-empty BTI
    for (int sl = 1; sl <= 3; sl++) {
      if (!_btimap[sl - 1].empty()) {
        BTI_iter pbti;
        for (pbti = _btimap[sl - 1].begin(); pbti != _btimap[sl - 1].end(); pbti++) {
          DTBtiChip* bti = (*pbti).second;
          if (bti->number() < 200)
            bti->run();
          for (int step = DTConfig::NSTEPF; step <= DTConfig::NSTEPL; step++) {
            if (bti->nTrig(step) > 0) {
              _cache.push_back(bti->triggerData(step, 1));
              //localPosition(&(bti->triggerData(step,1)));
              //localDirection(&(bti->triggerData(step,1)));
            }
          }
        }
      }
    }

    if (debug())
      std::cout << "====================================================" << std::endl;
  }  //end if(nbtisig)
}

DTBtiChip* DTBtiCard::activeGetBTI(int sl, int n) {
  DTBtiChip* bti = nullptr;
  //check if BTi is out of range before all
  if (n < 1 || n > geom()->nCell(sl)) {
    if (debug()) {
      std::cout << "DTBtiCard::activeGetBTI :";
      std::cout << " invalid bti number: " << n;
      std::cout << " not in range [1," << geom()->nCell(sl) << "]";
      std::cout << " dummy BTI returned!" << std::endl;
    }
    sl = 1;
    n = 999;
    return bti;
  }

  // get configuration for this chip Identifier
  DTChamberId sid = geom()->statId();
  DTBtiId _id = DTBtiId(sid, sl, n);

  //debug this chip
  int _debug_bti = config_bti(_id)->debug();

  if (_debug_bti == 3) {
    std::cout << "DTBtiCard::activeGetBTI :";
    std::cout << " bti number: " << n << std::endl;
  }

  if (sl < 1 || sl > 3) {
    if (_debug_bti > 1) {
      std::cout << "DTBtiCard::activeGetBTI :";
      std::cout << " invalid superlayer number: " << sl;
      std::cout << " dummy BTI returned!" << std::endl;
    }
    sl = 1;
    n = 999;
    return bti;
  }

  BTI_iter pbti = _btimap[sl - 1].find(n);
  if (pbti != _btimap[sl - 1].end()) {
    bti = (*pbti).second;
  } else {
    bti = new DTBtiChip(this, geom(), sl, n, config_bti(_id));
    _btimap[sl - 1][n] = bti;
  }
  return bti;
}

DTBtiChip* DTBtiCard::getBTI(int sl, int n) const {
  if (sl < 1 || sl > 3 || n == 999) {
    std::cout << "DTBtiCard::getBTI :";
    std::cout << " invalid superlayer number: " << sl;
    std::cout << " 0 returned!" << std::endl;
    return nullptr;
  }
  BTI_const_iter pbti = _btimap[sl - 1].find(n);
  if (pbti == _btimap[sl - 1].end()) {
    return nullptr;
  }
  return (*pbti).second;
}

std::vector<DTBtiChip*> DTBtiCard::btiList(int sl) {
  std::vector<DTBtiChip*> blist;

  if (size() < 1)
    return blist;

  if (sl < 1 || sl > 3) {
    std::cout << "DTBtiCard::btiList :";
    std::cout << " invalid superlayer number: " << sl;
    std::cout << " empty list returned" << std::endl;
    return blist;
  }

  for (BTI_const_iter p = _btimap[sl - 1].begin(); p != _btimap[sl - 1].end(); p++) {
    blist.push_back((*p).second);
  }
  return blist;
}

DTBtiTrig* DTBtiCard::storeTrigger(DTBtiTrigData td) {
  DTBtiId btiid = td.parentId();
  if (!(btiid.wheel() == wheel() && btiid.sector() == sector() && btiid.station() == station()))
    return nullptr;
  std::cout << "DTBtiCard::trigger: trigger not belonging to this card! ";
  std::cout << "card=(" << wheel() << "," << station() << "," << sector() << ") ";
  std::cout << "trig=(" << btiid.wheel() << "," << btiid.station() << "," << btiid.sector() << ")";
  // get the appropriate BTI
  DTBtiChip* bti = activeGetBTI(btiid.superlayer(), btiid.bti());
  // create a new trigger in the BTI
  auto trig = std::make_unique<DTBtiTrig>(bti, td);
  auto pTrig = trig.get();
  // add the trigger to the BTI
  bti->addTrig(td.step(), std::move(trig));
  // return the trigger
  return pTrig;
}

/*
LocalPoint 
DTBtiCard::localPosition(const DTTrigData* tr) const {
//OBSOLETE!!!!!
  //@@ patch for Sun 4.2 compiler
  DTBtiTrigData* trig = dynamic_cast<DTBtiTrigData*>(const_cast<DTTrigData*>(tr));
  //  const DTBtiTrigData* trig = dynamic_cast<const DTBtiTrigData*>(tr);
  if(!trig) {
    std::cout << "DTBtiCard::localPosition called with wrong argument!" << std::endl;
    return LocalPoint(0,0,0);
  }
  float x = geom()->localPosition(trig->parentId()).x();
  float y = geom()->localPosition(trig->parentId()).y();
  float z = geom()->localPosition(trig->parentId()).z();
  
  //FE position
  int FE = geom()->posFE(trig->parentId().superlayer());

  //trigger position in the BTI frame
  float xt = 0;
  float yt = 0;
  float xtrig = (float)trig->X() * geom()->cellPitch() / (config()->ST());
  if(trig->btiSL()==2) 
    yt = - xtrig;
  else
    xt = + xtrig;

  if(FE==1){//FE in negative y
      xt = - xt;
      yt = - yt;
  }

  std::cout << "DTBtiCard::localPosition of BTI in ("<<x<<","<<y<<","<<z<<")"<<std::endl;
  std::cout << " called for trig "; 
  trig->print(); 
  std::cout << "in Local Point ("<<x+xt<<","<<y+yt<<","<<z<<")"<<std::endl;

  return LocalPoint(x+xt,y+yt,z);
}
*/

LocalPoint DTBtiCard::localPosition(const DTTrigData* tr) const {
  //NEWGEO!!!
  const DTBtiTrigData* trig = dynamic_cast<const DTBtiTrigData*>(tr);
  if (!trig) {
    std::cout << "DTBtiCard::localPosition called with wrong argument!" << std::endl;
    return LocalPoint(0, 0, 0);
  }

  //BTI position in chamber frame
  float x = geom()->localPosition(trig->parentId()).x();
  float y = geom()->localPosition(trig->parentId()).y();
  float z = geom()->localPosition(trig->parentId()).z();

  //FE position
  //int FE = geom()->posFE(trig->parentId().superlayer());

  //trigger position in the BTI frame
  float xt = 0;
  float yt = 0;

  DTBtiId _btiid = trig->parentId();
  float xtrig = (float)trig->X() * geom()->cellPitch() / (config_bti(_btiid)->ST());
  if (trig->btiSL() == 2)
    yt = -xtrig;
  else
    xt = +xtrig;

  //   17/07/06 Should be obsolete in CMSSW
  //   if(FE==1){//FE in negative y
  //       xt = - xt;
  //       yt = - yt;
  //   }

  if (debug()) {
    std::cout << "DTBtiCard::localPosition of BTI in (" << x << "," << y << "," << z << ")" << std::endl;
    std::cout << " called for trig ";
    trig->print();
    std::cout << "in Local Point (" << x + xt << "," << y + yt << "," << z << ")" << std::endl;
  }

  return LocalPoint(x + xt, y + yt, z);
}

LocalVector DTBtiCard::localDirection(const DTTrigData* tr) const {
  //NEWGEO
  const DTBtiTrigData* trig = dynamic_cast<const DTBtiTrigData*>(tr);
  //this method is only for check purpose
  if (!trig) {
    std::cout << "DTBtiCard::localDirection called with wrong argument!" << std::endl;
    return LocalVector(0, 0, 0);
  }

  //FE position
  //int FE = geom()->posFE(trig->parentId().superlayer());

  // psi in BTI frame
  DTBtiId _btiid = trig->parentId();
  float psi = atan((float)(trig->K() - config_bti(_btiid)->ST()) * geom()->cellPitch() /
                   (2 * geom()->cellH() * config_bti(_btiid)->ST()));
  // (xd,yd,zd) in chamber frame
  float xd = 0;
  float yd = 0;
  float zd = -cos(psi);
  if (trig->btiSL() == 2)
    yd = sin(psi);
  else
    xd = -sin(psi);

  // 17/07/06 Ths should be obsolete in CMSSW
  //   if(FE==1){//FE in negative y
  //       xd = - xd;
  //       yd = - yd;
  //  }

  if (debug()) {
    //BTI position in chamber frame
    float xb = geom()->localPosition(trig->parentId()).x();
    float yb = geom()->localPosition(trig->parentId()).y();
    float zb = geom()->localPosition(trig->parentId()).z();

    std::cout << "DTBtiCard::localDirection of BTI in (" << xb << "," << yb << "," << zb << ")" << std::endl;
    std::cout << " called for trig ";
    trig->print();
    std::cout << "in Local Direction (" << xd << "," << yd << "," << zd << ")" << std::endl;
  }

  return LocalVector(xd, yd, zd);
}

/*

LocalVector
DTBtiCard::localDirection(const DTTrigData* tr) const {
//OBSOLETE!!!!
  //@@ patch for Sun 4.2 compiler
  const DTBtiTrigData* trig = dynamic_cast<const DTBtiTrigData*>(const_cast<DTTrigData*>(tr));
  //  const DTBtiTrigData* trig = dynamic_cast<const DTBtiTrigData*>(tr);
  if(!trig) {
    std::cout << "DTBtiCard::localDirection called with wrong argument!" << std::endl;
    return LocalVector(0,0,0);
  }
  float x1,r,x,y,z;
  x1 = -(float)trig->K() * geom()->cellPitch() /
                      (float)(config()->ST());
  z = - 2 * geom()->cellH();
  r = sqrt(x1*x1+z*z);
  if(trig->btiSL()!=2) {
    x = x1/r;
    y = 0;
  } else {
    x = 0;
    y = x1/r;
  }
  z /= r;
  return LocalVector(x,y,z);
}
*/

DTConfigBti* DTBtiCard::config_bti(DTBtiId& btiid) const {
  //loop on map to find bti
  ConfBtiMap::const_iterator biter = _conf_bti_map.find(btiid);
  if (biter == _conf_bti_map.end()) {
    std::cout << "DTBtiCard::config_bti : BTI (" << btiid.wheel() << "," << btiid.sector() << "," << btiid.station()
              << "," << btiid.superlayer() << "," << btiid.bti() << ") not found, return 0" << std::endl;
    return nullptr;
  }

  return const_cast<DTConfigBti*>(&(*biter).second);
}