DTBtiCard Class Reference

#include <DTBtiCard.h>

Inheritance diagram for DTBtiCard:

Public Member Functions
std::vector< DTBtiChip * >	btiList (int)
	Returns the active BTI list in a given superlayer. More...
void	clearCache ()
	Clear all BTI stuff (map & cache) More...
DTConfigBti *	config_bti (DTBtiId &btiid) const
	Return bti chip configuration. More...
bool	debug () const
	Return TU debug flag. More...
	DTBtiCard (DTTrigGeom *)
	Constructor. More...
DTBtiChip *	getBTI (int sl, int n) const
	Returns the required BTI. Return 0 if it doesn't exist. More...
DTBtiChip *	getBTI (const DTBtiId &btiid) const
	Returns the required BTI. Return 0 if it doesn't exist. More...
LocalVector	localDirection (const DTTrigData *) const override
	NEWGEO Local direction in chamber of a trigger-data object. More...
LocalPoint	localPosition (const DTTrigData *) const override
	NEWGEO Local position in chamber of a trigger-data object. More...
virtual void	reconstruct ()
	Virtual reconstruct member. More...
virtual void	reconstruct (const DTDigiCollection dtDigis)
void	setConfig (const DTConfigManager *conf)
	Set configuration. More...
DTBtiTrig *	storeTrigger (DTBtiTrigData)
bool	useAcceptParamFlag ()
	Return acceptance flag. More...
	~DTBtiCard () override
	Destructor. More...
Public Member Functions inherited from DTCache< T, Coll >
const_iterator	begin () const
	Get first cache element. More...
void	clearCache ()
	Clear cache vector. More...
	DTCache ()
	Constructor. More...
const_iterator	end () const
	Get last cache element. More...
virtual void	reconstruct ()
	Virtual reconstruct member. More...
int	size () const
	Get cache vector's size. More...
virtual	~DTCache ()
	Destructor. More...
Public Member Functions inherited from DTGeomSupplier
DTChamberId	ChamberId () const
	Identifier of the associated chamber. More...
GlobalVector	CMSDirection (const DTTrigData *trig) const
	CMS direction in chamber of a trigger -data object. More...
GlobalPoint	CMSPosition (const DTTrigData *trig) const
	CMS position in chamber of a trigger-data object. More...
	DTGeomSupplier (DTTrigGeom *geom)
	Constructor. More...
DTTrigGeom *	geom () const
	Associated geometry. More...
virtual void	print (const DTTrigData *trig) const
	Print a trigger-data object with also local and global position/direction. More...
int	sector () const
	Return sector number. More...
const DTChamber *	stat () const
	Associated chamber. More...
int	station () const
	Return station number. More...
int	wheel () const
	Return wheel number. More...
virtual	~DTGeomSupplier ()
	Destructor. More...

Private Member Functions
DTBtiChip *	activeGetBTI (int sl, int n)
	Returns the required DTBtiChip. Create it if it doesn't exist. More...
DTBtiChip *	activeGetBTI (const DTBtiId &btiid)
	Returns the required DTBtiChip. Create it if it doesn't exist. More...
void	loadBTI (const DTDigiCollection dtDigis)
	store digi's in DTBtiChip's More...
void	localClear ()
	clear the BTI maps More...
void	runBTI ()
	run DTBtiChip algorithm More...

Private Attributes
BTIContainer	_btimap [3]
ConfBtiMap	_conf_bti_map
bool	_debug
std::vector< DTDigi * >	_digis
bool	_flag_acc
const DTConfigPedestals *	_pedestals

Additional Inherited Members
Public Types inherited from DTCache< T, Coll >
typedef my_collection::const_iterator	const_iterator
typedef my_collection::iterator	iterator
typedef Coll	my_collection
typedef T	my_type
Protected Attributes inherited from DTCache< T, Coll >
my_collection	_cache
Protected Attributes inherited from DTGeomSupplier
DTTrigGeom *	_geom

Detailed Description

Contains active DTBtiChips

Author

C. Grandi, S. Vanini

Modifications: V/05 S.Vanini : modified to run with new geometry III/07 : SV configuration with DTConfigManager

Definition at line 62 of file DTBtiCard.h.

Constructor & Destructor Documentation

DTBtiCard()

DTBtiCard::DTBtiCard

(

DTTrigGeom *

geom

)

Constructor.

Definition at line 60 of file DTBtiCard.cc.

                                     : DTGeomSupplier(geom) {
  //_configBti = new DTConfigBti(bti_pset);
  //_configBti->print();

  //DTChamberId sid = ChamberId();
  //_conf_bti_map = conf_manager->getDTConfigBtiMap(sid);
  //_debug = conf_manager->getDTTPGDebug();

  //_finedelay   = conf_manager->getDTConfigTrigUnit(sid)->MCSetupTime();
  //_MCdelay     = conf_manager->getDTConfigTrigUnit(sid)->MCDigiOffset();
}

~DTBtiCard()

DTBtiCard::~DTBtiCard ( )

override

Destructor.

Definition at line 76 of file DTBtiCard.cc.

References localClear().

                      {
  localClear();
  //delete _conf_Bti;
}

Member Function Documentation

activeGetBTI() [1/2]

DTBtiChip * DTBtiCard::activeGetBTI ( int  sl, int  n  )

private

Returns the required DTBtiChip. Create it if it doesn't exist.

Definition at line 379 of file DTBtiCard.cc.

References _btimap, config_bti(), gather_cfg::cout, DTConfigBti::debug(), debug(), DTCache< T, Coll >::end(), DTGeomSupplier::geom(), create_idmaps::n, DTTrigGeom::nCell(), and DTTrigGeom::statId().

Referenced by loadBTI(), and storeTrigger().

                                                {
  DTBtiChip* bti = nullptr;
  //check if BTi is out of range before all
  if (n < 1 || n > geom()->nCell(sl)) {
    if (debug()) {
      std::cout << "DTBtiCard::activeGetBTI :";
      std::cout << " invalid bti number: " << n;
      std::cout << " not in range [1," << geom()->nCell(sl) << "]";
      std::cout << " dummy BTI returned!" << std::endl;
    }
    sl = 1;
    n = 999;
    return bti;
  }

  // get configuration for this chip Identifier
  DTChamberId sid = geom()->statId();
  DTBtiId _id = DTBtiId(sid, sl, n);

  //debug this chip
  int _debug_bti = config_bti(_id)->debug();

  if (_debug_bti == 3) {
    std::cout << "DTBtiCard::activeGetBTI :";
    std::cout << " bti number: " << n << std::endl;
  }

  if (sl < 1 || sl > 3) {
    if (_debug_bti > 1) {
      std::cout << "DTBtiCard::activeGetBTI :";
      std::cout << " invalid superlayer number: " << sl;
      std::cout << " dummy BTI returned!" << std::endl;
    }
    sl = 1;
    n = 999;
    return bti;
  }

  BTI_iter pbti = _btimap[sl - 1].find(n);
  if (pbti != _btimap[sl - 1].end()) {
    bti = (*pbti).second;
  } else {
    bti = new DTBtiChip(this, geom(), sl, n, config_bti(_id));
    _btimap[sl - 1][n] = bti;
  }
  return bti;
}

activeGetBTI() [2/2]

DTBtiChip* DTBtiCard::activeGetBTI ( const DTBtiId &  btiid )

inlineprivate

Returns the required DTBtiChip. Create it if it doesn't exist.

Definition at line 124 of file DTBtiCard.h.

References activeGetBTI(), DTBtiId::bti(), and DTBtiId::superlayer().

Referenced by activeGetBTI().

{ return activeGetBTI(btiid.superlayer(), btiid.bti()); }

btiList()

std::vector< DTBtiChip * > DTBtiCard::btiList

(

int

sl

)

Returns the active BTI list in a given superlayer.

Definition at line 441 of file DTBtiCard.cc.

References _btimap, DTCache< T, Coll >::begin(), gather_cfg::cout, AlCaHLTBitMon_ParallelJobs::p, and DTCache< T, Coll >::size().

                                               {
  std::vector<DTBtiChip*> blist;

  if (size() < 1)
    return blist;

  if (sl < 1 || sl > 3) {
    std::cout << "DTBtiCard::btiList :";
    std::cout << " invalid superlayer number: " << sl;
    std::cout << " empty list returned" << std::endl;
    return blist;
  }

  for (BTI_const_iter p = _btimap[sl - 1].begin(); p != _btimap[sl - 1].end(); p++) {
    blist.push_back((*p).second);
  }
  return blist;
}

clearCache()

void DTBtiCard::clearCache

(

)

Clear all BTI stuff (map & cache)

Definition at line 85 of file DTBtiCard.cc.

References DTCache< T, Coll >::clearCache(), and localClear().

Referenced by reconstruct(), and DTTrig::triggerReco().

                           {
  BTICache::clearCache();
  localClear();
}

config_bti()

DTConfigBti * DTBtiCard::config_bti

(

DTBtiId &

btiid

)

const

Return bti chip configuration.

Definition at line 637 of file DTBtiCard.cc.

References _conf_bti_map, DTBtiId::bti(), gather_cfg::cout, DTBtiId::sector(), DTBtiId::station(), DTBtiId::superlayer(), and DTBtiId::wheel().

Referenced by activeGetBTI(), DTTracoCard::loadTRACO(), localDirection(), and localPosition().

                                                       {
  //loop on map to find bti
  ConfBtiMap::const_iterator biter = _conf_bti_map.find(btiid);
  if (biter == _conf_bti_map.end()) {
    std::cout << "DTBtiCard::config_bti : BTI (" << btiid.wheel() << "," << btiid.sector() << "," << btiid.station()
              << "," << btiid.superlayer() << "," << btiid.bti() << ") not found, return 0" << std::endl;
    return nullptr;
  }

  return const_cast<DTConfigBti*>(&(*biter).second);
}

debug()

bool DTBtiCard::debug ( ) const

inline

Return TU debug flag.

Definition at line 77 of file DTBtiCard.h.

References _debug.

Referenced by activeGetBTI(), loadBTI(), localDirection(), localPosition(), and runBTI().

{ return _debug; }

getBTI() [1/2]

DTBtiChip * DTBtiCard::getBTI	(	int	sl,
		int	n
	)		const

Returns the required BTI. Return 0 if it doesn't exist.

Definition at line 427 of file DTBtiCard.cc.

References _btimap, gather_cfg::cout, DTCache< T, Coll >::end(), and create_idmaps::n.

                                                {
  if (sl < 1 || sl > 3 || n == 999) {
    std::cout << "DTBtiCard::getBTI :";
    std::cout << " invalid superlayer number: " << sl;
    std::cout << " 0 returned!" << std::endl;
    return nullptr;
  }
  BTI_const_iter pbti = _btimap[sl - 1].find(n);
  if (pbti == _btimap[sl - 1].end()) {
    return nullptr;
  }
  return (*pbti).second;
}

getBTI() [2/2]

DTBtiChip* DTBtiCard::getBTI ( const DTBtiId &  btiid ) const

inline

Returns the required BTI. Return 0 if it doesn't exist.

Definition at line 83 of file DTBtiCard.h.

References DTBtiId::bti(), getBTI(), and DTBtiId::superlayer().

Referenced by getBTI().

{ return getBTI(btiid.superlayer(), btiid.bti()); }

loadBTI()

void DTBtiCard::loadBTI ( const DTDigiCollection  dtDigis )

private

store digi's in DTBtiChip's

Definition at line 237 of file DTBtiCard.cc.

References _digis, _pedestals, activeGetBTI(), DTBtiChip::add_digi(), gather_cfg::cout, debug(), DTGeomSupplier::geom(), DTConfigPedestals::getOffset(), EcalPhiSymFlatTableProducers_cfi::id, localClear(), DTTrigGeom::mapTubeInFEch(), redigi_cff::pdigi, isotrackApplyRegressor::range, DTGeomSupplier::sector(), DTGeomSupplier::station(), DTSuperLayerId::superlayer(), and DTGeomSupplier::wheel().

Referenced by reconstruct().

                                                      {
  localClear();

  if (debug()) {
    std::cout << "DTBtiCard::loadBTI called for wheel=" << wheel();
    std::cout << ", station=" << station();
    std::cout << ", sector=" << sector() << std::endl;
  }

  DTDigiCollection::DigiRangeIterator detUnitIt;
  for (detUnitIt = dtDigis.begin(); detUnitIt != dtDigis.end(); ++detUnitIt) {
    const DTLayerId& id = (*detUnitIt).first;
    const DTDigiCollection::Range& range = (*detUnitIt).second;

    // DTLayerId print-out
    if (debug()) {
      std::cout << "--------------" << std::endl;
      std::cout << "id: " << id;
    }

    // Loop over the digis of this DetUnit
    for (DTDigiCollection::const_iterator digiIt = range.first; digiIt != range.second; ++digiIt) {
      int tube = (*digiIt).wire();
      const DTWireId tubeid(id, tube);
      float tdrift = (*digiIt).time() - _pedestals->getOffset(tubeid);

      if (debug()) {
        std::cout << " digi time : " << (*digiIt).time();
        std::cout << " pedestal offset : " << _pedestals->getOffset(tubeid) << std::endl;
        std::cout << " drift time after subtraction : " << tdrift << std::endl;
      }

      if (tdrift < 500 && tdrift > -500) {
        if (debug())
          (*digiIt).print();

        // get bti number for access to the configuration for this bti chip : SV
        // FIX: for the moment take first bti configuration!!!!! ok fixed
        DTSuperLayerId slnum = id.superlayerId();
        //DTChamberId dtcham =id.chamberId();
        int sln = slnum.superlayer();
        int layn = id.layer();
        //int tube = (*digiIt).wire();

        // map in FE channel number: SL theta tubes are numbered inversely w.r.t. hardware setup in new geometry 19/06/06
        // assign ch numbers to btis: in new geometry does not depend on layer staggering anymore! Same staggering anywhere.
        //int nch = geom()->mapTubeInFEch(sln,layn,tube);
        //  int nbti = nch + geom()->layerFEStaggering(sln,layn);

        int nch = geom()->mapTubeInFEch(sln, layn, tube);
        int nbti = nch;

        if (debug()) {
          std::cout << "FE ch " << nch;
          std::cout << " of bti " << nbti;
          //      std::cout << " staggering " <<  geom()->layerFEStaggering(sln,layn);
          std::cout << " now nbti is " << nch << std::endl;
          //      std::cout << " SL phi offset " << geom()->phiSLOffset() << std::endl;
        }

        // FIXED get configuration for the nbti chip Identifier, and from it MCdelay + finedelay
        //DTChamberId sid = geom()->statId();
        //DTBtiId _id = DTBtiId(sid, sln, nbti);

        DTDigi* pdigi = new DTDigi((*digiIt).wire(), tdrift);
        _digis.push_back(pdigi);

        switch (layn) {
          case 1:
            if (activeGetBTI(sln, nbti))
              activeGetBTI(sln, nbti)->add_digi(4, pdigi);
            if (activeGetBTI(sln, nbti - 1))
              activeGetBTI(sln, nbti - 1)->add_digi(8, pdigi);
            break;
          case 2:
            if (activeGetBTI(sln, nbti))
              activeGetBTI(sln, nbti)->add_digi(2, pdigi);
            if (activeGetBTI(sln, nbti - 1))
              activeGetBTI(sln, nbti - 1)->add_digi(6, pdigi);
            break;
          case 3:
            if (activeGetBTI(sln, nbti))
              activeGetBTI(sln, nbti)->add_digi(3, pdigi);
            if (activeGetBTI(sln, nbti - 1))
              activeGetBTI(sln, nbti - 1)->add_digi(7, pdigi);
            break;
          case 4:
            if (activeGetBTI(sln, nbti))
              activeGetBTI(sln, nbti)->add_digi(1, pdigi);
            if (activeGetBTI(sln, nbti - 1))
              activeGetBTI(sln, nbti - 1)->add_digi(5, pdigi);
            if (activeGetBTI(sln, nbti - 2))
              activeGetBTI(sln, nbti - 2)->add_digi(9, pdigi);
            break;
        }
      }  //end loop on digi
      //    }//end loop on lay
      //  }//end loop on sl
    }
  }
}

localClear()

void DTBtiCard::localClear ( )

private

clear the BTI maps

Definition at line 100 of file DTBtiCard.cc.

References _btimap, _digis, DTCache< T, Coll >::begin(), mps_fire::i, and AlCaHLTBitMon_ParallelJobs::p.

Referenced by clearCache(), loadBTI(), and ~DTBtiCard().

                           {
  // Clear the maps
  for (int i = 0; i < 3; i++) {
    for (BTI_iter p = _btimap[i].begin(); p != _btimap[i].end(); p++) {
      delete (*p).second;
    }
    _btimap[i].clear();
  }

  //clear digis
  std::vector<DTDigi*>::const_iterator p;
  for (p = _digis.begin(); p < _digis.end(); p++)
    delete (*p);
  _digis.clear();
}

localDirection()

LocalVector DTBtiCard::localDirection ( const DTTrigData *  tr ) const

overridevirtual

NEWGEO Local direction in chamber of a trigger-data object.

Implements DTGeomSupplier.

Definition at line 562 of file DTBtiCard.cc.

References DTTrigGeom::cellH(), DTTrigGeom::cellPitch(), config_bti(), funct::cos(), gather_cfg::cout, debug(), DTGeomSupplier::geom(), DTTrigGeom::localPosition(), funct::sin(), DTConfigBti::ST(), ClusterTask_cfi::trig, x, y, and z.

                                                                {
  //NEWGEO
  const DTBtiTrigData* trig = dynamic_cast<const DTBtiTrigData*>(tr);
  //this method is only for check purpose
  if (!trig) {
    std::cout << "DTBtiCard::localDirection called with wrong argument!" << std::endl;
    return LocalVector(0, 0, 0);
  }

  //FE position
  //int FE = geom()->posFE(trig->parentId().superlayer());

  // psi in BTI frame
  DTBtiId _btiid = trig->parentId();
  float psi = atan((float)(trig->K() - config_bti(_btiid)->ST()) * geom()->cellPitch() /
                   (2 * geom()->cellH() * config_bti(_btiid)->ST()));
  // (xd,yd,zd) in chamber frame
  float xd = 0;
  float yd = 0;
  float zd = -cos(psi);
  if (trig->btiSL() == 2)
    yd = sin(psi);
  else
    xd = -sin(psi);

  // 17/07/06 Ths should be obsolete in CMSSW
  //   if(FE==1){//FE in negative y
  //       xd = - xd;
  //       yd = - yd;
  //  }

  if (debug()) {
    //BTI position in chamber frame
    float xb = geom()->localPosition(trig->parentId()).x();
    float yb = geom()->localPosition(trig->parentId()).y();
    float zb = geom()->localPosition(trig->parentId()).z();

    std::cout << "DTBtiCard::localDirection of BTI in (" << xb << "," << yb << "," << zb << ")" << std::endl;
    std::cout << " called for trig ";
    trig->print();
    std::cout << "in Local Direction (" << xd << "," << yd << "," << zd << ")" << std::endl;
  }

  return LocalVector(xd, yd, zd);
}

localPosition()

LocalPoint DTBtiCard::localPosition ( const DTTrigData *  tr ) const

overridevirtual

NEWGEO Local position in chamber of a trigger-data object.

Implements DTGeomSupplier.

Definition at line 519 of file DTBtiCard.cc.

References DTTrigGeom::cellPitch(), config_bti(), gather_cfg::cout, debug(), ALCARECOEcalPhiSym_cff::float, DTGeomSupplier::geom(), DTTrigGeom::localPosition(), DTConfigBti::ST(), ClusterTask_cfi::trig, x, y, and z.

                                                              {
  //NEWGEO!!!
  const DTBtiTrigData* trig = dynamic_cast<const DTBtiTrigData*>(tr);
  if (!trig) {
    std::cout << "DTBtiCard::localPosition called with wrong argument!" << std::endl;
    return LocalPoint(0, 0, 0);
  }

  //BTI position in chamber frame
  float x = geom()->localPosition(trig->parentId()).x();
  float y = geom()->localPosition(trig->parentId()).y();
  float z = geom()->localPosition(trig->parentId()).z();

  //FE position
  //int FE = geom()->posFE(trig->parentId().superlayer());

  //trigger position in the BTI frame
  float xt = 0;
  float yt = 0;

  DTBtiId _btiid = trig->parentId();
  float xtrig = (float)trig->X() * geom()->cellPitch() / (config_bti(_btiid)->ST());
  if (trig->btiSL() == 2)
    yt = -xtrig;
  else
    xt = +xtrig;

  //   17/07/06 Should be obsolete in CMSSW
  //   if(FE==1){//FE in negative y
  //       xt = - xt;
  //       yt = - yt;
  //   }

  if (debug()) {
    std::cout << "DTBtiCard::localPosition of BTI in (" << x << "," << y << "," << z << ")" << std::endl;
    std::cout << " called for trig ";
    trig->print();
    std::cout << "in Local Point (" << x + xt << "," << y + yt << "," << z << ")" << std::endl;
  }

  return LocalPoint(x + xt, y + yt, z);
}

reconstruct() [1/2]

virtual void DTCache< T, Coll >::reconstruct

inline

Virtual reconstruct member.

Definition at line 50 of file DTCache.h.

{}

reconstruct() [2/2]

virtual void DTBtiCard::reconstruct ( const DTDigiCollection  dtDigis )

inlinevirtual

Definition at line 101 of file DTBtiCard.h.

References clearCache(), loadBTI(), and runBTI().

Referenced by DTTrig::triggerReco().

                                                           {
    clearCache();
    loadBTI(dtDigis);
    runBTI();
  }

runBTI()

void DTBtiCard::runBTI ( )

private

run DTBtiChip algorithm

Definition at line 339 of file DTBtiCard.cc.

References _btimap, DTCache< T, Coll >::_cache, DTCache< T, Coll >::begin(), gather_cfg::cout, debug(), relativeConstraints::empty, DTConfig::NSTEPF, DTConfig::NSTEPL, DTBtiChip::nTrig(), DTBtiChip::number(), DTBtiChip::run(), DTGeomSupplier::sector(), DTGeomSupplier::station(), DTBtiChip::triggerData(), and DTGeomSupplier::wheel().

Referenced by reconstruct().

                       {
  int nbtisig = _btimap[0].size() + _btimap[1].size() + _btimap[2].size();

  if (debug()) {
    std::cout << "DTBtiCard::runBTI called for wheel=" << wheel();
    std::cout << ", station=" << station();
    std::cout << ", sector=" << sector();
    std::cout << ", " << nbtisig << " BTIs with signal" << std::endl;
  }

  if (nbtisig) {
    if (debug()) {
      std::cout << "====================================================" << std::endl;
      std::cout << "              BTI triggers                          " << std::endl;
    }

    // run DTBtiChip algorithm on all non-empty BTI
    for (int sl = 1; sl <= 3; sl++) {
      if (!_btimap[sl - 1].empty()) {
        BTI_iter pbti;
        for (pbti = _btimap[sl - 1].begin(); pbti != _btimap[sl - 1].end(); pbti++) {
          DTBtiChip* bti = (*pbti).second;
          if (bti->number() < 200)
            bti->run();
          for (int step = DTConfig::NSTEPF; step <= DTConfig::NSTEPL; step++) {
            if (bti->nTrig(step) > 0) {
              _cache.push_back(bti->triggerData(step, 1));
              //localPosition(&(bti->triggerData(step,1)));
              //localDirection(&(bti->triggerData(step,1)));
            }
          }
        }
      }
    }

    if (debug())
      std::cout << "====================================================" << std::endl;
  }  //end if(nbtisig)
}

setConfig()

void DTBtiCard::setConfig

(

const DTConfigManager *

conf

)

Set configuration.

Definition at line 90 of file DTBtiCard.cc.

References _conf_bti_map, _debug, _flag_acc, _pedestals, DTGeomSupplier::ChamberId(), DTConfigManager::getDTConfigBtiMap(), DTConfigManager::getDTConfigPedestals(), DTConfigManager::getDTTPGDebug(), and DTConfigManager::useAcceptParam().

Referenced by DTSCTrigUnit::setConfig().

                                                     {
  DTChamberId sid = ChamberId();
  _conf_bti_map = conf->getDTConfigBtiMap(sid);
  _debug = conf->getDTTPGDebug();
  _pedestals = conf->getDTConfigPedestals();

  // get bti acceptance flag
  _flag_acc = conf->useAcceptParam();
}

storeTrigger()

DTBtiTrig * DTBtiCard::storeTrigger

(

DTBtiTrigData

td

)

Returns a DTBtiTrig corresponding to a DTBtiTrigData. Creates the corresponding BTI chip if needed and stores the trigger

Definition at line 460 of file DTBtiCard.cc.

References activeGetBTI(), DTBtiId::bti(), gather_cfg::cout, eostools::move(), DTBtiTrigData::parentId(), DTBtiId::sector(), DTGeomSupplier::sector(), DTBtiId::station(), DTGeomSupplier::station(), DTBtiTrigData::step(), DTBtiId::superlayer(), ClusterTask_cfi::trig, DTBtiId::wheel(), and DTGeomSupplier::wheel().

                                                   {
  DTBtiId btiid = td.parentId();
  if (!(btiid.wheel() == wheel() && btiid.sector() == sector() && btiid.station() == station()))
    return nullptr;
  std::cout << "DTBtiCard::trigger: trigger not belonging to this card! ";
  std::cout << "card=(" << wheel() << "," << station() << "," << sector() << ") ";
  std::cout << "trig=(" << btiid.wheel() << "," << btiid.station() << "," << btiid.sector() << ")";
  // get the appropriate BTI
  DTBtiChip* bti = activeGetBTI(btiid.superlayer(), btiid.bti());
  // create a new trigger in the BTI
  auto trig = std::make_unique<DTBtiTrig>(bti, td);
  auto pTrig = trig.get();
  // add the trigger to the BTI
  bti->addTrig(td.step(), std::move(trig));
  // return the trigger
  return pTrig;
}

useAcceptParamFlag()

bool DTBtiCard::useAcceptParamFlag ( )

inline

Return acceptance flag.

Definition at line 111 of file DTBtiCard.h.

References _flag_acc.

Referenced by DTBtiChip::DTBtiChip().

{ return _flag_acc; }

Member Data Documentation

_btimap

BTIContainer DTBtiCard::_btimap[3]

private

Definition at line 130 of file DTBtiCard.h.

Referenced by activeGetBTI(), btiList(), getBTI(), localClear(), and runBTI().

_conf_bti_map

ConfBtiMap DTBtiCard::_conf_bti_map

private

Definition at line 131 of file DTBtiCard.h.

Referenced by config_bti(), and setConfig().

_debug

bool DTBtiCard::_debug

private

Definition at line 135 of file DTBtiCard.h.

Referenced by debug(), and setConfig().

_digis

std::vector<DTDigi*> DTBtiCard::_digis

private

Definition at line 133 of file DTBtiCard.h.

Referenced by loadBTI(), and localClear().

_flag_acc

bool DTBtiCard::_flag_acc

private

Definition at line 138 of file DTBtiCard.h.

Referenced by setConfig(), and useAcceptParamFlag().

_pedestals

const DTConfigPedestals* DTBtiCard::_pedestals

private

Definition at line 136 of file DTBtiCard.h.

Referenced by loadBTI(), and setConfig().