DaqScopeModeHistosUsingDb.cc

Go to the documentation of this file.

#include "DQM/SiStripCommissioningDbClients/interface/DaqScopeModeHistosUsingDb.h"
#include "CondFormats/SiStripObjects/interface/DaqScopeModeAnalysis.h"
#include "DataFormats/SiStripCommon/interface/SiStripConstants.h"
#include "DataFormats/SiStripCommon/interface/SiStripFecKey.h"
#include "DataFormats/SiStripCommon/interface/SiStripFedKey.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"
#include <iostream>

using namespace sistrip;

// -----------------------------------------------------------------------------
DaqScopeModeHistosUsingDb::DaqScopeModeHistosUsingDb(const edm::ParameterSet& pset,
                                                     DQMStore* bei,
                                                     SiStripConfigDb* const db,
                                                     edm::ESGetToken<TrackerTopology, TrackerTopologyRcd> tTopoToken)
    : CommissioningHistograms(
          pset.getParameter<edm::ParameterSet>("DaqScopeModeParameters"), bei, sistrip::DAQ_SCOPE_MODE),
      CommissioningHistosUsingDb(db, tTopoToken, sistrip::DAQ_SCOPE_MODE),
      DaqScopeModeHistograms(pset.getParameter<edm::ParameterSet>("DaqScopeModeParameters"), bei) {
  LogTrace(mlDqmClient_) << "[DaqScopeModeHistosUsingDb::" << __func__ << "]"
                         << " Constructing object...";
  highThreshold_ = this->pset().getParameter<double>("HighThreshold");
  lowThreshold_ = this->pset().getParameter<double>("LowThreshold");
  LogTrace(mlDqmClient_) << "[DaqScopeModeHistosUsingDb::" << __func__ << "]"
                         << " Set FED zero suppression high/low threshold to " << highThreshold_ << "/"
                         << lowThreshold_;
  disableBadStrips_ = this->pset().getParameter<bool>("DisableBadStrips");
  keepStripsDisabled_ = this->pset().getParameter<bool>("KeepStripsDisabled");
  LogTrace(mlDqmClient_) << "[DaqScopeModeHistosUsingDb::" << __func__ << "]"
                         << " Disabling strips: " << disableBadStrips_
                         << " ; keeping previously disabled strips: " << keepStripsDisabled_;
  allowSelectiveUpload_ =
      this->pset().existsAs<bool>("doSelectiveUpload") ? this->pset().getParameter<bool>("doSelectiveUpload") : false;
  LogTrace(mlDqmClient_) << "[DaqScopeModeHistosUsingDb::" << __func__ << "]"
                         << " Selective upload of modules set to : " << allowSelectiveUpload_;

  skipPedestalUpdate_ =
      this->pset().existsAs<bool>("SkipPedestalUpdate") ? this->pset().getParameter<bool>("SkipPedestalUpdate") : false;
  skipTickUpdate_ =
      this->pset().existsAs<bool>("SkipTickUpdate") ? this->pset().getParameter<bool>("SkipTickUpdate") : false;
  LogTrace(mlDqmClient_) << "[DaqScopeModeHistosUsingDb::" << __func__ << "]"
                         << " Perform pedestal upload set to : " << skipPedestalUpdate_;
  LogTrace(mlDqmClient_) << "[DaqScopeModeHistosUsingDb::" << __func__ << "]"
                         << " Perform tick-mark upload set to : " << skipTickUpdate_;
}

// -----------------------------------------------------------------------------
DaqScopeModeHistosUsingDb::~DaqScopeModeHistosUsingDb() {
  LogTrace(mlDqmClient_) << "[DaqScopeModeHistosUsingDb::" << __func__ << "]"
                         << " Destructing object...";
}

// -----------------------------------------------------------------------------
void DaqScopeModeHistosUsingDb::uploadConfigurations() {
  LogTrace(mlDqmClient_) << "[DaqScopeModeHistosUsingDb::" << __func__ << "]";

  if (!db()) {
    edm::LogError(mlDqmClient_) << "[DaqScopeModeHistosUsingDb::" << __func__ << "]"
                                << " NULL pointer to SiStripConfigDb interface!"
                                << " Aborting upload...";
    return;
  }

  // Update FED descriptions with new peds/noise values as well as tick-marks (no PLL delays, for these ones please use the Timing run
  SiStripConfigDb::FedDescriptionsRange feds = db()->getFedDescriptions();
  update(feds);

  if (doUploadConf()) {
    edm::LogVerbatim(mlDqmClient_) << "[DaqScopeModeHistosUsingDb::" << __func__ << "]"
                                   << " Uploading FED information to DB...";
    db()->uploadFedDescriptions();
    edm::LogVerbatim(mlDqmClient_) << "[DaqScopeModeHistosUsingDb::" << __func__ << "]"
                                   << " Completed database upload of " << feds.size() << " FED descriptions!";
  } else {
    edm::LogWarning(mlDqmClient_) << "[DaqScopeModeHistosUsingDb::" << __func__ << "]"
                                  << " No FED values will be uploaded to DB...";
  }
}

// -----------------------------------------------------------------------------
void DaqScopeModeHistosUsingDb::update(SiStripConfigDb::FedDescriptionsRange feds) {
  // Retrieve FED ids from cabling
  auto ids = cabling()->fedIds();

  // Iterate through feds and update fed descriptions
  uint16_t updated_peds = 0;
  uint16_t updated_ticks = 0;
  SiStripConfigDb::FedDescriptionsV::const_iterator ifed;
  for (ifed = feds.begin(); ifed != feds.end(); ifed++) {
    // If FED id not found in list (from cabling), then continue
    if (find(ids.begin(), ids.end(), (*ifed)->getFedId()) == ids.end()) {
      continue;
    }

    for (uint16_t ichan = 0; ichan < sistrip::FEDCH_PER_FED; ichan++) {
      // Build FED and FEC keys
      const FedChannelConnection& conn = cabling()->fedConnection((*ifed)->getFedId(), ichan);

      if (conn.fecCrate() == sistrip::invalid_ || conn.fecSlot() == sistrip::invalid_ ||
          conn.fecRing() == sistrip::invalid_ || conn.ccuAddr() == sistrip::invalid_ ||
          conn.ccuChan() == sistrip::invalid_ || conn.lldChannel() == sistrip::invalid_) {
        continue;
      }

      SiStripFedKey fed_key(conn.fedId(), SiStripFedKey::feUnit(conn.fedCh()), SiStripFedKey::feChan(conn.fedCh()));

      SiStripFecKey fec_key(
          conn.fecCrate(), conn.fecSlot(), conn.fecRing(), conn.ccuAddr(), conn.ccuChan(), conn.lldChannel());

      // Locate appropriate analysis object
      Analyses::const_iterator iter = data(allowSelectiveUpload_).find(fec_key.key());

      if (iter != data(allowSelectiveUpload_).end()) {
        // Check if analysis is valid
        if (!iter->second->isValid()) {
          edm::LogWarning(mlDqmClient_) << "[DaqScopeModeHistosUsingDb::" << __func__ << "]"
                                        << " Skipping invalid channel with coordinates: FedKey/Id/Ch: " << hex
                                        << setw(8) << setfill('0') << fed_key.key() << dec << "/" << (*ifed)->getFedId()
                                        << "/" << ichan << " and device with FEC/slot/ring/CCU/LLD "
                                        << fec_key.fecCrate() << "/" << fec_key.fecSlot() << "/" << fec_key.fecRing()
                                        << "/" << fec_key.ccuAddr() << "/" << fec_key.ccuChan() << "/"
                                        << fec_key.channel();
          continue;
        }

        DaqScopeModeAnalysis* anal = dynamic_cast<DaqScopeModeAnalysis*>(iter->second);
        if (!anal) {
          edm::LogError(mlDqmClient_) << "[DaqScopeModeHistosUsingDb::" << __func__ << "]"
                                      << " NULL pointer to analysis object!";
          continue;
        }

        if (not skipPedestalUpdate_) {
          // Determine the pedestal shift to apply
          uint32_t pedshift = 127;
          for (uint16_t iapv = 0; iapv < sistrip::APVS_PER_FEDCH; iapv++) {
            uint32_t pedmin = (uint32_t)anal->pedsMin()[iapv];
            pedshift = pedmin < pedshift ? pedmin : pedshift;
            std::stringstream ss;
            ss << "iapv: " << iapv << " pedsMin()[iapv]: " << anal->pedsMin()[iapv] << " pedmin: " << pedmin
               << " pedshift: " << pedshift;
            edm::LogWarning(mlDqmClient_) << ss.str();
          }

          // Iterate through APVs and strips
          for (uint16_t iapv = 0; iapv < sistrip::APVS_PER_FEDCH; iapv++) {
            for (uint16_t istr = 0; istr < anal->peds()[iapv].size(); istr++) {
              // Patch added by R.B. (I'm back! ;-), requested by J.F. and S.L. (04/11/2010)
              if (anal->peds()[iapv][istr] < 1.) {  //@@ ie, zero
                edm::LogWarning(mlDqmClient_)
                    << "[DaqScopeModeHistosUsingDb::" << __func__ << "]"
                    << " Skipping ZERO pedestal value (ie, NO UPLOAD TO DB!) for FedKey/Id/Ch: " << hex << setw(8)
                    << setfill('0') << fed_key.key() << dec << "/" << (*ifed)->getFedId() << "/" << ichan
                    << " and device with FEC/slot/ring/CCU/LLD " << fec_key.fecCrate() << "/" << fec_key.fecSlot()
                    << "/" << fec_key.fecRing() << "/" << fec_key.ccuAddr() << "/" << fec_key.ccuChan() << "/"
                    << fec_key.channel();
                continue;  //@@ do not upload
              }

              // get the information on the strip as it was on the db
              Fed9U::Fed9UAddress addr(ichan, iapv, istr);
              Fed9U::Fed9UStripDescription temp = (*ifed)->getFedStrips().getStrip(addr);

              // determine whether we need to disable the strip
              bool disableStrip = false;
              if (keepStripsDisabled_) {
                disableStrip = temp.getDisable();
              } else if (disableBadStrips_) {
                DaqScopeModeAnalysis::VInt dead = anal->dead()[iapv];
                if (find(dead.begin(), dead.end(), istr) != dead.end())
                  disableStrip = true;
                DaqScopeModeAnalysis::VInt noisy = anal->noisy()[iapv];
                if (find(noisy.begin(), noisy.end(), istr) != noisy.end())
                  disableStrip = true;
              }

              Fed9U::Fed9UStripDescription data(static_cast<uint32_t>(anal->peds()[iapv][istr] - pedshift),
                                                highThreshold_,
                                                lowThreshold_,
                                                anal->noise()[iapv][istr],
                                                disableStrip);

              std::stringstream ss;
              if (data.getDisable() && edm::isDebugEnabled()) {
                ss << "[DaqScopeModeHistosUsingDb::" << __func__ << "]"
                   << " Disabling strip in Fed9UStripDescription object..." << std::endl
                   << " for FED id/channel and APV/strip : " << fed_key.fedId() << "/" << fed_key.fedChannel() << " "
                   << iapv << "/" << istr << std::endl
                   << " and crate/FEC/ring/CCU/module    : " << fec_key.fecCrate() << "/" << fec_key.fecSlot() << "/"
                   << fec_key.fecRing() << "/" << fec_key.ccuAddr() << "/" << fec_key.ccuChan() << std::endl
                   << " from ped/noise/high/low/disable  : " << static_cast<uint16_t>(temp.getPedestal()) << "/"
                   << static_cast<uint16_t>(temp.getHighThreshold()) << "/"
                   << static_cast<uint16_t>(temp.getLowThreshold()) << "/" << static_cast<uint16_t>(temp.getNoise())
                   << "/" << static_cast<uint16_t>(temp.getDisable()) << std::endl;
              }

              // update strip inf
              (*ifed)->getFedStrips().setStrip(addr, data);

              if (data.getDisable() && edm::isDebugEnabled()) {
                ss << " to ped/noise/high/low/disable    : " << static_cast<uint16_t>(data.getPedestal()) << "/"
                   << static_cast<uint16_t>(data.getHighThreshold()) << "/"
                   << static_cast<uint16_t>(data.getLowThreshold()) << "/" << static_cast<uint16_t>(data.getNoise())
                   << "/" << static_cast<uint16_t>(data.getDisable()) << std::endl;
                LogTrace(mlDqmClient_) << ss.str();
              }
            }  // end loop on strips
          }  // end loop on apvs
          updated_peds++;
        }

        // if one wants to update the frame finding threhsolds
        if (not skipTickUpdate_) {
          // Update frame finding threshold
          Fed9U::Fed9UAddress addr(ichan);
          uint16_t old_threshold = static_cast<uint16_t>((*ifed)->getFrameThreshold(addr));
          if (anal->isValid()) {
            (*ifed)->setFrameThreshold(addr, anal->frameFindingThreshold());
            updated_ticks++;
          }
          uint16_t new_threshold = static_cast<uint16_t>((*ifed)->getFrameThreshold(addr));

          std::stringstream ss;
          ss << "LLD channel : old frame threshold " << old_threshold << " new frame threshold " << new_threshold
             << std::endl;
          edm::LogWarning(mlDqmClient_) << ss.str();

          // Debug
          ss.clear();
          ss << "[DaqScopeModeHistosUsingDb::" << __func__ << "]";
          if (anal->isValid()) {
            ss << " Updating the frame-finding threshold"
               << " from " << old_threshold << " to " << new_threshold << " using tick mark base/peak/height "
               << anal->base() << "/" << anal->peak() << "/" << anal->height();
          } else {
            ss << " Cannot update the frame-finding threshold"
               << " from " << old_threshold << " to a new value using invalid analysis ";
          }
          ss << " for crate/FEC/ring/CCU/module/LLD " << fec_key.fecCrate() << "/" << fec_key.fecSlot() << "/"
             << fec_key.fecRing() << "/" << fec_key.ccuAddr() << "/" << fec_key.ccuChan() << fec_key.channel()
             << " and FED id/ch " << fed_key.fedId() << "/" << fed_key.fedChannel();
          anal->print(ss);
          LogTrace(mlDqmClient_) << ss.str();
        }
      } else {
        if (deviceIsPresent(fec_key)) {
          edm::LogWarning(mlDqmClient_) << "[DaqScopeModeHistosUsingDb::" << __func__ << "]"
                                        << " Unable to find pedestals/noise for FedKey/Id/Ch: " << hex << setw(8)
                                        << setfill('0') << fed_key.key() << dec << "/" << (*ifed)->getFedId() << "/"
                                        << ichan << " and device with FEC/slot/ring/CCU/LLD " << fec_key.fecCrate()
                                        << "/" << fec_key.fecSlot() << "/" << fec_key.fecRing() << "/"
                                        << fec_key.ccuAddr() << "/" << fec_key.ccuChan() << "/" << fec_key.channel();
        }
      }
    }
  }

  edm::LogVerbatim(mlDqmClient_) << "[DaqScopeModeHistosUsingDb::" << __func__ << "]"
                                 << " Updated FED parameters for pedestal/noise " << updated_peds << " channels"
                                 << " Updated FED parameters for frame finding thresholds " << updated_ticks
                                 << " channels";
}

// -----------------------------------------------------------------------------
void DaqScopeModeHistosUsingDb::create(SiStripConfigDb::AnalysisDescriptionsV& desc, Analysis analysis) {
  DaqScopeModeAnalysis* anal = dynamic_cast<DaqScopeModeAnalysis*>(analysis->second);
  if (!anal) {
    return;
  }

  SiStripFecKey fec_key(anal->fecKey());
  SiStripFedKey fed_key(anal->fedKey());

  for (uint16_t iapv = 0; iapv < 2; ++iapv) {
    // Create description for the pedestal table
    PedestalsAnalysisDescription* peds_tmp;
    peds_tmp = new PedestalsAnalysisDescription(anal->dead()[iapv],
                                                anal->noisy()[iapv],
                                                anal->pedsMean()[iapv],
                                                anal->pedsSpread()[iapv],
                                                anal->noiseMean()[iapv],
                                                anal->noiseSpread()[iapv],
                                                anal->rawMean()[iapv],
                                                anal->rawSpread()[iapv],
                                                anal->pedsMax()[iapv],
                                                anal->pedsMin()[iapv],
                                                anal->noiseMax()[iapv],
                                                anal->noiseMin()[iapv],
                                                anal->rawMax()[iapv],
                                                anal->rawMin()[iapv],
                                                fec_key.fecCrate(),
                                                fec_key.fecSlot(),
                                                fec_key.fecRing(),
                                                fec_key.ccuAddr(),
                                                fec_key.ccuChan(),
                                                SiStripFecKey::i2cAddr(fec_key.lldChan(), !iapv),
                                                db()->dbParams().partitions().begin()->second.partitionName(),
                                                db()->dbParams().partitions().begin()->second.runNumber(),
                                                anal->isValid(),
                                                "",
                                                fed_key.fedId(),
                                                fed_key.feUnit(),
                                                fed_key.feChan(),
                                                fed_key.fedApv());

    // Add comments
    typedef std::vector<std::string> Strings;
    Strings errors = anal->getErrorCodes();
    Strings::const_iterator istr = errors.begin();
    Strings::const_iterator jstr = errors.end();
    for (; istr != jstr; ++istr) {
      peds_tmp->addComments(*istr);
    }

    // Store description
    desc.push_back(peds_tmp);

    // Create description
    TimingAnalysisDescription* timing_tmp;
    timing_tmp = new TimingAnalysisDescription(-1.,
                                               -1.,
                                               -1.,
                                               anal->height(),
                                               anal->base(),
                                               anal->peak(),
                                               anal->frameFindingThreshold(),
                                               -1.,
                                               DaqScopeModeAnalysis::tickMarkHeightThreshold_,
                                               true,  //@@ APV timing analysis (not FED timing)
                                               fec_key.fecCrate(),
                                               fec_key.fecSlot(),
                                               fec_key.fecRing(),
                                               fec_key.ccuAddr(),
                                               fec_key.ccuChan(),
                                               SiStripFecKey::i2cAddr(fec_key.lldChan(), !iapv),
                                               db()->dbParams().partitions().begin()->second.partitionName(),
                                               db()->dbParams().partitions().begin()->second.runNumber(),
                                               anal->isValid(),
                                               "",
                                               fed_key.fedId(),
                                               fed_key.feUnit(),
                                               fed_key.feChan(),
                                               fed_key.fedApv());

    istr = errors.begin();
    jstr = errors.end();
    for (; istr != jstr; ++istr) {
      timing_tmp->addComments(*istr);
    }
    desc.push_back(timing_tmp);
  }
}