customizeHLTforCMSSW Namespace Reference

Functions
def	checkHLTfor43774 (process)
def	customiseBeamSpotFor2018Input (process)
def	customiseCTPPSFor2018Input (process)
def	customiseECALCalibrationsFor2018Input (process)
def	customiseEGammaRecoFor2018Input (process)
def	customiseFor2017DtUnpacking (process)
def	customiseFor2018Input (process)
def	customiseForOffline (process)
def	customiseHCALFor2018Input (process)
def	customisePixelGainForRun2Input (process)
def	customisePixelL1ClusterThresholdForRun2Input (process)
def	customizeHLTforCMSSW (process, menuType="GRun")

Function Documentation

checkHLTfor43774()

def customizeHLTforCMSSW.checkHLTfor43774

(

process

)

Definition at line 253 of file customizeHLTforCMSSW.py.

References common.filters_by_type(), and print().

Referenced by customizeHLTforCMSSW().

def checkHLTfor43774(process):
    filt_types = ["HLTEgammaGenericFilter","HLTEgammaGenericQuadraticEtaFilter","HLTEgammaGenericQuadraticFilter","HLTElectronGenericFilter"]
    absAbleVar = ["DEta","deta","DetaSeed","Dphi","OneOESuperMinusOneOP","OneOESeedMinusOneOP"]
    for filt_type in filt_types:
        for filt in filters_by_type(process, filt_type):
            if filt.varTag.productInstanceLabel in absAbleVar:
                if (filt.useAbs != cms.bool(True)):
                    print('# TSG WARNING: check value of parameter "useAbs" in',filt,'(expect True but is False)!')

    return process


# CMSSW version specific customizations

customiseBeamSpotFor2018Input()

def customizeHLTforCMSSW.customiseBeamSpotFor2018Input

(

process

)

Customisation for the HLT BeamSpot when running on Run-2 (2018) data:
   - For Run-2 data, disable the use of the BS transient record, in order to read the BS record from SCAL.
   - Additionally, remove all instances of OnlineBeamSpotESProducer (not needed if useTransientRecord=False).
   - See CMSHLT-2271 and CMSHLT-2300 for further details.

Definition at line 159 of file customizeHLTforCMSSW.py.

References common.esproducers_by_type(), and customizeForNoTrackerDCS.producers_by_type().

Referenced by customiseFor2018Input().

def customiseBeamSpotFor2018Input(process):
    """Customisation for the HLT BeamSpot when running on Run-2 (2018) data:
       - For Run-2 data, disable the use of the BS transient record, in order to read the BS record from SCAL.
       - Additionally, remove all instances of OnlineBeamSpotESProducer (not needed if useTransientRecord=False).
       - See CMSHLT-2271 and CMSHLT-2300 for further details.
    """
    for prod in producers_by_type(process, 'BeamSpotOnlineProducer'):
        prod.useTransientRecord = False
    onlineBeamSpotESPLabels = [prod.label_() for prod in esproducers_by_type(process, 'OnlineBeamSpotESProducer')]
    for espLabel in onlineBeamSpotESPLabels:
        delattr(process, espLabel)

    # re-introduce SCAL digis, if missing
    if not hasattr(process, 'hltScalersRawToDigi') and hasattr(process, 'HLTBeamSpot') and isinstance(process.HLTBeamSpot, cms.Sequence):

        if hasattr(process, 'hltOnlineBeamSpot'):
            process.hltOnlineBeamSpot.src = 'hltScalersRawToDigi'

        if hasattr(process, 'hltPixelTrackerHVOn'):
            process.hltPixelTrackerHVOn.DcsStatusLabel = 'hltScalersRawToDigi'

        if hasattr(process, 'hltStripTrackerHVOn'):
            process.hltStripTrackerHVOn.DcsStatusLabel = 'hltScalersRawToDigi'

        process.hltScalersRawToDigi = cms.EDProducer( "ScalersRawToDigi",
            scalersInputTag = cms.InputTag( "rawDataCollector" )
        )

        process.HLTBeamSpot.insert(0, process.hltScalersRawToDigi)

    return process

customiseCTPPSFor2018Input()

def customizeHLTforCMSSW.customiseCTPPSFor2018Input

(

process

)

Definition at line 144 of file customizeHLTforCMSSW.py.

References customizeForNoTrackerDCS.producers_by_type().

Referenced by customiseFor2018Input().

def customiseCTPPSFor2018Input(process):
    for prod in producers_by_type(process, 'CTPPSGeometryESModule'):
        prod.isRun2 = True
    for prod in producers_by_type(process, 'CTPPSPixelRawToDigi'):
        prod.isRun3 = False

    return process

customiseECALCalibrationsFor2018Input()

def customizeHLTforCMSSW.customiseECALCalibrationsFor2018Input

(

process

)

Customisation to apply the ECAL Run-2 Ultra-Legacy calibrations (CMSHLT-2339)

Definition at line 191 of file customizeHLTforCMSSW.py.

References print().

Referenced by customiseFor2018Input().

def customiseECALCalibrationsFor2018Input(process):
    """Customisation to apply the ECAL Run-2 Ultra-Legacy calibrations (CMSHLT-2339)"""
    if hasattr(process, 'GlobalTag'):
      if not hasattr(process.GlobalTag, 'toGet'):
        process.GlobalTag.toGet = cms.VPSet()
      process.GlobalTag.toGet += [
        cms.PSet(
          record = cms.string('EcalLaserAlphasRcd'),
          tag = cms.string('EcalLaserAlphas_UL_Run1_Run2_2018_lastIOV_movedTo1')
        ),
        cms.PSet(
          record = cms.string('EcalIntercalibConstantsRcd'),
          tag = cms.string('EcalIntercalibConstants_UL_Run1_Run2_2018_lastIOV_movedTo1')
        )
      ]
    else:
      print('# customiseECALCalibrationsFor2018Input -- the process.GlobalTag ESSource does not exist: no customisation applied.')

    return process

customiseEGammaRecoFor2018Input()

def customizeHLTforCMSSW.customiseEGammaRecoFor2018Input

(

process

)

Definition at line 152 of file customizeHLTforCMSSW.py.

References customizeForNoTrackerDCS.producers_by_type().

Referenced by customiseFor2018Input().

def customiseEGammaRecoFor2018Input(process):
    for prod in producers_by_type(process, 'PFECALSuperClusterProducer'):
        if hasattr(prod, 'regressionConfig'):
            prod.regressionConfig.regTrainedWithPS = cms.bool(False)

    return process

customiseFor2017DtUnpacking()

def customizeHLTforCMSSW.customiseFor2017DtUnpacking

(

process

)

Adapt the HLT to run the legacy DT unpacking
for pre2018 data/MC workflows as the default

Definition at line 67 of file customizeHLTforCMSSW.py.

def customiseFor2017DtUnpacking(process):
    """Adapt the HLT to run the legacy DT unpacking
    for pre2018 data/MC workflows as the default"""

    if hasattr(process,'hltMuonDTDigis'):
        process.hltMuonDTDigis = cms.EDProducer( "DTUnpackingModule",
            useStandardFEDid = cms.bool( True ),
            maxFEDid = cms.untracked.int32( 779 ),
            inputLabel = cms.InputTag( "rawDataCollector" ),
            minFEDid = cms.untracked.int32( 770 ),
            dataType = cms.string( "DDU" ),
            readOutParameters = cms.PSet(
                localDAQ = cms.untracked.bool( False ),
                debug = cms.untracked.bool( False ),
                rosParameters = cms.PSet(
                    localDAQ = cms.untracked.bool( False ),
                    debug = cms.untracked.bool( False ),
                    writeSC = cms.untracked.bool( True ),
                    readDDUIDfromDDU = cms.untracked.bool( True ),
                    readingDDU = cms.untracked.bool( True ),
                    performDataIntegrityMonitor = cms.untracked.bool( False )
                    ),
                performDataIntegrityMonitor = cms.untracked.bool( False )
                ),
            dqmOnly = cms.bool( False )
        )

    return process

customiseFor2018Input()

def customizeHLTforCMSSW.customiseFor2018Input

(

process

)

Customise the HLT to run on Run 2 data/MC

Definition at line 211 of file customizeHLTforCMSSW.py.

References customiseBeamSpotFor2018Input(), customiseCTPPSFor2018Input(), customiseECALCalibrationsFor2018Input(), customiseEGammaRecoFor2018Input(), customiseHCALFor2018Input(), customisePixelGainForRun2Input(), and customisePixelL1ClusterThresholdForRun2Input().

def customiseFor2018Input(process):
    """Customise the HLT to run on Run 2 data/MC"""
    process = customisePixelGainForRun2Input(process)
    process = customisePixelL1ClusterThresholdForRun2Input(process)
    process = customiseHCALFor2018Input(process)
    process = customiseCTPPSFor2018Input(process)
    process = customiseEGammaRecoFor2018Input(process)
    process = customiseBeamSpotFor2018Input(process)
    process = customiseECALCalibrationsFor2018Input(process)

    return process

customiseForOffline()

def customizeHLTforCMSSW.customiseForOffline

(

process

)

Definition at line 224 of file customizeHLTforCMSSW.py.

References common.esproducers_by_type(), and createfilelist.int.

Referenced by customizeHLTforCMSSW().

def customiseForOffline(process):
    # For running HLT offline on Run-3 Data, use "(OnlineBeamSpotESProducer).timeThreshold = 1e6",
    # in order to pick the beamspot that was actually used by the HLT (instead of a "fake" beamspot).
    # These same settings can be used offline for Run-3 Data and Run-3 MC alike.
    # Note: the products of the OnlineBeamSpotESProducer are used only
    #       if the configuration uses "(BeamSpotOnlineProducer).useTransientRecord = True".
    # See CMSHLT-2271 and CMSHLT-2300 for further details.
    for prod in esproducers_by_type(process, 'OnlineBeamSpotESProducer'):
        prod.timeThreshold = int(1e6)

    # For running HLT offline and relieve the strain on Frontier so it will no longer inject a
    # transaction id which tells Frontier to add a unique "&freshkey" to many query URLs.
    # That was intended as a feature to only be used by the Online HLT, to guarantee that fresh conditions
    # from the database were loaded at each Lumi section
    # Seee CMSHLT-3123 for further details
    if hasattr(process, 'GlobalTag'):
        # Set ReconnectEachRun and RefreshEachRun to False
        process.GlobalTag.ReconnectEachRun = cms.untracked.bool(False)
        process.GlobalTag.RefreshEachRun = cms.untracked.bool(False)

        if hasattr(process.GlobalTag, 'toGet'):
            # Filter out PSet objects containing only 'record' and 'refreshTime'
            process.GlobalTag.toGet = [
                pset for pset in process.GlobalTag.toGet
                if set(pset.parameterNames_()) != {'record', 'refreshTime'}
            ]

    return process

customiseHCALFor2018Input()

def customizeHLTforCMSSW.customiseHCALFor2018Input

(

process

)

Customise the HLT to run on Run 2 data/MC using the old readout for the HCAL barel

Definition at line 20 of file customizeHLTforCMSSW.py.

References customizeForNoTrackerDCS.producers_by_type().

Referenced by customiseFor2018Input().

def customiseHCALFor2018Input(process):
    """Customise the HLT to run on Run 2 data/MC using the old readout for the HCAL barel"""

    for producer in producers_by_type(process, "HBHEPhase1Reconstructor"):
        # switch on the QI8 processing for 2018 HCAL barrel
        producer.processQIE8 = True

    # adapt CaloTowers threshold for 2018 HCAL barrel with only one depth
    for producer in producers_by_type(process, "CaloTowersCreator"):
        producer.HBThreshold1  = 0.7
        producer.HBThreshold2  = 0.7
        producer.HBThreshold   = 0.7

    # adapt Particle Flow threshold for 2018 HCAL barrel with only one depth
    from RecoParticleFlow.PFClusterProducer.particleFlowClusterHBHE_cfi import _thresholdsHB, _thresholdsHEphase1, _seedingThresholdsHB

    logWeightDenominatorHCAL2018 = cms.VPSet(
        cms.PSet(
            depths = cms.vint32(1, 2, 3, 4),
            detector = cms.string('HCAL_BARREL1'),
            logWeightDenominator = _thresholdsHB
        ),
        cms.PSet(
            depths = cms.vint32(1, 2, 3, 4, 5, 6, 7),
            detector = cms.string('HCAL_ENDCAP'),
            logWeightDenominator = _thresholdsHEphase1
        )
    )

    for producer in producers_by_type(process, "PFRecHitProducer"):
        if producer.producers[0].name.value() == 'PFHBHERecHitCreator':
            producer.producers[0].qualityTests[0].cuts[0].threshold = _thresholdsHB

    for producer in producers_by_type(process, "PFClusterProducer"):
        if producer.seedFinder.thresholdsByDetector[0].detector.value() == 'HCAL_BARREL1':
            producer.seedFinder.thresholdsByDetector[0].seedingThreshold = _seedingThresholdsHB
            producer.initialClusteringStep.thresholdsByDetector[0].gatheringThreshold = _thresholdsHB
            producer.pfClusterBuilder.recHitEnergyNorms[0].recHitEnergyNorm = _thresholdsHB
            producer.pfClusterBuilder.positionCalc.logWeightDenominatorByDetector = logWeightDenominatorHCAL2018
            producer.pfClusterBuilder.allCellsPositionCalc.logWeightDenominatorByDetector = logWeightDenominatorHCAL2018

    for producer in producers_by_type(process, "PFMultiDepthClusterProducer"):
        producer.pfClusterBuilder.allCellsPositionCalc.logWeightDenominatorByDetector = logWeightDenominatorHCAL2018

    # done
    return process

customisePixelGainForRun2Input()

def customizeHLTforCMSSW.customisePixelGainForRun2Input

(

process

)

Customise the HLT to run on Run 2 data/MC using the old definition of the pixel calibrations

Up to 11.0.x, the pixel calibarations were fully specified in the configuration:
    VCaltoElectronGain      =   47
    VCaltoElectronGain_L1   =   50
    VCaltoElectronOffset    =  -60
    VCaltoElectronOffset_L1 = -670

Starting with 11.1.x, the calibrations for Run 3 were moved to the conditions, leaving in the configuration only:
    VCaltoElectronGain      =    1
    VCaltoElectronGain_L1   =    1
    VCaltoElectronOffset    =    0
    VCaltoElectronOffset_L1 =    0

Since the conditions for Run 2 have not been updated to the new scheme, the HLT configuration needs to be reverted.

Definition at line 96 of file customizeHLTforCMSSW.py.

References customizeForNoTrackerDCS.producers_by_type().

Referenced by customiseFor2018Input().

def customisePixelGainForRun2Input(process):
    """Customise the HLT to run on Run 2 data/MC using the old definition of the pixel calibrations

    Up to 11.0.x, the pixel calibarations were fully specified in the configuration:
        VCaltoElectronGain      =   47
        VCaltoElectronGain_L1   =   50
        VCaltoElectronOffset    =  -60
        VCaltoElectronOffset_L1 = -670

    Starting with 11.1.x, the calibrations for Run 3 were moved to the conditions, leaving in the configuration only:
        VCaltoElectronGain      =    1
        VCaltoElectronGain_L1   =    1
        VCaltoElectronOffset    =    0
        VCaltoElectronOffset_L1 =    0

    Since the conditions for Run 2 have not been updated to the new scheme, the HLT configuration needs to be reverted.
    """
    # revert the Pixel parameters to be compatible with the Run 2 conditions
    for producer in producers_by_type(process, "SiPixelClusterProducer"):
        producer.VCaltoElectronGain = 47
        producer.VCaltoElectronGain_L1 = 50
        producer.VCaltoElectronOffset = -60
        producer.VCaltoElectronOffset_L1 = -670

    for pluginType in ["SiPixelRawToClusterCUDA", "SiPixelRawToClusterCUDAPhase1", "SiPixelRawToClusterCUDAHIonPhase1"]:
        for producer in producers_by_type(process, pluginType):
            producer.VCaltoElectronGain = 47
            producer.VCaltoElectronGain_L1 = 50
            producer.VCaltoElectronOffset = -60
            producer.VCaltoElectronOffset_L1 = -670

    return process

customisePixelL1ClusterThresholdForRun2Input()

def customizeHLTforCMSSW.customisePixelL1ClusterThresholdForRun2Input

(

process

)

Definition at line 129 of file customizeHLTforCMSSW.py.

References customizeForNoTrackerDCS.producers_by_type().

Referenced by customiseFor2018Input().

def customisePixelL1ClusterThresholdForRun2Input(process):
    # revert the pixel Layer 1 cluster threshold to be compatible with Run2:
    for producer in producers_by_type(process, "SiPixelClusterProducer"):
        if hasattr(producer,"ClusterThreshold_L1"):
            producer.ClusterThreshold_L1 = 2000
    for pluginType in ["SiPixelRawToClusterCUDA", "SiPixelRawToClusterCUDAPhase1", "SiPixelRawToClusterCUDAHIonPhase1"]:
        for producer in producers_by_type(process, pluginType):
            if hasattr(producer,"clusterThreshold_layer1"):
                producer.clusterThreshold_layer1 = 2000
    for producer in producers_by_type(process, "SiPixelDigisClustersFromSoA"):
        if hasattr(producer,"clusterThreshold_layer1"):
            producer.clusterThreshold_layer1 = 2000

    return process

customizeHLTforCMSSW()

def customizeHLTforCMSSW.customizeHLTforCMSSW	(		process,
			menuType = "GRun"
	)

Definition at line 266 of file customizeHLTforCMSSW.py.

References checkHLTfor43774(), and customiseForOffline().

def customizeHLTforCMSSW(process, menuType="GRun"):

    process = customiseForOffline(process)

    # add call to action function in proper order: newest last!
    # process = customiseFor12718(process)

    process = checkHLTfor43774(process)

    return process

---

Generated for CMSSW Reference Manual by  1.8.14