Inheritance diagram for Phase2OTMonitorTTStub:

Public Member Functions
void	analyze (const edm::Event &, const edm::EventSetup &) override

void	bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override

void	dqmBeginRun (const edm::Run &iRun, const edm::EventSetup &iSetup) override

	Phase2OTMonitorTTStub (const edm::ParameterSet &)

	~Phase2OTMonitorTTStub () override

Public Member Functions inherited from DQMEDAnalyzer
void	accumulate (edm::Event const &event, edm::EventSetup const &setup) final

void	beginLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final

void	beginRun (edm::Run const &run, edm::EventSetup const &setup) final

void	beginStream (edm::StreamID id) final

	DQMEDAnalyzer ()

void	endLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final

void	endRun (edm::Run const &run, edm::EventSetup const &setup) final

virtual bool	getCanSaveByLumi ()

Public Member Functions inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
	EDProducer ()=default

	EDProducer (const EDProducer &)=delete

bool	hasAbilityToProduceInBeginLumis () const final

bool	hasAbilityToProduceInBeginProcessBlocks () const final

bool	hasAbilityToProduceInBeginRuns () const final

bool	hasAbilityToProduceInEndLumis () const final

bool	hasAbilityToProduceInEndProcessBlocks () const final

bool	hasAbilityToProduceInEndRuns () const final

const EDProducer &	operator= (const EDProducer &)=delete

Static Public Member Functions
static void	fillDescriptions (edm::ConfigurationDescriptions &descriptions)

Static Public Member Functions inherited from DQMEDAnalyzer
static void	globalEndJob (DQMEDAnalyzerGlobalCache const *)

static void	globalEndLuminosityBlockProduce (edm::LuminosityBlock &lumi, edm::EventSetup const &setup, LuminosityBlockContext const *context)

static void	globalEndRunProduce (edm::Run &run, edm::EventSetup const &setup, RunContext const *context)

static std::unique_ptr< DQMEDAnalyzerGlobalCache >	initializeGlobalCache (edm::ParameterSet const &)

Public Attributes
MonitorElement *	Stub_Barrel = nullptr

MonitorElement *	Stub_Barrel_O = nullptr

MonitorElement *	Stub_Barrel_W = nullptr

MonitorElement *	Stub_Barrel_XY = nullptr

MonitorElement *	Stub_bendBE = nullptr

MonitorElement *	Stub_bendFE = nullptr

MonitorElement *	Stub_Endcap_Bw_XY = nullptr

MonitorElement *	Stub_Endcap_Disc = nullptr

MonitorElement *	Stub_Endcap_Disc_Bw = nullptr

MonitorElement *	Stub_Endcap_Disc_Fw = nullptr

MonitorElement *	Stub_Endcap_Disc_O = nullptr

MonitorElement *	Stub_Endcap_Disc_W = nullptr

MonitorElement *	Stub_Endcap_Fw_XY = nullptr

MonitorElement *	Stub_Endcap_Ring = nullptr

MonitorElement *	Stub_Endcap_Ring_Bw [5] = {nullptr, nullptr, nullptr, nullptr, nullptr}

MonitorElement *	Stub_Endcap_Ring_Fw [5] = {nullptr, nullptr, nullptr, nullptr, nullptr}

MonitorElement *	Stub_Endcap_Ring_O = nullptr

MonitorElement *	Stub_Endcap_Ring_O_Bw [5] = {nullptr, nullptr, nullptr, nullptr, nullptr}

MonitorElement *	Stub_Endcap_Ring_O_Fw [5] = {nullptr, nullptr, nullptr, nullptr, nullptr}

MonitorElement *	Stub_Endcap_Ring_W = nullptr

MonitorElement *	Stub_Endcap_Ring_W_Bw [5]

MonitorElement *	Stub_Endcap_Ring_W_Fw [5]

MonitorElement *	Stub_Eta = nullptr

MonitorElement *	Stub_isPS = nullptr

MonitorElement *	Stub_Phi = nullptr

MonitorElement *	Stub_R = nullptr

MonitorElement *	Stub_RZ = nullptr

Private Attributes
edm::ParameterSet	conf_

const edm::ESGetToken< TrackerGeometry, TrackerDigiGeometryRecord >	geomToken_

edm::EDGetTokenT< edmNew::DetSetVector< TTStub< Ref_Phase2TrackerDigi_ > > >	tagTTStubsToken_

const TrackerGeometry *	tkGeom_ = nullptr

std::string	topFolderName_

const edm::ESGetToken< TrackerTopology, TrackerTopologyRcd >	topoToken_

const TrackerTopology *	tTopo_ = nullptr

Additional Inherited Members
Public Types inherited from DQMEDAnalyzer
typedef dqm::reco::DQMStore	DQMStore

typedef dqm::reco::MonitorElement	MonitorElement

Public Types inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
using	CacheTypes = CacheContexts< T... >

using	GlobalCache = typename CacheTypes::GlobalCache

using	HasAbility = AbilityChecker< T... >

using	InputProcessBlockCache = typename CacheTypes::InputProcessBlockCache

using	LuminosityBlockCache = typename CacheTypes::LuminosityBlockCache

using	LuminosityBlockContext = LuminosityBlockContextT< LuminosityBlockCache, RunCache, GlobalCache >

using	LuminosityBlockSummaryCache = typename CacheTypes::LuminosityBlockSummaryCache

using	RunCache = typename CacheTypes::RunCache

using	RunContext = RunContextT< RunCache, GlobalCache >

using	RunSummaryCache = typename CacheTypes::RunSummaryCache

Protected Member Functions inherited from DQMEDAnalyzer
uint64_t	meId () const

Protected Attributes inherited from DQMEDAnalyzer
edm::EDPutTokenT< DQMToken >	lumiToken_

edm::EDPutTokenT< DQMToken >	runToken_

unsigned int	streamId_

Detailed Description

Definition at line 50 of file Phase2OTMonitorTTStub.cc.

Constructor & Destructor Documentation

◆ Phase2OTMonitorTTStub()

Phase2OTMonitorTTStub::Phase2OTMonitorTTStub ( const edm::ParameterSet & iConfig )

explicit

Definition at line 107 of file Phase2OTMonitorTTStub.cc.

References conf_, edm::ParameterSet::getParameter(), AlCaHLTBitMon_QueryRunRegistry::string, tagTTStubsToken_, and topFolderName_.

     : conf_(iConfig),
       geomToken_(esConsumes<TrackerGeometry, TrackerDigiGeometryRecord, edm::Transition::BeginRun>()),
       topoToken_(esConsumes<TrackerTopology, TrackerTopologyRcd, edm::Transition::BeginRun>()) {
   // now do what ever initialization is needed
   topFolderName_ = conf_.getParameter<std::string>("TopFolderName");
   tagTTStubsToken_ =
       consumes<edmNew::DetSetVector<TTStub<Ref_Phase2TrackerDigi_>>>(conf_.getParameter<edm::InputTag>("TTStubs"));
 }

◆ ~Phase2OTMonitorTTStub()

Phase2OTMonitorTTStub::~Phase2OTMonitorTTStub ( )

override

Definition at line 117 of file Phase2OTMonitorTTStub.cc.

                                               {
   // do anything here that needs to be done at desctruction time
   // (e.g. close files, deallocate resources etc.)
 }

Member Function Documentation

◆ analyze()

void Phase2OTMonitorTTStub::analyze	(	const edm::Event &	iEvent,
		const edm::EventSetup &	iSetup
	)

overridevirtual

Track Trigger Stubs

Loop over input Stubs

Make reference stub

Get det ID (place of the stub)

Get trigger displacement/offset

Define position stub by position inner cluster

Reimplemented from DQMEDAnalyzer.

Definition at line 129 of file Phase2OTMonitorTTStub.cc.

References edmNew::DetSetVector< T >::begin(), TtSemiLepEvtBuilder_cfi::disc, edmNew::DetSetVector< T >::end(), PV3DBase< T, PVType, FrameType >::eta(), dqm::impl::MonitorElement::Fill(), TrackerGeometry::idToDet(), iEvent, edm::HandleBase::isValid(), TrackerTopology::layer(), Topology::localPosition(), edmNew::makeRefTo(), PV3DBase< T, PVType, FrameType >::perp(), PV3DBase< T, PVType, FrameType >::phi(), relativeConstraints::ring, Stub_Barrel, Stub_Barrel_O, Stub_Barrel_W, Stub_Barrel_XY, Stub_bendBE, Stub_bendFE, Stub_Endcap_Bw_XY, Stub_Endcap_Disc, Stub_Endcap_Disc_Bw, Stub_Endcap_Disc_Fw, Stub_Endcap_Disc_O, Stub_Endcap_Disc_W, Stub_Endcap_Fw_XY, Stub_Endcap_Ring, Stub_Endcap_Ring_Bw, Stub_Endcap_Ring_Fw, Stub_Endcap_Ring_O, Stub_Endcap_Ring_O_Bw, Stub_Endcap_Ring_O_Fw, Stub_Endcap_Ring_W, Stub_Endcap_Ring_W_Bw, Stub_Endcap_Ring_W_Fw, Stub_Eta, Stub_isPS, Stub_Phi, Stub_R, Stub_RZ, DetId::subdetId(), GeomDet::surface(), tagTTStubsToken_, StripSubdetector::TID, TrackerTopology::tidRing(), tkGeom_, StripSubdetector::TOB, Surface::toGlobal(), GeomDet::topology(), tTopo_, PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

                                                                                        {
   edm::Handle<edmNew::DetSetVector<TTStub<Ref_Phase2TrackerDigi_>>> Phase2TrackerDigiTTStubHandle;
   iEvent.getByToken(tagTTStubsToken_, Phase2TrackerDigiTTStubHandle);
 
   typename edmNew::DetSetVector<TTStub<Ref_Phase2TrackerDigi_>>::const_iterator inputIter;
   typename edmNew::DetSet<TTStub<Ref_Phase2TrackerDigi_>>::const_iterator contentIter;
   // Adding protection
   if (!Phase2TrackerDigiTTStubHandle.isValid())
     return;
 
   for (inputIter = Phase2TrackerDigiTTStubHandle->begin(); inputIter != Phase2TrackerDigiTTStubHandle->end();
        ++inputIter) {
     for (contentIter = inputIter->begin(); contentIter != inputIter->end(); ++contentIter) {
       edm::Ref<edmNew::DetSetVector<TTStub<Ref_Phase2TrackerDigi_>>, TTStub<Ref_Phase2TrackerDigi_>> tempStubRef =
           edmNew::makeRefTo(Phase2TrackerDigiTTStubHandle, contentIter);
 
       //  tempStubRef->getDetId() gives the stackDetId, not rawId
       DetId detIdStub = tkGeom_->idToDet((tempStubRef->clusterRef(0))->getDetId())->geographicalId();
 
       double rawBend = tempStubRef->rawBend();
       double bendOffset = tempStubRef->bendOffset();
 
       MeasurementPoint mp = (tempStubRef->clusterRef(0))->findAverageLocalCoordinates();
       const GeomDet *theGeomDet = tkGeom_->idToDet(detIdStub);
       Global3DPoint posStub = theGeomDet->surface().toGlobal(theGeomDet->topology().localPosition(mp));
 
       Stub_Eta->Fill(posStub.eta());
       Stub_Phi->Fill(posStub.phi());
       Stub_R->Fill(posStub.perp());
       Stub_RZ->Fill(posStub.z(), posStub.perp());
       Stub_bendFE->Fill(tempStubRef->bendFE());
       Stub_bendBE->Fill(tempStubRef->bendBE());
       Stub_isPS->Fill(tempStubRef->moduleTypePS());
 
       if (detIdStub.subdetId() == static_cast<int>(StripSubdetector::TOB)) {  // Phase 2 Outer Tracker Barrel
         Stub_Barrel->Fill(tTopo_->layer(detIdStub));
         Stub_Barrel_XY->Fill(posStub.x(), posStub.y());
         Stub_Barrel_W->Fill(tTopo_->layer(detIdStub), rawBend - bendOffset);
         Stub_Barrel_O->Fill(tTopo_->layer(detIdStub), bendOffset);
       } else if (detIdStub.subdetId() == static_cast<int>(StripSubdetector::TID)) {  // Phase 2 Outer Tracker Endcap
         int disc = tTopo_->layer(detIdStub);                                         // returns wheel
         int ring = tTopo_->tidRing(detIdStub);
         Stub_Endcap_Disc->Fill(disc);
         Stub_Endcap_Ring->Fill(ring);
         Stub_Endcap_Disc_W->Fill(disc, rawBend - bendOffset);
         Stub_Endcap_Ring_W->Fill(ring, rawBend - bendOffset);
         Stub_Endcap_Disc_O->Fill(disc, bendOffset);
         Stub_Endcap_Ring_O->Fill(ring, bendOffset);
 
         if (posStub.z() > 0) {
           Stub_Endcap_Fw_XY->Fill(posStub.x(), posStub.y());
           Stub_Endcap_Disc_Fw->Fill(disc);
           Stub_Endcap_Ring_Fw[disc - 1]->Fill(ring);
           Stub_Endcap_Ring_W_Fw[disc - 1]->Fill(ring, rawBend - bendOffset);
           Stub_Endcap_Ring_O_Fw[disc - 1]->Fill(ring, bendOffset);
         } else {
           Stub_Endcap_Bw_XY->Fill(posStub.x(), posStub.y());
           Stub_Endcap_Disc_Bw->Fill(disc);
           Stub_Endcap_Ring_Bw[disc - 1]->Fill(ring);
           Stub_Endcap_Ring_W_Bw[disc - 1]->Fill(ring, rawBend - bendOffset);
           Stub_Endcap_Ring_O_Bw[disc - 1]->Fill(ring, bendOffset);
         }
       }
     }
   }
 }  // end of method

◆ bookHistograms()

void Phase2OTMonitorTTStub::bookHistograms	(	DQMStore::IBooker &	iBooker,
		edm::Run const &	run,
		edm::EventSetup const &	es
	)

overridevirtual

Implements DQMEDAnalyzer.

Definition at line 203 of file Phase2OTMonitorTTStub.cc.

References dqm::implementation::IBooker::book1D(), dqm::implementation::IBooker::book2D(), conf_, edm::ParameterSet::getParameter(), mps_fire::i, dqm::impl::MonitorElement::setAxisTitle(), dqm::implementation::NavigatorBase::setCurrentFolder(), AlCaHLTBitMon_QueryRunRegistry::string, Stub_Barrel, Stub_Barrel_O, Stub_Barrel_W, Stub_Barrel_XY, Stub_bendBE, Stub_bendFE, Stub_Endcap_Bw_XY, Stub_Endcap_Disc, Stub_Endcap_Disc_Bw, Stub_Endcap_Disc_Fw, Stub_Endcap_Disc_O, Stub_Endcap_Disc_W, Stub_Endcap_Fw_XY, Stub_Endcap_Ring, Stub_Endcap_Ring_Bw, Stub_Endcap_Ring_Fw, Stub_Endcap_Ring_O, Stub_Endcap_Ring_O_Bw, Stub_Endcap_Ring_O_Fw, Stub_Endcap_Ring_W, Stub_Endcap_Ring_W_Bw, Stub_Endcap_Ring_W_Fw, Stub_Eta, Stub_isPS, Stub_Phi, Stub_R, Stub_RZ, to_string(), and topFolderName_.

                                                                                                                {
   std::string HistoName;
   const int numDiscs = 5;
   iBooker.setCurrentFolder(topFolderName_ + "/Stubs/Position");
 
   edm::ParameterSet psTTStub_Barrel_XY = conf_.getParameter<edm::ParameterSet>("TH2TTStub_Position");
   HistoName = "Stub_Barrel_XY";
   Stub_Barrel_XY = iBooker.book2D(HistoName,
                                   HistoName,
                                   psTTStub_Barrel_XY.getParameter<int32_t>("Nbinsx"),
                                   psTTStub_Barrel_XY.getParameter<double>("xmin"),
                                   psTTStub_Barrel_XY.getParameter<double>("xmax"),
                                   psTTStub_Barrel_XY.getParameter<int32_t>("Nbinsy"),
                                   psTTStub_Barrel_XY.getParameter<double>("ymin"),
                                   psTTStub_Barrel_XY.getParameter<double>("ymax"));
   Stub_Barrel_XY->setAxisTitle("L1 Stub Barrel position x [cm]", 1);
   Stub_Barrel_XY->setAxisTitle("L1 Stub Barrel position y [cm]", 2);
 
   edm::ParameterSet psTTStub_Endcap_Fw_XY = conf_.getParameter<edm::ParameterSet>("TH2TTStub_Position");
   HistoName = "Stub_Endcap_Fw_XY";
   Stub_Endcap_Fw_XY = iBooker.book2D(HistoName,
                                      HistoName,
                                      psTTStub_Endcap_Fw_XY.getParameter<int32_t>("Nbinsx"),
                                      psTTStub_Endcap_Fw_XY.getParameter<double>("xmin"),
                                      psTTStub_Endcap_Fw_XY.getParameter<double>("xmax"),
                                      psTTStub_Endcap_Fw_XY.getParameter<int32_t>("Nbinsy"),
                                      psTTStub_Endcap_Fw_XY.getParameter<double>("ymin"),
                                      psTTStub_Endcap_Fw_XY.getParameter<double>("ymax"));
   Stub_Endcap_Fw_XY->setAxisTitle("L1 Stub Endcap position x [cm]", 1);
   Stub_Endcap_Fw_XY->setAxisTitle("L1 Stub Endcap position y [cm]", 2);
 
   edm::ParameterSet psTTStub_Endcap_Bw_XY = conf_.getParameter<edm::ParameterSet>("TH2TTStub_Position");
   HistoName = "Stub_Endcap_Bw_XY";
   Stub_Endcap_Bw_XY = iBooker.book2D(HistoName,
                                      HistoName,
                                      psTTStub_Endcap_Bw_XY.getParameter<int32_t>("Nbinsx"),
                                      psTTStub_Endcap_Bw_XY.getParameter<double>("xmin"),
                                      psTTStub_Endcap_Bw_XY.getParameter<double>("xmax"),
                                      psTTStub_Endcap_Bw_XY.getParameter<int32_t>("Nbinsy"),
                                      psTTStub_Endcap_Bw_XY.getParameter<double>("ymin"),
                                      psTTStub_Endcap_Bw_XY.getParameter<double>("ymax"));
   Stub_Endcap_Bw_XY->setAxisTitle("L1 Stub Endcap position x [cm]", 1);
   Stub_Endcap_Bw_XY->setAxisTitle("L1 Stub Endcap position y [cm]", 2);
 
   // TTStub #rho vs. z
   edm::ParameterSet psTTStub_RZ = conf_.getParameter<edm::ParameterSet>("TH2TTStub_RZ");
   HistoName = "Stub_RZ";
   Stub_RZ = iBooker.book2D(HistoName,
                            HistoName,
                            psTTStub_RZ.getParameter<int32_t>("Nbinsx"),
                            psTTStub_RZ.getParameter<double>("xmin"),
                            psTTStub_RZ.getParameter<double>("xmax"),
                            psTTStub_RZ.getParameter<int32_t>("Nbinsy"),
                            psTTStub_RZ.getParameter<double>("ymin"),
                            psTTStub_RZ.getParameter<double>("ymax"));
   Stub_RZ->setAxisTitle("L1 Stub position z [cm]", 1);
   Stub_RZ->setAxisTitle("L1 Stub position #rho [cm]", 2);
 
   iBooker.setCurrentFolder(topFolderName_ + "/Stubs");
   // TTStub eta
   edm::ParameterSet psTTStub_Eta = conf_.getParameter<edm::ParameterSet>("TH1TTStub_Eta");
   HistoName = "Stub_Eta";
   Stub_Eta = iBooker.book1D(HistoName,
                             HistoName,
                             psTTStub_Eta.getParameter<int32_t>("Nbinsx"),
                             psTTStub_Eta.getParameter<double>("xmin"),
                             psTTStub_Eta.getParameter<double>("xmax"));
   Stub_Eta->setAxisTitle("#eta", 1);
   Stub_Eta->setAxisTitle("# L1 Stubs ", 2);
 
   // TTStub phi
   edm::ParameterSet psTTStub_Phi = conf_.getParameter<edm::ParameterSet>("TH1TTStub_Phi");
   HistoName = "Stub_Phi";
   Stub_Phi = iBooker.book1D(HistoName,
                             HistoName,
                             psTTStub_Phi.getParameter<int32_t>("Nbinsx"),
                             psTTStub_Phi.getParameter<double>("xmin"),
                             psTTStub_Phi.getParameter<double>("xmax"));
   Stub_Phi->setAxisTitle("#phi", 1);
   Stub_Phi->setAxisTitle("# L1 Stubs ", 2);
 
   // TTStub R
   edm::ParameterSet psTTStub_R = conf_.getParameter<edm::ParameterSet>("TH1TTStub_R");
   HistoName = "Stub_R";
   Stub_R = iBooker.book1D(HistoName,
                           HistoName,
                           psTTStub_R.getParameter<int32_t>("Nbinsx"),
                           psTTStub_R.getParameter<double>("xmin"),
                           psTTStub_R.getParameter<double>("xmax"));
   Stub_R->setAxisTitle("R", 1);
   Stub_R->setAxisTitle("# L1 Stubs ", 2);
 
   // TTStub trigger bend
   edm::ParameterSet psTTStub_bend = conf_.getParameter<edm::ParameterSet>("TH1TTStub_bend");
   HistoName = "Stub_bendFE";
   Stub_bendFE = iBooker.book1D(HistoName,
                                HistoName,
                                psTTStub_bend.getParameter<int32_t>("Nbinsx"),
                                psTTStub_bend.getParameter<double>("xmin"),
                                psTTStub_bend.getParameter<double>("xmax"));
   Stub_bendFE->setAxisTitle("Trigger bend", 1);
   Stub_bendFE->setAxisTitle("# L1 Stubs ", 2);
 
   // TTStub hardware bend
   HistoName = "Stub_bendBE";
   Stub_bendBE = iBooker.book1D(HistoName,
                                HistoName,
                                psTTStub_bend.getParameter<int32_t>("Nbinsx"),
                                psTTStub_bend.getParameter<double>("xmin"),
                                psTTStub_bend.getParameter<double>("xmax"));
   Stub_bendBE->setAxisTitle("Hardware bend", 1);
   Stub_bendBE->setAxisTitle("# L1 Stubs ", 2);
 
   // TTStub, is PS?
   edm::ParameterSet psTTStub_isPS = conf_.getParameter<edm::ParameterSet>("TH1TTStub_isPS");
   HistoName = "Stub_isPS";
   Stub_isPS = iBooker.book1D(HistoName,
                              HistoName,
                              psTTStub_isPS.getParameter<int32_t>("Nbinsx"),
                              psTTStub_isPS.getParameter<double>("xmin"),
                              psTTStub_isPS.getParameter<double>("xmax"));
   Stub_isPS->setAxisTitle("Is PS?", 1);
   Stub_isPS->setAxisTitle("# L1 Stubs ", 2);
 
   iBooker.setCurrentFolder(topFolderName_ + "/Stubs/NStubs");
   // TTStub barrel stack
   edm::ParameterSet psTTStub_Barrel = conf_.getParameter<edm::ParameterSet>("TH1TTStub_Layers");
   HistoName = "NStubs_Barrel";
   Stub_Barrel = iBooker.book1D(HistoName,
                                HistoName,
                                psTTStub_Barrel.getParameter<int32_t>("Nbinsx"),
                                psTTStub_Barrel.getParameter<double>("xmin"),
                                psTTStub_Barrel.getParameter<double>("xmax"));
   Stub_Barrel->setAxisTitle("Barrel Layer", 1);
   Stub_Barrel->setAxisTitle("# L1 Stubs ", 2);
 
   // TTStub Endcap stack
   edm::ParameterSet psTTStub_ECDisc = conf_.getParameter<edm::ParameterSet>("TH1TTStub_Discs");
   HistoName = "NStubs_Endcap_Disc";
   Stub_Endcap_Disc = iBooker.book1D(HistoName,
                                     HistoName,
                                     psTTStub_ECDisc.getParameter<int32_t>("Nbinsx"),
                                     psTTStub_ECDisc.getParameter<double>("xmin"),
                                     psTTStub_ECDisc.getParameter<double>("xmax"));
   Stub_Endcap_Disc->setAxisTitle("Endcap Disc", 1);
   Stub_Endcap_Disc->setAxisTitle("# L1 Stubs ", 2);
 
   // TTStub Endcap stack
   HistoName = "NStubs_Endcap_Disc_Fw";
   Stub_Endcap_Disc_Fw = iBooker.book1D(HistoName,
                                        HistoName,
                                        psTTStub_ECDisc.getParameter<int32_t>("Nbinsx"),
                                        psTTStub_ECDisc.getParameter<double>("xmin"),
                                        psTTStub_ECDisc.getParameter<double>("xmax"));
   Stub_Endcap_Disc_Fw->setAxisTitle("Forward Endcap Disc", 1);
   Stub_Endcap_Disc_Fw->setAxisTitle("# L1 Stubs ", 2);
 
   // TTStub Endcap stack
   HistoName = "NStubs_Endcap_Disc_Bw";
   Stub_Endcap_Disc_Bw = iBooker.book1D(HistoName,
                                        HistoName,
                                        psTTStub_ECDisc.getParameter<int32_t>("Nbinsx"),
                                        psTTStub_ECDisc.getParameter<double>("xmin"),
                                        psTTStub_ECDisc.getParameter<double>("xmax"));
   Stub_Endcap_Disc_Bw->setAxisTitle("Backward Endcap Disc", 1);
   Stub_Endcap_Disc_Bw->setAxisTitle("# L1 Stubs ", 2);
 
   edm::ParameterSet psTTStub_ECRing = conf_.getParameter<edm::ParameterSet>("TH1TTStub_Rings");
   HistoName = "NStubs_Endcap_Ring";
   Stub_Endcap_Ring = iBooker.book1D(HistoName,
                                     HistoName,
                                     psTTStub_ECRing.getParameter<int32_t>("Nbinsx"),
                                     psTTStub_ECRing.getParameter<double>("xmin"),
                                     psTTStub_ECRing.getParameter<double>("xmax"));
   Stub_Endcap_Ring->setAxisTitle("Endcap Ring", 1);
   Stub_Endcap_Ring->setAxisTitle("# L1 Stubs ", 2);
 
   for (int i = 0; i < numDiscs; i++) {
     HistoName = "NStubs_Disc+" + std::to_string(i + 1);
     // TTStub Endcap stack
     Stub_Endcap_Ring_Fw[i] = iBooker.book1D(HistoName,
                                             HistoName,
                                             psTTStub_ECRing.getParameter<int32_t>("Nbinsx"),
                                             psTTStub_ECRing.getParameter<double>("xmin"),
                                             psTTStub_ECRing.getParameter<double>("xmax"));
     Stub_Endcap_Ring_Fw[i]->setAxisTitle("Endcap Ring", 1);
     Stub_Endcap_Ring_Fw[i]->setAxisTitle("# L1 Stubs ", 2);
   }
 
   for (int i = 0; i < numDiscs; i++) {
     HistoName = "NStubs_Disc-" + std::to_string(i + 1);
     // TTStub Endcap stack
     Stub_Endcap_Ring_Bw[i] = iBooker.book1D(HistoName,
                                             HistoName,
                                             psTTStub_ECRing.getParameter<int32_t>("Nbinsx"),
                                             psTTStub_ECRing.getParameter<double>("xmin"),
                                             psTTStub_ECRing.getParameter<double>("xmax"));
     Stub_Endcap_Ring_Bw[i]->setAxisTitle("Endcap Ring", 1);
     Stub_Endcap_Ring_Bw[i]->setAxisTitle("# L1 Stubs ", 2);
   }
 
   // TTStub displ/offset
   edm::ParameterSet psTTStub_Barrel_2D = conf_.getParameter<edm::ParameterSet>("TH2TTStub_DisOf_Layer");
   edm::ParameterSet psTTStub_ECDisc_2D = conf_.getParameter<edm::ParameterSet>("TH2TTStub_DisOf_Disc");
   edm::ParameterSet psTTStub_ECRing_2D = conf_.getParameter<edm::ParameterSet>("TH2TTStub_DisOf_Ring");
 
   iBooker.setCurrentFolder(topFolderName_ + "/Stubs/Width");
   HistoName = "Stub_Width_Barrel";
   Stub_Barrel_W = iBooker.book2D(HistoName,
                                  HistoName,
                                  psTTStub_Barrel_2D.getParameter<int32_t>("Nbinsx"),
                                  psTTStub_Barrel_2D.getParameter<double>("xmin"),
                                  psTTStub_Barrel_2D.getParameter<double>("xmax"),
                                  psTTStub_Barrel_2D.getParameter<int32_t>("Nbinsy"),
                                  psTTStub_Barrel_2D.getParameter<double>("ymin"),
                                  psTTStub_Barrel_2D.getParameter<double>("ymax"));
   Stub_Barrel_W->setAxisTitle("Barrel Layer", 1);
   Stub_Barrel_W->setAxisTitle("Displacement - Offset", 2);
 
   HistoName = "Stub_Width_Endcap_Disc";
   Stub_Endcap_Disc_W = iBooker.book2D(HistoName,
                                       HistoName,
                                       psTTStub_ECDisc_2D.getParameter<int32_t>("Nbinsx"),
                                       psTTStub_ECDisc_2D.getParameter<double>("xmin"),
                                       psTTStub_ECDisc_2D.getParameter<double>("xmax"),
                                       psTTStub_ECDisc_2D.getParameter<int32_t>("Nbinsy"),
                                       psTTStub_ECDisc_2D.getParameter<double>("ymin"),
                                       psTTStub_ECDisc_2D.getParameter<double>("ymax"));
   Stub_Endcap_Disc_W->setAxisTitle("Endcap Disc", 1);
   Stub_Endcap_Disc_W->setAxisTitle("Displacement - Offset", 2);
 
   HistoName = "Stub_Width_Endcap_Ring";
   Stub_Endcap_Ring_W = iBooker.book2D(HistoName,
                                       HistoName,
                                       psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
                                       psTTStub_ECRing_2D.getParameter<double>("xmin"),
                                       psTTStub_ECRing_2D.getParameter<double>("xmax"),
                                       psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
                                       psTTStub_ECRing_2D.getParameter<double>("ymin"),
                                       psTTStub_ECRing_2D.getParameter<double>("ymax"));
   Stub_Endcap_Ring_W->setAxisTitle("Endcap Ring", 1);
   Stub_Endcap_Ring_W->setAxisTitle("Trigger Offset", 2);
 
   for (int i = 0; i < numDiscs; i++) {
     HistoName = "Stub_Width_Disc+" + std::to_string(i + 1);
     Stub_Endcap_Ring_W_Fw[i] = iBooker.book2D(HistoName,
                                               HistoName,
                                               psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
                                               psTTStub_ECRing_2D.getParameter<double>("xmin"),
                                               psTTStub_ECRing_2D.getParameter<double>("xmax"),
                                               psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
                                               psTTStub_ECRing_2D.getParameter<double>("ymin"),
                                               psTTStub_ECRing_2D.getParameter<double>("ymax"));
     Stub_Endcap_Ring_W_Fw[i]->setAxisTitle("Endcap Ring", 1);
     Stub_Endcap_Ring_W_Fw[i]->setAxisTitle("Displacement - Offset", 2);
   }
 
   for (int i = 0; i < numDiscs; i++) {
     HistoName = "Stub_Width_Disc-" + std::to_string(i + 1);
     Stub_Endcap_Ring_W_Bw[i] = iBooker.book2D(HistoName,
                                               HistoName,
                                               psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
                                               psTTStub_ECRing_2D.getParameter<double>("xmin"),
                                               psTTStub_ECRing_2D.getParameter<double>("xmax"),
                                               psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
                                               psTTStub_ECRing_2D.getParameter<double>("ymin"),
                                               psTTStub_ECRing_2D.getParameter<double>("ymax"));
     Stub_Endcap_Ring_W_Bw[i]->setAxisTitle("Endcap Ring", 1);
     Stub_Endcap_Ring_W_Bw[i]->setAxisTitle("Displacement - Offset", 2);
   }
 
   iBooker.setCurrentFolder(topFolderName_ + "/Stubs/Offset");
   HistoName = "Stub_Offset_Barrel";
   Stub_Barrel_O = iBooker.book2D(HistoName,
                                  HistoName,
                                  psTTStub_Barrel_2D.getParameter<int32_t>("Nbinsx"),
                                  psTTStub_Barrel_2D.getParameter<double>("xmin"),
                                  psTTStub_Barrel_2D.getParameter<double>("xmax"),
                                  psTTStub_Barrel_2D.getParameter<int32_t>("Nbinsy"),
                                  psTTStub_Barrel_2D.getParameter<double>("ymin"),
                                  psTTStub_Barrel_2D.getParameter<double>("ymax"));
   Stub_Barrel_O->setAxisTitle("Barrel Layer", 1);
   Stub_Barrel_O->setAxisTitle("Trigger Offset", 2);
 
   HistoName = "Stub_Offset_Endcap_Disc";
   Stub_Endcap_Disc_O = iBooker.book2D(HistoName,
                                       HistoName,
                                       psTTStub_ECDisc_2D.getParameter<int32_t>("Nbinsx"),
                                       psTTStub_ECDisc_2D.getParameter<double>("xmin"),
                                       psTTStub_ECDisc_2D.getParameter<double>("xmax"),
                                       psTTStub_ECDisc_2D.getParameter<int32_t>("Nbinsy"),
                                       psTTStub_ECDisc_2D.getParameter<double>("ymin"),
                                       psTTStub_ECDisc_2D.getParameter<double>("ymax"));
   Stub_Endcap_Disc_O->setAxisTitle("Endcap Disc", 1);
   Stub_Endcap_Disc_O->setAxisTitle("Trigger Offset", 2);
 
   HistoName = "Stub_Offset_Endcap_Ring";
   Stub_Endcap_Ring_O = iBooker.book2D(HistoName,
                                       HistoName,
                                       psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
                                       psTTStub_ECRing_2D.getParameter<double>("xmin"),
                                       psTTStub_ECRing_2D.getParameter<double>("xmax"),
                                       psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
                                       psTTStub_ECRing_2D.getParameter<double>("ymin"),
                                       psTTStub_ECRing_2D.getParameter<double>("ymax"));
   Stub_Endcap_Ring_O->setAxisTitle("Endcap Ring", 1);
   Stub_Endcap_Ring_O->setAxisTitle("Trigger Offset", 2);
 
   for (int i = 0; i < numDiscs; i++) {
     HistoName = "Stub_Offset_Disc+" + std::to_string(i + 1);
     Stub_Endcap_Ring_O_Fw[i] = iBooker.book2D(HistoName,
                                               HistoName,
                                               psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
                                               psTTStub_ECRing_2D.getParameter<double>("xmin"),
                                               psTTStub_ECRing_2D.getParameter<double>("xmax"),
                                               psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
                                               psTTStub_ECRing_2D.getParameter<double>("ymin"),
                                               psTTStub_ECRing_2D.getParameter<double>("ymax"));
     Stub_Endcap_Ring_O_Fw[i]->setAxisTitle("Endcap Ring", 1);
     Stub_Endcap_Ring_O_Fw[i]->setAxisTitle("Trigger Offset", 2);
   }
 
   for (int i = 0; i < numDiscs; i++) {
     HistoName = "Stub_Offset_Disc-" + std::to_string(i + 1);
     Stub_Endcap_Ring_O_Bw[i] = iBooker.book2D(HistoName,
                                               HistoName,
                                               psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsx"),
                                               psTTStub_ECRing_2D.getParameter<double>("xmin"),
                                               psTTStub_ECRing_2D.getParameter<double>("xmax"),
                                               psTTStub_ECRing_2D.getParameter<int32_t>("Nbinsy"),
                                               psTTStub_ECRing_2D.getParameter<double>("ymin"),
                                               psTTStub_ECRing_2D.getParameter<double>("ymax"));
     Stub_Endcap_Ring_O_Bw[i]->setAxisTitle("Endcap Ring", 1);
     Stub_Endcap_Ring_O_Bw[i]->setAxisTitle("Trigger Offset", 2);
   }
 }

◆ dqmBeginRun()

void Phase2OTMonitorTTStub::dqmBeginRun	(	const edm::Run &	iRun,
		const edm::EventSetup &	iSetup
	)

overridevirtual

Reimplemented from DQMEDAnalyzer.

Definition at line 122 of file Phase2OTMonitorTTStub.cc.

References geomToken_, edm::EventSetup::getData(), tkGeom_, topoToken_, and tTopo_.

                                                                                        {
   tkGeom_ = &(iSetup.getData(geomToken_));
   tTopo_ = &(iSetup.getData(topoToken_));
 }

◆ fillDescriptions()

void Phase2OTMonitorTTStub::fillDescriptions ( edm::ConfigurationDescriptions & descriptions )

static

Definition at line 539 of file Phase2OTMonitorTTStub.cc.

References edm::ConfigurationDescriptions::add(), edm::ParameterSetDescription::add(), submitPVResolutionJobs::desc, ProducerED_cfi::InputTag, and AlCaHLTBitMon_QueryRunRegistry::string.

                                                                                        {
   // Phase2OTMonitorTTStub
   edm::ParameterSetDescription desc;
   {
     edm::ParameterSetDescription psd0;
     psd0.add<int>("Nbinsx", 960);
     psd0.add<double>("xmax", 120);
     psd0.add<double>("xmin", -120);
     psd0.add<int>("Nbinsy", 960);
     psd0.add<double>("ymax", 120);
     psd0.add<double>("ymin", -120);
     desc.add<edm::ParameterSetDescription>("TH2TTStub_Position", psd0);
   }
   {
     edm::ParameterSetDescription psd0;
     psd0.add<int>("Nbinsx", 900);
     psd0.add<double>("xmax", 300);
     psd0.add<double>("xmin", -300);
     psd0.add<int>("Nbinsy", 900);
     psd0.add<double>("ymax", 120);
     psd0.add<double>("ymin", 0);
     desc.add<edm::ParameterSetDescription>("TH2TTStub_RZ", psd0);
   }
   {
     edm::ParameterSetDescription psd0;
     psd0.add<int>("Nbinsx", 45);
     psd0.add<double>("xmin", -5);
     psd0.add<double>("xmax", 5);
     desc.add<edm::ParameterSetDescription>("TH1TTStub_Eta", psd0);
   }
   {
     edm::ParameterSetDescription psd0;
     psd0.add<int>("Nbinsx", 60);
     psd0.add<double>("xmin", -3.5);
     psd0.add<double>("xmax", 3.5);
     desc.add<edm::ParameterSetDescription>("TH1TTStub_Phi", psd0);
   }
   {
     edm::ParameterSetDescription psd0;
     psd0.add<int>("Nbinsx", 45);
     psd0.add<double>("xmin", 0);
     psd0.add<double>("xmax", 120);
     desc.add<edm::ParameterSetDescription>("TH1TTStub_R", psd0);
   }
   {
     edm::ParameterSetDescription psd0;
     psd0.add<int>("Nbinsx", 69);
     psd0.add<double>("xmin", -8.625);
     psd0.add<double>("xmax", 8.625);
     desc.add<edm::ParameterSetDescription>("TH1TTStub_bend", psd0);
   }
   {
     edm::ParameterSetDescription psd0;
     psd0.add<int>("Nbinsx", 2);
     psd0.add<double>("xmin", 0.0);
     psd0.add<double>("xmax", 2.0);
     desc.add<edm::ParameterSetDescription>("TH1TTStub_isPS", psd0);
   }
   {
     edm::ParameterSetDescription psd0;
     psd0.add<int>("Nbinsx", 7);
     psd0.add<double>("xmin", 0.5);
     psd0.add<double>("xmax", 7.5);
     desc.add<edm::ParameterSetDescription>("TH1TTStub_Layers", psd0);
   }
   {
     edm::ParameterSetDescription psd0;
     psd0.add<int>("Nbinsx", 6);
     psd0.add<double>("xmin", 0.5);
     psd0.add<double>("xmax", 6.5);
     desc.add<edm::ParameterSetDescription>("TH1TTStub_Discs", psd0);
   }
   {
     edm::ParameterSetDescription psd0;
     psd0.add<int>("Nbinsx", 16);
     psd0.add<double>("xmin", 0.5);
     psd0.add<double>("xmax", 16.5);
     desc.add<edm::ParameterSetDescription>("TH1TTStub_Rings", psd0);
   }
   {
     edm::ParameterSetDescription psd0;
     psd0.add<int>("Nbinsx", 6);
     psd0.add<double>("xmax", 6.5);
     psd0.add<double>("xmin", 0.5);
     psd0.add<int>("Nbinsy", 43);
     psd0.add<double>("ymax", 10.75);
     psd0.add<double>("ymin", -10.75);
     desc.add<edm::ParameterSetDescription>("TH2TTStub_DisOf_Layer", psd0);
   }
   {
     edm::ParameterSetDescription psd0;
     psd0.add<int>("Nbinsx", 5);
     psd0.add<double>("xmax", 5.5);
     psd0.add<double>("xmin", 0.5);
     psd0.add<int>("Nbinsy", 43);
     psd0.add<double>("ymax", 10.75);
     psd0.add<double>("ymin", -10.75);
     desc.add<edm::ParameterSetDescription>("TH2TTStub_DisOf_Disc", psd0);
   }
   {
     edm::ParameterSetDescription psd0;
     psd0.add<int>("Nbinsx", 16);
     psd0.add<double>("xmax", 16.5);
     psd0.add<double>("xmin", 0.5);
     psd0.add<int>("Nbinsy", 43);
     psd0.add<double>("ymax", 10.75);
     psd0.add<double>("ymin", -10.75);
     desc.add<edm::ParameterSetDescription>("TH2TTStub_DisOf_Ring", psd0);
   }
   desc.add<std::string>("TopFolderName", "TrackerPhase2OTStub");
   desc.add<edm::InputTag>("TTStubs", edm::InputTag("TTStubsFromPhase2TrackerDigis", "StubAccepted"));
   descriptions.add("Phase2OTMonitorTTStub", desc);
   // or use the following to generate the label from the module's C++ type
   //descriptions.addWithDefaultLabel(desc);
 }