#include <MuonPathSLFitter.h>

Inheritance diagram for MuonPathSLFitter:

Public Member Functions
void	finish () override

void	initialise (const edm::EventSetup &iEventSetup) override

	MuonPathSLFitter (const edm::ParameterSet &pset, edm::ConsumesCollector &iC, std::shared_ptr< GlobalCoordsObtainer > &globalcoordsobtainer)

void	run (edm::Event &iEvent, const edm::EventSetup &iEventSetup, MuonPathPtrs &inMpath, std::vector< cmsdt::metaPrimitive > &metaPrimitives) override

void	run (edm::Event &iEvent, const edm::EventSetup &iEventSetup, MuonPathPtrs &inMpath, std::vector< lat_vector > &lateralities, std::vector< cmsdt::metaPrimitive > &metaPrimitives) override

void	run (edm::Event &iEvent, const edm::EventSetup &iEventSetup, std::vector< cmsdt::metaPrimitive > &inMPaths, std::vector< cmsdt::metaPrimitive > &outMPaths) override

void	run (edm::Event &iEvent, const edm::EventSetup &iEventSetup, MuonPathPtrs &inMpath, MuonPathPtrs &outMPath) override

	~MuonPathSLFitter () override

Public Member Functions inherited from MuonPathFitter
fit_common_out_t	fit (fit_common_in_t fit_common_in, int XI_WIDTH, int COEFF_WIDTH_T0, int COEFF_WIDTH_POSITION, int COEFF_WIDTH_SLOPE, int PRECISSION_T0, int PRECISSION_POSITION, int PRECISSION_SLOPE, int PROD_RESIZE_T0, int PROD_RESIZE_POSITION, int PROD_RESIZE_SLOPE, int MAX_DRIFT_TDC, int sl)

int	get_rom_addr (MuonPathPtr &inMPath, latcomb lats)

bool	hasPosRF (int wh, int sec)

	MuonPathFitter (const edm::ParameterSet &pset, edm::ConsumesCollector &iC, std::shared_ptr< GlobalCoordsObtainer > &globalcoordsobtainer)

coeffs_t	RomDataConvert (std::vector< int > slv, short COEFF_WIDTH_T0, short COEFF_WIDTH_POSITION, short COEFF_WIDTH_SLOPE, short LOLY, short HILY)

void	setChi2Th (double chi2Th)

void	setTanPhiTh (double tanPhiTh)

	~MuonPathFitter () override

Public Member Functions inherited from MuonPathAnalyzer
	MuonPathAnalyzer (const edm::ParameterSet &pset, edm::ConsumesCollector &iC)

virtual	~MuonPathAnalyzer ()

Public Attributes
edm::FileInPath	shift_theta_filename_

std::map< int, float >	shiftthetainfo_

edm::FileInPath	sl1_filename_

edm::FileInPath	sl2_filename_

edm::FileInPath	sl3_filename_

Public Attributes inherited from MuonPathFitter
double	chi2Th_

const bool	debug_

DTGeometry const *	dtGeo_

edm::ESGetToken< DTGeometry, MuonGeometryRecord >	dtGeomH

std::shared_ptr< GlobalCoordsObtainer >	globalcoordsobtainer_

int	max_drift_tdc = -1

edm::FileInPath	maxdrift_filename_

int	maxdriftinfo_ [5][4][14]

edm::FileInPath	shift_filename_

std::map< int, float >	shiftinfo_

double	tanPhiTh_

Private Member Functions
void	analyze (MuonPathPtr &inMPath, lat_vector lat_combs, std::vector< cmsdt::metaPrimitive > &metaPrimitives)

void	fillLuts ()

int	get_rom_addr (MuonPathPtr &inMPath, latcomb lats)

Private Attributes
std::vector< std::vector< int > >	lut_sl1

std::vector< std::vector< int > >	lut_sl2

std::vector< std::vector< int > >	lut_sl3

Detailed Description

Definition at line 14 of file MuonPathSLFitter.h.

Constructor & Destructor Documentation

◆ MuonPathSLFitter()

MuonPathSLFitter::MuonPathSLFitter	(	const edm::ParameterSet &	pset,
		edm::ConsumesCollector &	iC,
		std::shared_ptr< GlobalCoordsObtainer > &	globalcoordsobtainer
	)

Definition at line 11 of file MuonPathSLFitter.cc.

References MuonPathFitter::debug_, Exception, fillLuts(), edm::FileInPath::fullPath(), LogDebug, muonDTDigis_cfi::pset, nano_mu_digi_cff::rawId, MuonPathFitter::setChi2Th(), MuonPathFitter::setTanPhiTh(), edm::shift, shift_theta_filename_, shiftthetainfo_, sl1_filename_, sl2_filename_, and sl3_filename_.

     : MuonPathFitter(pset, iC, globalcoordsobtainer) {
   if (debug_)
     LogDebug("MuonPathSLFitter") << "MuonPathSLFitter: constructor";
 
   //shift theta
   int rawId;
   double shift;
   shift_theta_filename_ = pset.getParameter<edm::FileInPath>("shift_theta_filename");
   std::ifstream ifin4(shift_theta_filename_.fullPath());
   if (ifin4.fail()) {
     throw cms::Exception("Missing Input File")
         << "MuonPathSLFitter::MuonPathSLFitter() -  Cannot find " << shift_theta_filename_.fullPath();
   }
 
   while (ifin4.good()) {
     ifin4 >> rawId >> shift;
     shiftthetainfo_[rawId] = shift;
   }
 
   // LUTs
   sl1_filename_ = pset.getParameter<edm::FileInPath>("lut_sl1");
   sl2_filename_ = pset.getParameter<edm::FileInPath>("lut_sl2");
   sl3_filename_ = pset.getParameter<edm::FileInPath>("lut_sl3");
 
   fillLuts();
 
   setChi2Th(pset.getParameter<double>("chi2Th"));
   setTanPhiTh(pset.getParameter<double>("tanPhiTh"));
 }

◆ ~MuonPathSLFitter()

MuonPathSLFitter::~MuonPathSLFitter ( )

override

Definition at line 44 of file MuonPathSLFitter.cc.

References MuonPathFitter::debug_, and LogDebug.

                                     {
   if (debug_)
     LogDebug("MuonPathSLFitter") << "MuonPathSLFitter: destructor";
 }

Member Function Documentation

◆ analyze()

void MuonPathSLFitter::analyze	(	MuonPathPtr &	inMPath,
		lat_vector	lat_combs,
		std::vector< cmsdt::metaPrimitive > &	metaPrimitives
	)

private

Definition at line 96 of file MuonPathSLFitter.cc.

References funct::abs(), cmsdt::CELL_LENGTH, cmsdt::CELL_SEMIHEIGHT, cmsdt::CELL_SEMILENGTH, DTGeometry::chamber(), IntegrityClient_cfi::ChId, fit_common_in_t::coarse_bctr, fit_common_in_t::coarse_wirepos, cmsdt::COEFF_WIDTH_SL2_POSITION, cmsdt::COEFF_WIDTH_SL_POSITION, cmsdt::COEFF_WIDTH_SL_SLOPE, cmsdt::COEFF_WIDTH_SL_T0, fit_common_in_t::coeffs, MuonPathFitter::dtGeo_, MuonPathFitter::fit(), nano_mu_digi_cff::float, get_rom_addr(), MuonPathFitter::globalcoordsobtainer_, MuonPathFitter::hasPosRF(), fit_common_in_t::hits, fit_common_in_t::hits_valid, mps_fire::i, cmsdt::INCREASED_RES_POS, cmsdt::INCREASED_RES_POS_POW, cmsdt::INCREASED_RES_SLOPE_POW, createfilelist::int, fit_common_in_t::lateralities, DTGeometry::layer(), cmsdt::LHC_CLK_FREQ, lut_sl1, lut_sl2, lut_sl3, MuonPathFitter::max_drift_tdc, NUM_LAYERS, or, phi, PV3DBase< T, PVType, FrameType >::phi(), cmsdt::PHI_CONV, funct::pow(), cmsdt::PRECISSION_SL_POSITION, cmsdt::PRECISSION_SL_SLOPE, cmsdt::PRECISSION_SL_T0, cmsdt::PROD_RESIZE_SL2_POSITION, cmsdt::PROD_RESIZE_SL_POSITION, cmsdt::PROD_RESIZE_SL_SLOPE, cmsdt::PROD_RESIZE_SL_T0, quality, DetId::rawId(), MuonPathFitter::RomDataConvert(), MuonPathFitter::shiftinfo_, shiftthetainfo_, cmsdt::SL1_CELLS_OFFSET, slope, DTLayer::specificTopology(), mathSSE::sqrt(), DTGeometry::superLayer(), MuonPathFitter::tanPhiTh_, cmsdt::TIME_TO_TDC_COUNTS, GeomDet::toGlobal(), GeomDet::toLocal(), cmsdt::VERT_PHI1_PHI3, cmsdt::WIDTH_COARSED_TIME, cmsdt::WIDTH_FULL_TIME, cmsdt::WIREPOS_NORM_LSB_IGNORED, cmsdt::WIREPOS_WIDTH, DTTopology::wirePosition(), pfClustersFromHGC3DClusters_cfi::wp, x, PV3DBase< T, PVType, FrameType >::x(), cmsdt::XI_SL_WIDTH, y, z, and cmsdt::Z_SHIFT_MB4.

Referenced by run().

                                                                               {
   auto sl = inMPath->primitive(0)->superLayerId();  // 0, 1, 2
 
   int selected_lay = 1;
   if (inMPath->primitive(0)->tdcTimeStamp() != -1)
     selected_lay = 0;
 
   int dumLayId = inMPath->primitive(selected_lay)->cameraId();
   auto dtDumlayerId = DTLayerId(dumLayId);
   DTSuperLayerId MuonPathSLId(dtDumlayerId.wheel(), dtDumlayerId.station(), dtDumlayerId.sector(), sl + 1);
 
   DTChamberId ChId(MuonPathSLId.wheel(), MuonPathSLId.station(), MuonPathSLId.sector());
 
   DTSuperLayerId MuonPathSL1Id(dtDumlayerId.wheel(), dtDumlayerId.station(), dtDumlayerId.sector(), 1);
   DTSuperLayerId MuonPathSL2Id(dtDumlayerId.wheel(), dtDumlayerId.station(), dtDumlayerId.sector(), 2);
   DTSuperLayerId MuonPathSL3Id(dtDumlayerId.wheel(), dtDumlayerId.station(), dtDumlayerId.sector(), 3);
   DTWireId wireIdSL1(MuonPathSL1Id, 2, 1);
   DTWireId wireIdSL2(MuonPathSL2Id, 2, 1);
   DTWireId wireIdSL3(MuonPathSL3Id, 2, 1);
   auto sl_shift_cm = shiftinfo_[wireIdSL1.rawId()] - shiftinfo_[wireIdSL3.rawId()];
 
   fit_common_in_t fit_common_in;
 
   // 8-element vectors, for the 8 layers. As here we are fitting one SL only, we leave the other SL values as dummy ones
   fit_common_in.hits = {};
   fit_common_in.hits_valid = {};
 
   int quality = 3;
   if (inMPath->missingLayer() != -1)
     quality = 1;
 
   int minISL = 1;
   int maxISL = 3;
   if (sl < 1) {
     minISL = 0;
     maxISL = 2;
   }
 
   for (int isl = minISL; isl < maxISL; isl++) {
     for (int i = 0; i < NUM_LAYERS; i++) {
       if (isl == sl && inMPath->missingLayer() != i) {
         // Include both valid and non-valid hits. Non-valid values can be whatever, leaving all as -1 to make debugging easier.
         auto ti = inMPath->primitive(i)->tdcTimeStamp();
         if (ti != -1)
           ti = (int)round(((float)TIME_TO_TDC_COUNTS / (float)LHC_CLK_FREQ) * ti);
         auto wi = inMPath->primitive(i)->channelId();
         auto ly = inMPath->primitive(i)->layerId();
         // int layId = inMPath->primitive(i)->cameraId();
         // auto dtlayerId = DTLayerId(layId);
         // auto wireId = DTWireId(dtlayerId, wi + 1); // wire start from 1, mixer groups them starting from 0
         // int rawId = wireId.rawId();
         // wp in tdc counts (still in floating point)
         int wp_semicells = (wi - SL1_CELLS_OFFSET) * 2 + 1;
         if (ly % 2 == 1)
           wp_semicells -= 1;
         if (isl == 2)
           wp_semicells -= (int)round((sl_shift_cm * 10) / CELL_SEMILENGTH);
 
         float wp_tdc = wp_semicells * max_drift_tdc;
         int wp = (int)((long int)(round(wp_tdc * std::pow(2, WIREPOS_WIDTH))) / (int)std::pow(2, WIREPOS_WIDTH));
         fit_common_in.hits.push_back({ti, wi, ly, wp});
         // fill valids as well
         if (inMPath->missingLayer() == i)
           fit_common_in.hits_valid.push_back(0);
         else
           fit_common_in.hits_valid.push_back(1);
       } else {
         fit_common_in.hits.push_back({-1, -1, -1, -1});
         fit_common_in.hits_valid.push_back(0);
       }
     }
   }
 
   int smallest_time = 999999, tmp_coarse_wirepos_1 = -1, tmp_coarse_wirepos_3 = -1;
   // coarse_bctr is the 12 MSB of the smallest tdc
   for (int isl = 0; isl < 3; isl++) {
     if (isl != sl)
       continue;
     int myisl = isl < 2 ? 0 : 1;
     for (size_t i = 0; i < NUM_LAYERS; i++) {
       if (fit_common_in.hits_valid[NUM_LAYERS * myisl + i] == 0)
         continue;
       else if (fit_common_in.hits[NUM_LAYERS * myisl + i].ti < smallest_time)
         smallest_time = fit_common_in.hits[NUM_LAYERS * myisl + i].ti;
     }
     if (fit_common_in.hits_valid[NUM_LAYERS * myisl + 0] == 1)
       tmp_coarse_wirepos_1 = fit_common_in.hits[NUM_LAYERS * myisl + 0].wp;
     else
       tmp_coarse_wirepos_1 = fit_common_in.hits[NUM_LAYERS * myisl + 1].wp;
     if (fit_common_in.hits_valid[NUM_LAYERS * myisl + 3] == 1)
       tmp_coarse_wirepos_3 = fit_common_in.hits[NUM_LAYERS * myisl + 3].wp;
     else
       tmp_coarse_wirepos_3 = fit_common_in.hits[NUM_LAYERS * myisl + 2].wp;
 
     tmp_coarse_wirepos_1 = tmp_coarse_wirepos_1 >> WIREPOS_NORM_LSB_IGNORED;
     tmp_coarse_wirepos_3 = tmp_coarse_wirepos_3 >> WIREPOS_NORM_LSB_IGNORED;
   }
   fit_common_in.coarse_bctr = smallest_time >> (WIDTH_FULL_TIME - WIDTH_COARSED_TIME);
   fit_common_in.coarse_wirepos = (tmp_coarse_wirepos_1 + tmp_coarse_wirepos_3) >> 1;
 
   for (auto &lat_comb : lat_combs) {
     if (lat_comb[0] == 0 && lat_comb[1] == 0 && lat_comb[2] == 0 && lat_comb[3] == 0)
       continue;
     fit_common_in.lateralities.clear();
 
     auto rom_addr = get_rom_addr(inMPath, lat_comb);
     coeffs_t coeffs;
     if (sl == 0) {
       coeffs =
           RomDataConvert(lut_sl1[rom_addr], COEFF_WIDTH_SL_T0, COEFF_WIDTH_SL_POSITION, COEFF_WIDTH_SL_SLOPE, 0, 3);
     } else if (sl == 1) {
       coeffs =
           RomDataConvert(lut_sl2[rom_addr], COEFF_WIDTH_SL_T0, COEFF_WIDTH_SL2_POSITION, COEFF_WIDTH_SL_SLOPE, 0, 3);
     } else {
       coeffs =
           RomDataConvert(lut_sl3[rom_addr], COEFF_WIDTH_SL_T0, COEFF_WIDTH_SL_POSITION, COEFF_WIDTH_SL_SLOPE, 4, 7);
     }
     // Filling lateralities
     int minISL = 1;
     int maxISL = 3;
     if (sl < 1) {
       minISL = 0;
       maxISL = 2;
     }
 
     for (int isl = minISL; isl < maxISL; isl++) {
       for (size_t i = 0; i < NUM_LAYERS; i++) {
         if (isl == sl) {
           fit_common_in.lateralities.push_back(lat_comb[i]);
         } else
           fit_common_in.lateralities.push_back(-1);
       }
     }
     fit_common_in.coeffs = coeffs;
 
     auto fit_common_out = fit(fit_common_in,
                               XI_SL_WIDTH,
                               COEFF_WIDTH_SL_T0,
                               sl == 1 ? COEFF_WIDTH_SL2_POSITION : COEFF_WIDTH_SL_POSITION,
                               COEFF_WIDTH_SL_SLOPE,
                               PRECISSION_SL_T0,
                               PRECISSION_SL_POSITION,
                               PRECISSION_SL_SLOPE,
                               PROD_RESIZE_SL_T0,
                               sl == 1 ? PROD_RESIZE_SL2_POSITION : PROD_RESIZE_SL_POSITION,
                               PROD_RESIZE_SL_SLOPE,
                               max_drift_tdc,
                               sl + 1);
 
     if (fit_common_out.valid_fit == 1) {
       float t0_f = ((float)fit_common_out.t0) * (float)LHC_CLK_FREQ / (float)TIME_TO_TDC_COUNTS;
 
       float slope_f = -fit_common_out.slope * ((float)CELL_SEMILENGTH / max_drift_tdc) * (1) / (CELL_SEMIHEIGHT * 16.);
       if (sl != 1 && std::abs(slope_f) > tanPhiTh_)
         continue;
 
       DTWireId wireId(MuonPathSLId, 2, 1);
       float pos_ch_f = (float)(fit_common_out.position) * ((float)CELL_SEMILENGTH / (float)max_drift_tdc) / 10;
       pos_ch_f += (SL1_CELLS_OFFSET * CELL_LENGTH) / 10.;
       if (sl != 1)
         pos_ch_f += shiftinfo_[wireIdSL1.rawId()];
       else if (sl == 1)
         pos_ch_f += shiftthetainfo_[wireIdSL2.rawId()];
 
       float pos_sl_f = pos_ch_f - (sl - 1) * slope_f * VERT_PHI1_PHI3 / 2;
       float chi2_f = fit_common_out.chi2 * std::pow(((float)CELL_SEMILENGTH / (float)max_drift_tdc), 2) / 100;
 
       // obtention of global coordinates using luts
       int pos = (int)(10 * (pos_sl_f - shiftinfo_[wireId.rawId()]) * INCREASED_RES_POS_POW);
       int slope = (int)(-slope_f * INCREASED_RES_SLOPE_POW);
 
       auto global_coords = globalcoordsobtainer_->get_global_coordinates(ChId.rawId(), sl + 1, pos, slope);
       float phi = global_coords[0];
       float phiB = global_coords[1];
 
       // obtention of global coordinates using cmssw geometry
       double z = 0;
       if (ChId.station() == 3 or ChId.station() == 4) {
         z = Z_SHIFT_MB4;
       }
       GlobalPoint jm_x_cmssw_global = dtGeo_->chamber(ChId)->toGlobal(LocalPoint(pos_sl_f, 0., z));
       int thisec = ChId.sector();
       if (thisec == 13)
         thisec = 4;
       if (thisec == 14)
         thisec = 10;
       float phi_cmssw = jm_x_cmssw_global.phi() - PHI_CONV * (thisec - 1);
       float psi = atan(slope_f);
       float phiB_cmssw = hasPosRF(ChId.wheel(), ChId.sector()) ? psi - phi_cmssw : -psi - phi_cmssw;
       if (sl == 0)
         metaPrimitives.emplace_back(metaPrimitive({MuonPathSLId.rawId(),
                                                    t0_f,
                                                    (double)(fit_common_out.position),
                                                    (double)fit_common_out.slope,
                                                    phi,
                                                    phiB,
                                                    phi_cmssw,
                                                    phiB_cmssw,
                                                    chi2_f,
                                                    quality,
                                                    inMPath->primitive(0)->channelId(),
                                                    inMPath->primitive(0)->tdcTimeStamp(),
                                                    lat_comb[0],
                                                    inMPath->primitive(1)->channelId(),
                                                    inMPath->primitive(1)->tdcTimeStamp(),
                                                    lat_comb[1],
                                                    inMPath->primitive(2)->channelId(),
                                                    inMPath->primitive(2)->tdcTimeStamp(),
                                                    lat_comb[2],
                                                    inMPath->primitive(3)->channelId(),
                                                    inMPath->primitive(3)->tdcTimeStamp(),
                                                    lat_comb[3],
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1}));
       else if (sl == 2)
         metaPrimitives.emplace_back(metaPrimitive({MuonPathSLId.rawId(),
                                                    t0_f,
                                                    (double)(fit_common_out.position),
                                                    (double)fit_common_out.slope,
                                                    phi,
                                                    phiB,
                                                    phi_cmssw,
                                                    phiB_cmssw,
                                                    chi2_f,
                                                    quality,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    inMPath->primitive(0)->channelId(),
                                                    inMPath->primitive(0)->tdcTimeStamp(),
                                                    lat_comb[0],
                                                    inMPath->primitive(1)->channelId(),
                                                    inMPath->primitive(1)->tdcTimeStamp(),
                                                    lat_comb[1],
                                                    inMPath->primitive(2)->channelId(),
                                                    inMPath->primitive(2)->tdcTimeStamp(),
                                                    lat_comb[2],
                                                    inMPath->primitive(3)->channelId(),
                                                    inMPath->primitive(3)->tdcTimeStamp(),
                                                    lat_comb[3],
                                                    -1}));
       else if (sl == 1) {
         // fw-like calculation
         DTLayerId SL2_layer2Id(MuonPathSLId, 2);
         double z_shift = shiftthetainfo_[SL2_layer2Id.rawId()];
         double pos_cm =
             pos / 10 / INCREASED_RES_POS_POW;  // fixed to have z_shift and the position in the same units (MC)
         double jm_y = hasPosRF(MuonPathSLId.wheel(), MuonPathSLId.sector()) ? z_shift - pos_cm : z_shift + pos_cm;
 
         phi = jm_y;
 
         // Fixed sign of k (MC)
         double k_fromfw = hasPosRF(MuonPathSLId.wheel(), MuonPathSLId.sector()) ? slope_f : -slope_f;
         phiB = k_fromfw;
 
         // cmssw-like calculation
         LocalPoint wire1_in_layer(dtGeo_->layer(SL2_layer2Id)->specificTopology().wirePosition(1), 0, -0.65);
         GlobalPoint wire1_in_global = dtGeo_->layer(SL2_layer2Id)->toGlobal(wire1_in_layer);
         LocalPoint wire1_in_sl = dtGeo_->superLayer(MuonPathSLId)->toLocal(wire1_in_global);
         double x_shift = wire1_in_sl.x();
         jm_y = (dtGeo_->superLayer(MuonPathSLId)
                     ->toGlobal(LocalPoint(double(pos) / (10 * pow(2, INCREASED_RES_POS)) + x_shift, 0., 0)))
                    .z();
         phi_cmssw = jm_y;
 
         double x_cmssw = (dtGeo_->superLayer(MuonPathSLId)
                               ->toGlobal(LocalPoint(double(pos) / (10 * pow(2, INCREASED_RES_POS)) + x_shift, 0., 0)))
                              .x();
         double y_cmssw = (dtGeo_->superLayer(MuonPathSLId)
                               ->toGlobal(LocalPoint(double(pos) / (10 * pow(2, INCREASED_RES_POS)) + x_shift, 0., 0)))
                              .y();
         double r_cmssw = sqrt(x_cmssw * x_cmssw + y_cmssw * y_cmssw);
         double k_cmssw = jm_y / r_cmssw;
         phiB_cmssw = k_cmssw;
 
         metaPrimitives.emplace_back(metaPrimitive({MuonPathSLId.rawId(),
                                                    t0_f,
                                                    (double)(fit_common_out.position),
                                                    (double)fit_common_out.slope,
                                                    phi,
                                                    phiB,
                                                    phi_cmssw,
                                                    phiB_cmssw,
                                                    chi2_f,
                                                    quality,
                                                    inMPath->primitive(0)->channelId(),
                                                    inMPath->primitive(0)->tdcTimeStamp(),
                                                    lat_comb[0],
                                                    inMPath->primitive(1)->channelId(),
                                                    inMPath->primitive(1)->tdcTimeStamp(),
                                                    lat_comb[1],
                                                    inMPath->primitive(2)->channelId(),
                                                    inMPath->primitive(2)->tdcTimeStamp(),
                                                    lat_comb[2],
                                                    inMPath->primitive(3)->channelId(),
                                                    inMPath->primitive(3)->tdcTimeStamp(),
                                                    lat_comb[3],
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1,
                                                    -1}));
       }
     }  // (fit_common_out.valid_fit == 1)
   }    // loop in lat_combs
   return;
 }

◆ fillLuts()

void MuonPathSLFitter::fillLuts ( )

private

Definition at line 434 of file MuonPathSLFitter.cc.

References edm::FileInPath::fullPath(), mps_fire::i, mps_splice::line, lut_sl1, lut_sl2, lut_sl3, groupFilesInBlocks::reverse, sl1_filename_, sl2_filename_, sl3_filename_, and AlCaHLTBitMon_QueryRunRegistry::string.

Referenced by MuonPathSLFitter().

                                 {
   std::ifstream ifinsl1(sl1_filename_.fullPath());
   std::string line;
   while (ifinsl1.good()) {
     ifinsl1 >> line;
 
     std::vector<int> myNumbers;
     for (size_t i = 0; i < line.size(); i++) {
       // This converts the char into an int and pushes it into vec
       myNumbers.push_back(line[i] - '0');  // The digits will be in the same order as before
     }
     std::reverse(myNumbers.begin(), myNumbers.end());
     lut_sl1.push_back(myNumbers);
   }
 
   std::ifstream ifinsl2(sl2_filename_.fullPath());
   while (ifinsl2.good()) {
     ifinsl2 >> line;
 
     std::vector<int> myNumbers;
     for (size_t i = 0; i < line.size(); i++) {
       // This converts the char into an int and pushes it into vec
       myNumbers.push_back(line[i] - '0');  // The digits will be in the same order as before
     }
     std::reverse(myNumbers.begin(), myNumbers.end());
     lut_sl2.push_back(myNumbers);
   }
 
   std::ifstream ifinsl3(sl3_filename_.fullPath());
   while (ifinsl3.good()) {
     ifinsl3 >> line;
 
     std::vector<int> myNumbers;
     for (size_t i = 0; i < line.size(); i++) {
       // This converts the char into an int and pushes it into vec
       myNumbers.push_back(line[i] - '0');  // The digits will be in the same order as before
     }
     std::reverse(myNumbers.begin(), myNumbers.end());
     lut_sl3.push_back(myNumbers);
   }
 
   return;
 }

◆ finish()

void MuonPathSLFitter::finish ( )

overridevirtual

Reimplemented from MuonPathAnalyzer.

Definition at line 87 of file MuonPathSLFitter.cc.

References MuonPathFitter::debug_, and LogDebug.

Referenced by progressbar.ProgressBar::__next__().

                               {
   if (debug_)
     LogDebug("MuonPathSLFitter") << "MuonPathSLFitter: finish";
 };

◆ get_rom_addr()

int MuonPathSLFitter::get_rom_addr	(	MuonPathPtr &	inMPath,
		latcomb	lats
	)

private

Definition at line 478 of file MuonPathSLFitter.cc.

References groupFilesInBlocks::reverse, and vhdl_unsigned_to_int().

Referenced by analyze().

                                                                      {
   std::vector<int> rom_addr;
   auto missing_layer = inMPath->missingLayer();
   if (missing_layer == -1) {
     rom_addr.push_back(1);
     rom_addr.push_back(0);
   } else {
     if (missing_layer == 0) {
       rom_addr.push_back(0);
       rom_addr.push_back(0);
     } else if (missing_layer == 1) {
       rom_addr.push_back(0);
       rom_addr.push_back(1);
     } else if (missing_layer == 2) {
       rom_addr.push_back(1);
       rom_addr.push_back(0);
     } else {  // missing_layer == 3
       rom_addr.push_back(1);
       rom_addr.push_back(1);
     }
   }
   for (size_t ilat = 0; ilat < lats.size(); ilat++) {
     if ((int)ilat == missing_layer)  // only applies to 3-hit, as in 4-hit missL=-1
       continue;
     auto lat = lats[ilat];
     if (lat == -1)
       lat = 0;
     rom_addr.push_back(lat);
   }
   std::reverse(rom_addr.begin(), rom_addr.end());
   return vhdl_unsigned_to_int(rom_addr);
 }

◆ initialise()

void MuonPathSLFitter::initialise ( const edm::EventSetup & iEventSetup )

overridevirtual

Reimplemented from MuonPathAnalyzer.

Definition at line 52 of file MuonPathSLFitter.cc.

References MuonPathFitter::debug_, MuonPathFitter::dtGeo_, MuonPathFitter::dtGeomH, relativeConstraints::geom, edm::EventSetup::getHandle(), and LogDebug.

                                                                   {
   if (debug_)
     LogDebug("MuonPathSLFitter") << "MuonPathSLFitter::initialiase";
 
   auto geom = iEventSetup.getHandle(dtGeomH);
   dtGeo_ = &(*geom);
 }

◆ run() [1/4]

void MuonPathSLFitter::run	(	edm::Event &	iEvent,
		const edm::EventSetup &	iEventSetup,
		MuonPathPtrs &	inMpath,
		std::vector< cmsdt::metaPrimitive > &	metaPrimitives
	)

inlineoverridevirtual

Implements MuonPathAnalyzer.

Definition at line 24 of file MuonPathSLFitter.h.

27 {};

◆ run() [2/4]

void MuonPathSLFitter::run	(	edm::Event &	iEvent,
		const edm::EventSetup &	iEventSetup,
		MuonPathPtrs &	inMpath,
		std::vector< lat_vector > &	lateralities,
		std::vector< cmsdt::metaPrimitive > &	metaPrimitives
	)

overridevirtual

Implements MuonPathAnalyzer.

Definition at line 60 of file MuonPathSLFitter.cc.

References analyze(), MuonPathFitter::debug_, mps_fire::i, LogDebug, MuonPathFitter::max_drift_tdc, MuonPathFitter::maxdriftinfo_, nano_mu_digi_cff::rawId, DTChamberId::sector(), DTChamberId::station(), and DTChamberId::wheel().

                                                                      {
   if (debug_)
     LogDebug("MuonPathSLFitter") << "MuonPathSLFitter: run";
 
   // fit per SL (need to allow for multiple outputs for a single mpath)
   // for (auto &muonpath : muonpaths) {
   if (!muonpaths.empty()) {
     auto muonpath = muonpaths[0];
     int rawId = muonpath->primitive(0)->cameraId();
     if (muonpath->primitive(0)->cameraId() == -1) {
       rawId = muonpath->primitive(1)->cameraId();
     }
     const DTLayerId dtLId(rawId);
     max_drift_tdc = maxdriftinfo_[dtLId.wheel() + 2][dtLId.station() - 1][dtLId.sector() - 1];
   }
 
   for (size_t i = 0; i < muonpaths.size(); i++) {
     auto muonpath = muonpaths[i];
     auto lats = lateralities[i];
     analyze(muonpath, lats, metaPrimitives);
   }
 }

◆ run() [3/4]

void MuonPathSLFitter::run	(	edm::Event &	iEvent,
		const edm::EventSetup &	iEventSetup,
		std::vector< cmsdt::metaPrimitive > &	inMPaths,
		std::vector< cmsdt::metaPrimitive > &	outMPaths
	)

inlineoverridevirtual

Implements MuonPathAnalyzer.

Definition at line 33 of file MuonPathSLFitter.h.

36 {};

◆ run() [4/4]

void MuonPathSLFitter::run	(	edm::Event &	iEvent,
		const edm::EventSetup &	iEventSetup,
		MuonPathPtrs &	inMpath,
		MuonPathPtrs &	outMPath
	)

inlineoverridevirtual

Implements MuonPathAnalyzer.

Definition at line 37 of file MuonPathSLFitter.h.

40 {};

Member Data Documentation

◆ lut_sl1

std::vector<std::vector<int> > MuonPathSLFitter::lut_sl1

private

Definition at line 64 of file MuonPathSLFitter.h.

Referenced by analyze(), and fillLuts().

◆ lut_sl2

std::vector<std::vector<int> > MuonPathSLFitter::lut_sl2

private

Definition at line 65 of file MuonPathSLFitter.h.

Referenced by analyze(), and fillLuts().

◆ lut_sl3

std::vector<std::vector<int> > MuonPathSLFitter::lut_sl3

private

Definition at line 66 of file MuonPathSLFitter.h.

Referenced by analyze(), and fillLuts().

◆ shift_theta_filename_

edm::FileInPath MuonPathSLFitter::shift_theta_filename_

Definition at line 47 of file MuonPathSLFitter.h.

Referenced by MuonPathSLFitter().

◆ shiftthetainfo_

std::map<int, float> MuonPathSLFitter::shiftthetainfo_

Definition at line 48 of file MuonPathSLFitter.h.

Referenced by analyze(), and MuonPathSLFitter().

◆ sl1_filename_

edm::FileInPath MuonPathSLFitter::sl1_filename_

Definition at line 51 of file MuonPathSLFitter.h.

Referenced by fillLuts(), and MuonPathSLFitter().

◆ sl2_filename_

edm::FileInPath MuonPathSLFitter::sl2_filename_

Definition at line 52 of file MuonPathSLFitter.h.

Referenced by fillLuts(), and MuonPathSLFitter().

◆ sl3_filename_

edm::FileInPath MuonPathSLFitter::sl3_filename_

Definition at line 53 of file MuonPathSLFitter.h.

Referenced by fillLuts(), and MuonPathSLFitter().

Public Member Functions

Public Attributes

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ MuonPathSLFitter()

◆ ~MuonPathSLFitter()

Member Function Documentation

◆ analyze()

◆ fillLuts()

◆ finish()

◆ get_rom_addr()

◆ initialise()

◆ run() [1/4]

◆ run() [2/4]

◆ run() [3/4]

◆ run() [4/4]

Member Data Documentation

◆ lut_sl1

◆ lut_sl2

◆ lut_sl3

◆ shift_theta_filename_

◆ shiftthetainfo_

◆ sl1_filename_

◆ sl2_filename_

◆ sl3_filename_