#include <DiMuonMassBiasMonitor.h>

Inheritance diagram for DiMuonMassBiasMonitor:

Public Member Functions
void	analyze (const edm::Event &, const edm::EventSetup &) override

void	bookComponentHists (DQMStore::IBooker &, DecayHists &, TString const &, float distanceScaleFactor=1.) const

void	bookDecayComponentHistograms (DQMStore::IBooker &ibook, DecayHists &histos) const

void	bookDecayHists (DQMStore::IBooker &, DecayHists &, std::string const &, std::string const &, int, float, float, float distanceScaleFactor=1.) const

void	bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override

	DiMuonMassBiasMonitor (const edm::ParameterSet &)

void	fillComponentHistograms (ComponentHists const &histos, const reco::Track const &component, reco::BeamSpot const bs, reco::Vertex const *pv) const

reco::Vertex const *	fillDecayHistograms (DecayHists const &, std::vector< const reco::Track > const &tracks, const reco::VertexCollection const &pvs, const edm::EventSetup &) const

	~DiMuonMassBiasMonitor () override=default

Public Member Functions inherited from DQMEDAnalyzer
void	accumulate (edm::Event const &event, edm::EventSetup const &setup) final

void	beginLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final

void	beginRun (edm::Run const &run, edm::EventSetup const &setup) final

void	beginStream (edm::StreamID id) final

virtual void	dqmBeginRun (edm::Run const &, edm::EventSetup const &)

	DQMEDAnalyzer ()

void	endLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final

void	endRun (edm::Run const &run, edm::EventSetup const &setup) final

virtual bool	getCanSaveByLumi ()

Public Member Functions inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
	EDProducer ()=default

	EDProducer (const EDProducer &)=delete

bool	hasAbilityToProduceInBeginLumis () const final

bool	hasAbilityToProduceInBeginProcessBlocks () const final

bool	hasAbilityToProduceInBeginRuns () const final

bool	hasAbilityToProduceInEndLumis () const final

bool	hasAbilityToProduceInEndProcessBlocks () const final

bool	hasAbilityToProduceInEndRuns () const final

const EDProducer &	operator= (const EDProducer &)=delete

Static Public Member Functions
static void	fillDescriptions (edm::ConfigurationDescriptions &descriptions)

Static Public Member Functions inherited from DQMEDAnalyzer
static void	globalEndJob (DQMEDAnalyzerGlobalCache const *)

static void	globalEndLuminosityBlockProduce (edm::LuminosityBlock &lumi, edm::EventSetup const &setup, LuminosityBlockContext const *context)

static void	globalEndRunProduce (edm::Run &run, edm::EventSetup const &setup, RunContext const *context)

static std::unique_ptr< DQMEDAnalyzerGlobalCache >	initializeGlobalCache (edm::ParameterSet const &)

Private Attributes
const edm::EDGetTokenT< reco::BeamSpot >	beamSpotToken_

const std::string	decayMotherName_

edm::ParameterSet	DiMuMassConfiguration_

const double	distanceScaleFactor_

DecayHists	histosZmm

const std::string	MEFolderName_

const edm::EDGetTokenT< reco::TrackCollection >	tracksToken_

const edm::ESGetToken< TransientTrackBuilder, TransientTrackRecord >	ttbESToken_

const edm::EDGetTokenT< reco::VertexCollection >	vertexToken_

DiLepPlotHelp::PlotsVsKinematics	ZMassPlots = DiLepPlotHelp::PlotsVsKinematics(DiLepPlotHelp::MM)

Additional Inherited Members
Public Types inherited from DQMEDAnalyzer
typedef dqm::reco::DQMStore	DQMStore

typedef dqm::reco::MonitorElement	MonitorElement

Public Types inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
using	CacheTypes = CacheContexts< T... >

using	GlobalCache = typename CacheTypes::GlobalCache

using	HasAbility = AbilityChecker< T... >

using	InputProcessBlockCache = typename CacheTypes::InputProcessBlockCache

using	LuminosityBlockCache = typename CacheTypes::LuminosityBlockCache

using	LuminosityBlockContext = LuminosityBlockContextT< LuminosityBlockCache, RunCache, GlobalCache >

using	LuminosityBlockSummaryCache = typename CacheTypes::LuminosityBlockSummaryCache

using	RunCache = typename CacheTypes::RunCache

using	RunContext = RunContextT< RunCache, GlobalCache >

using	RunSummaryCache = typename CacheTypes::RunSummaryCache

Protected Member Functions inherited from DQMEDAnalyzer
uint64_t	meId () const

Protected Attributes inherited from DQMEDAnalyzer
edm::EDPutTokenT< DQMToken >	lumiToken_

edm::EDPutTokenT< DQMToken >	runToken_

unsigned int	streamId_

Detailed Description

DQM/TrackerMonitorTrack/src/DiMuonMassBiasMonitor.cc Monitoring DiMuon mass bias

Definition at line 69 of file DiMuonMassBiasMonitor.h.

Constructor & Destructor Documentation

◆ DiMuonMassBiasMonitor()

DiMuonMassBiasMonitor::DiMuonMassBiasMonitor ( const edm::ParameterSet & iConfig )

explicit

Definition at line 29 of file DiMuonMassBiasMonitor.cc.

     : ttbESToken_(esConsumes(edm::ESInputTag("", "TransientTrackBuilder"))),
       tracksToken_(consumes<reco::TrackCollection>(iConfig.getParameter<edm::InputTag>("muonTracks"))),
       vertexToken_(consumes<reco::VertexCollection>(iConfig.getParameter<edm::InputTag>("vertices"))),
       beamSpotToken_(consumes<reco::BeamSpot>(iConfig.getParameter<edm::InputTag>("beamSpot"))),
       MEFolderName_(iConfig.getParameter<std::string>("FolderName")),
       decayMotherName_(iConfig.getParameter<std::string>("decayMotherName")),
       distanceScaleFactor_(iConfig.getParameter<double>("distanceScaleFactor")),
       DiMuMassConfiguration_(iConfig.getParameter<edm::ParameterSet>("DiMuMassConfig")) {}

◆ ~DiMuonMassBiasMonitor()

DiMuonMassBiasMonitor::~DiMuonMassBiasMonitor ( )

overridedefault

Member Function Documentation

◆ analyze()

void DiMuonMassBiasMonitor::analyze	(	const edm::Event &	iEvent,
		const edm::EventSetup &	iSetup
	)

overridevirtual

Reimplemented from DQMEDAnalyzer.

Definition at line 57 of file DiMuonMassBiasMonitor.cc.

References beamSpotToken_, cms::cuda::bs, DecayHists::decayComponents, fillComponentHistograms(), fillDecayHistograms(), DiLepPlotHelp::PlotsVsKinematics::fillPlots(), histosZmm, iEvent, mumass2, mathSSE::sqrt(), FrontierCondition_GT_autoExpress_cfi::t0, RandomServiceHelper::t1, tracksToken_, vertexToken_, AlignmentTracksFromVertexSelector_cfi::vertices, and ZMassPlots.

                                                                                        {
   std::vector<const reco::Track*> myTracks;
   const auto trackHandle = iEvent.getHandle(tracksToken_);
   if (!trackHandle.isValid()) {
     edm::LogError("DiMuonMassBiasMonitor") << "invalid track collection encountered!";
     return;
   }
 
   for (const auto& muonTrk : *trackHandle) {
     myTracks.emplace_back(&muonTrk);
   }
 
   if (myTracks.size() != 2) {
     edm::LogWarning("DiMuonMassBiasMonitor") << "There are not enough tracks to monitor!";
     return;
   }
 
   const auto& t1 = myTracks[1]->momentum();
   const auto& t0 = myTracks[0]->momentum();
   const auto& ditrack = t1 + t0;
 
   const auto& tplus = myTracks[0]->charge() > 0 ? myTracks[0] : myTracks[1];
   const auto& tminus = myTracks[0]->charge() < 0 ? myTracks[0] : myTracks[1];
 
   TLorentzVector p4_tplus(tplus->px(), tplus->py(), tplus->pz(), sqrt((tplus->p() * tplus->p()) + mumass2));
   TLorentzVector p4_tminus(tminus->px(), tminus->py(), tminus->pz(), sqrt((tminus->p() * tminus->p()) + mumass2));
 
   const auto& Zp4 = p4_tplus + p4_tminus;
   float track_invMass = Zp4.M();
 
   // creat the pair of TLorentVectors used to make the plos
   std::pair<TLorentzVector, TLorentzVector> tktk_p4 = std::make_pair(p4_tplus, p4_tminus);
 
   // fill the z->mm mass plots
   ZMassPlots.fillPlots(track_invMass, tktk_p4);
 
   math::XYZPoint ZpT(ditrack.x(), ditrack.y(), 0);
   math::XYZPoint Zp(ditrack.x(), ditrack.y(), ditrack.z());
 
   // get collection of reconstructed vertices from event
   const auto& vertexHandle = iEvent.getHandle(vertexToken_);
   if (!vertexHandle.isValid()) {
     edm::LogError("DiMuonMassBiasMonitor") << "invalid vertex collection encountered!";
     return;
   }
 
   // get the vertices from the event
   const auto& vertices = vertexHandle.product();
 
   // fill the decay vertex plots
   auto decayVertex = fillDecayHistograms(histosZmm, myTracks, vertices, iSetup);
 
   // get the beamspot from the event
   const reco::BeamSpot* bs;
   const auto& beamSpotHandle = iEvent.getHandle(beamSpotToken_);
   if (!beamSpotHandle.isValid()) {
     bs = nullptr;
   } else {
     bs = beamSpotHandle.product();
   }
 
   // fill the components plots
   fillComponentHistograms(histosZmm.decayComponents[0], tplus, bs, decayVertex);
   fillComponentHistograms(histosZmm.decayComponents[1], tminus, bs, decayVertex);
 }

◆ bookComponentHists()

void DiMuonMassBiasMonitor::bookComponentHists	(	DQMStore::IBooker &	ibook,
		DecayHists &	histos,
		TString const &	componentName,
		float	distanceScaleFactor = `1.`
	)		const

Definition at line 128 of file DiMuonMassBiasMonitor.cc.

References dqm::implementation::IBooker::book1D(), AlCaHLTBitMon_QueryRunRegistry::comp, DiMuonMassBiasMonitor_cfi::distanceScaleFactor, combine::histos, and M_PI.

Referenced by bookDecayComponentHistograms().

                                                                                 {
   ComponentHists comp;
 
   comp.h_pt = ibook.book1D(componentName + "_pt", "track momentum ;p_{T} [GeV]", 100, 0., 100.);
   comp.h_eta = ibook.book1D(componentName + "_eta", "track rapidity;#eta", 100, -2.5, 2.5);
   comp.h_phi = ibook.book1D(componentName + "_phi", "track azimuth;#phi", 100, -M_PI, M_PI);
   comp.h_dxy = ibook.book1D(componentName + "_dxyBS",
                             "TIP w.r.t BS;d_{xy}(BS) [cm]",
                             100,
                             -0.5 * distanceScaleFactor,
                             0.5 * distanceScaleFactor);
   comp.h_exy =
       ibook.book1D(componentName + "_exy", "Error on TIP ;#sigma(d_{xy}(BS)) [cm]", 100, 0, 0.05 * distanceScaleFactor);
   comp.h_dz = ibook.book1D(componentName + "_dzPV",
                            "LIP w.r.t PV;d_{z}(PV) [cm]",
                            100,
                            -0.5 * distanceScaleFactor,
                            0.5 * distanceScaleFactor);
   comp.h_ez =
       ibook.book1D(componentName + "_ez", "Error on LIP;#sigma(d_{z}(PV)) [cm]", 100, 0, 0.5 * distanceScaleFactor);
   comp.h_chi2 = ibook.book1D(componentName + "_chi2", ";#chi^{2}", 100, 0, 20);
 
   histos.decayComponents.push_back(comp);
 }

◆ bookDecayComponentHistograms()

void DiMuonMassBiasMonitor::bookDecayComponentHistograms	(	DQMStore::IBooker &	ibook,
		DecayHists &	histos
	)		const

Definition at line 123 of file DiMuonMassBiasMonitor.cc.

References bookComponentHists(), and combine::histos.

Referenced by bookHistograms().

                                                                                                          {
   bookComponentHists(ibook, histos, "mu_plus", 0.1);
   bookComponentHists(ibook, histos, "mu_minus", 0.1);
 }

◆ bookDecayHists()

void DiMuonMassBiasMonitor::bookDecayHists	(	DQMStore::IBooker &	ibook,
		DecayHists &	decayHists,
		std::string const &	name,
		std::string const &	products,
		int	nMassBins,
		float	massMin,
		float	massMax,
		float	distanceScaleFactor = `1.`
	)		const

Definition at line 156 of file DiMuonMassBiasMonitor.cc.

References dqm::implementation::IBooker::book1D(), DiMuonMassBiasMonitor_cfi::distanceScaleFactor, DecayHists::h_ct, DecayHists::h_displ2D, DecayHists::h_eta, DecayHists::h_mass, DecayHists::h_phi, DecayHists::h_pointing, DecayHists::h_pt, DecayHists::h_sign2D, DecayHists::h_vertNormChi2, DecayHists::h_vertProb, B2GTnPMonitor_cfi::histTitle, M_PI, vertexSelectForHeavyFlavorDQM_cfi::massMax, vertexSelectForHeavyFlavorDQM_cfi::massMin, Skims_PA_cff::name, edm::es::products(), and AlCaHLTBitMon_QueryRunRegistry::string.

Referenced by bookHistograms().

                                                                             {
   std::string histTitle = name + " #rightarrow " + products + ";";
 
   decayHists.h_mass = ibook.book1D("h_mass", histTitle + "M(" + products + ") [GeV]", nMassBins, massMin, massMax);
   decayHists.h_pt = ibook.book1D("h_pt", histTitle + "p_{T} [GeV]", 100, 0.00, 200.0);
   decayHists.h_eta = ibook.book1D("h_eta", histTitle + "#eta", 100, -5., 5.);
   decayHists.h_phi = ibook.book1D("h_phi", histTitle + "#varphi [rad]", 100, -M_PI, M_PI);
   decayHists.h_displ2D =
       ibook.book1D("h_displ2D", histTitle + "vertex 2D displacement [cm]", 100, 0.00, 0.1 * distanceScaleFactor);
   decayHists.h_sign2D =
       ibook.book1D("h_sign2D", histTitle + "vertex 2D displ. significance", 100, 0.00, 100.0 * distanceScaleFactor);
   decayHists.h_ct = ibook.book1D("h_ct", histTitle + "c#tau [cm]", 100, 0.00, 0.4 * distanceScaleFactor);
   decayHists.h_pointing = ibook.book1D("h_pointing", histTitle + "cos( 2D pointing angle )", 100, -1, 1);
   decayHists.h_vertNormChi2 = ibook.book1D("h_vertNormChi2", histTitle + "vertex #chi^{2}/ndof", 100, 0.00, 10);
   decayHists.h_vertProb = ibook.book1D("h_vertProb", histTitle + "vertex prob.", 100, 0.00, 1.0);
 }

◆ bookHistograms()

void DiMuonMassBiasMonitor::bookHistograms	(	DQMStore::IBooker &	iBooker,
		edm::Run const &	,
		edm::EventSetup const &
	)

overridevirtual

Implements DQMEDAnalyzer.

Definition at line 39 of file DiMuonMassBiasMonitor.cc.

References bookDecayComponentHistograms(), bookDecayHists(), DiLepPlotHelp::PlotsVsKinematics::bookFromPSet(), decayMotherName_, DiMuMassConfiguration_, distanceScaleFactor_, edm::ParameterSet::getParameter(), histosZmm, MEFolderName_, dqm::implementation::NavigatorBase::setCurrentFolder(), and ZMassPlots.

                                                                                                         {
   iBooker.setCurrentFolder(MEFolderName_ + "/DiMuonMassBiasMonitor/MassBias");
   ZMassPlots.bookFromPSet(iBooker, DiMuMassConfiguration_);
 
   iBooker.setCurrentFolder(MEFolderName_ + "/DiMuonMassBiasMonitor");
 
   // retrieve the mass bins
   const auto& mass_bins = DiMuMassConfiguration_.getParameter<int32_t>("NyBins");
   const auto& mass_min = DiMuMassConfiguration_.getParameter<double>("ymin");
   const auto& mass_max = DiMuMassConfiguration_.getParameter<double>("ymax");
 
   bookDecayHists(
       iBooker, histosZmm, decayMotherName_, "#mu^{+}#mu^{-}", mass_bins, mass_min, mass_max, distanceScaleFactor_);
 
   iBooker.setCurrentFolder(MEFolderName_ + "/DiMuonMassBiasMonitor/components");
   bookDecayComponentHistograms(iBooker, histosZmm);
 }

◆ fillComponentHistograms()

void DiMuonMassBiasMonitor::fillComponentHistograms	(	ComponentHists const &	histos,
		const reco::Track *const &	component,
		reco::BeamSpot const *	bs,
		reco::Vertex const *	pv
	)		const

Definition at line 256 of file DiMuonMassBiasMonitor.cc.

References cms::cuda::bs, reco::TrackBase::chi2(), reco::TrackBase::dxy(), reco::TrackBase::dxyError(), reco::TrackBase::dz(), reco::TrackBase::dzError(), reco::TrackBase::eta(), combine::histos, reco::TrackBase::ndof(), reco::TrackBase::phi(), reco::TrackBase::pt(), and SiPixelPI::zero.

Referenced by analyze().

                                                                                 {
   histos.h_pt->Fill(component->pt());
   histos.h_eta->Fill(component->eta());
   histos.h_phi->Fill(component->phi());
 
   math::XYZPoint zero(0, 0, 0);
   math::Error<3>::type zeroCov;  // needed for dxyError
   if (bs) {
     histos.h_dxy->Fill(component->dxy(*bs));
     histos.h_exy->Fill(component->dxyError(*bs));
   } else {
     histos.h_dxy->Fill(component->dxy(zero));
     histos.h_exy->Fill(component->dxyError(zero, zeroCov));
   }
   if (pv) {
     histos.h_dz->Fill(component->dz(pv->position()));
   } else {
     histos.h_dz->Fill(component->dz(zero));
   }
   histos.h_ez->Fill(component->dzError());
 
   histos.h_chi2->Fill(component->chi2() / component->ndof());
 }

◆ fillDecayHistograms()

reco::Vertex const * DiMuonMassBiasMonitor::fillDecayHistograms	(	DecayHists const &	histos,
		std::vector< const reco::Track *> const &	tracks,
		const reco::VertexCollection *const &	pvs,
		const edm::EventSetup &	iSetup
	)		const

Definition at line 180 of file DiMuonMassBiasMonitor.cc.

References funct::abs(), TransientTrackBuilder::build(), ChiSquaredProbability(), VertexDistanceXY::distance(), edm::EventSetup::getData(), combine::histos, EgHLTOffHistBins_cfi::mass, mumass2, FSQDQM_cfi::pvs, Measurement1D::significance(), mathSSE::sqrt(), HLT_2024v10_cff::track, DiMuonV_cfg::tracks, ttbESToken_, Measurement1D::value(), HltBtagValidation_cff::Vertex, KalmanVertexFitter::vertex(), and reco::Vertex::z().

Referenced by analyze().

                                                                                                   {
   if (tracks.size() != 2) {
     edm::LogWarning("DiMuonVertexMonitor") << "There are not enough tracks to construct a vertex!";
     return nullptr;
   }
 
   const TransientTrackBuilder* theB = &iSetup.getData(ttbESToken_);
   TransientVertex mumuTransientVtx;
   std::vector<reco::TransientTrack> tks;
 
   for (const auto& track : tracks) {
     reco::TransientTrack trajectory = theB->build(track);
     tks.push_back(trajectory);
   }
 
   KalmanVertexFitter kalman(true);
   mumuTransientVtx = kalman.vertex(tks);
 
   auto svtx = reco::Vertex(mumuTransientVtx);
   if (not svtx.isValid()) {
     return nullptr;
   }
 
   const auto& mom_t1 = tracks[1]->momentum();
   const auto& mom_t0 = tracks[0]->momentum();
   const auto& momentum = mom_t1 + mom_t0;
 
   TLorentzVector p4_t0(mom_t0.x(), mom_t0.y(), mom_t0.z(), sqrt(mom_t0.mag2() + mumass2));
   TLorentzVector p4_t1(mom_t1.x(), mom_t1.y(), mom_t1.z(), sqrt(mom_t1.mag2() + mumass2));
 
   const auto& p4 = p4_t0 + p4_t1;
   float mass = p4.M();
 
   auto pvtx = std::min_element(pvs->begin(), pvs->end(), [svtx](reco::Vertex const& pv1, reco::Vertex const& pv2) {
     return abs(pv1.z() - svtx.z()) < abs(pv2.z() - svtx.z());
   });
 
   if (pvtx == pvs->end()) {
     return nullptr;
   }
 
   VertexDistanceXY vdistXY;
   Measurement1D distXY = vdistXY.distance(svtx, *pvtx);
 
   auto pvtPos = pvtx->position();
   const auto& svtPos = svtx.position();
 
   math::XYZVector displVect2D(svtPos.x() - pvtPos.x(), svtPos.y() - pvtPos.y(), 0);
   auto cosAlpha = displVect2D.Dot(momentum) / (displVect2D.Rho() * momentum.rho());
 
   auto ct = distXY.value() * cosAlpha * mass / momentum.rho();
 
   histos.h_pointing->Fill(cosAlpha);
 
   histos.h_mass->Fill(mass);
 
   histos.h_pt->Fill(momentum.rho());
   histos.h_eta->Fill(momentum.eta());
   histos.h_phi->Fill(momentum.phi());
 
   histos.h_ct->Fill(ct);
 
   histos.h_displ2D->Fill(distXY.value());
   histos.h_sign2D->Fill(distXY.significance());
 
   if (svtx.chi2() >= 0) {
     histos.h_vertNormChi2->Fill(svtx.chi2() / svtx.ndof());
     histos.h_vertProb->Fill(ChiSquaredProbability(svtx.chi2(), svtx.ndof()));
   }
 
   return &*pvtx;
 }

◆ fillDescriptions()

void DiMuonMassBiasMonitor::fillDescriptions ( edm::ConfigurationDescriptions & descriptions )

static

Definition at line 283 of file DiMuonMassBiasMonitor.cc.

References edm::ParameterSetDescription::add(), edm::ConfigurationDescriptions::addWithDefaultLabel(), submitPVResolutionJobs::desc, ProducerED_cfi::InputTag, and AlCaHLTBitMon_QueryRunRegistry::string.

                                                                                        {
   edm::ParameterSetDescription desc;
   desc.add<edm::InputTag>("muonTracks", edm::InputTag("ALCARECOTkAlDiMuon"));
   desc.add<edm::InputTag>("vertices", edm::InputTag("offlinePrimaryVertices"));
   desc.add<edm::InputTag>("beamSpot", edm::InputTag("offlineBeamSpot"));
   desc.add<std::string>("FolderName", "DiMuonMassBiasMonitor");
   desc.add<std::string>("decayMotherName", "Z");
   desc.add<double>("distanceScaleFactor", 0.1);
 
   {
     edm::ParameterSetDescription psDiMuMass;
     psDiMuMass.add<std::string>("name", "DiMuMass");
     psDiMuMass.add<std::string>("title", "M(#mu#mu)");
     psDiMuMass.add<std::string>("yUnits", "[GeV]");
     psDiMuMass.add<int>("NxBins", 24);
     psDiMuMass.add<int>("NyBins", 50);
     psDiMuMass.add<double>("ymin", 65.);
     psDiMuMass.add<double>("ymax", 115.);
     psDiMuMass.add<double>("maxDeltaEta", 3.7);
     desc.add<edm::ParameterSetDescription>("DiMuMassConfig", psDiMuMass);
   }
 
   descriptions.addWithDefaultLabel(desc);
 }

Member Data Documentation

◆ beamSpotToken_

const edm::EDGetTokenT<reco::BeamSpot> DiMuonMassBiasMonitor::beamSpotToken_

private

Definition at line 111 of file DiMuonMassBiasMonitor.h.

Referenced by analyze().

◆ decayMotherName_

const std::string DiMuonMassBiasMonitor::decayMotherName_

private

Definition at line 114 of file DiMuonMassBiasMonitor.h.

Referenced by bookHistograms().

◆ DiMuMassConfiguration_

edm::ParameterSet DiMuonMassBiasMonitor::DiMuMassConfiguration_

private

Definition at line 116 of file DiMuonMassBiasMonitor.h.

Referenced by bookHistograms().

◆ distanceScaleFactor_

const double DiMuonMassBiasMonitor::distanceScaleFactor_

private

Definition at line 115 of file DiMuonMassBiasMonitor.h.

Referenced by bookHistograms().

◆ histosZmm

DecayHists DiMuonMassBiasMonitor::histosZmm

private

Definition at line 121 of file DiMuonMassBiasMonitor.h.

Referenced by analyze(), and bookHistograms().

◆ MEFolderName_

const std::string DiMuonMassBiasMonitor::MEFolderName_

private

Definition at line 113 of file DiMuonMassBiasMonitor.h.

Referenced by bookHistograms().

◆ tracksToken_

const edm::EDGetTokenT<reco::TrackCollection> DiMuonMassBiasMonitor::tracksToken_

private

Definition at line 109 of file DiMuonMassBiasMonitor.h.

Referenced by analyze().

◆ ttbESToken_

const edm::ESGetToken<TransientTrackBuilder, TransientTrackRecord> DiMuonMassBiasMonitor::ttbESToken_

private

Definition at line 108 of file DiMuonMassBiasMonitor.h.

Referenced by fillDecayHistograms().

◆ vertexToken_

const edm::EDGetTokenT<reco::VertexCollection> DiMuonMassBiasMonitor::vertexToken_

private

Definition at line 110 of file DiMuonMassBiasMonitor.h.

Referenced by analyze().

◆ ZMassPlots

DiLepPlotHelp::PlotsVsKinematics DiMuonMassBiasMonitor::ZMassPlots = DiLepPlotHelp::PlotsVsKinematics(DiLepPlotHelp::MM)

private

Definition at line 119 of file DiMuonMassBiasMonitor.h.

Referenced by analyze(), and bookHistograms().

Public Member Functions

Static Public Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ DiMuonMassBiasMonitor()

◆ ~DiMuonMassBiasMonitor()

Member Function Documentation

◆ analyze()

◆ bookComponentHists()

◆ bookDecayComponentHistograms()

◆ bookDecayHists()

◆ bookHistograms()

◆ fillComponentHistograms()

◆ fillDecayHistograms()

◆ fillDescriptions()

Member Data Documentation

◆ beamSpotToken_

◆ decayMotherName_

◆ DiMuMassConfiguration_

◆ distanceScaleFactor_

◆ histosZmm

◆ MEFolderName_

◆ tracksToken_

◆ ttbESToken_

◆ vertexToken_

◆ ZMassPlots