#include <CalibTracker/SiStripLorentzAngle/plugins/SiStripLorentzAnglePCLHarvester.cc>

Inheritance diagram for SiStripLorentzAnglePCLHarvester:

Classes
struct	LATkMap

Public Member Functions
void	beginRun (const edm::Run &, const edm::EventSetup &) override

	SiStripLorentzAnglePCLHarvester (const edm::ParameterSet &)

	~SiStripLorentzAnglePCLHarvester () override=default

Public Member Functions inherited from DQMEDHarvester
void	accumulate (edm::Event const &ev, edm::EventSetup const &es) final

void	beginJob () override

void	beginLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &) final

void	beginRun (edm::Run const &run, edm::EventSetup const &) override

virtual void	dqmAnalyze (DQMStore::IBooker &, DQMStore::IGetter &, edm::Event const &, edm::EventSetup const &)

	DQMEDHarvester (edm::ParameterSet const &iConfig)

	DQMEDHarvester ()

virtual void	dqmEndLuminosityBlock (DQMStore::IBooker &, DQMStore::IGetter &, edm::LuminosityBlock const &, edm::EventSetup const &)

virtual void	dqmEndRun (DQMStore::IBooker &, DQMStore::IGetter &, edm::Run const &, edm::EventSetup const &)

void	endLuminosityBlock (edm::LuminosityBlock const &, edm::EventSetup const &) final

void	endLuminosityBlockProduce (edm::LuminosityBlock &lumi, edm::EventSetup const &es) final

void	endProcessBlockProduce (edm::ProcessBlock &) final

void	endRun (edm::Run const &, edm::EventSetup const &) override

void	endRunProduce (edm::Run &run, edm::EventSetup const &es) final

	~DQMEDHarvester () override=default

Public Member Functions inherited from edm::one::EDProducer< edm::EndLuminosityBlockProducer, edm::EndRunProducer, edm::EndProcessBlockProducer, edm::one::WatchLuminosityBlocks, edm::one::WatchRuns, edm::one::SharedResources, edm::Accumulator >
	EDProducer ()=default

	EDProducer (const EDProducer &)=delete

SerialTaskQueue *	globalLuminosityBlocksQueue () final

SerialTaskQueue *	globalRunsQueue () final

bool	hasAbilityToProduceInBeginLumis () const final

bool	hasAbilityToProduceInBeginProcessBlocks () const final

bool	hasAbilityToProduceInBeginRuns () const final

bool	hasAbilityToProduceInEndLumis () const final

bool	hasAbilityToProduceInEndProcessBlocks () const final

bool	hasAbilityToProduceInEndRuns () const final

const EDProducer &	operator= (const EDProducer &)=delete

bool	wantsGlobalLuminosityBlocks () const final

bool	wantsGlobalRuns () const final

bool	wantsInputProcessBlocks () const final

bool	wantsProcessBlocks () const final

Public Member Functions inherited from edm::one::EDProducerBase
	EDProducerBase ()

ModuleDescription const &	moduleDescription () const

bool	wantsStreamLuminosityBlocks () const

bool	wantsStreamRuns () const

	~EDProducerBase () override

Public Member Functions inherited from edm::ProducerBase
void	callWhenNewProductsRegistered (std::function< void(BranchDescription const &)> const &func)

std::vector< edm::ProductResolverIndex > const &	indiciesForPutProducts (BranchType iBranchType) const

	ProducerBase ()

std::vector< edm::ProductResolverIndex > const &	putTokenIndexToProductResolverIndex () const

std::vector< bool > const &	recordProvenanceList () const

void	registerProducts (ProducerBase , ProductRegistry , ModuleDescription const &)

std::function< void(BranchDescription const &)>	registrationCallback () const
	used by the fwk to register list of products More...

void	resolvePutIndicies (BranchType iBranchType, ModuleToResolverIndicies const &iIndicies, std::string const &moduleLabel)

TypeLabelList const &	typeLabelList () const
	used by the fwk to register the list of products of this module More...

	~ProducerBase () noexcept(false) override

Public Member Functions inherited from edm::EDConsumerBase
std::vector< ConsumesInfo >	consumesInfo () const

void	convertCurrentProcessAlias (std::string const &processName)
	Convert "@currentProcess" in InputTag process names to the actual current process name. More...

	EDConsumerBase ()

	EDConsumerBase (EDConsumerBase const &)=delete

	EDConsumerBase (EDConsumerBase &&)=default

ESResolverIndex const *	esGetTokenIndices (edm::Transition iTrans) const

std::vector< ESResolverIndex > const &	esGetTokenIndicesVector (edm::Transition iTrans) const

std::vector< ESRecordIndex > const &	esGetTokenRecordIndicesVector (edm::Transition iTrans) const

ProductResolverIndexAndSkipBit	indexFrom (EDGetToken, BranchType, TypeID const &) const

void	itemsMayGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const

void	itemsToGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const

std::vector< ProductResolverIndexAndSkipBit > const &	itemsToGetFrom (BranchType iType) const

void	labelsForToken (EDGetToken iToken, Labels &oLabels) const

void	modulesWhoseProductsAreConsumed (std::array< std::vector< ModuleDescription const > , NumBranchTypes > &modulesAll, std::vector< ModuleProcessName > &modulesInPreviousProcesses, ProductRegistry const &preg, std::map< std::string, ModuleDescription const *> const &labelsToDesc, std::string const &processName) const

EDConsumerBase const &	operator= (EDConsumerBase const &)=delete

EDConsumerBase &	operator= (EDConsumerBase &&)=default

bool	registeredToConsume (ProductResolverIndex, bool, BranchType) const

void	selectInputProcessBlocks (ProductRegistry const &productRegistry, ProcessBlockHelperBase const &processBlockHelperBase)

ProductResolverIndexAndSkipBit	uncheckedIndexFrom (EDGetToken) const

void	updateLookup (BranchType iBranchType, ProductResolverIndexHelper const &, bool iPrefetchMayGet)

void	updateLookup (eventsetup::ESRecordsToProductResolverIndices const &)

virtual	~EDConsumerBase () noexcept(false)

Static Public Member Functions
static void	fillDescriptions (edm::ConfigurationDescriptions &)

Static Public Member Functions inherited from edm::one::EDProducerBase
static const std::string &	baseType ()

static void	fillDescriptions (ConfigurationDescriptions &descriptions)

static void	prevalidate (ConfigurationDescriptions &descriptions)

Private Member Functions
void	dqmEndJob (DQMStore::IBooker &, DQMStore::IGetter &) override

void	endRun (const edm::Run &, const edm::EventSetup &) override

std::string	getStem (const std::string &histoName, bool isFolder)

Private Attributes
const SiStripLorentzAngle *	currentLorentzAngle_

const bool	debug_

const std::string	dqmDir_

const std::vector< double >	fitRange_

const edm::ESGetToken< TrackerGeometry, TrackerDigiGeometryRecord >	geomEsToken_

LATkMap	h_modulesLA

SiStripLorentzAngleCalibrationHistograms	iHists_

const edm::ESGetToken< SiStripLatency, SiStripLatencyRcd >	latencyToken_

const edm::ESGetToken< MagneticField, IdealMagneticFieldRecord >	magneticFieldToken_

bool	mismatchedBField_

bool	mismatchedLatency_

const std::string	recordName_

const edm::ESGetToken< SiStripLorentzAngle, SiStripLorentzAngleDepRcd >	siStripLAEsToken_

std::pair< double, double >	theFitRange_ {0., 0.}

float	theMagField_ {0.f}

std::unique_ptr< TrackerTopology >	theTrackerTopology_

std::unique_ptr< TkDetMap >	tkDetMap_

const edm::ESGetToken< TkDetMap, TrackerTopologyRcd >	tkDetMapTokenER_

const edm::ESGetToken< TrackerTopology, TrackerTopologyRcd >	topoEsTokenBR_

const edm::ESGetToken< TrackerTopology, TrackerTopologyRcd >	topoEsTokenER_

Static Private Attributes
static constexpr float	teslaToInverseGeV_ = 2.99792458e-3f

Additional Inherited Members
Public Types inherited from DQMEDHarvester
typedef dqm::harvesting::DQMStore	DQMStore

typedef dqm::harvesting::MonitorElement	MonitorElement

Public Types inherited from edm::one::EDProducerBase
typedef EDProducerBase	ModuleType

Public Types inherited from edm::ProducerBase
template<typename T >
using	BranchAliasSetterT = ProductRegistryHelper::BranchAliasSetterT< T >

using	ModuleToResolverIndicies = std::unordered_multimap< std::string, std::tuple< edm::TypeID const , const char , edm::ProductResolverIndex > >

typedef ProductRegistryHelper::TypeLabelList	TypeLabelList

Public Types inherited from edm::EDConsumerBase
typedef ProductLabels	Labels

Protected Member Functions inherited from edm::ProducerBase
template<Transition Tr = Transition::Event>
auto	produces (std::string instanceName) noexcept
	declare what type of product will make and with which optional label More...

template<Transition B>
BranchAliasSetter	produces (const TypeID &id, std::string instanceName=std::string(), bool recordProvenance=true)

template<BranchType B>
BranchAliasSetter	produces (const TypeID &id, std::string instanceName=std::string(), bool recordProvenance=true)

BranchAliasSetter	produces (const TypeID &id, std::string instanceName=std::string(), bool recordProvenance=true)

template<typename ProductType , Transition B>
BranchAliasSetterT< ProductType >	produces (std::string instanceName)

template<class ProductType >
BranchAliasSetterT< ProductType >	produces ()

template<typename ProductType , BranchType B>
BranchAliasSetterT< ProductType >	produces (std::string instanceName)

template<typename ProductType , BranchType B>
BranchAliasSetterT< ProductType >	produces ()

template<class ProductType >
BranchAliasSetterT< ProductType >	produces (std::string instanceName)

template<typename ProductType , Transition B>
BranchAliasSetterT< ProductType >	produces ()

template<Transition Tr = Transition::Event>
auto	produces () noexcept

ProducesCollector	producesCollector ()

Protected Member Functions inherited from edm::EDConsumerBase
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)

template<BranchType B = InEvent>
EDConsumerBaseAdaptor< B >	consumes (edm::InputTag tag) noexcept

EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)

ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...

template<typename ESProduct , typename ESRecord , Transition Tr = Transition::Event>
auto	esConsumes ()

template<typename ESProduct , typename ESRecord , Transition Tr = Transition::Event>
auto	esConsumes (ESInputTag const &tag)

template<Transition Tr = Transition::Event>
constexpr auto	esConsumes ()

template<Transition Tr = Transition::Event>
auto	esConsumes (ESInputTag tag)

template<Transition Tr = Transition::Event>
ESGetTokenGeneric	esConsumes (eventsetup::EventSetupRecordKey const &iRecord, eventsetup::DataKey const &iKey)
	Used with EventSetupRecord::doGet. More...

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)

EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

void	resetItemsToGetFrom (BranchType iType)

Protected Attributes inherited from DQMEDHarvester
DQMStore *	dqmstore_

edm::GetterOfProducts< DQMToken >	jobmegetter_

edm::EDPutTokenT< DQMToken >	jobToken_

edm::GetterOfProducts< DQMToken >	lumimegetter_

edm::EDPutTokenT< DQMToken >	lumiToken_

edm::GetterOfProducts< DQMToken >	runmegetter_

edm::EDPutTokenT< DQMToken >	runToken_

Detailed Description

Description: reads the intermediate ALCAPROMPT DQMIO-like dataset and performs the fitting of the SiStrip Lorentz Angle in the Prompt Calibration Loop

Definition at line 48 of file SiStripLorentzAnglePCLHarvester.cc.

Constructor & Destructor Documentation

◆ SiStripLorentzAnglePCLHarvester()

SiStripLorentzAnglePCLHarvester::SiStripLorentzAnglePCLHarvester ( const edm::ParameterSet & iConfig )

Definition at line 117 of file SiStripLorentzAnglePCLHarvester.cc.

     : geomEsToken_(esConsumes<edm::Transition::BeginRun>()),
       topoEsTokenBR_(esConsumes<edm::Transition::BeginRun>()),
       topoEsTokenER_(esConsumes<edm::Transition::EndRun>()),
       tkDetMapTokenER_(esConsumes<edm::Transition::EndRun>()),
       latencyToken_(esConsumes<edm::Transition::BeginRun>()),
       siStripLAEsToken_(esConsumes<edm::Transition::BeginRun>()),
       magneticFieldToken_(esConsumes<edm::Transition::BeginRun>()),
       mismatchedBField_{false},
       mismatchedLatency_{false},
       debug_(iConfig.getParameter<bool>("debugMode")),
       dqmDir_(iConfig.getParameter<std::string>("dqmDir")),
       fitRange_(iConfig.getParameter<std::vector<double>>("fitRange")),
       recordName_(iConfig.getParameter<std::string>("record")) {
   // initialize the fit range
   if (fitRange_.size() == 2) {
     theFitRange_.first = fitRange_[0];
     theFitRange_.second = fitRange_[1];
   } else {
     throw cms::Exception("SiStripLorentzAnglePCLHarvester") << "Too many fit range parameters specified";
   }
 
   // first ensure DB output service is available
   edm::Service<cond::service::PoolDBOutputService> poolDbService;
   if (!poolDbService.isAvailable())
     throw cms::Exception("SiStripLorentzAnglePCLHarvester") << "PoolDBService required";
 }

◆ ~SiStripLorentzAnglePCLHarvester()

SiStripLorentzAnglePCLHarvester::~SiStripLorentzAnglePCLHarvester ( )

overridedefault

Member Function Documentation

◆ beginRun()

void SiStripLorentzAnglePCLHarvester::beginRun	(	const edm::Run &	iRun,
		const edm::EventSetup &	iSetup
	)

override

Definition at line 146 of file SiStripLorentzAnglePCLHarvester.cc.

References SiStripLorentzAngleCalibrationHistograms::apvmode_, siStripLACalibration::apvModeAsString(), SiStripLorentzAngleCalibrationHistograms::bfield_, currentLorentzAngle_, siStripLACalibration::fieldAsString(), relativeConstraints::geom, geomEsToken_, edm::EventSetup::getData(), SiStripLorentzAngle::getLorentzAngle(), iHists_, MagneticField::inverseBzAtOriginInGeV(), SiStripLorentzAngleCalibrationHistograms::la_db_, latencyToken_, magneticFieldToken_, mismatchedBField_, mismatchedLatency_, siStripLACalibration::moduleLocationType(), SiStripLorentzAngleCalibrationHistograms::moduleLocationType_, siStripLAEsToken_, teslaToInverseGeV_, theMagField_, and topoEsTokenBR_.

                                                                                               {
   // geometry
   const TrackerGeometry* geom = &iSetup.getData(geomEsToken_);
   const TrackerTopology* tTopo = &iSetup.getData(topoEsTokenBR_);
 
   const MagneticField* magField = &iSetup.getData(magneticFieldToken_);
   currentLorentzAngle_ = &iSetup.getData(siStripLAEsToken_);
 
   // B-field value
   // inverseBzAtOriginInGeV() returns the inverse of field z component for this map in GeV
   // for the conversion please consult https://github.com/cms-sw/cmssw/blob/master/MagneticField/Engine/src/MagneticField.cc#L17
   // theInverseBzAtOriginInGeV = 1.f / (at0z * 2.99792458e-3f);
   // ==> at0z = 1.f / (theInverseBzAtOriginInGeV * 2.99792458e-3f)
 
   theMagField_ = 1.f / (magField->inverseBzAtOriginInGeV() * teslaToInverseGeV_);
 
   if (iHists_.bfield_.empty()) {
     iHists_.bfield_ = siStripLACalibration::fieldAsString(theMagField_);
   } else {
     if (iHists_.bfield_ != siStripLACalibration::fieldAsString(theMagField_)) {
       mismatchedBField_ = true;
     }
   }
 
   const SiStripLatency* apvlat = &iSetup.getData(latencyToken_);
   if (iHists_.apvmode_.empty()) {
     iHists_.apvmode_ = siStripLACalibration::apvModeAsString(apvlat);
   } else {
     if (iHists_.apvmode_ != siStripLACalibration::apvModeAsString(apvlat)) {
       mismatchedLatency_ = true;
     }
   }
 
   auto dets = geom->detsTIB();
   dets.insert(dets.end(), geom->detsTID().begin(), geom->detsTID().end());
   dets.insert(dets.end(), geom->detsTOB().begin(), geom->detsTOB().end());
   dets.insert(dets.end(), geom->detsTEC().begin(), geom->detsTEC().end());
 
   for (auto det : dets) {
     auto detid = det->geographicalId().rawId();
     const StripGeomDetUnit* stripDet = dynamic_cast<const StripGeomDetUnit*>(geom->idToDet(det->geographicalId()));
     if (stripDet) {
       iHists_.la_db_[detid] = currentLorentzAngle_->getLorentzAngle(detid);
       iHists_.moduleLocationType_[detid] = siStripLACalibration::moduleLocationType(detid, tTopo);
     }
   }
 }

◆ dqmEndJob()

void SiStripLorentzAnglePCLHarvester::dqmEndJob	(	DQMStore::IBooker &	iBooker,
		DQMStore::IGetter &	iGetter
	)

overrideprivatevirtual

Implements DQMEDHarvester.

Definition at line 205 of file SiStripLorentzAnglePCLHarvester.cc.

References funct::abs(), mixOne_premix_on_sim_cfi::accumulator, SiStripLorentzAngleCalibrationHistograms::apvmode_, SiStripLorentzAnglePCLHarvester::LATkMap::beautify(), SiStripLorentzAngleCalibrationHistograms::bfield_, dqm::implementation::IBooker::book2D(), dqm::implementation::IBooker::bookProfile(), dqm::implementation::NavigatorBase::cd(), currentLorentzAngle_, cond::service::PoolDBOutputService::currentTime(), debug_, dqmDir_, cppFunctionSkipper::exception, Exception, f, SiStripLorentzAnglePCLHarvester::LATkMap::fill(), spr::find(), siStripLACalibration::fitFunction(), dqm-mbProfile::format, dqm::implementation::IGetter::get(), SiStripLorentzAngle::getLorentzAngle(), getStem(), dqm::impl::MonitorElement::getTH2F(), SiStripLorentzAngleCalibrationHistograms::h2_, SiStripLorentzAngleCalibrationHistograms::h2_byLayerDiff_, SiStripLorentzAngleCalibrationHistograms::h2_byLayerLA_, h_modulesLA, LaserClient_cfi::high, trackingPlots::hp, iHists_, edm::Service< T >::isAvailable(), ALPAKA_ACCELERATOR_NAMESPACE::vertexFinder::it, MainPageGenerator::l, SiStripLorentzAngleCalibrationHistograms::la_db_, label, nano_mu_digi_cff::layer, hgcalTBTopologyTester_cfi::layers, siStripLACalibration::locationTypeIndex(), LogDebug, LogTrace, LaserClient_cfi::low, DiMuonMassBiasClient_cfi::MEtoHarvest, mismatchedBField_, mismatchedLatency_, SiStripLorentzAngleCalibrationHistograms::modtypes_, edm::one::EDProducerBase::moduleDescription(), SiStripLorentzAngleCalibrationHistograms::moduleLocationType_, EcalCalibMonitorClient_cfi::moduleName, nlayers, SiStripLorentzAngleCalibrationHistograms::nlayers_, SiStripLorentzAngleCalibrationHistograms::p_, recordName_, dqm::impl::MonitorElement::setBinContent(), dqm::implementation::NavigatorBase::setCurrentFolder(), AlCaHLTBitMon_QueryRunRegistry::string, submitPVValidationJobs::t, theFitRange_, theMagField_, tkDetMap_, cms::Exception::what(), and cond::service::PoolDBOutputService::writeOneIOV().

                                                                                                   {
   if (mismatchedBField_) {
     throw cms::Exception("SiStripLorentzAnglePCLHarvester") << "Trying to harvest runs with different B-field values!";
   }
 
   if (mismatchedLatency_) {
     throw cms::Exception("SiStripLorentzAnglePCLHarvester") << "Trying to harvest runs with diffent APV modes!";
   }
 
   // go in the right directory
   iGetter.cd();
   std::string bvalue = (iHists_.bfield_ == "3.8") ? "B-ON" : "B-OFF";
   std::string folderToHarvest = fmt::format("{}/{}_{}", dqmDir_, bvalue, iHists_.apvmode_);
   edm::LogPrint(moduleDescription().moduleName()) << "Harvesting in " << folderToHarvest;
   iGetter.setCurrentFolder(folderToHarvest);
 
   // fill in the module types
   iHists_.nlayers_["TIB"] = 4;
   iHists_.nlayers_["TOB"] = 6;
   iHists_.modtypes_.push_back("s");
   iHists_.modtypes_.push_back("a");
 
   std::vector<std::string> MEtoHarvest = {"tanthcosphtrk_nstrip",
                                           "thetatrk_nstrip",
                                           "tanthcosphtrk_var2",
                                           "tanthcosphtrk_var3",
                                           "thcosphtrk_var2",
                                           "thcosphtrk_var3"};
 
   // prepare the histograms to be harvested
   for (auto& layers : iHists_.nlayers_) {
     std::string subdet = layers.first;
     for (int l = 1; l <= layers.second; ++l) {
       for (auto& t : iHists_.modtypes_) {
         // do not fill stereo where there aren't
         if (l > 2 && t == "s")
           continue;
         std::string locationtype = Form("%s_L%d%s", subdet.c_str(), l, t.c_str());
         for (const auto& toHarvest : MEtoHarvest) {
           const char* address = Form(
               "%s/%s/L%d/%s_%s", folderToHarvest.c_str(), subdet.c_str(), l, locationtype.c_str(), toHarvest.c_str());
 
           LogDebug(moduleDescription().moduleName()) << "harvesting at: " << address << std::endl;
 
           iHists_.h2_[Form("%s_%s", locationtype.c_str(), toHarvest.c_str())] = iGetter.get(address);
           if (iHists_.h2_[Form("%s_%s", locationtype.c_str(), toHarvest.c_str())] == nullptr) {
             edm::LogError(moduleDescription().moduleName())
                 << "could not retrieve: " << Form("%s_%s", locationtype.c_str(), toHarvest.c_str());
           }
         }
       }
     }
   }
 
   // book the summary output histograms
   iBooker.setCurrentFolder(fmt::format("{}Harvesting/LorentzAngleMaps", dqmDir_));
 
   // Define a lambda function to extract the second element and add it to the accumulator
   auto sumValues = [](int accumulator, const std::pair<std::string, int>& element) {
     return accumulator + element.second;
   };
 
   // Use std::accumulate to sum the values
   int totalLayers = std::accumulate(iHists_.nlayers_.begin(), iHists_.nlayers_.end(), 0, sumValues);
 
   // Lambda expression to set bin labels for a TH2F histogram
   auto setHistoLabels = [](TH2F* histogram, const std::map<std::string, int>& nlayers) {
     // Set common options
     histogram->SetOption("colz1");  // don't fill empty bins
     histogram->SetStats(false);
     histogram->GetYaxis()->SetLabelSize(0.05);
     histogram->GetXaxis()->SetLabelSize(0.05);
 
     // Set bin labels for the X-axis
     histogram->GetXaxis()->SetBinLabel(1, "r-#phi");
     histogram->GetXaxis()->SetBinLabel(2, "stereo");
 
     // Set bin labels for the Y-axis
     int binCounter = 1;
     for (const auto& subdet : {"TIB", "TOB"}) {
       for (int layer = 1; layer <= nlayers.at(subdet); ++layer) {
         std::string label = Form("%s L%d", subdet, layer);
         histogram->GetYaxis()->SetBinLabel(binCounter++, label.c_str());
       }
     }
     histogram->GetXaxis()->LabelsOption("h");
   };
 
   std::string d_name = "h2_byLayerSiStripLA";
   std::string d_text = "SiStrip tan#theta_{LA}/B;module type (r-#phi/stereo);layer number;tan#theta_{LA}/B [1/T]";
   iHists_.h2_byLayerLA_ =
       iBooker.book2D(d_name.c_str(), d_text.c_str(), 2, -0.5, 1.5, totalLayers, -0.5, totalLayers - 0.5);
 
   setHistoLabels(iHists_.h2_byLayerLA_->getTH2F(), iHists_.nlayers_);
 
   d_name = "h2_byLayerSiStripLADiff";
   d_text = "SiStrip #Delta#mu_{H}/#mu_{H};module type (r-#phi/stereo);ladder number;#Delta#mu_{H}/#mu_{H} [%%]";
   iHists_.h2_byLayerDiff_ =
       iBooker.book2D(d_name.c_str(), d_text.c_str(), 2, -0.5, 1.5, totalLayers, -0.5, totalLayers - 0.5);
 
   setHistoLabels(iHists_.h2_byLayerDiff_->getTH2F(), iHists_.nlayers_);
 
   // prepare the profiles
   for (const auto& ME : iHists_.h2_) {
     if (!ME.second)
       continue;
     // draw colored 2D plots
     ME.second->setOption("colz");
     TProfile* hp = (TProfile*)ME.second->getTH2F()->ProfileX();
     iBooker.setCurrentFolder(folderToHarvest + "/" + getStem(ME.first, /* isFolder = */ true));
     iHists_.p_[hp->GetName()] = iBooker.bookProfile(hp->GetName(), hp);
     iHists_.p_[hp->GetName()]->setAxisTitle(ME.second->getAxisTitle(2), 2);
     delete hp;
   }
 
   if (iHists_.p_.empty()) {
     edm::LogError(moduleDescription().moduleName()) << "None of the input histograms could be retrieved. Aborting";
     return;
   }
 
   std::map<std::string, std::pair<double, double>> LAMap_;
 
   // do the fits
   for (const auto& prof : iHists_.p_) {
     //fit only this type of profile
     if ((prof.first).find("thetatrk_nstrip") != std::string::npos) {
       // Create the TF1 function
 
       // fitting range (take full axis by default)
       double low = prof.second->getAxisMin(1);
       double high = prof.second->getAxisMax(1);
       if (theFitRange_.first > theFitRange_.second) {
         low = theFitRange_.first;
         high = theFitRange_.second;
       }
 
       TF1* fitFunc = new TF1("fitFunc", siStripLACalibration::fitFunction, low, high, 3);
 
       // Fit the function to the data
       prof.second->getTProfile()->Fit(fitFunc, "F");  // "F" option performs a least-squares fit
 
       // Get the fit results
       Double_t a_fit = fitFunc->GetParameter(0);
       Double_t thetaL_fit = fitFunc->GetParameter(1);
       Double_t b_fit = fitFunc->GetParameter(2);
 
       Double_t a_fitError = fitFunc->GetParError(0);
       Double_t thetaL_fitError = fitFunc->GetParError(1);
       Double_t b_fitError = fitFunc->GetParError(2);
 
       if (debug_) {
         edm::LogInfo(moduleDescription().moduleName())
             << prof.first << " fit result: "
             << " a=" << a_fit << " +/ " << a_fitError << " theta_L=" << thetaL_fit << " +/- " << thetaL_fitError
             << " b=" << b_fit << " +/- " << b_fitError;
       }
 
       LAMap_[getStem(prof.first, /* isFolder = */ false)] = std::make_pair(thetaL_fit, thetaL_fitError);
     }
   }
 
   if (debug_) {
     for (const auto& element : LAMap_) {
       edm::LogInfo(moduleDescription().moduleName())
           << element.first << " thetaLA = " << element.second.first << "+/-" << element.second.second;
     }
   }
 
   // now prepare the output LA
   std::shared_ptr<SiStripLorentzAngle> OutLorentzAngle = std::make_shared<SiStripLorentzAngle>();
 
   bool isPayloadChanged{false};
   std::vector<std::pair<int, int>> treatedIndices;
   for (const auto& loc : iHists_.moduleLocationType_) {
     if (debug_) {
       edm::LogInfo(moduleDescription().moduleName()) << "modId: " << loc.first << " " << loc.second;
     }
 
     if (!(loc.second).empty() && theMagField_ != 0.f) {
       OutLorentzAngle->putLorentzAngle(loc.first, std::abs(LAMap_[loc.second].first / theMagField_));
     } else {
       OutLorentzAngle->putLorentzAngle(loc.first, iHists_.la_db_[loc.first]);
     }
 
     // if the location is  not assigned (e.g. TID or TEC) continue
     if ((loc.second).empty()) {
       continue;
     }
 
     const auto& index2D = siStripLACalibration::locationTypeIndex(loc.second);
     LogDebug("SiStripLorentzAnglePCLHarvester")
         << loc.first << " : " << loc.second << " index: " << index2D.first << "-" << index2D.second << std::endl;
 
     // check if the location exists, otherwise throw!
     if (index2D != std::make_pair(-1, -1)) {
       // Check if index2D is in treatedIndices
       // Do not fill the control plots more than necessary (i.e. 1 entry per "partition")
       auto it = std::find(treatedIndices.begin(), treatedIndices.end(), index2D);
       if (it == treatedIndices.end()) {
         // control plots
         LogTrace("SiStripLorentzAnglePCLHarvester") << "accepted " << loc.first << " : " << loc.second << " bin ("
                                                     << index2D.first << "," << index2D.second << ")";
 
         const auto& outputLA = OutLorentzAngle->getLorentzAngle(loc.first);
         const auto& inputLA = currentLorentzAngle_->getLorentzAngle(loc.first);
 
         LogTrace("SiStripLorentzAnglePCLHarvester") << "inputLA: " << inputLA << " outputLA: " << outputLA;
 
         iHists_.h2_byLayerLA_->setBinContent(index2D.first, index2D.second, outputLA);
 
         float deltaMuHoverMuH = (inputLA != 0.f) ? (inputLA - outputLA) / inputLA : 0.f;
         iHists_.h2_byLayerDiff_->setBinContent(index2D.first, index2D.second, deltaMuHoverMuH * 100.f);
         treatedIndices.emplace_back(index2D);
 
         // Check if the delta is different from zero
         // and if the output LA is not zero (during B=0T running)
         // If none of the locations has a non-zero diff
         // will not write out the payload.
         if (deltaMuHoverMuH != 0.f && outputLA != 0.f) {
           isPayloadChanged = true;
           LogDebug("SiStripLorentzAnglePCLHarvester")
               << "accepted " << loc.first << " : " << loc.second << " bin (" << index2D.first << "," << index2D.second
               << ") " << deltaMuHoverMuH;
         } else {
           edm::LogWarning("SiStripLorentzAnglePCLHarvester")
               << "Discarded " << loc.first << " : " << loc.second << " bin (" << index2D.first << "," << index2D.second
               << ") | delta muH/muH = " << deltaMuHoverMuH << " [1/T], output muH = " << outputLA << " [1/T]";
         }
       }  // if the index has not been treated already
     } else {
       throw cms::Exception("SiStripLorentzAnglePCLHarvester")
           << "Trying to fill an inexistent module location from " << loc.second << "!";
     }  //
   }    // ends loop on location types
 
   // book the TkDetMaps
   const auto tkDetMapFolderIn = (fmt::format("{}Harvesting/TkDetMaps_LAInput", dqmDir_));
   const auto tkDetMapFolderOut = (fmt::format("{}Harvesting/TkDetMaps_LAOutput", dqmDir_));
   h_modulesLA = LATkMap(
       std::make_unique<TkHistoMap>(tkDetMap_.get(), iBooker, tkDetMapFolderIn, "inputLorentzAngle", 0, false, true),
       std::make_unique<TkHistoMap>(tkDetMap_.get(), iBooker, tkDetMapFolderOut, "outputLorentzAngle", 0, false, true));
 
   // fill the TkDetMaps
   for (const auto& loc : iHists_.moduleLocationType_) {
     const auto& outputLA = OutLorentzAngle->getLorentzAngle(loc.first);
     const auto& inputLA = currentLorentzAngle_->getLorentzAngle(loc.first);
     h_modulesLA.fill(loc.first, inputLA, outputLA);
   }
 
   // set colz to the output maps
   h_modulesLA.beautify();
 
   if (isPayloadChanged) {
     // fill the DB object record
     edm::Service<cond::service::PoolDBOutputService> mydbservice;
     if (mydbservice.isAvailable()) {
       try {
         mydbservice->writeOneIOV(*OutLorentzAngle, mydbservice->currentTime(), recordName_);
       } catch (const cond::Exception& er) {
         edm::LogError("SiStripLorentzAngleDB") << er.what();
       } catch (const std::exception& er) {
         edm::LogError("SiStripLorentzAngleDB") << "caught std::exception " << er.what();
       }
     } else {
       edm::LogError("SiStripLorentzAngleDB") << "Service is unavailable!";
     }
   } else {
     edm::LogPrint("SiStripLorentzAngleDB")
         << "****** WARNING ******\n* " << __PRETTY_FUNCTION__
         << "\n* There is no new valid measurement to append!\n* Will NOT update the DB!\n*********************";
   }
 }

◆ endRun()

void SiStripLorentzAnglePCLHarvester::endRun	(	const edm::Run &	run,
		const edm::EventSetup &	isetup
	)

overrideprivate

Definition at line 195 of file SiStripLorentzAnglePCLHarvester.cc.

References edm::EventSetup::getData(), theTrackerTopology_, tkDetMap_, tkDetMapTokenER_, and topoEsTokenER_.

                                                                                            {
   if (!theTrackerTopology_) {
     theTrackerTopology_ = std::make_unique<TrackerTopology>(isetup.getData(topoEsTokenER_));
   }
   if (!tkDetMap_) {
     tkDetMap_ = std::make_unique<TkDetMap>(isetup.getData(tkDetMapTokenER_));
   }
 }

◆ fillDescriptions()

void SiStripLorentzAnglePCLHarvester::fillDescriptions ( edm::ConfigurationDescriptions & descriptions )

static

Definition at line 502 of file SiStripLorentzAnglePCLHarvester.cc.

References edm::ConfigurationDescriptions::addWithDefaultLabel(), submitPVResolutionJobs::desc, and AlCaHLTBitMon_QueryRunRegistry::string.

                                                                                                  {
   edm::ParameterSetDescription desc;
   desc.setComment("Harvester module of the SiStrip Lorentz Angle PCL monitoring workflow");
   desc.add<bool>("debugMode", false)->setComment("determines if it's in debug mode");
   desc.add<std::string>("dqmDir", "AlCaReco/SiStripLorentzAngle")->setComment("the directory of PCL Worker output");
   desc.add<std::vector<double>>("fitRange", {0., 0.})->setComment("range of depths to perform the LA fit");
   desc.add<std::string>("record", "SiStripLorentzAngleRcd")->setComment("target DB record");
   descriptions.addWithDefaultLabel(desc);
 }

◆ getStem()

std::string SiStripLorentzAnglePCLHarvester::getStem	(	const std::string &	histoName,
		bool	isFolder
	)

private

Definition at line 479 of file SiStripLorentzAnglePCLHarvester.cc.

References HltBtagPostValidation_cff::histoName, convertSQLitetoXML_cfg::output, AlCaHLTBitMon_QueryRunRegistry::string, and unpackBuffers-CaloStage2::token.

Referenced by dqmEndJob().

                                                                                             {
   std::vector<std::string> tokens;
 
   std::string output{};
   // Create a string stream from the input string
   std::istringstream iss(histoName);
 
   std::string token;
   while (std::getline(iss, token, '_')) {
     // Add each token to the vector
     tokens.push_back(token);
   }
 
   if (isFolder) {
     output = tokens[0] + "/" + tokens[1];
     output.pop_back();
   } else {
     output = tokens[0] + "_" + tokens[1];
   }
   return output;
 }