Inheritance diagram for DDEcalBarrelNewAlgo:

Public Types
typedef HepGeom::Point3D< double >	Pt3D

typedef HepGeom::ReflectZ3D	RfZ3D

typedef HepGeom::Rotate3D	Ro3D

typedef CLHEP::HepRotation	Rota

typedef HepGeom::RotateX3D	RoX3D

typedef HepGeom::RotateY3D	RoY3D

typedef HepGeom::RotateZ3D	RoZ3D

typedef HepGeom::Transform3D	Tf3D

typedef HepGeom::Translate3D	Tl3D

typedef EcalTrapezoidParameters	Trap

typedef CLHEP::Hep3Vector	Vec3

Public Member Functions
DDMaterial	aglMat () const

DDName	aglName () const

double	aglThick () const

DDMaterial	andMat () const

DDName	andName () const

double	andThick () const

DDMaterial	apdMat () const

DDName	apdName () const

double	apdSide () const

double	apdThick () const

double	apdX1 () const

double	apdX2 () const

double	apdZ () const

DDMaterial	atjMat () const

DDName	atjName () const

double	atjThick () const

double	backBracketHeight () const

DDMaterial	backBracketMat () const

const std::string &	backBracketName () const

double	backCBStdSep () const

double	backCoolBarHeight () const

double	backCoolBarHere () const

DDMaterial	backCoolBarMat () const

DDName	backCoolBarName () const

DDMaterial	backCoolBarSSMat () const

DDName	backCoolBarSSName () const

double	backCoolBarSSThick () const

double	backCoolBarThick () const

DDMaterial	backCoolBarWaMat () const

DDName	backCoolBarWaName () const

double	backCoolBarWaThick () const

double	backCoolBarWidth () const

double	backCoolHere () const

DDMaterial	backCoolMat () const

double	backCoolTankHere () const

DDMaterial	backCoolTankMat () const

const std::string &	backCoolTankName () const

double	backCoolTankThick () const

DDMaterial	backCoolTankWaMat () const

const std::string &	backCoolTankWaName () const

double	backCoolTankWaWidth () const

double	backCoolTankWidth () const

double	backCoolVFEHere () const

DDMaterial	backCoolVFEMat () const

DDName	backCoolVFEName () const

double	backHere () const

double	backMiscHere () const

double	backPipeHere () const

DDMaterial	backPipeMat () const

const std::string &	backPipeName () const

DDMaterial	backPipeWaterMat () const

DDMaterial	backPlate2Mat () const

DDName	backPlate2Name () const

double	backPlate2Thick () const

double	backPlateHere () const

double	backPlateLength () const

DDMaterial	backPlateMat () const

DDName	backPlateName () const

double	backPlateThick () const

double	backPlateWidth () const

double	backSideAngle () const

double	backSideHeight () const

double	backSideHere () const

double	backSideLength () const

DDMaterial	backSideMat () const

DDName	backSideName () const

double	backSideWidth () const

double	backSideYOff1 () const

double	backSideYOff2 () const

DDMaterial	backVFEMat () const

DDName	backVFEName () const

double	backXOff () const

double	backYOff () const

double	barHere () const

DDMaterial	barMat () const

DDName	barName () const

double	barPhiHi () const

double	barPhiLo () const

DDMaterial	bsiMat () const

DDName	bsiName () const

double	bsiThick () const

double	bsiXSize () const

double	bsiYSize () const

double	capHere () const

DDMaterial	capMat () const

DDName	capName () const

double	capThick () const

double	capXSize () const

double	capYSize () const

DDMaterial	cerMat () const

DDName	cerName () const

double	cerThick () const

double	cerXSize () const

double	cerYSize () const

double	clrFrAlv () const

DDMaterial	clrMat () const

const std::string &	clrName () const

double	clrReAlv () const

double	clrThAlv () const

DDMaterial	cryMat () const

const std::string &	cryName () const

	DDEcalBarrelNewAlgo ()

DDMaterial	ddmat (const std::string &s) const

DDName	ddname (const std::string &s) const

double	dryAirTubeHere () const

double	dryAirTubeInnDiam () const

DDMaterial	dryAirTubeMat () const

const std::string &	dryAirTubeName () const

double	dryAirTubeOutDiam () const

void	execute (DDCompactView &cpv) override

double	fawDelPhi () const

double	fawHere () const

DDName	fawName () const

double	fawPhiOff () const

double	fawPhiRot () const

double	fawRadOff () const

double	grEdgeSlotHeight () const

double	grEdgeSlotHere () const

DDMaterial	grEdgeSlotMat () const

DDName	grEdgeSlotName () const

double	grEdgeSlotWidth () const

double	gridHere () const

DDMaterial	gridMat () const

DDName	gridName () const

double	gridThick () const

double	grilleHere () const

DDMaterial	grilleMat () const

const std::string &	grilleName () const

double	grilleThick () const

double	grilleWidth () const

double	grilleZSpace () const

double	grMidSlotHere () const

DDMaterial	grMidSlotMat () const

const std::string &	grMidSlotName () const

double	grMidSlotWidth () const

double	grMidSlotXOff () const

double	hawRCutDelY () const

double	hawRCutY () const

double	hawRCutZ () const

double	hawRHBIG () const

double	hawRhsml () const

DDName	hawRName () const

double	hawYOffCry () const

const std::string &	idNameSpace () const

double	ilyBndlLength () const

DDMaterial	ilyBndlMat () const

DDName	ilyBndlName () const

double	ilyBndlOff () const

double	ilyDelPhi () const

double	ilyDiffLength () const

DDMaterial	ilyDiffMat () const

DDName	ilyDiffName () const

double	ilyDiffOff () const

double	ilyFanOutHeight () const

double	ilyFanOutHere () const

double	ilyFanOutLength () const

DDMaterial	ilyFanOutMat () const

DDName	ilyFanOutName () const

double	ilyFanOutWidth () const

double	ilyFEMHeight () const

double	ilyFEMLength () const

DDMaterial	ilyFEMMat () const

DDName	ilyFEMName () const

double	ilyFEMWidth () const

double	ilyHere () const

const std::string &	ilyName () const

double	ilyPhiLow () const

double	ilyPipeHere () const

double	ilyPipeID () const

DDMaterial	ilyPipeMat () const

const std::string &	ilyPipeName () const

double	ilyPipeOD () const

double	ilyPTMHeight () const

double	ilyPTMHere () const

double	ilyPTMLength () const

DDMaterial	ilyPTMMat () const

DDName	ilyPTMName () const

double	ilyPTMWidth () const

void	initialize (const DDNumericArguments &nArgs, const DDVectorArguments &vArgs, const DDMapArguments &mArgs, const DDStringArguments &sArgs, const DDStringVectorArguments &vsArgs) override

double	mBCoolTubeHere () const

double	mBCoolTubeInnDiam () const

DDMaterial	mBCoolTubeMat () const

const std::string &	mBCoolTubeName () const

double	mBCoolTubeNum () const

double	mBCoolTubeOutDiam () const

double	mBLyrHere () const

double	mBManifHere () const

double	mBManifInnDiam () const

DDMaterial	mBManifMat () const

DDName	mBManifName () const

double	mBManifOutDiam () const

DDRotation	myrot (const std::string &s, const CLHEP::HepRotation &r) const
	Create a DDRotation from a string converted to DDName and CLHEP::HepRotation converted to DDRotationMatrix. – Michael Case. More...

DDSolid	mytrap (const std::string &s, const Trap &t) const

unsigned int	nCryPerAlvEta () const

unsigned int	nCryTypes () const

unsigned int	nFawPerSupm () const

double	nomCryDimAF () const

double	nomCryDimLZ () const

double	patchPanelHere () const

DDName	patchPanelName () const

double	pincerBlkLength () const

DDMaterial	pincerBlkMat () const

DDName	pincerBlkName () const

double	pincerCutHeight () const

DDMaterial	pincerCutMat () const

DDName	pincerCutName () const

double	pincerCutWidth () const

double	pincerEnvHeight () const

double	pincerEnvLength () const

DDMaterial	pincerEnvMat () const

DDName	pincerEnvName () const

double	pincerEnvWidth () const

double	pincerRodHere () const

DDMaterial	pincerRodMat () const

DDName	pincerRodName () const

DDName	pincerShim1Name () const

double	pincerShim1Width () const

DDName	pincerShim2Name () const

double	pincerShim2Width () const

double	pincerShimHeight () const

DDMaterial	pincerShimMat () const

DDMaterial	sglMat () const

DDName	sglName () const

double	sglThick () const

DDName	spmCutName () const

double	spmCutRM () const

double	spmCutRP () const

int	spmCutShow () const

double	spmCutThick () const

double	spmDelPhi () const

double	spmExpThick () const

double	spmExpWide () const

double	spmExpYOff () const

double	spmLowPhi () const

DDMaterial	spmMat () const

DDName	spmName () const

unsigned int	spmNPerHalf () const

double	spmPhiOff () const

double	spmSideHigh () const

DDMaterial	spmSideMat () const

DDName	spmSideName () const

double	spmSideThick () const

double	spmSideYOffM () const

double	spmSideYOffP () const

double	underAF () const

double	underAR () const

double	underBF () const

double	underBR () const

double	underCF () const

double	underCR () const

double	underLZ () const

const std::vector< std::string > &	vecBackCoolName () const

const std::vector< double > &	vecBackCoolNPerSec () const

const std::vector< double > &	vecBackCoolNSec () const

const std::vector< double > &	vecBackCoolSecSep () const

const std::vector< std::string > &	vecBackMiscMat () const

const std::vector< std::string > &	vecBackMiscName () const

const std::vector< double > &	vecBackMiscThick () const

const std::vector< double > &	vecBackPipeDiam () const

const std::vector< double > &	vecBackPipeThick () const

const std::vector< std::string > &	vecBackVFELyrMat () const

const std::vector< std::string > &	vecBackVFELyrName () const

const std::vector< double > &	vecBackVFELyrThick () const

const std::vector< double > &	vecBarRMax () const

const std::vector< double > &	vecBarRMin () const

const std::vector< double > &	vecBarRota () const

const std::vector< double > &	vecBarRota2 () const

const std::vector< double > &	vecBarRota3 () const

const std::vector< double > &	vecBarTran () const

const std::vector< double > &	vecBarZPts () const

const std::vector< double > &	vecGapAlvEta () const

const std::vector< double > &	vecGrilleHeight () const

const std::vector< double > &	vecGrilleZOff () const

const std::vector< double > &	vecGrMidSlotHeight () const

const std::vector< double > &	vecIlyFanOutPhi () const

const std::vector< double > &	vecIlyFanOutZ () const

const std::vector< double > &	vecIlyFEMPhi () const

const std::vector< double > &	vecIlyFEMZ () const

const std::vector< std::string > &	vecIlyMat () const

const std::vector< double > &	vecIlyPipeLength () const

const std::vector< double > &	vecIlyPipePhi () const

const std::vector< double > &	vecIlyPipeType () const

const std::vector< double > &	vecIlyPipeZ () const

const std::vector< double > &	vecIlyPTMPhi () const

const std::vector< double > &	vecIlyPTMZ () const

const std::vector< double > &	vecIlyThick () const

const std::vector< std::string > &	vecMBLyrMat () const

const std::vector< std::string > &	vecMBLyrName () const

const std::vector< double > &	vecMBLyrThick () const

const std::vector< double > &	vecNomCryDimAR () const

const std::vector< double > &	vecNomCryDimBF () const

const std::vector< double > &	vecNomCryDimBR () const

const std::vector< double > &	vecNomCryDimCF () const

const std::vector< double > &	vecNomCryDimCR () const

const std::vector< std::string > &	vecPatchPanelMat () const

const std::vector< std::string > &	vecPatchPanelNames () const

const std::vector< double > &	vecPatchPanelThick () const

std::vector< double >	vecPincerEnvZOff () const

std::vector< double >	vecPincerRodAzimuth () const

const std::vector< double > &	vecSpmBRota () const

const std::vector< double > &	vecSpmBTran () const

const std::vector< double > &	vecSpmCutTM () const

const std::vector< double > &	vecSpmCutTP () const

const std::vector< double > &	vecSpmHere () const

const std::vector< double > &	vecSpmRMax () const

const std::vector< double > &	vecSpmRMin () const

const std::vector< double > &	vecSpmRota () const

const std::vector< double > &	vecSpmTran () const

const std::vector< double > &	vecSpmZPts () const

const std::vector< double > &	vecWebClrTh () const

const std::vector< double > &	vecWebLength () const

const std::vector< double > &	vecWebPlTh () const

double	wallFrAlv () const

DDMaterial	wallMat () const

const std::string &	wallName () const

double	wallReAlv () const

double	wallThAlv () const

DDMaterial	webClrMat () const

const std::string &	webClrName () const

double	webHere () const

DDMaterial	webPlMat () const

const std::string &	webPlName () const

double	wrapFrAlv () const

DDMaterial	wrapMat () const

const std::string &	wrapName () const

double	wrapReAlv () const

double	wrapThAlv () const

	~DDEcalBarrelNewAlgo () override

Private Member Functions
void	web (unsigned int iWeb, double bWeb, double BWeb, double LWeb, double theta, const Pt3D &corner, const DDLogicalPart &logPar, double &zee, double side, double front, double delta, DDCompactView &cpv)

Private Attributes
std::string	m_AGLMat

std::string	m_AGLName

double	m_AGLThick

std::string	m_ANDMat

std::string	m_ANDName

double	m_ANDThick

std::string	m_APDMat

std::string	m_APDName

double	m_APDSide

double	m_APDThick

double	m_APDX1

double	m_APDX2

double	m_APDZ

std::string	m_ATJMat

std::string	m_ATJName

double	m_ATJThick

double	m_BackBracketHeight

std::string	m_BackBracketMat

std::string	m_BackBracketName

double	m_BackCBStdSep

double	m_BackCoolBarHeight

double	m_BackCoolBarHere

std::string	m_BackCoolBarMat

std::string	m_BackCoolBarName

std::string	m_BackCoolBarSSMat

std::string	m_BackCoolBarSSName

double	m_BackCoolBarSSThick

double	m_BackCoolBarThick

std::string	m_BackCoolBarWaMat

std::string	m_BackCoolBarWaName

double	m_BackCoolBarWaThick

double	m_BackCoolBarWidth

double	m_BackCoolHere

std::string	m_BackCoolMat

double	m_BackCoolTankHere

std::string	m_BackCoolTankMat

std::string	m_BackCoolTankName

double	m_BackCoolTankThick

std::string	m_BackCoolTankWaMat

std::string	m_BackCoolTankWaName

double	m_BackCoolTankWaWidth

double	m_BackCoolTankWidth

double	m_BackCoolVFEHere

std::string	m_BackCoolVFEMat

std::string	m_BackCoolVFEName

double	m_BackHere

double	m_BackMiscHere

double	m_BackPipeHere

std::string	m_BackPipeMat

std::string	m_BackPipeName

std::string	m_BackPipeWaterMat

std::string	m_BackPlate2Mat

std::string	m_BackPlate2Name

double	m_BackPlate2Thick

double	m_BackPlateHere

double	m_BackPlateLength

std::string	m_BackPlateMat

std::string	m_BackPlateName

double	m_BackPlateThick

double	m_BackPlateWidth

double	m_BackSideAngle

double	m_BackSideHeight

double	m_BackSideHere

double	m_BackSideLength

std::string	m_BackSideMat

std::string	m_BackSideName

double	m_BackSideWidth

double	m_BackSideYOff1

double	m_BackSideYOff2

std::string	m_BackVFEMat

std::string	m_BackVFEName

double	m_BackXOff

double	m_BackYOff

double	m_BarHere

std::string	m_BarMat

std::string	m_BarName

double	m_BarPhiHi

double	m_BarPhiLo

std::string	m_BSiMat

std::string	m_BSiName

double	m_BSiThick

double	m_BSiXSize

double	m_BSiYSize

double	m_capHere

std::string	m_capMat

std::string	m_capName

double	m_capThick

double	m_capXSize

double	m_capYSize

std::string	m_CERMat

std::string	m_CERName

double	m_CERThick

double	m_CERXSize

double	m_CERYSize

double	m_ClrFrAlv

std::string	m_ClrMat

std::string	m_ClrName

double	m_ClrReAlv

double	m_ClrThAlv

std::string	m_CryMat

std::string	m_CryName

double	m_DryAirTubeHere

double	m_DryAirTubeInnDiam

std::string	m_DryAirTubeMat

std::string	m_DryAirTubeName

double	m_DryAirTubeOutDiam

double	m_FawDelPhi

double	m_FawHere

std::string	m_FawName

double	m_FawPhiOff

double	m_FawPhiRot

double	m_FawRadOff

double	m_GrEdgeSlotHeight

double	m_GrEdgeSlotHere

std::string	m_GrEdgeSlotMat

std::string	m_GrEdgeSlotName

double	m_GrEdgeSlotWidth

double	m_GridHere

std::string	m_GridMat

std::string	m_GridName

double	m_GridThick

double	m_GrilleHere

std::string	m_GrilleMat

std::string	m_GrilleName

double	m_GrilleThick

double	m_GrilleWidth

double	m_GrilleZSpace

double	m_GrMidSlotHere

std::string	m_GrMidSlotMat

std::string	m_GrMidSlotName

double	m_GrMidSlotWidth

double	m_GrMidSlotXOff

double	m_HawRCutDelY

double	m_HawRCutY

double	m_HawRCutZ

double	m_HawRHBIG

double	m_HawRhsml

std::string	m_HawRName

double	m_HawYOffCry

std::string	m_idNameSpace

double	m_IlyBndlLength

std::string	m_IlyBndlMat

std::string	m_IlyBndlName

double	m_IlyBndlOff

double	m_IlyDelPhi

double	m_IlyDiffLength

std::string	m_IlyDiffMat

std::string	m_IlyDiffName

double	m_IlyDiffOff

double	m_IlyFanOutHeight

double	m_IlyFanOutHere

double	m_IlyFanOutLength

std::string	m_IlyFanOutMat

std::string	m_IlyFanOutName

double	m_IlyFanOutWidth

double	m_IlyFEMHeight

double	m_IlyFEMLength

std::string	m_IlyFEMMat

std::string	m_IlyFEMName

double	m_IlyFEMWidth

double	m_IlyHere

std::string	m_IlyName

double	m_IlyPhiLow

double	m_IlyPipeHere

double	m_IlyPipeID

std::string	m_IlyPipeMat

std::string	m_IlyPipeName

double	m_IlyPipeOD

double	m_IlyPTMHeight

double	m_IlyPTMHere

double	m_IlyPTMLength

std::string	m_IlyPTMMat

std::string	m_IlyPTMName

double	m_IlyPTMWidth

double	m_MBCoolTubeHere

double	m_MBCoolTubeInnDiam

std::string	m_MBCoolTubeMat

std::string	m_MBCoolTubeName

unsigned int	m_MBCoolTubeNum

double	m_MBCoolTubeOutDiam

double	m_MBLyrHere

double	m_MBManifHere

double	m_MBManifInnDiam

std::string	m_MBManifMat

std::string	m_MBManifName

double	m_MBManifOutDiam

unsigned int	m_NCryPerAlvEta

unsigned int	m_NCryTypes

unsigned int	m_NFawPerSupm

double	m_NomCryDimAF

double	m_NomCryDimLZ

double	m_PatchPanelHere

std::string	m_PatchPanelName

double	m_PincerBlkLength

std::string	m_PincerBlkMat

std::string	m_PincerBlkName

double	m_PincerCutHeight

std::string	m_PincerCutMat

std::string	m_PincerCutName

double	m_PincerCutWidth

double	m_PincerEnvHeight

double	m_PincerEnvLength

std::string	m_PincerEnvMat

std::string	m_PincerEnvName

double	m_PincerEnvWidth

double	m_PincerRodHere

std::string	m_PincerRodMat

std::string	m_PincerRodName

std::string	m_PincerShim1Name

double	m_PincerShim1Width

std::string	m_PincerShim2Name

double	m_PincerShim2Width

double	m_PincerShimHeight

std::string	m_PincerShimMat

std::string	m_SGLMat

std::string	m_SGLName

double	m_SGLThick

std::string	m_SpmCutName

double	m_SpmCutRM

double	m_SpmCutRP

int	m_SpmCutShow

double	m_SpmCutThick

double	m_SpmDelPhi

double	m_SpmExpThick

double	m_SpmExpWide

double	m_SpmExpYOff

double	m_SpmLowPhi

std::string	m_SpmMat

std::string	m_SpmName

unsigned int	m_SpmNPerHalf

double	m_SpmPhiOff

double	m_SpmSideHigh

std::string	m_SpmSideMat

std::string	m_SpmSideName

double	m_SpmSideThick

double	m_SpmSideYOffM

double	m_SpmSideYOffP

double	m_UnderAF

double	m_UnderAR

double	m_UnderBF

double	m_UnderBR

double	m_UnderCF

double	m_UnderCR

double	m_UnderLZ

std::vector< std::string >	m_vecBackCoolName

std::vector< double >	m_vecBackCoolNPerSec

std::vector< double >	m_vecBackCoolNSec

std::vector< double >	m_vecBackCoolSecSep

std::vector< std::string >	m_vecBackMiscMat

std::vector< std::string >	m_vecBackMiscName

std::vector< double >	m_vecBackMiscThick

std::vector< double >	m_vecBackPipeDiam

std::vector< double >	m_vecBackPipeThick

std::vector< std::string >	m_vecBackVFELyrMat

std::vector< std::string >	m_vecBackVFELyrName

std::vector< double >	m_vecBackVFELyrThick

std::vector< double >	m_vecBarRMax

std::vector< double >	m_vecBarRMin

std::vector< double >	m_vecBarRota

std::vector< double >	m_vecBarRota2

std::vector< double >	m_vecBarRota3

std::vector< double >	m_vecBarTran

std::vector< double >	m_vecBarZPts

std::vector< double >	m_vecGapAlvEta

std::vector< double >	m_vecGrilleHeight

std::vector< double >	m_vecGrilleZOff

std::vector< double >	m_vecGrMidSlotHeight

std::vector< double >	m_vecIlyFanOutPhi

std::vector< double >	m_vecIlyFanOutZ

std::vector< double >	m_vecIlyFEMPhi

std::vector< double >	m_vecIlyFEMZ

std::vector< std::string >	m_vecIlyMat

std::vector< double >	m_vecIlyPipeLength

std::vector< double >	m_vecIlyPipePhi

std::vector< double >	m_vecIlyPipeType

std::vector< double >	m_vecIlyPipeZ

std::vector< double >	m_vecIlyPTMPhi

std::vector< double >	m_vecIlyPTMZ

std::vector< double >	m_vecIlyThick

std::vector< std::string >	m_vecMBLyrMat

std::vector< std::string >	m_vecMBLyrName

std::vector< double >	m_vecMBLyrThick

std::vector< double >	m_vecNomCryDimAR

std::vector< double >	m_vecNomCryDimBF

std::vector< double >	m_vecNomCryDimBR

std::vector< double >	m_vecNomCryDimCF

std::vector< double >	m_vecNomCryDimCR

std::vector< std::string >	m_vecPatchPanelMat

std::vector< std::string >	m_vecPatchPanelNames

std::vector< double >	m_vecPatchPanelThick

std::vector< double >	m_vecPincerEnvZOff

std::vector< double >	m_vecPincerRodAzimuth

std::vector< double >	m_vecSpmBRota

std::vector< double >	m_vecSpmBTran

std::vector< double >	m_vecSpmCutTM

std::vector< double >	m_vecSpmCutTP

std::vector< double >	m_vecSpmHere

std::vector< double >	m_vecSpmRMax

std::vector< double >	m_vecSpmRMin

std::vector< double >	m_vecSpmRota

std::vector< double >	m_vecSpmTran

std::vector< double >	m_vecSpmZPts

std::vector< double >	m_vecWebClrTh

std::vector< double >	m_vecWebLength

std::vector< double >	m_vecWebPlTh

double	m_WallFrAlv

std::string	m_WallMat

std::string	m_WallName

double	m_WallReAlv

double	m_WallThAlv

std::string	m_WebClrMat

std::string	m_WebClrName

double	m_WebHere

std::string	m_WebPlMat

std::string	m_WebPlName

double	m_WrapFrAlv

std::string	m_WrapMat

std::string	m_WrapName

double	m_WrapReAlv

double	m_WrapThAlv

Detailed Description

Definition at line 33 of file DDEcalBarrelNewAlgo.cc.

Member Typedef Documentation

◆ Pt3D

typedef HepGeom::Point3D<double> DDEcalBarrelNewAlgo::Pt3D

Definition at line 36 of file DDEcalBarrelNewAlgo.cc.

◆ RfZ3D

typedef HepGeom::ReflectZ3D DDEcalBarrelNewAlgo::RfZ3D

Definition at line 38 of file DDEcalBarrelNewAlgo.cc.

◆ Ro3D

typedef HepGeom::Rotate3D DDEcalBarrelNewAlgo::Ro3D

Definition at line 40 of file DDEcalBarrelNewAlgo.cc.

◆ Rota

typedef CLHEP::HepRotation DDEcalBarrelNewAlgo::Rota

Definition at line 46 of file DDEcalBarrelNewAlgo.cc.

◆ RoX3D

typedef HepGeom::RotateX3D DDEcalBarrelNewAlgo::RoX3D

Definition at line 43 of file DDEcalBarrelNewAlgo.cc.

◆ RoY3D

typedef HepGeom::RotateY3D DDEcalBarrelNewAlgo::RoY3D

Definition at line 42 of file DDEcalBarrelNewAlgo.cc.

◆ RoZ3D

typedef HepGeom::RotateZ3D DDEcalBarrelNewAlgo::RoZ3D

Definition at line 41 of file DDEcalBarrelNewAlgo.cc.

◆ Tf3D

typedef HepGeom::Transform3D DDEcalBarrelNewAlgo::Tf3D

Definition at line 37 of file DDEcalBarrelNewAlgo.cc.

◆ Tl3D

typedef HepGeom::Translate3D DDEcalBarrelNewAlgo::Tl3D

Definition at line 39 of file DDEcalBarrelNewAlgo.cc.

◆ Trap

typedef EcalTrapezoidParameters DDEcalBarrelNewAlgo::Trap

Definition at line 35 of file DDEcalBarrelNewAlgo.cc.

◆ Vec3

typedef CLHEP::Hep3Vector DDEcalBarrelNewAlgo::Vec3

Definition at line 45 of file DDEcalBarrelNewAlgo.cc.

Constructor & Destructor Documentation

◆ DDEcalBarrelNewAlgo()

DDEcalBarrelNewAlgo::DDEcalBarrelNewAlgo ( )

Definition at line 806 of file DDEcalBarrelNewAlgo.cc.

     : m_idNameSpace(""),
       m_BarName(""),
       m_BarMat(""),
       m_vecBarZPts(),
       m_vecBarRMin(),
       m_vecBarRMax(),
       m_vecBarTran(),
       m_vecBarRota(),
       m_vecBarRota2(),
       m_vecBarRota3(),
       m_BarPhiLo(0),
       m_BarPhiHi(0),
       m_BarHere(0),
       m_SpmName(""),
       m_SpmMat(""),
       m_vecSpmZPts(),
       m_vecSpmRMin(),
       m_vecSpmRMax(),
       m_vecSpmTran(),
       m_vecSpmRota(),
       m_vecSpmBTran(),
       m_vecSpmBRota(),
       m_SpmNPerHalf(0),
       m_SpmLowPhi(0),
       m_SpmDelPhi(0),
       m_SpmPhiOff(0),
       m_vecSpmHere(),
       m_SpmCutName(""),
       m_SpmCutThick(0),
       m_SpmCutShow(0),
       m_vecSpmCutTM(),
       m_vecSpmCutTP(),
       m_SpmCutRM(0),
       m_SpmCutRP(0),
       m_SpmExpThick(0),
       m_SpmExpWide(0),
       m_SpmExpYOff(0),
       m_SpmSideName(""),
       m_SpmSideMat(""),
       m_SpmSideHigh(0),
       m_SpmSideThick(0),
       m_SpmSideYOffM(0),
       m_SpmSideYOffP(0),
       m_NomCryDimAF(0),
       m_NomCryDimLZ(0),
       m_vecNomCryDimBF(),
       m_vecNomCryDimCF(),
       m_vecNomCryDimAR(),
       m_vecNomCryDimBR(),
       m_vecNomCryDimCR(),
       m_UnderAF(0),
       m_UnderLZ(0),
       m_UnderBF(0),
       m_UnderCF(0),
       m_UnderAR(0),
       m_UnderBR(0),
       m_UnderCR(0),
       m_WallThAlv(0),
       m_WrapThAlv(0),
       m_ClrThAlv(0),
       m_vecGapAlvEta(),
       m_WallFrAlv(0),
       m_WrapFrAlv(0),
       m_ClrFrAlv(0),
       m_WallReAlv(0),
       m_WrapReAlv(0),
       m_ClrReAlv(0),
       m_NCryTypes(0),
       m_NCryPerAlvEta(0),
       m_CryName(""),
       m_ClrName(""),
       m_WrapName(""),
       m_WallName(""),
       m_CryMat(""),
       m_ClrMat(""),
       m_WrapMat(""),
       m_WallMat(""),
 
       m_capName(""),
       m_capHere(0),
       m_capMat(""),
       m_capXSize(0),
       m_capYSize(0),
       m_capThick(0),
 
       m_CERName(""),
       m_CERMat(""),
       m_CERXSize(0),
       m_CERYSize(0),
       m_CERThick(0),
 
       m_BSiName(""),
       m_BSiMat(""),
       m_BSiXSize(0),
       m_BSiYSize(0),
       m_BSiThick(0),
 
       m_APDName(""),
       m_APDMat(""),
       m_APDSide(0),
       m_APDThick(0),
       m_APDZ(0),
       m_APDX1(0),
       m_APDX2(0),
 
       m_ATJName(""),
       m_ATJMat(""),
       m_ATJThick(0),
 
       m_SGLName(""),
       m_SGLMat(""),
       m_SGLThick(0),
 
       m_AGLName(""),
       m_AGLMat(""),
       m_AGLThick(0),
 
       m_ANDName(""),
       m_ANDMat(""),
       m_ANDThick(0),
 
       m_WebHere(0),
       m_WebPlName(""),
       m_WebClrName(""),
       m_WebPlMat(""),
       m_WebClrMat(""),
       m_vecWebPlTh(),
       m_vecWebClrTh(),
       m_vecWebLength(),
       m_IlyHere(0),
       m_IlyName(),
       m_IlyPhiLow(0),
       m_IlyDelPhi(0),
       m_vecIlyMat(),
       m_vecIlyThick(),
       m_IlyPipeName(""),
       m_IlyPipeHere(0),
       m_IlyPipeMat(""),
       m_IlyPipeOD(0),
       m_IlyPipeID(0),
       m_vecIlyPipeLength(),
       m_vecIlyPipeType(),
       m_vecIlyPipePhi(),
       m_vecIlyPipeZ(),
       m_IlyPTMName(""),
       m_IlyPTMHere(0),
       m_IlyPTMMat(""),
       m_IlyPTMWidth(0),
       m_IlyPTMLength(0),
       m_IlyPTMHeight(0),
       m_vecIlyPTMZ(),
       m_vecIlyPTMPhi(),
       m_IlyFanOutName(""),
       m_IlyFanOutHere(0),
       m_IlyFanOutMat(""),
       m_IlyFanOutWidth(0),
       m_IlyFanOutLength(0),
       m_IlyFanOutHeight(0),
       m_vecIlyFanOutZ(),
       m_vecIlyFanOutPhi(),
       m_IlyDiffName(""),
       m_IlyDiffMat(""),
       m_IlyDiffOff(0),
       m_IlyDiffLength(0),
       m_IlyBndlName(""),
       m_IlyBndlMat(""),
       m_IlyBndlOff(0),
       m_IlyBndlLength(0),
       m_IlyFEMName(""),
       m_IlyFEMMat(""),
       m_IlyFEMWidth(0),
       m_IlyFEMLength(0),
       m_IlyFEMHeight(0),
       m_vecIlyFEMZ(),
       m_vecIlyFEMPhi(),
       m_HawRName(""),
       m_FawName(""),
       m_FawHere(0),
       m_HawRHBIG(0),
       m_HawRhsml(0),
       m_HawRCutY(0),
       m_HawRCutZ(0),
       m_HawRCutDelY(0),
       m_HawYOffCry(0),
       m_NFawPerSupm(0),
       m_FawPhiOff(0),
       m_FawDelPhi(0),
       m_FawPhiRot(0),
       m_FawRadOff(0),
       m_GridHere(0),
       m_GridName(""),
       m_GridMat(""),
       m_GridThick(0),
       m_BackXOff(0),
       m_BackYOff(0),
       m_BackHere(0),
       m_BackSideName(""),
       m_BackSideHere(0),
       m_BackSideLength(0),
       m_BackSideHeight(0),
       m_BackSideWidth(0),
       m_BackSideYOff1(0),
       m_BackSideYOff2(0),
       m_BackSideAngle(0),
       m_BackSideMat(""),
       m_BackPlateName(""),
       m_BackPlateHere(0),
       m_BackPlateLength(0),
       m_BackPlateThick(0),
       m_BackPlateWidth(0),
       m_BackPlateMat(""),
       m_BackPlate2Name(""),
       m_BackPlate2Thick(0),
       m_BackPlate2Mat(""),
       m_GrilleName(""),
       m_GrilleHere(0),
       m_GrilleThick(0),
       m_GrilleWidth(0),
       m_GrilleZSpace(0),
       m_GrilleMat(""),
       m_vecGrilleHeight(),
       m_vecGrilleZOff(),
       m_GrEdgeSlotName(""),
       m_GrEdgeSlotMat(""),
       m_GrEdgeSlotHere(0),
       m_GrEdgeSlotHeight(0),
       m_GrEdgeSlotWidth(0),
       m_GrMidSlotName(""),
       m_GrMidSlotMat(""),
       m_GrMidSlotHere(0),
       m_GrMidSlotWidth(0),
       m_GrMidSlotXOff(0),
       m_vecGrMidSlotHeight(),
       m_BackPipeHere(0),
       m_BackPipeName(""),
       m_vecBackPipeDiam(),
       m_vecBackPipeThick(),
       m_BackPipeMat(""),
       m_BackPipeWaterMat(""),
 
       m_vecBackCoolName(),
       m_BackCoolHere(0),
       m_BackCoolBarHere(0),
       m_BackCoolBarWidth(0),
       m_BackCoolBarHeight(0),
       m_BackCoolMat(""),
       m_BackCoolBarName(""),
       m_BackCoolBarThick(0),
       m_BackCoolBarMat(""),
       m_BackCoolBarSSName(""),
       m_BackCoolBarSSThick(0),
       m_BackCoolBarSSMat(""),
       m_BackCoolBarWaName(""),
       m_BackCoolBarWaThick(0),
       m_BackCoolBarWaMat(""),
       m_BackCoolVFEHere(0),
       m_BackCoolVFEName(""),
       m_BackCoolVFEMat(""),
       m_BackVFEName(""),
       m_BackVFEMat(""),
       m_vecBackVFELyrThick(),
       m_vecBackVFELyrName(),
       m_vecBackVFELyrMat(),
       m_vecBackCoolNSec(),
       m_vecBackCoolSecSep(),
       m_vecBackCoolNPerSec(),
 
       m_BackMiscHere(0),
       m_vecBackMiscThick(),
       m_vecBackMiscName(),
       m_vecBackMiscMat(),
       m_BackCBStdSep(0),
       m_PatchPanelHere(0),
       m_PatchPanelName(""),
       m_vecPatchPanelThick(),
       m_vecPatchPanelNames(),
       m_vecPatchPanelMat(),
       m_BackCoolTankHere(0),
       m_BackCoolTankName(""),
       m_BackCoolTankWidth(0),
       m_BackCoolTankThick(0),
       m_BackCoolTankMat(""),
       m_BackCoolTankWaName(""),
       m_BackCoolTankWaWidth(0),
       m_BackCoolTankWaMat(""),
       m_BackBracketName(""),
       m_BackBracketHeight(0),
       m_BackBracketMat(""),
 
       m_DryAirTubeHere(0),
       m_DryAirTubeName(""),
       m_MBCoolTubeNum(0),
       m_DryAirTubeInnDiam(0),
       m_DryAirTubeOutDiam(0),
       m_DryAirTubeMat(""),
       m_MBCoolTubeHere(0),
       m_MBCoolTubeName(""),
       m_MBCoolTubeInnDiam(0),
       m_MBCoolTubeOutDiam(0),
       m_MBCoolTubeMat(""),
       m_MBManifHere(0),
       m_MBManifName(""),
       m_MBManifInnDiam(0),
       m_MBManifOutDiam(0),
       m_MBManifMat(""),
       m_MBLyrHere(0),
       m_vecMBLyrThick(0),
       m_vecMBLyrName(),
       m_vecMBLyrMat(),
 
       m_PincerRodHere(0),
       m_PincerRodName(""),
       m_PincerRodMat(""),
       m_vecPincerRodAzimuth(),
       m_PincerEnvName(""),
       m_PincerEnvMat(""),
       m_PincerEnvWidth(0),
       m_PincerEnvHeight(0),
       m_PincerEnvLength(0),
       m_vecPincerEnvZOff(),
       m_PincerBlkName(""),
       m_PincerBlkMat(""),
       m_PincerBlkLength(0),
       m_PincerShim1Name(""),
       m_PincerShimHeight(0),
       m_PincerShim2Name(""),
       m_PincerShimMat(""),
       m_PincerShim1Width(0),
       m_PincerShim2Width(0),
       m_PincerCutName(""),
       m_PincerCutMat(""),
       m_PincerCutWidth(0),
       m_PincerCutHeight(0)
 
 {
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("EcalGeom") << "DDEcalBarrelAlgo info: Creating an instance";
 #endif
 }

◆ ~DDEcalBarrelNewAlgo()

double m_AGLThick

Definition: DDEcalBarrelNewAlgo.cc:565

◆ andMat()

DDMaterial DDEcalBarrelNewAlgo::andMat ( ) const

inline

Definition at line 184 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_ANDMat.

Referenced by execute().

184 { return ddmat(m_ANDMat); }

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

DDEcalBarrelNewAlgo::m_ANDMat

std::string m_ANDMat

Definition: DDEcalBarrelNewAlgo.cc:568

◆ andName()

DDName DDEcalBarrelNewAlgo::andName ( ) const

inline

Definition at line 183 of file DDEcalBarrelNewAlgo.cc.

References ddname(), and m_ANDName.

Referenced by execute().

183 { return ddname(m_ANDName); }

DDEcalBarrelNewAlgo::ddname

DDName ddname(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3738

DDEcalBarrelNewAlgo::m_ANDName

double DDEcalBarrelNewAlgo::apdSide ( ) const

inline

Definition at line 189 of file DDEcalBarrelNewAlgo.cc.

References m_APDSide.

Referenced by execute().

189 { return m_APDSide; }

DDEcalBarrelNewAlgo::m_APDSide

double m_APDSide

Definition: DDEcalBarrelNewAlgo.cc:549

◆ apdThick()

double DDEcalBarrelNewAlgo::apdThick ( ) const

inline

Definition at line 190 of file DDEcalBarrelNewAlgo.cc.

References m_APDThick.

Referenced by execute().

190 { return m_APDThick; }

DDEcalBarrelNewAlgo::m_APDThick

double m_APDThick

Definition: DDEcalBarrelNewAlgo.cc:550

◆ apdX1()

double DDEcalBarrelNewAlgo::apdX1 ( ) const

inline

Definition at line 192 of file DDEcalBarrelNewAlgo.cc.

References m_APDX1.

Referenced by execute().

192 { return m_APDX1; }

DDEcalBarrelNewAlgo::m_APDX1

double m_APDX1

Definition: DDEcalBarrelNewAlgo.cc:552

◆ apdX2()

double DDEcalBarrelNewAlgo::apdX2 ( ) const

inline

Definition at line 193 of file DDEcalBarrelNewAlgo.cc.

References m_APDX2.

Referenced by execute().

193 { return m_APDX2; }

DDEcalBarrelNewAlgo::m_APDX2

double DDEcalBarrelNewAlgo::atjThick ( ) const

inline

Definition at line 173 of file DDEcalBarrelNewAlgo.cc.

References m_ATJThick.

Referenced by execute().

173 { return m_ATJThick; }

DDEcalBarrelNewAlgo::m_ATJThick

double m_ATJThick

Definition: DDEcalBarrelNewAlgo.cc:557

◆ backBracketHeight()

double DDEcalBarrelNewAlgo::backBracketHeight ( ) const

inline

Definition at line 370 of file DDEcalBarrelNewAlgo.cc.

References m_BackBracketHeight.

Referenced by execute().

370 { return m_BackBracketHeight; }

DDEcalBarrelNewAlgo::m_BackBracketHeight

double m_BackBracketHeight

Definition: DDEcalBarrelNewAlgo.cc:748

◆ backBracketMat()

DDMaterial DDEcalBarrelNewAlgo::backBracketMat ( ) const

inline

Definition at line 371 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_BackBracketMat.

Referenced by execute().

371 { return ddmat(m_BackBracketMat); }

DDEcalBarrelNewAlgo::m_BackBracketMat

std::string m_BackBracketMat

Definition: DDEcalBarrelNewAlgo.cc:749

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

◆ backBracketName()

const std::string& DDEcalBarrelNewAlgo::backBracketName ( ) const

inline

Definition at line 369 of file DDEcalBarrelNewAlgo.cc.

References m_BackBracketName.

Referenced by execute().

369 { return m_BackBracketName; }

DDEcalBarrelNewAlgo::m_BackBracketName

std::string m_BackBracketName

Definition: DDEcalBarrelNewAlgo.cc:747

◆ backCBStdSep()

double DDEcalBarrelNewAlgo::backCBStdSep ( ) const

inline

Definition at line 359 of file DDEcalBarrelNewAlgo.cc.

References m_BackCBStdSep.

Referenced by execute().

359 { return m_BackCBStdSep; }

DDEcalBarrelNewAlgo::m_BackCBStdSep

double m_BackCBStdSep

Definition: DDEcalBarrelNewAlgo.cc:731

◆ backCoolBarHeight()

double DDEcalBarrelNewAlgo::backCoolBarHeight ( ) const

inline

Definition at line 336 of file DDEcalBarrelNewAlgo.cc.

References m_BackCoolBarHeight.

Referenced by execute().

336 { return m_BackCoolBarHeight; }

DDEcalBarrelNewAlgo::m_BackCoolBarHeight

double DDEcalBarrelNewAlgo::backCoolBarSSThick ( ) const

inline

Definition at line 343 of file DDEcalBarrelNewAlgo.cc.

References m_BackCoolBarSSThick.

Referenced by execute().

343 { return m_BackCoolBarSSThick; }

DDEcalBarrelNewAlgo::m_BackCoolBarSSThick

double DDEcalBarrelNewAlgo::backCoolBarWaThick ( ) const

inline

Definition at line 346 of file DDEcalBarrelNewAlgo.cc.

References m_BackCoolBarWaThick.

Referenced by execute().

346 { return m_BackCoolBarWaThick; }

DDEcalBarrelNewAlgo::m_BackCoolBarWaThick

double m_BackCoolBarWaThick

Definition: DDEcalBarrelNewAlgo.cc:714

◆ backCoolBarWidth()

double DDEcalBarrelNewAlgo::backCoolBarWidth ( ) const

inline

Definition at line 335 of file DDEcalBarrelNewAlgo.cc.

References m_BackCoolBarWidth.

Referenced by execute().

335 { return m_BackCoolBarWidth; }

DDEcalBarrelNewAlgo::m_BackCoolBarWidth

double m_BackCoolBarWidth

Definition: DDEcalBarrelNewAlgo.cc:704

◆ backCoolHere()

double DDEcalBarrelNewAlgo::backCoolHere ( ) const

inline

Definition at line 334 of file DDEcalBarrelNewAlgo.cc.

References m_BackCoolHere.

Referenced by execute().

334 { return m_BackCoolHere; }

DDEcalBarrelNewAlgo::m_BackCoolHere

double m_BackCoolHere

Definition: DDEcalBarrelNewAlgo.cc:702

◆ backCoolMat()

DDMaterial DDEcalBarrelNewAlgo::backCoolMat ( ) const

inline

Definition at line 337 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_BackCoolMat.

337 { return ddmat(m_BackCoolMat); }

DDEcalBarrelNewAlgo::m_BackCoolMat

std::string m_BackCoolMat

Definition: DDEcalBarrelNewAlgo.cc:706

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

◆ backCoolTankHere()

double DDEcalBarrelNewAlgo::backCoolTankHere ( ) const

inline

Definition at line 361 of file DDEcalBarrelNewAlgo.cc.

References m_BackCoolTankHere.

Referenced by execute().

361 { return m_BackCoolTankHere; }

DDEcalBarrelNewAlgo::m_BackCoolTankHere

double m_BackCoolTankHere

Definition: DDEcalBarrelNewAlgo.cc:739

◆ backCoolTankMat()

DDMaterial DDEcalBarrelNewAlgo::backCoolTankMat ( ) const

inline

Definition at line 365 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_BackCoolTankMat.

Referenced by execute().

365 { return ddmat(m_BackCoolTankMat); }

DDEcalBarrelNewAlgo::m_BackCoolTankMat

std::string m_BackCoolTankMat

Definition: DDEcalBarrelNewAlgo.cc:743

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

◆ backCoolTankName()

const std::string& DDEcalBarrelNewAlgo::backCoolTankName ( ) const

inline

Definition at line 362 of file DDEcalBarrelNewAlgo.cc.

References m_BackCoolTankName.

Referenced by execute().

362 { return m_BackCoolTankName; }

DDEcalBarrelNewAlgo::m_BackCoolTankName

std::string m_BackCoolTankName

Definition: DDEcalBarrelNewAlgo.cc:740

◆ backCoolTankThick()

double DDEcalBarrelNewAlgo::backCoolTankThick ( ) const

inline

Definition at line 364 of file DDEcalBarrelNewAlgo.cc.

References m_BackCoolTankThick.

Referenced by execute().

364 { return m_BackCoolTankThick; }

DDEcalBarrelNewAlgo::m_BackCoolTankThick

double m_BackCoolTankThick

Definition: DDEcalBarrelNewAlgo.cc:742

◆ backCoolTankWaMat()

DDMaterial DDEcalBarrelNewAlgo::backCoolTankWaMat ( ) const

inline

Definition at line 368 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_BackCoolTankWaMat.

Referenced by execute().

368 { return ddmat(m_BackCoolTankWaMat); }

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

DDEcalBarrelNewAlgo::m_BackCoolTankWaMat

std::string m_BackCoolTankWaMat

Definition: DDEcalBarrelNewAlgo.cc:746

◆ backCoolTankWaName()

const std::string& DDEcalBarrelNewAlgo::backCoolTankWaName ( ) const

inline

Definition at line 366 of file DDEcalBarrelNewAlgo.cc.

References m_BackCoolTankWaName.

Referenced by execute().

366 { return m_BackCoolTankWaName; }

DDEcalBarrelNewAlgo::m_BackCoolTankWaName

std::string m_BackCoolTankWaName

Definition: DDEcalBarrelNewAlgo.cc:744

◆ backCoolTankWaWidth()

double DDEcalBarrelNewAlgo::backCoolTankWaWidth ( ) const

inline

Definition at line 367 of file DDEcalBarrelNewAlgo.cc.

References m_BackCoolTankWaWidth.

Referenced by execute().

367 { return m_BackCoolTankWaWidth; }

DDEcalBarrelNewAlgo::m_BackCoolTankWaWidth

double m_BackCoolTankWaWidth

Definition: DDEcalBarrelNewAlgo.cc:745

◆ backCoolTankWidth()

double DDEcalBarrelNewAlgo::backCoolTankWidth ( ) const

inline

Definition at line 363 of file DDEcalBarrelNewAlgo.cc.

References m_BackCoolTankWidth.

Referenced by execute().

363 { return m_BackCoolTankWidth; }

DDEcalBarrelNewAlgo::m_BackCoolTankWidth

double DDEcalBarrelNewAlgo::backHere ( ) const

inline

Definition at line 275 of file DDEcalBarrelNewAlgo.cc.

References m_BackHere.

Referenced by execute().

275 { return m_BackHere; }

DDEcalBarrelNewAlgo::m_BackHere

double m_BackHere

Definition: DDEcalBarrelNewAlgo.cc:653

◆ backMiscHere()

double DDEcalBarrelNewAlgo::backMiscHere ( ) const

inline

Definition at line 323 of file DDEcalBarrelNewAlgo.cc.

References m_BackMiscHere.

Referenced by execute().

323 { return m_BackMiscHere; }

DDEcalBarrelNewAlgo::m_BackMiscHere

double m_BackMiscHere

Definition: DDEcalBarrelNewAlgo.cc:727

◆ backPipeHere()

double DDEcalBarrelNewAlgo::backPipeHere ( ) const

inline

Definition at line 317 of file DDEcalBarrelNewAlgo.cc.

References m_BackPipeHere.

Referenced by execute().

317 { return m_BackPipeHere; }

DDEcalBarrelNewAlgo::m_BackPipeHere

double m_BackPipeHere

Definition: DDEcalBarrelNewAlgo.cc:694

◆ backPipeMat()

DDMaterial DDEcalBarrelNewAlgo::backPipeMat ( ) const

inline

Definition at line 321 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_BackPipeMat.

Referenced by execute().

321 { return ddmat(m_BackPipeMat); }

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

DDEcalBarrelNewAlgo::m_BackPipeMat

double DDEcalBarrelNewAlgo::backPlate2Thick ( ) const

inline

Definition at line 294 of file DDEcalBarrelNewAlgo.cc.

References m_BackPlate2Thick.

Referenced by execute().

294 { return m_BackPlate2Thick; }

DDEcalBarrelNewAlgo::m_BackPlate2Thick

double m_BackPlate2Thick

Definition: DDEcalBarrelNewAlgo.cc:670

◆ backPlateHere()

double DDEcalBarrelNewAlgo::backPlateHere ( ) const

inline

Definition at line 288 of file DDEcalBarrelNewAlgo.cc.

References m_BackPlateHere.

Referenced by execute().

288 { return m_BackPlateHere; }

DDEcalBarrelNewAlgo::m_BackPlateHere

double DDEcalBarrelNewAlgo::backPlateThick ( ) const

inline

Definition at line 290 of file DDEcalBarrelNewAlgo.cc.

References m_BackPlateThick.

Referenced by execute().

290 { return m_BackPlateThick; }

DDEcalBarrelNewAlgo::m_BackPlateThick

double m_BackPlateThick

Definition: DDEcalBarrelNewAlgo.cc:666

◆ backPlateWidth()

double DDEcalBarrelNewAlgo::backPlateWidth ( ) const

inline

Definition at line 291 of file DDEcalBarrelNewAlgo.cc.

References m_BackPlateWidth.

Referenced by execute().

291 { return m_BackPlateWidth; }

DDEcalBarrelNewAlgo::m_BackPlateWidth

double m_BackPlateWidth

Definition: DDEcalBarrelNewAlgo.cc:667

◆ backSideAngle()

double DDEcalBarrelNewAlgo::backSideAngle ( ) const

inline

Definition at line 285 of file DDEcalBarrelNewAlgo.cc.

References m_BackSideAngle.

Referenced by execute().

285 { return m_BackSideAngle; }

DDEcalBarrelNewAlgo::m_BackSideAngle

double m_BackSideAngle

Definition: DDEcalBarrelNewAlgo.cc:661

◆ backSideHeight()

double DDEcalBarrelNewAlgo::backSideHeight ( ) const

inline

Definition at line 281 of file DDEcalBarrelNewAlgo.cc.

References m_BackSideHeight.

Referenced by execute().

281 { return m_BackSideHeight; }

DDEcalBarrelNewAlgo::m_BackSideHeight

double m_BackSideHeight

Definition: DDEcalBarrelNewAlgo.cc:657

◆ backSideHere()

double DDEcalBarrelNewAlgo::backSideHere ( ) const

inline

Definition at line 279 of file DDEcalBarrelNewAlgo.cc.

References m_BackSideHere.

Referenced by execute().

279 { return m_BackSideHere; }

DDEcalBarrelNewAlgo::m_BackSideHere

double DDEcalBarrelNewAlgo::backSideWidth ( ) const

inline

Definition at line 282 of file DDEcalBarrelNewAlgo.cc.

References m_BackSideWidth.

Referenced by execute().

282 { return m_BackSideWidth; }

DDEcalBarrelNewAlgo::m_BackSideWidth

double m_BackSideWidth

Definition: DDEcalBarrelNewAlgo.cc:658

◆ backSideYOff1()

double DDEcalBarrelNewAlgo::backSideYOff1 ( ) const

inline

Definition at line 283 of file DDEcalBarrelNewAlgo.cc.

References m_BackSideYOff1.

Referenced by execute().

283 { return m_BackSideYOff1; }

DDEcalBarrelNewAlgo::m_BackSideYOff1

double DDEcalBarrelNewAlgo::backXOff ( ) const

inline

Definition at line 276 of file DDEcalBarrelNewAlgo.cc.

References m_BackXOff.

Referenced by execute().

276 { return m_BackXOff; }

DDEcalBarrelNewAlgo::m_BackXOff

double m_BackXOff

Definition: DDEcalBarrelNewAlgo.cc:650

◆ backYOff()

double DDEcalBarrelNewAlgo::backYOff ( ) const

inline

Definition at line 277 of file DDEcalBarrelNewAlgo.cc.

References m_BackYOff.

Referenced by execute().

277 { return m_BackYOff; }

DDEcalBarrelNewAlgo::m_BackYOff

double DDEcalBarrelNewAlgo::barPhiHi ( ) const

inline

Definition at line 77 of file DDEcalBarrelNewAlgo.cc.

References m_BarPhiHi.

Referenced by execute().

77 { return m_BarPhiHi; }

DDEcalBarrelNewAlgo::m_BarPhiHi

double DDEcalBarrelNewAlgo::bsiThick ( ) const

inline

Definition at line 169 of file DDEcalBarrelNewAlgo.cc.

References m_BSiThick.

Referenced by execute().

169 { return m_BSiThick; }

DDEcalBarrelNewAlgo::m_BSiThick

double m_BSiThick

Definition: DDEcalBarrelNewAlgo.cc:545

◆ bsiXSize()

double DDEcalBarrelNewAlgo::bsiXSize ( ) const

inline

Definition at line 167 of file DDEcalBarrelNewAlgo.cc.

References m_BSiXSize.

Referenced by execute().

167 { return m_BSiXSize; }

DDEcalBarrelNewAlgo::m_BSiXSize

double m_BSiXSize

Definition: DDEcalBarrelNewAlgo.cc:543

◆ bsiYSize()

double DDEcalBarrelNewAlgo::bsiYSize ( ) const

inline

Definition at line 168 of file DDEcalBarrelNewAlgo.cc.

References m_BSiYSize.

Referenced by execute().

168 { return m_BSiYSize; }

DDEcalBarrelNewAlgo::m_BSiYSize

double DDEcalBarrelNewAlgo::capThick ( ) const

inline

Definition at line 157 of file DDEcalBarrelNewAlgo.cc.

References m_capThick.

Referenced by execute().

157 { return m_capThick; }

DDEcalBarrelNewAlgo::m_capThick

double m_capThick

Definition: DDEcalBarrelNewAlgo.cc:533

◆ capXSize()

double DDEcalBarrelNewAlgo::capXSize ( ) const

inline

Definition at line 155 of file DDEcalBarrelNewAlgo.cc.

References m_capXSize.

Referenced by execute().

155 { return m_capXSize; }

DDEcalBarrelNewAlgo::m_capXSize

double DDEcalBarrelNewAlgo::cerThick ( ) const

inline

Definition at line 163 of file DDEcalBarrelNewAlgo.cc.

References m_CERThick.

Referenced by execute().

163 { return m_CERThick; }

DDEcalBarrelNewAlgo::m_CERThick

double m_CERThick

Definition: DDEcalBarrelNewAlgo.cc:539

◆ cerXSize()

double DDEcalBarrelNewAlgo::cerXSize ( ) const

inline

Definition at line 161 of file DDEcalBarrelNewAlgo.cc.

References m_CERXSize.

Referenced by execute().

161 { return m_CERXSize; }

DDEcalBarrelNewAlgo::m_CERXSize

double m_CERXSize

Definition: DDEcalBarrelNewAlgo.cc:537

◆ cerYSize()

double DDEcalBarrelNewAlgo::cerYSize ( ) const

inline

Definition at line 162 of file DDEcalBarrelNewAlgo.cc.

References m_CERYSize.

Referenced by execute().

162 { return m_CERYSize; }

DDEcalBarrelNewAlgo::m_CERYSize

double m_CERYSize

Definition: DDEcalBarrelNewAlgo.cc:538

◆ clrFrAlv()

double DDEcalBarrelNewAlgo::clrFrAlv ( ) const

inline

Definition at line 134 of file DDEcalBarrelNewAlgo.cc.

References m_ClrFrAlv.

Referenced by execute().

134 { return m_ClrFrAlv; }

DDEcalBarrelNewAlgo::m_ClrFrAlv

double m_ClrFrAlv

Definition: DDEcalBarrelNewAlgo.cc:509

◆ clrMat()

DDMaterial DDEcalBarrelNewAlgo::clrMat ( ) const

inline

Definition at line 149 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_ClrMat.

Referenced by execute().

149 { return ddmat(m_ClrMat); }

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

DDEcalBarrelNewAlgo::m_ClrMat

std::string m_ClrMat

Definition: DDEcalBarrelNewAlgo.cc:524

◆ clrName()

const std::string& DDEcalBarrelNewAlgo::clrName ( ) const

inline

Definition at line 144 of file DDEcalBarrelNewAlgo.cc.

References m_ClrName.

Referenced by execute().

144 { return m_ClrName; }

DDEcalBarrelNewAlgo::m_ClrName

std::string m_ClrName

Definition: DDEcalBarrelNewAlgo.cc:519

◆ clrReAlv()

double DDEcalBarrelNewAlgo::clrReAlv ( ) const

inline

Definition at line 138 of file DDEcalBarrelNewAlgo.cc.

References m_ClrReAlv.

Referenced by execute().

138 { return m_ClrReAlv; }

DDEcalBarrelNewAlgo::m_ClrReAlv

double m_ClrReAlv

Definition: DDEcalBarrelNewAlgo.cc:513

◆ clrThAlv()

double DDEcalBarrelNewAlgo::clrThAlv ( ) const

inline

Definition at line 129 of file DDEcalBarrelNewAlgo.cc.

References m_ClrThAlv.

Referenced by execute().

129 { return m_ClrThAlv; }

DDEcalBarrelNewAlgo::m_ClrThAlv

double m_ClrThAlv

Definition: DDEcalBarrelNewAlgo.cc:504

◆ cryMat()

DDMaterial DDEcalBarrelNewAlgo::cryMat ( ) const

inline

Definition at line 148 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_CryMat.

Referenced by execute().

148 { return ddmat(m_CryMat); }

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

DDEcalBarrelNewAlgo::m_CryMat

std::string m_CryMat

Definition: DDEcalBarrelNewAlgo.cc:523

◆ cryName()

const std::string& DDEcalBarrelNewAlgo::cryName ( ) const

inline

Definition at line 143 of file DDEcalBarrelNewAlgo.cc.

References m_CryName.

Referenced by execute().

143 { return m_CryName; }

DDEcalBarrelNewAlgo::m_CryName

std::string m_CryName

Definition: DDEcalBarrelNewAlgo.cc:518

◆ ddmat()

DDMaterial DDEcalBarrelNewAlgo::ddmat ( const std::string & s ) const

Definition at line 3736 of file DDEcalBarrelNewAlgo.cc.

References ddname(), and alignCSCRings::s.

Referenced by aglMat(), andMat(), apdMat(), atjMat(), backBracketMat(), backCoolBarMat(), backCoolBarSSMat(), backCoolBarWaMat(), backCoolMat(), backCoolTankMat(), backCoolTankWaMat(), backCoolVFEMat(), backPipeMat(), backPipeWaterMat(), backPlate2Mat(), backPlateMat(), backSideMat(), backVFEMat(), barMat(), bsiMat(), capMat(), cerMat(), clrMat(), cryMat(), dryAirTubeMat(), execute(), grEdgeSlotMat(), gridMat(), grilleMat(), grMidSlotMat(), ilyBndlMat(), ilyDiffMat(), ilyFanOutMat(), ilyFEMMat(), ilyPipeMat(), ilyPTMMat(), mBCoolTubeMat(), mBManifMat(), pincerBlkMat(), pincerCutMat(), pincerEnvMat(), pincerRodMat(), pincerShimMat(), sglMat(), spmMat(), spmSideMat(), wallMat(), webClrMat(), webPlMat(), and wrapMat().

3736 { return DDMaterial(ddname(s)); }

DDMaterial

DDMaterial is used to define and access material information.

Definition: DDMaterial.h:45

alignCSCRings.s

s

Definition: alignCSCRings.py:92

DDEcalBarrelNewAlgo::ddname

DDName ddname(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3738

◆ ddname()

DDName DDEcalBarrelNewAlgo::ddname ( const std::string & s ) const

Definition at line 3738 of file DDEcalBarrelNewAlgo.cc.

References DDSplit(), m_idNameSpace, alignCSCRings::s, and groupFilesInBlocks::temp.

Referenced by aglName(), andName(), apdName(), atjName(), backCoolBarName(), backCoolBarSSName(), backCoolBarWaName(), backCoolVFEName(), backPlate2Name(), backPlateName(), backSideName(), backVFEName(), barName(), bsiName(), capName(), cerName(), ddmat(), execute(), fawName(), grEdgeSlotName(), gridName(), hawRName(), ilyBndlName(), ilyDiffName(), ilyFanOutName(), ilyFEMName(), ilyPTMName(), mBManifName(), myrot(), mytrap(), patchPanelName(), pincerBlkName(), pincerCutName(), pincerEnvName(), pincerRodName(), pincerShim1Name(), pincerShim2Name(), sglName(), spmCutName(), spmName(), and spmSideName().

                                                            {
   const pair<std::string, std::string> temp(DDSplit(s));
   if (temp.second.empty()) {
     return DDName(temp.first, m_idNameSpace);
   } else {
     return DDName(temp.first, temp.second);
   }
 }

◆ dryAirTubeHere()

double DDEcalBarrelNewAlgo::dryAirTubeHere ( ) const

inline

Definition at line 373 of file DDEcalBarrelNewAlgo.cc.

References m_DryAirTubeHere.

Referenced by execute().

373 { return m_DryAirTubeHere; }

DDEcalBarrelNewAlgo::m_DryAirTubeHere

double m_DryAirTubeHere

Definition: DDEcalBarrelNewAlgo.cc:751

◆ dryAirTubeInnDiam()

double DDEcalBarrelNewAlgo::dryAirTubeInnDiam ( ) const

inline

Definition at line 376 of file DDEcalBarrelNewAlgo.cc.

References m_DryAirTubeInnDiam.

Referenced by execute().

376 { return m_DryAirTubeInnDiam; }

DDEcalBarrelNewAlgo::m_DryAirTubeInnDiam

double m_DryAirTubeInnDiam

Definition: DDEcalBarrelNewAlgo.cc:754

◆ dryAirTubeMat()

DDMaterial DDEcalBarrelNewAlgo::dryAirTubeMat ( ) const

inline

Definition at line 378 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_DryAirTubeMat.

Referenced by execute().

378 { return ddmat(m_DryAirTubeMat); }

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

DDEcalBarrelNewAlgo::m_DryAirTubeMat

std::string m_DryAirTubeMat

Definition: DDEcalBarrelNewAlgo.cc:756

◆ dryAirTubeName()

const std::string& DDEcalBarrelNewAlgo::dryAirTubeName ( ) const

inline

Definition at line 374 of file DDEcalBarrelNewAlgo.cc.

References m_DryAirTubeName.

Referenced by execute().

374 { return m_DryAirTubeName; }

DDEcalBarrelNewAlgo::m_DryAirTubeName

std::string m_DryAirTubeName

Definition: DDEcalBarrelNewAlgo.cc:752

◆ dryAirTubeOutDiam()

double DDEcalBarrelNewAlgo::dryAirTubeOutDiam ( ) const

inline

Definition at line 377 of file DDEcalBarrelNewAlgo.cc.

References m_DryAirTubeOutDiam.

Referenced by execute().

377 { return m_DryAirTubeOutDiam; }

DDEcalBarrelNewAlgo::m_DryAirTubeOutDiam

double m_DryAirTubeOutDiam

Definition: DDEcalBarrelNewAlgo.cc:755

◆ execute()

void DDEcalBarrelNewAlgo::execute ( DDCompactView & cpv )

override

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Back Cover Plate !!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Back Cover Plate !!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Back Side Plates !!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Back Side Plates !!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Mother Board Cooling Manifold Setup !!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Mother Board Cooling Manifold Setup !!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Loop over Grilles & MB Cooling Manifold !!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Loop over Grilles & MB Cooling Manifold !!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Cooling Bar Setup !!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Cooling Bar Setup !!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin VFE Card Setup !!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End VFE Card Setup !!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Cooling Bar + VFE Setup !!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Cooling Bar + VFE Setup !!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Placement of Readout & Cooling by Module !!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Back Water Pipes !!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Back Water Pipes !!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Placement of Cooling + VFE Cards !!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Placement of Cooling + VFE Cards !!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Placement of Readout & Cooling by Module !!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Patch Panel !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Patch Panel !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! Begin Pincers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! End Pincers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Definition at line 1523 of file DDEcalBarrelNewAlgo.cc.

                                                     {
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("EcalGeom") << "******** DDEcalBarrelAlgo execute!" << std::endl;
 #endif
   if (barHere() != 0) {
     const unsigned int copyOne(1);
     const unsigned int copyTwo(2);
     // Barrel parent volume----------------------------------------------------------
     cpv.position(
         DDLogicalPart(barName(),
                       barMat(),
                       DDSolidFactory::polycone(
                           barName(), barPhiLo(), (barPhiHi() - barPhiLo()), vecBarZPts(), vecBarRMin(), vecBarRMax())),
         parent().name(),
         copyOne,
         DDTranslation(vecBarTran()[0], vecBarTran()[1], vecBarTran()[2]),
         myrot(barName().name() + "Rot",
               Rota(Vec3(vecBarRota3()[0], vecBarRota3()[1], vecBarRota3()[2]), vecBarRota3()[3]) *
                   Rota(Vec3(vecBarRota2()[0], vecBarRota2()[1], vecBarRota2()[2]), vecBarRota2()[3]) *
                   Rota(Vec3(vecBarRota()[0], vecBarRota()[1], vecBarRota()[2]), vecBarRota()[3])));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeom") << barName() << " PolyCone from " << barPhiLo() / CLHEP::deg << " to "
                                << barPhiHi() / CLHEP::deg << " with " << vecBarZPts().size() << " points";
     for (unsigned int k = 0; k < vecBarZPts().size(); ++k)
       edm::LogVerbatim("EBGeom") << "[" << k << "] " << vecBarZPts()[k] << ":" << vecBarRMin()[k] << ":"
                                  << vecBarRMax()[k];
     edm::LogVerbatim("EBGeomX") << barName() << ":" << copyOne << " positioned in " << parent().name() << " at "
                                 << DDTranslation(vecBarTran()[0], vecBarTran()[1], vecBarTran()[2]) << " with rotation";
 #endif
     // End Barrel parent volume----------------------------------------------------------
 
     // Supermodule parent------------------------------------------------------------
 
     const DDName spmcut1ddname((0 != spmCutShow()) ? spmName() : ddname(m_SpmName + "CUT1"));
     const DDSolid ddspm(
         DDSolidFactory::polycone(spmcut1ddname, spmLowPhi(), spmDelPhi(), vecSpmZPts(), vecSpmRMin(), vecSpmRMax()));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeom") << spmcut1ddname << " PolyCone from " << spmLowPhi() / CLHEP::deg << " to "
                                << (spmLowPhi() + spmDelPhi()) / CLHEP::deg << " with " << vecSpmZPts().size()
                                << " points";
     for (unsigned int k = 0; k < vecSpmZPts().size(); ++k)
       edm::LogVerbatim("EBGeom") << "[" << k << "] " << vecSpmZPts()[k] << ":" << vecSpmRMin()[k] << ":"
                                  << vecSpmRMax()[k];
 #endif
 
     const unsigned int indx(vecSpmRMax().size() / 2);
 
     // Deal with the cut boxes first
     const DDSolid spmCutBox(DDSolidFactory::box(spmCutName(),
                                                 1.05 * (vecSpmRMax()[indx] - vecSpmRMin()[indx]) / 2.,
                                                 spmCutThick() / 2.,
                                                 fabs(vecSpmZPts().back() - vecSpmZPts().front()) / 2. + 1 * mm));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeom") << spmCutName() << " Box " << 1.05 * (vecSpmRMax()[indx] - vecSpmRMin()[indx]) / 2.
                                << ":" << spmCutThick() / 2. << ":"
                                << (fabs(vecSpmZPts().back() - vecSpmZPts().front()) / 2. + 1 * mm);
 #endif
     const std::vector<double>& cutBoxParms(spmCutBox.parameters());
     const DDLogicalPart spmCutLog(spmCutName(), spmMat(), spmCutBox);
     /*
     // Now the expansion box
     const double xExp(spmExpThick() / 2.);
     const double yExp(spmExpWide() / 2.);
     const double zExp(fabs(vecSpmZPts().back() - vecSpmZPts().front()) / 2.);
     const DDName expName(m_SpmName + "EXP");
     const DDSolid spmExpBox(DDSolidFactory::box(expName, xExp, yExp, zExp));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeom") << expName << " Box " << xExp << ":" << yExp << ":" << zExp;
 #endif
     const DDTranslation expTra(vecSpmRMax().back() - xExp, spmExpYOff(), vecSpmZPts().front() + zExp);
     const DDLogicalPart expLog(expName, spmMat(), spmExpBox);
 
     const DDName unionName ( ddname( m_SpmName + "UNI" ) ) ;
       if( 0 != spmCutShow() )
       {
      cpv.position( expLog, spmName(), copyOne, expTra, DDRotation() ) ;
       }
       else
       {
      const DDSolid unionSolid ( DDSolidFactory::unionSolid(
                        unionName,
                        spmcut1ddname, expName,
                        expTra, DDRotation() ) ) ;
                        }
     */
 
     // Supermodule side platess
     const DDSolid sideSolid(DDSolidFactory::box(
         spmSideName(), spmSideHigh() / 2., spmSideThick() / 2., fabs(vecSpmZPts()[1] - vecSpmZPts()[0]) / 2.));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeom") << spmSideName() << " Box " << spmSideHigh() / 2. << ":" << spmSideThick() / 2. << ":"
                                << fabs(vecSpmZPts()[1] - vecSpmZPts()[0]) / 2.;
 #endif
     const std::vector<double>& sideParms(sideSolid.parameters());
     const DDLogicalPart sideLog(spmSideName(), spmSideMat(), sideSolid);
 
     DDSolid temp1;
     DDSolid temp2;
     for (unsigned int icopy(1); icopy <= 2; ++icopy) {
       const std::vector<double>& tvec(1 == icopy ? vecSpmCutTM() : vecSpmCutTP());
       const double rang(1 == icopy ? spmCutRM() : spmCutRP());
 
       const Tl3D tr(tvec[0], tvec[1], tvec[2]);
       const RoZ3D ro(rang);
       const Tf3D alltrot(
           RoZ3D(1 == icopy ? spmLowPhi() : spmLowPhi() + spmDelPhi()) *
           Tl3D((vecSpmRMax()[indx] + vecSpmRMin()[indx]) / 2., 0, (vecSpmZPts().front() + vecSpmZPts().back()) / 2.) *
           tr * ro);
 
       const DDRotation ddrot(myrot(spmCutName().name() + std::to_string(icopy), alltrot.getRotation()));
       const DDTranslation ddtra(alltrot.getTranslation());
 
       const Tl3D trSide(tvec[0],
                         tvec[1] + (1 == icopy ? 1. : -1.) * (cutBoxParms[1] + sideParms[1]) +
                             (1 == icopy ? spmSideYOffM() : spmSideYOffP()),
                         tvec[2]);
       const RoZ3D roSide(rang);
       const Tf3D sideRot(RoZ3D(1 == icopy ? spmLowPhi() : spmLowPhi() + spmDelPhi()) *
                          Tl3D(vecSpmRMin().front() + sideParms[0], 0, vecSpmZPts().front() + sideParms[2]) * trSide *
                          roSide);
 
       const DDRotation sideddrot(myrot(spmSideName().name() + std::to_string(icopy), sideRot.getRotation()));
       const DDTranslation sideddtra(sideRot.getTranslation());
 
       cpv.position(sideLog, spmName(), icopy, sideddtra, sideddrot);
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeomX") << sideLog.name() << ":" << icopy << " positioned in " << spmName() << " at "
                                   << sideddtra << " with rotation";
 #endif
       if (0 != spmCutShow())  // do this if we are "showing" the boxes
       {
         cpv.position(spmCutLog, spmName(), icopy, ddtra, ddrot);
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << spmCutLog.name() << ":" << icopy << " positioned in " << spmName() << " at "
                                     << ddtra << " with rotation";
 #endif
       } else  // do this if we are subtracting the boxes
       {
         if (1 == icopy) {
           temp1 = DDSolidFactory::subtraction(DDName(m_SpmName + "_T1"), spmcut1ddname, spmCutBox, ddtra, ddrot);
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeom") << DDName(m_SpmName + "_T1") << " Subtraction " << spmcut1ddname << ":"
                                      << spmCutBox.name() << " at " << ddtra;
 #endif
         } else {
           temp2 = DDSolidFactory::subtraction(spmName(), temp1, spmCutBox, ddtra, ddrot);
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeom") << spmName() << " Subtraction " << temp1.name() << ":" << spmCutBox.name()
                                      << " at " << ddtra;
 #endif
         }
       }
     }
 
     const DDLogicalPart spmLog(spmName(), spmMat(), ((0 != spmCutShow()) ? ddspm : temp2));
 
     const double dphi(360. * deg / (1. * spmNPerHalf()));
     for (unsigned int iphi(0); iphi < 2 * spmNPerHalf(); ++iphi) {
       const double phi(iphi * dphi + spmPhiOff());  //- 0.000130/deg ) ;
 
       // this base rotation includes the base translation & rotation
       // plus flipping for the negative z hemisphere, plus
       // the phi rotation for this module
       const Tf3D rotaBase(RoZ3D(phi) * (iphi < spmNPerHalf() ? Ro3D() : RoX3D(180. * deg)) *
                           Ro3D(vecSpmBRota()[3], Vec3(vecSpmBRota()[0], vecSpmBRota()[1], vecSpmBRota()[2])) *
                           Tl3D(Vec3(vecSpmBTran()[0], vecSpmBTran()[1], vecSpmBTran()[2])));
 
       // here the individual rotations & translations of the supermodule
       // are implemented on top of the overall "base" rotation & translation
 
       const unsigned int offr(4 * iphi);
       const unsigned int offt(3 * iphi);
 
       const Ro3D r1(vecSpmRota()[offr + 3],
                     Vec3(vecSpmRota()[offr + 0], vecSpmRota()[offr + 1], vecSpmRota()[offr + 2]));
 
       const Tf3D rotaExtra(r1 * Tl3D(Vec3(vecSpmTran()[offt + 0], vecSpmTran()[offt + 1], vecSpmTran()[offt + 2])));
 
       const Tf3D both(rotaExtra * rotaBase);
 
       const DDRotation rota(myrot(spmName().name() + std::to_string(phi / deg), both.getRotation()));
 
       if (vecSpmHere()[iphi] != 0) {
         // convert from CLHEP to DDTranslation & etc. -- Michael Case
         DDTranslation myTran(both.getTranslation().x(), both.getTranslation().y(), both.getTranslation().z());
         cpv.position(spmLog, barName(), iphi + 1, myTran, rota);
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << spmLog.name() << ":" << (iphi + 1) << " positioned in " << barName() << " at "
                                     << myTran << " with rotation";
 #endif
       }
     }
     // End Supermodule parent------------------------------------------------------------
 
     // Begin Inner Layer volumes---------------------------------------------------------
     const double ilyLength(vecSpmZPts()[1] - vecSpmZPts()[0]);
     double ilyRMin(vecSpmRMin()[0]);
     double ilyThick(0);
     for (unsigned int ilyx(0); ilyx != vecIlyThick().size(); ++ilyx) {
       ilyThick += vecIlyThick()[ilyx];
     }
     const DDName ilyDDName(ddname(ilyName()));
     const DDSolid ilySolid(
         DDSolidFactory::tubs(ilyDDName, ilyLength / 2, ilyRMin, ilyRMin + ilyThick, ilyPhiLow(), ilyDelPhi()));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeom") << ilyDDName << " Tubs " << ilyLength / 2 << ":" << ilyRMin << ":" << ilyRMin + ilyThick
                                << ":" << ilyPhiLow() / CLHEP::deg << ":" << ilyDelPhi() / CLHEP::deg;
 #endif
     const DDLogicalPart ilyLog(ilyDDName, spmMat(), ilySolid);
     cpv.position(ilyLog, spmLog, copyOne, DDTranslation(0, 0, ilyLength / 2), DDRotation());
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeomX") << ilyDDName << ":" << copyOne << " positioned in " << spmLog.name() << " at "
                                 << DDTranslation(0, 0, ilyLength / 2) << " with no rotation";
 #endif
     DDLogicalPart ilyPipeLog[200];
 
     if (0 != ilyPipeHere()) {
       for (unsigned int iPipeType(0); iPipeType != vecIlyPipeLength().size(); ++iPipeType) {
         const DDName pName(ddname(ilyPipeName() + "_" + std::to_string(iPipeType + 1)));
 
         DDSolid ilyPipeSolid(
             DDSolidFactory::tubs(pName, vecIlyPipeLength()[iPipeType] / 2., 0, ilyPipeOD() / 2, 0 * deg, 360 * deg));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeom") << pName << " Tubs " << vecIlyPipeLength()[iPipeType] / 2.
                                    << ":0:" << ilyPipeOD() / 2 << ":0:360";
 #endif
         ilyPipeLog[iPipeType] = DDLogicalPart(pName, ilyPipeMat(), ilyPipeSolid);
 
         const DDName pWaName(ddname(ilyPipeName() + "Wa_" + std::to_string(iPipeType + 1)));
         DDSolid ilyPipeWaSolid(
             DDSolidFactory::tubs(pWaName, vecIlyPipeLength()[iPipeType] / 2., 0, ilyPipeID() / 2, 0 * deg, 360 * deg));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeom") << pWaName << " Tubs " << vecIlyPipeLength()[iPipeType] / 2.
                                    << ":0:" << ilyPipeID() / 2 << ":0:360";
 #endif
         const DDLogicalPart ilyPipeWaLog(pWaName, backPipeWaterMat(), ilyPipeWaSolid);
 
         cpv.position(ilyPipeWaLog, pName, copyOne, DDTranslation(0, 0, 0), DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << pWaName << ":" << copyOne << " positioned in " << pName << " at "
                                     << DDTranslation(0, 0, 0) << " with no rotation";
 #endif
       }
     }
 
     DDSolid ilyPTMSolid(
         DDSolidFactory::box(ilyPTMName(), ilyPTMHeight() / 2., ilyPTMWidth() / 2., ilyPTMLength() / 2.));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeom") << ilyPTMName() << " Box " << ilyPTMHeight() / 2. << ":" << ilyPTMWidth() / 2. << ":"
                                << ilyPTMLength() / 2.;
 #endif
     const DDLogicalPart ilyPTMLog(ilyPTMName(), ilyPTMMat(), ilyPTMSolid);
 
     DDSolid ilyFanOutSolid(
         DDSolidFactory::box(ilyFanOutName(), ilyFanOutHeight() / 2., ilyFanOutWidth() / 2., ilyFanOutLength() / 2.));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeom") << ilyFanOutName() << " Box " << ilyFanOutHeight() / 2. << ":" << ilyFanOutWidth() / 2.
                                << ":" << ilyFanOutLength() / 2.;
 #endif
     const DDLogicalPart ilyFanOutLog(ilyFanOutName(), ilyFanOutMat(), ilyFanOutSolid);
 
     DDSolid ilyFEMSolid(
         DDSolidFactory::box(ilyFEMName(), ilyFEMHeight() / 2., ilyFEMWidth() / 2., ilyFEMLength() / 2.));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeom") << ilyFEMName() << " Box " << ilyFEMHeight() / 2. << ":" << ilyFEMWidth() / 2. << ":"
                                << ilyFEMLength() / 2.;
 #endif
     const DDLogicalPart ilyFEMLog(ilyFEMName(), ilyFEMMat(), ilyFEMSolid);
 
     DDSolid ilyDiffSolid(
         DDSolidFactory::box(ilyDiffName(), ilyFanOutHeight() / 2., ilyFanOutWidth() / 2., ilyDiffLength() / 2.));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeom") << ilyDiffName() << " Box " << ilyFanOutHeight() / 2. << ":" << ilyFanOutWidth() / 2.
                                << ":" << ilyDiffLength() / 2.;
 #endif
     const DDLogicalPart ilyDiffLog(ilyDiffName(), ilyDiffMat(), ilyDiffSolid);
 
     DDSolid ilyBndlSolid(
         DDSolidFactory::box(ilyBndlName(), ilyFanOutHeight() / 2., ilyFanOutWidth() / 2., ilyBndlLength() / 2.));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeom") << ilyBndlName() << " Box " << ilyFanOutHeight() / 2. << ":" << ilyFanOutWidth() / 2.
                                << ":" << ilyBndlLength() / 2.;
 #endif
     const DDLogicalPart ilyBndlLog(ilyBndlName(), ilyBndlMat(), ilyBndlSolid);
     cpv.position(ilyDiffLog,
                  ilyFanOutName(),
                  copyOne,
                  DDTranslation(0, 0, -ilyFanOutLength() / 2 + ilyDiffLength() / 2 + ilyDiffOff()),
                  DDRotation());
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeomX") << ilyDiffName() << ":" << copyOne << " positioned in " << ilyFanOutName() << " at "
                                 << DDTranslation(0, 0, -ilyFanOutLength() / 2 + ilyDiffLength() / 2 + ilyDiffOff())
                                 << " with no rotation";
 #endif
     cpv.position(ilyBndlLog,
                  ilyFanOutName(),
                  copyOne,
                  DDTranslation(0, 0, -ilyFanOutLength() / 2 + ilyBndlLength() / 2 + ilyBndlOff()),
                  DDRotation());
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeomX") << ilyBndlName() << ":" << copyOne << " positioned in " << ilyFanOutName() << " at "
                                 << DDTranslation(0, 0, -ilyFanOutLength() / 2 + ilyBndlLength() / 2 + ilyBndlOff())
                                 << " with no rotation";
 #endif
     for (unsigned int ily(0); ily != vecIlyThick().size(); ++ily) {
       const double ilyRMax(ilyRMin + vecIlyThick()[ily]);
       const DDName xilyName(ddname(ilyName() + std::to_string(ily)));
       const DDSolid xilySolid(
           DDSolidFactory::tubs(xilyName, ilyLength / 2, ilyRMin, ilyRMax, ilyPhiLow(), ilyDelPhi()));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << xilyName << " Tubs " << ilyLength / 2 << ":" << ilyRMin << ":" << ilyRMax << ":"
                                  << ilyPhiLow() / CLHEP::deg << ":" << ilyDelPhi() / CLHEP::deg;
 #endif
 
       const DDLogicalPart xilyLog(xilyName, ddmat(vecIlyMat()[ily]), xilySolid);
 
       if (0 != ilyHere()) {
         cpv.position(xilyLog, ilyLog, copyOne, DDTranslation(0, 0, 0), DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << xilyLog.name() << ":" << copyOne << " positioned in " << ilyLog.name() << " at "
                                     << DDTranslation(0, 0, 0) << " with no rotation";
 #endif
         unsigned int copyNum[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
 
         if (10 * mm < vecIlyThick()[ily] && vecIlyThick().size() != (ily + 1) && 0 != ilyPipeHere()) {
           if (0 != ilyPTMHere()) {
             unsigned int ptmCopy(0);
             for (unsigned int ilyPTM(0); ilyPTM != vecIlyPTMZ().size(); ++ilyPTM) {
               const double radius(ilyRMax - 1 * mm - ilyPTMHeight() / 2.);
               const double phi(vecIlyPTMPhi()[ilyPTM]);
               const double yy(radius * sin(phi));
               const double xx(radius * cos(phi));
               ++ptmCopy;
               cpv.position(ilyPTMLog,
                            xilyLog,
                            ptmCopy,
                            DDTranslation(xx, yy, vecIlyPTMZ()[ilyPTM] - ilyLength / 2),
                            myrot(ilyPTMLog.name().name() + "_rot" + std::to_string(ptmCopy), CLHEP::HepRotationZ(phi)));
 #ifdef EDM_ML_DEBUG
               edm::LogVerbatim("EBGeomX")
                   << ilyPTMLog.name() << ":" << ptmCopy << " positioned in " << xilyLog.name() << " at "
                   << DDTranslation(xx, yy, vecIlyPTMZ()[ilyPTM] - ilyLength / 2) << " with rotation";
 #endif
             }
           }
           if (0 != ilyFanOutHere()) {
             unsigned int fanOutCopy(0);
             for (unsigned int ilyFO(0); ilyFO != vecIlyFanOutZ().size(); ++ilyFO) {
               const double radius(ilyRMax - 1 * mm - ilyFanOutHeight() / 2.);
               const double phi(vecIlyFanOutPhi()[ilyFO]);
               const double yy(radius * sin(phi));
               const double xx(radius * cos(phi));
               ++fanOutCopy;
               cpv.position(ilyFanOutLog,
                            xilyLog,
                            fanOutCopy,
                            DDTranslation(xx, yy, vecIlyFanOutZ()[ilyFO] - ilyLength / 2),
                            myrot(ilyFanOutLog.name().name() + "_rot" + std::to_string(fanOutCopy),
                                  CLHEP::HepRotationZ(phi) * CLHEP::HepRotationY(180 * deg)));
 #ifdef EDM_ML_DEBUG
               edm::LogVerbatim("EBGeomX")
                   << ilyFanOutLog.name() << ":" << fanOutCopy << " positioned in " << xilyLog.name() << " at "
                   << DDTranslation(xx, yy, vecIlyFanOutZ()[ilyFO] - ilyLength / 2) << " with rotation";
 #endif
             }
             unsigned int femCopy(0);
             for (unsigned int ilyFEM(0); ilyFEM != vecIlyFEMZ().size(); ++ilyFEM) {
               const double radius(ilyRMax - 1 * mm - ilyFEMHeight() / 2.);
               const double phi(vecIlyFEMPhi()[ilyFEM]);
               const double yy(radius * sin(phi));
               const double xx(radius * cos(phi));
               ++femCopy;
               cpv.position(ilyFEMLog,
                            xilyLog,
                            femCopy,
                            DDTranslation(xx, yy, vecIlyFEMZ()[ilyFEM] - ilyLength / 2),
                            myrot(ilyFEMLog.name().name() + "_rot" + std::to_string(femCopy), CLHEP::HepRotationZ(phi)));
 #ifdef EDM_ML_DEBUG
               edm::LogVerbatim("EBGeomX")
                   << ilyFEMLog.name() << ":" << femCopy << " positioned in " << xilyLog.name() << " at "
                   << DDTranslation(xx, yy, vecIlyFEMZ()[ilyFEM] - ilyLength / 2) << " with rotation";
 #endif
             }
           }
           for (unsigned int iPipe(0); iPipe != vecIlyPipePhi().size(); ++iPipe) {
             const unsigned int type(static_cast<unsigned int>(round(vecIlyPipeType()[iPipe])));
             //        edm::LogVerbatim("EcalGeom") <<" iPipe, type= " << iPipe << ", " << type;
             const double zz(-ilyLength / 2 + vecIlyPipeZ()[iPipe] + (9 > type ? vecIlyPipeLength()[type] / 2. : 0));
 
             for (unsigned int ly(0); ly != 2; ++ly) {
               const double radius(0 == ly ? ilyRMin + ilyPipeOD() / 2. + 1 * mm : ilyRMax - ilyPipeOD() / 2. - 1 * mm);
               const double phi(vecIlyPipePhi()[iPipe]);
               const double yy(radius * sin(phi));
               const double xx(radius * cos(phi));
               ++copyNum[type],
                   cpv.position(
                       ilyPipeLog[type],
                       xilyLog,
                       copyNum[type],
                       DDTranslation(xx, yy, zz),
                       (9 > type ? DDRotation()
                                 : myrot(ilyPipeLog[type].name().name() + "_rot" + std::to_string(copyNum[type]),
                                         Rota(Vec3(xx, yy, 0), 90 * deg))));
 #ifdef EDM_ML_DEBUG
               std::string rrr = (9 > type) ? " with no rotation" : " with rotation";
               edm::LogVerbatim("EBGeomX") << ilyPipeLog[type].name() << ":" << copyNum[type] << " positioned in "
                                           << xilyLog.name() << " at" << DDTranslation(xx, yy, zz) << rrr;
 #endif
             }
           }
         }
       }
       ilyRMin = ilyRMax;
     }
     // End Inner Layer volumes---------------------------------------------------------
 
     const DDName clyrName(DDName("ECLYR"));
     std::vector<double> cri;
     std::vector<double> cro;
     std::vector<double> czz;
     czz.emplace_back(vecSpmZPts()[1]);
     cri.emplace_back(vecSpmRMin()[0]);
     cro.emplace_back(vecSpmRMin()[0] + 25 * mm);
     czz.emplace_back(vecSpmZPts()[2]);
     cri.emplace_back(vecSpmRMin()[2]);
     cro.emplace_back(vecSpmRMin()[2] + 10 * mm);
     const DDSolid clyrSolid(DDSolidFactory::polycone(clyrName, -9.5 * deg, 19 * deg, czz, cri, cro));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeom") << clyrName << " PolyCone from -9.5 to 9.5 with " << czz.size() << " points";
     for (unsigned int k = 0; k < czz.size(); ++k)
       edm::LogVerbatim("EBGeom") << "[" << k << "] " << czz[k] << ":" << cri[k] << ":" << cro[k];
 #endif
     const DDLogicalPart clyrLog(clyrName, ddmat(vecIlyMat()[4]), clyrSolid);
     cpv.position(clyrLog, spmLog, copyOne, DDTranslation(0, 0, 0), DDRotation());
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeomX") << clyrLog.name() << ":" << copyOne << " positioned in " << spmLog.name() << " at "
                                 << DDTranslation(0, 0, 0) << " with no rotation";
 #endif
     // Begin Alveolar Wedge parent ------------------------------------------------------
     //----------------
 
     // the next few lines accumulate dimensions appropriate to crystal type 1
     // which we use to set some of the features of the half-alveolar wedge (hawR).
 
     //      const double ANom1 ( vecNomCryDimAR()[0] ) ;
     const double BNom1(vecNomCryDimCR()[0]);
     const double bNom1(vecNomCryDimCF()[0]);
     //      const double HNom1 ( vecNomCryDimBR()[0] ) ;
     //      const double hNom1 ( vecNomCryDimBF()[0] ) ;
     const double sWall1(wallThAlv());
     const double fWall1(wallFrAlv());
     //      const double rWall1( wallReAlv() ) ;
     const double sWrap1(wrapThAlv());
     const double fWrap1(wrapFrAlv());
     //      const double rWrap1( wrapReAlv() ) ;
     const double sClr1(clrThAlv());
     const double fClr1(clrFrAlv());
     //      const double rClr1 ( clrReAlv() ) ;
     const double LNom1(nomCryDimLZ());
     const double beta1(atan((BNom1 - bNom1) / LNom1));
     //      const double cosbeta1   ( cos( beta1 ) ) ;
     const double sinbeta1(sin(beta1));
 
     const double tana_hawR((BNom1 - bNom1) / LNom1);
 
     const double H_hawR(hawRHBIG());
     const double h_hawR(hawRhsml());
     const double a_hawR(bNom1 + sClr1 + 2 * sWrap1 + 2 * sWall1 - sinbeta1 * (fClr1 + fWrap1 + fWall1));
     const double B_hawR(a_hawR + H_hawR * tana_hawR);
     const double b_hawR(a_hawR + h_hawR * tana_hawR);
     const double L_hawR(vecSpmZPts()[2]);
 
     const Trap trapHAWR(a_hawR / 2.,  //double aHalfLengthXNegZLoY , // bl1, A/2
                         a_hawR / 2.,  //double aHalfLengthXPosZLoY , // bl2, a/2
                         b_hawR / 2.,  //double aHalfLengthXPosZHiY , // tl2, b/2
                         H_hawR / 2.,  //double aHalfLengthYNegZ    , // h1, H/2
                         h_hawR / 2.,  //double aHalfLengthYPosZ    , // h2, h/2
                         L_hawR / 2.,  //double aHalfLengthZ        , // dz,  L/2
                         90 * deg,     //double aAngleAD            , // alfa1
                         0,            //double aCoord15X           , // x15
                         0             //double aCoord15Y             // y15
     );
 
     const DDName hawRName1(ddname(hawRName().name() + "1"));
     const DDSolid hawRSolid1(mytrap(hawRName1.name(), trapHAWR));
     const DDLogicalPart hawRLog1(hawRName1, spmMat(), hawRSolid1);
 
     const double al1_fawR(atan((B_hawR - a_hawR) / H_hawR) + M_PI_2);
 
     // here is trap for Full Alveolar Wedge
     const Trap trapFAW(a_hawR,       //double aHalfLengthXNegZLoY , // bl1, A/2
                        a_hawR,       //double aHalfLengthXPosZLoY , // bl2, a/2
                        b_hawR,       //double aHalfLengthXPosZHiY , // tl2, b/2
                        H_hawR / 2.,  //double aHalfLengthYNegZ    , // h1, H/2
                        h_hawR / 2.,  //double aHalfLengthYPosZ    , // h2, h/2
                        L_hawR / 2.,  //double aHalfLengthZ        , // dz,  L/2
                        al1_fawR,     //double aAngleAD            , // alfa1
                        0,            //double aCoord15X           , // x15
                        0             //double aCoord15Y             // y15
     );
 
     const DDName fawName1(ddname(fawName().name() + "1"));
     const DDSolid fawSolid1(mytrap(fawName1.name(), trapFAW));
     const DDLogicalPart fawLog1(fawName1, spmMat(), fawSolid1);
 
     const Trap::VertexList vHAW(trapHAWR.vertexList());
     const Trap::VertexList vFAW(trapFAW.vertexList());
 
     const double hawBoxClr(1 * mm);
 
     // HAW cut box to cut off back end of wedge
     const DDName hawCutName(ddname(hawRName().name() + "CUTBOX"));
     const DDSolid hawCutBox(DDSolidFactory::box(hawCutName, b_hawR / 2 + hawBoxClr, hawRCutY() / 2, hawRCutZ() / 2));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeom") << hawCutName << " Box " << (b_hawR / 2 + hawBoxClr) << ":" << hawRCutY() / 2 << ":"
                                << hawRCutZ() / 2;
 #endif
     const std::vector<double>& hawBoxParms(hawCutBox.parameters());
     const DDLogicalPart hawCutLog(hawCutName, spmMat(), hawCutBox);
 
     const Pt3D b1(hawBoxParms[0], hawBoxParms[1], hawBoxParms[2]);
     const Pt3D b2(-hawBoxParms[0], hawBoxParms[1], hawBoxParms[2]);
     const Pt3D b3(-hawBoxParms[0], hawBoxParms[1], -hawBoxParms[2]);
 
     const double zDel(sqrt(4 * hawBoxParms[2] * hawBoxParms[2] - (h_hawR - hawRCutDelY()) * (h_hawR - hawRCutDelY())));
 
     const Tf3D hawCutForm(b1,
                           b2,
                           b3,
                           vHAW[2] + Pt3D(hawBoxClr, -hawRCutDelY(), 0),
                           vHAW[1] + Pt3D(-hawBoxClr, -hawRCutDelY(), 0),
                           Pt3D(vHAW[0].x() - hawBoxClr, vHAW[0].y(), vHAW[0].z() - zDel));
 
     const DDSolid hawRSolid(DDSolidFactory::subtraction(
         hawRName(),
         hawRSolid1,
         hawCutBox,
         DDTranslation(
             hawCutForm.getTranslation().x(), hawCutForm.getTranslation().y(), hawCutForm.getTranslation().z()),
         myrot(hawCutName.name() + "R", hawCutForm.getRotation())));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeom") << hawRName() << " Subtraction " << hawRSolid1.name() << ":" << hawCutBox.name()
                                << " at "
                                << DDTranslation(hawCutForm.getTranslation().x(),
                                                 hawCutForm.getTranslation().y(),
                                                 hawCutForm.getTranslation().z());
 #endif
     const DDLogicalPart hawRLog(hawRName(), spmMat(), hawRSolid);
 
     // FAW cut box to cut off back end of wedge
     const DDName fawCutName(ddname(fawName().name() + "CUTBOX"));
     const DDSolid fawCutBox(DDSolidFactory::box(fawCutName, 2 * hawBoxParms[0], hawBoxParms[1], hawBoxParms[2]));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeom") << fawCutName << " Box " << 2 * hawBoxParms[0] << ":" << hawBoxParms[1] << ":"
                                << hawBoxParms[2];
 #endif
 
     const std::vector<double>& fawBoxParms(fawCutBox.parameters());
     const DDLogicalPart fawCutLog(fawCutName, spmMat(), fawCutBox);
 
     const Pt3D bb1(fawBoxParms[0], fawBoxParms[1], fawBoxParms[2]);
     const Pt3D bb2(-fawBoxParms[0], fawBoxParms[1], fawBoxParms[2]);
     const Pt3D bb3(-fawBoxParms[0], fawBoxParms[1], -fawBoxParms[2]);
 
     const Tf3D fawCutForm(bb1,
                           bb2,
                           bb3,
                           vFAW[2] + Pt3D(2 * hawBoxClr, -5 * mm, 0),
                           vFAW[1] + Pt3D(-2 * hawBoxClr, -5 * mm, 0),
                           Pt3D(vFAW[1].x() - 2 * hawBoxClr, vFAW[1].y() - trapFAW.h(), vFAW[1].z() - zDel));
 
     const DDSolid fawSolid(DDSolidFactory::subtraction(
         fawName(),
         fawSolid1,
         fawCutBox,
         DDTranslation(
             fawCutForm.getTranslation().x(), fawCutForm.getTranslation().y(), fawCutForm.getTranslation().z()),
         myrot(fawCutName.name() + "R", fawCutForm.getRotation())));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeom") << fawName() << " Subtraction " << fawSolid1.name() << ":" << fawCutBox.name() << " at "
                                << DDTranslation(fawCutForm.getTranslation().x(),
                                                 fawCutForm.getTranslation().y(),
                                                 fawCutForm.getTranslation().z());
 #endif
     const DDLogicalPart fawLog(fawName(), spmMat(), fawSolid);
 
     const Tf3D hawRform(vHAW[3],
                         vHAW[0],
                         vHAW[1],  // HAW inside FAW
                         vFAW[3],
                         0.5 * (vFAW[0] + vFAW[3]),
                         0.5 * (vFAW[1] + vFAW[2]));
     cpv.position(
         hawRLog,
         fawLog,
         copyOne,
         DDTranslation(hawRform.getTranslation().x(), hawRform.getTranslation().y(), hawRform.getTranslation().z()),
         myrot(hawRName().name() + "R", hawRform.getRotation()));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeomX") << hawRLog.name() << ":" << copyOne << " positioned in " << fawLog.name() << " at "
                                 << DDTranslation(hawRform.getTranslation().x(),
                                                  hawRform.getTranslation().y(),
                                                  hawRform.getTranslation().z())
                                 << " with rotation";
 #endif
     cpv.position(
         hawRLog,
         fawLog,
         copyTwo,
         DDTranslation(-hawRform.getTranslation().x(), -hawRform.getTranslation().y(), -hawRform.getTranslation().z()),
         myrot(hawRName().name() + "RotRefl",
               CLHEP::HepRotationY(180 * deg) *  // rotate about Y after refl thru Z
                   CLHEP::HepRep3x3(1, 0, 0, 0, 1, 0, 0, 0, -1)));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeomX") << hawRLog.name() << ":" << copyTwo << " positioned in " << fawLog.name() << " at "
                                 << DDTranslation(-hawRform.getTranslation().x(),
                                                  -hawRform.getTranslation().y(),
                                                  -hawRform.getTranslation().z())
                                 << " with rotation";
 #endif
     /* this for display of haw cut box instead of subtraction
       cpv.position( hawCutLog,
          hawRName, 
          copyOne, 
          hawCutForm.getTranslation(),
          myrot( hawCutName.name()+"R", 
             hawCutForm.getRotation() )   ) ;
 */
 
     for (unsigned int iPhi(1); iPhi <= nFawPerSupm(); ++iPhi) {
       const double rPhi(fawPhiOff() + (iPhi - 0.5) * fawDelPhi());
 
       const Tf3D fawform(RoZ3D(rPhi) * Tl3D(fawRadOff() + (trapFAW.H() + trapFAW.h()) / 4, 0, trapFAW.L() / 2) *
                          RoZ3D(-90 * deg + fawPhiRot()));
       if (fawHere())
         cpv.position(
             fawLog,
             spmLog,
             iPhi,
             DDTranslation(fawform.getTranslation().x(), fawform.getTranslation().y(), fawform.getTranslation().z()),
             myrot(fawName().name() + "_Rot" + std::to_string(iPhi), fawform.getRotation()));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeomX") << fawLog.name() << ":" << iPhi << " positioned in " << spmLog.name() << " at "
                                   << DDTranslation(fawform.getTranslation().x(),
                                                    fawform.getTranslation().y(),
                                                    fawform.getTranslation().z())
                                   << " with rotation";
 #endif
     }
 
     // End Alveolar Wedge parent ------------------------------------------------------
 
     // Begin Grid + Tablet insertion
 
     const double h_Grid(gridThick());
 
     const Trap trapGrid((B_hawR - h_Grid * (B_hawR - a_hawR) / H_hawR) / 2,  // bl1, A/2
                         (b_hawR - h_Grid * (B_hawR - a_hawR) / H_hawR) / 2,  // bl2, a/2
                         b_hawR / 2.,                                         // tl2, b/2
                         h_Grid / 2.,                                         // h1, H/2
                         h_Grid / 2.,                                         // h2, h/2
                         (L_hawR - 8 * cm) / 2.,                              // dz,  L/2
                         90 * deg,                                            // alfa1
                         0,                                                   // x15
                         H_hawR - h_hawR                                      // y15
     );
 
     const DDSolid gridSolid(mytrap(gridName().name(), trapGrid));
     const DDLogicalPart gridLog(gridName(), gridMat(), gridSolid);
 
     const Trap::VertexList vGrid(trapGrid.vertexList());
 
     const Tf3D gridForm(vGrid[4],
                         vGrid[5],
                         vGrid[6],  // Grid inside HAW
                         vHAW[5] - Pt3D(0, h_Grid, 0),
                         vHAW[5],
                         vHAW[6]);
 
     if (0 != gridHere())
       cpv.position(
           gridLog,
           hawRLog,
           copyOne,
           DDTranslation(gridForm.getTranslation().x(), gridForm.getTranslation().y(), gridForm.getTranslation().z()),
           myrot(gridName().name() + "R", gridForm.getRotation()));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeomX") << gridLog.name() << ":" << copyOne << " positioned in " << hawRLog.name() << " at "
                                 << DDTranslation(gridForm.getTranslation().x(),
                                                  gridForm.getTranslation().y(),
                                                  gridForm.getTranslation().z())
                                 << " with rotation";
 #endif
     // End Grid + Tablet insertion
 
     // begin filling Wedge with crystal plus supports --------------------------
 
     const double aNom(nomCryDimAF());
     const double LNom(nomCryDimLZ());
 
     const double AUnd(underAR());
     const double aUnd(underAF());
     //      const double BUnd ( underCR() ) ;
     const double bUnd(underCF());
     const double HUnd(underBR());
     const double hUnd(underBF());
     const double LUnd(underLZ());
 
     const double sWall(wallThAlv());
     const double sWrap(wrapThAlv());
     const double sClr(clrThAlv());
 
     const double fWall(wallFrAlv());
     const double fWrap(wrapFrAlv());
     const double fClr(clrFrAlv());
 
     const double rWall(wallReAlv());
     const double rWrap(wrapReAlv());
     const double rClr(clrReAlv());
 
     // theta is angle in yz plane between z axis & leading edge of crystal
     double theta(90 * deg);
     double zee(0 * mm);
     double side(0 * mm);
     double zeta(0 * deg);  // increment in theta for last crystal
 
     for (unsigned int cryType(1); cryType <= nCryTypes(); ++cryType) {
       const std::string sType("_" + std::string(10 > cryType ? "0" : "") + std::to_string(cryType));
 
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EcalGeom") << "Crytype=" << cryType;
 #endif
       const double ANom(vecNomCryDimAR()[cryType - 1]);
       const double BNom(vecNomCryDimCR()[cryType - 1]);
       const double bNom(vecNomCryDimCF()[cryType - 1]);
       const double HNom(vecNomCryDimBR()[cryType - 1]);
       const double hNom(vecNomCryDimBF()[cryType - 1]);
 
       const double alfCry(90 * deg + atan((bNom - bUnd - aNom + aUnd) / (hNom - hUnd)));
 
       const Trap trapCry((ANom - AUnd) / 2.,         //double aHalfLengthXNegZLoY , // bl1, A/2
                          (aNom - aUnd) / 2.,         //double aHalfLengthXPosZLoY , // bl2, a/2
                          (bNom - bUnd) / 2.,         //double aHalfLengthXPosZHiY , // tl2, b/2
                          (HNom - HUnd) / 2.,         //double aHalfLengthYNegZ    , // h1, H/2
                          (hNom - hUnd) / 2.,         //double aHalfLengthYPosZ    , // h2, h/2
                          (LNom - LUnd) / 2.,         //double aHalfLengthZ        , // dz,  L/2
                          alfCry,                     //double aAngleAD            , // alfa1
                          aNom - aUnd - ANom + AUnd,  //double aCoord15X           , // x15
                          hNom - hUnd - HNom + HUnd   //double aCoord15Y             // y15
       );
 
       const DDName cryDDName(cryName() + sType);
       const DDSolid crySolid(mytrap(cryDDName.name(), trapCry));
       const DDLogicalPart cryLog(cryDDName, cryMat(), crySolid);
 
       //++++++++++++++++++++++++++++++++++  APD ++++++++++++++++++++++++++++++++++
       const unsigned int copyCap(1);
 
       const DDName capDDName(capName().name() + sType);
 
       DDSolid capSolid(DDSolidFactory::box(capDDName, capXSize() / 2., capYSize() / 2., capThick() / 2.));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << capDDName << " Box " << capXSize() / 2. << ":" << capYSize() / 2 << ":"
                                  << capThick() / 2;
 #endif
 
       const DDLogicalPart capLog(capDDName, capMat(), capSolid);
 
       const DDName sglDDName(sglName().name() + sType);
 
       DDSolid sglSolid(DDSolidFactory::box(sglDDName, capXSize() / 2., capYSize() / 2., sglThick() / 2.));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << sglDDName << " Box " << capXSize() / 2. << ":" << capYSize() / 2 << ":"
                                  << sglThick() / 2;
 #endif
 
       const DDLogicalPart sglLog(sglDDName, sglMat(), sglSolid);
 
       const unsigned int copySGL(1);
 
       const DDName cerDDName(cerName().name() + sType);
 
       DDSolid cerSolid(DDSolidFactory::box(cerDDName, cerXSize() / 2., cerYSize() / 2., cerThick() / 2.));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << cerDDName << " Box " << cerXSize() / 2. << ":" << cerYSize() / 2 << ":"
                                  << cerThick() / 2;
 #endif
 
       const DDLogicalPart cerLog(cerDDName, cerMat(), cerSolid);
 
       unsigned int copyCER(0);
 
       const DDName bsiDDName(bsiName().name() + sType);
 
       DDSolid bsiSolid(DDSolidFactory::box(bsiDDName, bsiXSize() / 2., bsiYSize() / 2., bsiThick() / 2.));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << bsiDDName << " Box " << bsiXSize() / 2. << ":" << bsiYSize() / 2 << ":"
                                  << bsiThick() / 2;
 #endif
 
       const DDLogicalPart bsiLog(bsiDDName, bsiMat(), bsiSolid);
 
       const unsigned int copyBSi(1);
 
       const DDName atjDDName(atjName().name() + sType);
 
       DDSolid atjSolid(DDSolidFactory::box(atjDDName, apdSide() / 2., apdSide() / 2., atjThick() / 2.));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << atjDDName << " Box " << apdSide() / 2. << ":" << apdSide() / 2 << ":"
                                  << atjThick() / 2;
 #endif
 
       const DDLogicalPart atjLog(atjDDName, atjMat(), atjSolid);
 
       const unsigned int copyATJ(1);
 
       const DDName aglDDName(aglName().name() + sType);
 
       DDSolid aglSolid(DDSolidFactory::box(aglDDName, bsiXSize() / 2., bsiYSize() / 2., aglThick() / 2.));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << aglDDName << " Box " << bsiXSize() / 2. << ":" << bsiYSize() / 2 << ":"
                                  << aglThick() / 2;
 #endif
 
       const DDLogicalPart aglLog(aglDDName, aglMat(), aglSolid);
 
       const unsigned int copyAGL(1);
 
       const DDName andDDName(andName().name() + sType);
 
       DDSolid andSolid(DDSolidFactory::box(andDDName, apdSide() / 2., apdSide() / 2., andThick() / 2.));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << andDDName << " Box " << apdSide() / 2. << ":" << apdSide() / 2 << ":"
                                  << andThick() / 2;
 #endif
 
       const DDLogicalPart andLog(andDDName, andMat(), andSolid);
 
       const unsigned int copyAND(1);
 
       const DDName apdDDName(apdName().name() + sType);
 
       DDSolid apdSolid(DDSolidFactory::box(apdDDName, apdSide() / 2., apdSide() / 2., apdThick() / 2.));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << apdDDName << " Box " << apdSide() / 2. << ":" << apdSide() / 2. << ":"
                                  << apdThick() / 2;
 #endif
 
       const DDLogicalPart apdLog(apdDDName, apdMat(), apdSolid);
 
       const unsigned int copyAPD(1);
       //++++++++++++++++++++++++++++++++++ END APD ++++++++++++++++++++++++++++++++++
 
       const double delta(atan((HNom - hNom) / LNom));
       //unused   const double cosdelta  ( cos( delta ) ) ;
       const double sindelta(sin(delta));
 
       const double gamma(atan((ANom - aNom) / LNom));
       //unused   const double cosgamma  ( cos( gamma ) ) ;
       const double singamma(sin(gamma));
 
       const double beta(atan((BNom - bNom) / LNom));
       //unused   const double cosbeta   ( cos( beta ) ) ;
       const double sinbeta(sin(beta));
 
       // Now clearance trap
       const double alfClr(90 * deg + atan((bNom - aNom) / (hNom + sClr)));
 
       const Trap trapClr((ANom + sClr + rClr * singamma) / 2.,  //double aHalfLengthXNegZLoY , // bl1, A/2
                          (aNom + sClr - fClr * singamma) / 2.,  //double aHalfLengthXPosZLoY , // bl2, a/2
                          (bNom + sClr - fClr * sinbeta) / 2.,   //double aHalfLengthXPosZHiY , // tl2, b/2
                          (HNom + sClr + rClr * sindelta) / 2.,  //double aHalfLengthYNegZ    , // h1,  H/2
                          (hNom + sClr - fClr * sindelta) / 2.,  //double aHalfLengthYPosZ    , // h2,  h/2
                          (LNom + fClr + rClr) / 2.,             // dz,  L/2
                          alfClr,                                //double aAngleAD            , // alfa1
                          aNom - ANom,                           //double aCoord15X           , // x15
                          hNom - HNom                            //double aCoord15Y             // y15
       );
 
       const DDName clrDDName(clrName() + sType);
       const DDSolid clrSolid(mytrap(clrDDName.name(), trapClr));
       const DDLogicalPart clrLog(clrDDName, clrMat(), clrSolid);
 
       // Now wrap trap
 
       const double alfWrap(90 * deg + atan((bNom - aNom) / (hNom + sClr + 2 * sWrap)));
 
       const Trap trapWrap((trapClr.A() + 2 * sWrap + rWrap * singamma) / 2,  // bl1, A/2
                           (trapClr.a() + 2 * sWrap - fWrap * singamma) / 2,  // bl2, a/2
                           (trapClr.b() + 2 * sWrap - fWrap * sinbeta) / 2,   // tl2, b/2
                           (trapClr.H() + 2 * sWrap + rWrap * sindelta) / 2,  // h1,  H/2
                           (trapClr.h() + 2 * sWrap - fWrap * sindelta) / 2,  // h2,  h/2
                           (trapClr.L() + fWrap + rWrap) / 2.,                // dz,  L/2
                           alfWrap,                                           //double aAngleAD            , // alfa1
                           aNom - ANom - (cryType > 9 ? 0 : 0.020 * mm),
                           hNom - HNom  //double aCoord15Y             // y15
       );
 
       const DDName wrapDDName(wrapName() + sType);
       const DDSolid wrapSolid(mytrap(wrapDDName.name(), trapWrap));
       const DDLogicalPart wrapLog(wrapDDName, wrapMat(), wrapSolid);
 
       // Now wall trap
 
       const double alfWall(90 * deg + atan((bNom - aNom) / (hNom + sClr + 2 * sWrap + 2 * sWall)));
 
       const Trap trapWall((trapWrap.A() + 2 * sWall + rWall * singamma) / 2,  // A/2
                           (trapWrap.a() + 2 * sWall - fWall * singamma) / 2,  // a/2
                           (trapWrap.b() + 2 * sWall - fWall * sinbeta) / 2,   // b/2
                           (trapWrap.H() + 2 * sWall + rWall * sindelta) / 2,  // H/2
                           (trapWrap.h() + 2 * sWall - fWall * sindelta) / 2,  // h/2
                           (trapWrap.L() + fWall + rWall) / 2.,                // L/2
                           alfWall,                                            // alfa1
                           aNom - ANom - (cryType < 10 ? 0.150 * mm : 0.100 * mm),
                           hNom - HNom  // y15
       );
 
       const DDName wallDDName(wallName() + sType);
       const DDSolid wallSolid(mytrap(wallDDName.name(), trapWall));
       const DDLogicalPart wallLog(wallDDName, wallMat(), wallSolid);
 
       /*     
          edm::LogVerbatim("EcalGeom") << "Traps:\n a: " 
         << trapCry.a() << ", " 
         << trapClr.a() << ", " 
         << trapWrap.a() << ", " 
         << trapWall.a() << "\n b: " 
         << trapCry.b() << ", " 
         << trapClr.b() << ", " 
         << trapWrap.b() << ", " 
         << trapWall.b() << "\n A: " 
         << trapCry.A() << ", " 
         << trapClr.A() << ", " 
         << trapWrap.A() << ", " 
         << trapWall.A() << "\n B: " 
         << trapCry.B() << ", " 
         << trapClr.B() << ", " 
         << trapWrap.B() << ", " 
         << trapWall.B() << "\n h: " 
         << trapCry.h() << ", " 
         << trapClr.h() << ", " 
         << trapWrap.h() << ", " 
         << trapWall.h() << "\n H: " 
         << trapCry.H() << ", " 
         << trapClr.H() << ", " 
         << trapWrap.H() << ", " 
         << trapWall.H() << "\n a1: " 
         << trapCry.a1()/deg << ", " 
         << trapClr.a1()/deg << ", " 
         << trapWrap.a1()/deg << ", " 
         << trapWall.a1()/deg << "\n a4: " 
         << trapCry.a4()/deg << ", " 
         << trapClr.a4()/deg << ", " 
         << trapWrap.a4()/deg << ", " 
         << trapWall.a4()/deg << "\n x15: " 
         << trapCry.x15() << ", " 
         << trapClr.x15() << ", " 
         << trapWrap.x15() << ", " 
         << trapWall.x15() << "\n y15: " 
         << trapCry.y15() << ", " 
         << trapClr.y15() << ", " 
         << trapWrap.y15() << ", " 
         << trapWall.y15();
 */
       // Now for placement of cry within clr
       const Vec3 cryToClr(0, 0, (rClr - fClr) / 2);
 
       cpv.position(cryLog,
                    clrLog,
                    copyOne,
                    DDTranslation(0, 0, (rClr - fClr) / 2),  //SAME as cryToClr above.
                    DDRotation());
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeomX") << cryLog.name() << ":" << copyOne << " positioned in " << clrLog.name() << " at "
                                   << DDTranslation(0, 0, (rClr - fClr) / 2) << " with no rotation";
 #endif
       if (0 != capHere()) {
         cpv.position(aglLog, bsiLog, copyAGL, DDTranslation(0, 0, -aglThick() / 2. + bsiThick() / 2.), DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << aglLog.name() << ":" << copyAGL << " positioned in " << bsiLog.name() << " at "
                                     << DDTranslation(0, 0, -aglThick() / 2. + bsiThick() / 2.) << " with no rotation";
 #endif
 
         cpv.position(
             andLog, bsiLog, copyAND, DDTranslation(0, 0, -andThick() / 2. - aglThick() + bsiThick() / 2.), DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << andLog.name() << ":" << copyAND << " positioned in " << bsiLog.name() << " at "
                                     << DDTranslation(0, 0, -andThick() / 2. - aglThick() + bsiThick() / 2.)
                                     << " with no rotation";
 #endif
         cpv.position(apdLog,
                      bsiLog,
                      copyAPD,
                      DDTranslation(0, 0, -apdThick() / 2. - andThick() - aglThick() + bsiThick() / 2.),
                      DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << apdLog.name() << ":" << copyAPD << " positioned in " << bsiLog.name() << " at "
                                     << DDTranslation(0, 0, -apdThick() / 2. - andThick() - aglThick() + bsiThick() / 2.)
                                     << " with no rotation";
 #endif
         cpv.position(atjLog,
                      bsiLog,
                      copyATJ,
                      DDTranslation(0, 0, -atjThick() / 2. - apdThick() - andThick() - aglThick() + bsiThick() / 2.),
                      DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX")
             << atjLog.name() << ":" << copyATJ << " positioned in " << bsiLog.name() << " at "
             << DDTranslation(0, 0, -atjThick() / 2. - apdThick() - andThick() - aglThick() + bsiThick() / 2.)
             << " with no rotation";
 #endif
         cpv.position(bsiLog, cerLog, copyBSi, DDTranslation(0, 0, -bsiThick() / 2. + cerThick() / 2.), DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << bsiLog.name() << ":" << copyBSi << " positioned in " << cerLog.name() << " at "
                                     << DDTranslation(0, 0, -bsiThick() / 2. + cerThick() / 2.) << " with no rotation";
 #endif
         cpv.position(sglLog, capLog, copySGL, DDTranslation(0, 0, -sglThick() / 2. + capThick() / 2.), DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << sglLog.name() << ":" << copySGL << " positioned in " << capLog.name() << " at "
                                     << DDTranslation(0, 0, -sglThick() / 2. + capThick() / 2.) << " with no rotation";
 #endif
         for (unsigned int ijkl(0); ijkl != 2; ++ijkl) {
           cpv.position(cerLog,
                        capLog,
                        ++copyCER,
                        DDTranslation(trapCry.bl1() - (0 == ijkl ? apdX1() : apdX2()),
                                      trapCry.h1() - apdZ(),
                                      -sglThick() - cerThick() / 2. + capThick() / 2.),
                        DDRotation());
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << cerLog.name() << ":" << copyCER << " positioned in " << capLog.name() << " at "
                                       << DDTranslation(trapCry.bl1() - (0 == ijkl ? apdX1() : apdX2()),
                                                        (trapCry.h1() - apdZ()),
                                                        (-sglThick() - cerThick() / 2. + capThick() / 2.))
                                       << " with no rotation";
 #endif
         }
         cpv.position(capLog,
                      clrLog,
                      copyCap,
                      DDTranslation(0, 0, -trapCry.dz() - capThick() / 2. + (rClr - fClr) / 2.),
                      DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << capLog.name() << ":" << copyCap << " positioned in " << clrLog.name() << " at "
                                     << DDTranslation(0, 0, -trapCry.dz() - capThick() / 2. + (rClr - fClr) / 2.)
                                     << " with no rotation";
 #endif
       }
 
       const Vec3 clrToWrap(0, 0, (rWrap - fWrap) / 2);
 
       cpv.position(clrLog,
                    wrapLog,
                    copyOne,
                    DDTranslation(0, 0, (rWrap - fWrap) / 2),  //SAME as cryToWrap
                    DDRotation());
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeomX") << clrLog.name() << ":" << copyOne << " positioned in " << wrapLog.name() << " at "
                                   << DDTranslation(0, 0, (rWrap - fWrap) / 2) << " with no rotation";
 #endif
 
       // Now for placement of clr within wall
       const Vec3 wrapToWall1(0, 0, (rWall - fWall) / 2);
       const Vec3 wrapToWall(Vec3((cryType > 9 ? 0 : 0.005 * mm), 0, 0) + wrapToWall1);
 
       cpv.position(wrapLog,
                    wallLog,
                    copyOne,
                    DDTranslation(Vec3((cryType > 9 ? 0 : 0.005 * mm), 0, 0) + wrapToWall1),  //SAME as wrapToWall
                    DDRotation());
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeomX") << wrapLog.name() << ":" << copyOne << " positioned in " << wallLog.name() << " at "
                                   << DDTranslation(Vec3((cryType > 9 ? 0 : 0.005 * mm), 0, 0) + wrapToWall1)
                                   << " with no rotation";
 #endif
       const Trap::VertexList vWall(trapWall.vertexList());
       const Trap::VertexList vCry(trapCry.vertexList());
 
       const double sidePrime((trapWall.a() - trapCry.a()) / 2);
       const double frontPrime(fWall + fWrap + fClr + LUnd / 2);
 
       // define web plates with clearance ===========================================
 
       if (1 == cryType)  // first web plate: inside clearance volume
       {
         web(0,
             trapWall.b(),
             trapWall.B(),
             trapWall.L(),
             theta,
             vHAW[4] + Pt3D(0, hawYOffCry(), 0),
             hawRLog,
             zee,
             sidePrime,
             frontPrime,
             delta,
             cpv);
         zee += vecGapAlvEta()[0];
       }
 
       for (unsigned int etaAlv(1); etaAlv <= nCryPerAlvEta(); ++etaAlv) {
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EcalGeom") << "theta=" << theta / deg << ", sidePrime=" << sidePrime
                                      << ", frontPrime=" << frontPrime << ",  zeta=" << zeta << ", delta=" << delta
                                      << ",  zee=" << zee;
 #endif
         zee += 0.075 * mm + (side * cos(zeta) + trapWall.h() - sidePrime) / sin(theta);
 
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EcalGeom") << "New zee=" << zee;
 #endif
         // make transform for placing enclosed crystal
 
         const Pt3D trap2(vCry[2] + cryToClr + clrToWrap + wrapToWall);
 
         const Pt3D trap3(trap2 + Pt3D(0, -trapCry.h(), 0));
         const Pt3D trap1(trap3 + Pt3D(-trapCry.a(), 0, 0));
 
         const Pt3D wedge3(vHAW[4] + Pt3D(sidePrime, hawYOffCry(), zee));
         const Pt3D wedge2(wedge3 + Pt3D(0, trapCry.h() * cos(theta), -trapCry.h() * sin(theta)));
         const Pt3D wedge1(wedge3 + Pt3D(trapCry.a(), 0, 0));
 
         const Tf3D tForm1(trap1, trap2, trap3, wedge1, wedge2, wedge3);
 
         const double xx(0.050 * mm);
 
         const Tf3D tForm(HepGeom::Translate3D(xx, 0, 0) * tForm1);
 
         cpv.position(wallLog,
                      hawRLog,
                      etaAlv,
                      DDTranslation(tForm.getTranslation().x(), tForm.getTranslation().y(), tForm.getTranslation().z()),
                      myrot(wallLog.name().name() + "_" + std::to_string(etaAlv), tForm.getRotation()));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << wallLog.name() << ":" << etaAlv << " positioned in " << hawRLog.name() << " at "
                                     << DDTranslation(tForm.getTranslation().x(),
                                                      tForm.getTranslation().y(),
                                                      tForm.getTranslation().z())
                                     << " with rotation";
 #endif
         theta -= delta;
         side = sidePrime;
         zeta = delta;
       }
       if (5 == cryType || 9 == cryType || 13 == cryType || 17 == cryType)  // web plates
       {
         const unsigned int webIndex(cryType / 4);
         zee += 0.5 * vecGapAlvEta()[cryType] / sin(theta);
         web(webIndex,
             trapWall.a(),
             trapWall.A(),
             trapWall.L(),
             theta,
             vHAW[4] + Pt3D(0, hawYOffCry(), 0),
             hawRLog,
             zee,
             sidePrime,
             frontPrime,
             delta,
             cpv);
         zee += 0.5 * vecGapAlvEta()[cryType] / sin(theta);
       } else {
         if (17 != cryType)
           zee += vecGapAlvEta()[cryType] / sin(theta);
       }
     }
     // END   filling Wedge with crystal plus supports --------------------------
 
     //------------------------------------------------------------------------
     //------------------------------------------------------------------------
     //------------------------------------------------------------------------
     //------------------------------------------------------------------------
     //**************** Material at outer radius of supermodule ***************
     //------------------------------------------------------------------------
     //------------------------------------------------------------------------
     //------------------------------------------------------------------------
     //------------------------------------------------------------------------
 
     if (0 != backHere()) {
 
       const DDTranslation outtra(backXOff() + backSideHeight() / 2, backYOff(), backSideLength() / 2);
 
       const double realBPthick(backPlateThick() + backPlate2Thick());
 
       DDSolid backPlateSolid(
           DDSolidFactory::box(backPlateName(), backPlateWidth() / 2., realBPthick / 2., backPlateLength() / 2.));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << backPlateName() << " Box " << backPlateWidth() / 2. << ":" << realBPthick / 2.
                                  << ":" << backPlateLength() / 2;
 #endif
       const std::vector<double>& backPlateParms(backPlateSolid.parameters());
       const DDLogicalPart backPlateLog(backPlateName(), backPlateMat(), backPlateSolid);
 
       const DDTranslation backPlateTra(
           backSideHeight() / 2 + backPlateParms[1], 0 * mm, backPlateParms[2] - backSideLength() / 2);
 
       DDSolid backPlate2Solid(
           DDSolidFactory::box(backPlate2Name(), backPlateWidth() / 2., backPlate2Thick() / 2., backPlateLength() / 2.));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << backPlate2Name() << " Box " << backPlateWidth() / 2. << ":"
                                  << backPlate2Thick() / 2. << ":" << backPlateLength() / 2;
 #endif
 
       const DDLogicalPart backPlate2Log(backPlate2Name(), backPlate2Mat(), backPlate2Solid);
 
       const DDTranslation backPlate2Tra(0, -backPlateParms[1] + backPlate2Thick() / 2., 0);
       if (0 != backPlateHere()) {
         cpv.position(backPlate2Log, backPlateName(), copyOne, backPlate2Tra, DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << backPlate2Log.name() << ":" << copyOne << " positioned in " << backPlateName()
                                     << " at " << backPlate2Tra << " with no rotation";
 #endif
         cpv.position(backPlateLog,
                      spmName(),
                      copyOne,
                      outtra + backPlateTra,
                      myrot(backPlateName().name() + "Rot5", CLHEP::HepRotationZ(270 * deg)));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << backPlateLog.name() << ":" << copyOne << " positioned in " << spmName() << " at "
                                     << (outtra + backPlateTra) << " with rotation";
 #endif
       }
 
 
       const Trap trapBS(backSideWidth() / 2.,   //double aHalfLengthXNegZLoY , // bl1, A/2
                         backSideWidth() / 2.,   //double aHalfLengthXPosZLoY , // bl2, a/2
                         backSideWidth() / 4.,   //double aHalfLengthXPosZHiY , // tl2, b/2
                         backSideHeight() / 2.,  //double aHalfLengthYNegZ    , // h1, H/2
                         backSideHeight() / 2.,  //double aHalfLengthYPosZ    , // h2, h/2
                         backSideLength() / 2.,  //double aHalfLengthZ        , // dz,  L/2
                         backSideAngle(),        //double aAngleAD            , // alfa1
                         0,                      //double aCoord15X           , // x15
                         0                       //double aCoord15Y             // y15
       );
 
       const DDSolid backSideSolid(mytrap(backSideName().name(), trapBS));
       const DDLogicalPart backSideLog(backSideName(), backSideMat(), backSideSolid);
 
       const DDTranslation backSideTra1(0 * mm, backPlateWidth() / 2 + backSideYOff1(), 1 * mm);
       if (0 != backSideHere()) {
         cpv.position(
             backSideLog,
             spmName(),
             copyOne,
             outtra + backSideTra1,
             myrot(backSideName().name() + "Rot8", CLHEP::HepRotationX(180 * deg) * CLHEP::HepRotationZ(90 * deg)));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << backSideLog.name() << ":" << copyOne << " positioned in " << spmName() << " at "
                                     << (outtra + backSideTra1) << " with rotation";
 #endif
         const DDTranslation backSideTra2(0 * mm, -backPlateWidth() / 2 + backSideYOff2(), 1 * mm);
         cpv.position(backSideLog,
                      spmName(),
                      copyTwo,
                      outtra + backSideTra2,
                      myrot(backSideName().name() + "Rot9", CLHEP::HepRotationZ(90 * deg)));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << backSideLog.name() << ":" << copyTwo << " positioned in " << spmName() << " at "
                                     << (outtra + backSideTra2) << " with rotation";
 #endif
       }
 
       //=====================
       const double backCoolWidth(backCoolBarWidth() + 2. * backCoolTankWidth());
 
 
       const double manifCut(2 * mm);
 
       DDSolid mBManifSolid(DDSolidFactory::tubs(
           mBManifName(), backCoolWidth / 2. - manifCut, 0, mBManifOutDiam() / 2, 0 * deg, 360 * deg));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << mBManifName() << " Tubs " << backCoolWidth / 2. - manifCut
                                  << ":0:" << mBManifOutDiam() / 2 << ":0:360";
 #endif
       const DDLogicalPart mBManifLog(mBManifName(), mBManifMat(), mBManifSolid);
 
       const DDName mBManifWaName(ddname(mBManifName().name() + "Wa"));
       DDSolid mBManifWaSolid(DDSolidFactory::tubs(
           mBManifWaName, backCoolWidth / 2. - manifCut, 0, mBManifInnDiam() / 2, 0 * deg, 360 * deg));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << mBManifWaName << " Tubs " << backCoolWidth / 2. - manifCut
                                  << ":0:" << mBManifInnDiam() / 2 << ":0:360";
 #endif
       const DDLogicalPart mBManifWaLog(mBManifWaName, backPipeWaterMat(), mBManifWaSolid);
       cpv.position(mBManifWaLog, mBManifName(), copyOne, DDTranslation(0, 0, 0), DDRotation());
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeomX") << mBManifWaLog.name() << ":" << copyOne << " positioned in " << mBManifName()
                                   << " at " << DDTranslation(0, 0, 0) << " with no rotation";
 #endif
       //=====================
 
       const double deltaY(-5 * mm);
 
       DDSolid grEdgeSlotSolid(
           DDSolidFactory::box(grEdgeSlotName(), grEdgeSlotHeight() / 2., grEdgeSlotWidth() / 2., grilleThick() / 2.));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << grEdgeSlotName() << " Box " << grEdgeSlotHeight() / 2. << ":"
                                  << grEdgeSlotWidth() / 2 << ":" << grilleThick() / 2;
 #endif
       const DDLogicalPart grEdgeSlotLog(grEdgeSlotName(), grEdgeSlotMat(), grEdgeSlotSolid);
 
       unsigned int edgeSlotCopy(0);
       unsigned int midSlotCopy(0);
 
       DDLogicalPart grMidSlotLog[4];
 
       for (unsigned int iGr(0); iGr != vecGrilleHeight().size(); ++iGr) {
         DDName gName(ddname(grilleName() + std::to_string(iGr)));
         DDSolid grilleSolid(
             DDSolidFactory::box(gName, vecGrilleHeight()[iGr] / 2., backCoolWidth / 2., grilleThick() / 2.));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeom") << gName << " Box " << vecGrilleHeight()[iGr] / 2. << ":" << backCoolWidth / 2 << ":"
                                    << grilleThick() / 2;
 #endif
         const DDLogicalPart grilleLog(gName, grilleMat(), grilleSolid);
 
         const DDTranslation grilleTra(-realBPthick / 2 - vecGrilleHeight()[iGr] / 2,
                                       deltaY,
                                       vecGrilleZOff()[iGr] + grilleThick() / 2 - backSideLength() / 2);
         const DDTranslation gTra(outtra + backPlateTra + grilleTra);
 
         if (0 != grMidSlotHere() && 0 != iGr) {
           if (0 == (iGr - 1) % 2) {
             DDName mName(ddname(grMidSlotName() + std::to_string(iGr / 2)));
             DDSolid grMidSlotSolid(DDSolidFactory::box(
                 mName, vecGrMidSlotHeight()[(iGr - 1) / 2] / 2., grMidSlotWidth() / 2., grilleThick() / 2.));
 #ifdef EDM_ML_DEBUG
             edm::LogVerbatim("EBGeom") << mName << " Box " << vecGrMidSlotHeight()[(iGr - 1) / 2] / 2. << ":"
                                        << grMidSlotWidth() / 2 << ":" << grilleThick() / 2;
 #endif
             grMidSlotLog[(iGr - 1) / 2] = DDLogicalPart(mName, grMidSlotMat(), grMidSlotSolid);
           }
           cpv.position(grMidSlotLog[(iGr - 1) / 2],
                        gName,
                        ++midSlotCopy,
                        DDTranslation(
                            vecGrilleHeight()[iGr] / 2. - vecGrMidSlotHeight()[(iGr - 1) / 2] / 2., +grMidSlotXOff(), 0),
                        DDRotation());
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << grMidSlotLog[(iGr - 1) / 2].name() << ":" << midSlotCopy << " positioned in "
                                       << gName << " at "
                                       << DDTranslation(
                                              vecGrilleHeight()[iGr] / 2. - vecGrMidSlotHeight()[(iGr - 1) / 2] / 2.,
                                              +grMidSlotXOff(),
                                              0)
                                       << " with no rotation";
 #endif
 
           cpv.position(grMidSlotLog[(iGr - 1) / 2],
                        gName,
                        ++midSlotCopy,
                        DDTranslation(
                            vecGrilleHeight()[iGr] / 2. - vecGrMidSlotHeight()[(iGr - 1) / 2] / 2., -grMidSlotXOff(), 0),
                        DDRotation());
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << grMidSlotLog[(iGr - 1) / 2].name() << ":" << midSlotCopy << " positioned in "
                                       << gName << " at "
                                       << DDTranslation(
                                              vecGrilleHeight()[iGr] / 2. - vecGrMidSlotHeight()[(iGr - 1) / 2] / 2.,
                                              -grMidSlotXOff(),
                                              0)
                                       << " with no rotation";
 #endif
         }
 
         if (0 != grEdgeSlotHere() && 0 != iGr) {
           cpv.position(
               grEdgeSlotLog,
               gName,
               ++edgeSlotCopy,
               DDTranslation(
                   vecGrilleHeight()[iGr] / 2. - grEdgeSlotHeight() / 2., backCoolWidth / 2 - grEdgeSlotWidth() / 2., 0),
               DDRotation());
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << grEdgeSlotLog.name() << ":" << edgeSlotCopy << " positioned in " << gName
                                       << " at "
                                       << DDTranslation(vecGrilleHeight()[iGr] / 2. - grEdgeSlotHeight() / 2.,
                                                        backCoolWidth / 2 - grEdgeSlotWidth() / 2.,
                                                        0)
                                       << " with no rotation";
 #endif
           cpv.position(grEdgeSlotLog,
                        gName,
                        ++edgeSlotCopy,
                        DDTranslation(vecGrilleHeight()[iGr] / 2. - grEdgeSlotHeight() / 2.,
                                      -backCoolWidth / 2 + grEdgeSlotWidth() / 2.,
                                      0),
                        DDRotation());
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << grEdgeSlotLog.name() << ":" << edgeSlotCopy << " positioned in " << gName
                                       << " at "
                                       << DDTranslation(vecGrilleHeight()[iGr] / 2. - grEdgeSlotHeight() / 2.,
                                                        -backCoolWidth / 2 + grEdgeSlotWidth() / 2.,
                                                        0)
                                       << " with no rotation";
 #endif
         }
         if (0 != grilleHere()) {
           cpv.position(grilleLog, spmName(), iGr, gTra, DDRotation());
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << grilleLog.name() << ":" << iGr << " positioned in " << spmName() << " at "
                                       << gTra << " with no rotation";
 #endif
         }
         if ((0 != iGr % 2) && (0 != mBManifHere())) {
           cpv.position(mBManifLog,
                        spmName(),
                        iGr,
                        gTra - DDTranslation(-mBManifOutDiam() / 2. + vecGrilleHeight()[iGr] / 2.,
                                             manifCut,
                                             grilleThick() / 2. + 3 * mBManifOutDiam() / 2.),
                        myrot(mBManifName().name() + "R1", CLHEP::HepRotationX(90 * deg)));
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << mBManifLog.name() << ":" << iGr << " positioned in " << spmName() << " at "
                                       << (gTra - DDTranslation(-mBManifOutDiam() / 2. + vecGrilleHeight()[iGr] / 2.,
                                                                manifCut,
                                                                grilleThick() / 2. + 3 * mBManifOutDiam() / 2.))
                                       << " with rotation";
 #endif
           cpv.position(mBManifLog,
                        spmName(),
                        iGr - 1,
                        gTra - DDTranslation(-3 * mBManifOutDiam() / 2. + vecGrilleHeight()[iGr] / 2.,
                                             manifCut,
                                             grilleThick() / 2 + 3 * mBManifOutDiam() / 2.),
                        myrot(mBManifName().name() + "R2", CLHEP::HepRotationX(90 * deg)));
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << mBManifLog.name() << ":" << (iGr - 1) << " positioned in " << spmName()
                                       << " at "
                                       << (gTra - DDTranslation(-3 * mBManifOutDiam() / 2. + vecGrilleHeight()[iGr] / 2.,
                                                                manifCut,
                                                                grilleThick() / 2 + 3 * mBManifOutDiam() / 2.))
                                       << " with rotation";
 #endif
         }
       }
 
 
 
       DDSolid backCoolBarSolid(DDSolidFactory::box(
           backCoolBarName(), backCoolBarHeight() / 2., backCoolBarWidth() / 2., backCoolBarThick() / 2.));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << backCoolBarName() << " Box " << backCoolBarHeight() / 2. << ":"
                                  << backCoolBarWidth() / 2 << ":" << backCoolBarThick() / 2;
 #endif
       const DDLogicalPart backCoolBarLog(backCoolBarName(), backCoolBarMat(), backCoolBarSolid);
 
       DDSolid backCoolBarSSSolid(DDSolidFactory::box(
           backCoolBarSSName(), backCoolBarHeight() / 2., backCoolBarWidth() / 2., backCoolBarSSThick() / 2.));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << backCoolBarSSName() << " Box " << backCoolBarHeight() / 2. << ":"
                                  << backCoolBarWidth() / 2. << ":" << backCoolBarSSThick() / 2.;
 #endif
       const DDLogicalPart backCoolBarSSLog(backCoolBarSSName(), backCoolBarSSMat(), backCoolBarSSSolid);
       const DDTranslation backCoolBarSSTra(0, 0, 0);
       cpv.position(backCoolBarSSLog, backCoolBarName(), copyOne, backCoolBarSSTra, DDRotation());
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeomX") << backCoolBarSSLog.name() << ":" << copyOne << " positioned in " << backCoolBarName()
                                   << " at " << backCoolBarSSTra << " with no rotation";
 #endif
 
       DDSolid backCoolBarWaSolid(DDSolidFactory::box(
           backCoolBarWaName(), backCoolBarHeight() / 2., backCoolBarWidth() / 2., backCoolBarWaThick() / 2.));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << backCoolBarWaName() << " Box " << backCoolBarHeight() / 2. << ":"
                                  << backCoolBarWidth() / 2. << ":" << backCoolBarWaThick() / 2;
 #endif
       const DDLogicalPart backCoolBarWaLog(backCoolBarWaName(), backCoolBarWaMat(), backCoolBarWaSolid);
       const DDTranslation backCoolBarWaTra(0, 0, 0);
       cpv.position(backCoolBarWaLog, backCoolBarSSName(), copyOne, backCoolBarWaTra, DDRotation());
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeomX") << backCoolBarWaLog.name() << ":" << copyOne << " positioned in "
                                   << backCoolBarSSName() << " at " << backCoolBarWaTra << " with no rotation";
 #endif
 
 
 
       double thickVFE(0);
       for (unsigned int iLyr(0); iLyr != vecBackVFELyrThick().size(); ++iLyr) {
         thickVFE += vecBackVFELyrThick()[iLyr];
       }
       DDSolid backVFESolid(
           DDSolidFactory::box(backVFEName(), backCoolBarHeight() / 2., backCoolBarWidth() / 2., thickVFE / 2.));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << backVFEName() << " Box " << backCoolBarHeight() / 2. << ":"
                                  << backCoolBarWidth() / 2 << ":" << thickVFE / 2;
 #endif
       const DDLogicalPart backVFELog(backVFEName(), backVFEMat(), backVFESolid);
       DDTranslation offTra(0, 0, -thickVFE / 2);
       for (unsigned int iLyr(0); iLyr != vecBackVFELyrThick().size(); ++iLyr) {
         DDSolid backVFELyrSolid(DDSolidFactory::box(ddname(vecBackVFELyrName()[iLyr]),
                                                     backCoolBarHeight() / 2.,
                                                     backCoolBarWidth() / 2.,
                                                     vecBackVFELyrThick()[iLyr] / 2.));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeom") << ddname(vecBackVFELyrName()[iLyr]) << " Box " << backCoolBarHeight() / 2. << ":"
                                    << backCoolBarWidth() / 2. << ":" << vecBackVFELyrThick()[iLyr] / 2;
 #endif
         const DDLogicalPart backVFELyrLog(
             ddname(vecBackVFELyrName()[iLyr]), ddmat(vecBackVFELyrMat()[iLyr]), backVFELyrSolid);
         const DDTranslation backVFELyrTra(0, 0, vecBackVFELyrThick()[iLyr] / 2);
         cpv.position(backVFELyrLog, backVFEName(), copyOne, backVFELyrTra + offTra, DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << backVFELyrLog.name() << ":" << copyOne << " positioned in " << backVFEName()
                                     << " at " << (backVFELyrTra + offTra) << " with no rotation";
 #endif
         offTra += 2 * backVFELyrTra;
       }
 
 
 
       const double halfZCoolVFE(thickVFE + backCoolBarThick() / 2.);
       DDSolid backCoolVFESolid(
           DDSolidFactory::box(backCoolVFEName(), backCoolBarHeight() / 2., backCoolBarWidth() / 2., halfZCoolVFE));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << backCoolVFEName() << " Box " << backCoolBarHeight() / 2. << ":"
                                  << backCoolBarWidth() / 2. << ":" << halfZCoolVFE;
 #endif
       const DDLogicalPart backCoolVFELog(backCoolVFEName(), backCoolVFEMat(), backCoolVFESolid);
       if (0 != backCoolBarHere()) {
         cpv.position(backCoolBarLog, backCoolVFEName(), copyOne, DDTranslation(), DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << backCoolBarLog.name() << ":" << copyOne << " positioned in " << backCoolVFEName()
                                     << " at " << DDTranslation() << " with no rotation";
 #endif
       }
       if (0 != backCoolVFEHere()) {
         cpv.position(backVFELog,
                      backCoolVFEName(),
                      copyOne,
                      DDTranslation(0, 0, backCoolBarThick() / 2. + thickVFE / 2.),
                      DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << backVFELog.name() << ":" << copyOne << " positioned in " << backCoolVFEName()
                                     << " at " << DDTranslation(0, 0, backCoolBarThick() / 2. + thickVFE / 2.)
                                     << " with no rotation";
 #endif
       }
       cpv.position(backVFELog,
                    backCoolVFEName(),
                    copyTwo,
                    DDTranslation(0, 0, -backCoolBarThick() / 2. - thickVFE / 2.),
                    myrot(backVFEName().name() + "Flip", CLHEP::HepRotationX(180 * deg)));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeomX") << backVFELog.name() << ":" << copyTwo << " positioned in " << backCoolVFEName()
                                   << " at " << DDTranslation(0, 0, -backCoolBarThick() / 2. - thickVFE / 2.)
                                   << " with rotation";
 #endif
 
       unsigned int iCVFECopy(1);
       unsigned int iSep(0);
       unsigned int iNSec(0);
       const unsigned int nMisc(vecBackMiscThick().size() / 4);
       for (unsigned int iMod(0); iMod != 4; ++iMod) {
         const double pipeLength(vecGrilleZOff()[2 * iMod + 1] - vecGrilleZOff()[2 * iMod] - grilleThick() - 3 * mm);
 
         const double pipeZPos(vecGrilleZOff()[2 * iMod + 1] - pipeLength / 2 - 1.5 * mm);
 
         // accumulate total height of parent volume
 
         double backCoolHeight(backCoolBarHeight() + mBCoolTubeOutDiam());
         for (unsigned int iMisc(0); iMisc != nMisc; ++iMisc) {
           backCoolHeight += vecBackMiscThick()[iMod * nMisc + iMisc];
         }
         double bottomThick(mBCoolTubeOutDiam());
         for (unsigned int iMB(0); iMB != vecMBLyrThick().size(); ++iMB) {
           backCoolHeight += vecMBLyrThick()[iMB];
           bottomThick += vecMBLyrThick()[iMB];
         }
 
         DDName backCName(ddname(vecBackCoolName()[iMod]));
         const double halfZBCool((pipeLength - 2 * mBManifOutDiam() - grilleZSpace()) / 2);
         DDSolid backCoolSolid(DDSolidFactory::box(backCName, backCoolHeight / 2., backCoolWidth / 2., halfZBCool));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeom") << backCName << " Box " << backCoolHeight / 2. << ":" << backCoolWidth / 2. << ":"
                                    << halfZBCool;
 #endif
         const DDLogicalPart backCoolLog(backCName, spmMat(), backCoolSolid);
 
         const DDTranslation bCoolTra(
             -realBPthick / 2 + backCoolHeight / 2 - vecGrilleHeight()[2 * iMod],
             deltaY,
             vecGrilleZOff()[2 * iMod] + grilleThick() + grilleZSpace() + halfZBCool - backSideLength() / 2);
         if (0 != backCoolHere()) {
           cpv.position(backCoolLog, spmName(), iMod + 1, outtra + backPlateTra + bCoolTra, DDRotation());
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << backCoolLog.name() << ":" << (iMod + 1) << " positioned in " << spmName()
                                       << " at " << (outtra + backPlateTra + bCoolTra) << " with no rotation";
 #endif
         }
         //===
         const double backCoolTankHeight(backCoolBarHeight());  // - backBracketHeight() ) ;
 
         const double halfZTank(halfZBCool - 5 * cm);
 
         DDName bTankName(ddname(backCoolTankName() + std::to_string(iMod + 1)));
         DDSolid backCoolTankSolid(
             DDSolidFactory::box(bTankName, backCoolTankHeight / 2., backCoolTankWidth() / 2., halfZTank));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeom") << bTankName << " Box " << backCoolTankHeight / 2. << ":" << backCoolTankWidth() / 2.
                                    << ":" << halfZTank;
 #endif
         const DDLogicalPart backCoolTankLog(bTankName, backCoolTankMat(), backCoolTankSolid);
         if (0 != backCoolTankHere()) {
           cpv.position(backCoolTankLog,
                        backCName,
                        copyOne,
                        DDTranslation(-backCoolHeight / 2 + backCoolTankHeight / 2. + bottomThick,
                                      backCoolBarWidth() / 2. + backCoolTankWidth() / 2.,
                                      0),
                        DDRotation());
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << backCoolTankLog.name() << ":" << copyOne << " positioned in " << backCName
                                       << " at "
                                       << DDTranslation(-backCoolHeight / 2 + backCoolTankHeight / 2. + bottomThick,
                                                        backCoolBarWidth() / 2. + backCoolTankWidth() / 2.,
                                                        0)
                                       << " with no rotation";
 #endif
         }
 
         DDName bTankWaName(ddname(backCoolTankWaName() + std::to_string(iMod + 1)));
         DDSolid backCoolTankWaSolid(DDSolidFactory::box(bTankWaName,
                                                         backCoolTankHeight / 2. - backCoolTankThick() / 2.,
                                                         backCoolTankWaWidth() / 2.,
                                                         halfZTank - backCoolTankThick() / 2.));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeom") << bTankWaName << " Box " << (backCoolTankHeight / 2. - backCoolTankThick() / 2.)
                                    << ":" << backCoolTankWaWidth() / 2. << ":"
                                    << (halfZTank - backCoolTankThick() / 2.);
 #endif
         const DDLogicalPart backCoolTankWaLog(bTankWaName, backCoolTankWaMat(), backCoolTankWaSolid);
         cpv.position(backCoolTankWaLog, bTankName, copyOne, DDTranslation(0, 0, 0), DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << backCoolTankWaLog.name() << ":" << copyOne << " positioned in " << bTankName
                                     << " at " << DDTranslation(0, 0, 0) << " with no rotation";
 #endif
 
         DDName bBracketName(ddname(backBracketName() + std::to_string(iMod + 1)));
         DDSolid backBracketSolid(
             DDSolidFactory::box(bBracketName, backBracketHeight() / 2., backCoolTankWidth() / 2., halfZTank));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeom") << bBracketName << " Box " << backBracketHeight() / 2. << ":"
                                    << backCoolTankWidth() / 2. << ":" << halfZTank;
 #endif
         const DDLogicalPart backBracketLog(bBracketName, backBracketMat(), backBracketSolid);
         if (0 != backCoolTankHere()) {
           cpv.position(backBracketLog,
                        backCName,
                        copyOne,
                        DDTranslation(backCoolBarHeight() - backCoolHeight / 2. - backBracketHeight() / 2. + bottomThick,
                                      -backCoolBarWidth() / 2. - backCoolTankWidth() / 2.,
                                      0),
                        DDRotation());
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << backBracketLog.name() << ":" << copyOne << " positioned in " << backCName
                                       << " at "
                                       << DDTranslation(backCoolBarHeight() - backCoolHeight / 2. -
                                                            backBracketHeight() / 2. + bottomThick,
                                                        -backCoolBarWidth() / 2. - backCoolTankWidth() / 2.,
                                                        0)
                                       << " with no rotation";
 #endif
         }
 
         /*   cpv.position( backBracketLog,
         backCName, 
         copyTwo, 
         DDTranslation( backCoolBarHeight() - backCoolHeight/2. - backBracketHeight()/2.,
                    backCoolBarWidth()/2. + backCoolTankWidth()/2., 0),
                    DDRotation() ) ;*/
 
         //===
 
         DDTranslation bSumTra(backCoolBarHeight() - backCoolHeight / 2. + bottomThick, 0, 0);
         for (unsigned int j(0); j != nMisc; ++j)  // loop over miscellaneous layers
         {
           const DDName bName(ddname(vecBackMiscName()[iMod * nMisc + j]));
 
           DDSolid bSolid(DDSolidFactory::box(bName,
                                              vecBackMiscThick()[iMod * nMisc + j] / 2,
                                              backCoolBarWidth() / 2. + backCoolTankWidth(),
                                              halfZBCool));
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeom") << bName << " Box " << vecBackMiscThick()[iMod * nMisc + j] / 2 << ":"
                                      << backCoolBarWidth() / 2. + backCoolTankWidth() << ":" << halfZBCool;
 #endif
 
           const DDLogicalPart bLog(bName, ddmat(vecBackMiscMat()[iMod * nMisc + j]), bSolid);
 
           const DDTranslation bTra(vecBackMiscThick()[iMod * nMisc + j] / 2, 0 * mm, 0 * mm);
 
           if (0 != backMiscHere()) {
             cpv.position(bLog, backCName, copyOne, bSumTra + bTra, DDRotation());
 #ifdef EDM_ML_DEBUG
             edm::LogVerbatim("EBGeomX") << bLog.name() << ":" << copyOne << " positioned in " << backCName << " at "
                                         << (bSumTra + bTra) << " with no rotation";
 #endif
           }
           bSumTra += 2 * bTra;
         }
 
         const double bHalfWidth(backCoolBarWidth() / 2. + backCoolTankWidth());
 
         if (0 != mBLyrHere()) {
           DDTranslation mTra(-backCoolHeight / 2. + mBCoolTubeOutDiam(), 0, 0);
           for (unsigned int j(0); j != vecMBLyrThick().size(); ++j)  // loop over MB layers
           {
             const DDName mName(ddname(vecMBLyrName()[j] + "_" + std::to_string(iMod + 1)));
 
             DDSolid mSolid(DDSolidFactory::box(mName, vecMBLyrThick()[j] / 2, bHalfWidth, halfZBCool));
 #ifdef EDM_ML_DEBUG
             edm::LogVerbatim("EBGeom") << mName << " Box " << vecMBLyrThick()[j] / 2 << ":" << bHalfWidth << ":"
                                        << halfZBCool;
 #endif
 
             const DDLogicalPart mLog(mName, ddmat(vecMBLyrMat()[j]), mSolid);
 
             mTra += DDTranslation(vecMBLyrThick()[j] / 2.0, 0 * mm, 0 * mm);
             cpv.position(mLog, backCName, copyOne, mTra, DDRotation());
 #ifdef EDM_ML_DEBUG
             edm::LogVerbatim("EBGeomX") << mLog.name() << ":" << copyOne << " positioned in " << backCName << " at "
                                         << mTra << " with no rotation";
 #endif
             mTra += DDTranslation(vecMBLyrThick()[j] / 2.0, 0 * mm, 0 * mm);
           }
         }
 
         if (0 != mBCoolTubeHere()) {
           const DDName mBName(ddname(mBCoolTubeName() + "_" + std::to_string(iMod + 1)));
 
           DDSolid mBCoolTubeSolid(
               DDSolidFactory::tubs(mBName, halfZBCool, 0, mBCoolTubeOutDiam() / 2, 0 * deg, 360 * deg));
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeom") << mBName << " Tubs " << halfZBCool << ":0:" << mBCoolTubeOutDiam() / 2
                                      << ":0:360";
 #endif
           const DDLogicalPart mBLog(mBName, mBCoolTubeMat(), mBCoolTubeSolid);
 
           const DDName mBWaName(ddname(mBCoolTubeName() + "Wa_" + std::to_string(iMod + 1)));
           DDSolid mBCoolTubeWaSolid(
               DDSolidFactory::tubs(mBWaName, halfZBCool, 0, mBCoolTubeInnDiam() / 2, 0 * deg, 360 * deg));
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeom") << mBWaName << " Tubs " << halfZBCool << ":0:" << mBCoolTubeInnDiam() / 2
                                      << ":0:360";
 #endif
           const DDLogicalPart mBWaLog(mBWaName, backPipeWaterMat(), mBCoolTubeWaSolid);
           cpv.position(mBWaLog, mBName, copyOne, DDTranslation(0, 0, 0), DDRotation());
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << mBWaLog.name() << ":" << copyOne << " positioned in " << mBName << " at "
                                       << DDTranslation(0, 0, 0) << " with no rotation";
 #endif
           for (unsigned int j(0); j != mBCoolTubeNum(); ++j)  // loop over all MB cooling circuits
           {
             cpv.position(
                 mBLog,
                 backCName,
                 2 * j + 1,
                 DDTranslation(
                     -backCoolHeight / 2.0 + mBCoolTubeOutDiam() / 2., -bHalfWidth + (j + 1) * bHalfWidth / 5, 0),
                 DDRotation());
 #ifdef EDM_ML_DEBUG
             edm::LogVerbatim("EBGeomX") << mBLog.name() << ":" << (2 * j + 1) << " positioned in " << backCName
                                         << " at "
                                         << DDTranslation(-backCoolHeight / 2.0 + mBCoolTubeOutDiam() / 2.,
                                                          -bHalfWidth + (j + 1) * bHalfWidth / 5,
                                                          0)
                                         << " with no rotation";
 #endif
           }
         }
 
         if (0 != backPipeHere() && 0 != iMod) {
           DDName bPipeName(ddname(backPipeName() + "_" + std::to_string(iMod + 1)));
           DDName bInnerName(ddname(backPipeName() + "_H2O_" + std::to_string(iMod + 1)));
 
           DDSolid backPipeSolid(
               DDSolidFactory::tubs(bPipeName, pipeLength / 2, 0 * mm, vecBackPipeDiam()[iMod] / 2, 0 * deg, 360 * deg));
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeom") << bPipeName << " Tubs " << pipeLength / 2 << ":0:" << vecBackPipeDiam()[iMod] / 2
                                      << ":0:360";
 #endif
 
           DDSolid backInnerSolid(DDSolidFactory::tubs(bInnerName,
                                                       pipeLength / 2,
                                                       0 * mm,
                                                       vecBackPipeDiam()[iMod] / 2 - vecBackPipeThick()[iMod],
                                                       0 * deg,
                                                       360 * deg));
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeom") << bInnerName << " Tubs " << pipeLength / 2
                                      << ":0:" << vecBackPipeDiam()[iMod] / 2 - vecBackPipeThick()[iMod] << ":0:360";
 #endif
 
           const DDLogicalPart backPipeLog(bPipeName, backPipeMat(), backPipeSolid);
 
           const DDLogicalPart backInnerLog(bInnerName, backPipeWaterMat(), backInnerSolid);
 
           const DDTranslation bPipeTra1(
               backXOff() + backSideHeight() - 0.7 * vecBackPipeDiam()[iMod],
               backYOff() + backPlateWidth() / 2 - backSideWidth() - 0.7 * vecBackPipeDiam()[iMod],
               pipeZPos);
 
           cpv.position(backPipeLog, spmName(), copyOne, bPipeTra1, DDRotation());
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << backPipeLog.name() << ":" << copyOne << " positioned in " << spmName()
                                       << " at " << bPipeTra1 << " with no rotation";
 #endif
 
           const DDTranslation bPipeTra2(bPipeTra1.x(),
                                         backYOff() - backPlateWidth() / 2 + backSideWidth() + vecBackPipeDiam()[iMod],
                                         bPipeTra1.z());
 
           cpv.position(backPipeLog, spmName(), copyTwo, bPipeTra2, DDRotation());
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << backPipeLog.name() << ":" << copyTwo << " positioned in " << spmName()
                                       << " at " << bPipeTra2 << " with no rotation";
 #endif
           cpv.position(backInnerLog, bPipeName, copyOne, DDTranslation(), DDRotation());
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << backInnerLog.name() << ":" << copyOne << " positioned in " << bPipeName
                                       << " at " << DDTranslation() << " with no rotation";
 #endif
         }
 
         //=================================================
 
         if (0 != dryAirTubeHere()) {
           DDName dryAirTubName(ddname(dryAirTubeName() + std::to_string(iMod + 1)));
 
           DDSolid dryAirTubeSolid(DDSolidFactory::tubs(
               dryAirTubName, pipeLength / 2, dryAirTubeInnDiam() / 2, dryAirTubeOutDiam() / 2, 0 * deg, 360 * deg));
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeom") << dryAirTubName << " Tubs " << pipeLength / 2 << ":" << dryAirTubeInnDiam() / 2
                                      << ":" << dryAirTubeOutDiam() / 2 << ":0:360";
 #endif
 
           const DDLogicalPart dryAirTubeLog(dryAirTubName, dryAirTubeMat(), dryAirTubeSolid);
 
           const DDTranslation dryAirTubeTra1(
               backXOff() + backSideHeight() - 0.7 * dryAirTubeOutDiam() - vecBackPipeDiam()[iMod],
               backYOff() + backPlateWidth() / 2 - backSideWidth() - 1.2 * dryAirTubeOutDiam(),
               pipeZPos);
 
           cpv.position(dryAirTubeLog, spmName(), copyOne, dryAirTubeTra1, DDRotation());
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << dryAirTubeLog.name() << ":" << copyOne << " positioned in " << spmName()
                                       << " at " << dryAirTubeTra1 << " with no rotation";
 #endif
 
           const DDTranslation dryAirTubeTra2(
               dryAirTubeTra1.x(),
               backYOff() - backPlateWidth() / 2 + backSideWidth() + 0.7 * dryAirTubeOutDiam(),
               dryAirTubeTra1.z());
 
           cpv.position(dryAirTubeLog, spmName(), copyTwo, dryAirTubeTra2, DDRotation());
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << dryAirTubeLog.name() << ":" << copyTwo << " positioned in " << spmName()
                                       << " at " << dryAirTubeTra2 << " with no rotation";
 #endif
         }
         //++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 
 
         DDTranslation cTra(backCoolBarHeight() / 2. - backCoolHeight / 2. + bottomThick, 0, -halfZTank + halfZCoolVFE);
         const unsigned int numSec(static_cast<unsigned int>(vecBackCoolNSec()[iMod]));
         for (unsigned int jSec(0); jSec != numSec; ++jSec) {
           const unsigned int nMax(static_cast<unsigned int>(vecBackCoolNPerSec()[iNSec++]));
           for (unsigned int iBar(0); iBar != nMax; ++iBar) {
             cpv.position(backCoolVFELog, backCName, iCVFECopy++, cTra, DDRotation());
 #ifdef EDM_ML_DEBUG
             edm::LogVerbatim("EBGeomX") << backCoolVFELog.name() << ":" << iCVFECopy << " positioned in " << backCName
                                         << " at " << cTra << " with no rotation";
 #endif
             cTra += DDTranslation(0, 0, backCBStdSep());
           }
           cTra -= DDTranslation(0, 0, backCBStdSep());  // backspace to previous
           if (jSec != numSec - 1)
             cTra += DDTranslation(0, 0, vecBackCoolSecSep()[iSep++]);  // now take atypical step
         }
       }
 
 
 
       double patchHeight(0);
       for (unsigned int iPatch(0); iPatch != vecPatchPanelThick().size(); ++iPatch) {
         patchHeight += vecPatchPanelThick()[iPatch];
       }
 
       DDSolid patchSolid(DDSolidFactory::box(patchPanelName(),
                                              patchHeight / 2.,
                                              backCoolBarWidth() / 2.,
                                              (vecSpmZPts().back() - vecGrilleZOff().back() - grilleThick()) / 2));
 #ifdef EDM_ML_DEBUG
       edm::LogVerbatim("EBGeom") << patchPanelName() << " Box " << patchHeight / 2. << ":" << backCoolBarWidth() / 2.
                                  << ":" << (vecSpmZPts().back() - vecGrilleZOff().back() - grilleThick()) / 2;
 #endif
 
       const std::vector<double>& patchParms(patchSolid.parameters());
 
       const DDLogicalPart patchLog(patchPanelName(), spmMat(), patchSolid);
 
       const DDTranslation patchTra(backXOff() + 4 * mm, 0 * mm, vecGrilleZOff().back() + grilleThick() + patchParms[2]);
       if (0 != patchPanelHere()) {
         cpv.position(patchLog, spmName(), copyOne, patchTra, DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << patchLog.name() << ":" << copyOne << " positioned in " << spmName() << " at "
                                     << patchTra << " with no rotation";
 #endif
       }
       DDTranslation pTra(-patchParms[0], 0, 0);
 
       for (unsigned int j(0); j != vecPatchPanelNames().size(); ++j) {
         const DDName pName(ddname(vecPatchPanelNames()[j]));
 
         DDSolid pSolid(DDSolidFactory::box(pName, vecPatchPanelThick()[j] / 2., patchParms[1], patchParms[2]));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeom") << pName << " Box " << vecPatchPanelThick()[j] / 2. << ":" << patchParms[1] << ":"
                                    << patchParms[2];
 #endif
         const DDLogicalPart pLog(pName, ddmat(vecPatchPanelMat()[j]), pSolid);
 
         pTra += DDTranslation(vecPatchPanelThick()[j] / 2, 0 * mm, 0 * mm);
 
         cpv.position(pLog, patchPanelName(), copyOne, pTra, DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << pLog.name() << ":" << copyOne << " positioned in " << patchPanelName() << " at "
                                     << pTra << " with no rotation";
 #endif
         pTra += DDTranslation(vecPatchPanelThick()[j] / 2, 0 * mm, 0 * mm);
       }
 
 
       if (0 != pincerRodHere()) {
         // Make hierarchy of rods, envelopes, blocks, shims, and cutouts
 
         DDSolid rodSolid(
             DDSolidFactory::box(pincerRodName(), pincerEnvWidth() / 2., pincerEnvHeight() / 2., ilyLength / 2));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeom") << pincerRodName() << " Box " << pincerEnvWidth() / 2. << ":"
                                    << pincerEnvHeight() / 2. << ":" << ilyLength / 2;
 #endif
         const DDLogicalPart rodLog(pincerRodName(), pincerRodMat(), rodSolid);
 
         DDSolid envSolid(
             DDSolidFactory::box(pincerEnvName(), pincerEnvWidth() / 2., pincerEnvHeight() / 2., pincerEnvLength() / 2));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeom") << pincerEnvName() << " Box " << pincerEnvWidth() / 2. << ":"
                                    << pincerEnvHeight() / 2. << ":" << pincerEnvLength() / 2;
 #endif
         const DDLogicalPart envLog(pincerEnvName(), pincerEnvMat(), envSolid);
         const std::vector<double>& envParms(envSolid.parameters());
 
         DDSolid blkSolid(
             DDSolidFactory::box(pincerBlkName(), pincerEnvWidth() / 2., pincerEnvHeight() / 2., pincerBlkLength() / 2));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeom") << pincerBlkName() << " Box " << pincerEnvWidth() / 2. << ":"
                                    << pincerEnvHeight() / 2. << ":" << pincerBlkLength() / 2;
 #endif
         const DDLogicalPart blkLog(pincerBlkName(), pincerBlkMat(), blkSolid);
         const std::vector<double>& blkParms(blkSolid.parameters());
         cpv.position(blkLog,
                      pincerEnvName(),
                      copyOne,
                      DDTranslation(0, 0, pincerEnvLength() / 2 - pincerBlkLength() / 2),
                      DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << blkLog.name() << ":" << copyOne << " positioned in " << pincerEnvName() << " at "
                                     << DDTranslation(0, 0, pincerEnvLength() / 2 - pincerBlkLength() / 2)
                                     << " with no rotation";
 #endif
 
         DDSolid cutSolid(
             DDSolidFactory::box(pincerCutName(), pincerCutWidth() / 2., pincerCutHeight() / 2., pincerBlkLength() / 2));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeom") << pincerCutName() << " Box " << pincerCutWidth() / 2. << ":"
                                    << pincerCutHeight() / 2 << ":" << pincerBlkLength() / 2;
 #endif
         const DDLogicalPart cutLog(pincerCutName(), pincerCutMat(), cutSolid);
         const std::vector<double>& cutParms(cutSolid.parameters());
         cpv.position(
             cutLog,
             pincerBlkName(),
             copyOne,
             DDTranslation(
                 +blkParms[0] - cutParms[0] - pincerShim1Width() + pincerShim2Width(), -blkParms[1] + cutParms[1], 0),
             DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << cutLog.name() << ":" << copyOne << " positioned in " << pincerBlkName() << " at "
                                     << DDTranslation(
                                            blkParms[0] - cutParms[0] - pincerShim1Width() + pincerShim2Width(),
                                            -blkParms[1] + cutParms[1],
                                            0)
                                     << " with no rotation";
 #endif
 
         DDSolid shim2Solid(DDSolidFactory::box(
             pincerShim2Name(), pincerShim2Width() / 2., pincerShimHeight() / 2., pincerBlkLength() / 2));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeom") << pincerShim2Name() << " Box " << pincerShim2Width() / 2. << ":"
                                    << pincerShimHeight() / 2. << ":" << pincerBlkLength() / 2;
 #endif
         const DDLogicalPart shim2Log(pincerShim2Name(), pincerShimMat(), shim2Solid);
         const std::vector<double>& shim2Parms(shim2Solid.parameters());
         cpv.position(shim2Log,
                      pincerCutName(),
                      copyOne,
                      DDTranslation(+cutParms[0] - shim2Parms[0], -cutParms[1] + shim2Parms[1], 0),
                      DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << shim2Log.name() << ":" << copyOne << " positioned in " << pincerCutName()
                                     << " at "
                                     << DDTranslation(+cutParms[0] - shim2Parms[0], -cutParms[1] + shim2Parms[1], 0)
                                     << " with no rotation";
 #endif
 
         DDSolid shim1Solid(DDSolidFactory::box(pincerShim1Name(),
                                                pincerShim1Width() / 2.,
                                                pincerShimHeight() / 2.,
                                                (pincerEnvLength() - pincerBlkLength()) / 2));
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeom") << pincerShim1Name() << " Box " << pincerShim1Width() / 2. << ":"
                                    << pincerShimHeight() / 2. << ":" << (pincerEnvLength() - pincerBlkLength()) / 2;
 #endif
 
         const DDLogicalPart shim1Log(pincerShim1Name(), pincerShimMat(), shim1Solid);
         const std::vector<double>& shim1Parms(shim1Solid.parameters());
         cpv.position(
             shim1Log,
             pincerEnvName(),
             copyOne,
             DDTranslation(+envParms[0] - shim1Parms[0], -envParms[1] + shim1Parms[1], -envParms[2] + shim1Parms[2]),
             DDRotation());
 #ifdef EDM_ML_DEBUG
         edm::LogVerbatim("EBGeomX") << shim1Log.name() << ":" << copyOne << " positioned in " << pincerEnvName()
                                     << " at "
                                     << DDTranslation(+envParms[0] - shim1Parms[0],
                                                      -envParms[1] + shim1Parms[1],
                                                      -envParms[2] + shim1Parms[2])
                                     << " with no rotation";
 #endif
         for (unsigned int iEnv(0); iEnv != vecPincerEnvZOff().size(); ++iEnv) {
           cpv.position(envLog,
                        pincerRodName(),
                        1 + iEnv,
                        DDTranslation(0, 0, -ilyLength / 2. + vecPincerEnvZOff()[iEnv] - pincerEnvLength() / 2.),
                        DDRotation());
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << envLog.name() << ":" << (1 + iEnv) << " positioned in " << pincerRodName()
                                       << " at "
                                       << DDTranslation(
                                              0, 0, -ilyLength / 2. + vecPincerEnvZOff()[iEnv] - pincerEnvLength() / 2.)
                                       << " with no rotation";
 #endif
         }
 
         // Place the rods
         //   const double radius ( fawRadOff() - pincerEnvHeight()/2 -1*mm ) ;
         const double radius(ilyRMin - pincerEnvHeight() / 2 - 1 * mm);
 
         const DDName xilyName(ddname(ilyName() + std::to_string(vecIlyMat().size() - 1)));
 
         for (unsigned int iRod(0); iRod != vecPincerRodAzimuth().size(); ++iRod) {
           const DDTranslation rodTra(
               radius * cos(vecPincerRodAzimuth()[iRod]), radius * sin(vecPincerRodAzimuth()[iRod]), 0);
 
           cpv.position(rodLog,
                        xilyName,
                        1 + iRod,
                        rodTra,
                        myrot(pincerRodName().name() + std::to_string(iRod),
                              CLHEP::HepRotationZ(90 * deg + vecPincerRodAzimuth()[iRod])));
 #ifdef EDM_ML_DEBUG
           edm::LogVerbatim("EBGeomX") << rodLog.name() << ":" << (1 + iRod) << " positioned in " << xilyName << " at "
                                       << rodTra << " with rotation";
 #endif
         }
       }
     }
   }
 
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("EcalGeom") << "******** DDEcalBarrelAlgo test: end it...";
 #endif
 }

◆ fawDelPhi()

double DDEcalBarrelNewAlgo::fawDelPhi ( ) const

inline

Definition at line 266 of file DDEcalBarrelNewAlgo.cc.

References m_FawDelPhi.

Referenced by execute().

266 { return m_FawDelPhi; }

DDEcalBarrelNewAlgo::m_FawDelPhi

double m_FawDelPhi

Definition: DDEcalBarrelNewAlgo.cc:641

◆ fawHere()

double DDEcalBarrelNewAlgo::fawHere ( ) const

inline

Definition at line 256 of file DDEcalBarrelNewAlgo.cc.

References m_FawHere.

Referenced by execute().

256 { return m_FawHere; }

DDEcalBarrelNewAlgo::m_FawHere

double m_FawHere

Definition: DDEcalBarrelNewAlgo.cc:632

◆ fawName()

DDName DDEcalBarrelNewAlgo::fawName ( ) const

inline

Definition at line 255 of file DDEcalBarrelNewAlgo.cc.

References ddname(), and m_FawName.

Referenced by execute().

255 { return ddname(m_FawName); }

DDEcalBarrelNewAlgo::ddname

DDName ddname(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3738

DDEcalBarrelNewAlgo::m_FawName

std::string m_FawName

Definition: DDEcalBarrelNewAlgo.cc:631

◆ fawPhiOff()

double DDEcalBarrelNewAlgo::fawPhiOff ( ) const

inline

Definition at line 265 of file DDEcalBarrelNewAlgo.cc.

References m_FawPhiOff.

Referenced by execute().

265 { return m_FawPhiOff; }

DDEcalBarrelNewAlgo::m_FawPhiOff

double m_FawPhiOff

Definition: DDEcalBarrelNewAlgo.cc:640

◆ fawPhiRot()

double DDEcalBarrelNewAlgo::fawPhiRot ( ) const

inline

Definition at line 267 of file DDEcalBarrelNewAlgo.cc.

References m_FawPhiRot.

Referenced by execute().

267 { return m_FawPhiRot; }

DDEcalBarrelNewAlgo::m_FawPhiRot

double m_FawPhiRot

Definition: DDEcalBarrelNewAlgo.cc:642

◆ fawRadOff()

double DDEcalBarrelNewAlgo::fawRadOff ( ) const

inline

Definition at line 268 of file DDEcalBarrelNewAlgo.cc.

References m_FawRadOff.

Referenced by execute().

268 { return m_FawRadOff; }

DDEcalBarrelNewAlgo::m_FawRadOff

double m_FawRadOff

Definition: DDEcalBarrelNewAlgo.cc:643

◆ grEdgeSlotHeight()

double DDEcalBarrelNewAlgo::grEdgeSlotHeight ( ) const

inline

Definition at line 308 of file DDEcalBarrelNewAlgo.cc.

References m_GrEdgeSlotHeight.

Referenced by execute().

308 { return m_GrEdgeSlotHeight; }

DDEcalBarrelNewAlgo::m_GrEdgeSlotHeight

double DDEcalBarrelNewAlgo::grEdgeSlotWidth ( ) const

inline

Definition at line 309 of file DDEcalBarrelNewAlgo.cc.

References m_GrEdgeSlotWidth.

Referenced by execute().

309 { return m_GrEdgeSlotWidth; }

DDEcalBarrelNewAlgo::m_GrEdgeSlotWidth

double DDEcalBarrelNewAlgo::gridThick ( ) const

inline

Definition at line 273 of file DDEcalBarrelNewAlgo.cc.

References m_GridThick.

Referenced by execute().

273 { return m_GridThick; }

DDEcalBarrelNewAlgo::m_GridThick

double m_GridThick

Definition: DDEcalBarrelNewAlgo.cc:648

◆ grilleHere()

double DDEcalBarrelNewAlgo::grilleHere ( ) const

inline

Definition at line 298 of file DDEcalBarrelNewAlgo.cc.

References m_GrilleHere.

Referenced by execute().

298 { return m_GrilleHere; }

DDEcalBarrelNewAlgo::m_GrilleHere

double m_GrilleHere

Definition: DDEcalBarrelNewAlgo.cc:673

◆ grilleMat()

DDMaterial DDEcalBarrelNewAlgo::grilleMat ( ) const

inline

Definition at line 301 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_GrilleMat.

Referenced by execute().

301 { return ddmat(m_GrilleMat); }

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

DDEcalBarrelNewAlgo::m_GrilleMat

std::string m_GrilleMat

Definition: DDEcalBarrelNewAlgo.cc:677

◆ grilleName()

const std::string& DDEcalBarrelNewAlgo::grilleName ( ) const

inline

Definition at line 296 of file DDEcalBarrelNewAlgo.cc.

References m_GrilleName.

Referenced by execute().

296 { return m_GrilleName; }

DDEcalBarrelNewAlgo::m_GrilleName

std::string m_GrilleName

Definition: DDEcalBarrelNewAlgo.cc:672

◆ grilleThick()

double DDEcalBarrelNewAlgo::grilleThick ( ) const

inline

Definition at line 297 of file DDEcalBarrelNewAlgo.cc.

References m_GrilleThick.

Referenced by execute().

297 { return m_GrilleThick; }

DDEcalBarrelNewAlgo::m_GrilleThick

double m_GrilleThick

Definition: DDEcalBarrelNewAlgo.cc:674

DDMaterial DDEcalBarrelNewAlgo::grMidSlotMat ( ) const

inline

Definition at line 311 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_GrMidSlotMat.

Referenced by execute().

311 { return ddmat(m_GrMidSlotMat); }

DDEcalBarrelNewAlgo::m_GrMidSlotMat

std::string m_GrMidSlotMat

Definition: DDEcalBarrelNewAlgo.cc:688

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

◆ grMidSlotName()

const std::string& DDEcalBarrelNewAlgo::grMidSlotName ( ) const

inline

Definition at line 310 of file DDEcalBarrelNewAlgo.cc.

References m_GrMidSlotName.

Referenced by execute().

310 { return m_GrMidSlotName; }

DDEcalBarrelNewAlgo::m_GrMidSlotName

std::string m_GrMidSlotName

Definition: DDEcalBarrelNewAlgo.cc:687

◆ grMidSlotWidth()

double DDEcalBarrelNewAlgo::grMidSlotWidth ( ) const

inline

Definition at line 313 of file DDEcalBarrelNewAlgo.cc.

References m_GrMidSlotWidth.

Referenced by execute().

313 { return m_GrMidSlotWidth; }

DDEcalBarrelNewAlgo::m_GrMidSlotWidth

double m_GrMidSlotWidth

Definition: DDEcalBarrelNewAlgo.cc:690

◆ grMidSlotXOff()

double DDEcalBarrelNewAlgo::grMidSlotXOff ( ) const

inline

Definition at line 314 of file DDEcalBarrelNewAlgo.cc.

References m_GrMidSlotXOff.

Referenced by execute().

314 { return m_GrMidSlotXOff; }

DDEcalBarrelNewAlgo::m_GrMidSlotXOff

double m_GrMidSlotXOff

Definition: DDEcalBarrelNewAlgo.cc:691

◆ hawRCutDelY()

double DDEcalBarrelNewAlgo::hawRCutDelY ( ) const

inline

Definition at line 261 of file DDEcalBarrelNewAlgo.cc.

References m_HawRCutDelY.

Referenced by execute().

261 { return m_HawRCutDelY; }

DDEcalBarrelNewAlgo::m_HawRCutDelY

double m_HawRCutDelY

Definition: DDEcalBarrelNewAlgo.cc:637

◆ hawRCutY()

double DDEcalBarrelNewAlgo::hawRCutY ( ) const

inline

Definition at line 259 of file DDEcalBarrelNewAlgo.cc.

References m_HawRCutY.

Referenced by execute().

259 { return m_HawRCutY; }

DDEcalBarrelNewAlgo::m_HawRCutY

double m_HawRCutY

Definition: DDEcalBarrelNewAlgo.cc:635

◆ hawRCutZ()

double DDEcalBarrelNewAlgo::hawRCutZ ( ) const

inline

Definition at line 260 of file DDEcalBarrelNewAlgo.cc.

References m_HawRCutZ.

Referenced by execute().

260 { return m_HawRCutZ; }

DDEcalBarrelNewAlgo::m_HawRCutZ

double m_HawRCutZ

Definition: DDEcalBarrelNewAlgo.cc:636

◆ hawRHBIG()

double DDEcalBarrelNewAlgo::hawRHBIG ( ) const

inline

Definition at line 257 of file DDEcalBarrelNewAlgo.cc.

References m_HawRHBIG.

Referenced by execute().

257 { return m_HawRHBIG; }

DDEcalBarrelNewAlgo::m_HawRHBIG

double m_HawRHBIG

Definition: DDEcalBarrelNewAlgo.cc:633

◆ hawRhsml()

double DDEcalBarrelNewAlgo::hawRhsml ( ) const

inline

Definition at line 258 of file DDEcalBarrelNewAlgo.cc.

References m_HawRhsml.

Referenced by execute().

258 { return m_HawRhsml; }

DDEcalBarrelNewAlgo::m_HawRhsml

double m_HawRhsml

Definition: DDEcalBarrelNewAlgo.cc:634

◆ hawRName()

DDName DDEcalBarrelNewAlgo::hawRName ( ) const

inline

Definition at line 254 of file DDEcalBarrelNewAlgo.cc.

References ddname(), and m_HawRName.

Referenced by execute().

254 { return ddname(m_HawRName); }

DDEcalBarrelNewAlgo::ddname

DDName ddname(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3738

DDEcalBarrelNewAlgo::m_HawRName

std::string m_HawRName

Definition: DDEcalBarrelNewAlgo.cc:630

◆ hawYOffCry()

double DDEcalBarrelNewAlgo::hawYOffCry ( ) const

inline

Definition at line 262 of file DDEcalBarrelNewAlgo.cc.

References m_HawYOffCry.

Referenced by execute().

262 { return m_HawYOffCry; }

DDEcalBarrelNewAlgo::m_HawYOffCry

double m_HawYOffCry

Definition: DDEcalBarrelNewAlgo.cc:638

◆ idNameSpace()

const std::string& DDEcalBarrelNewAlgo::idNameSpace ( ) const

inline

Definition at line 64 of file DDEcalBarrelNewAlgo.cc.

References m_idNameSpace.

64 { return m_idNameSpace; }

DDEcalBarrelNewAlgo::m_idNameSpace

double DDEcalBarrelNewAlgo::ilyBndlOff ( ) const

inline

Definition at line 244 of file DDEcalBarrelNewAlgo.cc.

References m_IlyBndlOff.

Referenced by execute().

244 { return m_IlyBndlOff; }

DDEcalBarrelNewAlgo::m_IlyBndlOff

double m_IlyBndlOff

Definition: DDEcalBarrelNewAlgo.cc:620

◆ ilyDelPhi()

double DDEcalBarrelNewAlgo::ilyDelPhi ( ) const

inline

Definition at line 207 of file DDEcalBarrelNewAlgo.cc.

References m_IlyDelPhi.

Referenced by execute().

207 { return m_IlyDelPhi; }

DDEcalBarrelNewAlgo::m_IlyDelPhi

double DDEcalBarrelNewAlgo::ilyDiffOff ( ) const

inline

Definition at line 240 of file DDEcalBarrelNewAlgo.cc.

References m_IlyDiffOff.

Referenced by execute().

240 { return m_IlyDiffOff; }

DDEcalBarrelNewAlgo::m_IlyDiffOff

double m_IlyDiffOff

Definition: DDEcalBarrelNewAlgo.cc:616

◆ ilyFanOutHeight()

double DDEcalBarrelNewAlgo::ilyFanOutHeight ( ) const

inline

Definition at line 235 of file DDEcalBarrelNewAlgo.cc.

References m_IlyFanOutHeight.

Referenced by execute().

235 { return m_IlyFanOutHeight; }

DDEcalBarrelNewAlgo::m_IlyFanOutHeight

double m_IlyFanOutHeight

Definition: DDEcalBarrelNewAlgo.cc:611

◆ ilyFanOutHere()

double DDEcalBarrelNewAlgo::ilyFanOutHere ( ) const

inline

Definition at line 231 of file DDEcalBarrelNewAlgo.cc.

References m_IlyFanOutHere.

Referenced by execute().

231 { return m_IlyFanOutHere; }

DDEcalBarrelNewAlgo::m_IlyFanOutHere

double DDEcalBarrelNewAlgo::ilyFanOutWidth ( ) const

inline

Definition at line 233 of file DDEcalBarrelNewAlgo.cc.

References m_IlyFanOutWidth.

Referenced by execute().

233 { return m_IlyFanOutWidth; }

DDEcalBarrelNewAlgo::m_IlyFanOutWidth

double m_IlyFanOutWidth

Definition: DDEcalBarrelNewAlgo.cc:609

◆ ilyFEMHeight()

double DDEcalBarrelNewAlgo::ilyFEMHeight ( ) const

inline

Definition at line 250 of file DDEcalBarrelNewAlgo.cc.

References m_IlyFEMHeight.

Referenced by execute().

250 { return m_IlyFEMHeight; }

DDEcalBarrelNewAlgo::m_IlyFEMHeight

double DDEcalBarrelNewAlgo::ilyFEMWidth ( ) const

inline

Definition at line 248 of file DDEcalBarrelNewAlgo.cc.

References m_IlyFEMWidth.

Referenced by execute().

248 { return m_IlyFEMWidth; }

DDEcalBarrelNewAlgo::m_IlyFEMWidth

double m_IlyFEMWidth

Definition: DDEcalBarrelNewAlgo.cc:624

◆ ilyHere()

double DDEcalBarrelNewAlgo::ilyHere ( ) const

inline

Definition at line 204 of file DDEcalBarrelNewAlgo.cc.

References m_IlyHere.

Referenced by execute().

204 { return m_IlyHere; }

DDEcalBarrelNewAlgo::m_IlyHere

double m_IlyHere

Definition: DDEcalBarrelNewAlgo.cc:580

◆ ilyName()

const std::string& DDEcalBarrelNewAlgo::ilyName ( ) const

inline

Definition at line 205 of file DDEcalBarrelNewAlgo.cc.

References m_IlyName.

Referenced by execute().

205 { return m_IlyName; }

DDEcalBarrelNewAlgo::m_IlyName

std::string m_IlyName

Definition: DDEcalBarrelNewAlgo.cc:581

◆ ilyPhiLow()

double DDEcalBarrelNewAlgo::ilyPhiLow ( ) const

inline

Definition at line 206 of file DDEcalBarrelNewAlgo.cc.

References m_IlyPhiLow.

Referenced by execute().

206 { return m_IlyPhiLow; }

DDEcalBarrelNewAlgo::m_IlyPhiLow

double m_IlyPhiLow

Definition: DDEcalBarrelNewAlgo.cc:582

◆ ilyPipeHere()

double DDEcalBarrelNewAlgo::ilyPipeHere ( ) const

inline

Definition at line 212 of file DDEcalBarrelNewAlgo.cc.

References m_IlyPipeHere.

Referenced by execute().

212 { return m_IlyPipeHere; }

DDEcalBarrelNewAlgo::m_IlyPipeHere

double m_IlyPipeHere

Definition: DDEcalBarrelNewAlgo.cc:588

◆ ilyPipeID()

double DDEcalBarrelNewAlgo::ilyPipeID ( ) const

inline

Definition at line 215 of file DDEcalBarrelNewAlgo.cc.

References m_IlyPipeID.

Referenced by execute().

215 { return m_IlyPipeID; }

DDEcalBarrelNewAlgo::m_IlyPipeID

double m_IlyPipeID

Definition: DDEcalBarrelNewAlgo.cc:591

◆ ilyPipeMat()

DDMaterial DDEcalBarrelNewAlgo::ilyPipeMat ( ) const

inline

Definition at line 213 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_IlyPipeMat.

Referenced by execute().

213 { return ddmat(m_IlyPipeMat); }

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

DDEcalBarrelNewAlgo::m_IlyPipeMat

std::string m_IlyPipeMat

Definition: DDEcalBarrelNewAlgo.cc:589

◆ ilyPipeName()

const std::string& DDEcalBarrelNewAlgo::ilyPipeName ( ) const

inline

Definition at line 211 of file DDEcalBarrelNewAlgo.cc.

References m_IlyPipeName.

Referenced by execute().

211 { return m_IlyPipeName; }

DDEcalBarrelNewAlgo::m_IlyPipeName

std::string m_IlyPipeName

Definition: DDEcalBarrelNewAlgo.cc:587

◆ ilyPipeOD()

double DDEcalBarrelNewAlgo::ilyPipeOD ( ) const

inline

Definition at line 214 of file DDEcalBarrelNewAlgo.cc.

References m_IlyPipeOD.

Referenced by execute().

214 { return m_IlyPipeOD; }

DDEcalBarrelNewAlgo::m_IlyPipeOD

double m_IlyPipeOD

Definition: DDEcalBarrelNewAlgo.cc:590

◆ ilyPTMHeight()

double DDEcalBarrelNewAlgo::ilyPTMHeight ( ) const

inline

Definition at line 226 of file DDEcalBarrelNewAlgo.cc.

References m_IlyPTMHeight.

Referenced by execute().

226 { return m_IlyPTMHeight; }

DDEcalBarrelNewAlgo::m_IlyPTMHeight

double m_IlyPTMHeight

Definition: DDEcalBarrelNewAlgo.cc:602

◆ ilyPTMHere()

double DDEcalBarrelNewAlgo::ilyPTMHere ( ) const

inline

Definition at line 222 of file DDEcalBarrelNewAlgo.cc.

References m_IlyPTMHere.

Referenced by execute().

222 { return m_IlyPTMHere; }

DDEcalBarrelNewAlgo::m_IlyPTMHere

double DDEcalBarrelNewAlgo::ilyPTMWidth ( ) const

inline

Definition at line 224 of file DDEcalBarrelNewAlgo.cc.

References m_IlyPTMWidth.

Referenced by execute().

224 { return m_IlyPTMWidth; }

DDEcalBarrelNewAlgo::m_IlyPTMWidth

double m_IlyPTMWidth

Definition: DDEcalBarrelNewAlgo.cc:600

◆ initialize()

void DDEcalBarrelNewAlgo::initialize	(	const DDNumericArguments &	nArgs,
		const DDVectorArguments &	vArgs,
		const DDMapArguments &	mArgs,
		const DDStringArguments &	sArgs,
		const DDStringVectorArguments &	vsArgs
	)

override

Definition at line 1149 of file DDEcalBarrelNewAlgo.cc.

References createfilelist::int, m_AGLMat, m_AGLName, m_AGLThick, m_ANDMat, m_ANDName, m_ANDThick, m_APDMat, m_APDName, m_APDSide, m_APDThick, m_APDX1, m_APDX2, m_APDZ, m_ATJMat, m_ATJName, m_ATJThick, m_BackBracketHeight, m_BackBracketMat, m_BackBracketName, m_BackCBStdSep, m_BackCoolBarHeight, m_BackCoolBarHere, m_BackCoolBarMat, m_BackCoolBarName, m_BackCoolBarSSMat, m_BackCoolBarSSName, m_BackCoolBarSSThick, m_BackCoolBarThick, m_BackCoolBarWaMat, m_BackCoolBarWaName, m_BackCoolBarWaThick, m_BackCoolBarWidth, m_BackCoolHere, m_BackCoolMat, m_BackCoolTankHere, m_BackCoolTankMat, m_BackCoolTankName, m_BackCoolTankThick, m_BackCoolTankWaMat, m_BackCoolTankWaName, m_BackCoolTankWaWidth, m_BackCoolTankWidth, m_BackCoolVFEHere, m_BackCoolVFEMat, m_BackCoolVFEName, m_BackHere, m_BackMiscHere, m_BackPipeHere, m_BackPipeMat, m_BackPipeName, m_BackPipeWaterMat, m_BackPlate2Mat, m_BackPlate2Name, m_BackPlate2Thick, m_BackPlateHere, m_BackPlateLength, m_BackPlateMat, m_BackPlateName, m_BackPlateThick, m_BackPlateWidth, m_BackSideAngle, m_BackSideHeight, m_BackSideHere, m_BackSideLength, m_BackSideMat, m_BackSideName, m_BackSideWidth, m_BackSideYOff1, m_BackSideYOff2, m_BackVFEMat, m_BackVFEName, m_BackXOff, m_BackYOff, m_BarHere, m_BarMat, m_BarName, m_BarPhiHi, m_BarPhiLo, m_BSiMat, m_BSiName, m_BSiThick, m_BSiXSize, m_BSiYSize, m_capHere, m_capMat, m_capName, m_capThick, m_capXSize, m_capYSize, m_CERMat, m_CERName, m_CERThick, m_CERXSize, m_CERYSize, m_ClrFrAlv, m_ClrMat, m_ClrName, m_ClrReAlv, m_ClrThAlv, m_CryMat, m_CryName, m_DryAirTubeHere, m_DryAirTubeInnDiam, m_DryAirTubeMat, m_DryAirTubeName, m_DryAirTubeOutDiam, m_FawDelPhi, m_FawHere, m_FawName, m_FawPhiOff, m_FawPhiRot, m_FawRadOff, m_GrEdgeSlotHeight, m_GrEdgeSlotHere, m_GrEdgeSlotMat, m_GrEdgeSlotName, m_GrEdgeSlotWidth, m_GridHere, m_GridMat, m_GridName, m_GridThick, m_GrilleHere, m_GrilleMat, m_GrilleName, m_GrilleThick, m_GrilleWidth, m_GrilleZSpace, m_GrMidSlotHere, m_GrMidSlotMat, m_GrMidSlotName, m_GrMidSlotWidth, m_GrMidSlotXOff, m_HawRCutDelY, m_HawRCutY, m_HawRCutZ, m_HawRHBIG, m_HawRhsml, m_HawRName, m_HawYOffCry, m_idNameSpace, m_IlyBndlLength, m_IlyBndlMat, m_IlyBndlName, m_IlyBndlOff, m_IlyDelPhi, m_IlyDiffLength, m_IlyDiffMat, m_IlyDiffName, m_IlyDiffOff, m_IlyFanOutHeight, m_IlyFanOutHere, m_IlyFanOutLength, m_IlyFanOutMat, m_IlyFanOutName, m_IlyFanOutWidth, m_IlyFEMHeight, m_IlyFEMLength, m_IlyFEMMat, m_IlyFEMName, m_IlyFEMWidth, m_IlyHere, m_IlyName, m_IlyPhiLow, m_IlyPipeHere, m_IlyPipeID, m_IlyPipeMat, m_IlyPipeName, m_IlyPipeOD, m_IlyPTMHeight, m_IlyPTMHere, m_IlyPTMLength, m_IlyPTMMat, m_IlyPTMName, m_IlyPTMWidth, m_MBCoolTubeHere, m_MBCoolTubeInnDiam, m_MBCoolTubeMat, m_MBCoolTubeName, m_MBCoolTubeNum, m_MBCoolTubeOutDiam, m_MBLyrHere, m_MBManifHere, m_MBManifInnDiam, m_MBManifMat, m_MBManifName, m_MBManifOutDiam, m_NCryPerAlvEta, m_NCryTypes, m_NFawPerSupm, m_NomCryDimAF, m_NomCryDimLZ, m_PatchPanelHere, m_PatchPanelName, m_PincerBlkLength, m_PincerBlkMat, m_PincerBlkName, m_PincerCutHeight, m_PincerCutMat, m_PincerCutName, m_PincerCutWidth, m_PincerEnvHeight, m_PincerEnvLength, m_PincerEnvMat, m_PincerEnvName, m_PincerEnvWidth, m_PincerRodHere, m_PincerRodMat, m_PincerRodName, m_PincerShim1Name, m_PincerShim1Width, m_PincerShim2Name, m_PincerShim2Width, m_PincerShimHeight, m_PincerShimMat, m_SGLMat, m_SGLName, m_SGLThick, m_SpmCutName, m_SpmCutRM, m_SpmCutRP, m_SpmCutShow, m_SpmCutThick, m_SpmDelPhi, m_SpmExpThick, m_SpmExpWide, m_SpmExpYOff, m_SpmLowPhi, m_SpmMat, m_SpmName, m_SpmNPerHalf, m_SpmPhiOff, m_SpmSideHigh, m_SpmSideMat, m_SpmSideName, m_SpmSideThick, m_SpmSideYOffM, m_SpmSideYOffP, m_UnderAF, m_UnderAR, m_UnderBF, m_UnderBR, m_UnderCF, m_UnderCR, m_UnderLZ, m_vecBackCoolName, m_vecBackCoolNPerSec, m_vecBackCoolNSec, m_vecBackCoolSecSep, m_vecBackMiscMat, m_vecBackMiscName, m_vecBackMiscThick, m_vecBackPipeDiam, m_vecBackPipeThick, m_vecBackVFELyrMat, m_vecBackVFELyrName, m_vecBackVFELyrThick, m_vecBarRMax, m_vecBarRMin, m_vecBarRota, m_vecBarRota2, m_vecBarRota3, m_vecBarTran, m_vecBarZPts, m_vecGapAlvEta, m_vecGrilleHeight, m_vecGrilleZOff, m_vecGrMidSlotHeight, m_vecIlyFanOutPhi, m_vecIlyFanOutZ, m_vecIlyFEMPhi, m_vecIlyFEMZ, m_vecIlyMat, m_vecIlyPipeLength, m_vecIlyPipePhi, m_vecIlyPipeType, m_vecIlyPipeZ, m_vecIlyPTMPhi, m_vecIlyPTMZ, m_vecIlyThick, m_vecMBLyrMat, m_vecMBLyrName, m_vecMBLyrThick, m_vecNomCryDimAR, m_vecNomCryDimBF, m_vecNomCryDimBR, m_vecNomCryDimCF, m_vecNomCryDimCR, m_vecPatchPanelMat, m_vecPatchPanelNames, m_vecPatchPanelThick, m_vecPincerEnvZOff, m_vecPincerRodAzimuth, m_vecSpmBRota, m_vecSpmBTran, m_vecSpmCutTM, m_vecSpmCutTP, m_vecSpmHere, m_vecSpmRMax, m_vecSpmRMin, m_vecSpmRota, m_vecSpmTran, m_vecSpmZPts, m_vecWebClrTh, m_vecWebLength, m_vecWebPlTh, m_WallFrAlv, m_WallMat, m_WallName, m_WallReAlv, m_WallThAlv, m_WebClrMat, m_WebClrName, m_WebHere, m_WebPlMat, m_WebPlName, m_WrapFrAlv, m_WrapMat, m_WrapName, m_WrapReAlv, m_WrapThAlv, DDCurrentNamespace::ns(), and class-composition::parent.

                                                                             {
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("EcalGeom") << "DDEcalBarrelAlgo info: Initialize";
 #endif
   m_idNameSpace = DDCurrentNamespace::ns();
   // TRICK!
   m_idNameSpace = parent().name().ns();
   // barrel parent volume
   m_BarName = sArgs["BarName"];
   m_BarMat = sArgs["BarMat"];
   m_vecBarZPts = vArgs["BarZPts"];
   m_vecBarRMin = vArgs["BarRMin"];
   m_vecBarRMax = vArgs["BarRMax"];
   m_vecBarTran = vArgs["BarTran"];
   m_vecBarRota = vArgs["BarRota"];
   m_vecBarRota2 = vArgs["BarRota2"];
   m_vecBarRota3 = vArgs["BarRota3"];
   m_BarPhiLo = nArgs["BarPhiLo"];
   m_BarPhiHi = nArgs["BarPhiHi"];
   m_BarHere = nArgs["BarHere"];
 
   m_SpmName = sArgs["SpmName"];
   m_SpmMat = sArgs["SpmMat"];
   m_vecSpmZPts = vArgs["SpmZPts"];
   m_vecSpmRMin = vArgs["SpmRMin"];
   m_vecSpmRMax = vArgs["SpmRMax"];
   m_vecSpmTran = vArgs["SpmTran"];
   m_vecSpmRota = vArgs["SpmRota"];
   m_vecSpmBTran = vArgs["SpmBTran"];
   m_vecSpmBRota = vArgs["SpmBRota"];
   m_SpmNPerHalf = static_cast<unsigned int>(nArgs["SpmNPerHalf"]);
   m_SpmLowPhi = nArgs["SpmLowPhi"];
   m_SpmDelPhi = nArgs["SpmDelPhi"];
   m_SpmPhiOff = nArgs["SpmPhiOff"];
   m_vecSpmHere = vArgs["SpmHere"];
   m_SpmCutName = sArgs["SpmCutName"];
   m_SpmCutThick = nArgs["SpmCutThick"];
   m_SpmCutShow = int(nArgs["SpmCutShow"]);
   m_vecSpmCutTM = vArgs["SpmCutTM"];
   m_vecSpmCutTP = vArgs["SpmCutTP"];
   m_SpmCutRM = nArgs["SpmCutRM"];
   m_SpmCutRP = nArgs["SpmCutRP"];
   m_SpmExpThick = nArgs["SpmExpThick"];
   m_SpmExpWide = nArgs["SpmExpWide"];
   m_SpmExpYOff = nArgs["SpmExpYOff"];
   m_SpmSideName = sArgs["SpmSideName"];
   m_SpmSideMat = sArgs["SpmSideMat"];
   m_SpmSideHigh = nArgs["SpmSideHigh"];
   m_SpmSideThick = nArgs["SpmSideThick"];
   m_SpmSideYOffM = nArgs["SpmSideYOffM"];
   m_SpmSideYOffP = nArgs["SpmSideYOffP"];
 
   m_NomCryDimAF = nArgs["NomCryDimAF"];
   m_NomCryDimLZ = nArgs["NomCryDimLZ"];
   m_vecNomCryDimBF = vArgs["NomCryDimBF"];
   m_vecNomCryDimCF = vArgs["NomCryDimCF"];
   m_vecNomCryDimAR = vArgs["NomCryDimAR"];
   m_vecNomCryDimBR = vArgs["NomCryDimBR"];
   m_vecNomCryDimCR = vArgs["NomCryDimCR"];
 
   m_UnderAF = nArgs["UnderAF"];
   m_UnderLZ = nArgs["UnderLZ"];
   m_UnderBF = nArgs["UnderBF"];
   m_UnderCF = nArgs["UnderCF"];
   m_UnderAR = nArgs["UnderAR"];
   m_UnderBR = nArgs["UnderBR"];
   m_UnderCR = nArgs["UnderCR"];
 
   m_WallThAlv = nArgs["WallThAlv"];
   m_WrapThAlv = nArgs["WrapThAlv"];
   m_ClrThAlv = nArgs["ClrThAlv"];
   m_vecGapAlvEta = vArgs["GapAlvEta"];
 
   m_WallFrAlv = nArgs["WallFrAlv"];
   m_WrapFrAlv = nArgs["WrapFrAlv"];
   m_ClrFrAlv = nArgs["ClrFrAlv"];
 
   m_WallReAlv = nArgs["WallReAlv"];
   m_WrapReAlv = nArgs["WrapReAlv"];
   m_ClrReAlv = nArgs["ClrReAlv"];
 
   m_NCryTypes = static_cast<unsigned int>(nArgs["NCryTypes"]);
   m_NCryPerAlvEta = static_cast<unsigned int>(nArgs["NCryPerAlvEta"]);
 
   m_CryName = sArgs["CryName"];
   m_ClrName = sArgs["ClrName"];
   m_WrapName = sArgs["WrapName"];
   m_WallName = sArgs["WallName"];
 
   m_CryMat = sArgs["CryMat"];
   m_ClrMat = sArgs["ClrMat"];
   m_WrapMat = sArgs["WrapMat"];
   m_WallMat = sArgs["WallMat"];
 
   m_capName = sArgs["CapName"];
   m_capHere = nArgs["CapHere"];
   m_capMat = sArgs["CapMat"];
   m_capXSize = nArgs["CapXSize"];
   m_capYSize = nArgs["CapYSize"];
   m_capThick = nArgs["CapThick"];
 
   m_CERName = sArgs["CerName"];
   m_CERMat = sArgs["CerMat"];
   m_CERXSize = nArgs["CerXSize"];
   m_CERYSize = nArgs["CerYSize"];
   m_CERThick = nArgs["CerThick"];
 
   m_BSiName = sArgs["BSiName"];
   m_BSiMat = sArgs["BSiMat"];
   m_BSiXSize = nArgs["BSiXSize"];
   m_BSiYSize = nArgs["BSiYSize"];
   m_BSiThick = nArgs["BSiThick"];
 
   m_APDName = sArgs["APDName"];
   m_APDMat = sArgs["APDMat"];
   m_APDSide = nArgs["APDSide"];
   m_APDThick = nArgs["APDThick"];
   m_APDZ = nArgs["APDZ"];
   m_APDX1 = nArgs["APDX1"];
   m_APDX2 = nArgs["APDX2"];
 
   m_ATJName = sArgs["ATJName"];
   m_ATJMat = sArgs["ATJMat"];
   m_ATJThick = nArgs["ATJThick"];
 
   m_SGLName = sArgs["SGLName"];
   m_SGLMat = sArgs["SGLMat"];
   m_SGLThick = nArgs["SGLThick"];
 
   m_AGLName = sArgs["AGLName"];
   m_AGLMat = sArgs["AGLMat"];
   m_AGLThick = nArgs["AGLThick"];
 
   m_ANDName = sArgs["ANDName"];
   m_ANDMat = sArgs["ANDMat"];
   m_ANDThick = nArgs["ANDThick"];
 
   m_WebHere = nArgs["WebHere"];
   m_WebPlName = sArgs["WebPlName"];
   m_WebClrName = sArgs["WebClrName"];
   m_WebPlMat = sArgs["WebPlMat"];
   m_WebClrMat = sArgs["WebClrMat"];
   m_vecWebPlTh = vArgs["WebPlTh"];
   m_vecWebClrTh = vArgs["WebClrTh"];
   m_vecWebLength = vArgs["WebLength"];
 
   m_IlyHere = nArgs["IlyHere"];
   m_IlyName = sArgs["IlyName"];
   m_IlyPhiLow = nArgs["IlyPhiLow"];
   m_IlyDelPhi = nArgs["IlyDelPhi"];
   m_vecIlyMat = vsArgs["IlyMat"];
   m_vecIlyThick = vArgs["IlyThick"];
 
   m_IlyPipeName = sArgs["IlyPipeName"];
   m_IlyPipeHere = nArgs["IlyPipeHere"];
   m_IlyPipeMat = sArgs["IlyPipeMat"];
   m_IlyPipeOD = nArgs["IlyPipeOD"];
   m_IlyPipeID = nArgs["IlyPipeID"];
   m_vecIlyPipeLength = vArgs["IlyPipeLength"];
   m_vecIlyPipeType = vArgs["IlyPipeType"];
   m_vecIlyPipePhi = vArgs["IlyPipePhi"];
   m_vecIlyPipeZ = vArgs["IlyPipeZ"];
 
   m_IlyPTMName = sArgs["IlyPTMName"];
   m_IlyPTMHere = nArgs["IlyPTMHere"];
   m_IlyPTMMat = sArgs["IlyPTMMat"];
   m_IlyPTMWidth = nArgs["IlyPTMWidth"];
   m_IlyPTMLength = nArgs["IlyPTMLength"];
   m_IlyPTMHeight = nArgs["IlyPTMHeight"];
   m_vecIlyPTMZ = vArgs["IlyPTMZ"];
   m_vecIlyPTMPhi = vArgs["IlyPTMPhi"];
 
   m_IlyFanOutName = sArgs["IlyFanOutName"];
   m_IlyFanOutHere = nArgs["IlyFanOutHere"];
   m_IlyFanOutMat = sArgs["IlyFanOutMat"];
   m_IlyFanOutWidth = nArgs["IlyFanOutWidth"];
   m_IlyFanOutLength = nArgs["IlyFanOutLength"];
   m_IlyFanOutHeight = nArgs["IlyFanOutHeight"];
   m_vecIlyFanOutZ = vArgs["IlyFanOutZ"];
   m_vecIlyFanOutPhi = vArgs["IlyFanOutPhi"];
   m_IlyDiffName = sArgs["IlyDiffName"];
   m_IlyDiffMat = sArgs["IlyDiffMat"];
   m_IlyDiffOff = nArgs["IlyDiffOff"];
   m_IlyDiffLength = nArgs["IlyDiffLength"];
   m_IlyBndlName = sArgs["IlyBndlName"];
   m_IlyBndlMat = sArgs["IlyBndlMat"];
   m_IlyBndlOff = nArgs["IlyBndlOff"];
   m_IlyBndlLength = nArgs["IlyBndlLength"];
   m_IlyFEMName = sArgs["IlyFEMName"];
   m_IlyFEMMat = sArgs["IlyFEMMat"];
   m_IlyFEMWidth = nArgs["IlyFEMWidth"];
   m_IlyFEMLength = nArgs["IlyFEMLength"];
   m_IlyFEMHeight = nArgs["IlyFEMHeight"];
   m_vecIlyFEMZ = vArgs["IlyFEMZ"];
   m_vecIlyFEMPhi = vArgs["IlyFEMPhi"];
 
   m_HawRName = sArgs["HawRName"];
   m_FawName = sArgs["FawName"];
   m_FawHere = nArgs["FawHere"];
   m_HawRHBIG = nArgs["HawRHBIG"];
   m_HawRhsml = nArgs["HawRhsml"];
   m_HawRCutY = nArgs["HawRCutY"];
   m_HawRCutZ = nArgs["HawRCutZ"];
   m_HawRCutDelY = nArgs["HawRCutDelY"];
   m_HawYOffCry = nArgs["HawYOffCry"];
 
   m_NFawPerSupm = static_cast<unsigned int>(nArgs["NFawPerSupm"]);
   m_FawPhiOff = nArgs["FawPhiOff"];
   m_FawDelPhi = nArgs["FawDelPhi"];
   m_FawPhiRot = nArgs["FawPhiRot"];
   m_FawRadOff = nArgs["FawRadOff"];
 
   m_GridHere = nArgs["GridHere"];
   m_GridName = sArgs["GridName"];
   m_GridMat = sArgs["GridMat"];
   m_GridThick = nArgs["GridThick"];
 
   m_BackHere = nArgs["BackHere"];
   m_BackXOff = nArgs["BackXOff"];
   m_BackYOff = nArgs["BackYOff"];
   m_BackSideName = sArgs["BackSideName"];
   m_BackSideHere = nArgs["BackSideHere"];
   m_BackSideLength = nArgs["BackSideLength"];
   m_BackSideHeight = nArgs["BackSideHeight"];
   m_BackSideWidth = nArgs["BackSideWidth"];
   m_BackSideYOff1 = nArgs["BackSideYOff1"];
   m_BackSideYOff2 = nArgs["BackSideYOff2"];
   m_BackSideAngle = nArgs["BackSideAngle"];
   m_BackSideMat = sArgs["BackSideMat"];
   m_BackPlateName = sArgs["BackPlateName"];
   m_BackPlateHere = nArgs["BackPlateHere"];
   m_BackPlateLength = nArgs["BackPlateLength"];
   m_BackPlateThick = nArgs["BackPlateThick"];
   m_BackPlateWidth = nArgs["BackPlateWidth"];
   m_BackPlateMat = sArgs["BackPlateMat"];
   m_BackPlate2Name = sArgs["BackPlate2Name"];
   m_BackPlate2Thick = nArgs["BackPlate2Thick"];
   m_BackPlate2Mat = sArgs["BackPlate2Mat"];
   m_GrilleName = sArgs["GrilleName"];
   m_GrilleHere = nArgs["GrilleHere"];
   m_GrilleThick = nArgs["GrilleThick"];
   m_GrilleWidth = nArgs["GrilleWidth"];
   m_GrilleZSpace = nArgs["GrilleZSpace"];
   m_GrilleMat = sArgs["GrilleMat"];
   m_vecGrilleHeight = vArgs["GrilleHeight"];
   m_vecGrilleZOff = vArgs["GrilleZOff"];
 
   m_GrEdgeSlotName = sArgs["GrEdgeSlotName"];
   m_GrEdgeSlotMat = sArgs["GrEdgeSlotMat"];
   m_GrEdgeSlotHere = nArgs["GrEdgeSlotHere"];
   m_GrEdgeSlotHeight = nArgs["GrEdgeSlotHeight"];
   m_GrEdgeSlotWidth = nArgs["GrEdgeSlotWidth"];
   m_GrMidSlotName = sArgs["GrMidSlotName"];
   m_GrMidSlotMat = sArgs["GrMidSlotMat"];
   m_GrMidSlotHere = nArgs["GrMidSlotHere"];
   m_GrMidSlotWidth = nArgs["GrMidSlotWidth"];
   m_GrMidSlotXOff = nArgs["GrMidSlotXOff"];
   m_vecGrMidSlotHeight = vArgs["GrMidSlotHeight"];
 
   m_BackPipeHere = nArgs["BackPipeHere"];
   m_BackPipeName = sArgs["BackPipeName"];
   m_vecBackPipeDiam = vArgs["BackPipeDiam"];
   m_vecBackPipeThick = vArgs["BackPipeThick"];
   m_BackPipeMat = sArgs["BackPipeMat"];
   m_BackPipeWaterMat = sArgs["BackPipeWaterMat"];
 
   m_BackCoolHere = nArgs["BackCoolHere"];
   m_vecBackCoolName = vsArgs["BackCoolName"];
   m_BackCoolBarHere = nArgs["BackCoolBarHere"];
   m_BackCoolBarWidth = nArgs["BackCoolBarWidth"];
   m_BackCoolBarHeight = nArgs["BackCoolBarHeight"];
   m_BackCoolMat = sArgs["BackCoolMat"];
   m_BackCoolBarName = sArgs["BackCoolBarName"];
   m_BackCoolBarThick = nArgs["BackCoolBarThick"];
   m_BackCoolBarMat = sArgs["BackCoolBarMat"];
   m_BackCoolBarSSName = sArgs["BackCoolBarSSName"];
   m_BackCoolBarSSThick = nArgs["BackCoolBarSSThick"];
   m_BackCoolBarSSMat = sArgs["BackCoolBarSSMat"];
   m_BackCoolBarWaName = sArgs["BackCoolBarWaName"];
   m_BackCoolBarWaThick = nArgs["BackCoolBarWaThick"];
   m_BackCoolBarWaMat = sArgs["BackCoolBarWaMat"];
   m_BackCoolVFEHere = nArgs["BackCoolVFEHere"];
   m_BackCoolVFEName = sArgs["BackCoolVFEName"];
   m_BackCoolVFEMat = sArgs["BackCoolVFEMat"];
   m_BackVFEName = sArgs["BackVFEName"];
   m_BackVFEMat = sArgs["BackVFEMat"];
   m_vecBackVFELyrThick = vArgs["BackVFELyrThick"];
   m_vecBackVFELyrName = vsArgs["BackVFELyrName"];
   m_vecBackVFELyrMat = vsArgs["BackVFELyrMat"];
   m_vecBackCoolNSec = vArgs["BackCoolNSec"];
   m_vecBackCoolSecSep = vArgs["BackCoolSecSep"];
   m_vecBackCoolNPerSec = vArgs["BackCoolNPerSec"];
   m_BackCBStdSep = nArgs["BackCBStdSep"];
 
   m_BackMiscHere = nArgs["BackMiscHere"];
   m_vecBackMiscThick = vArgs["BackMiscThick"];
   m_vecBackMiscName = vsArgs["BackMiscName"];
   m_vecBackMiscMat = vsArgs["BackMiscMat"];
   m_PatchPanelHere = nArgs["PatchPanelHere"];
   m_vecPatchPanelThick = vArgs["PatchPanelThick"];
   m_vecPatchPanelNames = vsArgs["PatchPanelNames"];
   m_vecPatchPanelMat = vsArgs["PatchPanelMat"];
   m_PatchPanelName = sArgs["PatchPanelName"];
 
   m_BackCoolTankHere = nArgs["BackCoolTankHere"];
   m_BackCoolTankName = sArgs["BackCoolTankName"];
   m_BackCoolTankWidth = nArgs["BackCoolTankWidth"];
   m_BackCoolTankThick = nArgs["BackCoolTankThick"];
   m_BackCoolTankMat = sArgs["BackCoolTankMat"];
   m_BackCoolTankWaName = sArgs["BackCoolTankWaName"];
   m_BackCoolTankWaWidth = nArgs["BackCoolTankWaWidth"];
   m_BackCoolTankWaMat = sArgs["BackCoolTankWaMat"];
   m_BackBracketName = sArgs["BackBracketName"];
   m_BackBracketHeight = nArgs["BackBracketHeight"];
   m_BackBracketMat = sArgs["BackBracketMat"];
 
   m_DryAirTubeHere = nArgs["DryAirTubeHere"];
   m_DryAirTubeName = sArgs["DryAirTubeName"];
   m_MBCoolTubeNum = static_cast<unsigned int>(nArgs["MBCoolTubeNum"]);
   m_DryAirTubeInnDiam = nArgs["DryAirTubeInnDiam"];
   m_DryAirTubeOutDiam = nArgs["DryAirTubeOutDiam"];
   m_DryAirTubeMat = sArgs["DryAirTubeMat"];
   m_MBCoolTubeHere = nArgs["MBCoolTubeHere"];
   m_MBCoolTubeName = sArgs["MBCoolTubeName"];
   m_MBCoolTubeInnDiam = nArgs["MBCoolTubeInnDiam"];
   m_MBCoolTubeOutDiam = nArgs["MBCoolTubeOutDiam"];
   m_MBCoolTubeMat = sArgs["MBCoolTubeMat"];
   m_MBManifHere = nArgs["MBManifHere"];
   m_MBManifName = sArgs["MBManifName"];
   m_MBManifInnDiam = nArgs["MBManifInnDiam"];
   m_MBManifOutDiam = nArgs["MBManifOutDiam"];
   m_MBManifMat = sArgs["MBManifMat"];
   m_MBLyrHere = nArgs["MBLyrHere"];
   m_vecMBLyrThick = vArgs["MBLyrThick"];
   m_vecMBLyrName = vsArgs["MBLyrName"];
   m_vecMBLyrMat = vsArgs["MBLyrMat"];
 
   m_PincerRodHere = nArgs["PincerRodHere"];
   m_PincerRodName = sArgs["PincerRodName"];
   m_PincerRodMat = sArgs["PincerRodMat"];
   m_vecPincerRodAzimuth = vArgs["PincerRodAzimuth"];
   m_PincerEnvName = sArgs["PincerEnvName"];
   m_PincerEnvMat = sArgs["PincerEnvMat"];
   m_PincerEnvWidth = nArgs["PincerEnvWidth"];
   m_PincerEnvHeight = nArgs["PincerEnvHeight"];
   m_PincerEnvLength = nArgs["PincerEnvLength"];
   m_vecPincerEnvZOff = vArgs["PincerEnvZOff"];
   m_PincerBlkName = sArgs["PincerBlkName"];
   m_PincerBlkMat = sArgs["PincerBlkMat"];
   m_PincerBlkLength = nArgs["PincerBlkLength"];
   m_PincerShim1Name = sArgs["PincerShim1Name"];
   m_PincerShimHeight = nArgs["PincerShimHeight"];
   m_PincerShim2Name = sArgs["PincerShim2Name"];
   m_PincerShimMat = sArgs["PincerShimMat"];
   m_PincerShim1Width = nArgs["PincerShim1Width"];
   m_PincerShim2Width = nArgs["PincerShim2Width"];
   m_PincerCutName = sArgs["PincerCutName"];
   m_PincerCutMat = sArgs["PincerCutMat"];
   m_PincerCutWidth = nArgs["PincerCutWidth"];
   m_PincerCutHeight = nArgs["PincerCutHeight"];
 
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("EcalGeom") << "DDEcalBarrelAlgo info: end initialize";
 #endif
 }

◆ mBCoolTubeHere()

double DDEcalBarrelNewAlgo::mBCoolTubeHere ( ) const

inline

Definition at line 379 of file DDEcalBarrelNewAlgo.cc.

References m_MBCoolTubeHere.

Referenced by execute().

379 { return m_MBCoolTubeHere; }

DDEcalBarrelNewAlgo::m_MBCoolTubeHere

double m_MBCoolTubeHere

Definition: DDEcalBarrelNewAlgo.cc:757

◆ mBCoolTubeInnDiam()

double DDEcalBarrelNewAlgo::mBCoolTubeInnDiam ( ) const

inline

Definition at line 381 of file DDEcalBarrelNewAlgo.cc.

References m_MBCoolTubeInnDiam.

Referenced by execute().

381 { return m_MBCoolTubeInnDiam; }

DDEcalBarrelNewAlgo::m_MBCoolTubeInnDiam

double m_MBCoolTubeInnDiam

Definition: DDEcalBarrelNewAlgo.cc:759

◆ mBCoolTubeMat()

DDMaterial DDEcalBarrelNewAlgo::mBCoolTubeMat ( ) const

inline

Definition at line 383 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_MBCoolTubeMat.

Referenced by execute().

383 { return ddmat(m_MBCoolTubeMat); }

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

DDEcalBarrelNewAlgo::m_MBCoolTubeMat

std::string m_MBCoolTubeMat

Definition: DDEcalBarrelNewAlgo.cc:761

◆ mBCoolTubeName()

const std::string& DDEcalBarrelNewAlgo::mBCoolTubeName ( ) const

inline

Definition at line 380 of file DDEcalBarrelNewAlgo.cc.

References m_MBCoolTubeName.

Referenced by execute().

380 { return m_MBCoolTubeName; }

DDEcalBarrelNewAlgo::m_MBCoolTubeName

std::string m_MBCoolTubeName

Definition: DDEcalBarrelNewAlgo.cc:758

◆ mBCoolTubeNum()

double DDEcalBarrelNewAlgo::mBCoolTubeNum ( ) const

inline

Definition at line 375 of file DDEcalBarrelNewAlgo.cc.

References m_MBCoolTubeNum.

Referenced by execute().

375 { return m_MBCoolTubeNum; }

DDEcalBarrelNewAlgo::m_MBCoolTubeNum

unsigned int m_MBCoolTubeNum

Definition: DDEcalBarrelNewAlgo.cc:753

◆ mBCoolTubeOutDiam()

double DDEcalBarrelNewAlgo::mBCoolTubeOutDiam ( ) const

inline

Definition at line 382 of file DDEcalBarrelNewAlgo.cc.

References m_MBCoolTubeOutDiam.

Referenced by execute().

382 { return m_MBCoolTubeOutDiam; }

DDEcalBarrelNewAlgo::m_MBCoolTubeOutDiam

double m_MBCoolTubeOutDiam

Definition: DDEcalBarrelNewAlgo.cc:760

◆ mBLyrHere()

double DDEcalBarrelNewAlgo::mBLyrHere ( ) const

inline

Definition at line 389 of file DDEcalBarrelNewAlgo.cc.

References m_MBLyrHere.

Referenced by execute().

389 { return m_MBLyrHere; }

DDEcalBarrelNewAlgo::m_MBLyrHere

double m_MBLyrHere

Definition: DDEcalBarrelNewAlgo.cc:767

◆ mBManifHere()

double DDEcalBarrelNewAlgo::mBManifHere ( ) const

inline

Definition at line 384 of file DDEcalBarrelNewAlgo.cc.

References m_MBManifHere.

Referenced by execute().

384 { return m_MBManifHere; }

DDEcalBarrelNewAlgo::m_MBManifHere

double DDEcalBarrelNewAlgo::mBManifOutDiam ( ) const

inline

Definition at line 387 of file DDEcalBarrelNewAlgo.cc.

References m_MBManifOutDiam.

Referenced by execute().

387 { return m_MBManifOutDiam; }

DDEcalBarrelNewAlgo::m_MBManifOutDiam

double m_MBManifOutDiam

Definition: DDEcalBarrelNewAlgo.cc:765

◆ myrot()

DDRotation DDEcalBarrelNewAlgo::myrot	(	const std::string &	s,
		const CLHEP::HepRotation &	r
	)		const

Create a DDRotation from a string converted to DDName and CLHEP::HepRotation converted to DDRotationMatrix. – Michael Case.

Definition at line 3730 of file DDEcalBarrelNewAlgo.cc.

References ddname(), DDrot(), m_idNameSpace, alignCSCRings::r, and alignCSCRings::s.

Referenced by execute(), and web().

                                                                                          {
   return DDrot(
       ddname(m_idNameSpace + ":" + s),
       std::make_unique<DDRotationMatrix>(r.xx(), r.xy(), r.xz(), r.yx(), r.yy(), r.yz(), r.zx(), r.zy(), r.zz()));
 }

◆ mytrap()

DDSolid DDEcalBarrelNewAlgo::mytrap	(	const std::string &	s,
		const Trap &	t
	)		const

Definition at line 3747 of file DDEcalBarrelNewAlgo.cc.

References ddname(), alignCSCRings::s, submitPVValidationJobs::t, and DDSolidFactory::trap().

Referenced by execute(), and web().

                                                                                               {
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("EBGeom") << DDName(s) << " Trap " << t.theta() / CLHEP::deg << ":" << t.phi() / CLHEP::deg << ":"
                              << t.h1() << ":" << t.bl1() << ":" << t.tl1() << ":" << t.alp1() / CLHEP::deg << ":"
                              << t.h2() << ":" << t.bl2() << ":" << t.tl2() << ":" << t.alp2() / CLHEP::deg;
 #endif
   return DDSolidFactory::trap(
       ddname(s), t.dz(), t.theta(), t.phi(), t.h1(), t.bl1(), t.tl1(), t.alp1(), t.h2(), t.bl2(), t.tl2(), t.alp2());
 }

◆ nCryPerAlvEta()

unsigned int DDEcalBarrelNewAlgo::nCryPerAlvEta ( ) const

inline

Definition at line 141 of file DDEcalBarrelNewAlgo.cc.

References m_NCryPerAlvEta.

Referenced by execute().

141 { return m_NCryPerAlvEta; }

DDEcalBarrelNewAlgo::m_NCryPerAlvEta

unsigned int m_NCryPerAlvEta

Definition: DDEcalBarrelNewAlgo.cc:516

◆ nCryTypes()

unsigned int DDEcalBarrelNewAlgo::nCryTypes ( ) const

inline

Definition at line 140 of file DDEcalBarrelNewAlgo.cc.

References m_NCryTypes.

Referenced by execute().

140 { return m_NCryTypes; }

DDEcalBarrelNewAlgo::m_NCryTypes

unsigned int m_NCryTypes

Definition: DDEcalBarrelNewAlgo.cc:515

◆ nFawPerSupm()

unsigned int DDEcalBarrelNewAlgo::nFawPerSupm ( ) const

inline

Definition at line 264 of file DDEcalBarrelNewAlgo.cc.

References m_NFawPerSupm.

Referenced by execute().

264 { return m_NFawPerSupm; }

DDEcalBarrelNewAlgo::m_NFawPerSupm

unsigned int m_NFawPerSupm

Definition: DDEcalBarrelNewAlgo.cc:639

◆ nomCryDimAF()

double DDEcalBarrelNewAlgo::nomCryDimAF ( ) const

inline

Definition at line 111 of file DDEcalBarrelNewAlgo.cc.

References m_NomCryDimAF.

Referenced by execute().

111 { return m_NomCryDimAF; }

DDEcalBarrelNewAlgo::m_NomCryDimAF

double m_NomCryDimAF

Definition: DDEcalBarrelNewAlgo.cc:486

◆ nomCryDimLZ()

double DDEcalBarrelNewAlgo::nomCryDimLZ ( ) const

inline

Definition at line 112 of file DDEcalBarrelNewAlgo.cc.

References m_NomCryDimLZ.

Referenced by execute().

112 { return m_NomCryDimLZ; }

DDEcalBarrelNewAlgo::m_NomCryDimLZ

double m_NomCryDimLZ

Definition: DDEcalBarrelNewAlgo.cc:487

◆ patchPanelHere()

double DDEcalBarrelNewAlgo::patchPanelHere ( ) const

inline

Definition at line 327 of file DDEcalBarrelNewAlgo.cc.

References m_PatchPanelHere.

Referenced by execute().

327 { return m_PatchPanelHere; }

DDEcalBarrelNewAlgo::m_PatchPanelHere

double m_PatchPanelHere

Definition: DDEcalBarrelNewAlgo.cc:733

◆ patchPanelName()

DDName DDEcalBarrelNewAlgo::patchPanelName ( ) const

inline

Definition at line 331 of file DDEcalBarrelNewAlgo.cc.

References ddname(), and m_PatchPanelName.

Referenced by execute().

331 { return ddname(m_PatchPanelName); }

DDEcalBarrelNewAlgo::ddname

DDName ddname(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3738

DDEcalBarrelNewAlgo::m_PatchPanelName

double DDEcalBarrelNewAlgo::pincerCutHeight ( ) const

inline

Definition at line 421 of file DDEcalBarrelNewAlgo.cc.

References m_PincerCutHeight.

Referenced by execute().

421 { return m_PincerCutHeight; }

DDEcalBarrelNewAlgo::m_PincerCutHeight

double m_PincerCutHeight

Definition: DDEcalBarrelNewAlgo.cc:800

◆ pincerCutMat()

DDMaterial DDEcalBarrelNewAlgo::pincerCutMat ( ) const

inline

Definition at line 419 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_PincerCutMat.

Referenced by execute().

419 { return ddmat(m_PincerCutMat); }

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

DDEcalBarrelNewAlgo::m_PincerCutMat

std::string m_PincerCutMat

Definition: DDEcalBarrelNewAlgo.cc:798

◆ pincerCutName()

DDName DDEcalBarrelNewAlgo::pincerCutName ( ) const

inline

Definition at line 418 of file DDEcalBarrelNewAlgo.cc.

References ddname(), and m_PincerCutName.

Referenced by execute().

418 { return ddname(m_PincerCutName); }

DDEcalBarrelNewAlgo::m_PincerCutName

std::string m_PincerCutName

Definition: DDEcalBarrelNewAlgo.cc:797

DDEcalBarrelNewAlgo::ddname

DDName ddname(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3738

◆ pincerCutWidth()

double DDEcalBarrelNewAlgo::pincerCutWidth ( ) const

inline

Definition at line 420 of file DDEcalBarrelNewAlgo.cc.

References m_PincerCutWidth.

Referenced by execute().

420 { return m_PincerCutWidth; }

DDEcalBarrelNewAlgo::m_PincerCutWidth

double m_PincerCutWidth

Definition: DDEcalBarrelNewAlgo.cc:799

◆ pincerEnvHeight()

double DDEcalBarrelNewAlgo::pincerEnvHeight ( ) const

inline

Definition at line 403 of file DDEcalBarrelNewAlgo.cc.

References m_PincerEnvHeight.

Referenced by execute().

403 { return m_PincerEnvHeight; }

DDEcalBarrelNewAlgo::m_PincerEnvHeight

double DDEcalBarrelNewAlgo::pincerEnvWidth ( ) const

inline

Definition at line 402 of file DDEcalBarrelNewAlgo.cc.

References m_PincerEnvWidth.

Referenced by execute().

402 { return m_PincerEnvWidth; }

DDEcalBarrelNewAlgo::m_PincerEnvWidth

double DDEcalBarrelNewAlgo::pincerShim1Width ( ) const

inline

Definition at line 415 of file DDEcalBarrelNewAlgo.cc.

References m_PincerShim1Width.

Referenced by execute().

415 { return m_PincerShim1Width; }

DDEcalBarrelNewAlgo::m_PincerShim1Width

double m_PincerShim1Width

Definition: DDEcalBarrelNewAlgo.cc:794

◆ pincerShim2Name()

DDName DDEcalBarrelNewAlgo::pincerShim2Name ( ) const

inline

Definition at line 413 of file DDEcalBarrelNewAlgo.cc.

References ddname(), and m_PincerShim2Name.

Referenced by execute().

413 { return ddname(m_PincerShim2Name); }

DDEcalBarrelNewAlgo::m_PincerShim2Name

std::string m_PincerShim2Name

Definition: DDEcalBarrelNewAlgo.cc:792

DDEcalBarrelNewAlgo::ddname

DDName ddname(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3738

◆ pincerShim2Width()

double DDEcalBarrelNewAlgo::pincerShim2Width ( ) const

inline

Definition at line 416 of file DDEcalBarrelNewAlgo.cc.

References m_PincerShim2Width.

Referenced by execute().

416 { return m_PincerShim2Width; }

DDEcalBarrelNewAlgo::m_PincerShim2Width

double DDEcalBarrelNewAlgo::sglThick ( ) const

inline

Definition at line 177 of file DDEcalBarrelNewAlgo.cc.

References m_SGLThick.

Referenced by execute().

177 { return m_SGLThick; }

DDEcalBarrelNewAlgo::m_SGLThick

double m_SGLThick

Definition: DDEcalBarrelNewAlgo.cc:561

◆ spmCutName()

DDName DDEcalBarrelNewAlgo::spmCutName ( ) const

inline

Definition at line 94 of file DDEcalBarrelNewAlgo.cc.

References ddname(), and m_SpmCutName.

Referenced by execute().

94 { return ddname(m_SpmCutName); }

DDEcalBarrelNewAlgo::ddname

DDName ddname(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3738

DDEcalBarrelNewAlgo::m_SpmCutName

std::string m_SpmCutName

Definition: DDEcalBarrelNewAlgo.cc:469

◆ spmCutRM()

double DDEcalBarrelNewAlgo::spmCutRM ( ) const

inline

Definition at line 97 of file DDEcalBarrelNewAlgo.cc.

References m_SpmCutRM.

Referenced by execute().

97 { return m_SpmCutRM; }

DDEcalBarrelNewAlgo::m_SpmCutRM

double m_SpmCutRM

Definition: DDEcalBarrelNewAlgo.cc:474

◆ spmCutRP()

double DDEcalBarrelNewAlgo::spmCutRP ( ) const

inline

Definition at line 98 of file DDEcalBarrelNewAlgo.cc.

References m_SpmCutRP.

Referenced by execute().

98 { return m_SpmCutRP; }

DDEcalBarrelNewAlgo::m_SpmCutRP

double m_SpmCutRP

Definition: DDEcalBarrelNewAlgo.cc:475

◆ spmCutShow()

int DDEcalBarrelNewAlgo::spmCutShow ( ) const

inline

Definition at line 96 of file DDEcalBarrelNewAlgo.cc.

References m_SpmCutShow.

Referenced by execute().

96 { return m_SpmCutShow; }

DDEcalBarrelNewAlgo::m_SpmCutShow

int m_SpmCutShow

Definition: DDEcalBarrelNewAlgo.cc:471

◆ spmCutThick()

double DDEcalBarrelNewAlgo::spmCutThick ( ) const

inline

Definition at line 95 of file DDEcalBarrelNewAlgo.cc.

References m_SpmCutThick.

Referenced by execute().

95 { return m_SpmCutThick; }

DDEcalBarrelNewAlgo::m_SpmCutThick

double m_SpmCutThick

Definition: DDEcalBarrelNewAlgo.cc:470

◆ spmDelPhi()

double DDEcalBarrelNewAlgo::spmDelPhi ( ) const

inline

Definition at line 91 of file DDEcalBarrelNewAlgo.cc.

References m_SpmDelPhi.

Referenced by execute().

91 { return m_SpmDelPhi; }

DDEcalBarrelNewAlgo::m_SpmDelPhi

double m_SpmDelPhi

Definition: DDEcalBarrelNewAlgo.cc:466

◆ spmExpThick()

double DDEcalBarrelNewAlgo::spmExpThick ( ) const

inline

Definition at line 101 of file DDEcalBarrelNewAlgo.cc.

References m_SpmExpThick.

101 { return m_SpmExpThick; }

DDEcalBarrelNewAlgo::m_SpmExpThick

double m_SpmExpThick

Definition: DDEcalBarrelNewAlgo.cc:476

◆ spmExpWide()

double DDEcalBarrelNewAlgo::spmExpWide ( ) const

inline

Definition at line 102 of file DDEcalBarrelNewAlgo.cc.

References m_SpmExpWide.

102 { return m_SpmExpWide; }

DDEcalBarrelNewAlgo::m_SpmExpWide

double m_SpmExpWide

Definition: DDEcalBarrelNewAlgo.cc:477

◆ spmExpYOff()

double DDEcalBarrelNewAlgo::spmExpYOff ( ) const

inline

Definition at line 103 of file DDEcalBarrelNewAlgo.cc.

References m_SpmExpYOff.

103 { return m_SpmExpYOff; }

DDEcalBarrelNewAlgo::m_SpmExpYOff

unsigned int DDEcalBarrelNewAlgo::spmNPerHalf ( ) const

inline

Definition at line 89 of file DDEcalBarrelNewAlgo.cc.

References m_SpmNPerHalf.

Referenced by execute().

89 { return m_SpmNPerHalf; }

DDEcalBarrelNewAlgo::m_SpmNPerHalf

unsigned int m_SpmNPerHalf

Definition: DDEcalBarrelNewAlgo.cc:464

◆ spmPhiOff()

double DDEcalBarrelNewAlgo::spmPhiOff ( ) const

inline

Definition at line 92 of file DDEcalBarrelNewAlgo.cc.

References m_SpmPhiOff.

Referenced by execute().

92 { return m_SpmPhiOff; }

DDEcalBarrelNewAlgo::m_SpmPhiOff

double DDEcalBarrelNewAlgo::spmSideThick ( ) const

inline

Definition at line 107 of file DDEcalBarrelNewAlgo.cc.

References m_SpmSideThick.

Referenced by execute().

107 { return m_SpmSideThick; }

DDEcalBarrelNewAlgo::m_SpmSideThick

double m_SpmSideThick

Definition: DDEcalBarrelNewAlgo.cc:482

◆ spmSideYOffM()

double DDEcalBarrelNewAlgo::spmSideYOffM ( ) const

inline

Definition at line 108 of file DDEcalBarrelNewAlgo.cc.

References m_SpmSideYOffM.

Referenced by execute().

108 { return m_SpmSideYOffM; }

DDEcalBarrelNewAlgo::m_SpmSideYOffM

double m_SpmSideYOffM

Definition: DDEcalBarrelNewAlgo.cc:483

◆ spmSideYOffP()

double DDEcalBarrelNewAlgo::spmSideYOffP ( ) const

inline

Definition at line 109 of file DDEcalBarrelNewAlgo.cc.

References m_SpmSideYOffP.

Referenced by execute().

109 { return m_SpmSideYOffP; }

DDEcalBarrelNewAlgo::m_SpmSideYOffP

double m_SpmSideYOffP

Definition: DDEcalBarrelNewAlgo.cc:484

◆ underAF()

double DDEcalBarrelNewAlgo::underAF ( ) const

inline

Definition at line 119 of file DDEcalBarrelNewAlgo.cc.

References m_UnderAF.

Referenced by execute().

119 { return m_UnderAF; }

DDEcalBarrelNewAlgo::m_UnderAF

double m_UnderAF

Definition: DDEcalBarrelNewAlgo.cc:494

◆ underAR()

double DDEcalBarrelNewAlgo::underAR ( ) const

inline

Definition at line 123 of file DDEcalBarrelNewAlgo.cc.

References m_UnderAR.

Referenced by execute().

123 { return m_UnderAR; }

DDEcalBarrelNewAlgo::m_UnderAR

double m_UnderAR

Definition: DDEcalBarrelNewAlgo.cc:498

◆ underBF()

double DDEcalBarrelNewAlgo::underBF ( ) const

inline

Definition at line 121 of file DDEcalBarrelNewAlgo.cc.

References m_UnderBF.

Referenced by execute().

121 { return m_UnderBF; }

DDEcalBarrelNewAlgo::m_UnderBF

double m_UnderBF

Definition: DDEcalBarrelNewAlgo.cc:496

◆ underBR()

double DDEcalBarrelNewAlgo::underBR ( ) const

inline

Definition at line 124 of file DDEcalBarrelNewAlgo.cc.

References m_UnderBR.

Referenced by execute().

124 { return m_UnderBR; }

DDEcalBarrelNewAlgo::m_UnderBR

double m_UnderBR

Definition: DDEcalBarrelNewAlgo.cc:499

◆ underCF()

double DDEcalBarrelNewAlgo::underCF ( ) const

inline

Definition at line 122 of file DDEcalBarrelNewAlgo.cc.

References m_UnderCF.

Referenced by execute().

122 { return m_UnderCF; }

DDEcalBarrelNewAlgo::m_UnderCF

double m_UnderCF

Definition: DDEcalBarrelNewAlgo.cc:497

DDMaterial DDEcalBarrelNewAlgo::wallMat ( ) const

inline

Definition at line 151 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_WallMat.

Referenced by execute().

151 { return ddmat(m_WallMat); }

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

DDEcalBarrelNewAlgo::m_WallMat

std::string m_WallMat

Definition: DDEcalBarrelNewAlgo.cc:526

◆ wallName()

const std::string& DDEcalBarrelNewAlgo::wallName ( ) const

inline

Definition at line 146 of file DDEcalBarrelNewAlgo.cc.

References m_WallName.

Referenced by execute().

146 { return m_WallName; }

DDEcalBarrelNewAlgo::m_WallName

std::string m_WallName

Definition: DDEcalBarrelNewAlgo.cc:521

◆ wallReAlv()

double DDEcalBarrelNewAlgo::wallReAlv ( ) const

inline

Definition at line 136 of file DDEcalBarrelNewAlgo.cc.

References m_WallReAlv.

Referenced by execute().

136 { return m_WallReAlv; }

DDEcalBarrelNewAlgo::m_WallReAlv

double m_WallReAlv

Definition: DDEcalBarrelNewAlgo.cc:511

◆ wallThAlv()

double DDEcalBarrelNewAlgo::wallThAlv ( ) const

inline

Definition at line 127 of file DDEcalBarrelNewAlgo.cc.

References m_WallThAlv.

Referenced by execute().

127 { return m_WallThAlv; }

DDEcalBarrelNewAlgo::m_WallThAlv

double m_WallThAlv

Definition: DDEcalBarrelNewAlgo.cc:502

◆ web()

void DDEcalBarrelNewAlgo::web	(	unsigned int	iWeb,
		double	bWeb,
		double	BWeb,
		double	LWeb,
		double	theta,
		const Pt3D &	corner,
		const DDLogicalPart &	logPar,
		double &	zee,
		double	side,
		double	front,
		double	delta,
		DDCompactView &	cpv
	)

private

Definition at line 3757 of file DDEcalBarrelNewAlgo.cc.

References EcalTrapezoidParameters::a(), EcalTrapezoidParameters::A(), EcalTrapezoidParameters::b(), EcalTrapezoidParameters::B(), HLT_2023v12_cff::beta, TCMET_cfi::corner, funct::cos(), dumpMFGeometry_cfg::delta, EcalTrapezoidParameters::h(), EcalTrapezoidParameters::L(), myrot(), mytrap(), DDName::name(), DDBase< N, C >::name(), DDCompactView::position(), ALPAKA_ACCELERATOR_NAMESPACE::ecal::reconstruction::internal::barrel::side(), funct::sin(), theta(), to_string(), vecWebClrTh(), vecWebLength(), vecWebPlTh(), EcalTrapezoidParameters::vertexList(), webClrMat(), webClrName(), webHere(), webPlMat(), and webPlName().

Referenced by execute().

                                                   {
   const unsigned int copyOne(1);
 
   const double LWebx(vecWebLength()[iWeb]);
 
   const double BWebx(bWeb + (BWeb - bWeb) * LWebx / LWeb);
 
   const double thick(vecWebPlTh()[iWeb] + vecWebClrTh()[iWeb]);
   const Trap trapWebClr(BWebx / 2,     // A/2
                         bWeb / 2,      // a/2
                         bWeb / 2,      // b/2
                         thick / 2,     // H/2
                         thick / 2,     // h/2
                         LWebx / 2,     // L/2
                         90 * deg,      // alfa1
                         bWeb - BWebx,  // x15
                         0              // y15
   );
   const DDName webClrDDName(webClrName() + std::to_string(iWeb));
   const DDSolid webClrSolid(mytrap(webClrDDName.name(), trapWebClr));
   const DDLogicalPart webClrLog(webClrDDName, webClrMat(), webClrSolid);
 
   const Trap trapWebPl(trapWebClr.A() / 2,               // A/2
                        trapWebClr.a() / 2,               // a/2
                        trapWebClr.b() / 2,               // b/2
                        vecWebPlTh()[iWeb] / 2,           // H/2
                        vecWebPlTh()[iWeb] / 2,           // h/2
                        trapWebClr.L() / 2.,              // L/2
                        90 * deg,                         // alfa1
                        trapWebClr.b() - trapWebClr.B(),  // x15
                        0                                 // y15
   );
   const DDName webPlDDName(webPlName() + std::to_string(iWeb));
   const DDSolid webPlSolid(mytrap(webPlDDName.fullname(), trapWebPl));
   const DDLogicalPart webPlLog(webPlDDName, webPlMat(), webPlSolid);
 
   cpv.position(webPlLog,  // place plate inside clearance volume
                webClrDDName,
                copyOne,
                DDTranslation(0, 0, 0),
                DDRotation());
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("EBGeomX") << webPlLog.name() << ":" << copyOne << " positioned in " << webClrDDName << " at "
                               << DDTranslation(0, 0, 0) << " with no rotation";
 #endif
   const Trap::VertexList vWeb(trapWebClr.vertexList());
 
   zee += trapWebClr.h() / sin(theta);
 
   const double beta(theta + delta);
 
   const double zWeb(zee - front * cos(beta) + side * sin(beta));
   const double yWeb(front * sin(beta) + side * cos(beta));
 
   const Pt3D wedge3(corner + Pt3D(0, -yWeb, zWeb));
   const Pt3D wedge2(wedge3 + Pt3D(0, trapWebClr.h() * cos(theta), -trapWebClr.h() * sin(theta)));
   const Pt3D wedge1(wedge3 + Pt3D(trapWebClr.a(), 0, 0));
 
 #ifdef EDM_ML_DEBUG
   edm::LogVerbatim("EcalGeom") << "trap1=" << vWeb[0] << ", trap2=" << vWeb[2] << ", trap3=" << vWeb[3];
 
   edm::LogVerbatim("EcalGeom") << "wedge1=" << wedge1 << ", wedge2=" << wedge2 << ", wedge3=" << wedge3;
 #endif
   const Tf3D tForm(vWeb[0], vWeb[2], vWeb[3], wedge1, wedge2, wedge3);
 
   if (0 != webHere()) {
     cpv.position(webClrLog,
                  logPar,
                  copyOne,
                  DDTranslation(tForm.getTranslation().x(), tForm.getTranslation().y(), tForm.getTranslation().z()),
                  myrot(webClrLog.name().name() + std::to_string(iWeb), tForm.getRotation()));
 #ifdef EDM_ML_DEBUG
     edm::LogVerbatim("EBGeomX") << webClrLog.name() << ":" << copyOne << " positioned in " << logPar.name() << " at "
                                 << DDTranslation(tForm.getTranslation().x(),
                                                  tForm.getTranslation().y(),
                                                  tForm.getTranslation().z())
                                 << " with rotation";
 #endif
   }
 }

◆ webClrMat()

DDMaterial DDEcalBarrelNewAlgo::webClrMat ( ) const

inline

Definition at line 199 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_WebClrMat.

Referenced by web().

199 { return ddmat(m_WebClrMat); }

DDEcalBarrelNewAlgo::m_WebClrMat

std::string m_WebClrMat

Definition: DDEcalBarrelNewAlgo.cc:575

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

◆ webClrName()

const std::string& DDEcalBarrelNewAlgo::webClrName ( ) const

inline

Definition at line 197 of file DDEcalBarrelNewAlgo.cc.

References m_WebClrName.

Referenced by web().

197 { return m_WebClrName; }

DDEcalBarrelNewAlgo::m_WebClrName

std::string m_WebClrName

Definition: DDEcalBarrelNewAlgo.cc:573

◆ webHere()

double DDEcalBarrelNewAlgo::webHere ( ) const

inline

Definition at line 195 of file DDEcalBarrelNewAlgo.cc.

References m_WebHere.

Referenced by web().

195 { return m_WebHere; }

DDEcalBarrelNewAlgo::m_WebHere

double m_WebHere

Definition: DDEcalBarrelNewAlgo.cc:571

◆ webPlMat()

DDMaterial DDEcalBarrelNewAlgo::webPlMat ( ) const

inline

Definition at line 198 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_WebPlMat.

Referenced by web().

198 { return ddmat(m_WebPlMat); }

DDEcalBarrelNewAlgo::m_WebPlMat

std::string m_WebPlMat

Definition: DDEcalBarrelNewAlgo.cc:574

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

◆ webPlName()

const std::string& DDEcalBarrelNewAlgo::webPlName ( ) const

inline

Definition at line 196 of file DDEcalBarrelNewAlgo.cc.

References m_WebPlName.

Referenced by web().

196 { return m_WebPlName; }

DDEcalBarrelNewAlgo::m_WebPlName

std::string m_WebPlName

Definition: DDEcalBarrelNewAlgo.cc:572

◆ wrapFrAlv()

double DDEcalBarrelNewAlgo::wrapFrAlv ( ) const

inline

Definition at line 133 of file DDEcalBarrelNewAlgo.cc.

References m_WrapFrAlv.

Referenced by execute().

133 { return m_WrapFrAlv; }

DDEcalBarrelNewAlgo::m_WrapFrAlv

double m_WrapFrAlv

Definition: DDEcalBarrelNewAlgo.cc:508

◆ wrapMat()

DDMaterial DDEcalBarrelNewAlgo::wrapMat ( ) const

inline

Definition at line 150 of file DDEcalBarrelNewAlgo.cc.

References ddmat(), and m_WrapMat.

Referenced by execute().

150 { return ddmat(m_WrapMat); }

DDEcalBarrelNewAlgo::m_WrapMat

std::string m_WrapMat

Definition: DDEcalBarrelNewAlgo.cc:525

DDEcalBarrelNewAlgo::ddmat

DDMaterial ddmat(const std::string &s) const

Definition: DDEcalBarrelNewAlgo.cc:3736

◆ wrapName()

const std::string& DDEcalBarrelNewAlgo::wrapName ( ) const

inline

Definition at line 145 of file DDEcalBarrelNewAlgo.cc.

References m_WrapName.

Referenced by execute().

145 { return m_WrapName; }

DDEcalBarrelNewAlgo::m_WrapName

std::string m_WrapName

Definition: DDEcalBarrelNewAlgo.cc:520

◆ wrapReAlv()

double DDEcalBarrelNewAlgo::wrapReAlv ( ) const

inline

Definition at line 137 of file DDEcalBarrelNewAlgo.cc.

References m_WrapReAlv.

Referenced by execute().

137 { return m_WrapReAlv; }

DDEcalBarrelNewAlgo::m_WrapReAlv

double m_WrapReAlv

Definition: DDEcalBarrelNewAlgo.cc:512

◆ wrapThAlv()

double DDEcalBarrelNewAlgo::wrapThAlv ( ) const

inline

Definition at line 128 of file DDEcalBarrelNewAlgo.cc.

References m_WrapThAlv.

Referenced by execute().

128 { return m_WrapThAlv; }

double DDEcalBarrelNewAlgo::m_WrapThAlv

private

Definition at line 503 of file DDEcalBarrelNewAlgo.cc.

Referenced by initialize(), and wrapThAlv().

Public Types

Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Member Typedef Documentation

◆ Pt3D

◆ RfZ3D

◆ Ro3D

◆ Rota

◆ RoX3D

◆ RoY3D

◆ RoZ3D

◆ Tf3D

◆ Tl3D

◆ Trap

◆ Vec3

Constructor & Destructor Documentation

◆ DDEcalBarrelNewAlgo()

◆ ~DDEcalBarrelNewAlgo()

Member Function Documentation

◆ aglMat()

◆ aglName()

◆ aglThick()

◆ andMat()

◆ andName()

◆ andThick()

◆ apdMat()

◆ apdName()

◆ apdSide()

◆ apdThick()

◆ apdX1()

◆ apdX2()

◆ apdZ()

◆ atjMat()

◆ atjName()

◆ atjThick()

◆ backBracketHeight()

◆ backBracketMat()

◆ backBracketName()

◆ backCBStdSep()

◆ backCoolBarHeight()

◆ backCoolBarHere()

◆ backCoolBarMat()

◆ backCoolBarName()

◆ backCoolBarSSMat()

◆ backCoolBarSSName()

◆ backCoolBarSSThick()

◆ backCoolBarThick()

◆ backCoolBarWaMat()

◆ backCoolBarWaName()

◆ backCoolBarWaThick()

◆ backCoolBarWidth()

◆ backCoolHere()

◆ backCoolMat()

◆ backCoolTankHere()

◆ backCoolTankMat()

◆ backCoolTankName()

◆ backCoolTankThick()

◆ backCoolTankWaMat()

◆ backCoolTankWaName()

◆ backCoolTankWaWidth()

◆ backCoolTankWidth()

◆ backCoolVFEHere()

◆ backCoolVFEMat()

◆ backCoolVFEName()

◆ backHere()

◆ backMiscHere()

◆ backPipeHere()

◆ backPipeMat()

◆ backPipeName()

◆ backPipeWaterMat()

◆ backPlate2Mat()

◆ backPlate2Name()

◆ backPlate2Thick()

◆ backPlateHere()

◆ backPlateLength()

◆ backPlateMat()

◆ backPlateName()

◆ backPlateThick()