VirtualJetProducer.cc

Go to the documentation of this file.

//
// VirtualJetProducer
// ------------------
//
//            04/21/2009 Philipp Schieferdecker <philipp.schieferdecker@cern.ch>

#include "FWCore/ParameterSet/interface/ConfigurationDescriptions.h"
#include "FWCore/ParameterSet/interface/ParameterSetDescription.h"
#include "RecoJets/JetProducers/plugins/VirtualJetProducer.h"
#include "RecoJets/JetProducers/interface/BackgroundEstimator.h"
#include "RecoJets/JetProducers/interface/VirtualJetProducerHelper.h"

#include "DataFormats/Common/interface/RefProd.h"
#include "DataFormats/Common/interface/Ref.h"
#include "DataFormats/Common/interface/RefVector.h"

#include "FWCore/Framework/interface/Event.h"
#include "FWCore/Framework/interface/EventSetup.h"
#include "FWCore/Framework/interface/ESHandle.h"
#include "FWCore/Utilities/interface/Exception.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"
#include "FWCore/Framework/interface/MakerMacros.h"
#include "FWCore/Utilities/interface/isFinite.h"
#include "FWCore/Framework/interface/ConsumesCollector.h"

#include "DataFormats/Common/interface/View.h"
#include "DataFormats/Common/interface/Handle.h"
#include "DataFormats/VertexReco/interface/Vertex.h"
#include "DataFormats/VertexReco/interface/VertexFwd.h"
#include "DataFormats/JetReco/interface/CaloJetCollection.h"
#include "DataFormats/JetReco/interface/GenJetCollection.h"
#include "DataFormats/JetReco/interface/PFJetCollection.h"
#include "DataFormats/JetReco/interface/BasicJetCollection.h"
#include "DataFormats/JetReco/interface/TrackJetCollection.h"
#include "DataFormats/JetReco/interface/PFClusterJetCollection.h"
#include "DataFormats/Candidate/interface/CandidateFwd.h"
#include "DataFormats/Candidate/interface/LeafCandidate.h"
#include "DataFormats/Math/interface/deltaR.h"
#include "DataFormats/ParticleFlowCandidate/interface/PFCandidate.h"

#include "Geometry/Records/interface/CaloGeometryRecord.h"
#include "Geometry/Records/interface/HcalRecNumberingRecord.h"

#include "fastjet/SISConePlugin.hh"
#include "fastjet/CMSIterativeConePlugin.hh"
#include "fastjet/ATLASConePlugin.hh"
#include "fastjet/CDFMidPointPlugin.hh"

#include <iostream>
#include <memory>
#include <algorithm>
#include <limits>
#include <cmath>
#include <vdt/vdtMath.h>

using namespace std;
using namespace edm;

namespace reco {
  namespace helper {
    struct GreaterByPtPseudoJet {
      bool operator()(const fastjet::PseudoJet& t1, const fastjet::PseudoJet& t2) const {
        return t1.perp2() > t2.perp2();
      }
    };

  }  // namespace helper
}  // namespace reco

//______________________________________________________________________________
const char* const VirtualJetProducer::JetType::names[] = {
    "BasicJet", "GenJet", "CaloJet", "PFJet", "TrackJet", "PFClusterJet"};

//______________________________________________________________________________
VirtualJetProducer::JetType::Type VirtualJetProducer::JetType::byName(const string& name) {
  const char* const* pos = std::find(names, names + LastJetType, name);
  if (pos == names + LastJetType) {
    std::string errorMessage = "Requested jetType not supported: " + name + "\n";
    throw cms::Exception("Configuration", errorMessage);
  }
  return (Type)(pos - names);
}

void VirtualJetProducer::makeProduces(std::string alias, std::string tag) {
  if (writeCompound_) {
    produces<reco::BasicJetCollection>();
  }

  if (writeJetsWithConst_) {
    produces<reco::PFCandidateCollection>(tag).setBranchAlias(alias);
    produces<reco::PFJetCollection>();
  } else {
    if (makeCaloJet(jetTypeE)) {
      produces<reco::CaloJetCollection>(tag).setBranchAlias(alias);
    } else if (makePFJet(jetTypeE)) {
      produces<reco::PFJetCollection>(tag).setBranchAlias(alias);
    } else if (makeGenJet(jetTypeE)) {
      produces<reco::GenJetCollection>(tag).setBranchAlias(alias);
    } else if (makeTrackJet(jetTypeE)) {
      produces<reco::TrackJetCollection>(tag).setBranchAlias(alias);
    } else if (makePFClusterJet(jetTypeE)) {
      produces<reco::PFClusterJetCollection>(tag).setBranchAlias(alias);
    } else if (makeBasicJet(jetTypeE)) {
      produces<reco::BasicJetCollection>(tag).setBranchAlias(alias);
    }
  }
}

// construction / destruction

//______________________________________________________________________________
VirtualJetProducer::VirtualJetProducer(const edm::ParameterSet& iConfig) {
  moduleLabel_ = iConfig.getParameter<string>("@module_label");
  src_ = iConfig.getParameter<edm::InputTag>("src");
  srcPVs_ = iConfig.getParameter<edm::InputTag>("srcPVs");
  jetType_ = iConfig.getParameter<string>("jetType");
  jetAlgorithm_ = iConfig.getParameter<string>("jetAlgorithm");
  rParam_ = iConfig.getParameter<double>("rParam");
  inputEtMin_ = iConfig.getParameter<double>("inputEtMin");
  inputEMin_ = iConfig.getParameter<double>("inputEMin");
  jetPtMin_ = iConfig.getParameter<double>("jetPtMin");
  doPVCorrection_ = iConfig.getParameter<bool>("doPVCorrection");
  doAreaFastjet_ = iConfig.getParameter<bool>("doAreaFastjet");
  doRhoFastjet_ = iConfig.getParameter<bool>("doRhoFastjet");
  jetCollInstanceName_ = iConfig.getParameter<string>("jetCollInstanceName");
  doPUOffsetCorr_ = iConfig.getParameter<bool>("doPUOffsetCorr");
  puSubtractorName_ = iConfig.getParameter<string>("subtractorName");
  useExplicitGhosts_ =
      iConfig.getParameter<bool>("useExplicitGhosts");  // use explicit ghosts in the fastjet clustering sequence?
  doAreaDiskApprox_ = iConfig.getParameter<bool>("doAreaDiskApprox");
  voronoiRfact_ = iConfig.getParameter<double>(
      "voronoiRfact");  // Voronoi-based area calculation allows for an empirical scale factor
  rhoEtaMax_ = iConfig.getParameter<double>(
      "Rho_EtaMax");  // do fasjet area / rho calcluation? => accept corresponding parameters
  ghostEtaMax_ = iConfig.getParameter<double>("Ghost_EtaMax");
  activeAreaRepeats_ = iConfig.getParameter<int>("Active_Area_Repeats");
  ghostArea_ = iConfig.getParameter<double>("GhostArea");
  restrictInputs_ = iConfig.getParameter<bool>("restrictInputs");  // restrict inputs to first "maxInputs" towers?
  maxInputs_ = iConfig.getParameter<unsigned int>("maxInputs");
  writeCompound_ = iConfig.getParameter<bool>(
      "writeCompound");  // Check to see if we are writing compound jets for substructure and jet grooming
  writeJetsWithConst_ = iConfig.getParameter<bool>("writeJetsWithConst");  //write subtracted jet constituents
  doFastJetNonUniform_ = iConfig.getParameter<bool>("doFastJetNonUniform");
  puCenters_ = iConfig.getParameter<vector<double>>("puCenters");
  puWidth_ = iConfig.getParameter<double>("puWidth");
  nExclude_ = iConfig.getParameter<unsigned int>("nExclude");
  useDeterministicSeed_ = iConfig.getParameter<bool>("useDeterministicSeed");
  minSeed_ = iConfig.getParameter<unsigned int>("minSeed");
  verbosity_ = iConfig.getParameter<int>("verbosity");
  applyWeight_ = iConfig.getParameter<bool>("applyWeight");
  if (applyWeight_) {
    edm::InputTag srcWeights = iConfig.getParameter<edm::InputTag>("srcWeights");
    if (srcWeights.label() == src_.label())
      LogWarning("VirtualJetProducer")
          << "Particle and weights collection have the same label. You may be applying the same weights twice.\n";
    if (!srcWeights.label().empty())
      input_weights_token_ = consumes<edm::ValueMap<float>>(srcWeights);
  }

  anomalousTowerDef_ = std::make_unique<AnomalousTower>(iConfig);

  input_vertex_token_ = consumes<reco::VertexCollection>(srcPVs_);
  input_candidateview_token_ = consumes<reco::CandidateView>(src_);
  input_candidatefwdptr_token_ =
      consumes<vector<edm::FwdPtr<reco::PFCandidate>>>(iConfig.getParameter<edm::InputTag>("src"));
  input_packedcandidatefwdptr_token_ =
      consumes<vector<edm::FwdPtr<pat::PackedCandidate>>>(iConfig.getParameter<edm::InputTag>("src"));
  input_gencandidatefwdptr_token_ =
      consumes<vector<edm::FwdPtr<reco::GenParticle>>>(iConfig.getParameter<edm::InputTag>("src"));
  input_packedgencandidatefwdptr_token_ =
      consumes<vector<edm::FwdPtr<pat::PackedGenParticle>>>(iConfig.getParameter<edm::InputTag>("src"));

  //
  // additional parameters to think about:
  // - overlap threshold (set to 0.75 for the time being)
  // - p parameter for generalized kT (set to -2 for the time being)
  // - fastjet PU subtraction parameters (not yet considered)
  //
  if (jetAlgorithm_ == "Kt")
    fjJetDefinition_ = std::make_shared<fastjet::JetDefinition>(fastjet::kt_algorithm, rParam_);

  else if (jetAlgorithm_ == "CambridgeAachen")
    fjJetDefinition_ = std::make_shared<fastjet::JetDefinition>(fastjet::cambridge_algorithm, rParam_);

  else if (jetAlgorithm_ == "AntiKt")
    fjJetDefinition_ = std::make_shared<fastjet::JetDefinition>(fastjet::antikt_algorithm, rParam_);

  else if (jetAlgorithm_ == "GeneralizedKt")
    fjJetDefinition_ = std::make_shared<fastjet::JetDefinition>(fastjet::genkt_algorithm, rParam_, -2);

  else if (jetAlgorithm_ == "SISCone") {
    fjPlugin_ = PluginPtr(new fastjet::SISConePlugin(rParam_, 0.75, 0, 0.0, false, fastjet::SISConePlugin::SM_pttilde));
    fjJetDefinition_ = std::make_shared<fastjet::JetDefinition>(&*fjPlugin_);

  } else if (jetAlgorithm_ == "IterativeCone") {
    fjPlugin_ = PluginPtr(new fastjet::CMSIterativeConePlugin(rParam_, 1.0));
    fjJetDefinition_ = std::make_shared<fastjet::JetDefinition>(&*fjPlugin_);

  } else if (jetAlgorithm_ == "CDFMidPoint") {
    fjPlugin_ = PluginPtr(new fastjet::CDFMidPointPlugin(rParam_, 0.75));
    fjJetDefinition_ = std::make_shared<fastjet::JetDefinition>(&*fjPlugin_);

  } else if (jetAlgorithm_ == "ATLASCone") {
    fjPlugin_ = PluginPtr(new fastjet::ATLASConePlugin(rParam_));
    fjJetDefinition_ = std::make_shared<fastjet::JetDefinition>(&*fjPlugin_);

  } else {
    throw cms::Exception("Invalid jetAlgorithm") << "Jet algorithm for VirtualJetProducer is invalid, Abort!\n";
  }

  jetTypeE = JetType::byName(jetType_);

  if (JetType::CaloJet == jetTypeE) {
    geometry_token_ = esConsumes();
    topology_token_ = esConsumes();
  }

  if (doPUOffsetCorr_) {
    if (puSubtractorName_.empty()) {
      LogWarning("VirtualJetProducer")
          << "Pile Up correction on; however, pile up type is not specified. Using default... \n";
      subtractor_ = std::make_shared<PileUpSubtractor>(iConfig, consumesCollector());
    } else
      subtractor_ = std::shared_ptr<PileUpSubtractor>(
          PileUpSubtractorFactory::get()->create(puSubtractorName_, iConfig, consumesCollector()));
  }

  // do approximate disk-based area calculation => warn if conflicting request
  if (doAreaDiskApprox_ && doAreaFastjet_)
    throw cms::Exception("Conflicting area calculations")
        << "Both the calculation of jet area via fastjet and via an analytical disk approximation have been requested. "
           "Please decide on one.\n";

  if (doAreaFastjet_ || doRhoFastjet_) {
    if (voronoiRfact_ <= 0) {
      fjActiveArea_ = std::make_shared<fastjet::GhostedAreaSpec>(ghostEtaMax_, activeAreaRepeats_, ghostArea_);

      if (!useExplicitGhosts_) {
        fjAreaDefinition_ = std::make_shared<fastjet::AreaDefinition>(fastjet::active_area, *fjActiveArea_);
      } else {
        fjAreaDefinition_ =
            std::make_shared<fastjet::AreaDefinition>(fastjet::active_area_explicit_ghosts, *fjActiveArea_);
      }
    }
    fjSelector_ = std::make_shared<fastjet::Selector>(fastjet::SelectorAbsRapMax(rhoEtaMax_));
  }

  if ((doFastJetNonUniform_) && (puCenters_.empty()))
    throw cms::Exception("doFastJetNonUniform")
        << "Parameter puCenters for doFastJetNonUniform is not defined." << std::endl;

  // make the "produces" statements
  makeProduces(moduleLabel_, jetCollInstanceName_);
  produces<vector<double>>("rhos");
  produces<vector<double>>("sigmas");
  produces<double>("rho");
  produces<double>("sigma");
}

//______________________________________________________________________________
VirtualJetProducer::~VirtualJetProducer() {}

// implementation of member functions

//______________________________________________________________________________
void VirtualJetProducer::produce(edm::Event& iEvent, const edm::EventSetup& iSetup) {
  // If requested, set the fastjet random seed to a deterministic function
  // of the run/lumi/event.
  // NOTE!!! The fastjet random number sequence is a global singleton.
  // Thus, we have to create an object and get access to the global singleton
  // in order to change it.
  if (useDeterministicSeed_) {
    fastjet::GhostedAreaSpec gas;
    std::vector<int> seeds(2);
    unsigned int runNum_uint = static_cast<unsigned int>(iEvent.id().run());
    unsigned int evNum_uint = static_cast<unsigned int>(iEvent.id().event());
    seeds[0] = std::max(runNum_uint, minSeed_ + 3) + 3 * evNum_uint;
    seeds[1] = std::max(runNum_uint, minSeed_ + 5) + 5 * evNum_uint;
    gas.set_random_status(seeds);
  }

  LogDebug("VirtualJetProducer") << "Entered produce\n";
  //determine signal vertex2
  vertex_ = reco::Jet::Point(0, 0, 0);
  if ((makeCaloJet(jetTypeE) || makePFJet(jetTypeE)) && doPVCorrection_) {
    LogDebug("VirtualJetProducer") << "Adding PV info\n";
    edm::Handle<reco::VertexCollection> pvCollection;
    iEvent.getByToken(input_vertex_token_, pvCollection);
    if (!pvCollection->empty())
      vertex_ = pvCollection->begin()->position();
  }

  // Get Weights Collection
  if ((applyWeight_) && (!input_weights_token_.isUninitialized()))
    weights_ = iEvent.get(input_weights_token_);

  // For Pileup subtraction using offset correction:
  // set up geometry map
  if (doPUOffsetCorr_) {
    subtractor_->setupGeometryMap(iEvent, iSetup);
  }

  // clear data
  LogDebug("VirtualJetProducer") << "Clear data\n";
  fjInputs_.clear();
  fjJets_.clear();
  inputs_.clear();

  // get inputs and convert them to the fastjet format (fastjet::PeudoJet)
  edm::Handle<reco::CandidateView> inputsHandle;

  edm::Handle<std::vector<edm::FwdPtr<reco::PFCandidate>>> pfinputsHandleAsFwdPtr;
  edm::Handle<std::vector<edm::FwdPtr<pat::PackedCandidate>>> packedinputsHandleAsFwdPtr;
  edm::Handle<std::vector<edm::FwdPtr<reco::GenParticle>>> geninputsHandleAsFwdPtr;
  edm::Handle<std::vector<edm::FwdPtr<pat::PackedGenParticle>>> packedgeninputsHandleAsFwdPtr;

  bool isView = iEvent.getByToken(input_candidateview_token_, inputsHandle);
  if (isView) {
    if (inputsHandle->empty()) {
      output(iEvent, iSetup);
      return;
    }
    for (size_t i = 0; i < inputsHandle->size(); ++i) {
      inputs_.push_back(inputsHandle->ptrAt(i));
    }
  } else {
    bool isPF = iEvent.getByToken(input_candidatefwdptr_token_, pfinputsHandleAsFwdPtr);
    bool isPFFwdPtr = iEvent.getByToken(input_packedcandidatefwdptr_token_, packedinputsHandleAsFwdPtr);
    bool isGen = iEvent.getByToken(input_gencandidatefwdptr_token_, geninputsHandleAsFwdPtr);
    bool isGenFwdPtr = iEvent.getByToken(input_packedgencandidatefwdptr_token_, packedgeninputsHandleAsFwdPtr);

    if (isPF) {
      if (pfinputsHandleAsFwdPtr->empty()) {
        output(iEvent, iSetup);
        return;
      }
      for (size_t i = 0; i < pfinputsHandleAsFwdPtr->size(); ++i) {
        if ((*pfinputsHandleAsFwdPtr)[i].ptr().isAvailable()) {
          inputs_.push_back((*pfinputsHandleAsFwdPtr)[i].ptr());
        } else if ((*pfinputsHandleAsFwdPtr)[i].backPtr().isAvailable()) {
          inputs_.push_back((*pfinputsHandleAsFwdPtr)[i].backPtr());
        }
      }
    } else if (isPFFwdPtr) {
      if (packedinputsHandleAsFwdPtr->empty()) {
        output(iEvent, iSetup);
        return;
      }
      for (size_t i = 0; i < packedinputsHandleAsFwdPtr->size(); ++i) {
        if ((*packedinputsHandleAsFwdPtr)[i].ptr().isAvailable()) {
          inputs_.push_back((*packedinputsHandleAsFwdPtr)[i].ptr());
        } else if ((*packedinputsHandleAsFwdPtr)[i].backPtr().isAvailable()) {
          inputs_.push_back((*packedinputsHandleAsFwdPtr)[i].backPtr());
        }
      }
    } else if (isGen) {
      if (geninputsHandleAsFwdPtr->empty()) {
        output(iEvent, iSetup);
        return;
      }
      for (size_t i = 0; i < geninputsHandleAsFwdPtr->size(); ++i) {
        if ((*geninputsHandleAsFwdPtr)[i].ptr().isAvailable()) {
          inputs_.push_back((*geninputsHandleAsFwdPtr)[i].ptr());
        } else if ((*geninputsHandleAsFwdPtr)[i].backPtr().isAvailable()) {
          inputs_.push_back((*geninputsHandleAsFwdPtr)[i].backPtr());
        }
      }
    } else if (isGenFwdPtr) {
      if (geninputsHandleAsFwdPtr->empty()) {
        output(iEvent, iSetup);
        return;
      }
      for (size_t i = 0; i < packedgeninputsHandleAsFwdPtr->size(); ++i) {
        if ((*packedgeninputsHandleAsFwdPtr)[i].ptr().isAvailable()) {
          inputs_.push_back((*packedgeninputsHandleAsFwdPtr)[i].ptr());
        } else if ((*packedgeninputsHandleAsFwdPtr)[i].backPtr().isAvailable()) {
          inputs_.push_back((*packedgeninputsHandleAsFwdPtr)[i].backPtr());
        }
      }
    } else {
      throw cms::Exception("Invalid Jet Inputs")
          << "Did not specify appropriate inputs for VirtualJetProducer, Abort!\n";
    }
  }
  LogDebug("VirtualJetProducer") << "Got inputs\n";

  // Convert candidates to fastjet::PseudoJets.
  // Also correct to Primary Vertex. Will modify fjInputs_
  // and use inputs_
  fjInputs_.reserve(inputs_.size());
  inputTowers();
  LogDebug("VirtualJetProducer") << "Inputted towers\n";

  // For Pileup subtraction using offset correction:
  // Subtract pedestal.
  if (doPUOffsetCorr_) {
    subtractor_->setDefinition(fjJetDefinition_);
    subtractor_->reset(inputs_, fjInputs_, fjJets_);
    subtractor_->calculatePedestal(fjInputs_);
    subtractor_->subtractPedestal(fjInputs_);
    LogDebug("VirtualJetProducer") << "Subtracted pedestal\n";
  }
  // Run algorithm. Will modify fjJets_ and allocate fjClusterSeq_.
  // This will use fjInputs_
  runAlgorithm(iEvent, iSetup);

  // if ( doPUOffsetCorr_ ) {
  //    subtractor_->setAlgorithm(fjClusterSeq_);
  // }

  LogDebug("VirtualJetProducer") << "Ran algorithm\n";
  // For Pileup subtraction using offset correction:
  // Now we find jets and need to recalculate their energy,
  // mark towers participated in jet,
  // remove occupied towers from the list and recalculate mean and sigma
  // put the initial towers collection to the jet,
  // and subtract from initial towers in jet recalculated mean and sigma of towers
  if (doPUOffsetCorr_) {
    LogDebug("VirtualJetProducer") << "Do PUOffsetCorr\n";
    vector<fastjet::PseudoJet> orphanInput;
    subtractor_->calculateOrphanInput(orphanInput);
    subtractor_->calculatePedestal(orphanInput);
    subtractor_->offsetCorrectJets();
  }
  // Write the output jets.
  // This will (by default) call the member function template
  // "writeJets", but can be overridden.
  // this will use inputs_
  output(iEvent, iSetup);
  LogDebug("VirtualJetProducer") << "Wrote jets\n";

  // Clear the work vectors so that memory is free for other modules.
  // Use the trick of swapping with an empty vector so that the memory
  // is actually given back rather than silently kept.
  decltype(fjInputs_)().swap(fjInputs_);
  decltype(fjJets_)().swap(fjJets_);
  decltype(inputs_)().swap(inputs_);

  return;
}

//______________________________________________________________________________

void VirtualJetProducer::inputTowers() {
  auto inBegin = inputs_.begin(), inEnd = inputs_.end(), i = inBegin;
  for (; i != inEnd; ++i) {
    auto const& input = **i;
    // std::cout << "CaloTowerVI jets " << input->pt() << " " << input->et() << ' '<< input->energy() << ' ' << (isAnomalousTower(input) ? " bad" : " ok") << std::endl;
    if (edm::isNotFinite(input.pt()))
      continue;
    if (input.et() < inputEtMin_)
      continue;
    if (input.energy() < inputEMin_)
      continue;
    if (isAnomalousTower(*i))
      continue;
    // Change by SRR : this is no longer an error nor warning, this can happen with PU mitigation algos.
    // Also switch to something more numerically safe. (VI: 10^-42GeV????)
    if (input.pt() < 100 * std::numeric_limits<double>::epsilon()) {
      continue;
    }
    if (makeCaloJet(jetTypeE) && doPVCorrection_) {
      const CaloTower& tower = dynamic_cast<const CaloTower&>(input);
      auto const& ct = tower.p4(vertex_);  // very expensive as computed in eta/phi
      fjInputs_.emplace_back(ct.px(), ct.py(), ct.pz(), ct.energy());
      fjInputs_.back().set_user_index(i - inBegin);
      //std::cout << "tower:" << *tower << '\n';
    } else {
      /*
      if(makePFJet(jetTypeE)) {
    reco::PFCandidate& pfc = (reco::PFCandidate&)input;
    std::cout << "PF cand:" << pfc << '\n';
      }
      */
      if (!applyWeight_) {
        fjInputs_.emplace_back(input.px(), input.py(), input.pz(), input.energy());
        fjInputs_.back().set_user_index(i - inBegin);
      } else {
        if (input_weights_token_.isUninitialized())
          throw cms::Exception("InvalidInput")
              << "applyWeight set to True, but no weights given in VirtualJetProducer\n";
        float w = weights_[*i];
        if (w > 0) {
          fjInputs_.emplace_back(input.px() * w, input.py() * w, input.pz() * w, input.energy() * w);
          fjInputs_.back().set_user_index(i - inBegin);
        }
      }
    }
  }

  if (restrictInputs_ && fjInputs_.size() > maxInputs_) {
    reco::helper::GreaterByPtPseudoJet pTComparator;
    std::sort(fjInputs_.begin(), fjInputs_.end(), pTComparator);
    fjInputs_.resize(maxInputs_);
    edm::LogWarning("JetRecoTooManyEntries")
        << "Too many inputs in the event, limiting to first " << maxInputs_ << ". Output is suspect.";
  }
}

//______________________________________________________________________________
bool VirtualJetProducer::isAnomalousTower(reco::CandidatePtr input) {
  if (!makeCaloJet(jetTypeE))
    return false;
  else
    return (*anomalousTowerDef_)(*input);
}

//------------------------------------------------------------------------------
// This is pure virtual.
//______________________________________________________________________________
// void VirtualJetProducer::runAlgorithm( edm::Event & iEvent, edm::EventSetup const& iSetup,
//                                        std::vector<edm::Ptr<reco::Candidate> > const & inputs_);

//______________________________________________________________________________
void VirtualJetProducer::copyConstituents(const vector<fastjet::PseudoJet>& fjConstituents, reco::Jet* jet) {
  for (unsigned int i = 0; i < fjConstituents.size(); ++i) {
    int index = fjConstituents[i].user_index();
    if (index >= 0 && static_cast<unsigned int>(index) < inputs_.size())
      jet->addDaughter(inputs_[index]);
  }
}

//______________________________________________________________________________
vector<reco::CandidatePtr> VirtualJetProducer::getConstituents(const vector<fastjet::PseudoJet>& fjConstituents) {
  vector<reco::CandidatePtr> result;
  result.reserve(fjConstituents.size() / 2);
  for (unsigned int i = 0; i < fjConstituents.size(); i++) {
    auto index = fjConstituents[i].user_index();
    if (index >= 0 && static_cast<unsigned int>(index) < inputs_.size()) {
      result.emplace_back(inputs_[index]);
    }
  }
  return result;
}

//_____________________________________________________________________________

void VirtualJetProducer::output(edm::Event& iEvent, edm::EventSetup const& iSetup) {
  // Write jets and constitutents. Will use fjJets_, inputs_
  // and fjClusterSeq_

  if (writeCompound_) {
    // Write jets and subjets
    switch (jetTypeE) {
      case JetType::CaloJet:
        writeCompoundJets<reco::CaloJet>(iEvent, iSetup);
        break;
      case JetType::PFJet:
        writeCompoundJets<reco::PFJet>(iEvent, iSetup);
        break;
      case JetType::GenJet:
        writeCompoundJets<reco::GenJet>(iEvent, iSetup);
        break;
      case JetType::BasicJet:
        writeCompoundJets<reco::BasicJet>(iEvent, iSetup);
        break;
      default:
        throw cms::Exception("InvalidInput") << "invalid jet type in CompoundJetProducer\n";
        break;
    };
  } else if (writeJetsWithConst_) {
    // Write jets and new constituents.
    writeJetsWithConstituents<reco::PFJet>(iEvent, iSetup);
  } else {
    switch (jetTypeE) {
      case JetType::CaloJet:
        writeJets<reco::CaloJet>(iEvent, iSetup);
        break;
      case JetType::PFJet:
        writeJets<reco::PFJet>(iEvent, iSetup);
        break;
      case JetType::GenJet:
        writeJets<reco::GenJet>(iEvent, iSetup);
        break;
      case JetType::TrackJet:
        writeJets<reco::TrackJet>(iEvent, iSetup);
        break;
      case JetType::PFClusterJet:
        writeJets<reco::PFClusterJet>(iEvent, iSetup);
        break;
      case JetType::BasicJet:
        writeJets<reco::BasicJet>(iEvent, iSetup);
        break;
      default:
        throw cms::Exception("InvalidInput") << "invalid jet type in VirtualJetProducer\n";
        break;
    };
  }
}

namespace {
  template <typename T>
  struct Area {
    static float get(T const&) { return 0; }
  };

  template <>
  struct Area<reco::CaloJet> {
    static float get(reco::CaloJet const& jet) { return jet.getSpecific().mTowersArea; }
  };
}  // namespace

template <typename T>
void VirtualJetProducer::writeJets(edm::Event& iEvent, edm::EventSetup const& iSetup) {
  // std::cout << "writeJets " << typeid(T).name()
  //          << (doRhoFastjet_ ? " doRhoFastjet " : "")
  //          << (doAreaFastjet_ ? " doAreaFastjet " : "")
  //          << (doAreaDiskApprox_ ? " doAreaDiskApprox " : "")
  //          << std::endl;

  if (doRhoFastjet_) {
    // declare jet collection without the two jets,
    // for unbiased background estimation.
    std::vector<fastjet::PseudoJet> fjexcluded_jets;
    fjexcluded_jets = fjJets_;

    if (fjexcluded_jets.size() > 2)
      fjexcluded_jets.resize(nExclude_);

    if (doFastJetNonUniform_) {
      auto rhos = std::make_unique<std::vector<double>>();
      auto sigmas = std::make_unique<std::vector<double>>();
      int nEta = puCenters_.size();
      rhos->reserve(nEta);
      sigmas->reserve(nEta);
      fastjet::ClusterSequenceAreaBase const* clusterSequenceWithArea =
          dynamic_cast<fastjet::ClusterSequenceAreaBase const*>(fjClusterSeq_.get());

      if (clusterSequenceWithArea == nullptr) {
        if (!fjJets_.empty()) {
          throw cms::Exception("LogicError") << "fjClusterSeq is not initialized while inputs are present\n ";
        }
      } else {
        for (int ie = 0; ie < nEta; ++ie) {
          double eta = puCenters_[ie];
          double etamin = eta - puWidth_;
          double etamax = eta + puWidth_;
          fastjet::RangeDefinition range_rho(etamin, etamax);
          fastjet::BackgroundEstimator bkgestim(*clusterSequenceWithArea, range_rho);
          bkgestim.set_excluded_jets(fjexcluded_jets);
          rhos->push_back(bkgestim.rho());
          sigmas->push_back(bkgestim.sigma());
        }
      }
      iEvent.put(std::move(rhos), "rhos");
      iEvent.put(std::move(sigmas), "sigmas");
    } else {
      auto rho = std::make_unique<double>(0.0);
      auto sigma = std::make_unique<double>(0.0);
      double mean_area = 0;

      fastjet::ClusterSequenceAreaBase const* clusterSequenceWithArea =
          dynamic_cast<fastjet::ClusterSequenceAreaBase const*>(fjClusterSeq_.get());
      if (clusterSequenceWithArea == nullptr) {
        if (!fjJets_.empty()) {
          throw cms::Exception("LogicError") << "fjClusterSeq is not initialized while inputs are present\n ";
        }
      } else {
        clusterSequenceWithArea->get_median_rho_and_sigma(*fjSelector_, false, *rho, *sigma, mean_area);
        if ((*rho < 0) || (edm::isNotFinite(*rho))) {
          edm::LogError("BadRho") << "rho value is " << *rho << " area:" << mean_area
                                  << " and n_empty_jets: " << clusterSequenceWithArea->n_empty_jets(*fjSelector_)
                                  << " with range " << fjSelector_->description() << ". Setting rho to rezo.";
          *rho = 0;
        }
      }
      iEvent.put(std::move(rho), "rho");
      iEvent.put(std::move(sigma), "sigma");
    }
  }  // doRhoFastjet_

  // produce output jet collection

  using namespace reco;

  // allocate fjJets_.size() Ts in vector
  auto jets = std::make_unique<std::vector<T>>(fjJets_.size());

  if (!fjJets_.empty()) {
    // Distance between jet centers and overlap area -- for disk-based area calculation
    using RIJ = std::pair<double, double>;
    std::vector<RIJ> rijStorage(fjJets_.size() * (fjJets_.size() / 2));
    RIJ* rij[fjJets_.size()];
    unsigned int k = 0;
    for (unsigned int ijet = 0; ijet < fjJets_.size(); ++ijet) {
      rij[ijet] = &rijStorage[k];
      k += ijet;
    }

    float etaJ[fjJets_.size()], phiJ[fjJets_.size()];

    auto orParam_ = 1. / rParam_;
    // fill jets
    [[maybe_unused]] const CaloGeometry* pGeometry = nullptr;
    [[maybe_unused]] const HcalTopology* pTopology = nullptr;
    if constexpr (std::is_same_v<T, reco::CaloJet>) {
      pGeometry = &getGeometry(iSetup);
      pTopology = &getTopology(iSetup);
    }
    for (unsigned int ijet = 0; ijet < fjJets_.size(); ++ijet) {
      auto& jet = (*jets)[ijet];

      // get the fastjet jet
      const fastjet::PseudoJet& fjJet = fjJets_[ijet];
      // get the constituents from fastjet
      std::vector<fastjet::PseudoJet> const& fjConstituents = fastjet::sorted_by_pt(fjJet.constituents());
      // convert them to CandidatePtr vector
      std::vector<CandidatePtr> const& constituents = getConstituents(fjConstituents);

      // write the specifics to the jet (simultaneously sets 4-vector, vertex).
      // These are overridden functions that will call the appropriate
      // specific allocator.
      if ((applyWeight_) && (makePFJet(jetTypeE)))
        writeSpecific(dynamic_cast<reco::PFJet&>(jet),
                      Particle::LorentzVector(fjJet.px(), fjJet.py(), fjJet.pz(), fjJet.E()),
                      vertex_,
                      constituents,
                      &weights_);
      else {
        if constexpr (std::is_same_v<T, reco::CaloJet>) {
          writeSpecific(jet,
                        Particle::LorentzVector(fjJet.px(), fjJet.py(), fjJet.pz(), fjJet.E()),
                        vertex_,
                        constituents,
                        *pGeometry,
                        *pTopology);
        } else {
          writeSpecific(
              jet, Particle::LorentzVector(fjJet.px(), fjJet.py(), fjJet.pz(), fjJet.E()), vertex_, constituents);
        }
      }
      phiJ[ijet] = jet.phi();
      etaJ[ijet] = jet.eta();
      jet.setIsWeighted(applyWeight_);
    }

    // calcuate the jet area
    for (unsigned int ijet = 0; ijet < fjJets_.size(); ++ijet) {
      // calcuate the jet area
      double jetArea = 0.0;
      // get the fastjet jet
      const auto& fjJet = fjJets_[ijet];
      if (doAreaFastjet_ && fjJet.has_area()) {
        jetArea = fjJet.area();
      } else if (doAreaDiskApprox_) {
        // Here it is assumed that fjJets_ is in decreasing order of pT,
        // which should happen in FastjetJetProducer::runAlgorithm()
        jetArea = M_PI;
        RIJ* distance = rij[ijet];
        for (unsigned jJet = 0; jJet < ijet; ++jJet) {
          distance[jJet].first = std::sqrt(reco::deltaR2(etaJ[ijet], phiJ[ijet], etaJ[jJet], phiJ[jJet])) * orParam_;
          distance[jJet].second = reco::helper::VirtualJetProducerHelper::intersection(distance[jJet].first);
          jetArea -= distance[jJet].second;
          for (unsigned kJet = 0; kJet < jJet; ++kJet) {
            jetArea += reco::helper::VirtualJetProducerHelper::intersection(distance[jJet].first,
                                                                            distance[kJet].first,
                                                                            rij[jJet][kJet].first,
                                                                            distance[jJet].second,
                                                                            distance[kJet].second,
                                                                            rij[jJet][kJet].second);
          }  // end loop over harder jets
        }    // end loop over harder jets
        jetArea *= (rParam_ * rParam_);
      }
      auto& jet = (*jets)[ijet];
      jet.setJetArea(jetArea);

      if (doPUOffsetCorr_) {
        jet.setPileup(subtractor_->getPileUpEnergy(ijet));
      } else {
        jet.setPileup(0.0);
      }

      // std::cout << "area " << ijet << " " << jetArea << " " << Area<T>::get(jet) << std::endl;
      // std::cout << "JetVI " << ijet << ' '<< jet.pt() << " " << jet.et() << ' '<< jet.energy() << ' '<< jet.mass() << std::endl;
    }
  }
  // put the jets in the collection
  iEvent.put(std::move(jets), jetCollInstanceName_);
}

template <class T>
void VirtualJetProducer::writeCompoundJets(edm::Event& iEvent, edm::EventSetup const& iSetup) {
  if (verbosity_ >= 1) {
    std::cout << "<VirtualJetProducer::writeCompoundJets (moduleLabel = " << moduleLabel_ << ")>:" << std::endl;
  }

  // get a list of output jets
  auto jetCollection = std::make_unique<reco::BasicJetCollection>();
  // get a list of output subjets
  auto subjetCollection = std::make_unique<std::vector<T>>();

  // This will store the handle for the subjets after we write them
  edm::OrphanHandle<std::vector<T>> subjetHandleAfterPut;
  // this is the mapping of subjet to hard jet
  std::vector<std::vector<int>> indices;
  // this is the list of hardjet 4-momenta
  std::vector<math::XYZTLorentzVector> p4_hardJets;
  // this is the hardjet areas
  std::vector<double> area_hardJets;

  // Loop over the hard jets
  std::vector<fastjet::PseudoJet>::const_iterator it = fjJets_.begin(), iEnd = fjJets_.end(), iBegin = fjJets_.begin();
  indices.resize(fjJets_.size());
  for (; it != iEnd; ++it) {
    fastjet::PseudoJet const& localJet = *it;
    unsigned int jetIndex = it - iBegin;
    // Get the 4-vector for the hard jet
    p4_hardJets.push_back(math::XYZTLorentzVector(localJet.px(), localJet.py(), localJet.pz(), localJet.e()));
    double localJetArea = 0.0;
    if (doAreaFastjet_ && localJet.has_area()) {
      localJetArea = localJet.area();
    }
    area_hardJets.push_back(localJetArea);

    // create the subjet list
    std::vector<fastjet::PseudoJet> constituents;
    if (it->has_pieces()) {
      constituents = it->pieces();
    } else if (it->has_constituents()) {
      constituents = it->constituents();
    }

    std::vector<fastjet::PseudoJet>::const_iterator itSubJetBegin = constituents.begin(), itSubJet = itSubJetBegin,
                                                    itSubJetEnd = constituents.end();
    for (; itSubJet != itSubJetEnd; ++itSubJet) {
      fastjet::PseudoJet const& subjet = *itSubJet;
      if (verbosity_ >= 1) {
        std::cout << "subjet #" << (itSubJet - itSubJetBegin) << ": Pt = " << subjet.pt() << ", eta = " << subjet.eta()
                  << ", phi = " << subjet.phi() << ", mass = " << subjet.m()
                  << " (#constituents = " << subjet.constituents().size() << ")" << std::endl;
        std::vector<fastjet::PseudoJet> subjet_constituents = subjet.constituents();
        int idx_constituent = 0;
        for (std::vector<fastjet::PseudoJet>::const_iterator constituent = subjet_constituents.begin();
             constituent != subjet_constituents.end();
             ++constituent) {
          if (constituent->pt() < 1.e-3)
            continue;  // CV: skip ghosts
          std::cout << "  constituent #" << idx_constituent << ": Pt = " << constituent->pt()
                    << ", eta = " << constituent->eta() << ", phi = " << constituent->phi() << ","
                    << " mass = " << constituent->m() << std::endl;
          ++idx_constituent;
        }
      }

      if (verbosity_ >= 1) {
        std::cout << "subjet #" << (itSubJet - itSubJetBegin) << ": Pt = " << subjet.pt() << ", eta = " << subjet.eta()
                  << ", phi = " << subjet.phi() << ", mass = " << subjet.m()
                  << " (#constituents = " << subjet.constituents().size() << ")" << std::endl;
        std::vector<fastjet::PseudoJet> subjet_constituents = subjet.constituents();
        int idx_constituent = 0;
        for (std::vector<fastjet::PseudoJet>::const_iterator constituent = subjet_constituents.begin();
             constituent != subjet_constituents.end();
             ++constituent) {
          if (constituent->pt() < 1.e-3)
            continue;  // CV: skip ghosts
          std::cout << " constituent #" << idx_constituent << ": Pt = " << constituent->pt()
                    << ", eta = " << constituent->eta() << ", phi = " << constituent->phi() << ","
                    << " mass = " << constituent->m() << std::endl;
          ++idx_constituent;
        }
      }

      math::XYZTLorentzVector p4Subjet(subjet.px(), subjet.py(), subjet.pz(), subjet.e());
      reco::Particle::Point point(0, 0, 0);

      // This will hold ptr's to the subjets
      std::vector<reco::CandidatePtr> subjetConstituents;

      // Get the transient subjet constituents from fastjet
      std::vector<fastjet::PseudoJet> subjetFastjetConstituents = subjet.constituents();
      std::vector<reco::CandidatePtr> constituents = getConstituents(subjetFastjetConstituents);

      indices[jetIndex].push_back(subjetCollection->size());

      // Add the concrete subjet type to the subjet list to write to event record
      subjetCollection->push_back(*std::make_unique<T>());
      auto& jet = subjetCollection->back();
      if ((applyWeight_) && (makePFJet(jetTypeE)))
        reco::writeSpecific(dynamic_cast<reco::PFJet&>(jet), p4Subjet, point, constituents, &weights_);
      else if constexpr (std::is_same_v<T, reco::CaloJet>) {
        reco::writeSpecific(
            jet, p4Subjet, point, constituents, iSetup.getData(geometry_token_), iSetup.getData(topology_token_));
      } else {
        reco::writeSpecific(jet, p4Subjet, point, constituents);
      }
      jet.setIsWeighted(applyWeight_);
      double subjetArea = 0.0;
      if (doAreaFastjet_ && itSubJet->has_area()) {
        subjetArea = itSubJet->area();
      }
      jet.setJetArea(subjetArea);
    }
  }

  // put subjets into event record
  subjetHandleAfterPut = iEvent.put(std::move(subjetCollection), jetCollInstanceName_);

  // Now create the hard jets with ptr's to the subjets as constituents
  std::vector<math::XYZTLorentzVector>::const_iterator ip4 = p4_hardJets.begin(), ip4Begin = p4_hardJets.begin(),
                                                       ip4End = p4_hardJets.end();

  for (; ip4 != ip4End; ++ip4) {
    int p4_index = ip4 - ip4Begin;
    std::vector<int>& ind = indices[p4_index];
    std::vector<reco::CandidatePtr> i_hardJetConstituents;
    // Add the subjets to the hard jet
    for (std::vector<int>::const_iterator isub = ind.begin(); isub != ind.end(); ++isub) {
      reco::CandidatePtr candPtr(subjetHandleAfterPut, *isub, false);
      i_hardJetConstituents.push_back(candPtr);
    }
    reco::Particle::Point point(0, 0, 0);
    reco::BasicJet toput(*ip4, point, i_hardJetConstituents);
    toput.setJetArea(area_hardJets[ip4 - ip4Begin]);
    jetCollection->push_back(toput);
  }

  // put hard jets into event record
  // Store the Orphan handle for adding HTT information
  edm::OrphanHandle<reco::BasicJetCollection> oh = iEvent.put(std::move(jetCollection));

  if (fromHTTTopJetProducer_) {
    addHTTTopJetTagInfoCollection(iEvent, iSetup, oh);
  }
}

template <class T>
void VirtualJetProducer::writeJetsWithConstituents(edm::Event& iEvent, edm::EventSetup const& iSetup) {
  if (verbosity_ >= 1) {
    std::cout << "<VirtualJetProducer::writeJetsWithConstituents (moduleLabel = " << moduleLabel_ << ")>:" << std::endl;
  }

  // get a list of output jets  MV: make this compatible with template
  auto jetCollection = std::make_unique<reco::PFJetCollection>();

  // this is the mapping of jet to constituents
  std::vector<std::vector<int>> indices;
  // this is the list of jet 4-momenta
  std::vector<math::XYZTLorentzVector> p4_Jets;
  // this is the jet areas
  std::vector<double> area_Jets;

  // get a list of output constituents
  auto constituentCollection = std::make_unique<reco::PFCandidateCollection>();

  // This will store the handle for the constituents after we write them
  edm::OrphanHandle<reco::PFCandidateCollection> constituentHandleAfterPut;

  // Loop over the jets and extract constituents
  std::vector<fastjet::PseudoJet> constituentsSub;
  std::vector<fastjet::PseudoJet>::const_iterator it = fjJets_.begin(), iEnd = fjJets_.end(), iBegin = fjJets_.begin();
  indices.resize(fjJets_.size());

  for (; it != iEnd; ++it) {
    fastjet::PseudoJet const& localJet = *it;
    unsigned int jetIndex = it - iBegin;
    // Get the 4-vector for the hard jet
    p4_Jets.push_back(math::XYZTLorentzVector(localJet.px(), localJet.py(), localJet.pz(), localJet.e()));
    double localJetArea = 0.0;
    if (doAreaFastjet_ && localJet.has_area()) {
      localJetArea = localJet.area();
    }
    area_Jets.push_back(localJetArea);

    // create the constituent list
    std::vector<fastjet::PseudoJet> constituents, ghosts;
    if (it->has_pieces())
      constituents = it->pieces();
    else if (it->has_constituents())
      fastjet::SelectorIsPureGhost().sift(it->constituents(), ghosts, constituents);  //filter out ghosts

    //loop over constituents of jet (can be subjets or normal constituents)
    indices[jetIndex].reserve(constituents.size());
    constituentsSub.reserve(constituentsSub.size() + constituents.size());
    for (fastjet::PseudoJet const& constit : constituents) {
      indices[jetIndex].push_back(constituentsSub.size());
      constituentsSub.push_back(constit);
    }
  }

  //Loop over constituents and store in the event
  static const reco::PFCandidate dummySinceTranslateIsNotStatic;
  for (fastjet::PseudoJet const& constit : constituentsSub) {
    auto orig = inputs_[constit.user_index()];
    auto id = dummySinceTranslateIsNotStatic.translatePdgIdToType(orig->pdgId());
    reco::PFCandidate pCand(reco::PFCandidate(orig->charge(), orig->p4(), id));
    math::XYZTLorentzVector pVec;
    pVec.SetPxPyPzE(constit.px(), constit.py(), constit.pz(), constit.e());
    pCand.setP4(pVec);
    pCand.setSourceCandidatePtr(orig->sourceCandidatePtr(0));
    constituentCollection->push_back(pCand);
  }
  // put constituents into event record
  constituentHandleAfterPut = iEvent.put(std::move(constituentCollection), jetCollInstanceName_);

  // Now create the jets with ptr's to the constituents
  std::vector<math::XYZTLorentzVector>::const_iterator ip4 = p4_Jets.begin(), ip4Begin = p4_Jets.begin(),
                                                       ip4End = p4_Jets.end();

  for (; ip4 != ip4End; ++ip4) {
    int p4_index = ip4 - ip4Begin;
    std::vector<int>& ind = indices[p4_index];
    std::vector<reco::CandidatePtr> i_jetConstituents;
    // Add the constituents to the jet
    for (std::vector<int>::const_iterator iconst = ind.begin(); iconst != ind.end(); ++iconst) {
      reco::CandidatePtr candPtr(constituentHandleAfterPut, *iconst, false);
      i_jetConstituents.push_back(candPtr);
    }
    if (!i_jetConstituents.empty()) {  //only keep jets which have constituents after subtraction
      reco::Particle::Point point(0, 0, 0);
      reco::PFJet jet;
      reco::writeSpecific(jet, *ip4, point, i_jetConstituents);
      jet.setJetArea(area_Jets[ip4 - ip4Begin]);
      jetCollection->emplace_back(jet);
    }
  }

  // put jets into event record
  iEvent.put(std::move(jetCollection));
}

CaloGeometry const& VirtualJetProducer::getGeometry(edm::EventSetup const& iSetup) const {
  return iSetup.getData(geometry_token_);
}

HcalTopology const& VirtualJetProducer::getTopology(edm::EventSetup const& iSetup) const {
  return iSetup.getData(topology_token_);
}

// ------------ method fills 'descriptions' with the allowed parameters for the module  ------------
void VirtualJetProducer::fillDescriptions(edm::ConfigurationDescriptions& descriptions) {
  edm::ParameterSetDescription desc;
  fillDescriptionsFromVirtualJetProducer(desc);
  desc.add<string>("jetCollInstanceName", "");

  // addDefault must be used here instead of add unless
  // all the classes that inherit from this class redefine
  // the fillDescriptions function. Otherwise, the autogenerated
  // cfi filenames are the same and conflict.
  descriptions.addDefault(desc);
}

void VirtualJetProducer::fillDescriptionsFromVirtualJetProducer(edm::ParameterSetDescription& desc) {
  desc.add<edm::InputTag>("src", edm::InputTag("particleFlow"));
  desc.add<edm::InputTag>("srcPVs", edm::InputTag(""));
  desc.add<string>("jetType", "PFJet");
  desc.add<string>("jetAlgorithm", "AntiKt");
  desc.add<double>("rParam", 0.4);
  desc.add<double>("inputEtMin", 0.0);
  desc.add<double>("inputEMin", 0.0);
  desc.add<double>("jetPtMin", 5.);
  desc.add<bool>("doPVCorrection", false);
  desc.add<bool>("doAreaFastjet", false);
  desc.add<bool>("doRhoFastjet", false);
  desc.add<bool>("doPUOffsetCorr", false);
  desc.add<double>("puPtMin", 10.);
  desc.add<double>("nSigmaPU", 1.0);
  desc.add<double>("radiusPU", 0.5);
  desc.add<string>("subtractorName", "");
  desc.add<bool>("useExplicitGhosts", false);
  desc.add<bool>("doAreaDiskApprox", false);
  desc.add<double>("voronoiRfact", -0.9);
  desc.add<double>("Rho_EtaMax", 4.4);
  desc.add<double>("Ghost_EtaMax", 5.);
  desc.add<int>("Active_Area_Repeats", 1);
  desc.add<double>("GhostArea", 0.01);
  desc.add<bool>("restrictInputs", false);
  desc.add<unsigned int>("maxInputs", 1);
  desc.add<bool>("writeCompound", false);
  desc.add<bool>("writeJetsWithConst", false);
  desc.add<bool>("doFastJetNonUniform", false);
  desc.add<bool>("useDeterministicSeed", false);
  desc.add<unsigned int>("minSeed", 14327);
  desc.add<int>("verbosity", 0);
  desc.add<double>("puWidth", 0.);
  desc.add<unsigned int>("nExclude", 0);
  desc.add<unsigned int>("maxBadEcalCells", 9999999);
  desc.add<unsigned int>("maxBadHcalCells", 9999999);
  desc.add<unsigned int>("maxProblematicEcalCells", 9999999);
  desc.add<unsigned int>("maxProblematicHcalCells", 9999999);
  desc.add<unsigned int>("maxRecoveredEcalCells", 9999999);
  desc.add<unsigned int>("maxRecoveredHcalCells", 9999999);
  vector<double> puCentersDefault;
  desc.add<vector<double>>("puCenters", puCentersDefault);
  desc.add<bool>("applyWeight", false);
  desc.add<edm::InputTag>("srcWeights", edm::InputTag(""));
  desc.add<double>("minimumTowersFraction", 0.);
}