TopDecaySubset Class Reference

Module to produce the subset of generator particles directly contained in top decay chains. More...

Inheritance diagram for TopDecaySubset:

Public Types
enum	FillMode { kStable, kME }
enum	RunMode { kRun1, kRun2 }
	supported modes to run the code More...
enum	ShowerModel {   kStart = -1, kNone, kPythia, kHerwig,   kPythia8, kSherpa }
	classification of potential shower types More...
Public Types inherited from edm::stream::EDProducer<>
using	CacheTypes = CacheContexts< T... >
using	GlobalCache = typename CacheTypes::GlobalCache
using	HasAbility = AbilityChecker< T... >
using	InputProcessBlockCache = typename CacheTypes::InputProcessBlockCache
using	LuminosityBlockCache = typename CacheTypes::LuminosityBlockCache
using	LuminosityBlockContext = LuminosityBlockContextT< LuminosityBlockCache, RunCache, GlobalCache >
using	LuminosityBlockSummaryCache = typename CacheTypes::LuminosityBlockSummaryCache
using	RunCache = typename CacheTypes::RunCache
using	RunContext = RunContextT< RunCache, GlobalCache >
using	RunSummaryCache = typename CacheTypes::RunSummaryCache

Public Member Functions
void	produce (edm::Event &event, const edm::EventSetup &setup) override
	write output into the event More...
	TopDecaySubset (const edm::ParameterSet &cfg)
	default constructor More...
Public Member Functions inherited from edm::stream::EDProducer<>
	EDProducer ()=default
	EDProducer (const EDProducer &)=delete
bool	hasAbilityToProduceInBeginLumis () const final
bool	hasAbilityToProduceInBeginProcessBlocks () const final
bool	hasAbilityToProduceInBeginRuns () const final
bool	hasAbilityToProduceInEndLumis () const final
bool	hasAbilityToProduceInEndProcessBlocks () const final
bool	hasAbilityToProduceInEndRuns () const final
const EDProducer &	operator= (const EDProducer &)=delete

Private Member Functions
void	addDaughters (int &idx, const reco::GenParticle::const_iterator part, reco::GenParticleCollection &target, bool recursive=true)
	recursively fill vector for all further decay particles of a given particle More...
void	addRadiation (int &idx, const reco::GenParticle::const_iterator part, reco::GenParticleCollection &target)
	fill vector including all radiations from quarks originating from W/top More...
void	addRadiation (int &idx, const reco::GenParticle *part, reco::GenParticleCollection &target)
ShowerModel	checkShowerModel (const std::vector< const reco::GenParticle *> &tops) const
	check the decay chain for the used shower model More...
ShowerModel	checkShowerModel (edm::Event &event)
	check the embedded MC information for the shower model More...
void	checkWBosons (std::vector< const reco::GenParticle *> &tops) const
	check whether W bosons are contained in the original gen particle listing More...
void	clearReferences ()
	clear references More...
void	fillListing (const std::vector< const reco::GenParticle *> &tops, reco::GenParticleCollection &target)
	fill output vector for full decay chain More...
void	fillListing (const std::vector< const reco::GenParticle *> &primalTops, const std::vector< const reco::GenParticle *> &decayingTops, reco::GenParticleCollection &target)
	fill output vector for full decay chain More...
void	fillReferences (const reco::GenParticleRefProd &refProd, reco::GenParticleCollection &target)
	fill references for output vector More...
std::vector< const reco::GenParticle * >	findDecayingTops (const reco::GenParticleCollection &parts)
const reco::GenParticle *	findLastParticleInChain (const reco::GenParticle *p)
std::vector< const reco::GenParticle * >	findPrimalTops (const reco::GenParticleCollection &parts)
const reco::GenParticle *	findPrimalW (const reco::GenParticle *top)
std::vector< const reco::GenParticle * >	findTops (const reco::GenParticleCollection &parts)
	find top quarks in list of input particles More...
reco::Particle::LorentzVector	p4 (const std::vector< const reco::GenParticle *>::const_iterator top, int statusFlag)
	calculate lorentz vector from input (dedicated to top reconstruction) More...
reco::Particle::LorentzVector	p4 (const reco::GenParticle::const_iterator part, int statusFlag)
	calculate lorentz vector from input More...

Private Attributes
bool	addRadiation_
	add radiation or not? More...
FillMode	fillMode_
edm::EDGetTokenT< GenEventInfoProduct >	genEventInfo_srcToken_
	input tag for the genEventInfo source More...
int	motherPartIdx_
std::map< int, std::vector< int > >	refs_
	management of daughter indices for fillRefs More...
RunMode	runMode_
	run mode (Run1 || Run2) More...
ShowerModel	showerModel_
	parton shower mode (filled in checkShowerModel) More...
edm::EDGetTokenT< reco::GenParticleCollection >	srcToken_
	input tag for the genParticle source More...

Detailed Description

Module to produce the subset of generator particles directly contained in top decay chains.

The module produces the subset of generator particles directly contained in top decay chains. The particles are saved as a collection of reco::GenParticles. Depending on the configuration of the module, the 4-vector kinematics can be taken from the status-3 particles (ME before parton showering) or from the status-2 particles (after parton showering), additionally radiated gluons may be considered during the creation of the subset or not.

Definition at line 32 of file TopDecaySubset.cc.

Member Enumeration Documentation

FillMode

enum TopDecaySubset::FillMode

supported modes to fill the new vectors of gen particles

Enumerator
kStable
kME

Definition at line 36 of file TopDecaySubset.cc.

{ kStable, kME };

RunMode

enum TopDecaySubset::RunMode

supported modes to run the code

Enumerator
kRun1
kRun2

Definition at line 40 of file TopDecaySubset.cc.

{ kRun1, kRun2 };

ShowerModel

enum TopDecaySubset::ShowerModel

classification of potential shower types

Enumerator
kStart
kNone
kPythia
kHerwig
kPythia8
kSherpa

Definition at line 38 of file TopDecaySubset.cc.

{ kStart = -1, kNone, kPythia, kHerwig, kPythia8, kSherpa };

Constructor & Destructor Documentation

TopDecaySubset()

TopDecaySubset::TopDecaySubset ( const edm::ParameterSet &  cfg )

explicit

default constructor

Definition at line 120 of file TopDecaySubset.cc.

References looper::cfg, Exception, fillMode_, kME, kRun1, kRun2, kStable, ALCARECOPromptCalibProdSiPixelAli0T_cff::mode, runMode_, and AlCaHLTBitMon_QueryRunRegistry::string.

    : srcToken_(consumes<reco::GenParticleCollection>(cfg.getParameter<edm::InputTag>("src"))),
      genEventInfo_srcToken_(mayConsume<GenEventInfoProduct>(edm::InputTag("generator"))),
      addRadiation_(cfg.getParameter<bool>("addRadiation")),
      showerModel_(kStart),
      runMode_(kRun1) {
  // mapping of the corresponding fillMode; see FillMode
  // enumerator of TopDecaySubset for available modes
  std::string mode = cfg.getParameter<std::string>("fillMode");
  if (mode == "kME")
    fillMode_ = kME;
  else if (mode == "kStable")
    fillMode_ = kStable;
  else
    throw cms::Exception("Configuration") << mode << " is not a supported FillMode!\n";

  mode = cfg.getParameter<std::string>("runMode");
  if (mode == "Run1")
    runMode_ = kRun1;
  else if (mode == "Run2")
    runMode_ = kRun2;
  else
    throw cms::Exception("Configuration") << mode << " is not a supported RunMode!\n";

  // produces a set of GenParticles following
  // the decay branch of top quarks to the first level of
  // stable decay products
  produces<reco::GenParticleCollection>();
}

Member Function Documentation

addDaughters()

void TopDecaySubset::addDaughters ( int &  idx, const reco::GenParticle::const_iterator  part, reco::GenParticleCollection &  target, bool  recursive = true  )

private

recursively fill vector for all further decay particles of a given particle

Definition at line 743 of file TopDecaySubset.cc.

References reco::Candidate::begin(), BPhysicsValidation_cfi::daughters, reco::Candidate::end(), heavyIonCSV_trainingSettings::idx, refs_, and filterCSVwithJSON::target.

Referenced by fillListing().

                                                  {
  std::vector<int> daughters;
  int idxBuffer = idx;
  for (reco::GenParticle::const_iterator daughter = part->begin(); daughter != part->end(); ++daughter) {
    std::unique_ptr<reco::GenParticle> ptr(new reco::GenParticle(
        daughter->threeCharge(), daughter->p4(), daughter->vertex(), daughter->pdgId(), daughter->status(), false));
    target.push_back(*ptr);
    // increment & push index of daughter
    daughters.push_back(++idx);
    // continue recursively if desired
    if (recursive) {
      addDaughters(idx, daughter, target);
    }
  }
  if (!daughters.empty()) {
    refs_[idxBuffer] = daughters;
  }
}

addRadiation() [1/2]

void TopDecaySubset::addRadiation ( int &  idx, const reco::GenParticle::const_iterator  part, reco::GenParticleCollection &  target  )

private

fill vector including all radiations from quarks originating from W/top

Definition at line 703 of file TopDecaySubset.cc.

References reco::Candidate::begin(), BPhysicsValidation_cfi::daughters, reco::Candidate::end(), heavyIonCSV_trainingSettings::idx, refs_, TopDecayID::stable, and filterCSVwithJSON::target.

Referenced by fillListing().

                                                                     {
  std::vector<int> daughters;
  int idxBuffer = idx;
  for (reco::GenParticle::const_iterator daughter = part->begin(); daughter != part->end(); ++daughter) {
    if (daughter->status() <= TopDecayID::stable && daughter->pdgId() != part->pdgId()) {
      // skip comment lines and make sure that
      // the particle is not double counted as
      // daughter of itself
      std::unique_ptr<reco::GenParticle> ptr(new reco::GenParticle(
          daughter->threeCharge(), daughter->p4(), daughter->vertex(), daughter->pdgId(), daughter->status(), false));
      target.push_back(*ptr);
      daughters.push_back(++idx);  //push index of daughter
    }
  }
  if (!daughters.empty()) {
    refs_[idxBuffer] = daughters;
  }
}

addRadiation() [2/2]

void TopDecaySubset::addRadiation ( int &  idx, const reco::GenParticle *  part, reco::GenParticleCollection &  target  )

private

Definition at line 724 of file TopDecaySubset.cc.

References reco::Candidate::begin(), BPhysicsValidation_cfi::daughters, reco::Candidate::end(), heavyIonCSV_trainingSettings::idx, refs_, and filterCSVwithJSON::target.

                                                                                                          {
  std::vector<int> daughters;
  int idxBuffer = idx;
  for (reco::GenParticle::const_iterator daughter = part->begin(); daughter != part->end(); ++daughter) {
    // either pick daughters as long as they are different
    // to the initial particle
    if (daughter->pdgId() != part->pdgId()) {
      std::unique_ptr<reco::GenParticle> ptr(new reco::GenParticle(
          daughter->threeCharge(), daughter->p4(), daughter->vertex(), daughter->pdgId(), daughter->status(), false));
      target.push_back(*ptr);
      daughters.push_back(++idx);  //push index of daughter
    }
  }
  if (!daughters.empty()) {
    refs_[idxBuffer] = daughters;
  }
}

checkShowerModel() [1/2]

TopDecaySubset::ShowerModel TopDecaySubset::checkShowerModel ( const std::vector< const reco::GenParticle *> &  tops ) const

private

check the decay chain for the used shower model

check the decay chain for the exploited shower model

Definition at line 309 of file TopDecaySubset.cc.

References funct::abs(), reco::Candidate::begin(), reco::Candidate::end(), Exception, kHerwig, kNone, kPythia, edm::errors::LogicError, reco::CompositeRefCandidateT< D >::numberOfDaughters(), reco::Candidate::numberOfDaughters(), reco::Candidate::pdgId(), reco::LeafCandidate::pdgId(), TopDecayID::stable, reco::Candidate::status(), TopDecayID::tID, and TopDecayID::WID.

Referenced by produce().

                                                                                                              {
  for (std::vector<const reco::GenParticle*>::const_iterator it = tops.begin(); it != tops.end(); ++it) {
    const reco::GenParticle* top = *it;
    // check for kHerwig type showers: here the status 3 top quark will
    // have a single status 2 top quark as daughter, which has again 3
    // or more status 2 daughters
    if (top->numberOfDaughters() == 1) {
      if (top->begin()->pdgId() == top->pdgId() && top->begin()->status() == TopDecayID::stable &&
          top->begin()->numberOfDaughters() > 1)
        return kHerwig;
    }
    // check for kPythia type showers: here the status 3 top quark will
    // have all decay products and a status 2 top quark as daughters
    // the status 2 top quark will be w/o further daughters
    if (top->numberOfDaughters() > 1) {
      bool containsWBoson = false, containsQuarkDaughter = false;
      for (reco::GenParticle::const_iterator td = top->begin(); td != top->end(); ++td) {
        if (std::abs(td->pdgId()) < TopDecayID::tID)
          containsQuarkDaughter = true;
        if (std::abs(td->pdgId()) == TopDecayID::WID)
          containsWBoson = true;
      }
      if (containsQuarkDaughter && containsWBoson)
        return kPythia;
    }
  }
  // if neither Herwig nor Pythia like
  if (tops.empty())
    edm::LogInfo("decayChain") << " Failed to find top quarks in decay chain. Will assume that this a \n"
                               << " non-top sample and produce an empty decaySubset.\n";
  else
    throw edm::Exception(edm::errors::LogicError,
                         " Can not find back any of the supported hadronization models. Models \n"
                         " which are supported are:                                            \n"
                         " Pythia  LO(+PS): Top(status 3) --> WBoson(status 3), Quark(status 3)\n"
                         " Herwig NLO(+PS): Top(status 2) --> Top(status 3) --> Top(status 2)  \n");
  return kNone;
}

checkShowerModel() [2/2]

TopDecaySubset::ShowerModel TopDecaySubset::checkShowerModel ( edm::Event &  event )

private

check the embedded MC information for the shower model

Definition at line 349 of file TopDecaySubset.cc.

References genEventInfo_srcToken_, edm::HandleBase::id(), edm::HandleBase::isValid(), kHerwig, kNone, kPythia, kPythia8, kSherpa, kStart, edm::moduleName(), EcalCalibMonitorClient_cfi::moduleName, edm::parameterSet(), and AlCaHLTBitMon_QueryRunRegistry::string.

                                                                          {
  edm::Handle<GenEventInfoProduct> genEvtInfoProduct;
  event.getByToken(genEventInfo_srcToken_, genEvtInfoProduct);

  std::string moduleName = "";
  if (genEvtInfoProduct.isValid()) {
    const edm::StableProvenance& prov = event.getStableProvenance(genEvtInfoProduct.id());
    moduleName = edm::moduleName(prov, event.processHistory());
    if (moduleName == "ExternalGeneratorFilter") {
      moduleName = edm::parameterSet(prov, event.processHistory()).getParameter<std::string>("@external_type");
      edm::LogInfo("SpecialModule") << "GEN events are produced by ExternalGeneratorFilter, "
                                    << "which is a wrapper of the original module: " << moduleName;
    }
  }

  ShowerModel shower(kStart);
  if (moduleName.find("Pythia6") != std::string::npos)
    shower = kPythia;
  else if (moduleName.find("Pythia8") != std::string::npos)
    shower = kPythia8;
  else if (moduleName.find("Herwig6") != std::string::npos)
    shower = kHerwig;
  else if (moduleName.find("ThePEG") != std::string::npos)
    // Herwig++
    shower = kHerwig;
  else if (moduleName.find("Sherpa") != std::string::npos)
    shower = kSherpa;
  else
    shower = kNone;
  return shower;
}

checkWBosons()

void TopDecaySubset::checkWBosons ( std::vector< const reco::GenParticle *> &  tops ) const

private

check whether W bosons are contained in the original gen particle listing

check whether the W boson is contained in the original gen particle listing

Definition at line 381 of file TopDecaySubset.cc.

References funct::abs(), reco::Candidate::begin(), reco::Candidate::end(), kPythia, edm::errors::LogicError, showerModel_, TopDecayID::stable, TopDecayID::unfrag, and TopDecayID::WID.

Referenced by produce().

                                                                               {
  unsigned nTops = tops.size();
  for (std::vector<const reco::GenParticle*>::iterator it = tops.begin(); it != tops.end();) {
    const reco::GenParticle* top = *it;
    bool isContained = false;
    bool expectedStatus = false;
    if (showerModel_ != kPythia && top->begin() == top->end())
      throw edm::Exception(edm::errors::LogicError, "showerModel_!=kPythia && top->begin()==top->end()\n");
    for (reco::GenParticle::const_iterator td = ((showerModel_ == kPythia) ? top->begin() : top->begin()->begin());
         td != ((showerModel_ == kPythia) ? top->end() : top->begin()->end());
         ++td) {
      if (std::abs(td->pdgId()) == TopDecayID::WID) {
        isContained = true;
        if (((showerModel_ == kPythia) ? td->status() == TopDecayID::unfrag : td->status() == TopDecayID::stable)) {
          expectedStatus = true;
          break;
        }
      }
    }
    if (!expectedStatus) {
      it = tops.erase(it);
      if (isContained)
        edm::LogInfo("decayChain") << " W boson does not have the expected status. This happens, e.g.,      \n"
                                   << " with MC@NLO in the case of additional ttbar pairs from radiated     \n"
                                   << " gluons. We hope everything is fine, remove the correspdonding top   \n"
                                   << " quark from our list since it is not part of the primary ttbar pair  \n"
                                   << " and try to continue.                                                \n";
    } else
      it++;
  }
  if (tops.empty() && nTops != 0)
    throw edm::Exception(edm::errors::LogicError,
                         " Did not find a W boson with appropriate status for any of the top   \n"
                         " quarks in this event. This means that the hadronization of the W    \n"
                         " boson might be screwed up or there is another problem with the      \n"
                         " particle listing in this MC sample. Please contact an expert.       \n");
}

clearReferences()

void TopDecaySubset::clearReferences ( )

private

clear references

Definition at line 766 of file TopDecaySubset.cc.

References motherPartIdx_, and refs_.

Referenced by produce().

                                     {
  // clear vector of references
  refs_.clear();
  // set idx for mother particles to a start value
  // of -1 (the first entry will raise it to 0)
  motherPartIdx_ = -1;
}

fillListing() [1/2]

void TopDecaySubset::fillListing ( const std::vector< const reco::GenParticle *> &  tops, reco::GenParticleCollection &  target  )

private

fill output vector for full decay chain

Definition at line 420 of file TopDecaySubset.cc.

References funct::abs(), addDaughters(), addRadiation(), addRadiation_, TopDecayID::bID, edmScanValgrind::buffer, fillMode_, GenParticle::GenParticle, TopDecayID::glueID, kME, kPythia, edm::errors::LogicError, motherPartIdx_, p4(), refs_, showerModel_, TopDecayID::stable, submitPVValidationJobs::t, filterCSVwithJSON::target, TopDecayID::tauID, TopDecayID::tID, TopDecayID::unfrag, and TopDecayID::WID.

Referenced by produce().

                                                                    {
  unsigned int statusFlag;
  // determine status flag of the new
  // particle depending on the FillMode
  fillMode_ == kME ? statusFlag = 3 : statusFlag = 2;

  for (std::vector<const reco::GenParticle*>::const_iterator it = tops.begin(); it != tops.end(); ++it) {
    const reco::GenParticle* t = *it;
    // if particle is top or anti-top
    std::unique_ptr<reco::GenParticle> topPtr(
        new reco::GenParticle(t->threeCharge(), p4(it, statusFlag), t->vertex(), t->pdgId(), statusFlag, false));
    target.push_back(*topPtr);
    ++motherPartIdx_;
    // keep the top index for the map to manage the daughter refs
    int iTop = motherPartIdx_;
    std::vector<int> topDaughters;
    // define the W boson index (to be set later) for the map to
    // manage the daughter refs
    int iW = 0;
    std::vector<int> wDaughters;
    // sanity check
    if (showerModel_ != kPythia && t->begin() == t->end())
      throw edm::Exception(edm::errors::LogicError, "showerModel_!=kPythia && t->begin()==t->end()\n");
    //iterate over top daughters
    for (reco::GenParticle::const_iterator td = ((showerModel_ == kPythia) ? t->begin() : t->begin()->begin());
         td != ((showerModel_ == kPythia) ? t->end() : t->begin()->end());
         ++td) {
      if (td->status() == TopDecayID::unfrag && std::abs(td->pdgId()) <= TopDecayID::bID) {
        // if particle is beauty or other quark
        std::unique_ptr<reco::GenParticle> bPtr(
            new reco::GenParticle(td->threeCharge(), p4(td, statusFlag), td->vertex(), td->pdgId(), statusFlag, false));
        target.push_back(*bPtr);
        // increment & push index of the top daughter
        topDaughters.push_back(++motherPartIdx_);
        if (addRadiation_) {
          addRadiation(motherPartIdx_, td, target);
        }
      }
      // sanity check
      if (showerModel_ != kPythia && td->begin() == td->end())
        throw edm::Exception(edm::errors::LogicError, "showerModel_!=kPythia && td->begin()==td->end()\n");
      reco::GenParticle::const_iterator buffer = (showerModel_ == kPythia) ? td : td->begin();
      if (buffer->status() == TopDecayID::unfrag && std::abs(buffer->pdgId()) == TopDecayID::WID) {
        // if particle is a W boson
        std::unique_ptr<reco::GenParticle> wPtr(new reco::GenParticle(
            buffer->threeCharge(), p4(buffer, statusFlag), buffer->vertex(), buffer->pdgId(), statusFlag, true));
        target.push_back(*wPtr);
        // increment & push index of the top daughter
        topDaughters.push_back(++motherPartIdx_);
        // keep the W idx for the map
        iW = motherPartIdx_;
        if (addRadiation_) {
          addRadiation(motherPartIdx_, buffer, target);
        }
        if (showerModel_ != kPythia && buffer->begin() == buffer->end())
          throw edm::Exception(edm::errors::LogicError, "showerModel_!=kPythia && buffer->begin()==buffer->end()\n");
        // iterate over W daughters
        for (reco::GenParticle::const_iterator wd =
                 ((showerModel_ == kPythia) ? buffer->begin() : buffer->begin()->begin());
             wd != ((showerModel_ == kPythia) ? buffer->end() : buffer->begin()->end());
             ++wd) {
          // make sure the W daughter is of status unfrag and not the W itself
          if (wd->status() == TopDecayID::unfrag && !(std::abs(wd->pdgId()) == TopDecayID::WID)) {
            std::unique_ptr<reco::GenParticle> qPtr(new reco::GenParticle(
                wd->threeCharge(), p4(wd, statusFlag), wd->vertex(), wd->pdgId(), statusFlag, false));
            target.push_back(*qPtr);
            // increment & push index of the top daughter
            wDaughters.push_back(++motherPartIdx_);
            if (wd->status() == TopDecayID::unfrag && std::abs(wd->pdgId()) == TopDecayID::tauID) {
              // add tau daughters if the particle is a tau pass
              // the daughter of the tau which is of status 2
              //addDaughters(motherPartIdx_, wd->begin(), target);
              // add tau daughters if the particle is a tau pass
              // the tau itself, which may add a tau daughter of
              // of status 2 to the listing
              addDaughters(motherPartIdx_, wd, target);
            }
          }
        }
      }
      if (addRadiation_ && buffer->status() == TopDecayID::stable &&
          (buffer->pdgId() == TopDecayID::glueID || std::abs(buffer->pdgId()) < TopDecayID::bID)) {
        // collect additional radiation from the top
        std::unique_ptr<reco::GenParticle> radPtr(new reco::GenParticle(
            buffer->threeCharge(), buffer->p4(), buffer->vertex(), buffer->pdgId(), statusFlag, false));
        target.push_back(*radPtr);
        // increment & push index of the top daughter
        topDaughters.push_back(++motherPartIdx_);
      }
    }
    // add potential sisters of the top quark;
    // only for top to prevent double counting
    if (t->numberOfMothers() > 0 && t->pdgId() == TopDecayID::tID) {
      for (reco::GenParticle::const_iterator ts = t->mother()->begin(); ts != t->mother()->end(); ++ts) {
        // loop over all daughters of the top mother i.e.
        // the two top quarks and their potential sisters
        if (std::abs(ts->pdgId()) != t->pdgId() && ts->pdgId() != t->mother()->pdgId()) {
          // add all further particles but the two top quarks and potential
          // cases where the mother of the top has itself as daughter
          reco::GenParticle* cand =
              new reco::GenParticle(ts->threeCharge(), ts->p4(), ts->vertex(), ts->pdgId(), ts->status(), false);
          std::unique_ptr<reco::GenParticle> sPtr(cand);
          target.push_back(*sPtr);
          if (ts->begin() != ts->end()) {
            // in case the sister has daughters increment
            // and add the first generation of daughters
            addDaughters(++motherPartIdx_, ts->begin(), target, false);
          }
        }
      }
    }
    // fill the map for the administration
    // of daughter indices
    refs_[iTop] = topDaughters;
    refs_[iW] = wDaughters;
  }
}

fillListing() [2/2]

void TopDecaySubset::fillListing ( const std::vector< const reco::GenParticle *> &  primalTops, const std::vector< const reco::GenParticle *> &  decayingTops, reco::GenParticleCollection &  target  )

private

fill output vector for full decay chain

Definition at line 539 of file TopDecaySubset.cc.

References funct::abs(), addDaughters(), addRadiation(), addRadiation_, reco::Candidate::begin(), TopDecayID::bID, reco::Candidate::end(), fillMode_, findLastParticleInChain(), TopDecayID::glueID, kME, motherPartIdx_, refs_, submitPVValidationJobs::t, filterCSVwithJSON::target, TopDecayID::tauID, and TopDecayID::WID.

                                                                    {
  std::vector<const reco::GenParticle*>::const_iterator top_start;
  std::vector<const reco::GenParticle*>::const_iterator top_end;
  if (fillMode_ == kME) {
    top_start = primalTops.begin();
    top_end = primalTops.end();
  } else {
    top_start = decayingTops.begin();
    top_end = decayingTops.end();
  }
  for (std::vector<const reco::GenParticle*>::const_iterator it = top_start; it != top_end; ++it) {
    const reco::GenParticle* t = *it;
    // summation might happen here
    std::unique_ptr<reco::GenParticle> topPtr(
        new reco::GenParticle(t->threeCharge(), t->p4(), t->vertex(), t->pdgId(), t->status(), false));
    target.push_back(*topPtr);
    ++motherPartIdx_;

    // keep the top index for the map to manage the daughter refs
    int iTop = motherPartIdx_;
    std::vector<int> topDaughters;
    // define the W boson index (to be set later) for the map to
    // manage the daughter refs
    int iW = 0;
    std::vector<int> wDaughters;
    const reco::GenParticle* final_top = findLastParticleInChain(t);

    //iterate over top daughters
    for (reco::GenParticle::const_iterator td = final_top->begin(); td != final_top->end(); ++td) {
      if (std::abs(td->pdgId()) <= TopDecayID::bID) {
        // if particle is beauty or other quark
        std::unique_ptr<reco::GenParticle> qPtr(
            new reco::GenParticle(td->threeCharge(), td->p4(), td->vertex(), td->pdgId(), td->status(), false));
        target.push_back(*qPtr);
        // increment & push index of the top daughter
        topDaughters.push_back(++motherPartIdx_);
        if (addRadiation_) {
          // for radation to be added we first need to
          // pick the last quark in the MC chain
          const reco::GenParticle* last_q = findLastParticleInChain(static_cast<const reco::GenParticle*>(&*td));
          addRadiation(motherPartIdx_, last_q, target);
        }
      } else if (std::abs(td->pdgId()) == TopDecayID::WID) {
        // ladies and gentleman, we have a W boson
        std::unique_ptr<reco::GenParticle> WPtr(
            new reco::GenParticle(td->threeCharge(), td->p4(), td->vertex(), td->pdgId(), td->status(), false));
        target.push_back(*WPtr);
        // increment & push index of the top daughter
        topDaughters.push_back(++motherPartIdx_);
        iW = motherPartIdx_;

        // next are the daughers of our W boson
        // for Pythia 6 this is wrong as the last W has no daughters at all!
        // instead the status 3 W has 3 daughters: q qbar' and W (WTF??!)
        const reco::GenParticle* decaying_W = findLastParticleInChain(static_cast<const reco::GenParticle*>(&*td));
        for (reco::GenParticle::const_iterator wd = decaying_W->begin(); wd != decaying_W->end(); ++wd) {
          if (!(std::abs(wd->pdgId()) == TopDecayID::WID)) {
            std::unique_ptr<reco::GenParticle> qPtr(
                new reco::GenParticle(wd->threeCharge(), wd->p4(), wd->vertex(), wd->pdgId(), wd->status(), false));
            target.push_back(*qPtr);
            // increment & push index of the top daughter
            wDaughters.push_back(++motherPartIdx_);
            const reco::GenParticle* last_q = findLastParticleInChain(static_cast<const reco::GenParticle*>(&*wd));
            addRadiation(motherPartIdx_, last_q, target);
            if (std::abs(wd->pdgId()) == TopDecayID::tauID) {
              // add tau daughters
              // currently it adds k-mesons etc as well, which
              // is not what we want.
              addDaughters(motherPartIdx_, wd, target);
            }
          }
        }

      } else {
        if (addRadiation_ && (td->pdgId() == TopDecayID::glueID || std::abs(td->pdgId()) < TopDecayID::bID)) {
          // collect additional radiation from the top
          std::unique_ptr<reco::GenParticle> radPtr(
              new reco::GenParticle(td->threeCharge(), td->p4(), td->vertex(), td->pdgId(), td->status(), false));
          target.push_back(*radPtr);
        }
        //other top daughters like Zq for FCNC
        // for pythia 6 many gluons end up here
        //std::cout << "other top daughters: to be implemented"
        //      << std::endl;
      }
    }

    // fill the map for the administration
    // of daughter indices
    refs_[iTop] = topDaughters;
    refs_[iW] = wDaughters;
  }
}

fillReferences()

void TopDecaySubset::fillReferences ( const reco::GenParticleRefProd &  refProd, reco::GenParticleCollection &  target  )

private

fill references for output vector

Definition at line 775 of file TopDecaySubset.cc.

References BPhysicsValidation_cfi::daughters, Exception, heavyIonCSV_trainingSettings::idx, edm::errors::InvalidReference, AlCaHLTBitMon_ParallelJobs::p, refs_, and EgammaValidation_Wenu_cff::sel.

Referenced by produce().

                                                                                                     {
  int idx = 0;
  for (reco::GenParticleCollection::iterator p = sel.begin(); p != sel.end(); ++p, ++idx) {
    //find daughter reference vectors in refs_ and add daughters
    std::map<int, std::vector<int> >::const_iterator daughters = refs_.find(idx);
    if (daughters != refs_.end()) {
      for (std::vector<int>::const_iterator daughter = daughters->second.begin(); daughter != daughters->second.end();
           ++daughter) {
        reco::GenParticle* part = dynamic_cast<reco::GenParticle*>(&(*p));
        if (part == nullptr) {
          throw edm::Exception(edm::errors::InvalidReference, "Not a GenParticle");
        }
        part->addDaughter(reco::GenParticleRef(ref, *daughter));
        sel[*daughter].addMother(reco::GenParticleRef(ref, idx));
      }
    }
  }
}

findDecayingTops()

std::vector< const reco::GenParticle * > TopDecaySubset::findDecayingTops ( const reco::GenParticleCollection &  parts )

private

find decaying top quarks (quarks that decay to qW) for Pythia6 this is identical to findPrimalTops

Definition at line 239 of file TopDecaySubset.cc.

References funct::abs(), heavyIonCSV_trainingSettings::idx, submitPVValidationJobs::t, and TopDecayID::tID.

Referenced by produce().

                                                                                                         {
  std::vector<const reco::GenParticle*> tops;
  for (reco::GenParticleCollection::const_iterator t = parts.begin(); t != parts.end(); ++t) {
    if (std::abs(t->pdgId()) != TopDecayID::tID)
      continue;

    bool hasTopDaughter = false;
    for (unsigned idx = 0; idx < t->numberOfDaughters(); ++idx) {
      if (std::abs(t->daughter(idx)->pdgId()) == TopDecayID::tID)
        hasTopDaughter = true;
    }

    if (hasTopDaughter)  // not a decaying top
      continue;
    tops.push_back(&(*t));
  }

  return tops;
}

findLastParticleInChain()

const reco::GenParticle * TopDecaySubset::findLastParticleInChain ( const reco::GenParticle *  p )

private

find W bosons that come from top quark decays and decay themselves (end of the MC chain) for Pythia6 this is identical to findPrimalW find the last particle in a (potentially) long chain of state transitions e.g. top[status==22]-> top[status==44 -> top[status==44] -> top[status==44] -> top[status==62] this function would pick the top with status 62

Definition at line 284 of file TopDecaySubset.cc.

References funct::abs(), heavyIonCSV_trainingSettings::idx, kPythia, AlCaHLTBitMon_ParallelJobs::p, EgammaObjectsElectrons_cfi::particleID, and showerModel_.

Referenced by fillListing().

                                                                                       {
  int particleID = std::abs(p->pdgId());
  bool containsItself = false;
  unsigned int d_idx = 0;
  for (unsigned idx = 0; idx < p->numberOfDaughters(); ++idx) {
    if (std::abs(p->daughter(idx)->pdgId()) == particleID) {
      containsItself = true;
      d_idx = idx;
    }
  }

  if (!containsItself)
    return p;
  else {
    if (showerModel_ == kPythia) {
      // Pythia6 has a weird idea of W bosons (and maybe other particles)
      // W (status == 3) -> q qbar' W. The new W is status 2 and has no daughters
      if (p->status() == 3)
        return p;
    }
    return findLastParticleInChain(static_cast<const reco::GenParticle*>(p->daughter(d_idx)));
  }
}

findPrimalTops()

std::vector< const reco::GenParticle * > TopDecaySubset::findPrimalTops ( const reco::GenParticleCollection &  parts )

private

find primal top quarks (top quarks from the hard interaction) for Pythia6 this is identical to findDecayingTops

Definition at line 217 of file TopDecaySubset.cc.

References funct::abs(), heavyIonCSV_trainingSettings::idx, submitPVValidationJobs::t, and TopDecayID::tID.

Referenced by produce().

                                                                                                       {
  std::vector<const reco::GenParticle*> tops;
  for (reco::GenParticleCollection::const_iterator t = parts.begin(); t != parts.end(); ++t) {
    if (std::abs(t->pdgId()) != TopDecayID::tID)
      continue;

    bool hasTopMother = false;
    for (unsigned idx = 0; idx < t->numberOfMothers(); ++idx) {
      if (std::abs(t->mother(idx)->pdgId()) == TopDecayID::tID)
        hasTopMother = true;
    }

    if (hasTopMother)  // not a primal top
      continue;
    tops.push_back(&(*t));
  }

  return tops;
}

findPrimalW()

const reco::GenParticle * TopDecaySubset::findPrimalW ( const reco::GenParticle *  top )

private

find W bosons that come from top quark decays for Pythia6 this is identical to findDecayingW

Definition at line 261 of file TopDecaySubset.cc.

References funct::abs(), reco::CompositeRefCandidateT< D >::daughter(), heavyIonCSV_trainingSettings::idx, reco::CompositeRefCandidateT< D >::numberOfDaughters(), reco::Candidate::pdgId(), and TopDecayID::WID.

                                                                             {
  unsigned int w_index = 0;
  for (unsigned idx = 0; idx < top->numberOfDaughters(); ++idx) {
    if (std::abs(top->daughter(idx)->pdgId()) == TopDecayID::WID) {
      w_index = idx;
      break;
    }
  }
  return static_cast<const reco::GenParticle*>(top->daughter(w_index));
}

findTops()

std::vector< const reco::GenParticle * > TopDecaySubset::findTops ( const reco::GenParticleCollection &  parts )

private

find top quarks in list of input particles

Definition at line 206 of file TopDecaySubset.cc.

References funct::abs(), submitPVValidationJobs::t, TopDecayID::tID, and TopDecayID::unfrag.

Referenced by produce().

                                                                                                 {
  std::vector<const reco::GenParticle*> tops;
  for (reco::GenParticleCollection::const_iterator t = parts.begin(); t != parts.end(); ++t) {
    if (std::abs(t->pdgId()) == TopDecayID::tID && t->status() == TopDecayID::unfrag)
      tops.push_back(&(*t));
  }
  return tops;
}

p4() [1/2]

reco::Particle::LorentzVector TopDecaySubset::p4 ( const std::vector< const reco::GenParticle *>::const_iterator  top, int  statusFlag  )

private

calculate lorentz vector from input (dedicated to top reconstruction)

calculate lorentz vector from input

Definition at line 636 of file TopDecaySubset.cc.

References funct::abs(), AlCaHLTBitMon_ParallelJobs::p, TopDecayID::unfrag, and TopDecayID::WID.

Referenced by Tau.Tau::dxy_approx(), Tau.Tau::dz(), fillListing(), p4(), and Lepton.Lepton::p4WithFSR().

                                                                 {
  // calculate the four vector for top/anti-top quarks from
  // the W boson and the b quark plain or including all
  // additional radiation depending on switch 'plain'
  if (statusFlag == TopDecayID::unfrag) {
    // return 4 momentum as it is
    return (*top)->p4();
  }
  reco::Particle::LorentzVector vec;
  for (reco::GenParticle::const_iterator p = (*top)->begin(); p != (*top)->end(); ++p) {
    if (p->status() == TopDecayID::unfrag) {
      // descend by one level for each
      // status 3 particle on the way
      vec += p4(p, statusFlag);
    } else {
      if (std::abs((*top)->pdgId()) == TopDecayID::WID) {
        // in case of a W boson skip the status
        // 2 particle to prevent double counting
        if (std::abs(p->pdgId()) != TopDecayID::WID)
          vec += p->p4();
      } else {
        // add all four vectors for each stable
        // particle (status 1 or 2) on the way
        vec += p->p4();
        if (vec.mass() - (*top)->mass() > 0) {
          // continue adding up gluons and qqbar pairs on the top
          // line untill the nominal top mass is reached; then
          // break in order to prevent picking up virtualities
          break;
        }
      }
    }
  }
  return vec;
}

p4() [2/2]

reco::Particle::LorentzVector TopDecaySubset::p4 ( const reco::GenParticle::const_iterator  part, int  statusFlag  )

private

calculate lorentz vector from input

calculate lorentz vector from input (dedicated to top reconstruction)

Definition at line 674 of file TopDecaySubset.cc.

References funct::abs(), AlCaHLTBitMon_ParallelJobs::p, p4(), TopDecayID::stable, TopDecayID::unfrag, and TopDecayID::WID.

Referenced by Tau.Tau::dxy_approx(), Tau.Tau::dz(), and Lepton.Lepton::p4WithFSR().

                                                                                                     {
  // calculate the four vector for all top daughters from
  // their daughters including additional radiation
  if (statusFlag == TopDecayID::unfrag) {
    // return 4 momentum as it is
    return part->p4();
  }
  reco::Particle::LorentzVector vec;
  for (reco::GenParticle::const_iterator p = part->begin(); p != part->end(); ++p) {
    if (p->status() <= TopDecayID::stable && std::abs(p->pdgId()) == TopDecayID::WID) {
      vec = p->p4();
    } else {
      if (p->status() <= TopDecayID::stable) {
        // sum up the p4 of all stable particles
        // (of status 1 or 2)
        vec += p->p4();
      } else {
        if (p->status() == TopDecayID::unfrag) {
          // if the particle is unfragmented (i.e.
          // status 3) descend by one level
          vec += p4(p, statusFlag);
        }
      }
    }
  }
  return vec;
}

produce()

void TopDecaySubset::produce ( edm::Event &  event, const edm::EventSetup &  setup  )

override

write output into the event

Definition at line 151 of file TopDecaySubset.cc.

References checkShowerModel(), checkWBosons(), clearReferences(), fillListing(), fillReferences(), findDecayingTops(), findPrimalTops(), findTops(), kNone, kRun1, kRun2, kStart, eostools::move(), runMode_, showerModel_, TrackRefitter_38T_cff::src, srcToken_, and filterCSVwithJSON::target.

                                                                        {
  // create target vector
  std::unique_ptr<reco::GenParticleCollection> target(new reco::GenParticleCollection);

  // get source collection
  edm::Handle<reco::GenParticleCollection> src;
  event.getByToken(srcToken_, src);

  // find out what generator we are dealing with
  if (showerModel_ == kStart && runMode_ == kRun2) {
    showerModel_ = checkShowerModel(event);
  }

  // find top quarks in list of input particles
  std::vector<const reco::GenParticle*> tops;
  if (runMode_ == kRun1)
    tops = findTops(*src);
  else
    tops = findPrimalTops(*src);

  // determine shower model (only in first event)
  if (showerModel_ == kStart && runMode_ == kRun1)
    showerModel_ = checkShowerModel(tops);

  if (showerModel_ != kNone) {
    // check sanity of W bosons
    if (runMode_ == kRun1)
      checkWBosons(tops);
    else {
      // nothing for the moment
    }

    // get ref product from the event
    const reco::GenParticleRefProd ref = event.getRefBeforePut<reco::GenParticleCollection>();
    // clear existing refs
    clearReferences();
    if (runMode_ == kRun1) {
      // fill output
      fillListing(tops, *target);
      // fill references
      fillReferences(ref, *target);
    } else {
      std::vector<const reco::GenParticle*> decaying_tops = findDecayingTops(*src);
      // fill output
      fillListing(tops, decaying_tops, *target);
      // fill references
      fillReferences(ref, *target);
    }
  }

  // write vectors to the event
  event.put(std::move(target));
}

Member Data Documentation

addRadiation_

bool TopDecaySubset::addRadiation_

private

add radiation or not?

Definition at line 102 of file TopDecaySubset.cc.

Referenced by fillListing().

fillMode_

FillMode TopDecaySubset::fillMode_

private

print the whole list of input particles or not? mode of decaySubset creation

Definition at line 105 of file TopDecaySubset.cc.

Referenced by fillListing(), and TopDecaySubset().

genEventInfo_srcToken_

edm::EDGetTokenT<GenEventInfoProduct> TopDecaySubset::genEventInfo_srcToken_

private

input tag for the genEventInfo source

Definition at line 100 of file TopDecaySubset.cc.

Referenced by checkShowerModel().

motherPartIdx_

int TopDecaySubset::motherPartIdx_

private

index in new evt listing of parts with daughters; has to be set to -1 in produce to deliver consistent results!

Definition at line 114 of file TopDecaySubset.cc.

Referenced by clearReferences(), and fillListing().

refs_

std::map<int, std::vector<int> > TopDecaySubset::refs_

private

management of daughter indices for fillRefs

Definition at line 116 of file TopDecaySubset.cc.

Referenced by addDaughters(), addRadiation(), clearReferences(), fillListing(), and fillReferences().

runMode_

RunMode TopDecaySubset::runMode_

private

run mode (Run1 || Run2)

Definition at line 109 of file TopDecaySubset.cc.

Referenced by produce(), and TopDecaySubset().

showerModel_

ShowerModel TopDecaySubset::showerModel_

private

parton shower mode (filled in checkShowerModel)

Definition at line 107 of file TopDecaySubset.cc.

Referenced by checkWBosons(), fillListing(), findLastParticleInChain(), and produce().

srcToken_

edm::EDGetTokenT<reco::GenParticleCollection> TopDecaySubset::srcToken_

private

input tag for the genParticle source

Definition at line 98 of file TopDecaySubset.cc.

Referenced by produce().