RiemannFit.h

Go to the documentation of this file.

#ifndef RecoPixelVertexing_PixelTrackFitting_interface_RiemannFit_h
#define RecoPixelVertexing_PixelTrackFitting_interface_RiemannFit_h

#include "RecoPixelVertexing/PixelTrackFitting/interface/FitUtils.h"

namespace riemannFit {

  template <typename VNd1, typename VNd2>
  __host__ __device__ inline void computeRadLenUniformMaterial(const VNd1& length_values, VNd2& rad_lengths) {
    // Radiation length of the pixel detector in the uniform assumption, with
    // 0.06 rad_len at 16 cm
    constexpr double xx_0_inv = 0.06 / 16.;
    uint n = length_values.rows();
    rad_lengths(0) = length_values(0) * xx_0_inv;
    for (uint j = 1; j < n; ++j) {
      rad_lengths(j) = std::abs(length_values(j) - length_values(j - 1)) * xx_0_inv;
    }
  }

  template <typename V4, typename VNd1, typename VNd2, int N>
  __host__ __device__ inline auto scatterCovLine(Matrix2d const* cov_sz,
                                                 const V4& fast_fit,
                                                 VNd1 const& s_arcs,
                                                 VNd2 const& z_values,
                                                 const double theta,
                                                 const double bField,
                                                 MatrixNd<N>& ret) {
#ifdef RFIT_DEBUG
    riemannFit::printIt(&s_arcs, "Scatter_cov_line - s_arcs: ");
#endif
    constexpr uint n = N;
    double p_t = std::min(20., fast_fit(2) * bField);  // limit pt to avoid too small error!!!
    double p_2 = p_t * p_t * (1. + 1. / sqr(fast_fit(3)));
    VectorNd<N> rad_lengths_S;
    // See documentation at http://eigen.tuxfamily.org/dox/group__TutorialArrayClass.html
    // Basically, to perform cwise operations on Matrices and Vectors, you need
    // to transform them into Array-like objects.
    VectorNd<N> s_values = s_arcs.array() * s_arcs.array() + z_values.array() * z_values.array();
    s_values = s_values.array().sqrt();
    computeRadLenUniformMaterial(s_values, rad_lengths_S);
    VectorNd<N> sig2_S;
    sig2_S = .000225 / p_2 * (1. + 0.038 * rad_lengths_S.array().log()).abs2() * rad_lengths_S.array();
#ifdef RFIT_DEBUG
    riemannFit::printIt(cov_sz, "Scatter_cov_line - cov_sz: ");
#endif
    Matrix2Nd<N> tmp = Matrix2Nd<N>::Zero();
    for (uint k = 0; k < n; ++k) {
      tmp(k, k) = cov_sz[k](0, 0);
      tmp(k + n, k + n) = cov_sz[k](1, 1);
      tmp(k, k + n) = tmp(k + n, k) = cov_sz[k](0, 1);
    }
    for (uint k = 0; k < n; ++k) {
      for (uint l = k; l < n; ++l) {
        for (uint i = 0; i < std::min(k, l); ++i) {
          tmp(k + n, l + n) += std::abs(s_values(k) - s_values(i)) * std::abs(s_values(l) - s_values(i)) * sig2_S(i);
        }
        tmp(l + n, k + n) = tmp(k + n, l + n);
      }
    }
    // We are interested only in the errors orthogonal to the rotated s-axis
    // which, in our formalism, are in the lower square matrix.
#ifdef RFIT_DEBUG
    riemannFit::printIt(&tmp, "Scatter_cov_line - tmp: ");
#endif
    ret = tmp.block(n, n, n, n);
  }

  template <typename M2xN, typename V4, int N>
  __host__ __device__ inline MatrixNd<N> scatter_cov_rad(const M2xN& p2D,
                                                         const V4& fast_fit,
                                                         VectorNd<N> const& rad,
                                                         double B) {
    constexpr uint n = N;
    double p_t = std::min(20., fast_fit(2) * B);  // limit pt to avoid too small error!!!
    double p_2 = p_t * p_t * (1. + 1. / sqr(fast_fit(3)));
    double theta = atan(fast_fit(3));
    theta = theta < 0. ? theta + M_PI : theta;
    VectorNd<N> s_values;
    VectorNd<N> rad_lengths;
    const Vector2d oVec(fast_fit(0), fast_fit(1));

    // associated Jacobian, used in weights and errors computation
    for (uint i = 0; i < n; ++i) {  // x
      Vector2d pVec = p2D.block(0, i, 2, 1) - oVec;
      const double cross = cross2D(-oVec, pVec);
      const double dot = (-oVec).dot(pVec);
      const double tempAtan2 = atan2(cross, dot);
      s_values(i) = std::abs(tempAtan2 * fast_fit(2));
    }
    computeRadLenUniformMaterial(s_values * sqrt(1. + 1. / sqr(fast_fit(3))), rad_lengths);
    MatrixNd<N> scatter_cov_rad = MatrixNd<N>::Zero();
    VectorNd<N> sig2 = (1. + 0.038 * rad_lengths.array().log()).abs2() * rad_lengths.array();
    sig2 *= 0.000225 / (p_2 * sqr(sin(theta)));
    for (uint k = 0; k < n; ++k) {
      for (uint l = k; l < n; ++l) {
        for (uint i = 0; i < std::min(k, l); ++i) {
          scatter_cov_rad(k, l) += (rad(k) - rad(i)) * (rad(l) - rad(i)) * sig2(i);
        }
        scatter_cov_rad(l, k) = scatter_cov_rad(k, l);
      }
    }
#ifdef RFIT_DEBUG
    riemannFit::printIt(&scatter_cov_rad, "Scatter_cov_rad - scatter_cov_rad: ");
#endif
    return scatter_cov_rad;
  }

  template <typename M2xN, int N>
  __host__ __device__ inline Matrix2Nd<N> cov_radtocart(const M2xN& p2D,
                                                        const MatrixNd<N>& cov_rad,
                                                        const VectorNd<N>& rad) {
#ifdef RFIT_DEBUG
    printf("Address of p2D: %p\n", &p2D);
#endif
    printIt(&p2D, "cov_radtocart - p2D:");
    constexpr uint n = N;
    Matrix2Nd<N> cov_cart = Matrix2Nd<N>::Zero();
    VectorNd<N> rad_inv = rad.cwiseInverse();
    printIt(&rad_inv, "cov_radtocart - rad_inv:");
    for (uint i = 0; i < n; ++i) {
      for (uint j = i; j < n; ++j) {
        cov_cart(i, j) = cov_rad(i, j) * p2D(1, i) * rad_inv(i) * p2D(1, j) * rad_inv(j);
        cov_cart(i + n, j + n) = cov_rad(i, j) * p2D(0, i) * rad_inv(i) * p2D(0, j) * rad_inv(j);
        cov_cart(i, j + n) = -cov_rad(i, j) * p2D(1, i) * rad_inv(i) * p2D(0, j) * rad_inv(j);
        cov_cart(i + n, j) = -cov_rad(i, j) * p2D(0, i) * rad_inv(i) * p2D(1, j) * rad_inv(j);
        cov_cart(j, i) = cov_cart(i, j);
        cov_cart(j + n, i + n) = cov_cart(i + n, j + n);
        cov_cart(j + n, i) = cov_cart(i, j + n);
        cov_cart(j, i + n) = cov_cart(i + n, j);
      }
    }
    return cov_cart;
  }

  template <typename M2xN, int N>
  __host__ __device__ inline VectorNd<N> cov_carttorad(const M2xN& p2D,
                                                       const Matrix2Nd<N>& cov_cart,
                                                       const VectorNd<N>& rad) {
    constexpr uint n = N;
    VectorNd<N> cov_rad;
    const VectorNd<N> rad_inv2 = rad.cwiseInverse().array().square();
    for (uint i = 0; i < n; ++i) {
      if (rad(i) < 1.e-4)
        cov_rad(i) = cov_cart(i, i);
      else {
        cov_rad(i) = rad_inv2(i) * (cov_cart(i, i) * sqr(p2D(1, i)) + cov_cart(i + n, i + n) * sqr(p2D(0, i)) -
                                    2. * cov_cart(i, i + n) * p2D(0, i) * p2D(1, i));
      }
    }
    return cov_rad;
  }

  template <typename M2xN, typename V4, int N>
  __host__ __device__ inline VectorNd<N> cov_carttorad_prefit(const M2xN& p2D,
                                                              const Matrix2Nd<N>& cov_cart,
                                                              V4& fast_fit,
                                                              const VectorNd<N>& rad) {
    constexpr uint n = N;
    VectorNd<N> cov_rad;
    for (uint i = 0; i < n; ++i) {
      if (rad(i) < 1.e-4)
        cov_rad(i) = cov_cart(i, i);  // TO FIX
      else {
        Vector2d a = p2D.col(i);
        Vector2d b = p2D.col(i) - fast_fit.head(2);
        const double x2 = a.dot(b);
        const double y2 = cross2D(a, b);
        const double tan_c = -y2 / x2;
        const double tan_c2 = sqr(tan_c);
        cov_rad(i) =
            1. / (1. + tan_c2) * (cov_cart(i, i) + cov_cart(i + n, i + n) * tan_c2 + 2 * cov_cart(i, i + n) * tan_c);
      }
    }
    return cov_rad;
  }

  template <int N>
  __host__ __device__ inline VectorNd<N> weightCircle(const MatrixNd<N>& cov_rad_inv) {
    return cov_rad_inv.colwise().sum().transpose();
  }

  template <typename M2xN>
  __host__ __device__ inline int32_t charge(const M2xN& p2D, const Vector3d& par_uvr) {
    return ((p2D(0, 1) - p2D(0, 0)) * (par_uvr.y() - p2D(1, 0)) - (p2D(1, 1) - p2D(1, 0)) * (par_uvr.x() - p2D(0, 0)) >
            0)
               ? -1
               : 1;
  }

  __host__ __device__ inline Vector3d min_eigen3D(const Matrix3d& A, double& chi2) {
#ifdef RFIT_DEBUG
    printf("min_eigen3D - enter\n");
#endif
    Eigen::SelfAdjointEigenSolver<Matrix3d> solver(3);
    solver.computeDirect(A);
    int min_index;
    chi2 = solver.eigenvalues().minCoeff(&min_index);
#ifdef RFIT_DEBUG
    printf("min_eigen3D - exit\n");
#endif
    return solver.eigenvectors().col(min_index);
  }

  __host__ __device__ inline Vector3d min_eigen3D_fast(const Matrix3d& A) {
    Eigen::SelfAdjointEigenSolver<Matrix3f> solver(3);
    solver.computeDirect(A.cast<float>());
    int min_index;
    solver.eigenvalues().minCoeff(&min_index);
    return solver.eigenvectors().col(min_index).cast<double>();
  }

  __host__ __device__ inline Vector2d min_eigen2D(const Matrix2d& aMat, double& chi2) {
    Eigen::SelfAdjointEigenSolver<Matrix2d> solver(2);
    solver.computeDirect(aMat);
    int min_index;
    chi2 = solver.eigenvalues().minCoeff(&min_index);
    return solver.eigenvectors().col(min_index);
  }

  template <typename M3xN, typename V4>
  __host__ __device__ inline void fastFit(const M3xN& hits, V4& result) {
    constexpr uint32_t N = M3xN::ColsAtCompileTime;
    constexpr auto n = N;  // get the number of hits
    printIt(&hits, "Fast_fit - hits: ");

    // CIRCLE FIT
    // Make segments between middle-to-first(b) and last-to-first(c) hits
    const Vector2d bVec = hits.block(0, n / 2, 2, 1) - hits.block(0, 0, 2, 1);
    const Vector2d cVec = hits.block(0, n - 1, 2, 1) - hits.block(0, 0, 2, 1);
    printIt(&bVec, "Fast_fit - b: ");
    printIt(&cVec, "Fast_fit - c: ");
    // Compute their lengths
    auto b2 = bVec.squaredNorm();
    auto c2 = cVec.squaredNorm();
    // The algebra has been verified (MR). The usual approach has been followed:
    // * use an orthogonal reference frame passing from the first point.
    // * build the segments (chords)
    // * build orthogonal lines through mid points
    // * make a system and solve for X0 and Y0.
    // * add the initial point
    bool flip = abs(bVec.x()) < abs(bVec.y());
    auto bx = flip ? bVec.y() : bVec.x();
    auto by = flip ? bVec.x() : bVec.y();
    auto cx = flip ? cVec.y() : cVec.x();
    auto cy = flip ? cVec.x() : cVec.y();
    auto div = 2. * (cx * by - bx * cy);
    // if aligned TO FIX
    auto y0 = (cx * b2 - bx * c2) / div;
    auto x0 = (0.5 * b2 - y0 * by) / bx;
    result(0) = hits(0, 0) + (flip ? y0 : x0);
    result(1) = hits(1, 0) + (flip ? x0 : y0);
    result(2) = sqrt(sqr(x0) + sqr(y0));
    printIt(&result, "Fast_fit - result: ");

    // LINE FIT
    const Vector2d dVec = hits.block(0, 0, 2, 1) - result.head(2);
    const Vector2d eVec = hits.block(0, n - 1, 2, 1) - result.head(2);
    printIt(&eVec, "Fast_fit - e: ");
    printIt(&dVec, "Fast_fit - d: ");
    // Compute the arc-length between first and last point: L = R * theta = R * atan (tan (Theta) )
    auto dr = result(2) * atan2(cross2D(dVec, eVec), dVec.dot(eVec));
    // Simple difference in Z between last and first hit
    auto dz = hits(2, n - 1) - hits(2, 0);

    result(3) = (dr / dz);

#ifdef RFIT_DEBUG
    printf("Fast_fit: [%f, %f, %f, %f]\n", result(0), result(1), result(2), result(3));
#endif
  }

  template <typename M2xN, typename V4, int N>
  __host__ __device__ inline CircleFit circleFit(const M2xN& hits2D,
                                                 const Matrix2Nd<N>& hits_cov2D,
                                                 const V4& fast_fit,
                                                 const VectorNd<N>& rad,
                                                 const double bField,
                                                 const bool error) {
#ifdef RFIT_DEBUG
    printf("circle_fit - enter\n");
#endif
    // INITIALIZATION
    Matrix2Nd<N> vMat = hits_cov2D;
    constexpr uint n = N;
    printIt(&hits2D, "circle_fit - hits2D:");
    printIt(&hits_cov2D, "circle_fit - hits_cov2D:");

#ifdef RFIT_DEBUG
    printf("circle_fit - WEIGHT COMPUTATION\n");
#endif
    // WEIGHT COMPUTATION
    VectorNd<N> weight;
    MatrixNd<N> gMat;
    double renorm;
    {
      MatrixNd<N> cov_rad = cov_carttorad_prefit(hits2D, vMat, fast_fit, rad).asDiagonal();
      MatrixNd<N> scatterCovRadMat = scatter_cov_rad(hits2D, fast_fit, rad, bField);
      printIt(&scatterCovRadMat, "circle_fit - scatter_cov_rad:");
      printIt(&hits2D, "circle_fit - hits2D bis:");
#ifdef RFIT_DEBUG
      printf("Address of hits2D: a) %p\n", &hits2D);
#endif
      vMat += cov_radtocart(hits2D, scatterCovRadMat, rad);
      printIt(&vMat, "circle_fit - V:");
      cov_rad += scatterCovRadMat;
      printIt(&cov_rad, "circle_fit - cov_rad:");
      math::cholesky::invert(cov_rad, gMat);
      // gMat = cov_rad.inverse();
      renorm = gMat.sum();
      gMat *= 1. / renorm;
      weight = weightCircle(gMat);
    }
    printIt(&weight, "circle_fit - weight:");

    // SPACE TRANSFORMATION
#ifdef RFIT_DEBUG
    printf("circle_fit - SPACE TRANSFORMATION\n");
#endif

    // center
#ifdef RFIT_DEBUG
    printf("Address of hits2D: b) %p\n", &hits2D);
#endif
    const Vector2d hCentroid = hits2D.rowwise().mean();  // centroid
    printIt(&hCentroid, "circle_fit - h_:");
    Matrix3xNd<N> p3D;
    p3D.block(0, 0, 2, n) = hits2D.colwise() - hCentroid;
    printIt(&p3D, "circle_fit - p3D: a)");
    Vector2Nd<N> mc;  // centered hits, used in error computation
    mc << p3D.row(0).transpose(), p3D.row(1).transpose();
    printIt(&mc, "circle_fit - mc(centered hits):");

    // scale
    const double tempQ = mc.squaredNorm();
    const double tempS = sqrt(n * 1. / tempQ);  // scaling factor
    p3D.block(0, 0, 2, n) *= tempS;

    // project on paraboloid
    p3D.row(2) = p3D.block(0, 0, 2, n).colwise().squaredNorm();
    printIt(&p3D, "circle_fit - p3D: b)");

#ifdef RFIT_DEBUG
    printf("circle_fit - COST FUNCTION\n");
#endif
    // COST FUNCTION

    // compute
    Vector3d r0;
    r0.noalias() = p3D * weight;  // center of gravity
    const Matrix3xNd<N> xMat = p3D.colwise() - r0;
    Matrix3d aMat = xMat * gMat * xMat.transpose();
    printIt(&aMat, "circle_fit - A:");

#ifdef RFIT_DEBUG
    printf("circle_fit - MINIMIZE\n");
#endif
    // minimize
    double chi2;
    Vector3d vVec = min_eigen3D(aMat, chi2);
#ifdef RFIT_DEBUG
    printf("circle_fit - AFTER MIN_EIGEN\n");
#endif
    printIt(&vVec, "v BEFORE INVERSION");
    vVec *= (vVec(2) > 0) ? 1 : -1;  // TO FIX dovrebbe essere N(3)>0
    printIt(&vVec, "v AFTER INVERSION");
    // This hack to be able to run on GPU where the automatic assignment to a
    // double from the vector multiplication is not working.
#ifdef RFIT_DEBUG
    printf("circle_fit - AFTER MIN_EIGEN 1\n");
#endif
    Eigen::Matrix<double, 1, 1> cm;
#ifdef RFIT_DEBUG
    printf("circle_fit - AFTER MIN_EIGEN 2\n");
#endif
    cm = -vVec.transpose() * r0;
#ifdef RFIT_DEBUG
    printf("circle_fit - AFTER MIN_EIGEN 3\n");
#endif
    const double tempC = cm(0, 0);

#ifdef RFIT_DEBUG
    printf("circle_fit - COMPUTE CIRCLE PARAMETER\n");
#endif
    // COMPUTE CIRCLE PARAMETER

    // auxiliary quantities
    const double tempH = sqrt(1. - sqr(vVec(2)) - 4. * tempC * vVec(2));
    const double v2x2_inv = 1. / (2. * vVec(2));
    const double s_inv = 1. / tempS;
    Vector3d par_uvr;  // used in error propagation
    par_uvr << -vVec(0) * v2x2_inv, -vVec(1) * v2x2_inv, tempH * v2x2_inv;

    CircleFit circle;
    circle.par << par_uvr(0) * s_inv + hCentroid(0), par_uvr(1) * s_inv + hCentroid(1), par_uvr(2) * s_inv;
    circle.qCharge = charge(hits2D, circle.par);
    circle.chi2 = abs(chi2) * renorm / sqr(2 * vVec(2) * par_uvr(2) * tempS);
    printIt(&circle.par, "circle_fit - CIRCLE PARAMETERS:");
    printIt(&circle.cov, "circle_fit - CIRCLE COVARIANCE:");
#ifdef RFIT_DEBUG
    printf("circle_fit - CIRCLE CHARGE: %d\n", circle.qCharge);
#endif

#ifdef RFIT_DEBUG
    printf("circle_fit - ERROR PROPAGATION\n");
#endif
    // ERROR PROPAGATION
    if (error) {
#ifdef RFIT_DEBUG
      printf("circle_fit - ERROR PRPAGATION ACTIVATED\n");
#endif
      ArrayNd<N> vcsMat[2][2];  // cov matrix of center & scaled points
      MatrixNd<N> cMat[3][3];   // cov matrix of 3D transformed points
#ifdef RFIT_DEBUG
      printf("circle_fit - ERROR PRPAGATION ACTIVATED 2\n");
#endif
      {
        Eigen::Matrix<double, 1, 1> cm;
        Eigen::Matrix<double, 1, 1> cm2;
        cm = mc.transpose() * vMat * mc;
        const double tempC2 = cm(0, 0);
        Matrix2Nd<N> tempVcsMat;
        tempVcsMat.template triangularView<Eigen::Upper>() =
            (sqr(tempS) * vMat + sqr(sqr(tempS)) * 1. / (4. * tempQ * n) *
                                     (2. * vMat.squaredNorm() + 4. * tempC2) *  // mc.transpose() * V * mc) *
                                     (mc * mc.transpose()));

        printIt(&tempVcsMat, "circle_fit - Vcs:");
        cMat[0][0] = tempVcsMat.block(0, 0, n, n).template selfadjointView<Eigen::Upper>();
        vcsMat[0][1] = tempVcsMat.block(0, n, n, n);
        cMat[1][1] = tempVcsMat.block(n, n, n, n).template selfadjointView<Eigen::Upper>();
        vcsMat[1][0] = vcsMat[0][1].transpose();
        printIt(&tempVcsMat, "circle_fit - Vcs:");
      }

      {
        const ArrayNd<N> t0 = (VectorXd::Constant(n, 1.) * p3D.row(0));
        const ArrayNd<N> t1 = (VectorXd::Constant(n, 1.) * p3D.row(1));
        const ArrayNd<N> t00 = p3D.row(0).transpose() * p3D.row(0);
        const ArrayNd<N> t01 = p3D.row(0).transpose() * p3D.row(1);
        const ArrayNd<N> t11 = p3D.row(1).transpose() * p3D.row(1);
        const ArrayNd<N> t10 = t01.transpose();
        vcsMat[0][0] = cMat[0][0];
        cMat[0][1] = vcsMat[0][1];
        cMat[0][2] = 2. * (vcsMat[0][0] * t0 + vcsMat[0][1] * t1);
        vcsMat[1][1] = cMat[1][1];
        cMat[1][2] = 2. * (vcsMat[1][0] * t0 + vcsMat[1][1] * t1);
        MatrixNd<N> tmp;
        tmp.template triangularView<Eigen::Upper>() =
            (2. * (vcsMat[0][0] * vcsMat[0][0] + vcsMat[0][0] * vcsMat[0][1] + vcsMat[1][1] * vcsMat[1][0] +
                   vcsMat[1][1] * vcsMat[1][1]) +
             4. * (vcsMat[0][0] * t00 + vcsMat[0][1] * t01 + vcsMat[1][0] * t10 + vcsMat[1][1] * t11))
                .matrix();
        cMat[2][2] = tmp.template selfadjointView<Eigen::Upper>();
      }
      printIt(&cMat[0][0], "circle_fit - C[0][0]:");

      Matrix3d c0Mat;  // cov matrix of center of gravity (r0.x,r0.y,r0.z)
      for (uint i = 0; i < 3; ++i) {
        for (uint j = i; j < 3; ++j) {
          Eigen::Matrix<double, 1, 1> tmp;
          tmp = weight.transpose() * cMat[i][j] * weight;
          // Workaround to get things working in GPU
          const double tempC = tmp(0, 0);
          c0Mat(i, j) = tempC;  //weight.transpose() * C[i][j] * weight;
          c0Mat(j, i) = c0Mat(i, j);
        }
      }
      printIt(&c0Mat, "circle_fit - C0:");

      const MatrixNd<N> wMat = weight * weight.transpose();
      const MatrixNd<N> hMat = MatrixNd<N>::Identity().rowwise() - weight.transpose();
      const MatrixNx3d<N> s_v = hMat * p3D.transpose();
      printIt(&wMat, "circle_fit - W:");
      printIt(&hMat, "circle_fit - H:");
      printIt(&s_v, "circle_fit - s_v:");

      MatrixNd<N> dMat[3][3];  // cov(s_v)
      dMat[0][0] = (hMat * cMat[0][0] * hMat.transpose()).cwiseProduct(wMat);
      dMat[0][1] = (hMat * cMat[0][1] * hMat.transpose()).cwiseProduct(wMat);
      dMat[0][2] = (hMat * cMat[0][2] * hMat.transpose()).cwiseProduct(wMat);
      dMat[1][1] = (hMat * cMat[1][1] * hMat.transpose()).cwiseProduct(wMat);
      dMat[1][2] = (hMat * cMat[1][2] * hMat.transpose()).cwiseProduct(wMat);
      dMat[2][2] = (hMat * cMat[2][2] * hMat.transpose()).cwiseProduct(wMat);
      dMat[1][0] = dMat[0][1].transpose();
      dMat[2][0] = dMat[0][2].transpose();
      dMat[2][1] = dMat[1][2].transpose();
      printIt(&dMat[0][0], "circle_fit - D_[0][0]:");

      constexpr uint nu[6][2] = {{0, 0}, {0, 1}, {0, 2}, {1, 1}, {1, 2}, {2, 2}};

      Matrix6d eMat;  // cov matrix of the 6 independent elements of A
      for (uint a = 0; a < 6; ++a) {
        const uint i = nu[a][0], j = nu[a][1];
        for (uint b = a; b < 6; ++b) {
          const uint k = nu[b][0], l = nu[b][1];
          VectorNd<N> t0(n);
          VectorNd<N> t1(n);
          if (l == k) {
            t0 = 2. * dMat[j][l] * s_v.col(l);
            if (i == j)
              t1 = t0;
            else
              t1 = 2. * dMat[i][l] * s_v.col(l);
          } else {
            t0 = dMat[j][l] * s_v.col(k) + dMat[j][k] * s_v.col(l);
            if (i == j)
              t1 = t0;
            else
              t1 = dMat[i][l] * s_v.col(k) + dMat[i][k] * s_v.col(l);
          }

          if (i == j) {
            Eigen::Matrix<double, 1, 1> cm;
            cm = s_v.col(i).transpose() * (t0 + t1);
            // Workaround to get things working in GPU
            const double tempC = cm(0, 0);
            eMat(a, b) = 0. + tempC;
          } else {
            Eigen::Matrix<double, 1, 1> cm;
            cm = (s_v.col(i).transpose() * t0) + (s_v.col(j).transpose() * t1);
            // Workaround to get things working in GPU
            const double tempC = cm(0, 0);
            eMat(a, b) = 0. + tempC;  //(s_v.col(i).transpose() * t0) + (s_v.col(j).transpose() * t1);
          }
          if (b != a)
            eMat(b, a) = eMat(a, b);
        }
      }
      printIt(&eMat, "circle_fit - E:");

      Eigen::Matrix<double, 3, 6> j2Mat;  // Jacobian of min_eigen() (numerically computed)
      for (uint a = 0; a < 6; ++a) {
        const uint i = nu[a][0], j = nu[a][1];
        Matrix3d delta = Matrix3d::Zero();
        delta(i, j) = delta(j, i) = abs(aMat(i, j) * epsilon);
        j2Mat.col(a) = min_eigen3D_fast(aMat + delta);
        const int sign = (j2Mat.col(a)(2) > 0) ? 1 : -1;
        j2Mat.col(a) = (j2Mat.col(a) * sign - vVec) / delta(i, j);
      }
      printIt(&j2Mat, "circle_fit - J2:");

      Matrix4d cvcMat;  // joint cov matrix of (v0,v1,v2,c)
      {
        Matrix3d t0 = j2Mat * eMat * j2Mat.transpose();
        Vector3d t1 = -t0 * r0;
        cvcMat.block(0, 0, 3, 3) = t0;
        cvcMat.block(0, 3, 3, 1) = t1;
        cvcMat.block(3, 0, 1, 3) = t1.transpose();
        Eigen::Matrix<double, 1, 1> cm1;
        Eigen::Matrix<double, 1, 1> cm3;
        cm1 = (vVec.transpose() * c0Mat * vVec);
        //      cm2 = (c0Mat.cwiseProduct(t0)).sum();
        cm3 = (r0.transpose() * t0 * r0);
        // Workaround to get things working in GPU
        const double tempC = cm1(0, 0) + (c0Mat.cwiseProduct(t0)).sum() + cm3(0, 0);
        cvcMat(3, 3) = tempC;
        // (v.transpose() * c0Mat * v) + (c0Mat.cwiseProduct(t0)).sum() + (r0.transpose() * t0 * r0);
      }
      printIt(&cvcMat, "circle_fit - Cvc:");

      Eigen::Matrix<double, 3, 4> j3Mat;  // Jacobian (v0,v1,v2,c)->(X0,Y0,R)
      {
        const double t = 1. / tempH;
        j3Mat << -v2x2_inv, 0, vVec(0) * sqr(v2x2_inv) * 2., 0, 0, -v2x2_inv, vVec(1) * sqr(v2x2_inv) * 2., 0,
            vVec(0) * v2x2_inv * t, vVec(1) * v2x2_inv * t,
            -tempH * sqr(v2x2_inv) * 2. - (2. * tempC + vVec(2)) * v2x2_inv * t, -t;
      }
      printIt(&j3Mat, "circle_fit - J3:");

      const RowVector2Nd<N> Jq = mc.transpose() * tempS * 1. / n;  // var(q)
      printIt(&Jq, "circle_fit - Jq:");

      Matrix3d cov_uvr = j3Mat * cvcMat * j3Mat.transpose() * sqr(s_inv)  // cov(X0,Y0,R)
                         + (par_uvr * par_uvr.transpose()) * (Jq * vMat * Jq.transpose());

      circle.cov = cov_uvr;
    }

    printIt(&circle.cov, "Circle cov:");
#ifdef RFIT_DEBUG
    printf("circle_fit - exit\n");
#endif
    return circle;
  }

  template <typename M3xN, typename M6xN, typename V4>
  __host__ __device__ inline LineFit lineFit(const M3xN& hits,
                                             const M6xN& hits_ge,
                                             const CircleFit& circle,
                                             const V4& fast_fit,
                                             const double bField,
                                             const bool error) {
    constexpr uint32_t N = M3xN::ColsAtCompileTime;
    constexpr auto n = N;
    double theta = -circle.qCharge * atan(fast_fit(3));
    theta = theta < 0. ? theta + M_PI : theta;

    // Prepare the Rotation Matrix to rotate the points
    Eigen::Matrix<double, 2, 2> rot;
    rot << sin(theta), cos(theta), -cos(theta), sin(theta);

    // PROJECTION ON THE CILINDER
    //
    // p2D will be:
    // [s1, s2, s3, ..., sn]
    // [z1, z2, z3, ..., zn]
    // s values will be ordinary x-values
    // z values will be ordinary y-values

    Matrix2xNd<N> p2D = Matrix2xNd<N>::Zero();
    Eigen::Matrix<double, 2, 6> jxMat;

#ifdef RFIT_DEBUG
    printf("Line_fit - B: %g\n", bField);
    printIt(&hits, "Line_fit points: ");
    printIt(&hits_ge, "Line_fit covs: ");
    printIt(&rot, "Line_fit rot: ");
#endif
    // x & associated Jacobian
    // cfr https://indico.cern.ch/event/663159/contributions/2707659/attachments/1517175/2368189/Riemann_fit.pdf
    // Slide 11
    // a ==> -o i.e. the origin of the circle in XY plane, negative
    // b ==> p i.e. distances of the points wrt the origin of the circle.
    const Vector2d oVec(circle.par(0), circle.par(1));

    // associated Jacobian, used in weights and errors computation
    Matrix6d covMat = Matrix6d::Zero();
    Matrix2d cov_sz[N];
    for (uint i = 0; i < n; ++i) {
      Vector2d pVec = hits.block(0, i, 2, 1) - oVec;
      const double cross = cross2D(-oVec, pVec);
      const double dot = (-oVec).dot(pVec);
      // atan2(cross, dot) give back the angle in the transverse plane so tha the
      // final equation reads: x_i = -q*R*theta (theta = angle returned by atan2)
      const double tempQAtan2 = -circle.qCharge * atan2(cross, dot);
      //    p2D.coeffRef(1, i) = atan2_ * circle.par(2);
      p2D(0, i) = tempQAtan2 * circle.par(2);

      // associated Jacobian, used in weights and errors- computation
      const double temp0 = -circle.qCharge * circle.par(2) * 1. / (sqr(dot) + sqr(cross));
      double d_X0 = 0., d_Y0 = 0., d_R = 0.;  // good approximation for big pt and eta
      if (error) {
        d_X0 = -temp0 * ((pVec(1) + oVec(1)) * dot - (pVec(0) - oVec(0)) * cross);
        d_Y0 = temp0 * ((pVec(0) + oVec(0)) * dot - (oVec(1) - pVec(1)) * cross);
        d_R = tempQAtan2;
      }
      const double d_x = temp0 * (oVec(1) * dot + oVec(0) * cross);
      const double d_y = temp0 * (-oVec(0) * dot + oVec(1) * cross);
      jxMat << d_X0, d_Y0, d_R, d_x, d_y, 0., 0., 0., 0., 0., 0., 1.;

      covMat.block(0, 0, 3, 3) = circle.cov;
      covMat(3, 3) = hits_ge.col(i)[0];                 // x errors
      covMat(4, 4) = hits_ge.col(i)[2];                 // y errors
      covMat(5, 5) = hits_ge.col(i)[5];                 // z errors
      covMat(3, 4) = covMat(4, 3) = hits_ge.col(i)[1];  // cov_xy
      covMat(3, 5) = covMat(5, 3) = hits_ge.col(i)[3];  // cov_xz
      covMat(4, 5) = covMat(5, 4) = hits_ge.col(i)[4];  // cov_yz
      Matrix2d tmp = jxMat * covMat * jxMat.transpose();
      cov_sz[i].noalias() = rot * tmp * rot.transpose();
    }
    // Math of d_{X0,Y0,R,x,y} all verified by hand
    p2D.row(1) = hits.row(2);

    // The following matrix will contain errors orthogonal to the rotated S
    // component only, with the Multiple Scattering properly treated!!
    MatrixNd<N> cov_with_ms;
    scatterCovLine(cov_sz, fast_fit, p2D.row(0), p2D.row(1), theta, bField, cov_with_ms);
#ifdef RFIT_DEBUG
    printIt(cov_sz, "line_fit - cov_sz:");
    printIt(&cov_with_ms, "line_fit - cov_with_ms: ");
#endif

    // Rotate Points with the shape [2, n]
    Matrix2xNd<N> p2D_rot = rot * p2D;

#ifdef RFIT_DEBUG
    printf("Fast fit Tan(theta): %g\n", fast_fit(3));
    printf("Rotation angle: %g\n", theta);
    printIt(&rot, "Rotation Matrix:");
    printIt(&p2D, "Original Hits(s,z):");
    printIt(&p2D_rot, "Rotated hits(S3D, Z'):");
    printIt(&rot, "Rotation Matrix:");
#endif

    // Build the A Matrix
    Matrix2xNd<N> aMat;
    aMat << MatrixXd::Ones(1, n), p2D_rot.row(0);  // rotated s values

#ifdef RFIT_DEBUG
    printIt(&aMat, "A Matrix:");
#endif

    // Build A^T V-1 A, where V-1 is the covariance of only the Y components.
    MatrixNd<N> vyInvMat;
    math::cholesky::invert(cov_with_ms, vyInvMat);
    // MatrixNd<N> vyInvMat = cov_with_ms.inverse();
    Eigen::Matrix<double, 2, 2> covParamsMat = aMat * vyInvMat * aMat.transpose();
    // Compute the Covariance Matrix of the fit parameters
    math::cholesky::invert(covParamsMat, covParamsMat);

    // Now Compute the Parameters in the form [2,1]
    // The first component is q.
    // The second component is m.
    Eigen::Matrix<double, 2, 1> sol = covParamsMat * aMat * vyInvMat * p2D_rot.row(1).transpose();

#ifdef RFIT_DEBUG
    printIt(&sol, "Rotated solutions:");
#endif

    // We need now to transfer back the results in the original s-z plane
    const auto sinTheta = sin(theta);
    const auto cosTheta = cos(theta);
    auto common_factor = 1. / (sinTheta - sol(1, 0) * cosTheta);
    Eigen::Matrix<double, 2, 2> jMat;
    jMat << 0., common_factor * common_factor, common_factor, sol(0, 0) * cosTheta * common_factor * common_factor;

    double tempM = common_factor * (sol(1, 0) * sinTheta + cosTheta);
    double tempQ = common_factor * sol(0, 0);
    auto cov_mq = jMat * covParamsMat * jMat.transpose();

    VectorNd<N> res = p2D_rot.row(1).transpose() - aMat.transpose() * sol;
    double chi2 = res.transpose() * vyInvMat * res;

    LineFit line;
    line.par << tempM, tempQ;
    line.cov << cov_mq;
    line.chi2 = chi2;

#ifdef RFIT_DEBUG
    printf("Common_factor: %g\n", common_factor);
    printIt(&jMat, "Jacobian:");
    printIt(&sol, "Rotated solutions:");
    printIt(&covParamsMat, "Cov_params:");
    printIt(&cov_mq, "Rotated Covariance Matrix:");
    printIt(&(line.par), "Real Parameters:");
    printIt(&(line.cov), "Real Covariance Matrix:");
    printf("Chi2: %g\n", chi2);
#endif

    return line;
  }

  template <int N>
  inline HelixFit helixFit(const Matrix3xNd<N>& hits,
                           const Eigen::Matrix<float, 6, N>& hits_ge,
                           const double bField,
                           const bool error) {
    constexpr uint n = N;
    VectorNd<4> rad = (hits.block(0, 0, 2, n).colwise().norm());

    // Fast_fit gives back (X0, Y0, R, theta) w/o errors, using only 3 points.
    Vector4d fast_fit;
    fastFit(hits, fast_fit);
    riemannFit::Matrix2Nd<N> hits_cov = MatrixXd::Zero(2 * n, 2 * n);
    riemannFit::loadCovariance2D(hits_ge, hits_cov);
    CircleFit circle = circleFit(hits.block(0, 0, 2, n), hits_cov, fast_fit, rad, bField, error);
    LineFit line = lineFit(hits, hits_ge, circle, fast_fit, bField, error);

    par_uvrtopak(circle, bField, error);

    HelixFit helix;
    helix.par << circle.par, line.par;
    if (error) {
      helix.cov = MatrixXd::Zero(5, 5);
      helix.cov.block(0, 0, 3, 3) = circle.cov;
      helix.cov.block(3, 3, 2, 2) = line.cov;
    }
    helix.qCharge = circle.qCharge;
    helix.chi2_circle = circle.chi2;
    helix.chi2_line = line.chi2;

    return helix;
  }

}  // namespace riemannFit

#endif  // RecoPixelVertexing_PixelTrackFitting_interface_RiemannFit_h