SiStripEventSummary.cc

Go to the documentation of this file.

#include "DataFormats/SiStripCommon/interface/SiStripEventSummary.h"
#include "DataFormats/SiStripCommon/interface/SiStripEnumsAndStrings.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"
#include <iostream>
#include <iomanip>

using namespace sistrip;

// -----------------------------------------------------------------------------
//
SiStripEventSummary::SiStripEventSummary()
    : valid_(true),
      triggerFed_(0),
      runType_(sistrip::UNDEFINED_RUN_TYPE),
      event_(0),
      bx_(0),
      spillNumber_(0),
      nDataSenders_(0),
      fedReadoutMode_(sistrip::UNDEFINED_FED_READOUT_MODE),
      apvReadoutMode_(sistrip::UNDEFINED_APV_READOUT_MODE),
      apveAddress_(0),
      nApvsInSync_(0),
      nApvsOutOfSync_(0),
      nApvsErrors_(0),
      params_(5, 0) {
  ;
}

// -----------------------------------------------------------------------------
//
void SiStripEventSummary::commissioningInfo(const uint32_t* const buffer, const uint32_t& event) {
  // Set RunType
  uint16_t run = static_cast<uint16_t>(buffer[10] & 0xFFFF);
  runType_ = SiStripEnumsAndStrings::runType(run);

  // Set spill number
  spillNumber_ = buffer[0];

  // Set number of DataSenders
  nDataSenders_ = buffer[20];

  // Set FED readout mode
  if (buffer[15] == 0) {
    fedReadoutMode_ = sistrip::FED_SCOPE_MODE;
  } else if (buffer[15] == 1) {
    fedReadoutMode_ = sistrip::FED_VIRGIN_RAW;
  } else if (buffer[15] == 2) {
    fedReadoutMode_ = sistrip::FED_PROC_RAW;
  } else if (buffer[15] == 3) {
    fedReadoutMode_ = sistrip::FED_ZERO_SUPPR;
  } else if (buffer[15] == 4) {
    fedReadoutMode_ = sistrip::FED_ZERO_SUPPR_LITE;
  } else {
    fedReadoutMode_ = sistrip::UNKNOWN_FED_READOUT_MODE;
  }

  // Set hardware parameters
  if (runType_ == sistrip::CALIBRATION || runType_ == sistrip::CALIBRATION_DECO ||
      runType_ == sistrip::CALIBRATION_SCAN || runType_ == sistrip::CALIBRATION_SCAN_DECO ||
      runType_ == sistrip::APV_LATENCY) {
    params_[0] = buffer[11];  // latency
    params_[1] = buffer[12];  // cal_chan
    params_[2] = buffer[13];  // cal_sel
    params_[3] = buffer[15];  // isha
    params_[4] = buffer[16];  // vfs

  } else if (runType_ == sistrip::OPTO_SCAN) {
    params_[0] = buffer[11];  // opto gain
    params_[1] = buffer[12];  // opto bias

  } else if (runType_ == sistrip::APV_TIMING || runType_ == sistrip::FED_TIMING) {
    params_[0] = buffer[11];                     // pll coarse delay
    params_[1] = buffer[12];                     // pll fine delay
    params_[2] = buffer[13];                     // ttcrx delay
  } else if (runType_ == sistrip::FINE_DELAY ||  //@@ layer
             runType_ == sistrip::FINE_DELAY_PLL || runType_ == sistrip::FINE_DELAY_TTC) {
    params_[0] = buffer[11];  // pll coarse delay
    params_[1] = buffer[12];  // pll fine delay
    params_[2] = buffer[13];  // ttcrx delay
    params_[3] = buffer[14];  // layer (private format: DDSSLLLL, det, side, layer)

  } else if (runType_ == sistrip::FAST_CABLING) {
    params_[0] = buffer[11];  // bin number
    params_[1] = buffer[12];  // fec instance
    params_[2] = buffer[13];  // fec ip
    params_[3] = buffer[14];  // dcu hard id

  } else if (runType_ == sistrip::FED_CABLING || runType_ == sistrip::QUITE_FAST_CABLING) {
    if (runType_ == sistrip::QUITE_FAST_CABLING) {
      uint16_t ii = 0;
      bool found = false;
      while (!found && ii < 20) {
        uint32_t dcu = buffer[21 + 3 * ii];
        uint32_t key = buffer[21 + 3 * ii + 1];
        uint32_t evt = buffer[21 + 3 * ii + 2];
        if (evt == event) {
          params_[0] = key;  // device id
          params_[1] = 0;    // process id
          params_[2] = 0;    // process ip
          params_[3] = dcu;  // dcu hard id
          found = true;
        }
        ii++;
      }
      if (!found) {
        if (edm::isDebugEnabled()) {
          std::stringstream ss;
          ss << "[SiStripEventSummary::" << __func__ << "]"
             << " Did not find DeviceId/DCUid for event " << event << "!";
          edm::LogWarning(mlDigis_) << ss.str();
        }
        params_[0] = 0;
        params_[1] = 0;
        params_[2] = 0;
        params_[3] = 0;
      } else {
        if (edm::isDebugEnabled()) {
          std::stringstream ss;
          ss << "[SiStripEventSummary::" << __func__ << "]"
             << " Found DeviceId/DCUid for event " << event << ": 0x" << std::hex << std::setw(8) << std::setfill('0')
             << params_[0] << std::dec << "/0x" << std::hex << std::setw(8) << std::setfill('0') << params_[3]
             << std::dec;
          LogTrace(mlDigis_) << ss.str();
        }
      }

    } else {
      params_[0] = buffer[11];  // device id
      params_[1] = buffer[12];  // process id
      params_[2] = buffer[13];  // process ip
      params_[3] = buffer[14];  // dcu hard id
    }

  } else if (runType_ == sistrip::VPSP_SCAN) {
    params_[0] = buffer[11];  // vpsp value
    params_[1] = buffer[12];  // ccu channel

  } else if (runType_ == sistrip::DAQ_SCOPE_MODE) {
    // nothing interesting!

  } else if (runType_ == sistrip::PHYSICS || runType_ == sistrip::PHYSICS_ZS || runType_ == sistrip::PEDESTALS) {
    //@@ do anything?...

  } else {
    if (edm::isDebugEnabled()) {
      edm::LogWarning(mlDigis_) << "[SiStripEventSummary::" << __func__ << "]"
                                << " Unexpected commissioning task: " << runType_;
    }
  }
}

// -----------------------------------------------------------------------------
//

// -----------------------------------------------------------------------------
//
void SiStripEventSummary::commissioningInfo(const uint32_t& daq1, const uint32_t& daq2) {
  // Extract if commissioning info are valid or not
  uint16_t temp = static_cast<uint16_t>((daq1 >> 8) & 0x3);
  if (temp == uint16_t(1)) {
    valid_ = true;
  } else if (temp == uint16_t(2)) {
    valid_ = false;
  } else if (temp == uint16_t(3) && daq1 == sistrip::invalid32_) {
    if (edm::isDebugEnabled()) {
      edm::LogWarning(mlDigis_) << "[SiStripEventSummary::" << __func__ << "]"
                                << " DAQ register contents set to invalid: 0x" << std::hex << std::setw(8)
                                << std::setfill('0') << daq1 << std::dec;
    }
    valid_ = false;
  } else {
    if (edm::isDebugEnabled()) {
      edm::LogWarning(mlDigis_) << "[SiStripEventSummary::" << __func__ << "]"
                                << " Unexpected bit pattern set in DAQ1: 0x" << std::hex << std::setw(8)
                                << std::setfill('0') << daq1 << std::dec;
    }
    valid_ = false;
  }

  // Set RunType
  uint16_t run = static_cast<uint16_t>(daq1 & 0xFF);
  runType_ = SiStripEnumsAndStrings::runType(run);

  // Set hardware parameters
  if (runType_ == sistrip::PHYSICS) {
  } else if (runType_ == sistrip::PHYSICS_ZS) {
  } else if (runType_ == sistrip::PEDESTALS) {
  } else if (runType_ == sistrip::DAQ_SCOPE_MODE) {
  } else if (runType_ == sistrip::CALIBRATION or runType_ == sistrip::CALIBRATION_DECO) {
    params_[0] = (daq2 >> 8) & 0xFF;  // latency
    params_[1] = (daq2 >> 4) & 0x0F;  // cal_chan
    params_[2] = (daq2 >> 0) & 0x0F;  // cal_sel
  } else if (runType_ == sistrip::CALIBRATION_SCAN or runType_ == sistrip::CALIBRATION_SCAN_DECO) {
    params_[0] = (daq2 >> 8) & 0xFF;   // latency
    params_[1] = (daq2 >> 4) & 0x0F;   // cal_chan
    params_[2] = (daq2 >> 0) & 0x0F;   // cal_sel
    params_[3] = (daq2 >> 16) & 0xFF;  // isha
    params_[4] = (daq2 >> 24);         // vfs
  } else if (runType_ == sistrip::OPTO_SCAN) {
    params_[0] = (daq2 >> 8) & 0xFF;  // opto gain
    params_[1] = (daq2 >> 0) & 0xFF;  // opto bias
  } else if (runType_ == sistrip::APV_TIMING) {
    params_[1] = (daq2 >> 0) & 0xFF;  // pll fine delay
  } else if (runType_ == sistrip::APV_LATENCY) {
    params_[0] = (daq2 >> 0) & 0xFF;  // latency
  } else if (runType_ == sistrip::FINE_DELAY_PLL) {
  } else if (runType_ == sistrip::FINE_DELAY_TTC) {
  } else if (runType_ == sistrip::FINE_DELAY) {            //@@ layer
    params_[2] = (daq2 >> 0) & 0xFFFF;                     // ttcrx delay
    params_[0] = params_[2] / 25;                          // pll coarse delay
    params_[1] = uint32_t((params_[2] % 25) * 24. / 25.);  // pll fine delay
    params_[3] = (daq2 >> 0) & 0xFFFF0000;                 // layer (private format: DDSSLLLL (det, side, layer)
  } else if (runType_ == sistrip::FED_TIMING) {
    params_[1] = (daq2 >> 0) & 0xFF;  // pll fine delay
  } else if (runType_ == sistrip::VPSP_SCAN) {
    params_[0] = (daq2 >> 8) & 0xFF;  // vpsp value
    params_[1] = (daq2 >> 0) & 0xFF;  // ccu channel
  } else if (runType_ == sistrip::FED_CABLING) {
  } else if (runType_ == sistrip::QUITE_FAST_CABLING) {
  } else if (runType_ == sistrip::FAST_CABLING) {
    params_[0] = (daq2 >> 0) & 0xFF;  // key
  } else {
    if (edm::isDebugEnabled()) {
      edm::LogWarning(mlDigis_) << "[SiStripEventSummary::" << __func__ << "]"
                                << " Unexpected commissioning task: " << runType_;
    }
  }
}

// -----------------------------------------------------------------------------
//
void SiStripEventSummary::fedReadoutMode(const uint16_t& mode) {
  if (mode == 1) {
    fedReadoutMode_ = sistrip::FED_SCOPE_MODE;
  } else if (mode == 2) {
    fedReadoutMode_ = sistrip::FED_VIRGIN_RAW;
  } else if (mode == 6) {
    fedReadoutMode_ = sistrip::FED_PROC_RAW;
  } else if (mode == 10) {
    fedReadoutMode_ = sistrip::FED_ZERO_SUPPR;
  } else if (mode == 12) {
    fedReadoutMode_ = sistrip::FED_ZERO_SUPPR_LITE;
  } else {
    fedReadoutMode_ = sistrip::UNKNOWN_FED_READOUT_MODE;
  }
}

// -----------------------------------------------------------------------------
//
std::ostream& operator<<(std::ostream& os, const SiStripEventSummary& input) {
  return os << "[SiStripEventSummary::" << __func__ << "]" << std::endl
            << " isSet                : " << std::boolalpha << input.isSet() << std::noboolalpha << std::endl
            << " Trigger FED id       : " << input.triggerFed() << std::endl
            << " isValid              : " << std::boolalpha << input.valid() << std::noboolalpha << std::endl
            << " Run type             : " << SiStripEnumsAndStrings::runType(input.runType()) << std::endl
            << " Event number         : " << input.event() << std::endl
            << " Bunch crossing       : " << input.bx() << std::endl
            << " FED readout mode     : " << SiStripEnumsAndStrings::fedReadoutMode(input.fedReadoutMode()) << std::endl
            << " APV readout mode     : " << SiStripEnumsAndStrings::apvReadoutMode(input.apvReadoutMode()) << std::endl
            << " Commissioning params : " << input.params()[0] << ", " << input.params()[1] << ", " << input.params()[2]
            << ", " << input.params()[3] << std::endl;
}