Inheritance diagram for HTMonitor:

Public Types
typedef dqm::reco::DQMStore	DQMStore

typedef dqm::reco::MonitorElement	MonitorElement

Public Types inherited from DQMEDAnalyzer
typedef dqm::reco::DQMStore	DQMStore

typedef dqm::reco::MonitorElement	MonitorElement

Public Types inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
using	CacheTypes = CacheContexts< T... >

using	GlobalCache = typename CacheTypes::GlobalCache

using	HasAbility = AbilityChecker< T... >

using	InputProcessBlockCache = typename CacheTypes::InputProcessBlockCache

using	LuminosityBlockCache = typename CacheTypes::LuminosityBlockCache

using	LuminosityBlockContext = LuminosityBlockContextT< LuminosityBlockCache, RunCache, GlobalCache >

using	LuminosityBlockSummaryCache = typename CacheTypes::LuminosityBlockSummaryCache

using	RunCache = typename CacheTypes::RunCache

using	RunContext = RunContextT< RunCache, GlobalCache >

using	RunSummaryCache = typename CacheTypes::RunSummaryCache

Public Types inherited from TriggerDQMBase
typedef dqm::legacy::DQMStore	DQMStore

typedef dqm::legacy::MonitorElement	MonitorElement

Public Member Functions
	HTMonitor (const edm::ParameterSet &)

	~HTMonitor () override throw ()

Public Member Functions inherited from DQMEDAnalyzer
void	accumulate (edm::Event const &event, edm::EventSetup const &setup) final

void	beginLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final

void	beginRun (edm::Run const &run, edm::EventSetup const &setup) final

void	beginStream (edm::StreamID id) final

virtual void	dqmBeginRun (edm::Run const &, edm::EventSetup const &)

	DQMEDAnalyzer ()

void	endLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final

void	endRun (edm::Run const &run, edm::EventSetup const &setup) final

virtual bool	getCanSaveByLumi ()

Public Member Functions inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
	EDProducer ()=default

	EDProducer (const EDProducer &)=delete

bool	hasAbilityToProduceInBeginLumis () const final

bool	hasAbilityToProduceInBeginProcessBlocks () const final

bool	hasAbilityToProduceInBeginRuns () const final

bool	hasAbilityToProduceInEndLumis () const final

bool	hasAbilityToProduceInEndProcessBlocks () const final

bool	hasAbilityToProduceInEndRuns () const final

const EDProducer &	operator= (const EDProducer &)=delete

Public Member Functions inherited from TriggerDQMBase
void	bookME (DQMStore::IBooker &, ObjME &me, const std::string &histname, const std::string &histtitle, const uint nbins, const double xmin, const double xmax, const bool bookDen=true)

void	bookME (DQMStore::IBooker &, ObjME &me, const std::string &histname, const std::string &histtitle, const std::vector< double > &binningX, const bool bookDen=true)

void	bookME (DQMStore::IBooker &, ObjME &me, const std::string &histname, const std::string &histtitle, const uint nbinsX, const double xmin, const double xmax, const double ymin, const double ymax, const bool bookDen=true)

void	bookME (DQMStore::IBooker &, ObjME &me, const std::string &histname, const std::string &histtitle, const uint nbinsX, const double xmin, const double xmax, const uint nbinsY, const double ymin, const double ymax, const bool bookDen=true)

void	bookME (DQMStore::IBooker &, ObjME &me, const std::string &histname, const std::string &histtitle, const std::vector< double > &binningX, const std::vector< double > &binningY, const bool bookDen=true)

void	setMETitle (ObjME &me, const std::string &titleX, const std::string &titleY)

	TriggerDQMBase ()=default

virtual	~TriggerDQMBase ()=default

Static Public Member Functions
static void	fillDescriptions (edm::ConfigurationDescriptions &descriptions)

Static Public Member Functions inherited from DQMEDAnalyzer
static void	globalEndJob (DQMEDAnalyzerGlobalCache const *)

static void	globalEndLuminosityBlockProduce (edm::LuminosityBlock &lumi, edm::EventSetup const &setup, LuminosityBlockContext const *context)

static void	globalEndRunProduce (edm::Run &run, edm::EventSetup const &setup, RunContext const *context)

static std::unique_ptr< DQMEDAnalyzerGlobalCache >	initializeGlobalCache (edm::ParameterSet const &)

Static Public Member Functions inherited from TriggerDQMBase
static void	fillHistoLSPSetDescription (edm::ParameterSetDescription &pset)

static void	fillHistoPSetDescription (edm::ParameterSetDescription &pset)

static MEbinning	getHistoLSPSet (const edm::ParameterSet &pset)

static MEbinning	getHistoPSet (const edm::ParameterSet &pset)

Protected Member Functions
void	analyze (edm::Event const &iEvent, edm::EventSetup const &iSetup) override

void	bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override

Protected Member Functions inherited from DQMEDAnalyzer
uint64_t	meId () const

Private Attributes
std::unique_ptr< GenericTriggerEventFlag >	den_genTriggerEventFlag_

double	dEtaCut_

edm::InputTag	eleInputTag_

StringCutObjectSelector< reco::GsfElectron, true >	eleSelection_

edm::EDGetTokenT< reco::GsfElectronCollection >	eleToken_

const bool	enableFullMonitoring_

ObjME	etaj1ME_

ObjME	etaj2ME_

const std::string	folderName_

bool	hltPathsAreValid_

MEbinning	ht_binning_

std::vector< double >	ht_variable_binning_

ObjME	htVsLS_

edm::InputTag	jetInputTag_

ObjME	jetpt1ME_

ObjME	jetpt2ME_

std::vector< double >	jetptBinning_

StringCutObjectSelector< reco::Jet, true >	jetSelection_

StringCutObjectSelector< reco::Jet, true >	jetSelection_HT_

edm::EDGetTokenT< reco::JetView >	jetToken_

MEbinning	ls_binning_

edm::InputTag	metInputTag_

ObjME	METPhiME_

StringCutObjectSelector< reco::MET, true >	metSelection_

edm::EDGetTokenT< reco::PFMETCollection >	metToken_

edm::InputTag	muoInputTag_

StringCutObjectSelector< reco::Muon, true >	muoSelection_

edm::EDGetTokenT< reco::MuonCollection >	muoToken_

unsigned	nelectrons_

unsigned	njets_

ObjME	nJetsHTME_

ObjME	nJetsME_

unsigned	nmuons_

std::unique_ptr< GenericTriggerEventFlag >	num_genTriggerEventFlag_

ObjME	phij1ME_

ObjME	phij2ME_

ObjME	qME_variableBinning_

std::string	quantity_

const bool	requireValidHLTPaths_

edm::InputTag	vtxInputTag_

edm::EDGetTokenT< reco::VertexCollection >	vtxToken_

bool	warningWasPrinted_

Static Private Attributes
static constexpr MEbinning	eta_binning {N_ETA, -MAX_ETA, MAX_ETA}

static constexpr double	MAX_ETA = 5.0

static constexpr int	MAX_NJETS = 200

static constexpr int	MAX_NJETS_HT = 30

static constexpr double	MAXedge_PHI = 3.2

static constexpr int	MIN_NJETS = 0

static constexpr int	MIN_NJETS_HT = 0

static constexpr int	N_BIN_NJETS = 200

static constexpr int	N_BIN_NJETS_HT = 30

static constexpr int	N_ETA = 20

static constexpr int	Nbin_PHI = 64

static constexpr MEbinning	nJets_binning {N_BIN_NJETS, MIN_NJETS, MAX_NJETS}

static constexpr MEbinning	nJets_HT_binning {N_BIN_NJETS_HT, MIN_NJETS_HT, MAX_NJETS_HT}

static constexpr MEbinning	phi_binning_ {Nbin_PHI, -MAXedge_PHI, MAXedge_PHI}

Additional Inherited Members
Protected Attributes inherited from DQMEDAnalyzer
edm::EDPutTokenT< DQMToken >	lumiToken_

edm::EDPutTokenT< DQMToken >	runToken_

unsigned int	streamId_

Detailed Description

Definition at line 38 of file HTMonitor.cc.

Member Typedef Documentation

◆ DQMStore

typedef dqm::reco::DQMStore HTMonitor::DQMStore

Definition at line 41 of file HTMonitor.cc.

◆ MonitorElement

typedef dqm::reco::MonitorElement HTMonitor::MonitorElement

Definition at line 40 of file HTMonitor.cc.

Constructor & Destructor Documentation

◆ HTMonitor()

HTMonitor::HTMonitor ( const edm::ParameterSet & iConfig )

Definition at line 122 of file HTMonitor.cc.

     : folderName_(iConfig.getParameter<std::string>("FolderName")),
       requireValidHLTPaths_(iConfig.getParameter<bool>("requireValidHLTPaths")),
       hltPathsAreValid_(false),
       enableFullMonitoring_(iConfig.getParameter<bool>("enableFullMonitoring")),
       metInputTag_(iConfig.getParameter<edm::InputTag>("met")),
       jetInputTag_(iConfig.getParameter<edm::InputTag>("jets")),
       eleInputTag_(iConfig.getParameter<edm::InputTag>("electrons")),
       muoInputTag_(iConfig.getParameter<edm::InputTag>("muons")),
       vtxInputTag_(iConfig.getParameter<edm::InputTag>("vertices")),
       metToken_(consumes<reco::PFMETCollection>(metInputTag_)),
       jetToken_(mayConsume<reco::JetView>(jetInputTag_)),
       eleToken_(mayConsume<reco::GsfElectronCollection>(eleInputTag_)),
       muoToken_(mayConsume<reco::MuonCollection>(muoInputTag_)),
       vtxToken_(mayConsume<reco::VertexCollection>(vtxInputTag_)),
       ht_variable_binning_(
           iConfig.getParameter<edm::ParameterSet>("histoPSet").getParameter<std::vector<double> >("htBinning")),
       jetptBinning_(
           iConfig.getParameter<edm::ParameterSet>("histoPSet").getParameter<std::vector<double> >("jetptBinning")),
       ht_binning_(
           getHistoPSet(iConfig.getParameter<edm::ParameterSet>("histoPSet").getParameter<edm::ParameterSet>("htPSet"))),
       ls_binning_(
           getHistoPSet(iConfig.getParameter<edm::ParameterSet>("histoPSet").getParameter<edm::ParameterSet>("lsPSet"))),
       num_genTriggerEventFlag_(new GenericTriggerEventFlag(
           iConfig.getParameter<edm::ParameterSet>("numGenericTriggerEventPSet"), consumesCollector(), *this)),
       den_genTriggerEventFlag_(new GenericTriggerEventFlag(
           iConfig.getParameter<edm::ParameterSet>("denGenericTriggerEventPSet"), consumesCollector(), *this)),
       metSelection_(iConfig.getParameter<std::string>("metSelection")),
       jetSelection_(iConfig.getParameter<std::string>("jetSelection")),
       eleSelection_(iConfig.getParameter<std::string>("eleSelection")),
       muoSelection_(iConfig.getParameter<std::string>("muoSelection")),
       jetSelection_HT_(iConfig.getParameter<std::string>("jetSelection_HT")),
       njets_(iConfig.getParameter<unsigned>("njets")),
       nelectrons_(iConfig.getParameter<unsigned>("nelectrons")),
       nmuons_(iConfig.getParameter<unsigned>("nmuons")),
       dEtaCut_(iConfig.getParameter<double>("dEtaCut")),
       quantity_(iConfig.getParameter<std::string>("quantity")),
       warningWasPrinted_(false) {}

◆ ~HTMonitor()

HTMonitor::~HTMonitor	(	)
throw	(
	)

override

Definition at line 161 of file HTMonitor.cc.

References den_genTriggerEventFlag_, and num_genTriggerEventFlag_.

                               {
   if (num_genTriggerEventFlag_) {
     num_genTriggerEventFlag_.reset();
   }
   if (den_genTriggerEventFlag_) {
     den_genTriggerEventFlag_.reset();
   }
 }

Member Function Documentation

◆ analyze()

void HTMonitor::analyze	(	edm::Event const &	iEvent,
		edm::EventSetup const &	iSetup
	)

overrideprotectedvirtual

Reimplemented from DQMEDAnalyzer.

Definition at line 277 of file HTMonitor.cc.

References den_genTriggerEventFlag_, TriggerDQMBase::ObjME::denominator, dEtaCut_, MillePedeFileConverter_cfg::e, pwdgSkimBPark_cfi::electrons, eleInputTag_, eleSelection_, eleToken_, enableFullMonitoring_, etaj1ME_, etaj2ME_, dqm::impl::MonitorElement::Fill(), hltPathsAreValid_, htVsLS_, iEvent, edm::HandleBase::isValid(), dqmiolumiharvest::j, jetInputTag_, jetpt1ME_, jetpt2ME_, PDWG_EXODelayedJetMET_cff::jets, jetSelection_, jetSelection_HT_, jetToken_, edm::InputTag::label(), eostools::ls(), visualization-live-secondInstance_cfg::m, metInputTag_, RazorAnalyzer::metphi, METPhiME_, metSelection_, metToken_, muoInputTag_, PDWG_BPHSkim_cff::muons, muoSelection_, muoToken_, nelectrons_, njets_, nJetsHTME_, nJetsME_, nmuons_, num_genTriggerEventFlag_, TriggerDQMBase::ObjME::numerator, reco::LeafCandidate::phi(), phij1ME_, phij2ME_, qME_variableBinning_, quantity_, requireValidHLTPaths_, edm::View< T >::size(), findQualityFiles::v, extraflags_cff::vtx, vtxInputTag_, vtxToken_, and warningWasPrinted_.

                                                                            {
   // if valid HLT paths are required,
   // analyze event only if all paths are valid
   if (requireValidHLTPaths_ and (not hltPathsAreValid_)) {
     return;
   }
 
   // Filter out events if Trigger Filtering is requested
   if (den_genTriggerEventFlag_->on() && !den_genTriggerEventFlag_->accept(iEvent, iSetup))
     return;
 
   edm::Handle<reco::PFMETCollection> metHandle;
   iEvent.getByToken(metToken_, metHandle);
   if (not metHandle.isValid()) {
     if (not warningWasPrinted_) {
       edm::LogWarning("HTMonitor") << "skipping events because the collection " << metInputTag_.label().c_str()
                                    << " is not available";
       warningWasPrinted_ = true;
     }
     return;
   }
   reco::PFMET pfmet = metHandle->front();
   if (!metSelection_(pfmet))
     return;
 
   edm::Handle<reco::JetView> jetHandle;  //add a configurable jet collection & jet pt selection
   iEvent.getByToken(jetToken_, jetHandle);
   if (!jetHandle.isValid()) {
     if (not warningWasPrinted_) {
       edm::LogWarning("HTMonitor") << "skipping events because the collection " << jetInputTag_.label().c_str()
                                    << " is not available";
       warningWasPrinted_ = true;
     }
     return;
   }
   std::vector<reco::Jet> jets;
   if (jetHandle->size() < njets_)
     return;
   for (auto const& j : *jetHandle) {
     if (jetSelection_(j)) {
       jets.push_back(j);
     }
   }
 
   if (jets.size() < njets_)
     return;
 
   const float metphi = pfmet.phi();
   const int nJetsSel = jets.size();  //jetSelection: PT>0
   const float Pt_J1 = !jets.empty() ? jets[0].pt() : -10.0;
   const float Pt_J2 = jets.size() >= 2 ? jets[1].pt() : -10.0;
   const float Phi_J1 = !jets.empty() ? jets[0].phi() : -10.0;
   const float Phi_J2 = jets.size() >= 2 ? jets[1].phi() : -10.0;
   const float Eta_J1 = !jets.empty() ? jets[0].p4().eta() : -10.0;
   const float Eta_J2 = jets.size() >= 2 ? jets[1].p4().eta() : -10.0;
 
   std::vector<reco::GsfElectron> electrons;
   edm::Handle<reco::GsfElectronCollection> eleHandle;
   iEvent.getByToken(eleToken_, eleHandle);
   if (eleHandle.isValid()) {
     if (eleHandle->size() < nelectrons_)
       return;
     for (auto const& e : *eleHandle) {
       if (eleSelection_(e))
         electrons.push_back(e);
     }
     if (electrons.size() < nelectrons_)
       return;
   } else {
     if (not warningWasPrinted_) {
       if (eleInputTag_.label().empty())
         edm::LogWarning("HTMonitor") << "GsfElectronCollection not set";
       else
         edm::LogWarning("HTMonitor") << "skipping events because the collection " << eleInputTag_.label().c_str()
                                      << " is not available";
 
       warningWasPrinted_ = true;
     }
     if (!eleInputTag_.label().empty())
       return;
   }
 
   reco::Vertex vtx;
   edm::Handle<reco::VertexCollection> vtxHandle;
   iEvent.getByToken(vtxToken_, vtxHandle);
   if (vtxHandle.isValid()) {
     for (auto const& v : *vtxHandle) {
       bool isFake = v.isFake();
 
       if (!isFake) {
         vtx = v;
         break;
       }
     }
   } else {
     if (not warningWasPrinted_) {
       if (vtxInputTag_.label().empty())
         edm::LogWarning("HTMonitor") << "VertexCollection not set";
       else
         edm::LogWarning("HTMonitor") << "skipping events because the collection " << vtxInputTag_.label().c_str()
                                      << " is not available";
 
       warningWasPrinted_ = true;
     }
     if (!vtxInputTag_.label().empty())
       return;
   }
 
   std::vector<reco::Muon> muons;
   edm::Handle<reco::MuonCollection> muoHandle;
   iEvent.getByToken(muoToken_, muoHandle);
   if (muoHandle.isValid()) {
     if (muoHandle->size() < nmuons_)
       return;
     for (auto const& m : *muoHandle) {
       if (muoSelection_(m) && m.isGlobalMuon() && m.isPFMuon() && m.globalTrack()->normalizedChi2() < 10. &&
           m.globalTrack()->hitPattern().numberOfValidMuonHits() > 0 && m.numberOfMatchedStations() > 1 &&
           fabs(m.muonBestTrack()->dxy(vtx.position())) < 0.2 && fabs(m.muonBestTrack()->dz(vtx.position())) < 0.5 &&
           m.innerTrack()->hitPattern().numberOfValidPixelHits() > 0 &&
           m.innerTrack()->hitPattern().trackerLayersWithMeasurement() > 5)
         muons.push_back(m);
     }
     if (muons.size() < nmuons_)
       return;
   } else {
     if (not warningWasPrinted_) {
       if (muoInputTag_.label().empty())
         edm::LogWarning("HTMonitor") << "MuonCollection not set";
       else
         edm::LogWarning("HTMonitor") << "skipping events because the collection " << muoInputTag_.label().c_str()
                                      << " is not available";
 
       warningWasPrinted_ = true;
     }
     if (!muoInputTag_.label().empty())
       return;
   }
 
   // fill histograms
   if (quantity_ == "HT") {
     float ht = 0.0;
     int nJets_HT = 0;
     for (auto const& j : *jetHandle) {
       if (jetSelection_HT_(j)) {
         ht += j.pt();
         nJets_HT = nJets_HT + 1;  //===== jetSelection HT: Pt>30 & eta<2.5
       }
     }
 
     // filling histograms (denominator)
     qME_variableBinning_.denominator->Fill(ht);
 
     int ls = iEvent.id().luminosityBlock();
     htVsLS_.denominator->Fill(ls, ht);
 
     if (enableFullMonitoring_) {  //===check the flag
 
       METPhiME_.denominator->Fill(metphi);
       jetpt1ME_.denominator->Fill(Pt_J1);
       jetpt2ME_.denominator->Fill(Pt_J2);
       phij1ME_.denominator->Fill(Phi_J1);
       phij2ME_.denominator->Fill(Phi_J2);
       etaj1ME_.denominator->Fill(Eta_J1);
       etaj2ME_.denominator->Fill(Eta_J2);
       nJetsME_.denominator->Fill(nJetsSel);
       nJetsHTME_.denominator->Fill(nJets_HT);
     }
 
     // applying selection for numerator
     if (num_genTriggerEventFlag_->on() && !num_genTriggerEventFlag_->accept(iEvent, iSetup))
       return;
 
     // filling histograms (num_genTriggerEventFlag_)
     qME_variableBinning_.numerator->Fill(ht);
 
     htVsLS_.numerator->Fill(ls, ht);
 
     if (enableFullMonitoring_) {  //===check the flag
       METPhiME_.numerator->Fill(metphi);
       jetpt1ME_.numerator->Fill(Pt_J1);
       jetpt2ME_.numerator->Fill(Pt_J2);
       phij1ME_.numerator->Fill(Phi_J1);
       phij2ME_.numerator->Fill(Phi_J2);
       etaj1ME_.numerator->Fill(Eta_J1);
       etaj2ME_.numerator->Fill(Eta_J2);
       nJetsME_.numerator->Fill(nJetsSel);
       nJetsHTME_.numerator->Fill(nJets_HT);
     }
   }  //end if --  HT
   else if (quantity_ == "Mjj") {
     if (jets.size() < 2)
       return;
 
     // deltaEta cut
     if (fabs(jets[0].p4().Eta() - jets[1].p4().Eta()) >= dEtaCut_)
       return;
     float mjj = (jets[0].p4() + jets[1].p4()).M();
 
     qME_variableBinning_.denominator->Fill(mjj);
 
     // applying selection for numerator
     if (num_genTriggerEventFlag_->on() && !num_genTriggerEventFlag_->accept(iEvent, iSetup))
       return;
 
     qME_variableBinning_.numerator->Fill(mjj);
   }  // end if -- Mjj
   else if (quantity_ == "softdrop") {
     if (jets.size() < 2)
       return;
 
     // deltaEta cut
     if (fabs(jets[0].p4().Eta() - jets[1].p4().Eta()) >= dEtaCut_)
       return;
 
     float softdrop = jets[0].p4().M();
 
     qME_variableBinning_.denominator->Fill(softdrop);
 
     // applying selection for numerator
     if (num_genTriggerEventFlag_->on() && !num_genTriggerEventFlag_->accept(iEvent, iSetup))
       return;
 
     qME_variableBinning_.numerator->Fill(softdrop);
   }  //end  if -- softdrop
 }

◆ bookHistograms()

void HTMonitor::bookHistograms	(	DQMStore::IBooker &	ibooker,
		edm::Run const &	iRun,
		edm::EventSetup const &	iSetup
	)

overrideprotectedvirtual

Implements DQMEDAnalyzer.

Definition at line 170 of file HTMonitor.cc.

References TriggerDQMBase::bookME(), den_genTriggerEventFlag_, enableFullMonitoring_, eta_binning, etaj1ME_, etaj2ME_, folderName_, hltPathsAreValid_, ht_binning_, ht_variable_binning_, htVsLS_, jetpt1ME_, jetpt2ME_, jetptBinning_, ls_binning_, METPhiME_, TriggerDQMBase::MEbinning::nbins, nJets_binning, nJets_HT_binning, nJetsHTME_, nJetsME_, num_genTriggerEventFlag_, phi_binning_, phij1ME_, phij2ME_, qME_variableBinning_, quantity_, requireValidHLTPaths_, dqm::implementation::NavigatorBase::setCurrentFolder(), TriggerDQMBase::setMETitle(), AlCaHLTBitMon_QueryRunRegistry::string, TriggerDQMBase::MEbinning::xmax, and TriggerDQMBase::MEbinning::xmin.

                                                                                                         {
   // Initialize the GenericTriggerEventFlag
   if (num_genTriggerEventFlag_ && num_genTriggerEventFlag_->on()) {
     num_genTriggerEventFlag_->initRun(iRun, iSetup);
   }
   if (den_genTriggerEventFlag_ && den_genTriggerEventFlag_->on()) {
     den_genTriggerEventFlag_->initRun(iRun, iSetup);
   }
 
   // check if every HLT path specified in numerator and denominator has a valid match in the HLT Menu
   hltPathsAreValid_ = (num_genTriggerEventFlag_ && den_genTriggerEventFlag_ && num_genTriggerEventFlag_->on() &&
                        den_genTriggerEventFlag_->on() && num_genTriggerEventFlag_->allHLTPathsAreValid() &&
                        den_genTriggerEventFlag_->allHLTPathsAreValid());
 
   // if valid HLT paths are required,
   // create DQM outputs only if all paths are valid
   if (requireValidHLTPaths_ and (not hltPathsAreValid_)) {
     return;
   }
 
   std::string histname, histtitle;
 
   std::string currentFolder = folderName_;
   ibooker.setCurrentFolder(currentFolder);
   if (quantity_ == "HT") {
     histname = "ht_variable";
     histtitle = "HT";
     bookME(ibooker, qME_variableBinning_, histname, histtitle, ht_variable_binning_);
     setMETitle(qME_variableBinning_, "HT [GeV]", "events / [GeV]");
 
     histname = "htVsLS";
     histtitle = "HT vs LS";
     bookME(ibooker,
            htVsLS_,
            histname,
            histtitle,
            ls_binning_.nbins,
            ls_binning_.xmin,
            ls_binning_.xmax,
            ht_binning_.xmin,
            ht_binning_.xmax);
     setMETitle(htVsLS_, "LS", "HT [GeV]");
 
     if (!enableFullMonitoring_) {
       return;
     }
 
     histname = "METPhi";
     histtitle = "METPhi";
     bookME(ibooker, METPhiME_, histname, histtitle, phi_binning_.nbins, phi_binning_.xmin, phi_binning_.xmax);
     setMETitle(METPhiME_, "MET phi", "events / 0.1 rad");
 
     histname = "jetPt1";
     histtitle = "leading Jet Pt";
     bookME(ibooker, jetpt1ME_, histname, histtitle, jetptBinning_);
     setMETitle(jetpt1ME_, "Pt_1 [GeV]", "events");
 
     histname = "jetPt2";
     histtitle = "second leading Jet Pt";
     bookME(ibooker, jetpt2ME_, histname, histtitle, jetptBinning_);
     setMETitle(jetpt2ME_, "Pt_2 [GeV]", "events");
 
     histname = "jetEta1";
     histtitle = "leading Jet eta";
     bookME(ibooker, etaj1ME_, histname, histtitle, eta_binning.nbins, eta_binning.xmin, eta_binning.xmax);
     setMETitle(etaj1ME_, "Jet_1 #eta", "events");
 
     histname = "jetEta2";
     histtitle = "subleading Jet eta";
     bookME(ibooker, etaj2ME_, histname, histtitle, eta_binning.nbins, eta_binning.xmin, eta_binning.xmax);
     setMETitle(etaj2ME_, "Jet_2 #eta", "events");
 
     histname = "jetPhi1";
     histtitle = "leading Jet phi";
     bookME(ibooker, phij1ME_, histname, histtitle, phi_binning_.nbins, phi_binning_.xmin, phi_binning_.xmax);
     setMETitle(phij1ME_, "Jet_1 #phi", "events / 0.1 rad");
 
     histname = "jetPhi2";
     histtitle = "subleading Jet phi";
     bookME(ibooker, phij2ME_, histname, histtitle, phi_binning_.nbins, phi_binning_.xmin, phi_binning_.xmax);
     setMETitle(phij2ME_, "Jet_2 #phi", "events / 0.1 rad");
 
     histname = "nJets";
     histtitle = "number of Jets";
     bookME(ibooker, nJetsME_, histname, histtitle, nJets_binning.nbins, nJets_binning.xmin, nJets_binning.xmax);
     setMETitle(nJetsME_, "number of Jets", "events");
 
     histname = "nJetsHT";
     histtitle = "number of Jets HT";
     bookME(
         ibooker, nJetsHTME_, histname, histtitle, nJets_HT_binning.nbins, nJets_HT_binning.xmin, nJets_HT_binning.xmax);
     setMETitle(nJetsHTME_, "number of Jets HT", "events");
   }  //end if --  HT quantity
   else if (quantity_ == "Mjj") {
     histname = "mjj_variable";
     histtitle = "Mjj";
     bookME(ibooker, qME_variableBinning_, histname, histtitle, ht_variable_binning_);
     setMETitle(qME_variableBinning_, "Mjj [GeV]", "events / [GeV]");
   }  //end if -- Mjj quantity
   else if (quantity_ == "softdrop") {
     histname = "softdrop_variable";
     histtitle = "softdropmass";
     bookME(ibooker, qME_variableBinning_, histname, histtitle, ht_variable_binning_);
     setMETitle(qME_variableBinning_, "leading jet softdropmass [GeV]", "events / [GeV]");
   }  //end if -- softdrop quantity
 }

◆ fillDescriptions()

void HTMonitor::fillDescriptions ( edm::ConfigurationDescriptions & descriptions )

static

Definition at line 503 of file HTMonitor.cc.

References edm::ConfigurationDescriptions::add(), trigObjTnPSource_cfi::bins, submitPVResolutionJobs::desc, TriggerDQMBase::fillHistoLSPSetDescription(), TriggerDQMBase::fillHistoPSetDescription(), GenericTriggerEventFlag::fillPSetDescription(), SiStripSourceConfigTier0_cff::genericTriggerEventPSet, V0Monitor_cff::histoPSet, B2GMonitoring_cff::htPSet, ProducerED_cfi::InputTag, V0Monitor_cfi::lsPSet, and AlCaHLTBitMon_QueryRunRegistry::string.

                                                                            {
   edm::ParameterSetDescription desc;
   desc.add<std::string>("FolderName", "HLT/HT");
   desc.add<bool>("requireValidHLTPaths", true);
   desc.add<bool>("enableFullMonitoring", false);
   desc.add<edm::InputTag>("met", edm::InputTag("pfMet"));
   desc.add<edm::InputTag>("jets", edm::InputTag("ak4PFJetsCHS"));
   desc.add<edm::InputTag>("electrons", edm::InputTag("gedGsfElectrons"));
   desc.add<edm::InputTag>("muons", edm::InputTag("muons"));
   desc.add<edm::InputTag>("vertices", edm::InputTag("offlinePrimaryVertices"));
   desc.add<std::string>("metSelection", "pt > 0");
   desc.add<std::string>("jetSelection", "pt > 0");
   desc.add<std::string>("eleSelection", "pt > 0");
   desc.add<std::string>("muoSelection", "pt > 0");
   desc.add<std::string>("jetSelection_HT", "pt > 30 && eta < 2.5");
   desc.add<unsigned>("njets", 0);
   desc.add<unsigned>("nelectrons", 0);
   desc.add<unsigned>("nmuons", 0);
   desc.add<double>("dEtaCut", 1.3);
 
   edm::ParameterSetDescription genericTriggerEventPSet;
   GenericTriggerEventFlag::fillPSetDescription(genericTriggerEventPSet);
 
   desc.add<edm::ParameterSetDescription>("numGenericTriggerEventPSet", genericTriggerEventPSet);
   desc.add<edm::ParameterSetDescription>("denGenericTriggerEventPSet", genericTriggerEventPSet);
 
   edm::ParameterSetDescription histoPSet;
   edm::ParameterSetDescription htPSet;
   fillHistoPSetDescription(htPSet);
   histoPSet.add<edm::ParameterSetDescription>("htPSet", htPSet);
   std::vector<double> bins = {0.,   20.,  40.,   60.,   80.,   90.,   100.,  110.,  120.,  130.,  140.,
                               150., 160., 170.,  180.,  190.,  200.,  220.,  240.,  260.,  280.,  300.,
                               350., 400., 450.,  500.,  550.,  600.,  650.,  700.,  750.,  800.,  850.,
                               900., 950., 1000., 1050., 1100., 1200., 1300., 1400., 1500., 2000., 2500.};
   histoPSet.add<std::vector<double> >("htBinning", bins);
   std::vector<double> bins_2 = {
       0.,   20.,  40.,  60.,  80.,  90.,  100., 110., 120., 130., 140., 150., 160.,
       170., 180., 190., 200., 220., 240., 260., 280., 300., 350., 400., 450., 1000.};  // Jet pT Binning
   histoPSet.add<std::vector<double> >("jetptBinning", bins_2);
   edm::ParameterSetDescription lsPSet;
   fillHistoLSPSetDescription(lsPSet);
   histoPSet.add<edm::ParameterSetDescription>("lsPSet", lsPSet);
 
   desc.add<edm::ParameterSetDescription>("histoPSet", histoPSet);
 
   desc.add<std::string>("quantity", "HT");
 
   descriptions.add("htMonitoring", desc);
 }

Member Data Documentation

◆ den_genTriggerEventFlag_

std::unique_ptr<GenericTriggerEventFlag> HTMonitor::den_genTriggerEventFlag_

private

Definition at line 88 of file HTMonitor.cc.

Referenced by analyze(), bookHistograms(), and ~HTMonitor().

◆ dEtaCut_

double HTMonitor::dEtaCut_

private

Definition at line 98 of file HTMonitor.cc.

Referenced by analyze().

◆ eleInputTag_

edm::InputTag HTMonitor::eleInputTag_

private

Definition at line 60 of file HTMonitor.cc.

Referenced by analyze().

◆ eleSelection_

StringCutObjectSelector<reco::GsfElectron, true> HTMonitor::eleSelection_

private

Definition at line 92 of file HTMonitor.cc.

Referenced by analyze().

◆ eleToken_

edm::EDGetTokenT<reco::GsfElectronCollection> HTMonitor::eleToken_

private

Definition at line 66 of file HTMonitor.cc.

Referenced by analyze().

◆ enableFullMonitoring_

const bool HTMonitor::enableFullMonitoring_

private

Definition at line 56 of file HTMonitor.cc.

Referenced by analyze(), and bookHistograms().

◆ eta_binning

constexpr MEbinning HTMonitor::eta_binning {N_ETA, -MAX_ETA, MAX_ETA}

staticprivate

Definition at line 106 of file HTMonitor.cc.

Referenced by bookHistograms().

◆ etaj1ME_

ObjME HTMonitor::etaj1ME_

private

Definition at line 82 of file HTMonitor.cc.

Referenced by analyze(), and bookHistograms().

◆ etaj2ME_

ObjME HTMonitor::etaj2ME_

private

Definition at line 83 of file HTMonitor.cc.

Referenced by analyze(), and bookHistograms().

◆ folderName_

const std::string HTMonitor::folderName_

private

Definition at line 52 of file HTMonitor.cc.

Referenced by bookHistograms().

◆ hltPathsAreValid_

bool HTMonitor::hltPathsAreValid_

private

Definition at line 55 of file HTMonitor.cc.

Referenced by analyze(), and bookHistograms().

◆ ht_binning_

MEbinning HTMonitor::ht_binning_

private

Definition at line 72 of file HTMonitor.cc.

Referenced by bookHistograms().

◆ ht_variable_binning_

std::vector<double> HTMonitor::ht_variable_binning_

private

Definition at line 70 of file HTMonitor.cc.

Referenced by bookHistograms().

◆ htVsLS_

ObjME HTMonitor::htVsLS_

private

Definition at line 76 of file HTMonitor.cc.

Referenced by analyze(), and bookHistograms().

◆ jetInputTag_

edm::InputTag HTMonitor::jetInputTag_

private

Definition at line 59 of file HTMonitor.cc.

Referenced by analyze().

◆ jetpt1ME_

ObjME HTMonitor::jetpt1ME_

private

Definition at line 78 of file HTMonitor.cc.

Referenced by analyze(), and bookHistograms().

◆ jetpt2ME_

ObjME HTMonitor::jetpt2ME_

private

Definition at line 79 of file HTMonitor.cc.

Referenced by analyze(), and bookHistograms().

◆ jetptBinning_

std::vector<double> HTMonitor::jetptBinning_

private

Definition at line 71 of file HTMonitor.cc.

Referenced by bookHistograms().

◆ jetSelection_

StringCutObjectSelector<reco::Jet, true> HTMonitor::jetSelection_

private

Definition at line 91 of file HTMonitor.cc.

Referenced by analyze().

◆ jetSelection_HT_

StringCutObjectSelector<reco::Jet, true> HTMonitor::jetSelection_HT_

private

Definition at line 94 of file HTMonitor.cc.

Referenced by analyze().

◆ jetToken_

edm::EDGetTokenT<reco::JetView> HTMonitor::jetToken_

private

Definition at line 65 of file HTMonitor.cc.

Referenced by analyze().

◆ ls_binning_

MEbinning HTMonitor::ls_binning_

private

Definition at line 73 of file HTMonitor.cc.

Referenced by bookHistograms().

◆ MAX_ETA

constexpr double HTMonitor::MAX_ETA = 5.0

staticprivate

Definition at line 104 of file HTMonitor.cc.

◆ MAX_NJETS

constexpr int HTMonitor::MAX_NJETS = 200

staticprivate

Definition at line 114 of file HTMonitor.cc.

◆ MAX_NJETS_HT

constexpr int HTMonitor::MAX_NJETS_HT = 30

staticprivate

Definition at line 109 of file HTMonitor.cc.

◆ MAXedge_PHI

constexpr double HTMonitor::MAXedge_PHI = 3.2

staticprivate

Definition at line 100 of file HTMonitor.cc.

◆ metInputTag_

edm::InputTag HTMonitor::metInputTag_

private

Definition at line 58 of file HTMonitor.cc.

Referenced by analyze().

◆ METPhiME_

ObjME HTMonitor::METPhiME_

private

Definition at line 77 of file HTMonitor.cc.

Referenced by analyze(), and bookHistograms().

◆ metSelection_

StringCutObjectSelector<reco::MET, true> HTMonitor::metSelection_

private

Definition at line 90 of file HTMonitor.cc.

Referenced by analyze().

◆ metToken_

edm::EDGetTokenT<reco::PFMETCollection> HTMonitor::metToken_

private

Definition at line 64 of file HTMonitor.cc.

Referenced by analyze().

◆ MIN_NJETS

constexpr int HTMonitor::MIN_NJETS = 0

staticprivate

Definition at line 113 of file HTMonitor.cc.

◆ MIN_NJETS_HT

constexpr int HTMonitor::MIN_NJETS_HT = 0

staticprivate

Definition at line 108 of file HTMonitor.cc.

◆ muoInputTag_

edm::InputTag HTMonitor::muoInputTag_

private

Definition at line 61 of file HTMonitor.cc.

Referenced by analyze().

◆ muoSelection_

StringCutObjectSelector<reco::Muon, true> HTMonitor::muoSelection_

private

Definition at line 93 of file HTMonitor.cc.

Referenced by analyze().

◆ muoToken_

edm::EDGetTokenT<reco::MuonCollection> HTMonitor::muoToken_

private

Definition at line 67 of file HTMonitor.cc.

Referenced by analyze().

◆ N_BIN_NJETS

constexpr int HTMonitor::N_BIN_NJETS = 200

staticprivate

Definition at line 115 of file HTMonitor.cc.

◆ N_BIN_NJETS_HT

constexpr int HTMonitor::N_BIN_NJETS_HT = 30

staticprivate

Definition at line 110 of file HTMonitor.cc.

◆ N_ETA

constexpr int HTMonitor::N_ETA = 20

staticprivate

Definition at line 105 of file HTMonitor.cc.

◆ Nbin_PHI

constexpr int HTMonitor::Nbin_PHI = 64

staticprivate

Definition at line 101 of file HTMonitor.cc.

◆ nelectrons_

unsigned HTMonitor::nelectrons_

private

Definition at line 96 of file HTMonitor.cc.

Referenced by analyze().

◆ njets_

unsigned HTMonitor::njets_

private

Definition at line 95 of file HTMonitor.cc.

Referenced by analyze().

◆ nJets_binning

constexpr MEbinning HTMonitor::nJets_binning {N_BIN_NJETS, MIN_NJETS, MAX_NJETS}

staticprivate

Definition at line 116 of file HTMonitor.cc.

Referenced by bookHistograms().

◆ nJets_HT_binning

constexpr MEbinning HTMonitor::nJets_HT_binning {N_BIN_NJETS_HT, MIN_NJETS_HT, MAX_NJETS_HT}

staticprivate

Definition at line 111 of file HTMonitor.cc.

Referenced by bookHistograms().

◆ nJetsHTME_

ObjME HTMonitor::nJetsHTME_

private

Definition at line 85 of file HTMonitor.cc.

Referenced by analyze(), and bookHistograms().

◆ nJetsME_

ObjME HTMonitor::nJetsME_

private

Definition at line 84 of file HTMonitor.cc.

Referenced by analyze(), and bookHistograms().

◆ nmuons_

unsigned HTMonitor::nmuons_

private

Definition at line 97 of file HTMonitor.cc.

Referenced by analyze().

◆ num_genTriggerEventFlag_

std::unique_ptr<GenericTriggerEventFlag> HTMonitor::num_genTriggerEventFlag_

private

Definition at line 87 of file HTMonitor.cc.

Referenced by analyze(), bookHistograms(), and ~HTMonitor().

◆ phi_binning_

constexpr MEbinning HTMonitor::phi_binning_ {Nbin_PHI, -MAXedge_PHI, MAXedge_PHI}

staticprivate

Definition at line 102 of file HTMonitor.cc.

Referenced by bookHistograms().

◆ phij1ME_

ObjME HTMonitor::phij1ME_

private

Definition at line 80 of file HTMonitor.cc.

Referenced by analyze(), and bookHistograms().

◆ phij2ME_

ObjME HTMonitor::phij2ME_

private

Definition at line 81 of file HTMonitor.cc.

Referenced by analyze(), and bookHistograms().

◆ qME_variableBinning_

ObjME HTMonitor::qME_variableBinning_

private

Definition at line 75 of file HTMonitor.cc.

Referenced by analyze(), and bookHistograms().

◆ quantity_

std::string HTMonitor::quantity_

private

Definition at line 118 of file HTMonitor.cc.

Referenced by analyze(), and bookHistograms().

◆ requireValidHLTPaths_

const bool HTMonitor::requireValidHLTPaths_

private

Definition at line 54 of file HTMonitor.cc.

Referenced by analyze(), and bookHistograms().

◆ vtxInputTag_

edm::InputTag HTMonitor::vtxInputTag_

private

Definition at line 62 of file HTMonitor.cc.

Referenced by analyze().

◆ vtxToken_

edm::EDGetTokenT<reco::VertexCollection> HTMonitor::vtxToken_

private

Definition at line 68 of file HTMonitor.cc.

Referenced by analyze().

◆ warningWasPrinted_

bool HTMonitor::warningWasPrinted_

private

Definition at line 119 of file HTMonitor.cc.

Referenced by analyze().

Public Types

Public Member Functions

Static Public Member Functions

Protected Member Functions

Private Attributes

Static Private Attributes

Additional Inherited Members

Detailed Description

Member Typedef Documentation

◆ DQMStore

◆ MonitorElement

Constructor & Destructor Documentation

◆ HTMonitor()

◆ ~HTMonitor()

Member Function Documentation

◆ analyze()

◆ bookHistograms()

◆ fillDescriptions()

Member Data Documentation

◆ den_genTriggerEventFlag_

◆ dEtaCut_

◆ eleInputTag_

◆ eleSelection_

◆ eleToken_

◆ enableFullMonitoring_

◆ eta_binning

◆ etaj1ME_

◆ etaj2ME_

◆ folderName_

◆ hltPathsAreValid_

◆ ht_binning_

◆ ht_variable_binning_

◆ htVsLS_

◆ jetInputTag_

◆ jetpt1ME_

◆ jetpt2ME_

◆ jetptBinning_

◆ jetSelection_

◆ jetSelection_HT_

◆ jetToken_

◆ ls_binning_

◆ MAX_ETA

◆ MAX_NJETS

◆ MAX_NJETS_HT

◆ MAXedge_PHI

◆ metInputTag_

◆ METPhiME_

◆ metSelection_

◆ metToken_

◆ MIN_NJETS

◆ MIN_NJETS_HT

◆ muoInputTag_

◆ muoSelection_

◆ muoToken_

◆ N_BIN_NJETS

◆ N_BIN_NJETS_HT

◆ N_ETA

◆ Nbin_PHI

◆ nelectrons_

◆ njets_

◆ nJets_binning

◆ nJets_HT_binning

◆ nJetsHTME_

◆ nJetsME_

◆ nmuons_

◆ num_genTriggerEventFlag_

◆ phi_binning_

◆ phij1ME_

◆ phij2ME_

◆ qME_variableBinning_

◆ quantity_

◆ requireValidHLTPaths_

◆ vtxInputTag_

◆ vtxToken_

◆ warningWasPrinted_