BrokenLine.h

Go to the documentation of this file.

#ifndef RecoPixelVertexing_PixelTrackFitting_interface_BrokenLine_h
#define RecoPixelVertexing_PixelTrackFitting_interface_BrokenLine_h

#include <Eigen/Eigenvalues>

#include "RecoPixelVertexing/PixelTrackFitting/interface/FitUtils.h"

namespace brokenline {


  using karimaki_circle_fit = riemannFit::CircleFit;

  template <int n>
  struct PreparedBrokenLineData {
    int qCharge;                          
    riemannFit::Matrix2xNd<n> radii;      
    riemannFit::VectorNd<n> sTransverse;  
                                          //   starting from the pre-fitted closest approach
    riemannFit::VectorNd<n> sTotal;       
    riemannFit::VectorNd<n> zInSZplane;   
    riemannFit::VectorNd<n> varBeta;      
  };

  __host__ __device__ inline double multScatt(
      const double& length, const double bField, const double radius, int layer, double slope) {
    // limit R to 20GeV...
    auto pt2 = std::min(20., bField * radius);
    pt2 *= pt2;
    constexpr double inv_X0 = 0.06 / 16.;  
    //if(Layer==1) XXI_0=0.06/16.;
    // else XXI_0=0.06/16.;
    //XX_0*=1;

    constexpr double geometry_factor = 0.7;
    constexpr double fact = geometry_factor * riemannFit::sqr(13.6 / 1000.);
    return fact / (pt2 * (1. + riemannFit::sqr(slope))) * (std::abs(length) * inv_X0) *
           riemannFit::sqr(1. + 0.038 * log(std::abs(length) * inv_X0));
  }

  __host__ __device__ inline riemannFit::Matrix2d rotationMatrix(double slope) {
    riemannFit::Matrix2d rot;
    rot(0, 0) = 1. / sqrt(1. + riemannFit::sqr(slope));
    rot(0, 1) = slope * rot(0, 0);
    rot(1, 0) = -rot(0, 1);
    rot(1, 1) = rot(0, 0);
    return rot;
  }

  __host__ __device__ inline void translateKarimaki(karimaki_circle_fit& circle,
                                                    double x0,
                                                    double y0,
                                                    riemannFit::Matrix3d& jacobian) {
    // Avoid multiple access to the circle.par vector.
    using scalar = std::remove_reference<decltype(circle.par(0))>::type;
    scalar phi = circle.par(0);
    scalar dee = circle.par(1);
    scalar rho = circle.par(2);

    // Avoid repeated trig. computations
    scalar sinPhi = sin(phi);
    scalar cosPhi = cos(phi);

    // Intermediate computations for the circle parameters
    scalar deltaPara = x0 * cosPhi + y0 * sinPhi;
    scalar deltaOrth = x0 * sinPhi - y0 * cosPhi + dee;
    scalar tempSmallU = 1 + rho * dee;
    scalar tempC = -rho * y0 + tempSmallU * cosPhi;
    scalar tempB = rho * x0 + tempSmallU * sinPhi;
    scalar tempA = 2. * deltaOrth + rho * (riemannFit::sqr(deltaOrth) + riemannFit::sqr(deltaPara));
    scalar tempU = sqrt(1. + rho * tempA);

    // Intermediate computations for the error matrix transform
    scalar xi = 1. / (riemannFit::sqr(tempB) + riemannFit::sqr(tempC));
    scalar tempV = 1. + rho * deltaOrth;
    scalar lambda = (0.5 * tempA) / (riemannFit::sqr(1. + tempU) * tempU);
    scalar mu = 1. / (tempU * (1. + tempU)) + rho * lambda;
    scalar zeta = riemannFit::sqr(deltaOrth) + riemannFit::sqr(deltaPara);
    jacobian << xi * tempSmallU * tempV, -xi * riemannFit::sqr(rho) * deltaOrth, xi * deltaPara,
        2. * mu * tempSmallU * deltaPara, 2. * mu * tempV, mu * zeta - lambda * tempA, 0, 0, 1.;

    // translated circle parameters
    // phi
    circle.par(0) = atan2(tempB, tempC);
    // d
    circle.par(1) = tempA / (1 + tempU);
    // rho after translation. It is invariant, so noop
    // circle.par(2)= rho;

    // translated error matrix
    circle.cov = jacobian * circle.cov * jacobian.transpose();
  }

  template <typename M3xN, typename V4, int n>
  __host__ __device__ inline void prepareBrokenLineData(const M3xN& hits,
                                                        const V4& fast_fit,
                                                        const double bField,
                                                        PreparedBrokenLineData<n>& results) {
    riemannFit::Vector2d dVec;
    riemannFit::Vector2d eVec;

    int mId = 1;

    if constexpr (n > 3) {
      riemannFit::Vector2d middle = 0.5 * (hits.block(0, n - 1, 2, 1) + hits.block(0, 0, 2, 1));
      auto d1 = (hits.block(0, n / 2, 2, 1) - middle).squaredNorm();
      auto d2 = (hits.block(0, n / 2 - 1, 2, 1) - middle).squaredNorm();
      mId = d1 < d2 ? n / 2 : n / 2 - 1;
    }

    dVec = hits.block(0, mId, 2, 1) - hits.block(0, 0, 2, 1);
    eVec = hits.block(0, n - 1, 2, 1) - hits.block(0, mId, 2, 1);
    results.qCharge = riemannFit::cross2D(dVec, eVec) > 0 ? -1 : 1;

    const double slope = -results.qCharge / fast_fit(3);

    riemannFit::Matrix2d rotMat = rotationMatrix(slope);

    // calculate radii and s
    results.radii = hits.block(0, 0, 2, n) - fast_fit.head(2) * riemannFit::MatrixXd::Constant(1, n, 1);
    eVec = -fast_fit(2) * fast_fit.head(2) / fast_fit.head(2).norm();
    for (u_int i = 0; i < n; i++) {
      dVec = results.radii.block(0, i, 2, 1);
      results.sTransverse(i) = results.qCharge * fast_fit(2) *
                               atan2(riemannFit::cross2D(dVec, eVec), dVec.dot(eVec));  // calculates the arc length
    }
    riemannFit::VectorNd<n> zVec = hits.block(2, 0, 1, n).transpose();

    //calculate sTotal and zVec
    riemannFit::Matrix2xNd<n> pointsSZ = riemannFit::Matrix2xNd<n>::Zero();
    for (u_int i = 0; i < n; i++) {
      pointsSZ(0, i) = results.sTransverse(i);
      pointsSZ(1, i) = zVec(i);
      pointsSZ.block(0, i, 2, 1) = rotMat * pointsSZ.block(0, i, 2, 1);
    }
    results.sTotal = pointsSZ.block(0, 0, 1, n).transpose();
    results.zInSZplane = pointsSZ.block(1, 0, 1, n).transpose();

    //calculate varBeta
    results.varBeta(0) = results.varBeta(n - 1) = 0;
    for (u_int i = 1; i < n - 1; i++) {
      results.varBeta(i) = multScatt(results.sTotal(i + 1) - results.sTotal(i), bField, fast_fit(2), i + 2, slope) +
                           multScatt(results.sTotal(i) - results.sTotal(i - 1), bField, fast_fit(2), i + 1, slope);
    }
  }

  template <int n>
  __host__ __device__ inline riemannFit::MatrixNd<n> matrixC_u(const riemannFit::VectorNd<n>& weights,
                                                               const riemannFit::VectorNd<n>& sTotal,
                                                               const riemannFit::VectorNd<n>& varBeta) {
    riemannFit::MatrixNd<n> c_uMat = riemannFit::MatrixNd<n>::Zero();
    for (u_int i = 0; i < n; i++) {
      c_uMat(i, i) = weights(i);
      if (i > 1)
        c_uMat(i, i) += 1. / (varBeta(i - 1) * riemannFit::sqr(sTotal(i) - sTotal(i - 1)));
      if (i > 0 && i < n - 1)
        c_uMat(i, i) +=
            (1. / varBeta(i)) * riemannFit::sqr((sTotal(i + 1) - sTotal(i - 1)) /
                                                ((sTotal(i + 1) - sTotal(i)) * (sTotal(i) - sTotal(i - 1))));
      if (i < n - 2)
        c_uMat(i, i) += 1. / (varBeta(i + 1) * riemannFit::sqr(sTotal(i + 1) - sTotal(i)));

      if (i > 0 && i < n - 1)
        c_uMat(i, i + 1) =
            1. / (varBeta(i) * (sTotal(i + 1) - sTotal(i))) *
            (-(sTotal(i + 1) - sTotal(i - 1)) / ((sTotal(i + 1) - sTotal(i)) * (sTotal(i) - sTotal(i - 1))));
      if (i < n - 2)
        c_uMat(i, i + 1) +=
            1. / (varBeta(i + 1) * (sTotal(i + 1) - sTotal(i))) *
            (-(sTotal(i + 2) - sTotal(i)) / ((sTotal(i + 2) - sTotal(i + 1)) * (sTotal(i + 1) - sTotal(i))));

      if (i < n - 2)
        c_uMat(i, i + 2) = 1. / (varBeta(i + 1) * (sTotal(i + 2) - sTotal(i + 1)) * (sTotal(i + 1) - sTotal(i)));

      c_uMat(i, i) *= 0.5;
    }
    return c_uMat + c_uMat.transpose();
  }

  template <typename M3xN, typename V4>
  __host__ __device__ inline void fastFit(const M3xN& hits, V4& result) {
    constexpr uint32_t n = M3xN::ColsAtCompileTime;

    int mId = 1;

    if constexpr (n > 3) {
      riemannFit::Vector2d middle = 0.5 * (hits.block(0, n - 1, 2, 1) + hits.block(0, 0, 2, 1));
      auto d1 = (hits.block(0, n / 2, 2, 1) - middle).squaredNorm();
      auto d2 = (hits.block(0, n / 2 - 1, 2, 1) - middle).squaredNorm();
      mId = d1 < d2 ? n / 2 : n / 2 - 1;
    }

    const riemannFit::Vector2d a = hits.block(0, mId, 2, 1) - hits.block(0, 0, 2, 1);
    const riemannFit::Vector2d b = hits.block(0, n - 1, 2, 1) - hits.block(0, mId, 2, 1);
    const riemannFit::Vector2d c = hits.block(0, 0, 2, 1) - hits.block(0, n - 1, 2, 1);

    auto tmp = 0.5 / riemannFit::cross2D(c, a);
    result(0) = hits(0, 0) - (a(1) * c.squaredNorm() + c(1) * a.squaredNorm()) * tmp;
    result(1) = hits(1, 0) + (a(0) * c.squaredNorm() + c(0) * a.squaredNorm()) * tmp;
    // check Wikipedia for these formulas

    result(2) = sqrt(a.squaredNorm() * b.squaredNorm() * c.squaredNorm()) / (2. * std::abs(riemannFit::cross2D(b, a)));
    // Using Math Olympiad's formula R=abc/(4A)

    const riemannFit::Vector2d d = hits.block(0, 0, 2, 1) - result.head(2);
    const riemannFit::Vector2d e = hits.block(0, n - 1, 2, 1) - result.head(2);

    result(3) = result(2) * atan2(riemannFit::cross2D(d, e), d.dot(e)) / (hits(2, n - 1) - hits(2, 0));
    // ds/dz slope between last and first point
  }

  template <typename M3xN, typename M6xN, typename V4, int n>
  __host__ __device__ inline void circleFit(const M3xN& hits,
                                            const M6xN& hits_ge,
                                            const V4& fast_fit,
                                            const double bField,
                                            PreparedBrokenLineData<n>& data,
                                            karimaki_circle_fit& circle_results) {
    circle_results.qCharge = data.qCharge;
    auto& radii = data.radii;
    const auto& sTransverse = data.sTransverse;
    const auto& sTotal = data.sTotal;
    auto& zInSZplane = data.zInSZplane;
    auto& varBeta = data.varBeta;
    const double slope = -circle_results.qCharge / fast_fit(3);
    varBeta *= 1. + riemannFit::sqr(slope);  // the kink angles are projected!

    for (u_int i = 0; i < n; i++) {
      zInSZplane(i) = radii.block(0, i, 2, 1).norm() - fast_fit(2);
    }

    riemannFit::Matrix2d vMat;           // covariance matrix
    riemannFit::VectorNd<n> weightsVec;  // weights
    riemannFit::Matrix2d rotMat;         // rotation matrix point by point
    for (u_int i = 0; i < n; i++) {
      vMat(0, 0) = hits_ge.col(i)[0];               // x errors
      vMat(0, 1) = vMat(1, 0) = hits_ge.col(i)[1];  // cov_xy
      vMat(1, 1) = hits_ge.col(i)[2];               // y errors
      rotMat = rotationMatrix(-radii(0, i) / radii(1, i));
      weightsVec(i) =
          1. / ((rotMat * vMat * rotMat.transpose())(1, 1));  // compute the orthogonal weight point by point
    }

    riemannFit::VectorNplusONEd<n> r_uVec;
    r_uVec(n) = 0;
    for (u_int i = 0; i < n; i++) {
      r_uVec(i) = weightsVec(i) * zInSZplane(i);
    }

    riemannFit::MatrixNplusONEd<n> c_uMat;
    c_uMat.block(0, 0, n, n) = matrixC_u(weightsVec, sTransverse, varBeta);
    c_uMat(n, n) = 0;
    //add the border to the c_uMat matrix
    for (u_int i = 0; i < n; i++) {
      c_uMat(i, n) = 0;
      if (i > 0 && i < n - 1) {
        c_uMat(i, n) +=
            -(sTransverse(i + 1) - sTransverse(i - 1)) * (sTransverse(i + 1) - sTransverse(i - 1)) /
            (2. * varBeta(i) * (sTransverse(i + 1) - sTransverse(i)) * (sTransverse(i) - sTransverse(i - 1)));
      }
      if (i > 1) {
        c_uMat(i, n) +=
            (sTransverse(i) - sTransverse(i - 2)) / (2. * varBeta(i - 1) * (sTransverse(i) - sTransverse(i - 1)));
      }
      if (i < n - 2) {
        c_uMat(i, n) +=
            (sTransverse(i + 2) - sTransverse(i)) / (2. * varBeta(i + 1) * (sTransverse(i + 1) - sTransverse(i)));
      }
      c_uMat(n, i) = c_uMat(i, n);
      if (i > 0 && i < n - 1)
        c_uMat(n, n) += riemannFit::sqr(sTransverse(i + 1) - sTransverse(i - 1)) / (4. * varBeta(i));
    }

#ifdef CPP_DUMP
    std::cout << "CU5\n" << c_uMat << std::endl;
#endif
    riemannFit::MatrixNplusONEd<n> iMat;
    math::cholesky::invert(c_uMat, iMat);
#ifdef CPP_DUMP
    std::cout << "I5\n" << iMat << std::endl;
#endif

    riemannFit::VectorNplusONEd<n> uVec = iMat * r_uVec;  // obtain the fitted parameters by solving the linear system

    // compute (phi, d_ca, k) in the system in which the midpoint of the first two corrected hits is the origin...

    radii.block(0, 0, 2, 1) /= radii.block(0, 0, 2, 1).norm();
    radii.block(0, 1, 2, 1) /= radii.block(0, 1, 2, 1).norm();

    riemannFit::Vector2d dVec = hits.block(0, 0, 2, 1) + (-zInSZplane(0) + uVec(0)) * radii.block(0, 0, 2, 1);
    riemannFit::Vector2d eVec = hits.block(0, 1, 2, 1) + (-zInSZplane(1) + uVec(1)) * radii.block(0, 1, 2, 1);
    auto eMinusd = eVec - dVec;
    auto eMinusd2 = eMinusd.squaredNorm();
    auto tmp1 = 1. / eMinusd2;
    auto tmp2 = sqrt(riemannFit::sqr(fast_fit(2)) - 0.25 * eMinusd2);

    circle_results.par << atan2(eMinusd(1), eMinusd(0)), circle_results.qCharge * (tmp2 - fast_fit(2)),
        circle_results.qCharge * (1. / fast_fit(2) + uVec(n));

    tmp2 = 1. / tmp2;

    riemannFit::Matrix3d jacobian;
    jacobian << (radii(1, 0) * eMinusd(0) - eMinusd(1) * radii(0, 0)) * tmp1,
        (radii(1, 1) * eMinusd(0) - eMinusd(1) * radii(0, 1)) * tmp1, 0,
        circle_results.qCharge * (eMinusd(0) * radii(0, 0) + eMinusd(1) * radii(1, 0)) * tmp2,
        circle_results.qCharge * (eMinusd(0) * radii(0, 1) + eMinusd(1) * radii(1, 1)) * tmp2, 0, 0, 0,
        circle_results.qCharge;

    circle_results.cov << iMat(0, 0), iMat(0, 1), iMat(0, n), iMat(1, 0), iMat(1, 1), iMat(1, n), iMat(n, 0),
        iMat(n, 1), iMat(n, n);

    circle_results.cov = jacobian * circle_results.cov * jacobian.transpose();

    //...Translate in the system in which the first corrected hit is the origin, adding the m.s. correction...

    translateKarimaki(circle_results, 0.5 * eMinusd(0), 0.5 * eMinusd(1), jacobian);
    circle_results.cov(0, 0) +=
        (1 + riemannFit::sqr(slope)) * multScatt(sTotal(1) - sTotal(0), bField, fast_fit(2), 2, slope);

    //...And translate back to the original system

    translateKarimaki(circle_results, dVec(0), dVec(1), jacobian);

    // compute chi2
    circle_results.chi2 = 0;
    for (u_int i = 0; i < n; i++) {
      circle_results.chi2 += weightsVec(i) * riemannFit::sqr(zInSZplane(i) - uVec(i));
      if (i > 0 && i < n - 1)
        circle_results.chi2 +=
            riemannFit::sqr(uVec(i - 1) / (sTransverse(i) - sTransverse(i - 1)) -
                            uVec(i) * (sTransverse(i + 1) - sTransverse(i - 1)) /
                                ((sTransverse(i + 1) - sTransverse(i)) * (sTransverse(i) - sTransverse(i - 1))) +
                            uVec(i + 1) / (sTransverse(i + 1) - sTransverse(i)) +
                            (sTransverse(i + 1) - sTransverse(i - 1)) * uVec(n) / 2) /
            varBeta(i);
    }
  }

  template <typename V4, typename M6xN, int n>
  __host__ __device__ inline void lineFit(const M6xN& hits_ge,
                                          const V4& fast_fit,
                                          const double bField,
                                          const PreparedBrokenLineData<n>& data,
                                          riemannFit::LineFit& line_results) {
    const auto& radii = data.radii;
    const auto& sTotal = data.sTotal;
    const auto& zInSZplane = data.zInSZplane;
    const auto& varBeta = data.varBeta;

    const double slope = -data.qCharge / fast_fit(3);
    riemannFit::Matrix2d rotMat = rotationMatrix(slope);

    riemannFit::Matrix3d vMat = riemannFit::Matrix3d::Zero();  // covariance matrix XYZ
    riemannFit::Matrix2x3d jacobXYZtosZ =
        riemannFit::Matrix2x3d::Zero();  // jacobian for computation of the error on s (xyz -> sz)
    riemannFit::VectorNd<n> weights = riemannFit::VectorNd<n>::Zero();
    for (u_int i = 0; i < n; i++) {
      vMat(0, 0) = hits_ge.col(i)[0];               // x errors
      vMat(0, 1) = vMat(1, 0) = hits_ge.col(i)[1];  // cov_xy
      vMat(0, 2) = vMat(2, 0) = hits_ge.col(i)[3];  // cov_xz
      vMat(1, 1) = hits_ge.col(i)[2];               // y errors
      vMat(2, 1) = vMat(1, 2) = hits_ge.col(i)[4];  // cov_yz
      vMat(2, 2) = hits_ge.col(i)[5];               // z errors
      auto tmp = 1. / radii.block(0, i, 2, 1).norm();
      jacobXYZtosZ(0, 0) = radii(1, i) * tmp;
      jacobXYZtosZ(0, 1) = -radii(0, i) * tmp;
      jacobXYZtosZ(1, 2) = 1.;
      weights(i) = 1. / ((rotMat * jacobXYZtosZ * vMat * jacobXYZtosZ.transpose() * rotMat.transpose())(
                            1, 1));  // compute the orthogonal weight point by point
    }

    riemannFit::VectorNd<n> r_u;
    for (u_int i = 0; i < n; i++) {
      r_u(i) = weights(i) * zInSZplane(i);
    }
#ifdef CPP_DUMP
    std::cout << "CU4\n" << matrixC_u(w, sTotal, varBeta) << std::endl;
#endif
    riemannFit::MatrixNd<n> iMat;
    math::cholesky::invert(matrixC_u(weights, sTotal, varBeta), iMat);
#ifdef CPP_DUMP
    std::cout << "I4\n" << iMat << std::endl;
#endif

    riemannFit::VectorNd<n> uVec = iMat * r_u;  // obtain the fitted parameters by solving the linear system

    // line parameters in the system in which the first hit is the origin and with axis along SZ
    line_results.par << (uVec(1) - uVec(0)) / (sTotal(1) - sTotal(0)), uVec(0);
    auto idiff = 1. / (sTotal(1) - sTotal(0));
    line_results.cov << (iMat(0, 0) - 2 * iMat(0, 1) + iMat(1, 1)) * riemannFit::sqr(idiff) +
                            multScatt(sTotal(1) - sTotal(0), bField, fast_fit(2), 2, slope),
        (iMat(0, 1) - iMat(0, 0)) * idiff, (iMat(0, 1) - iMat(0, 0)) * idiff, iMat(0, 0);

    // translate to the original SZ system
    riemannFit::Matrix2d jacobian;
    jacobian(0, 0) = 1.;
    jacobian(0, 1) = 0;
    jacobian(1, 0) = -sTotal(0);
    jacobian(1, 1) = 1.;
    line_results.par(1) += -line_results.par(0) * sTotal(0);
    line_results.cov = jacobian * line_results.cov * jacobian.transpose();

    // rotate to the original sz system
    auto tmp = rotMat(0, 0) - line_results.par(0) * rotMat(0, 1);
    jacobian(1, 1) = 1. / tmp;
    jacobian(0, 0) = jacobian(1, 1) * jacobian(1, 1);
    jacobian(0, 1) = 0;
    jacobian(1, 0) = line_results.par(1) * rotMat(0, 1) * jacobian(0, 0);
    line_results.par(1) = line_results.par(1) * jacobian(1, 1);
    line_results.par(0) = (rotMat(0, 1) + line_results.par(0) * rotMat(0, 0)) * jacobian(1, 1);
    line_results.cov = jacobian * line_results.cov * jacobian.transpose();

    // compute chi2
    line_results.chi2 = 0;
    for (u_int i = 0; i < n; i++) {
      line_results.chi2 += weights(i) * riemannFit::sqr(zInSZplane(i) - uVec(i));
      if (i > 0 && i < n - 1)
        line_results.chi2 += riemannFit::sqr(uVec(i - 1) / (sTotal(i) - sTotal(i - 1)) -
                                             uVec(i) * (sTotal(i + 1) - sTotal(i - 1)) /
                                                 ((sTotal(i + 1) - sTotal(i)) * (sTotal(i) - sTotal(i - 1))) +
                                             uVec(i + 1) / (sTotal(i + 1) - sTotal(i))) /
                             varBeta(i);
    }
  }

  template <int n>
  inline riemannFit::HelixFit helixFit(const riemannFit::Matrix3xNd<n>& hits,
                                       const Eigen::Matrix<float, 6, 4>& hits_ge,
                                       const double bField) {
    riemannFit::HelixFit helix;
    riemannFit::Vector4d fast_fit;
    fastFit(hits, fast_fit);

    PreparedBrokenLineData<n> data;
    karimaki_circle_fit circle;
    riemannFit::LineFit line;
    riemannFit::Matrix3d jacobian;

    prepareBrokenLineData(hits, fast_fit, bField, data);
    lineFit(hits_ge, fast_fit, bField, data, line);
    circleFit(hits, hits_ge, fast_fit, bField, data, circle);

    // the circle fit gives k, but here we want p_t, so let's change the parameter and the covariance matrix
    jacobian << 1., 0, 0, 0, 1., 0, 0, 0,
        -std::abs(circle.par(2)) * bField / (riemannFit::sqr(circle.par(2)) * circle.par(2));
    circle.par(2) = bField / std::abs(circle.par(2));
    circle.cov = jacobian * circle.cov * jacobian.transpose();

    helix.par << circle.par, line.par;
    helix.cov = riemannFit::MatrixXd::Zero(5, 5);
    helix.cov.block(0, 0, 3, 3) = circle.cov;
    helix.cov.block(3, 3, 2, 2) = line.cov;
    helix.qCharge = circle.qCharge;
    helix.chi2_circle = circle.chi2;
    helix.chi2_line = line.chi2;

    return helix;
  }

}  // namespace brokenline

#endif  // RecoPixelVertexing_PixelTrackFitting_interface_BrokenLine_h