Inheritance diagram for SiStripHitEfficiencyWorker:

Classes
struct	EffME1

struct	EffTkMap

Public Member Functions
	SiStripHitEfficiencyWorker (const edm::ParameterSet &conf)

	~SiStripHitEfficiencyWorker () override=default

Public Member Functions inherited from DQMEDAnalyzer
void	accumulate (edm::Event const &event, edm::EventSetup const &setup) final

void	beginLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final

void	beginRun (edm::Run const &run, edm::EventSetup const &setup) final

void	beginStream (edm::StreamID id) final

virtual void	dqmBeginRun (edm::Run const &, edm::EventSetup const &)

	DQMEDAnalyzer ()

void	endLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final

void	endRun (edm::Run const &run, edm::EventSetup const &setup) final

virtual bool	getCanSaveByLumi ()

Public Member Functions inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
	EDProducer ()=default

	EDProducer (const EDProducer &)=delete

bool	hasAbilityToProduceInBeginLumis () const final

bool	hasAbilityToProduceInBeginProcessBlocks () const final

bool	hasAbilityToProduceInBeginRuns () const final

bool	hasAbilityToProduceInEndLumis () const final

bool	hasAbilityToProduceInEndProcessBlocks () const final

bool	hasAbilityToProduceInEndRuns () const final

const EDProducer &	operator= (const EDProducer &)=delete

Static Public Member Functions
static void	fillDescriptions (edm::ConfigurationDescriptions &descriptions)

Static Public Member Functions inherited from DQMEDAnalyzer
static void	globalEndJob (DQMEDAnalyzerGlobalCache const *)

static void	globalEndLuminosityBlockProduce (edm::LuminosityBlock &lumi, edm::EventSetup const &setup, LuminosityBlockContext const *context)

static void	globalEndRunProduce (edm::Run &run, edm::EventSetup const &setup, RunContext const *context)

static std::unique_ptr< DQMEDAnalyzerGlobalCache >	initializeGlobalCache (edm::ParameterSet const &)

Private Member Functions
void	analyze (const edm::Event &e, const edm::EventSetup &c) override

void	bookHistograms (DQMStore::IBooker &booker, const edm::Run &run, const edm::EventSetup &setup) override

void	fillForTraj (const TrajectoryAtInvalidHit &tm, const TrackerTopology tTopo, const TrackerGeometry tkgeom, const StripClusterParameterEstimator &stripCPE, const SiStripQuality &stripQuality, const DetIdCollection &fedErrorIds, const edm::Handle< edm::DetSetVector< SiStripRawDigi >> &commonModeDigis, const edmNew::DetSetVector< SiStripCluster > &theClusters, int bunchCrossing, float instLumi, float PU, bool highPurity)

Private Attributes
bool	addCommonMode_

bool	addLumi_

std::set< uint32_t >	badModules_

int	bunchX_

SiStripHitEffData	calibData_

const edm::ESGetToken< Chi2MeasurementEstimatorBase, TrackingComponentsRecord >	chi2EstimatorToken_

unsigned int	clusterMatchingMethod_

const edm::EDGetTokenT< edmNew::DetSetVector< SiStripCluster > >	clusters_token_

float	clusterTracjDist_

const edm::EDGetTokenT< reco::TrackCollection >	combinatorialTracks_token_

const edm::EDGetTokenT< edm::DetSetVector< SiStripRawDigi > >	commonModeToken_

bool	cutOnTracks_

bool	DEBUG_

const edm::EDGetTokenT< DetIdCollection >	digis_token_

std::string	dqmDir_

EffME1	h_allLayer

MonitorElement *	h_bx

EffME1	h_goodLayer

std::vector< MonitorElement * >	h_hotcold

MonitorElement *	h_instLumi

EffME1	h_layer

std::vector< EffME1 >	h_layer_vsBx

std::vector< EffME1 >	h_layer_vsCM

std::vector< EffME1 >	h_layer_vsLumi

std::vector< EffME1 >	h_layer_vsPU

EffTkMap	h_module

MonitorElement *	h_nTracks

MonitorElement *	h_nTracksVsPU

MonitorElement *	h_PU

std::vector< MonitorElement * >	h_resolution

unsigned int	layers_

const edm::ESGetToken< MagneticField, IdealMagneticFieldRecord >	magFieldToken_

const edm::ESGetToken< MeasurementTracker, CkfComponentsRecord >	measTrackerToken_

const edm::EDGetTokenT< OnlineLuminosityRecord >	metaDataToken_

unsigned int	nTEClayers_

const edm::ESGetToken< Propagator, TrackingComponentsRecord >	propagatorToken_

float	resXSig_

const edm::EDGetTokenT< LumiScalersCollection >	scalerToken_

bool	showRings_

bool	showTOB6TEC9_

const edm::ESGetToken< StripClusterParameterEstimator, TkStripCPERecord >	stripCPEToken_

const edm::ESGetToken< SiStripQuality, SiStripQualityRcd >	stripQualityToken_

float	stripsApvEdge_

const edm::ESGetToken< TkDetMap, TrackerTopologyRcd >	tkDetMapToken_

const edm::ESGetToken< TrackerGeometry, TrackerDigiGeometryRecord >	tkGeomToken_

const edm::EDGetTokenT< MeasurementTrackerEvent >	trackerEvent_token_

unsigned int	trackMultiplicityCut_

const edm::EDGetTokenT< std::vector< Trajectory > >	trajectories_token_

const edm::EDGetTokenT< TrajTrackAssociationCollection >	trajTrackAsso_token_

const edm::ESGetToken< TrackerTopology, TrackerTopologyRcd >	tTopoToken_

bool	useAllHitsFromTracksWithMissingHits_

bool	useFirstMeas_

bool	useLastMeas_

bool	useOnlyHighPurityTracks_

Additional Inherited Members
Public Types inherited from DQMEDAnalyzer
typedef dqm::reco::DQMStore	DQMStore

typedef dqm::reco::MonitorElement	MonitorElement

Public Types inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
using	CacheTypes = CacheContexts< T... >

using	GlobalCache = typename CacheTypes::GlobalCache

using	HasAbility = AbilityChecker< T... >

using	InputProcessBlockCache = typename CacheTypes::InputProcessBlockCache

using	LuminosityBlockCache = typename CacheTypes::LuminosityBlockCache

using	LuminosityBlockContext = LuminosityBlockContextT< LuminosityBlockCache, RunCache, GlobalCache >

using	LuminosityBlockSummaryCache = typename CacheTypes::LuminosityBlockSummaryCache

using	RunCache = typename CacheTypes::RunCache

using	RunContext = RunContextT< RunCache, GlobalCache >

using	RunSummaryCache = typename CacheTypes::RunSummaryCache

Protected Member Functions inherited from DQMEDAnalyzer
uint64_t	meId () const

Protected Attributes inherited from DQMEDAnalyzer
edm::EDPutTokenT< DQMToken >	lumiToken_

edm::EDPutTokenT< DQMToken >	runToken_

unsigned int	streamId_

Detailed Description

Definition at line 62 of file SiStripHitEfficiencyWorker.cc.

Constructor & Destructor Documentation

◆ SiStripHitEfficiencyWorker()

SiStripHitEfficiencyWorker::SiStripHitEfficiencyWorker ( const edm::ParameterSet & conf )

explicit

Definition at line 180 of file SiStripHitEfficiencyWorker.cc.

     : scalerToken_(consumes<LumiScalersCollection>(conf.getParameter<edm::InputTag>("lumiScalers"))),
       metaDataToken_(consumes<OnlineLuminosityRecord>(conf.getParameter<edm::InputTag>("metadata"))),
       commonModeToken_(mayConsume<edm::DetSetVector<SiStripRawDigi>>(conf.getParameter<edm::InputTag>("commonMode"))),
       combinatorialTracks_token_(
           consumes<reco::TrackCollection>(conf.getParameter<edm::InputTag>("combinatorialTracks"))),
       trajectories_token_(consumes<std::vector<Trajectory>>(conf.getParameter<edm::InputTag>("trajectories"))),
       trajTrackAsso_token_(consumes<TrajTrackAssociationCollection>(conf.getParameter<edm::InputTag>("trajectories"))),
       clusters_token_(
           consumes<edmNew::DetSetVector<SiStripCluster>>(conf.getParameter<edm::InputTag>("siStripClusters"))),
       digis_token_(consumes<DetIdCollection>(conf.getParameter<edm::InputTag>("siStripDigis"))),
       trackerEvent_token_(consumes<MeasurementTrackerEvent>(conf.getParameter<edm::InputTag>("trackerEvent"))),
       tTopoToken_(esConsumes()),
       tkGeomToken_(esConsumes()),
       stripCPEToken_(esConsumes(edm::ESInputTag{"", "StripCPEfromTrackAngle"})),
       stripQualityToken_(esConsumes()),
       magFieldToken_(esConsumes()),
       measTrackerToken_(esConsumes()),
       chi2EstimatorToken_(esConsumes(edm::ESInputTag{"", "Chi2"})),
       propagatorToken_(esConsumes(edm::ESInputTag{"", "PropagatorWithMaterial"})),
       tkDetMapToken_(esConsumes<edm::Transition::BeginRun>()),
       dqmDir_(conf.getParameter<std::string>("dqmDir")),
       layers_(conf.getParameter<int>("Layer")),
       DEBUG_(conf.getUntrackedParameter<bool>("Debug", false)),
       addLumi_(conf.getUntrackedParameter<bool>("addLumi", false)),
       addCommonMode_(conf.getUntrackedParameter<bool>("addCommonMode", false)),
       cutOnTracks_(conf.getParameter<bool>("cutOnTracks")),
       trackMultiplicityCut_(conf.getParameter<unsigned int>("trackMultiplicity")),
       useFirstMeas_(conf.getParameter<bool>("useFirstMeas")),
       useLastMeas_(conf.getParameter<bool>("useLastMeas")),
       useAllHitsFromTracksWithMissingHits_(conf.getParameter<bool>("useAllHitsFromTracksWithMissingHits")),
       clusterMatchingMethod_(conf.getParameter<int>("ClusterMatchingMethod")),
       resXSig_(conf.getParameter<double>("ResXSig")),
       clusterTracjDist_(conf.getParameter<double>("ClusterTrajDist")),
       stripsApvEdge_(conf.getParameter<double>("StripsApvEdge")),
       useOnlyHighPurityTracks_(conf.getParameter<bool>("UseOnlyHighPurityTracks")),
       bunchX_(conf.getUntrackedParameter<int>("BunchCrossing", 0)),
       showRings_(conf.getUntrackedParameter<bool>("ShowRings", false)),
       showTOB6TEC9_(conf.getUntrackedParameter<bool>("ShowTOB6TEC9", false)) {
   nTEClayers_ = (showRings_ ? 7 : 9);  // number of rings or wheels
 
   const std::string badModulesFile = conf.getUntrackedParameter<std::string>("BadModulesFile", "");
   if (!badModulesFile.empty()) {
     std::ifstream badModules_file(badModulesFile);
     uint32_t badmodule_detid;
     int mods, fiber1, fiber2, fiber3;
     if (badModules_file.is_open()) {
       std::string line;
       while (getline(badModules_file, line)) {
         if (badModules_file.eof())
           continue;
         std::stringstream ss(line);
         ss >> badmodule_detid >> mods >> fiber1 >> fiber2 >> fiber3;
         if (badmodule_detid != 0 && mods == 1 && (fiber1 == 1 || fiber2 == 1 || fiber3 == 1))
           badModules_.insert(badmodule_detid);
       }
       badModules_file.close();
     }
   }
   if (!badModules_.empty())
     LogDebug("SiStripHitEfficiencyWorker") << "Remove additionnal bad modules from the analysis: ";
   for (const auto badMod : badModules_) {
     LogDebug("SiStripHitEfficiencyWorker") << " " << badMod;
   }
 }

◆ ~SiStripHitEfficiencyWorker()

SiStripHitEfficiencyWorker::~SiStripHitEfficiencyWorker ( )

overridedefault

Member Function Documentation

◆ analyze()

void SiStripHitEfficiencyWorker::analyze	(	const edm::Event &	e,
		const edm::EventSetup &	c
	)

overrideprivatevirtual

Reimplemented from DQMEDAnalyzer.

Definition at line 378 of file SiStripHitEfficiencyWorker.cc.

References addCommonMode_, addLumi_, anyDirection, OnlineLuminosityRecord::avgPileUp(), calibData_, chi2EstimatorToken_, clusters_token_, combinatorialTracks_token_, commonModeToken_, cutOnTracks_, digis_token_, MillePedeFileConverter_cfg::e, SiStripHitEffData::EventStats, SiStripHitEffData::fedErrorCounts, SiStripHitEffData::FEDErrorOccupancy, dqm::impl::MonitorElement::Fill(), fillForTraj(), edm::EventSetup::getData(), h_bx, h_instLumi, h_nTracks, h_nTracksVsPU, h_PU, muons_cff::highPurity, muonGEMDigis_cfi::instLumi, OnlineLuminosityRecord::instLumi(), edm::HandleBase::isValid(), LogDebug, V0Monitor_cfi::lumiScalers, magFieldToken_, measTrackerToken_, HLT_2022v15_cff::measurementTrackerEvent, metaDataToken_, combine::missing, TrackCandidateProducer_cfi::propagator, propagatorToken_, MLClient_cfi::PU, scalerToken_, stripCPEToken_, stripQualityToken_, SiStripSubdetector::TEC, SiStripSubdetector::TIB, tkGeomToken_, createJobs::tmp, trackerEvent_token_, trackMultiplicityCut_, trajectories_token_, trajTrackAsso_token_, tTopoToken_, useAllHitsFromTracksWithMissingHits_, useFirstMeas_, and useLastMeas_.

                                                                                    {
   const auto tTopo = &es.getData(tTopoToken_);
 
   //  bool DEBUG_ = false;
 
   LogDebug("SiStripHitEfficiencyWorker") << "beginning analyze from HitEff";
 
   // Step A: Get Inputs
 
   // Luminosity informations
   edm::Handle<LumiScalersCollection> lumiScalers = e.getHandle(scalerToken_);
   edm::Handle<OnlineLuminosityRecord> metaData = e.getHandle(metaDataToken_);
 
   float instLumi = 0;
   float PU = 0;
   if (addLumi_) {
     if (lumiScalers.isValid() && !lumiScalers->empty()) {
       if (lumiScalers->begin() != lumiScalers->end()) {
         instLumi = lumiScalers->begin()->instantLumi();
         PU = lumiScalers->begin()->pileup();
       }
     } else if (metaData.isValid()) {
       instLumi = metaData->instLumi();
       PU = metaData->avgPileUp();
     } else {
       edm::LogWarning("SiStripHitEfficiencyWorker") << "could not find a source for the Luminosity and PU";
     }
   }
 
   h_bx->Fill(e.bunchCrossing());
   h_instLumi->Fill(instLumi);
   h_PU->Fill(PU);
 
   edm::Handle<edm::DetSetVector<SiStripRawDigi>> commonModeDigis;
   if (addCommonMode_)
     e.getByToken(commonModeToken_, commonModeDigis);
 
   edm::Handle<reco::TrackCollection> tracksCKF;
   e.getByToken(combinatorialTracks_token_, tracksCKF);
 
   edm::Handle<std::vector<Trajectory>> TrajectoryCollectionCKF;
   e.getByToken(trajectories_token_, TrajectoryCollectionCKF);
 
   edm::Handle<TrajTrackAssociationCollection> trajTrackAssociationHandle;
   e.getByToken(trajTrackAsso_token_, trajTrackAssociationHandle);
 
   edm::Handle<edmNew::DetSetVector<SiStripCluster>> theClusters;
   e.getByToken(clusters_token_, theClusters);
 
   edm::Handle<DetIdCollection> fedErrorIds;
   e.getByToken(digis_token_, fedErrorIds);
 
   // fill the calibData with the FEDErrors
   for (const auto& fedErr : *fedErrorIds) {
     // fill the TkHistoMap occupancy map
     calibData_.FEDErrorOccupancy->fill(fedErr.rawId(), 1.);
 
     // fill the unordered map
     if (calibData_.fedErrorCounts.find(fedErr.rawId()) != calibData_.fedErrorCounts.end()) {
       calibData_.fedErrorCounts[fedErr.rawId()] += 1;
     } else {
       calibData_.fedErrorCounts.insert(std::make_pair(fedErr.rawId(), 1));
     }
   }
 
   edm::Handle<MeasurementTrackerEvent> measurementTrackerEvent;
   e.getByToken(trackerEvent_token_, measurementTrackerEvent);
 
   const auto tkgeom = &es.getData(tkGeomToken_);
   const auto& stripcpe = es.getData(stripCPEToken_);
   const auto& stripQuality = es.getData(stripQualityToken_);
   const auto& magField = es.getData(magFieldToken_);
   const auto& measTracker = es.getData(measTrackerToken_);
   const auto& chi2Estimator = es.getData(chi2EstimatorToken_);
   const auto& prop = es.getData(propagatorToken_);
 
   // Tracking
   LogDebug("SiStripHitEfficiencyWorker") << "number ckf tracks found = " << tracksCKF->size();
 
   h_nTracks->Fill(tracksCKF->size());
   h_nTracksVsPU->Fill(PU, tracksCKF->size());
 
   // bin 0: one entry for each event
   calibData_.EventStats->Fill(0., 0., 1);
   // bin 1: one entry for each track
   calibData_.EventStats->Fill(1., 0., tracksCKF->size());
 
   if (!tracksCKF->empty()) {
     if (cutOnTracks_ && (tracksCKF->size() >= trackMultiplicityCut_))
       return;
     if (cutOnTracks_)
       LogDebug("SiStripHitEfficiencyWorker")
           << "starting checking good event with < " << trackMultiplicityCut_ << " tracks";
 
     // actually should do a loop over all the tracks in the event here
 
     // Looping over traj-track associations to be able to get traj & track informations
     for (const auto& trajTrack : *trajTrackAssociationHandle) {
       // for each track, fill some variables such as number of hits and momentum
 
       const bool highPurity = trajTrack.val->quality(reco::TrackBase::TrackQuality::highPurity);
       auto TMeas = trajTrack.key->measurements();
 
       const bool hasMissingHits = std::any_of(std::begin(TMeas), std::end(TMeas), [](const auto& tm) {
         return tm.recHit()->getType() == TrackingRecHit::Type::missing;
       });
 
       // Loop on each measurement and take into consideration
       //--------------------------------------------------------
       for (auto itm = TMeas.cbegin(); itm != TMeas.cend(); ++itm) {
         const auto theInHit = (*itm).recHit();
 
         //bin 2: one entry for each measurement
         calibData_.EventStats->Fill(2., 0., 1.);
 
         LogDebug("SiStripHitEfficiencyWorker") << "theInHit is valid = " << theInHit->isValid();
 
         unsigned int iidd = theInHit->geographicalId().rawId();
 
         unsigned int TKlayers = ::checkLayer(iidd, tTopo);
 
         // do not bother with pixel hits
         if (DetId(iidd).subdetId() < SiStripSubdetector::TIB)
           continue;
 
         LogDebug("SiStripHitEfficiencyWorker") << "TKlayer from trajectory: " << TKlayers << "  from module = " << iidd
                                                << "   matched/stereo/rphi = " << ((iidd & 0x3) == 0) << "/"
                                                << ((iidd & 0x3) == 1) << "/" << ((iidd & 0x3) == 2);
 
         // Test first and last points of the trajectory
         // the list of measurements starts from outer layers  !!! This could change -> should add a check
         if ((!useFirstMeas_ && (itm == (TMeas.end() - 1))) || (!useLastMeas_ && (itm == (TMeas.begin()))) ||
             // In case of missing hit in the track, check whether to use the other hits or not.
             (!useAllHitsFromTracksWithMissingHits_ && hasMissingHits &&
              theInHit->getType() != TrackingRecHit::Type::missing))
           continue;
         // If Trajectory measurement from TOB 6 or TEC 9, skip it because it's always valid they are filled later
         if (TKlayers == bounds::k_LayersAtTOBEnd || TKlayers == bounds::k_LayersAtTECEnd) {
           LogDebug("SiStripHitEfficiencyWorker") << "skipping original TM for TOB 6 or TEC 9";
           continue;
         }
 
         std::vector<TrajectoryAtInvalidHit> TMs;
 
         // Make AnalyticalPropagat // TODO where to save these?or to use in TAVH constructor
         AnalyticalPropagator propagator(&magField, anyDirection);
 
         // for double sided layers check both sensors--if no hit was found on either sensor surface,
         // the trajectory measurements only have one invalid hit entry on the matched surface
         // so get the TrajectoryAtInvalidHit for both surfaces and include them in the study
         if (::isDoubleSided(iidd, tTopo) && ((iidd & 0x3) == 0)) {
           // do hit eff check twice--once for each sensor
           //add a TM for each surface
           TMs.emplace_back(*itm, tTopo, tkgeom, propagator, 1);
           TMs.emplace_back(*itm, tTopo, tkgeom, propagator, 2);
         } else if (::isDoubleSided(iidd, tTopo) && (!::check2DPartner(iidd, TMeas))) {
           // if only one hit was found the trajectory measurement is on that sensor surface, and the other surface from
           // the matched layer should be added to the study as well
           TMs.emplace_back(*itm, tTopo, tkgeom, propagator, 1);
           TMs.emplace_back(*itm, tTopo, tkgeom, propagator, 2);
           LogDebug("SiStripHitEfficiencyWorker") << " found a hit with a missing partner";
         } else {
           //only add one TM for the single surface and the other will be added in the next iteration
           TMs.emplace_back(*itm, tTopo, tkgeom, propagator);
         }
 
         //Now check for tracks at TOB6 and TEC9
 
         // to make sure we only propagate on the last TOB5 hit check the next entry isn't also in TOB5
         // to avoid bias, make sure the TOB5 hit is valid (an invalid hit on TOB5 could only exist with a valid hit on TOB6)
         const auto nextId = (itm + 1 != TMeas.end()) ? (itm + 1)->recHit()->geographicalId() : DetId{};  // null if last
 
         if (TKlayers == 9 && theInHit->isValid() && !((!nextId.null()) && (::checkLayer(nextId.rawId(), tTopo) == 9))) {
           //      if ( TKlayers==9 && itm==TMeas.rbegin()) {
           //      if ( TKlayers==9 && (itm==TMeas.back()) ) {     // to check for only the last entry in the trajectory for propagation
           const DetLayer* tob6 = measTracker.geometricSearchTracker()->tobLayers().back();
           const LayerMeasurements theLayerMeasurements{measTracker, *measurementTrackerEvent};
           const TrajectoryStateOnSurface tsosTOB5 = itm->updatedState();
           const auto tmp = theLayerMeasurements.measurements(*tob6, tsosTOB5, prop, chi2Estimator);
 
           if (!tmp.empty()) {
             LogDebug("SiStripHitEfficiencyWorker") << "size of TM from propagation = " << tmp.size();
 
             // take the last of the TMs, which is always an invalid hit
             // if no detId is available, ie detId==0, then no compatible layer was crossed
             // otherwise, use that TM for the efficiency measurement
             const auto& tob6TM = tmp.back();
             const auto& tob6Hit = tob6TM.recHit();
             if (tob6Hit->geographicalId().rawId() != 0) {
               LogDebug("SiStripHitEfficiencyWorker") << "tob6 hit actually being added to TM vector";
               TMs.emplace_back(tob6TM, tTopo, tkgeom, propagator);
             }
           }
         }
 
         // same for TEC8
         if (TKlayers == 21 && theInHit->isValid() &&
             !((!nextId.null()) && (::checkLayer(nextId.rawId(), tTopo) == 21))) {
           const DetLayer* tec9pos = measTracker.geometricSearchTracker()->posTecLayers().back();
           const DetLayer* tec9neg = measTracker.geometricSearchTracker()->negTecLayers().back();
 
           const LayerMeasurements theLayerMeasurements{measTracker, *measurementTrackerEvent};
           const TrajectoryStateOnSurface tsosTEC9 = itm->updatedState();
 
           // check if track on positive or negative z
           if (!(iidd == SiStripSubdetector::TEC))
             LogDebug("SiStripHitEfficiencyWorker") << "there is a problem with TEC 9 extrapolation";
 
           //LogDebug("SiStripHitEfficiencyWorker") << " tec9 id = " << iidd << " and side = " << tTopo->tecSide(iidd) ;
           std::vector<TrajectoryMeasurement> tmp;
           if (tTopo->tecSide(iidd) == 1) {
             tmp = theLayerMeasurements.measurements(*tec9neg, tsosTEC9, prop, chi2Estimator);
             //LogDebug("SiStripHitEfficiencyWorker") << "on negative side" ;
           }
           if (tTopo->tecSide(iidd) == 2) {
             tmp = theLayerMeasurements.measurements(*tec9pos, tsosTEC9, prop, chi2Estimator);
             //LogDebug("SiStripHitEfficiencyWorker") << "on positive side" ;
           }
 
           if (!tmp.empty()) {
             // take the last of the TMs, which is always an invalid hit
             // if no detId is available, ie detId==0, then no compatible layer was crossed
             // otherwise, use that TM for the efficiency measurement
             const auto& tec9TM = tmp.back();
             const auto& tec9Hit = tec9TM.recHit();
 
             const unsigned int tec9id = tec9Hit->geographicalId().rawId();
             LogDebug("SiStripHitEfficiencyWorker")
                 << "tec9id = " << tec9id << " is Double sided = " << ::isDoubleSided(tec9id, tTopo)
                 << "  and 0x3 = " << (tec9id & 0x3);
 
             if (tec9Hit->geographicalId().rawId() != 0) {
               LogDebug("SiStripHitEfficiencyWorker") << "tec9 hit actually being added to TM vector";
               // in tec the hit can be single or doubled sided. whenever the invalid hit at the end of vector of TMs is
               // double sided it is always on the matched surface, so we need to split it into the true sensor surfaces
               if (::isDoubleSided(tec9id, tTopo)) {
                 TMs.emplace_back(tec9TM, tTopo, tkgeom, propagator, 1);
                 TMs.emplace_back(tec9TM, tTopo, tkgeom, propagator, 2);
               } else
                 TMs.emplace_back(tec9TM, tTopo, tkgeom, propagator);
             }
           }  //else LogDebug("SiStripHitEfficiencyWorker") << "tec9 tmp empty" ;
         }
 
         for (const auto& tm : TMs) {
           fillForTraj(tm,
                       tTopo,
                       tkgeom,
                       stripcpe,
                       stripQuality,
                       *fedErrorIds,
                       commonModeDigis,
                       *theClusters,
                       e.bunchCrossing(),
                       instLumi,
                       PU,
                       highPurity);
         }
         LogDebug("SiStripHitEfficiencyWorker") << "After looping over TrajAtValidHit list";
       }
       LogDebug("SiStripHitEfficiencyWorker") << "end TMeasurement loop";
     }
     LogDebug("SiStripHitEfficiencyWorker") << "end of trajectories loop";
   }
 }

◆ bookHistograms()

void SiStripHitEfficiencyWorker::bookHistograms	(	DQMStore::IBooker &	booker,
		const edm::Run &	run,
		const edm::EventSetup &	setup
	)

overrideprivatevirtual

Implements DQMEDAnalyzer.

Definition at line 246 of file SiStripHitEfficiencyWorker.cc.

References addCommonMode_, dqm::implementation::IBooker::book1D(), dqm::implementation::IBooker::book2D(), dqm::implementation::IBooker::book2I(), dqm::implementation::IBooker::bookProfile(), calibData_, dqmDir_, SiStripHitEffData::EventStats, SiStripHitEffData::FEDErrorOccupancy, dqm-mbProfile::format, h_allLayer, h_bx, h_goodLayer, h_hotcold, h_instLumi, h_layer, h_layer_vsBx, h_layer_vsCM, h_layer_vsLumi, h_layer_vsPU, h_module, h_nTracks, h_nTracksVsPU, h_PU, h_resolution, phase1PixelTopology::layer, phase1PixelTopology::layerName, Skims_PA_cff::name, nTEClayers_, l1ctLayer1_patternWriters_cff::partition, dqm::impl::MonitorElement::setAxisTitle(), dqm::impl::MonitorElement::setBinLabel(), dqm::implementation::NavigatorBase::setCurrentFolder(), singleTopDQM_cfi::setup, showRings_, AlCaHLTBitMon_QueryRunRegistry::string, tkDetMapToken_, and multiplicitycorr_cfi::yMax.

                                                                             {
   booker.setCurrentFolder(fmt::format("{}/EventInfo", dqmDir_));
   h_bx = booker.book1D("bx", "bx", 3600, 0, 3600);
   h_instLumi = booker.book1D("instLumi", "inst. lumi.", 250, 0, 25000);
   h_PU = booker.book1D("PU", "PU", 200, 0, 200);
   h_nTracks = booker.book1D("ntracks", "n.tracks;n. tracks;n.events", 500, -0.5, 499.5);
   h_nTracksVsPU = booker.bookProfile("nTracksVsPU", "n. tracks vs PU; PU; n.tracks ", 200, 0, 200, 500, -0.5, 499.5);
 
   calibData_.EventStats = booker.book2I("EventStats", "Statistics", 3, -0.5, 2.5, 1, 0, 1);
   calibData_.EventStats->setBinLabel(1, "events count", 1);
   calibData_.EventStats->setBinLabel(2, "tracks count", 1);
   calibData_.EventStats->setBinLabel(3, "measurements count", 1);
 
   booker.setCurrentFolder(dqmDir_);
   h_goodLayer = EffME1(booker.book1D("goodlayer_total", "goodlayer_total", 35, 0., 35.),
                        booker.book1D("goodlayer_found", "goodlayer_found", 35, 0., 35.));
   h_allLayer = EffME1(booker.book1D("alllayer_total", "alllayer_total", 35, 0., 35.),
                       booker.book1D("alllayer_found", "alllayer_found", 35, 0., 35.));
 
   h_layer = EffME1(
       booker.book1D(
           "layer_found", "layer_found", bounds::k_END_OF_LAYERS, 0., static_cast<float>(bounds::k_END_OF_LAYERS)),
       booker.book1D(
           "layer_total", "layer_total", bounds::k_END_OF_LAYERS, 0., static_cast<float>(bounds::k_END_OF_LAYERS)));
 
   for (int layer = 1; layer != bounds::k_END_OF_LAYERS; ++layer) {
     const auto lyrName = ::layerName(layer, showRings_, nTEClayers_);
 
     // book resolutions
     booker.setCurrentFolder(fmt::format("{}/Resolutions", dqmDir_));
     auto ihres = booker.book1D(Form("resol_layer_%i", layer), lyrName, 125, -125., 125.);
     ihres->setAxisTitle("trajX-clusX [strip unit]");
     h_resolution.push_back(ihres);
 
     // book plots vs Lumi
     booker.setCurrentFolder(fmt::format("{}/VsLumi", dqmDir_));
     h_layer_vsLumi.push_back(EffME1(booker.book1D(Form("layertotal_vsLumi_layer_%i", layer), lyrName, 100, 0, 25000),
                                     booker.book1D(Form("layerfound_vsLumi_layer_%i", layer), lyrName, 100, 0, 25000)));
 
     // book plots vs Lumi
     booker.setCurrentFolder(fmt::format("{}/VsPu", dqmDir_));
     h_layer_vsPU.push_back(EffME1(booker.book1D(Form("layertotal_vsPU_layer_%i", layer), lyrName, 45, 0, 90),
                                   booker.book1D(Form("layerfound_vsPU_layer_%i", layer), lyrName, 45, 0, 90)));
     if (addCommonMode_) {
       // book plots for common mode
       booker.setCurrentFolder(fmt::format("{}/CommonMode", dqmDir_));
       h_layer_vsCM.push_back(EffME1(booker.book1D(Form("layertotal_vsCM_layer_%i", layer), lyrName, 20, 0, 400),
                                     booker.book1D(Form("layerfound_vsCM_layer_%i", layer), lyrName, 20, 0, 400)));
     }
 
     // book plots vs Lumi
     booker.setCurrentFolder(fmt::format("{}/VsBx", dqmDir_));
     h_layer_vsBx.push_back(EffME1(
         booker.book1D(Form("totalVsBx_layer%i", layer), Form("layer %i (%s)", layer, lyrName.c_str()), 3565, 0, 3565),
         booker.book1D(Form("foundVsBx_layer%i", layer), Form("layer %i (%s)", layer, lyrName.c_str()), 3565, 0, 3565)));
 
     // book hot and cold
     booker.setCurrentFolder(fmt::format("{}/MissingHits", dqmDir_));
     if (layer <= bounds::k_LayersAtTOBEnd) {
       const bool isTIB = layer <= bounds::k_LayersAtTIBEnd;
       const auto partition = (isTIB ? "TIB" : "TOB");
       const auto yMax = (isTIB ? 100 : 120);
 
       const auto& tit =
           Form("%s%i: Map of missing hits", partition, (isTIB ? layer : layer - bounds::k_LayersAtTIBEnd));
 
       // histogram name must not contain ":" otherwise it fails upload to the GUI
       // see https://github.com/cms-DQM/dqmgui_prod/blob/af0a388e8f57c60e51111585d298aeeea943367f/src/cpp/DQM/DQMStore.cc#L56
       std::string name{tit};
       ::replaceInString(name, ":", "");
 
       auto ihhotcold = booker.book2D(name, tit, 100, -1, 361, 100, -yMax, yMax);
       ihhotcold->setAxisTitle("#phi [deg]", 1);
       ihhotcold->setBinLabel(1, "360", 1);
       ihhotcold->setBinLabel(50, "180", 1);
       ihhotcold->setBinLabel(100, "0", 1);
       ihhotcold->setAxisTitle("Global Z [cm]", 2);
       ihhotcold->setOption("colz");
       h_hotcold.push_back(ihhotcold);
     } else {
       const bool isTID = layer <= bounds::k_LayersAtTIDEnd;
       const auto partitions =
           (isTID ? std::vector<std::string>{"TIDplus", "TIDminus"} : std::vector<std::string>{"TECplus", "TECminus"});
       const auto axMax = (isTID ? 100 : 120);
       for (const auto& part : partitions) {
         // create the title by replacing the minus/plus symbols
         std::string forTitle{part};
         ::replaceInString(forTitle, "minus", "-");
         ::replaceInString(forTitle, "plus", "+");
 
         // histogram name must not contain ":" otherwise it fails upload to the GUI
         // see https://github.com/cms-DQM/dqmgui_prod/blob/af0a388e8f57c60e51111585d298aeeea943367f/src/cpp/DQM/DQMStore.cc#L56
         const auto& name = Form("%s %i Map of Missing Hits",
                                 part.c_str(),
                                 (isTID ? layer - bounds::k_LayersAtTOBEnd : layer - bounds::k_LayersAtTIDEnd));
         const auto& tit = Form("%s%i: Map of Missing Hits",
                                forTitle.c_str(),
                                (isTID ? layer - bounds::k_LayersAtTOBEnd : layer - bounds::k_LayersAtTIDEnd));
 
         auto ihhotcold = booker.book2D(name, tit, 100, -axMax, axMax, 100, -axMax, axMax);
         ihhotcold->setAxisTitle("Global Y", 1);
         ihhotcold->setBinLabel(1, "+Y", 1);
         ihhotcold->setBinLabel(50, "0", 1);
         ihhotcold->setBinLabel(100, "-Y", 1);
         ihhotcold->setAxisTitle("Global X", 2);
         ihhotcold->setBinLabel(1, "-X", 2);
         ihhotcold->setBinLabel(50, "0", 2);
         ihhotcold->setBinLabel(100, "+X", 2);
         ihhotcold->setOption("colz");
         h_hotcold.push_back(ihhotcold);
       }
     }
   }
 
   // come back to the main folder
   booker.setCurrentFolder(dqmDir_);
   const auto tkDetMapFolder = fmt::format("{}/TkDetMaps", dqmDir_);
 
   const TkDetMap* tkDetMap = &setup.getData(tkDetMapToken_);
   h_module =
       EffTkMap(std::make_unique<TkHistoMap>(tkDetMap, booker, tkDetMapFolder, "perModule_total", 0, false, true),
                std::make_unique<TkHistoMap>(tkDetMap, booker, tkDetMapFolder, "perModule_found", 0, false, true));
 
   // fill the FED Errors
   booker.setCurrentFolder(dqmDir_);
   const auto FEDErrorMapFolder = fmt::format("{}/FEDErrorTkDetMaps", dqmDir_);
   calibData_.FEDErrorOccupancy =
       std::make_unique<TkHistoMap>(tkDetMap, booker, FEDErrorMapFolder, "perModule_FEDErrors", 0, false, true);
 }

◆ fillDescriptions()

void SiStripHitEfficiencyWorker::fillDescriptions ( edm::ConfigurationDescriptions & descriptions )

static

Definition at line 1021 of file SiStripHitEfficiencyWorker.cc.

References edm::ConfigurationDescriptions::addWithDefaultLabel(), submitPVResolutionJobs::desc, and AlCaHLTBitMon_QueryRunRegistry::string.

                                                                                             {
   edm::ParameterSetDescription desc;
   desc.add<std::string>("dqmDir", "AlCaReco/SiStripHitEfficiency");
   desc.add<bool>("UseOnlyHighPurityTracks", true);
   desc.add<bool>("cutOnTracks", false);
   desc.add<bool>("useAllHitsFromTracksWithMissingHits", false);
   desc.add<bool>("useFirstMeas", false);
   desc.add<bool>("useLastMeas", false);
   desc.add<double>("ClusterTrajDist", 64.0);
   desc.add<double>("ResXSig", -1);
   desc.add<double>("StripsApvEdge", 10.0);
   desc.add<edm::InputTag>("combinatorialTracks", edm::InputTag{"generalTracks"});
   desc.add<edm::InputTag>("commonMode", edm::InputTag{"siStripDigis", "CommonMode"});
   desc.add<edm::InputTag>("lumiScalers", edm::InputTag{"scalersRawToDigi"});
   desc.add<edm::InputTag>("metadata", edm::InputTag{"onlineMetaDataDigis"});
   desc.add<edm::InputTag>("siStripClusters", edm::InputTag{"siStripClusters"});
   desc.add<edm::InputTag>("siStripDigis", edm::InputTag{"siStripDigis"});
   desc.add<edm::InputTag>("trackerEvent", edm::InputTag{"MeasurementTrackerEvent"});
   desc.add<edm::InputTag>("trajectories", edm::InputTag{"generalTracks"});
   desc.add<int>("ClusterMatchingMethod", 0);
   desc.add<int>("Layer", 0);
   desc.add<unsigned int>("trackMultiplicity", 100);
   desc.addUntracked<bool>("Debug", false);
   desc.addUntracked<bool>("ShowRings", false);
   desc.addUntracked<bool>("ShowTOB6TEC9", false);
   desc.addUntracked<bool>("addCommonMode", false);
   desc.addUntracked<bool>("addLumi", true);
   desc.addUntracked<int>("BunchCrossing", 0);
   desc.addUntracked<std::string>("BadModulesFile", "");
   descriptions.addWithDefaultLabel(desc);
 }

◆ fillForTraj()

void SiStripHitEfficiencyWorker::fillForTraj	(	const TrajectoryAtInvalidHit &	tm,
		const TrackerTopology *	tTopo,
		const TrackerGeometry *	tkgeom,
		const StripClusterParameterEstimator &	stripCPE,
		const SiStripQuality &	stripQuality,
		const DetIdCollection &	fedErrorIds,
		const edm::Handle< edm::DetSetVector< SiStripRawDigi >> &	commonModeDigis,
		const edmNew::DetSetVector< SiStripCluster > &	theClusters,
		int	bunchCrossing,
		float	instLumi,
		float	PU,
		bool	highPurity
	)

private

Definition at line 645 of file SiStripHitEfficiencyWorker.cc.

Referenced by analyze().

                                                               {
   // --> Get trajectory from combinatedStat& e
   const auto iidd = tm.monodet_id();
   LogDebug("SiStripHitEfficiencyWorker") << "setting iidd = " << iidd << " before checking efficiency and ";
 
   const auto xloc = tm.localX();
   const auto yloc = tm.localY();
 
   const auto xErr = tm.localErrorX();
   const auto yErr = tm.localErrorY();
 
   int TrajStrip = -1;
 
   // reget layer from iidd here, to account for TOB 6 and TEC 9 TKlayers being off
   const auto TKlayers = ::checkLayer(iidd, tTopo);
 
   const bool withinAcceptance =
       tm.withinAcceptance() && (!::isInBondingExclusionZone(iidd, TKlayers, yloc, yErr, tTopo));
 
   if (  // (TKlayers > 0) && // FIXME confirm this
       ((layers_ == TKlayers) ||
        (layers_ == bounds::k_LayersStart))) {  // Look at the layer not used to reconstruct the track
     LogDebug("SiStripHitEfficiencyWorker") << "Looking at layer under study";
     unsigned int ModIsBad = 2;
     unsigned int SiStripQualBad = 0;
     float commonMode = -100;
 
     // RPhi RecHit Efficiency
 
     if (!theClusters.empty()) {
       LogDebug("SiStripHitEfficiencyWorker") << "Checking clusters with size = " << theClusters.size();
       std::vector<::ClusterInfo> VCluster_info;  //fill with X residual, X residual pull, local X
       const auto idsv = theClusters.find(iidd);
       if (idsv != theClusters.end()) {
         //if (DEBUG_)      LogDebug("SiStripHitEfficiencyWorker") << "the ID from the dsv = " << dsv.id() ;
         LogDebug("SiStripHitEfficiencyWorker")
             << "found  (ClusterId == iidd) with ClusterId = " << idsv->id() << " and iidd = " << iidd;
         const auto stripdet = dynamic_cast<const StripGeomDetUnit*>(tkgeom->idToDetUnit(DetId(iidd)));
         const StripTopology& Topo = stripdet->specificTopology();
 
         float hbedge = 0.0;
         float htedge = 0.0;
         float hapoth = 0.0;
         float uylfac = 0.0;
         float uxlden = 0.0;
         if (TKlayers > bounds::k_LayersAtTOBEnd) {
           const BoundPlane& plane = stripdet->surface();
           const TrapezoidalPlaneBounds* trapezoidalBounds(
               dynamic_cast<const TrapezoidalPlaneBounds*>(&(plane.bounds())));
           std::array<const float, 4> const& parameterTrap = (*trapezoidalBounds).parameters();  // el bueno aqui
           hbedge = parameterTrap[0];
           htedge = parameterTrap[1];
           hapoth = parameterTrap[3];
           uylfac = (htedge - hbedge) / (htedge + hbedge) / hapoth;
           uxlden = 1 + yloc * uylfac;
         }
 
         // Need to know position of trajectory in strip number for selecting the right APV later
         if (TrajStrip == -1) {
           int nstrips = Topo.nstrips();
           float pitch = stripdet->surface().bounds().width() / nstrips;
           TrajStrip = xloc / pitch + nstrips / 2.0;
           // Need additionnal corrections for endcap
           if (TKlayers > bounds::k_LayersAtTOBEnd) {
             const float TrajLocXMid = xloc / (1 + (htedge - hbedge) * yloc / (htedge + hbedge) /
                                                       hapoth);  // radialy extrapolated x loc position at middle
             TrajStrip = TrajLocXMid / pitch + nstrips / 2.0;
           }
           //LogDebug("SiStripHitEfficiency")<<" Layer "<<TKlayers<<" TrajStrip: "<<nstrips<<" "<<pitch<<" "<<TrajStrip;;
         }
 
         for (const auto& clus : *idsv) {
           StripClusterParameterEstimator::LocalValues parameters = stripCPE.localParameters(clus, *stripdet);
           float res = (parameters.first.x() - xloc);
           float sigma = ::checkConsistency(parameters, xloc, xErr);
           // The consistency is probably more accurately measured with the Chi2MeasurementEstimator. To use it
           // you need a TransientTrackingRecHit instead of the cluster
           //theEstimator=       new Chi2MeasurementEstimator(30);
           //const Chi2MeasurementEstimator *theEstimator(100);
           //theEstimator->estimate(tm.tsos(), TransientTrackingRecHit);
 
           if (TKlayers > bounds::k_LayersAtTOBEnd) {
             res = parameters.first.x() - xloc / uxlden;  // radialy extrapolated x loc position at middle
             sigma = abs(res) / sqrt(parameters.second.xx() + xErr * xErr / uxlden / uxlden +
                                     yErr * yErr * xloc * xloc * uylfac * uylfac / uxlden / uxlden / uxlden / uxlden);
           }
 
           VCluster_info.emplace_back(res, sigma, parameters.first.x());
 
           LogDebug("SiStripHitEfficiencyWorker") << "Have ID match. residual = " << res << "  res sigma = " << sigma;
           //LogDebug("SiStripHitEfficiencyWorker")
           //    << "trajectory measurement compatability estimate = " << (*itm).estimate() ;
           LogDebug("SiStripHitEfficiencyWorker")
               << "hit position = " << parameters.first.x() << "  hit error = " << sqrt(parameters.second.xx())
               << "  trajectory position = " << xloc << "  traj error = " << xErr;
         }
       }
       ::ClusterInfo finalCluster{1000.0, 1000.0, 0.0};
       if (!VCluster_info.empty()) {
         LogDebug("SiStripHitEfficiencyWorker") << "found clusters > 0";
         if (VCluster_info.size() > 1) {
           //get the smallest one
           for (const auto& res : VCluster_info) {
             if (std::abs(res.xResidualPull) < std::abs(finalCluster.xResidualPull)) {
               finalCluster = res;
             }
             LogDebug("SiStripHitEfficiencyWorker")
                 << "iresidual = " << res.xResidual << "  isigma = " << res.xResidualPull
                 << "  and FinalRes = " << finalCluster.xResidual;
           }
         } else {
           finalCluster = VCluster_info[0];
         }
         VCluster_info.clear();
       }
 
       LogDebug("SiStripHitEfficiencyWorker") << "Final residual in X = " << finalCluster.xResidual << "+-"
                                              << (finalCluster.xResidual / finalCluster.xResidualPull);
       LogDebug("SiStripHitEfficiencyWorker")
           << "Checking location of trajectory: abs(yloc) = " << abs(yloc) << "  abs(xloc) = " << abs(xloc);
 
       //
       // fill ntuple varibles
 
       //if ( stripQuality->IsModuleBad(iidd) )
       if (stripQuality.getBadApvs(iidd) != 0) {
         SiStripQualBad = 1;
         LogDebug("SiStripHitEfficiencyWorker") << "strip is bad from SiStripQuality";
       } else {
         SiStripQualBad = 0;
         LogDebug("SiStripHitEfficiencyWorker") << "strip is good from SiStripQuality";
       }
 
       //check for FED-detected errors and include those in SiStripQualBad
       for (unsigned int ii = 0; ii < fedErrorIds.size(); ii++) {
         if (iidd == fedErrorIds[ii].rawId())
           SiStripQualBad = 1;
       }
 
       // CM of APV crossed by traj
       if (addCommonMode_)
         if (commonModeDigis.isValid() && TrajStrip >= 0 && TrajStrip <= 768) {
           const auto digiframe = commonModeDigis->find(iidd);
           if (digiframe != commonModeDigis->end())
             if ((unsigned)TrajStrip / sistrip::STRIPS_PER_APV < digiframe->data.size())
               commonMode = digiframe->data.at(TrajStrip / sistrip::STRIPS_PER_APV).adc();
         }
 
       LogDebug("SiStripHitEfficiencyWorker") << "before check good";
 
       if (finalCluster.xResidualPull < 999.0) {  //could make requirement on track/hit consistency, but for
         //now take anything with a hit on the module
         LogDebug("SiStripHitEfficiencyWorker")
             << "hit being counted as good " << finalCluster.xResidual << " FinalRecHit " << iidd << "   TKlayers  "
             << TKlayers << " xloc " << xloc << " yloc  " << yloc << " module " << iidd
             << "   matched/stereo/rphi = " << ((iidd & 0x3) == 0) << "/" << ((iidd & 0x3) == 1) << "/"
             << ((iidd & 0x3) == 2);
         ModIsBad = 0;
       } else {
         LogDebug("SiStripHitEfficiencyWorker")
             << "hit being counted as bad   ######### Invalid RPhi FinalResX " << finalCluster.xResidual
             << " FinalRecHit " << iidd << "   TKlayers  " << TKlayers << " xloc " << xloc << " yloc  " << yloc
             << " module " << iidd << "   matched/stereo/rphi = " << ((iidd & 0x3) == 0) << "/" << ((iidd & 0x3) == 1)
             << "/" << ((iidd & 0x3) == 2);
         ModIsBad = 1;
         LogDebug("SiStripHitEfficiencyWorker")
             << " RPhi Error " << sqrt(xErr * xErr + yErr * yErr) << " ErrorX " << xErr << " yErr " << yErr;
       }
 
       LogDebug("SiStripHitEfficiencyWorker")
           << "To avoid them staying unused: ModIsBad=" << ModIsBad << ", SiStripQualBad=" << SiStripQualBad
           << ", commonMode=" << commonMode << ", highPurity=" << highPurity
           << ", withinAcceptance=" << withinAcceptance;
 
       unsigned int layer = TKlayers;
       if (showRings_ && layer > bounds::k_LayersAtTOBEnd) {  // use rings instead of wheels
         if (layer <= bounds::k_LayersAtTIDEnd) {             // TID
           layer = bounds::k_LayersAtTOBEnd +
                   tTopo->tidRing(iidd);  // ((iidd >> 9) & 0x3);  // 3 disks and also 3 rings -> use the same container
         } else {                         // TEC
           layer = bounds::k_LayersAtTIDEnd + tTopo->tecRing(iidd);  // ((iidd >> 5) & 0x7);
         }
       }
       unsigned int layerWithSide = layer;
       if (layer > bounds::k_LayersAtTOBEnd && layer <= bounds::k_LayersAtTIDEnd) {
         const auto side = tTopo->tidSide(iidd);  //(iidd >> 13) & 0x3;  // TID
         if (side == 2)
           layerWithSide = layer + 3;
       } else if (layer > bounds::k_LayersAtTIDEnd) {
         const auto side = tTopo->tecSide(iidd);  // (iidd >> 18) & 0x3;  // TEC
         if (side == 1) {
           layerWithSide = layer + 3;
         } else if (side == 2) {
           layerWithSide = layer + 3 + (showRings_ ? 7 : 9);
         }
       }
 
       if ((bunchX_ > 0 && bunchX_ != bunchCrossing) || (!withinAcceptance) ||
           (useOnlyHighPurityTracks_ && !highPurity) ||
           (!showTOB6TEC9_ && (TKlayers == bounds::k_LayersAtTOBEnd || TKlayers == bounds::k_LayersAtTECEnd)) ||
           (badModules_.end() != badModules_.find(iidd)))
         return;
 
       const bool badquality = (SiStripQualBad == 1);
 
       //Now that we have a good event, we need to look at if we expected it or not, and the location
       //if we didn't
       //Fill the missing hit information first
       bool badflag = false;  // true for hits that are expected but not found
       if (resXSig_ < 0) {
         if (ModIsBad == 1)
           badflag = true;  // isBad set to false in the tree when resxsig<999.0
       } else {
         if (ModIsBad == 1 || finalCluster.xResidualPull > resXSig_)
           badflag = true;
       }
 
       // Conversion of positions in strip unit
       int nstrips = -9;
       float Pitch = -9.0;
       const StripGeomDetUnit* stripdet = nullptr;
       if (finalCluster.xResidualPull ==
           1000.0) {      // special treatment, no GeomDetUnit associated in some cases when no cluster found
         Pitch = 0.0205;  // maximum
         nstrips = 768;   // maximum
       } else {
         stripdet = dynamic_cast<const StripGeomDetUnit*>(tkgeom->idToDetUnit(iidd));
         const StripTopology& Topo = stripdet->specificTopology();
         nstrips = Topo.nstrips();
         Pitch = stripdet->surface().bounds().width() / Topo.nstrips();
       }
       double stripTrajMid = xloc / Pitch + nstrips / 2.0;
       double stripCluster = finalCluster.xLocal / Pitch + nstrips / 2.0;
       // For trapezoidal modules: extrapolation of x trajectory position to the y middle of the module
       //  for correct comparison with cluster position
       if (stripdet && layer > bounds::k_LayersAtTOBEnd) {
         const auto& trapezoidalBounds = dynamic_cast<const TrapezoidalPlaneBounds&>(stripdet->surface().bounds());
         std::array<const float, 4> const& parameters = trapezoidalBounds.parameters();
         const float hbedge = parameters[0];
         const float htedge = parameters[1];
         const float hapoth = parameters[3];
         const float TrajLocXMid = xloc / (1 + (htedge - hbedge) * yloc / (htedge + hbedge) /
                                                   hapoth);  // radialy extrapolated x loc position at middle
         stripTrajMid = TrajLocXMid / Pitch + nstrips / 2.0;
       }
 
       if ((!badquality) && (layer < h_resolution.size())) {
         LogDebug("SiStripHitEfficiencyWorker")
             << "layer " << layer << " vector index " << layer - 1 << " before filling h_resolution" << std::endl;
         h_resolution[layer - 1]->Fill(finalCluster.xResidualPull != 1000.0 ? stripTrajMid - stripCluster : 1000);
       }
 
       // New matching methods
       if (clusterMatchingMethod_ >= 1) {
         badflag = false;
         if (finalCluster.xResidualPull == 1000.0) {
           LogDebug("SiStripHitEfficiencyWorker") << "Marking bad for resxsig=1000";
           badflag = true;
         } else {
           if (clusterMatchingMethod_ == 2 || clusterMatchingMethod_ == 4) {
             // check the distance between cluster and trajectory position
             if (std::abs(stripCluster - stripTrajMid) > clusterTracjDist_) {
               LogDebug("SiStripHitEfficiencyWorker") << "Marking bad for cluster-to-traj distance";
               badflag = true;
             }
           }
           if (clusterMatchingMethod_ == 3 || clusterMatchingMethod_ == 4) {
             // cluster and traj have to be in the same APV (don't take edges into accounts)
             const int tapv = (int)stripTrajMid / sistrip::STRIPS_PER_APV;
             const int capv = (int)stripCluster / sistrip::STRIPS_PER_APV;
             float stripInAPV = stripTrajMid - tapv * sistrip::STRIPS_PER_APV;
             if (stripInAPV < stripsApvEdge_ || stripInAPV > sistrip::STRIPS_PER_APV - stripsApvEdge_) {
               LogDebug("SiStripHitEfficiencyWorker") << "Too close to the edge: " << stripInAPV;
               return;
             }
             if (tapv != capv) {
               LogDebug("SiStripHitEfficiencyWorker") << "Marking bad for tapv!=capv";
               badflag = true;
             }
           }
         }
       }
       if (!badquality) {
         LogDebug("SiStripHitEfficiencyWorker")
             << "Filling measurement for " << iidd << " in layer " << layer << " histograms with bx=" << bunchCrossing
             << ", lumi=" << instLumi << ", PU=" << PU << "; bad flag=" << badflag;
 
         // hot/cold maps of hits that are expected but not found
         if (badflag) {
           if (layer > bounds::k_LayersStart && layer <= bounds::k_LayersAtTIBEnd) {
             //We are in the TIB
             float phi = ::calcPhi(tm.globalX(), tm.globalY());
             h_hotcold[layer - 1]->Fill(360. - phi, tm.globalZ(), 1.);
           } else if (layer > bounds::k_LayersAtTIBEnd && layer <= bounds::k_LayersAtTOBEnd) {
             //We are in the TOB
             float phi = ::calcPhi(tm.globalX(), tm.globalY());
             h_hotcold[layer - 1]->Fill(360. - phi, tm.globalZ(), 1.);
           } else if (layer > bounds::k_LayersAtTOBEnd && layer <= bounds::k_LayersAtTIDEnd) {
             //We are in the TID
             //There are 2 different maps here
             int side = tTopo->tidSide(iidd);
             if (side == 1)
               h_hotcold[(layer - 1) + (layer - 11)]->Fill(-tm.globalY(), tm.globalX(), 1.);
             else if (side == 2)
               h_hotcold[(layer - 1) + (layer - 10)]->Fill(-tm.globalY(), tm.globalX(), 1.);
           } else if (layer > bounds::k_LayersAtTIDEnd) {
             //We are in the TEC
             //There are 2 different maps here
             int side = tTopo->tecSide(iidd);
             if (side == 1)
               h_hotcold[(layer + 2) + (layer - 14)]->Fill(-tm.globalY(), tm.globalX(), 1.);
             else if (side == 2)
               h_hotcold[(layer + 2) + (layer - 13)]->Fill(-tm.globalY(), tm.globalX(), 1.);
           }
         }
 
         LogDebug("SiStripHitEfficiencyWorker")
             << "layer " << layer << " vector index " << layer - 1 << " before filling h_layer_vsSmthg" << std::endl;
         h_layer_vsBx[layer - 1].fill(bunchCrossing, !badflag);
         if (addLumi_) {
           h_layer_vsLumi[layer - 1].fill(instLumi, !badflag);
           h_layer_vsPU[layer - 1].fill(PU, !badflag);
         }
         if (addCommonMode_) {
           h_layer_vsCM[layer - 1].fill(commonMode, !badflag);
         }
         h_goodLayer.fill(layerWithSide, !badflag);
       }
       // efficiency without bad modules excluded
       h_allLayer.fill(layerWithSide, !badflag);
 
       // efficiency without bad modules excluded
       if (TKlayers) {
         h_module.fill(iidd, !badflag);
       }
 
       /* Used in SiStripHitEffFromCalibTree:
        * run              -> "run"              -> run              // e.id().run()
        * event            -> "event"            -> evt              // e.id().event()
        * ModIsBad         -> "ModIsBad"         -> isBad
        * SiStripQualBad   -> "SiStripQualBad""  -> quality
        * Id               -> "Id"               -> id               // iidd
        * withinAcceptance -> "withinAcceptance" -> accept
        * whatlayer        -> "layer"            -> layer_wheel      // Tklayers
        * highPurity       -> "highPurity"       -> highPurity
        * TrajGlbX         -> "TrajGlbX"         -> x                // tm.globalX()
        * TrajGlbY         -> "TrajGlbY"         -> y                // tm.globalY()
        * TrajGlbZ         -> "TrajGlbZ"         -> z                // tm.globalZ()
        * ResXSig          -> "ResXSig"          -> resxsig          // finalCluster.xResidualPull;
        * TrajLocX         -> "TrajLocX"         -> TrajLocX         // xloc
        * TrajLocY         -> "TrajLocY"         -> TrajLocY         // yloc
        * ClusterLocX      -> "ClusterLocX"      -> ClusterLocX      // finalCluster.xLocal
        * bunchx           -> "bunchx"           -> bx               // e.bunchCrossing()
        * instLumi         -> "instLumi"         -> instLumi         ## if addLumi_
        * PU               -> "PU"               -> PU               ## if addLumi_
        * commonMode       -> "commonMode"       -> CM               ## if addCommonMode_ / _useCM
        */
       LogDebug("SiStripHitEfficiencyWorker") << "after good location check";
     }
     LogDebug("SiStripHitEfficiencyWorker") << "after list of clusters";
   }
   LogDebug("SiStripHitEfficiencyWorker") << "After layers=TKLayers if with TKlayers=" << TKlayers
                                          << ", layers=" << layers_;
 }