#include <CSCCathodeLCTProcessor.h>

Inheritance diagram for CSCCathodeLCTProcessor:

Public Member Functions
void	clear ()

	CSCCathodeLCTProcessor (unsigned endcap, unsigned station, unsigned sector, unsigned subsector, unsigned chamber, const edm::ParameterSet &conf)

std::vector< CSCShowerDigi >	getAllShower () const

CSCCLCTDigi	getBestCLCT (int bx) const

std::vector< CSCCLCTDigi >	getCLCTs () const

CSCCLCTDigi	getSecondCLCT (int bx) const

std::vector< int >	preTriggerBXs () const

std::vector< CSCCLCTPreTriggerDigi >	preTriggerDigis () const

std::vector< CSCCLCTDigi >	readoutCLCTs () const

std::vector< CSCShowerDigi >	readoutShower () const

std::vector< CSCCLCTDigi >	run (const CSCComparatorDigiCollection *compdc)

void	run (const std::vector< int > halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER])

void	setConfigParameters (const CSCDBL1TPParameters *conf)

void	setESLookupTables (const CSCL1TPLookupTableCCLUT *conf)

	~CSCCathodeLCTProcessor () override=default

Public Member Functions inherited from CSCBaseboard
	CSCBaseboard (unsigned endcap, unsigned station, unsigned sector, unsigned subsector, unsigned chamber, const edm::ParameterSet &conf)

	CSCBaseboard ()

std::string	getCSCName () const

CSCDetId	id () const

void	setCSCGeometry (const CSCGeometry *g)

virtual	~CSCBaseboard ()=default

Protected Member Functions
void	checkConfigParameters ()

void	cleanComparatorContainer (CSCCLCTDigi &lct) const

void	clearPreTriggers ()

CSCCLCTDigi	constructCLCT (const int bx, const unsigned halfstrip_withstagger, const CSCCLCTDigi::ComparatorContainer &hits)

CSCCLCTPreTriggerDigi	constructPreCLCT (const int bx, const unsigned halfstrip, const unsigned index) const

void	dumpConfigParams () const

void	dumpDigis (const std::vector< int > strip[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER]) const

void	encodeHighMultiplicityBits ()

virtual std::vector< CSCCLCTDigi >	findLCTs (const std::vector< int > halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER])

bool	getDigis (const CSCComparatorDigiCollection *compdc)

void	getDigis (const CSCComparatorDigiCollection *compdc, const CSCDetId &id)

void	markBusyKeys (const int best_hstrip, const int best_patid, int quality[CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER])

bool	patternFinding (const unsigned int bx_time, std::map< int, std::map< int, CSCCLCTDigi::ComparatorContainer > > &hits_in_patterns)

virtual bool	preTrigger (const int start_bx, int &first_bx)

void	pulseExtension (const std::vector< int > time[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER])

void	readComparatorDigis (std::vector< int > halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER])

void	setDefaultConfigParameters ()

Protected Member Functions inherited from CSCBaseboard
void	checkConfigParameters (unsigned int &var, const unsigned int var_max, const unsigned int var_def, const std::string &var_str)

Protected Attributes
unsigned int	best_pid [CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER]

CSCCLCTDigi	bestCLCT [CSCConstants::MAX_CLCT_TBINS]

CSCShowerDigi	cathode_showers_ [CSCConstants::MAX_CLCT_TBINS]

std::unique_ptr< ComparatorCodeLUT >	cclut_

CSCPatternBank::LCTPatterns	clct_pattern_ = {}

std::vector< CSCComparatorDigi >	digiV [CSCConstants::NUM_LAYERS]

unsigned int	drift_delay

int	early_tbins

unsigned int	fifo_pretrig

unsigned int	fifo_tbins

unsigned int	hit_persist

bool	ispretrig_ [CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER]

unsigned	maxbx_readout_

unsigned int	min_separation

unsigned	minbx_readout_

unsigned	minLayersCentralTBin_

unsigned int	nhits [CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER]

unsigned int	nplanes_hit_pattern

unsigned int	nplanes_hit_pretrig

int	numCFEBs_

int	numHalfStrips_

int	numStrips_

bool	peakCheck_

unsigned int	pid_thresh_pretrig

PulseArray	pulse_

std::unique_ptr< LCTQualityControl >	qualityControl_

bool	readout_earliest_2

CSCCLCTDigi	secondCLCT [CSCConstants::MAX_CLCT_TBINS]

unsigned	showerNumTBins_

int	stagger [CSCConstants::NUM_LAYERS]

int	start_bx_shift

std::vector< int >	thePreTriggerBXs

std::vector< CSCCLCTPreTriggerDigi >	thePreTriggerDigis

std::vector< unsigned >	thresholds_

unsigned int	tmb_l1a_window_size

Protected Attributes inherited from CSCBaseboard
edm::ParameterSet	alctParams_

edm::ParameterSet	clctParams_

edm::ParameterSet	commonParams_

const CSCChamber *	cscChamber_

const CSCGeometry *	cscGeometry_

CSCDetId	cscId_

bool	disableME1a_

bool	enableAlctPhase2_

bool	gangedME1a_

int	infoV

bool	isME11_

bool	isME12_

bool	isME13_

bool	isME21_

bool	isME22_

bool	isME31_

bool	isME32_

bool	isME41_

bool	isME42_

bool	run3_

bool	runCCLUT_

bool	runCCLUT_OTMB_

bool	runCCLUT_TMB_

bool	runME11ILT_

bool	runME11Up_

bool	runME21ILT_

bool	runME21Up_

bool	runME31Up_

bool	runME41Up_

bool	runPhase2_

edm::ParameterSet	showerParams_

unsigned	theChamber

std::string	theCSCName_

const unsigned	theEndcap

int	theRegion

unsigned	theRing

const unsigned	theSector

const unsigned	theStation

const unsigned	theSubsector

const unsigned	theTrigChamber

edm::ParameterSet	tmbParams_

Static Protected Attributes
static const unsigned int	def_drift_delay = 2

static const unsigned int	def_fifo_pretrig = 7

static const unsigned int	def_fifo_tbins = 12

static const unsigned int	def_hit_persist = 6

static const unsigned int	def_min_separation = 10

static const unsigned int	def_nplanes_hit_pattern = 4

static const unsigned int	def_nplanes_hit_pretrig = 2

static const unsigned int	def_pid_thresh_pretrig = 2

static const unsigned int	def_tmb_l1a_window_size = 7

Detailed Description

This class simulates the functionality of the cathode LCT card. It is run by the MotherBoard and returns up to two CathodeLCTs. It can be run either in a test mode, where it is passed arrays of halfstrip times, or in normal mode where it determines the time and comparator information from the comparator digis.

The CathodeLCTs only come halfstrip flavors

Date: May 2001 Removed the card boundaries. Changed the Pretrigger to emulate the hardware electronic logic. Also changed the keylayer to be the 4th layer in a chamber instead of the 3rd layer from the interaction region. The code is a more realistic simulation of hardware LCT logic now. -Jason Mumford.

Author: Benn Tannenbaum UCLA 13 July 1999 benn@.nosp@m.phys.nosp@m.ics.u.nosp@m.cla..nosp@m.edu Numerous later improvements by Jason Mumford and Slava Valuev (see cvs in ORCA). Porting from ORCA by S. Valuev (Slava.nosp@m..Val.nosp@m.uev@c.nosp@m.ern..nosp@m.ch), May 2006.

Updates for high pileup running by Vadim Khotilovich (TAMU), December 2012

Updates for integrated local trigger with GEMs by Sven Dildick (TAMU) and Tao Huang (TAMU), April 2015

Removing usage of outdated class CSCTriggerGeometry by Sven Dildick (TAMU)

Definition at line 44 of file CSCCathodeLCTProcessor.h.

Constructor & Destructor Documentation

◆ CSCCathodeLCTProcessor()

CSCCathodeLCTProcessor::CSCCathodeLCTProcessor	(	unsigned	endcap,
		unsigned	station,
		unsigned	sector,
		unsigned	subsector,
		unsigned	chamber,
		const edm::ParameterSet &	conf
	)

Normal constructor.

Definition at line 21 of file CSCCathodeLCTProcessor.cc.

References cms::cuda::assert(), cclut_, relativeConstraints::chamber, checkConfigParameters(), CSCConstants::CLCT_EMUL_TIME_OFFSET, clct_pattern_, CSCPatternBank::clct_pattern_legacy_, CSCPatternBank::clct_pattern_run3_, CSCBaseboard::clctParams_, drift_delay, dumpConfigParams(), early_tbins, makeMuonMisalignmentScenario::endcap, fifo_pretrig, fifo_tbins, edm::ParameterSet::getParameter(), edm::ParameterSet::getParameterSet(), hit_persist, CSCBaseboard::infoV, CSCConstants::LCT_CENTRAL_BX, maxbx_readout_, min_separation, minbx_readout_, minLayersCentralTBin_, nplanes_hit_pattern, nplanes_hit_pretrig, CSCConstants::NUM_LAYERS, numStrips_, peakCheck_, pid_thresh_pretrig, qualityControl_, readout_earliest_2, CSCBaseboard::runCCLUT_, showerNumTBins_, CSCBaseboard::showerParams_, stagger, start_bx_shift, relativeConstraints::station, thePreTriggerDigis, thresholds_, tmb_l1a_window_size, and CSCBaseboard::tmbParams_.

     : CSCBaseboard(endcap, station, sector, subsector, chamber, conf) {
   static std::atomic<bool> config_dumped{false};
 
   // CLCT configuration parameters.
   fifo_tbins = clctParams_.getParameter<unsigned int>("clctFifoTbins");
   hit_persist = clctParams_.getParameter<unsigned int>("clctHitPersist");
   drift_delay = clctParams_.getParameter<unsigned int>("clctDriftDelay");
   nplanes_hit_pretrig = clctParams_.getParameter<unsigned int>("clctNplanesHitPretrig");
   nplanes_hit_pattern = clctParams_.getParameter<unsigned int>("clctNplanesHitPattern");
 
   // Not used yet.
   fifo_pretrig = clctParams_.getParameter<unsigned int>("clctFifoPretrig");
 
   pid_thresh_pretrig = clctParams_.getParameter<unsigned int>("clctPidThreshPretrig");
   min_separation = clctParams_.getParameter<unsigned int>("clctMinSeparation");
 
   start_bx_shift = clctParams_.getParameter<int>("clctStartBxShift");
 
   // Motherboard parameters: common for all configurations.
   tmb_l1a_window_size =  // Common to CLCT and TMB
       tmbParams_.getParameter<unsigned int>("tmbL1aWindowSize");
 
   /*
     In Summer 2021 the CLCT readout function was updated so that the
     window is based on a number of time bins around the central CLCT
     time BX7. In the past the window was based on early_tbins and late_tbins.
     The parameter is kept, but is not used.
   */
   early_tbins = tmbParams_.getParameter<int>("tmbEarlyTbins");
   if (early_tbins < 0)
     early_tbins = fifo_pretrig - CSCConstants::CLCT_EMUL_TIME_OFFSET;
 
   // wether to readout only the earliest two LCTs in readout window
   readout_earliest_2 = tmbParams_.getParameter<bool>("tmbReadoutEarliest2");
 
   // Verbosity level, set to 0 (no print) by default.
   infoV = clctParams_.getParameter<int>("verbosity");
 
   // Do not exclude pattern 0 and 1 when the Run-3 patterns are enabled!!
   // Valid Run-3 patterns are 0,1,2,3,4
   if (runCCLUT_) {
     pid_thresh_pretrig = 0;
   }
 
   // Check and print configuration parameters.
   checkConfigParameters();
   if ((infoV > 0) && !config_dumped) {
     dumpConfigParams();
     config_dumped = true;
   }
 
   numStrips_ = 0;  // Will be set later.
   // Provisional, but should be OK for all stations except ME1.
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
     if ((i_layer + 1) % 2 == 0)
       stagger[i_layer] = 0;
     else
       stagger[i_layer] = 1;
   }
 
   // which patterns should we use?
   if (runCCLUT_) {
     clct_pattern_ = CSCPatternBank::clct_pattern_run3_;
     // comparator code lookup table algorithm for Phase-2
     cclut_ = std::make_unique<ComparatorCodeLUT>(conf);
   } else {
     clct_pattern_ = CSCPatternBank::clct_pattern_legacy_;
   }
 
   const auto& shower = showerParams_.getParameterSet("cathodeShower");
   thresholds_ = shower.getParameter<std::vector<unsigned>>("showerThresholds");
   showerNumTBins_ = shower.getParameter<unsigned>("showerNumTBins");
   minLayersCentralTBin_ = shower.getParameter<unsigned>("minLayersCentralTBin");
   peakCheck_ = shower.getParameter<bool>("peakCheck");
   minbx_readout_ = CSCConstants::LCT_CENTRAL_BX - tmb_l1a_window_size / 2;
   maxbx_readout_ = CSCConstants::LCT_CENTRAL_BX + tmb_l1a_window_size / 2;
   assert(tmb_l1a_window_size / 2 <= CSCConstants::LCT_CENTRAL_BX);
 
   thePreTriggerDigis.clear();
 
   // quality control of stubs
   qualityControl_ = std::make_unique<LCTQualityControl>(endcap, station, sector, subsector, chamber, conf);
 }

◆ ~CSCCathodeLCTProcessor()

CSCCathodeLCTProcessor::~CSCCathodeLCTProcessor ( )

overridedefault

Default destructor.

Member Function Documentation

◆ checkConfigParameters()

void CSCCathodeLCTProcessor::checkConfigParameters ( )

protected

Make sure that the parameter values are within the allowed range.

Definition at line 151 of file CSCCathodeLCTProcessor.cc.

References cms::cuda::assert(), CSCBaseboard::checkConfigParameters(), def_drift_delay, def_fifo_pretrig, def_fifo_tbins, def_hit_persist, def_min_separation, def_nplanes_hit_pattern, def_nplanes_hit_pretrig, def_pid_thresh_pretrig, def_tmb_l1a_window_size, drift_delay, fifo_pretrig, fifo_tbins, hit_persist, CSCConstants::LCT_CENTRAL_BX, CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER, min_separation, nplanes_hit_pattern, nplanes_hit_pretrig, pid_thresh_pretrig, and tmb_l1a_window_size.

Referenced by CSCCathodeLCTProcessor(), and setConfigParameters().

                                                    {
   // Make sure that the parameter values are within the allowed range.
 
   // Max expected values.
   static const unsigned int max_fifo_tbins = 1 << 5;
   static const unsigned int max_fifo_pretrig = 1 << 5;
   static const unsigned int max_hit_persist = 1 << 4;
   static const unsigned int max_drift_delay = 1 << 2;
   static const unsigned int max_nplanes_hit_pretrig = 1 << 3;
   static const unsigned int max_nplanes_hit_pattern = 1 << 3;
   static const unsigned int max_pid_thresh_pretrig = 1 << 4;
   static const unsigned int max_min_separation = CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER;
   static const unsigned int max_tmb_l1a_window_size = 1 << 4;
 
   // Checks.
   CSCBaseboard::checkConfigParameters(fifo_tbins, max_fifo_tbins, def_fifo_tbins, "fifo_tbins");
   CSCBaseboard::checkConfigParameters(fifo_pretrig, max_fifo_pretrig, def_fifo_pretrig, "fifo_pretrig");
   CSCBaseboard::checkConfigParameters(hit_persist, max_hit_persist, def_hit_persist, "hit_persist");
   CSCBaseboard::checkConfigParameters(drift_delay, max_drift_delay, def_drift_delay, "drift_delay");
   CSCBaseboard::checkConfigParameters(
       nplanes_hit_pretrig, max_nplanes_hit_pretrig, def_nplanes_hit_pretrig, "nplanes_hit_pretrig");
   CSCBaseboard::checkConfigParameters(
       nplanes_hit_pattern, max_nplanes_hit_pattern, def_nplanes_hit_pattern, "nplanes_hit_pattern");
   CSCBaseboard::checkConfigParameters(
       pid_thresh_pretrig, max_pid_thresh_pretrig, def_pid_thresh_pretrig, "pid_thresh_pretrig");
   CSCBaseboard::checkConfigParameters(min_separation, max_min_separation, def_min_separation, "min_separation");
   CSCBaseboard::checkConfigParameters(
       tmb_l1a_window_size, max_tmb_l1a_window_size, def_tmb_l1a_window_size, "tmb_l1a_window_size");
   assert(tmb_l1a_window_size / 2 <= CSCConstants::LCT_CENTRAL_BX);
 }

◆ cleanComparatorContainer()

void CSCCathodeLCTProcessor::cleanComparatorContainer ( CSCCLCTDigi & lct ) const

protected

Definition at line 1021 of file CSCCathodeLCTProcessor.cc.

References CSCCLCTDigi::getHits(), mps_fire::i, CSCConstants::INVALID_HALF_STRIP, AlCaHLTBitMon_ParallelJobs::p, and CSCCLCTDigi::setHits().

Referenced by constructCLCT().

                                                                              {
   CSCCLCTDigi::ComparatorContainer newHits = clct.getHits();
   for (auto& p : newHits) {
     p.erase(
         std::remove_if(p.begin(), p.end(), [](unsigned i) -> bool { return i == CSCConstants::INVALID_HALF_STRIP; }),
         p.end());
   }
   clct.setHits(newHits);
 }

◆ clear()

void CSCCathodeLCTProcessor::clear ( void )

Clears the LCT containers.

Definition at line 182 of file CSCCathodeLCTProcessor.cc.

References bestCLCT, simKBmtfDigis_cfi::bx, cathode_showers_, CSCShowerDigi::clear(), CSCCLCTDigi::clear(), CSCConstants::MAX_CLCT_TBINS, secondCLCT, thePreTriggerBXs, and thePreTriggerDigis.

                                    {
   thePreTriggerDigis.clear();
   thePreTriggerBXs.clear();
   for (int bx = 0; bx < CSCConstants::MAX_CLCT_TBINS; bx++) {
     bestCLCT[bx].clear();
     secondCLCT[bx].clear();
     cathode_showers_[bx].clear();
   }
 }

◆ clearPreTriggers()

void CSCCathodeLCTProcessor::clearPreTriggers ( )

protected

Definition at line 1015 of file CSCCathodeLCTProcessor.cc.

References ispretrig_, CSCConstants::KEY_CLCT_LAYER, numHalfStrips_, and stagger.

Referenced by CSCUpgradeCathodeLCTProcessor::findLCTs(), CSCUpgradeCathodeLCTProcessor::preTrigger(), and preTrigger().

                                               {
   for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER - 1]; hstrip < numHalfStrips_; hstrip++) {
     ispretrig_[hstrip] = false;
   }
 }

◆ constructCLCT()

CSCCLCTDigi CSCCathodeLCTProcessor::constructCLCT	(	const int	bx,
		const unsigned	halfstrip_withstagger,
		const CSCCLCTDigi::ComparatorContainer &	hits
	)

protected

Definition at line 962 of file CSCCathodeLCTProcessor.cc.

References best_pid, simKBmtfDigis_cfi::bx, cclut_, clct_pattern_, cleanComparatorContainer(), CSCPatternBank::getPatternBend(), hfClusterShapes_cfi::hits, CSCBaseboard::infoV, CSCConstants::KEY_CLCT_LAYER, CSCCLCTDigi::Legacy, LogTrace, nhits, CSCConstants::NUM_HALF_STRIPS_PER_CFEB, numCFEBs_, topSingleLeptonDQM_PU_cfi::pattern, quality, CSCBaseboard::runCCLUT_, CSCCLCTDigi::setHits(), and stagger.

Referenced by CSCUpgradeCathodeLCTProcessor::findLCTs(), and findLCTs().

                                                                                               {
   // Assign the CLCT properties
   const unsigned quality = nhits[halfstrip_withstagger];
   const unsigned pattern = best_pid[halfstrip_withstagger];
   const unsigned bend = CSCPatternBank::getPatternBend(clct_pattern_[pattern]);
   const unsigned keyhalfstrip = halfstrip_withstagger - stagger[CSCConstants::KEY_CLCT_LAYER - 1];
   const unsigned cfeb = keyhalfstrip / CSCConstants::NUM_HALF_STRIPS_PER_CFEB;
   const unsigned halfstrip = keyhalfstrip % CSCConstants::NUM_HALF_STRIPS_PER_CFEB;
 
   // set the Run-2 properties
   CSCCLCTDigi clct(1,
                    quality,
                    pattern,
                    // CLCTs are always of type halfstrip (not strip or distrip)
                    1,
                    bend,
                    halfstrip,
                    cfeb,
                    bx,
                    0,
                    0,
                    -1,
                    CSCCLCTDigi::Version::Legacy);
 
   // set the hit collection
   clct.setHits(hits);
 
   // do the CCLUT procedures for Run-3
   if (runCCLUT_) {
     cclut_->run(clct, numCFEBs_);
   }
 
   // purge the comparator digi collection from the obsolete "65535" entries...
   cleanComparatorContainer(clct);
 
   if (infoV > 1) {
     LogTrace("CSCCathodeLCTProcessor") << "Produce CLCT " << clct << std::endl;
   }
 
   return clct;
 }

◆ constructPreCLCT()

CSCCLCTPreTriggerDigi CSCCathodeLCTProcessor::constructPreCLCT	(	const int	bx,
		const unsigned	halfstrip,
		const unsigned	index
	)		const

protected

Definition at line 1006 of file CSCCathodeLCTProcessor.cc.

References best_pid, clct_pattern_, CSCConstants::CLCT_PATTERN_WIDTH, nhits, CSCConstants::NUM_HALF_STRIPS_PER_CFEB, and CSCConstants::NUM_LAYERS.

Referenced by CSCUpgradeCathodeLCTProcessor::preTrigger(), and preTrigger().

                                                                                                   {
   const int bend = clct_pattern_[best_pid[hstrip]][CSCConstants::NUM_LAYERS - 1][CSCConstants::CLCT_PATTERN_WIDTH];
   const int halfstrip = hstrip % CSCConstants::NUM_HALF_STRIPS_PER_CFEB;
   const int cfeb = hstrip / CSCConstants::NUM_HALF_STRIPS_PER_CFEB;
   return CSCCLCTPreTriggerDigi(1, nhits[hstrip], best_pid[hstrip], 1, bend, halfstrip, cfeb, bx_time, nPreTriggers, 0);
 }

◆ dumpConfigParams()

void CSCCathodeLCTProcessor::dumpConfigParams ( ) const

protected

Dump CLCT configuration parameters.

Definition at line 1035 of file CSCCathodeLCTProcessor.cc.

References drift_delay, fifo_pretrig, fifo_tbins, hit_persist, LogDebug, min_separation, nplanes_hit_pattern, nplanes_hit_pretrig, and pid_thresh_pretrig.

Referenced by CSCCathodeLCTProcessor(), run(), and setConfigParameters().

                                                     {
   std::ostringstream strm;
   strm << "\n";
   strm << "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n";
   strm << "+                  CLCT configuration parameters:                  +\n";
   strm << "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n";
   strm << " fifo_tbins   [total number of time bins in DAQ readout] = " << fifo_tbins << "\n";
   strm << " fifo_pretrig [start time of cathode raw hits in DAQ readout] = " << fifo_pretrig << "\n";
   strm << " hit_persist  [duration of signal pulse, in 25 ns bins] = " << hit_persist << "\n";
   strm << " drift_delay  [time after pre-trigger before TMB latches LCTs] = " << drift_delay << "\n";
   strm << " nplanes_hit_pretrig [min. number of layers hit for pre-trigger] = " << nplanes_hit_pretrig << "\n";
   strm << " nplanes_hit_pattern [min. number of layers hit for trigger] = " << nplanes_hit_pattern << "\n";
   strm << " pid_thresh_pretrig [lower threshold on pattern id] = " << pid_thresh_pretrig << "\n";
   strm << " min_separation     [region of busy key strips] = " << min_separation << "\n";
   strm << "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n";
   LogDebug("CSCCathodeLCTProcessor") << strm.str();
 }

◆ dumpDigis()

void CSCCathodeLCTProcessor::dumpDigis ( const std::vector< int > strip[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER] ) const

protected

Dump half-strip digis

Definition at line 1054 of file CSCCathodeLCTProcessor.cc.

References TauDecayModes::dec, relativeConstraints::empty, LogDebug, LogTrace, CSCConstants::NUM_HALF_STRIPS_PER_CFEB, CSCConstants::NUM_LAYERS, numHalfStrips_, digitizers_cfi::strip, and CSCBaseboard::theCSCName_.

Referenced by CSCUpgradeCathodeLCTProcessor::findLCTs(), and findLCTs().

                                                                                                             {
   LogDebug("CSCCathodeLCTProcessor") << theCSCName_ << " strip type: half-strip,  numHalfStrips " << numHalfStrips_;
 
   std::ostringstream strstrm;
   for (int i_strip = 0; i_strip < numHalfStrips_; i_strip++) {
     if (i_strip % 10 == 0) {
       if (i_strip < 100)
         strstrm << i_strip / 10;
       else
         strstrm << (i_strip - 100) / 10;
     } else
       strstrm << " ";
     if ((i_strip + 1) % CSCConstants::NUM_HALF_STRIPS_PER_CFEB == 0)
       strstrm << " ";
   }
   strstrm << "\n";
   for (int i_strip = 0; i_strip < numHalfStrips_; i_strip++) {
     strstrm << i_strip % 10;
     if ((i_strip + 1) % CSCConstants::NUM_HALF_STRIPS_PER_CFEB == 0)
       strstrm << " ";
   }
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
     strstrm << "\n";
     for (int i_strip = 0; i_strip < numHalfStrips_; i_strip++) {
       if (!strip[i_layer][i_strip].empty()) {
         std::vector<int> bx_times = strip[i_layer][i_strip];
         // Dump only the first in time.
         strstrm << std::hex << bx_times[0] << std::dec;
       } else {
         strstrm << "-";
       }
       if ((i_strip + 1) % CSCConstants::NUM_HALF_STRIPS_PER_CFEB == 0)
         strstrm << " ";
     }
   }
   LogTrace("CSCCathodeLCTProcessor") << strstrm.str();
 }

◆ encodeHighMultiplicityBits()

void CSCCathodeLCTProcessor::encodeHighMultiplicityBits ( )

protected

Definition at line 1226 of file CSCCathodeLCTProcessor.cc.

References simKBmtfDigis_cfi::bx, cathode_showers_, digiV, spr::find(), mps_fire::i, CSCDetId::iChamberType(), CSCConstants::MAX_CLCT_TBINS, minLayersCentralTBin_, CSCConstants::NUM_LAYERS, or, peakCheck_, showerNumTBins_, findQualityFiles::size, CSCBaseboard::theRing, CSCBaseboard::theStation, CSCBaseboard::theTrigChamber, and thresholds_.

Referenced by run().

                                                         {
   //inTimeHMT_ = 0;
 
   //numer of layer with hits and number of hits for 0-15 BXs
   std::set<unsigned> layersWithHits[CSCConstants::MAX_CLCT_TBINS];
   unsigned hitsInTime[CSCConstants::MAX_CLCT_TBINS];
   // Calculate layers with hits
   for (unsigned bx = 0; bx < CSCConstants::MAX_CLCT_TBINS; bx++) {
     hitsInTime[bx] = 0;
     for (unsigned i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
       bool atLeastOneCompHit = false;
       for (const auto& compdigi : digiV[i_layer]) {
         std::vector<int> bx_times = compdigi.getTimeBinsOn();
         // there is at least one comparator digi in this bx
         if (std::find(bx_times.begin(), bx_times.end(), bx) != bx_times.end()) {
           hitsInTime[bx] += 1;
           atLeastOneCompHit = true;
         }
       }
       // add this layer to the number of layers hit
       if (atLeastOneCompHit) {
         layersWithHits[bx].insert(i_layer);
       }
     }
   }  //end of full bx loop
 
   // convert station and ring number to index
   // index runs from 2 to 10, subtract 2
   unsigned csc_idx = CSCDetId::iChamberType(theStation, theRing) - 2;
 
   // loose, nominal and tight
   std::vector<unsigned> station_thresholds = {
       thresholds_[csc_idx * 3], thresholds_[csc_idx * 3 + 1], thresholds_[csc_idx * 3 + 2]};
 
   //hard coded dead time as 2Bx, since showerNumTBins = 3, like firmware
   // for example, nhits = 0 at bx7; = 100 at bx8; = 0 at bx9
   //cathode HMT must be triggered at bx8, not bx7 and bx9
   //meanwhile we forced 2BX dead time after active shower trigger
   unsigned int deadtime =
       showerNumTBins_ - 1;  // firmware hard coded dead time as 2Bx, since showerNumTBins = 3 in firmware
   unsigned int dead_count = 0;
 
   for (unsigned bx = 0; bx < CSCConstants::MAX_CLCT_TBINS; bx++) {
     unsigned minbx = bx >= showerNumTBins_ / 2 ? bx - showerNumTBins_ / 2 : bx;
     unsigned maxbx = bx < CSCConstants::MAX_CLCT_TBINS - showerNumTBins_ / 2 ? bx + showerNumTBins_ / 2
                                                                              : CSCConstants::MAX_CLCT_TBINS - 1;
     unsigned this_hitsInTime = 0;
     bool isPeak = true;  //check whether total hits in bx is peak of nhits over time bins
     /*following is to count number of hits over [minbx, maxbx], showerNumTBins=3 =>[n-1, n+1]*/
     for (unsigned mbx = minbx; mbx <= maxbx; mbx++) {
       this_hitsInTime += hitsInTime[mbx];
     }
 
     if (peakCheck_ and bx < CSCConstants::MAX_CLCT_TBINS - showerNumTBins_ / 2 - 1) {
       if (hitsInTime[minbx] < hitsInTime[maxbx + 1] or
           (hitsInTime[minbx] == hitsInTime[maxbx + 1] and hitsInTime[bx] < hitsInTime[bx + 1]))
         isPeak = false;  //next bx would have more hits or in the center
     }
     bool dead_status = dead_count > 0;
     if (dead_status)
       dead_count--;
 
     unsigned this_inTimeHMT = 0;
     // require at least nLayersWithHits for the central time bin
     // do nothing if there are not enough layers with hits
     if (layersWithHits[bx].size() >= minLayersCentralTBin_ and !dead_status and isPeak) {
       // assign the bits
       if (!station_thresholds.empty()) {
         for (int i = station_thresholds.size() - 1; i >= 0; i--) {
           if (this_hitsInTime >= station_thresholds[i]) {
             this_inTimeHMT = i + 1;
             dead_count = deadtime;
             break;
           }
         }
       }
     }
     //CLCTshower constructor with showerType_ = 2, wirehits = 0;
     cathode_showers_[bx] = CSCShowerDigi(
         this_inTimeHMT, false, theTrigChamber, bx, CSCShowerDigi::ShowerType::kCLCTShower, 0, this_hitsInTime);
   }
 }

◆ findLCTs()

std::vector< CSCCLCTDigi > CSCCathodeLCTProcessor::findLCTs ( const std::vector< int > halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER] )

protectedvirtual

Reimplemented in CSCUpgradeCathodeLCTProcessor.

Definition at line 532 of file CSCCathodeLCTProcessor.cc.

References best_pid, simKBmtfDigis_cfi::bx, constructCLCT(), drift_delay, dumpDigis(), fifo_tbins, CSCCLCTDigi::getKeyStrip(), CSCCLCTDigi::getPattern(), CSCCLCTDigi::getQuality(), CSCCLCTDigi::getRun3Pattern(), CSCBaseboard::infoV, CSCCLCTDigi::isValid(), CSCConstants::KEY_CLCT_LAYER, LogTrace, markBusyKeys(), CSCConstants::MAX_CLCTS_PER_PROCESSOR, CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER, nhits, nplanes_hit_pattern, nplanes_hit_pretrig, numHalfStrips_, patternFinding(), preTrigger(), pulseExtension(), quality, CSCBaseboard::runCCLUT_, stagger, start_bx_shift, and thePreTriggerBXs.

Referenced by CSCUpgradeCathodeLCTProcessor::findLCTs(), and run().

                                                                                                           {
   std::vector<CSCCLCTDigi> lctList;
 
   if (infoV > 1)
     dumpDigis(halfstrip);
 
   // Fire half-strip one-shots for hit_persist bx's (4 bx's by default).
   pulseExtension(halfstrip);
 
   unsigned int start_bx = start_bx_shift;
   // Stop drift_delay bx's short of fifo_tbins since at later bx's we will
   // not have a full set of hits to start pattern search anyway.
   unsigned int stop_bx = fifo_tbins - drift_delay;
   // Allow for more than one pass over the hits in the time window.
   while (start_bx < stop_bx) {
     // temp CLCT objects
     CSCCLCTDigi tempBestCLCT;
     CSCCLCTDigi tempSecondCLCT;
 
     // All half-strip pattern envelopes are evaluated simultaneously, on every
     // clock cycle.
     int first_bx = 999;
     bool pre_trig = preTrigger(start_bx, first_bx);
 
     // If any of half-strip envelopes has enough layers hit in it, TMB
     // will pre-trigger.
     if (pre_trig) {
       thePreTriggerBXs.push_back(first_bx);
       if (infoV > 1)
         LogTrace("CSCCathodeLCTProcessor") << "..... pretrigger at bx = " << first_bx << "; waiting drift delay .....";
 
       // TMB latches LCTs drift_delay clocks after pretrigger.
       // in the configuration the drift_delay is set to 2bx by default
       // this is the time that is required for the electrons to drift to the
       // cathode strips. 15ns drift time --> 45 ns is 3 sigma for the delay
       // this corresponds to 2bx
       int latch_bx = first_bx + drift_delay;
 
       // define a new pattern map
       // for each key half strip, and for each pattern, store the 2D collection of fired comparator digis
       std::map<int, std::map<int, CSCCLCTDigi::ComparatorContainer>> hits_in_patterns;
       hits_in_patterns.clear();
 
       // We check if there is at least one key half strip for which at least
       // one pattern id has at least the minimum number of hits
       bool hits_in_time = patternFinding(latch_bx, hits_in_patterns);
       if (infoV > 1) {
         if (hits_in_time) {
           for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER - 1]; hstrip < numHalfStrips_; hstrip++) {
             if (nhits[hstrip] > 0) {
               LogTrace("CSCCathodeLCTProcessor")
                   << " bx = " << std::setw(2) << latch_bx << " --->"
                   << " halfstrip = " << std::setw(3) << hstrip << " best pid = " << std::setw(2) << best_pid[hstrip]
                   << " nhits = " << nhits[hstrip];
             }
           }
         }
       }
       // This trigger emulator does not have an active CFEB flag for DAQ (csc trigger hardware: AFF)
       // This is a fundamental difference with the firmware where the TMB prepares the DAQ to
       // read out the chamber
 
       // The pattern finder runs continuously, so another pre-trigger
       // could occur already at the next bx.
 
       // Quality for sorting.
       int quality[CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER];
       int best_halfstrip[CSCConstants::MAX_CLCTS_PER_PROCESSOR];
       int best_quality[CSCConstants::MAX_CLCTS_PER_PROCESSOR];
 
       for (int ilct = 0; ilct < CSCConstants::MAX_CLCTS_PER_PROCESSOR; ilct++) {
         best_halfstrip[ilct] = -1;
         best_quality[ilct] = 0;
       }
 
       // Calculate quality from pattern id and number of hits, and
       // simultaneously select best-quality LCT.
       if (hits_in_time) {
         for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER - 1]; hstrip < numHalfStrips_; hstrip++) {
           // The bend-direction bit pid[0] is ignored (left and right
           // bends have equal quality).
           quality[hstrip] = (best_pid[hstrip] & 14) | (nhits[hstrip] << 5);
           if (quality[hstrip] > best_quality[0]) {
             best_halfstrip[0] = hstrip;
             best_quality[0] = quality[hstrip];
           }
           // temporary alias
           const int best_hs(best_halfstrip[0]);
           // construct a CLCT if the trigger condition has been met
           if (best_hs >= 0 && nhits[best_hs] >= nplanes_hit_pattern) {
             // overwrite the current best CLCT
             tempBestCLCT = constructCLCT(first_bx, best_hs, hits_in_patterns[best_hs][best_pid[best_hs]]);
           }
         }
       }
 
       // If 1st best CLCT is found, look for the 2nd best.
       if (best_halfstrip[0] >= 0) {
         // Get the half-strip of the best CLCT in this BX that was put into the list.
         // You do need to re-add the any stagger, because the busy keys are based on
         // the pulse array which takes into account strip stagger!!!
         const unsigned halfStripBestCLCT(tempBestCLCT.getKeyStrip() + stagger[CSCConstants::KEY_CLCT_LAYER - 1]);
 
         // Mark keys near best CLCT as busy by setting their quality to
         // zero, and repeat the search.
         markBusyKeys(halfStripBestCLCT, best_pid[halfStripBestCLCT], quality);
 
         for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER - 1]; hstrip < numHalfStrips_; hstrip++) {
           if (quality[hstrip] > best_quality[1]) {
             best_halfstrip[1] = hstrip;
             best_quality[1] = quality[hstrip];
           }
           // temporary alias
           const int best_hs(best_halfstrip[1]);
           // construct a CLCT if the trigger condition has been met
           if (best_hs >= 0 && nhits[best_hs] >= nplanes_hit_pattern) {
             // overwrite the current second best CLCT
             tempSecondCLCT = constructCLCT(first_bx, best_hs, hits_in_patterns[best_hs][best_pid[best_hs]]);
           }
         }
 
         // Sort bestCLCT and secondALCT by quality
         // if qualities are the same, sort by run-2 or run-3 pattern
         // if qualities and patterns are the same, sort by half strip number
         bool changeOrder = false;
 
         unsigned qualityBest = 0, qualitySecond = 0;
         unsigned patternBest = 0, patternSecond = 0;
         unsigned halfStripBest = 0, halfStripSecond = 0;
 
         if (tempBestCLCT.isValid() and tempSecondCLCT.isValid()) {
           qualityBest = tempBestCLCT.getQuality();
           qualitySecond = tempSecondCLCT.getQuality();
           if (!runCCLUT_) {
             patternBest = tempBestCLCT.getPattern();
             patternSecond = tempSecondCLCT.getPattern();
           } else {
             patternBest = tempBestCLCT.getRun3Pattern();
             patternSecond = tempSecondCLCT.getRun3Pattern();
           }
           halfStripBest = tempBestCLCT.getKeyStrip();
           halfStripSecond = tempSecondCLCT.getKeyStrip();
 
           if (qualitySecond > qualityBest)
             changeOrder = true;
           else if ((qualitySecond == qualityBest) and (int(patternSecond / 2) > int(patternBest / 2)))
             changeOrder = true;
           else if ((qualitySecond == qualityBest) and (int(patternSecond / 2) == int(patternBest / 2)) and
                    (halfStripSecond < halfStripBest))
             changeOrder = true;
         }
 
         CSCCLCTDigi tempCLCT;
         if (changeOrder) {
           tempCLCT = tempBestCLCT;
           tempBestCLCT = tempSecondCLCT;
           tempSecondCLCT = tempCLCT;
         }
 
         // add the CLCTs to the collection
         if (tempBestCLCT.isValid()) {
           lctList.push_back(tempBestCLCT);
         }
         if (tempSecondCLCT.isValid()) {
           lctList.push_back(tempSecondCLCT);
         }
       }  //find CLCT, end of best_halfstrip[0] >= 0
 
       // If there is a trigger, CLCT pre-trigger state machine
       // checks the number of hits that lie within a pattern template
       // at every bx, and waits for it to drop below threshold.
       // The search for CLCTs resumes only when the number of hits
       // drops below threshold.
       start_bx = fifo_tbins;
       // Stop checking drift_delay bx's short of fifo_tbins since
       // at later bx's we won't have a full set of hits for a
       // pattern search anyway.
       unsigned int stop_time = fifo_tbins - drift_delay;
       for (unsigned int bx = latch_bx + 1; bx < stop_time; bx++) {
         bool return_to_idle = true;
         bool hits_in_time = patternFinding(bx, hits_in_patterns);
         if (hits_in_time) {
           for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER - 1]; hstrip < numHalfStrips_; hstrip++) {
             // the dead-time is done at the pre-trigger, not at the trigger
             if (nhits[hstrip] >= nplanes_hit_pretrig) {
               if (infoV > 1)
                 LogTrace("CSCCathodeLCTProcessor") << " State machine busy at bx = " << bx;
               return_to_idle = false;
               break;
             }
           }
         }
         if (return_to_idle) {
           if (infoV > 1)
             LogTrace("CSCCathodeLCTProcessor") << " State machine returns to idle state at bx = " << bx;
           start_bx = bx;
           break;
         }
       }
     }  //pre_trig
     else {
       start_bx = first_bx + 1;  // no dead time
     }
   }
 
   return lctList;
 }  // findLCTs -- TMB-07 version.

◆ getAllShower()

std::vector< CSCShowerDigi > CSCCathodeLCTProcessor::getAllShower ( ) const

return vector of CSCShower digi

Definition at line 1212 of file CSCCathodeLCTProcessor.cc.

References cathode_showers_, and CSCConstants::MAX_CLCT_TBINS.

                                                                     {
   std::vector<CSCShowerDigi> vshowers(cathode_showers_, cathode_showers_ + CSCConstants::MAX_CLCT_TBINS);
   return vshowers;
 };

◆ getBestCLCT()

CSCCLCTDigi CSCCathodeLCTProcessor::getBestCLCT ( int bx ) const

get best/second best CLCT Note: CLCT has BX shifted

Definition at line 1199 of file CSCCathodeLCTProcessor.cc.

References CSCConstants::ALCT_CLCT_OFFSET, bestCLCT, simKBmtfDigis_cfi::bx, CSCCLCTDigi::getBX(), and CSCCLCTDigi::setBX().

                                                             {
   CSCCLCTDigi lct = bestCLCT[bx];
   lct.setBX(lct.getBX() + CSCConstants::ALCT_CLCT_OFFSET);
   return lct;
 }

◆ getCLCTs()

std::vector< CSCCLCTDigi > CSCCathodeLCTProcessor::getCLCTs ( ) const

Returns vector of all found CLCTs, if any.

Definition at line 1183 of file CSCCathodeLCTProcessor.cc.

References bestCLCT, simKBmtfDigis_cfi::bx, sistrip::SpyUtilities::isValid(), CSCConstants::MAX_CLCT_TBINS, and secondCLCT.

Referenced by readoutCLCTs(), and run().

                                                               {
   std::vector<CSCCLCTDigi> tmpV;
   for (int bx = 0; bx < CSCConstants::MAX_CLCT_TBINS; bx++) {
     if (bestCLCT[bx].isValid())
       tmpV.push_back(bestCLCT[bx]);
     if (secondCLCT[bx].isValid())
       tmpV.push_back(secondCLCT[bx]);
   }
   return tmpV;
 }

◆ getDigis() [1/2]

bool CSCCathodeLCTProcessor::getDigis ( const CSCComparatorDigiCollection * compdc )

protected

Access routines to comparator digis.

Definition at line 391 of file CSCCathodeLCTProcessor.cc.

References CSCDetId::chamberName(), digiV, CSCBaseboard::disableME1a_, relativeConstraints::empty, CSCBaseboard::infoV, CSCBaseboard::isME11_, LogTrace, CSCConstants::NUM_LAYERS, CSCBaseboard::theChamber, CSCBaseboard::theEndcap, CSCBaseboard::theRing, CSCBaseboard::theSector, CSCBaseboard::theStation, CSCBaseboard::theSubsector, and CSCBaseboard::theTrigChamber.

Referenced by run().

                                                                                {
   bool hasDigis = false;
 
   // Loop over layers and save comparator digis on each one into digiV[layer].
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
     digiV[i_layer].clear();
 
     CSCDetId detid(theEndcap, theStation, theRing, theChamber, i_layer + 1);
     getDigis(compdc, detid);
 
     if (isME11_ && !disableME1a_) {
       CSCDetId detid_me1a(theEndcap, theStation, 4, theChamber, i_layer + 1);
       getDigis(compdc, detid_me1a);
     }
 
     if (!digiV[i_layer].empty()) {
       hasDigis = true;
       if (infoV > 1) {
         LogTrace("CSCCathodeLCTProcessor") << "found " << digiV[i_layer].size() << " comparator digi(s) in layer "
                                            << i_layer << " of " << detid.chamberName() << " (trig. sector " << theSector
                                            << " subsector " << theSubsector << " id " << theTrigChamber << ")";
       }
     }
   }
 
   return hasDigis;
 }

◆ getDigis() [2/2]

void CSCCathodeLCTProcessor::getDigis	(	const CSCComparatorDigiCollection *	compdc,
		const CSCDetId &	id
	)

protected

Definition at line 419 of file CSCCathodeLCTProcessor.cc.

References digiV, CSCBaseboard::disableME1a_, CSCBaseboard::gangedME1a_, CSCConstants::NUM_STRIPS_ME1A_GANGED, CSCConstants::NUM_STRIPS_ME1A_UNGANGED, CSCConstants::NUM_STRIPS_ME1B, and relativeConstraints::ring.

                                                                                                    {
   const bool me1a = (id.station() == 1) && (id.ring() == 4);
   const CSCComparatorDigiCollection::Range rcompd = compdc->get(id);
   for (CSCComparatorDigiCollection::const_iterator digiIt = rcompd.first; digiIt != rcompd.second; ++digiIt) {
     const unsigned int origStrip = digiIt->getStrip();
     const unsigned int maxStripsME1a =
         gangedME1a_ ? CSCConstants::NUM_STRIPS_ME1A_GANGED : CSCConstants::NUM_STRIPS_ME1A_UNGANGED;
     // this special case can only be reached in MC
     // in real data, the comparator digis have always ring==1
     if (me1a && origStrip <= maxStripsME1a && !disableME1a_) {
       // Move ME1/A comparators from CFEB=0 to CFEB=4 if this has not
       // been done already.
       CSCComparatorDigi digi_corr(
           origStrip + CSCConstants::NUM_STRIPS_ME1B, digiIt->getComparator(), digiIt->getTimeBinWord());
       digiV[id.layer() - 1].push_back(digi_corr);
     } else {
       digiV[id.layer() - 1].push_back(*digiIt);
     }
   }
 }

◆ getSecondCLCT()

CSCCLCTDigi CSCCathodeLCTProcessor::getSecondCLCT ( int bx ) const

Definition at line 1205 of file CSCCathodeLCTProcessor.cc.

References CSCConstants::ALCT_CLCT_OFFSET, simKBmtfDigis_cfi::bx, CSCCLCTDigi::getBX(), secondCLCT, and CSCCLCTDigi::setBX().

                                                               {
   CSCCLCTDigi lct = secondCLCT[bx];
   lct.setBX(lct.getBX() + CSCConstants::ALCT_CLCT_OFFSET);
   return lct;
 }

◆ markBusyKeys()

void CSCCathodeLCTProcessor::markBusyKeys	(	const int	best_hstrip,
		const int	best_patid,
		int	quality[CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER]
	)

protected

Definition at line 949 of file CSCCathodeLCTProcessor.cc.

References CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER, min_separation, and quality.

Referenced by CSCUpgradeCathodeLCTProcessor::findLCTs(), and findLCTs().

                                                                                                      {
   int nspan = min_separation;
   int pspan = min_separation;
 
   for (int hstrip = best_hstrip - nspan; hstrip <= best_hstrip + pspan; hstrip++) {
     if (hstrip >= 0 && hstrip < CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER) {
       quality[hstrip] = 0;
     }
   }
 }  // markBusyKeys -- TMB-07 version.

◆ patternFinding()

bool CSCCathodeLCTProcessor::patternFinding	(	const unsigned int	bx_time,
		std::map< int, std::map< int, CSCCLCTDigi::ComparatorContainer > > &	hits_in_patterns
	)

protected

Definition at line 842 of file CSCCathodeLCTProcessor.cc.

References best_pid, clct_pattern_, CSCPatternBank::clct_pattern_offset_, CSCConstants::CLCT_PATTERN_WIDTH, fifo_tbins, hit_persist, CSCBaseboard::infoV, CSCConstants::INVALID_HALF_STRIP, PulseArray::isOneShotHighAtBX(), CSCConstants::KEY_CLCT_LAYER, LogTrace, nhits, nplanes_hit_pattern, nplanes_hit_pretrig, CSCConstants::NUM_LAYERS, PulseArray::numberOfLayersAtBX(), numHalfStrips_, AlCaHLTBitMon_ParallelJobs::p, pid_thresh_pretrig, pulse_, and stagger.

Referenced by CSCUpgradeCathodeLCTProcessor::findLCTs(), findLCTs(), CSCUpgradeCathodeLCTProcessor::preTrigger(), and preTrigger().

                                                                                                             {
   if (bx_time >= fifo_tbins)
     return false;
 
   unsigned layers_hit = pulse_.numberOfLayersAtBX(bx_time);
   if (layers_hit < nplanes_hit_pretrig)
     return false;
 
   for (int key_hstrip = 0; key_hstrip < numHalfStrips_; key_hstrip++) {
     best_pid[key_hstrip] = 0;
     nhits[key_hstrip] = 0;
   }
 
   bool hit_layer[CSCConstants::NUM_LAYERS];
 
   // Loop over candidate key strips.
   for (int key_hstrip = stagger[CSCConstants::KEY_CLCT_LAYER - 1]; key_hstrip < numHalfStrips_; key_hstrip++) {
     // Loop over patterns and look for hits matching each pattern.
     for (unsigned int pid = clct_pattern_.size() - 1; pid >= pid_thresh_pretrig and pid < clct_pattern_.size(); pid--) {
       layers_hit = 0;
       // clear all layers
       for (int ilayer = 0; ilayer < CSCConstants::NUM_LAYERS; ilayer++) {
         hit_layer[ilayer] = false;
       }
 
       // clear a single pattern!
       CSCCLCTDigi::ComparatorContainer hits_single_pattern;
       hits_single_pattern.resize(6);
       for (auto& p : hits_single_pattern) {
         p.resize(CSCConstants::CLCT_PATTERN_WIDTH, CSCConstants::INVALID_HALF_STRIP);
       }
 
       // clear all medians
       double num_pattern_hits = 0., times_sum = 0.;
       std::multiset<int> mset_for_median;
       mset_for_median.clear();
 
       // Loop over halfstrips in trigger pattern mask and calculate the
       // "absolute" halfstrip number for each.
       for (int this_layer = 0; this_layer < CSCConstants::NUM_LAYERS; this_layer++) {
         for (int strip_num = 0; strip_num < CSCConstants::CLCT_PATTERN_WIDTH; strip_num++) {
           // ignore "0" half-strips in the pattern
           if (clct_pattern_[pid][this_layer][strip_num] == 0)
             continue;
 
           // the current strip is the key half-strip plus the offset (can be negative or positive)
           int this_strip = CSCPatternBank::clct_pattern_offset_[strip_num] + key_hstrip;
 
           // current strip should be valid of course
           if (this_strip >= 0 && this_strip < numHalfStrips_) {
             if (infoV > 3) {
               LogTrace("CSCCathodeLCTProcessor") << " In patternFinding: key_strip = " << key_hstrip << " pid = " << pid
                                                  << " layer = " << this_layer << " strip = " << this_strip << std::endl;
             }
             // Determine if "one shot" is high at this bx_time
             if (pulse_.isOneShotHighAtBX(this_layer, this_strip, bx_time)) {
               if (hit_layer[this_layer] == false) {
                 hit_layer[this_layer] = true;
                 layers_hit++;  // determines number of layers hit
                 // add this strip in this layer to the pattern we are currently considering
                 hits_single_pattern[this_layer][strip_num] = this_strip - stagger[this_layer];
               }
 
               // find at what bx did pulse on this halsfstrip & layer have started
               // use hit_persist constraint on how far back we can go
               int first_bx_layer = bx_time;
               for (unsigned int dbx = 0; dbx < hit_persist; dbx++) {
                 if (pulse_.isOneShotHighAtBX(this_layer, this_strip, first_bx_layer - 1))
                   first_bx_layer--;
                 else
                   break;
               }
               times_sum += (double)first_bx_layer;
               num_pattern_hits += 1.;
               mset_for_median.insert(first_bx_layer);
               if (infoV > 2)
                 LogTrace("CSCCathodeLCTProcessor") << " 1st bx in layer: " << first_bx_layer << " sum bx: " << times_sum
                                                    << " #pat. hits: " << num_pattern_hits;
             }
           }
         }  // end loop over strips in pretrigger pattern
       }    // end loop over layers
 
       // save the pattern information when a trigger was formed!
       if (layers_hit >= nplanes_hit_pattern) {
         hits_in_patterns[key_hstrip][pid] = hits_single_pattern;
       }
 
       // determine the current best pattern!
       if (layers_hit > nhits[key_hstrip]) {
         best_pid[key_hstrip] = pid;
         nhits[key_hstrip] = layers_hit;
         // Do not loop over the other (worse) patterns if max. numbers of
         // hits is found.
         if (nhits[key_hstrip] == CSCConstants::NUM_LAYERS)
           break;
       }
     }  // end loop over pid
   }    // end loop over candidate key strips
 
   // At this point there exists at least one halfstrip for which at least one pattern
   // has at least 3 layers --> definition of a pre-trigger
   return true;
 }  // patternFinding -- TMB-07 version.

◆ preTrigger()

bool CSCCathodeLCTProcessor::preTrigger	(	const int	start_bx,
		int &	first_bx
	)

protectedvirtual

Reimplemented in CSCUpgradeCathodeLCTProcessor.

Definition at line 783 of file CSCCathodeLCTProcessor.cc.

References best_pid, clearPreTriggers(), constructPreCLCT(), fifo_tbins, CSCBaseboard::infoV, ispretrig_, CSCConstants::KEY_CLCT_LAYER, LogTrace, nhits, nplanes_hit_pretrig, numHalfStrips_, patternFinding(), pid_thresh_pretrig, stagger, and thePreTriggerDigis.

Referenced by findLCTs(), and CSCUpgradeCathodeLCTProcessor::preTrigger().

                                                                          {
   if (infoV > 1)
     LogTrace("CSCCathodeLCTProcessor") << "....................PreTrigger...........................";
 
   int nPreTriggers = 0;
 
   bool pre_trig = false;
   // Now do a loop over bx times to see (if/when) track goes over threshold
   for (unsigned int bx_time = start_bx; bx_time < fifo_tbins; bx_time++) {
     // For any given bunch-crossing, start at the lowest keystrip and look for
     // the number of separate layers in the pattern for that keystrip that have
     // pulses at that bunch-crossing time.  Do the same for the next keystrip,
     // etc.  Then do the entire process again for the next bunch-crossing, etc
     // until you find a pre-trigger.
 
     std::map<int, std::map<int, CSCCLCTDigi::ComparatorContainer>> hits_in_patterns;
     hits_in_patterns.clear();
 
     bool hits_in_time = patternFinding(bx_time, hits_in_patterns);
     if (hits_in_time) {
       // clear the pretriggers
       clearPreTriggers();
 
       for (int hstrip = stagger[CSCConstants::KEY_CLCT_LAYER - 1]; hstrip < numHalfStrips_; hstrip++) {
         // check the properties of the pattern on this halfstrip
         if (infoV > 1) {
           if (nhits[hstrip] > 0) {
             LogTrace("CSCCathodeLCTProcessor")
                 << " bx = " << std::setw(2) << bx_time << " --->"
                 << " halfstrip = " << std::setw(3) << hstrip << " best pid = " << std::setw(2) << best_pid[hstrip]
                 << " nhits = " << nhits[hstrip];
           }
         }
         // a pretrigger was found
         if (nhits[hstrip] >= nplanes_hit_pretrig && best_pid[hstrip] >= pid_thresh_pretrig) {
           pre_trig = true;
           ispretrig_[hstrip] = true;
 
           // write each pre-trigger to output
           nPreTriggers++;
           thePreTriggerDigis.push_back(constructPreCLCT(bx_time, hstrip, nPreTriggers));
         }
       }
 
       // upon the first pretrigger, we save first BX and exit
       if (pre_trig) {
         first_bx = bx_time;  // bx at time of pretrigger
         return true;
       }
     }
   }  // end loop over bx times
 
   if (infoV > 1)
     LogTrace("CSCCathodeLCTProcessor") << "no pretrigger, returning \n";
   first_bx = fifo_tbins;
   return false;
 }  // preTrigger -- TMB-07 version.

◆ preTriggerBXs()

std::vector<int> CSCCathodeLCTProcessor::preTriggerBXs ( ) const

inline

Definition at line 84 of file CSCCathodeLCTProcessor.h.

References thePreTriggerBXs.

84 { return thePreTriggerBXs; }

CSCCathodeLCTProcessor::thePreTriggerBXs

std::vector< int > thePreTriggerBXs

Definition: CSCCathodeLCTProcessor.h:190

◆ preTriggerDigis()

std::vector<CSCCLCTPreTriggerDigi> CSCCathodeLCTProcessor::preTriggerDigis ( ) const

inline

read out CLCTs in ME1a , ME1b

Definition at line 87 of file CSCCathodeLCTProcessor.h.

References thePreTriggerDigis.

87 { return thePreTriggerDigis; }

CSCCathodeLCTProcessor::thePreTriggerDigis

std::vector< CSCCLCTPreTriggerDigi > thePreTriggerDigis

Definition: CSCCathodeLCTProcessor.h:191

◆ pulseExtension()

void CSCCathodeLCTProcessor::pulseExtension ( const std::vector< int > time[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER] )

protected

Definition at line 742 of file CSCCathodeLCTProcessor.cc.

References PulseArray::bitsInPulse(), PulseArray::clear(), relativeConstraints::empty, PulseArray::extend(), hit_persist, mps_fire::i, CSCBaseboard::infoV, CSCConstants::NUM_LAYERS, numHalfStrips_, pulse_, start_bx_shift, and protons_cff::time.

Referenced by CSCUpgradeCathodeLCTProcessor::findLCTs(), and findLCTs().

                                                                                                      {
   const unsigned bits_in_pulse = pulse_.bitsInPulse();
 
   // Clear pulse array.  This array will be used as a bit representation of
   // hit times.  For example: if strip[1][2] has a value of 3, then 1 shifted
   // left 3 will be bit pattern of pulse[1][2].  This would make the pattern
   // look like 0000000000001000.  Then add on additional bits to signify
   // the duration of a signal (hit_persist, formerly bx_width) to simulate
   // the TMB's drift delay.  So for the same pulse[1][2] with a hit_persist
   // of 3 would look like 0000000000111000.  This is similating the digital
   // one-shot in the TMB.
   pulse_.clear();
 
   // Loop over all layers and halfstrips.
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
     for (int i_strip = 0; i_strip < numHalfStrips_; i_strip++) {
       // If there is a hit, simulate digital one-shot persistence starting
       // in the bx of the initial hit.  Fill this into pulse[][].
       if (!time[i_layer][i_strip].empty()) {
         std::vector<int> bx_times = time[i_layer][i_strip];
         for (unsigned int i = 0; i < bx_times.size(); i++) {
           // Check that min and max times are within the allowed range.
           if (bx_times[i] < 0 || bx_times[i] + hit_persist >= bits_in_pulse) {
             if (infoV > 0)
               edm::LogWarning("L1CSCTPEmulatorOutOfTimeDigi")
                   << "+++ BX time of comparator digi (halfstrip = " << i_strip << " layer = " << i_layer
                   << ") bx = " << bx_times[i] << " is not within the range (0-" << bits_in_pulse
                   << "] allowed for pulse extension.  Skip this digi! +++\n";
             continue;
           }
           if (bx_times[i] >= start_bx_shift) {
             pulse_.extend(i_layer, i_strip, bx_times[i], hit_persist);
           }
         }
       }
     }
   }
 }  // pulseExtension.

◆ readComparatorDigis()

void CSCCathodeLCTProcessor::readComparatorDigis ( std::vector< int > halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER] )

protected

Definition at line 440 of file CSCCathodeLCTProcessor.cc.

References digiV, fifo_tbins, hit_persist, mps_fire::i, CSCBaseboard::infoV, LogTrace, CSCConstants::NUM_LAYERS, numHalfStrips_, numStrips_, stagger, CSCBaseboard::theChamber, CSCBaseboard::theRing, and CSCBaseboard::theStation.

Referenced by run().

                                                                                                     {
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
     int i_digi = 0;  // digi counter, for dumps.
     for (std::vector<CSCComparatorDigi>::iterator pld = digiV[i_layer].begin(); pld != digiV[i_layer].end();
          pld++, i_digi++) {
       // Dump raw digi info.
       if (infoV > 1) {
         std::ostringstream strstrm;
         strstrm << "Comparator digi: comparator = " << pld->getComparator() << " strip #" << pld->getStrip()
                 << " time bins on:";
         std::vector<int> bx_times = pld->getTimeBinsOn();
         for (unsigned int tbin = 0; tbin < bx_times.size(); tbin++)
           strstrm << " " << bx_times[tbin];
         LogTrace("CSCCathodeLCTProcessor") << strstrm.str();
       }
 
       // Get comparator: 0/1 for left/right halfstrip for each comparator
       // that fired.
       int thisComparator = pld->getComparator();
       if (thisComparator != 0 && thisComparator != 1) {
         if (infoV >= 0)
           edm::LogWarning("L1CSCTPEmulatorWrongInput")
               << "+++ station " << theStation << " ring " << theRing << " chamber " << theChamber
               << " Found comparator digi with wrong comparator value = " << thisComparator << "; skipping it... +++\n";
         continue;
       }
 
       // Get strip number.
       int thisStrip = pld->getStrip() - 1;  // count from 0
       if (thisStrip < 0 || thisStrip >= numStrips_) {
         if (infoV >= 0)
           edm::LogWarning("L1CSCTPEmulatorWrongInput")
               << "+++ station " << theStation << " ring " << theRing << " chamber " << theChamber
               << " Found comparator digi with wrong strip number = " << thisStrip << " (max strips = " << numStrips_
               << "); skipping it... +++\n";
         continue;
       }
       // 2*strip: convert strip to 1/2 strip
       // comp   : comparator output
       // stagger: stagger for this layer
       int thisHalfstrip = 2 * thisStrip + thisComparator + stagger[i_layer];
       if (thisHalfstrip >= numHalfStrips_) {
         if (infoV >= 0)
           edm::LogWarning("L1CSCTPEmulatorWrongInput")
               << "+++ station " << theStation << " ring " << theRing << " chamber " << theChamber
               << " Found wrong halfstrip number = " << thisHalfstrip << "; skipping this digi... +++\n";
         continue;
       }
 
       // Get bx times on this digi and check that they are within the bounds.
       std::vector<int> bx_times = pld->getTimeBinsOn();
       for (unsigned int i = 0; i < bx_times.size(); i++) {
         // Total number of time bins in DAQ readout is given by fifo_tbins,
         // which thus determines the maximum length of time interval.
         //
         // In data, only the CLCT in the time bin that was matched with L1A are read out
         // while comparator digi is read out by 12 time bin, which includes 12 time bin info
         // in other word, CLCTs emulated from comparator digis usually showed the OTMB behavior in 12 time bin
         // while CLCT from data only showed 1 time bin OTMB behavior
         // the CLCT emulated from comparator digis usually is centering at time bin 7 (BX7) and
         // it is definitly safe to ignore any CLCTs in bx 0 or 1 and those CLCTs will never impacts on any triggers
         if (bx_times[i] > 1 && bx_times[i] < static_cast<int>(fifo_tbins)) {
           if (i == 0 || (i > 0 && bx_times[i] - bx_times[i - 1] >= static_cast<int>(hit_persist))) {
             // A later hit on the same strip is ignored during the
             // number of clocks defined by the "hit_persist" parameter
             // (i.e., 6 bx's by default).
             if (infoV > 1)
               LogTrace("CSCCathodeLCTProcessor")
                   << "Comp digi: layer " << i_layer + 1 << " digi #" << i_digi + 1 << " strip " << thisStrip
                   << " halfstrip " << thisHalfstrip << " time " << bx_times[i] << " comparator " << thisComparator
                   << " stagger " << stagger[i_layer];
             halfstrip[i_layer][thisHalfstrip].push_back(bx_times[i]);
           } else if (i > 0) {
             if (infoV > 1)
               LogTrace("CSCCathodeLCTProcessor")
                   << "+++ station " << theStation << " ring " << theRing << " chamber " << theChamber
                   << " Skipping comparator digi: strip = " << thisStrip << ", layer = " << i_layer + 1
                   << ", bx = " << bx_times[i] << ", bx of previous hit = " << bx_times[i - 1];
           }
         } else {
           if (infoV > 1)
             LogTrace("CSCCathodeLCTProcessor") << "+++ station " << theStation << " ring " << theRing << " chamber "
                                                << theChamber << "+++ Skipping comparator digi: strip = " << thisStrip
                                                << ", layer = " << i_layer + 1 << ", bx = " << bx_times[i] << " +++";
         }
       }
     }
   }
 }

◆ readoutCLCTs()

std::vector< CSCCLCTDigi > CSCCathodeLCTProcessor::readoutCLCTs ( ) const

Returns vector of CLCTs in the read-out time window, if any.

Definition at line 1095 of file CSCCathodeLCTProcessor.cc.

References simKBmtfDigis_cfi::bx, CSCConstants::CLCT_CENTRAL_BX, getCLCTs(), CSCBaseboard::infoV, LogDebug, CSCConstants::MAX_CLCT_TBINS, qualityControl_, readout_earliest_2, and tmb_l1a_window_size.

                                                                   {
   // temporary container for further selection
   std::vector<CSCCLCTDigi> tmpV;
 
   /*
     CLCTs in the BX window [early_tbin,...,late_tbin] are considered good for physics
     The central CLCT BX is time bin 7.
     For tmb_l1a_window_size set to 7 (Run-1, Run-2), the window is [4, 5, 6, 7, 8, 9, 10]
     For tmb_l1a_window_size set to 5 (Run-3), the window is [5, 6, 7, 8, 9]
     For tmb_l1a_window_size set to 3 (Run-4?), the window is [6, 7, 8]
   */
   const unsigned delta_tbin = tmb_l1a_window_size / 2;
   int early_tbin = CSCConstants::CLCT_CENTRAL_BX - delta_tbin;
   int late_tbin = CSCConstants::CLCT_CENTRAL_BX + delta_tbin;
   /*
      Special case for an even-numbered time-window,
      For instance tmb_l1a_window_size set to 6: [4, 5, 6, 7, 8, 9]
   */
   if (tmb_l1a_window_size % 2 == 0)
     late_tbin = CSCConstants::CLCT_CENTRAL_BX + delta_tbin - 1;
   const int max_late_tbin = CSCConstants::MAX_CLCT_TBINS - 1;
 
   // debugging messages when early_tbin or late_tbin has a suspicious value
   if (early_tbin < 0) {
     edm::LogWarning("CSCCathodeLCTProcessor|SuspiciousParameters")
         << "Early time bin (early_tbin) smaller than minimum allowed, which is 0. set early_tbin to 0.";
     early_tbin = 0;
   }
   if (late_tbin > max_late_tbin) {
     edm::LogWarning("CSCCathodeLCTProcessor|SuspiciousParameters")
         << "Late time bin (late_tbin) larger than maximum allowed, which is " << max_late_tbin
         << ". set early_tbin to max allowed";
     late_tbin = CSCConstants::MAX_CLCT_TBINS - 1;
   }
 
   // get the valid LCTs. No BX selection is done here
   const auto& all_clcts = getCLCTs();
 
   // Start from the vector of all found CLCTs and select those within
   // the CLCT*L1A coincidence window.
   int bx_readout = -1;
   for (const auto& clct : all_clcts) {
     // only consider valid CLCTs
     if (!clct.isValid())
       continue;
 
     const int bx = clct.getBX();
     // Skip CLCTs found too early relative to L1Accept.
     if (bx < early_tbin) {
       if (infoV > 1)
         LogDebug("CSCCathodeLCTProcessor")
             << " Do not report correlated CLCT on key halfstrip " << clct.getStrip() << ": found at bx " << bx
             << ", whereas the earliest allowed bx is " << early_tbin;
       continue;
     }
 
     // Skip CLCTs found too late relative to L1Accept.
     if (bx > late_tbin) {
       if (infoV > 1)
         LogDebug("CSCCathodeLCTProcessor")
             << " Do not report correlated CLCT on key halfstrip " << clct.getStrip() << ": found at bx " << bx
             << ", whereas the latest allowed bx is " << late_tbin;
       continue;
     }
 
     // If (readout_earliest_2) take only CLCTs in the earliest bx in the read-out window:
     if (readout_earliest_2) {
       // the first CLCT passes
       // the second CLCT passes if the BX matches to the first
       if (bx_readout == -1 || bx == bx_readout) {
         tmpV.push_back(clct);
         if (bx_readout == -1)
           bx_readout = bx;
       }
     } else
       tmpV.push_back(clct);
   }
 
   // do a final check on the CLCTs in readout
   qualityControl_->checkMultiplicityBX(tmpV);
   for (const auto& clct : tmpV) {
     qualityControl_->checkValid(clct);
   }
 
   return tmpV;
 }

◆ readoutShower()

std::vector< CSCShowerDigi > CSCCathodeLCTProcessor::readoutShower ( ) const

Returns shower bits

Definition at line 1218 of file CSCCathodeLCTProcessor.cc.

References simKBmtfDigis_cfi::bx, cathode_showers_, sistrip::SpyUtilities::isValid(), maxbx_readout_, and minbx_readout_.

                                                                      {
   std::vector<CSCShowerDigi> showerOut;
   for (unsigned bx = minbx_readout_; bx < maxbx_readout_; bx++)
     if (cathode_showers_[bx].isValid())
       showerOut.push_back(cathode_showers_[bx]);
   return showerOut;
 }

◆ run() [1/2]

std::vector< CSCCLCTDigi > CSCCathodeLCTProcessor::run ( const CSCComparatorDigiCollection * compdc )

Runs the LCT processor code. Called in normal running – gets info from a collection of comparator digis.

Definition at line 192 of file CSCCathodeLCTProcessor.cc.

References CSCConstants::ALCT_CLCT_OFFSET, CSCBaseboard::cscChamber_, CSCBaseboard::disableME1a_, dumpConfigParams(), relativeConstraints::empty, encodeHighMultiplicityBits(), CSCBaseboard::gangedME1a_, CSCLayer::geometry(), getCLCTs(), getDigis(), CSCBaseboard::infoV, CSCBaseboard::isME11_, CSCChamber::layer(), CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER, CSCConstants::MAX_NUM_STRIPS_RUN1, CSCConstants::MAX_NUM_STRIPS_RUN2, nplanes_hit_pretrig, CSCConstants::NUM_LAYERS, CSCConstants::NUM_STRIPS_ME1B, CSCConstants::NUM_STRIPS_PER_CFEB, CSCLayerGeometry::numberOfStrips(), numCFEBs_, numHalfStrips_, numStrips_, or, AlCaHLTBitMon_ParallelJobs::p, qualityControl_, readComparatorDigis(), CSCLayerGeometry::stagger(), stagger, CSCBaseboard::theCSCName_, CSCBaseboard::theRing, CSCBaseboard::theSector, CSCBaseboard::theStation, CSCBaseboard::theSubsector, and CSCBaseboard::theTrigChamber.

                                                                                             {
   // This is the version of the run() function that is called when running
   // over the entire detector.  It gets the comparator & timing info from the
   // comparator digis and then passes them on to another run() function.
 
   static std::atomic<bool> config_dumped{false};
   if ((infoV > 0) && !config_dumped) {
     dumpConfigParams();
     config_dumped = true;
   }
 
   // Get the number of strips and stagger of layers for the given chamber.
   // Do it only once per chamber.
   if (numStrips_ <= 0 or numStrips_ > CSCConstants::MAX_NUM_STRIPS_RUN2) {
     if (cscChamber_) {
       numStrips_ = cscChamber_->layer(1)->geometry()->numberOfStrips();
 
       // ME1/a is known to the readout hardware as strips 65-80 of ME1/1.
       // Still need to decide whether we do any special adjustments to
       // reconstruct LCTs in this region (3:1 ganged strips); for now, we
       // simply allow for hits in ME1/a and apply standard reconstruction
       // to them.
       // For Phase2 ME1/1 is set to have 4 CFEBs in ME1/b and 3 CFEBs in ME1/a
       if (isME11_) {
         if (theRing == 4) {
           edm::LogError("CSCCathodeLCTProcessor|SetupError")
               << "+++ Invalid ring number for this processor " << theRing << " was set in the config."
               << " +++\n"
               << "+++ CSC geometry looks garbled; no emulation possible +++\n";
         }
         if (!disableME1a_ && theRing == 1 && !gangedME1a_)
           numStrips_ = CSCConstants::MAX_NUM_STRIPS_RUN2;
         if (!disableME1a_ && theRing == 1 && gangedME1a_)
           numStrips_ = CSCConstants::MAX_NUM_STRIPS_RUN1;
         if (disableME1a_ && theRing == 1)
           numStrips_ = CSCConstants::NUM_STRIPS_ME1B;
       }
 
       numHalfStrips_ = 2 * numStrips_ + 1;
       numCFEBs_ = numStrips_ / CSCConstants::NUM_STRIPS_PER_CFEB;
 
       if (numStrips_ > CSCConstants::MAX_NUM_STRIPS_RUN2) {
         edm::LogError("CSCCathodeLCTProcessor|SetupError")
             << "+++ Number of strips, " << numStrips_ << " found in " << theCSCName_ << " (sector " << theSector
             << " subsector " << theSubsector << " trig id. " << theTrigChamber << ")"
             << " exceeds max expected, " << CSCConstants::MAX_NUM_STRIPS_RUN2 << " +++\n"
             << "+++ CSC geometry looks garbled; no emulation possible +++\n";
         numStrips_ = -1;
         numHalfStrips_ = -1;
         numCFEBs_ = -1;
       }
       // The strips for a given layer may be offset from the adjacent layers.
       // This was done in order to improve resolution.  We need to find the
       // 'staggering' for each layer and make necessary conversions in our
       // arrays.  -JM
       // In the TMB-07 firmware, half-strips in odd layers (layers are
       // counted as ly0-ly5) are shifted by -1 half-strip, whereas in
       // the previous firmware versions half-strips in even layers
       // were shifted by +1 half-strip.  This difference is due to a
       // change from ly3 to ly2 in the choice of the key layer, and
       // the intention to keep half-strips in the key layer unchanged.
       // In the emulator, we use the old way for both cases, to avoid
       // negative half-strip numbers.  This will necessitate a
       // subtraction of 1 half-strip for TMB-07 later on. -SV.
       for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
         stagger[i_layer] = (cscChamber_->layer(i_layer + 1)->geometry()->stagger() + 1) / 2;
       }
     } else {
       edm::LogError("CSCCathodeLCTProcessor|ConfigError")
           << " " << theCSCName_ << " (sector " << theSector << " subsector " << theSubsector << " trig id. "
           << theTrigChamber << ")"
           << " is not defined in current geometry! +++\n"
           << "+++ CSC geometry looks garbled; no emulation possible +++\n";
       numStrips_ = -1;
       numHalfStrips_ = -1;
       numCFEBs_ = -1;
     }
   }
 
   if (numStrips_ <= 0 or 2 * (unsigned)numStrips_ > qualityControl_->get_csc_max_halfstrip(theStation, theRing)) {
     edm::LogError("CSCCathodeLCTProcessor|ConfigError")
         << " " << theCSCName_ << " (sector " << theSector << " subsector " << theSubsector << " trig id. "
         << theTrigChamber << "):"
         << " numStrips_ = " << numStrips_ << "; CLCT emulation skipped! +++";
     std::vector<CSCCLCTDigi> emptyV;
     return emptyV;
   }
 
   // Get comparator digis in this chamber.
   bool hasDigis = getDigis(compdc);
 
   if (hasDigis) {
     // Get halfstrip times from comparator digis.
     std::vector<int> halfStripTimes[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER];
     readComparatorDigis(halfStripTimes);
 
     // Pass arrays of halfstrips on to another run() doing the
     // LCT search.
     // If the number of layers containing digis is smaller than that
     // required to trigger, quit right away.  (If LCT-based digi suppression
     // is implemented one day, this condition will have to be changed
     // to the number of planes required to pre-trigger.)
     unsigned int layersHit = 0;
     for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
       for (int i_hstrip = 0; i_hstrip < CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER; i_hstrip++) {
         if (!halfStripTimes[i_layer][i_hstrip].empty()) {
           layersHit++;
           break;
         }
       }
     }
     // Run the algorithm only if the probability for the pre-trigger
     // to fire is not null.  (Pre-trigger decisions are used for the
     // strip read-out conditions in DigiToRaw.)
     if (layersHit >= nplanes_hit_pretrig)
       run(halfStripTimes);
 
     // Get the high multiplicity bits in this chamber
     encodeHighMultiplicityBits();
   }
 
   // Return vector of CLCTs.
   std::vector<CSCCLCTDigi> tmpV = getCLCTs();
 
   // shift the BX from 7 to 8
   // the unpacked real data CLCTs have central BX at bin 7
   // however in simulation the central BX  is bin 8
   // to make a proper comparison with ALCTs we need
   // CLCT and ALCT to have the central BX in the same bin
   // this shift does not affect the readout of the CLCTs
   // emulated CLCTs put in the event should be centered at bin 7 (as in data)
   for (auto& p : tmpV) {
     p.setBX(p.getBX() + CSCConstants::ALCT_CLCT_OFFSET);
   }
 
   return tmpV;
 }

◆ run() [2/2]

void CSCCathodeLCTProcessor::run ( const std::vector< int > halfstrip[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER] )

Called in test mode and by the run(compdc) function; does the actual LCT finding.

Definition at line 330 of file CSCCathodeLCTProcessor.cc.

References bestCLCT, simKBmtfDigis_cfi::bx, CSCDetId::chamberName(), findLCTs(), CSCBaseboard::infoV, PulseArray::initialize(), sistrip::SpyUtilities::isValid(), LogDebug, CSCConstants::MAX_CLCT_TBINS, numHalfStrips_, AlCaHLTBitMon_ParallelJobs::p, pulse_, qualityControl_, secondCLCT, CSCCLCTDigi::setTrknmb(), CSCBaseboard::theChamber, CSCBaseboard::theEndcap, CSCBaseboard::theRing, CSCBaseboard::theSector, CSCBaseboard::theStation, CSCBaseboard::theSubsector, and CSCBaseboard::theTrigChamber.

                                                                                                           {
   // This version of the run() function can either be called in a standalone
   // test, being passed the halfstrip times, or called by the
   // run() function above.  It uses the findLCTs() method to find vectors
   // of LCT candidates. These candidates are already sorted and the best two per bx
   // are returned.
 
   // initialize the pulse array.
   // add 1 for possible stagger
   pulse_.initialize(numHalfStrips_ + 1);
 
   std::vector<CSCCLCTDigi> CLCTlist = findLCTs(halfstrip);
 
   for (const auto& p : CLCTlist) {
     const int bx = p.getBX();
     if (bx >= CSCConstants::MAX_CLCT_TBINS) {
       if (infoV > 0)
         edm::LogWarning("L1CSCTPEmulatorOutOfTimeCLCT")
             << "+++ Bx of CLCT candidate, " << bx << ", exceeds max allowed, " << CSCConstants::MAX_CLCT_TBINS - 1
             << "; skipping it... +++\n";
       continue;
     }
 
     if (!bestCLCT[bx].isValid()) {
       bestCLCT[bx] = p;
     } else if (!secondCLCT[bx].isValid()) {
       secondCLCT[bx] = p;
     }
   }
 
   for (int bx = 0; bx < CSCConstants::MAX_CLCT_TBINS; bx++) {
     if (bestCLCT[bx].isValid()) {
       bestCLCT[bx].setTrknmb(1);
 
       // check if the LCT is valid
       qualityControl_->checkValid(bestCLCT[bx]);
 
       if (infoV > 0)
         LogDebug("CSCCathodeLCTProcessor")
             << bestCLCT[bx] << " found in " << CSCDetId::chamberName(theEndcap, theStation, theRing, theChamber)
             << " (sector " << theSector << " subsector " << theSubsector << " trig id. " << theTrigChamber << ")"
             << "\n";
     }
     if (secondCLCT[bx].isValid()) {
       secondCLCT[bx].setTrknmb(2);
 
       // check if the LCT is valid
       qualityControl_->checkValid(secondCLCT[bx]);
 
       if (infoV > 0)
         LogDebug("CSCCathodeLCTProcessor")
             << secondCLCT[bx] << " found in " << CSCDetId::chamberName(theEndcap, theStation, theRing, theChamber)
             << " (sector " << theSector << " subsector " << theSubsector << " trig id. " << theTrigChamber << ")"
             << "\n";
     }
   }
   // Now that we have our best CLCTs, they get correlated with the best
   // ALCTs and then get sent to the MotherBoard.  -JM
 }

◆ setConfigParameters()

void CSCCathodeLCTProcessor::setConfigParameters ( const CSCDBL1TPParameters * conf )

Sets configuration parameters obtained via EventSetup mechanism.

Definition at line 127 of file CSCCathodeLCTProcessor.cc.

                                                                                 {
   static std::atomic<bool> config_dumped{false};
 
   fifo_tbins = conf->clctFifoTbins();
   fifo_pretrig = conf->clctFifoPretrig();
   hit_persist = conf->clctHitPersist();
   drift_delay = conf->clctDriftDelay();
   nplanes_hit_pretrig = conf->clctNplanesHitPretrig();
   nplanes_hit_pattern = conf->clctNplanesHitPattern();
   pid_thresh_pretrig = conf->clctPidThreshPretrig();
   min_separation = conf->clctMinSeparation();
 
   // Check and print configuration parameters.
   checkConfigParameters();
   if (!config_dumped) {
     dumpConfigParams();
     config_dumped = true;
   }
   minbx_readout_ = CSCConstants::LCT_CENTRAL_BX - tmb_l1a_window_size / 2;
   maxbx_readout_ = CSCConstants::LCT_CENTRAL_BX + tmb_l1a_window_size / 2;
 }

◆ setDefaultConfigParameters()

void CSCCathodeLCTProcessor::setDefaultConfigParameters ( )

protected

Set default values for configuration parameters.

Definition at line 111 of file CSCCathodeLCTProcessor.cc.

References def_drift_delay, def_fifo_pretrig, def_fifo_tbins, def_hit_persist, def_min_separation, def_nplanes_hit_pattern, def_nplanes_hit_pretrig, def_pid_thresh_pretrig, def_tmb_l1a_window_size, drift_delay, fifo_pretrig, fifo_tbins, hit_persist, CSCConstants::LCT_CENTRAL_BX, maxbx_readout_, min_separation, minbx_readout_, nplanes_hit_pattern, nplanes_hit_pretrig, pid_thresh_pretrig, and tmb_l1a_window_size.

                                                         {
   // Set default values for configuration parameters.
   fifo_tbins = def_fifo_tbins;
   fifo_pretrig = def_fifo_pretrig;
   hit_persist = def_hit_persist;
   drift_delay = def_drift_delay;
   nplanes_hit_pretrig = def_nplanes_hit_pretrig;
   nplanes_hit_pattern = def_nplanes_hit_pattern;
   pid_thresh_pretrig = def_pid_thresh_pretrig;
   min_separation = def_min_separation;
   tmb_l1a_window_size = def_tmb_l1a_window_size;
   minbx_readout_ = CSCConstants::LCT_CENTRAL_BX - tmb_l1a_window_size / 2;
   maxbx_readout_ = CSCConstants::LCT_CENTRAL_BX + tmb_l1a_window_size / 2;
 }

◆ setESLookupTables()

void CSCCathodeLCTProcessor::setESLookupTables ( const CSCL1TPLookupTableCCLUT * conf )

Definition at line 149 of file CSCCathodeLCTProcessor.cc.

References cclut_.

149 { cclut_->setESLookupTables(conf); }

CSCCathodeLCTProcessor::cclut_

std::unique_ptr< ComparatorCodeLUT > cclut_

Definition: CSCCathodeLCTProcessor.h:231

Member Data Documentation

◆ best_pid

unsigned int CSCCathodeLCTProcessor::best_pid[CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER]

protected

Definition at line 170 of file CSCCathodeLCTProcessor.h.

Referenced by constructCLCT(), constructPreCLCT(), CSCUpgradeCathodeLCTProcessor::findLCTs(), findLCTs(), patternFinding(), CSCUpgradeCathodeLCTProcessor::preTrigger(), and preTrigger().

◆ bestCLCT

CSCCLCTDigi CSCCathodeLCTProcessor::bestCLCT[CSCConstants::MAX_CLCT_TBINS]

protected

Best LCT in this chamber, as found by the processor.

Definition at line 100 of file CSCCathodeLCTProcessor.h.

Referenced by clear(), getBestCLCT(), getCLCTs(), and run().

◆ cathode_showers_

CSCShowerDigi CSCCathodeLCTProcessor::cathode_showers_[CSCConstants::MAX_CLCT_TBINS]

protected

Definition at line 105 of file CSCCathodeLCTProcessor.h.

Referenced by clear(), encodeHighMultiplicityBits(), getAllShower(), and readoutShower().

◆ cclut_

std::unique_ptr<ComparatorCodeLUT> CSCCathodeLCTProcessor::cclut_

protected

Definition at line 231 of file CSCCathodeLCTProcessor.h.

Referenced by constructCLCT(), CSCCathodeLCTProcessor(), and setESLookupTables().

◆ clct_pattern_

CSCPatternBank::LCTPatterns CSCCathodeLCTProcessor::clct_pattern_ = {}

protected

Definition at line 179 of file CSCCathodeLCTProcessor.h.

Referenced by constructCLCT(), constructPreCLCT(), CSCCathodeLCTProcessor(), and patternFinding().

◆ def_drift_delay

const unsigned int CSCCathodeLCTProcessor::def_drift_delay = 2

staticprotected

Definition at line 221 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

◆ def_fifo_pretrig

const unsigned int CSCCathodeLCTProcessor::def_fifo_pretrig = 7

staticprotected

Definition at line 220 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

◆ def_fifo_tbins

const unsigned int CSCCathodeLCTProcessor::def_fifo_tbins = 12

staticprotected

Default values of configuration parameters.

Definition at line 220 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

◆ def_hit_persist

const unsigned int CSCCathodeLCTProcessor::def_hit_persist = 6

staticprotected

Definition at line 221 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

◆ def_min_separation

const unsigned int CSCCathodeLCTProcessor::def_min_separation = 10

staticprotected

Definition at line 224 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

◆ def_nplanes_hit_pattern

const unsigned int CSCCathodeLCTProcessor::def_nplanes_hit_pattern = 4

staticprotected

Definition at line 223 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

◆ def_nplanes_hit_pretrig

const unsigned int CSCCathodeLCTProcessor::def_nplanes_hit_pretrig = 2

staticprotected

Definition at line 222 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

◆ def_pid_thresh_pretrig

const unsigned int CSCCathodeLCTProcessor::def_pid_thresh_pretrig = 2

staticprotected

Definition at line 224 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

◆ def_tmb_l1a_window_size

const unsigned int CSCCathodeLCTProcessor::def_tmb_l1a_window_size = 7

staticprotected

Definition at line 225 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

◆ digiV

std::vector<CSCComparatorDigi> CSCCathodeLCTProcessor::digiV[CSCConstants::NUM_LAYERS]

protected

Definition at line 189 of file CSCCathodeLCTProcessor.h.

Referenced by encodeHighMultiplicityBits(), getDigis(), and readComparatorDigis().

◆ drift_delay

unsigned int CSCCathodeLCTProcessor::drift_delay

protected

Definition at line 205 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), dumpConfigParams(), CSCUpgradeCathodeLCTProcessor::findLCTs(), findLCTs(), setConfigParameters(), and setDefaultConfigParameters().

◆ early_tbins

int CSCCathodeLCTProcessor::early_tbins

protected

VK: separate handle for early time bins

Definition at line 214 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor().

◆ fifo_pretrig

unsigned int CSCCathodeLCTProcessor::fifo_pretrig

protected

Definition at line 204 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), dumpConfigParams(), setConfigParameters(), and setDefaultConfigParameters().

◆ fifo_tbins

unsigned int CSCCathodeLCTProcessor::fifo_tbins

protected

Configuration parameters.

Definition at line 204 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), dumpConfigParams(), CSCUpgradeCathodeLCTProcessor::findLCTs(), findLCTs(), patternFinding(), CSCUpgradeCathodeLCTProcessor::preTrigger(), preTrigger(), readComparatorDigis(), setConfigParameters(), and setDefaultConfigParameters().

◆ hit_persist

unsigned int CSCCathodeLCTProcessor::hit_persist

protected

Definition at line 205 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), dumpConfigParams(), patternFinding(), pulseExtension(), readComparatorDigis(), setConfigParameters(), and setDefaultConfigParameters().

◆ ispretrig_

bool CSCCathodeLCTProcessor::ispretrig_[CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER]

protected

Definition at line 176 of file CSCCathodeLCTProcessor.h.

Referenced by clearPreTriggers(), CSCUpgradeCathodeLCTProcessor::markBusyZone(), CSCUpgradeCathodeLCTProcessor::markPreTriggerZone(), CSCUpgradeCathodeLCTProcessor::preTrigger(), and preTrigger().

◆ maxbx_readout_

unsigned CSCCathodeLCTProcessor::maxbx_readout_

protected

Definition at line 199 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), readoutShower(), setConfigParameters(), and setDefaultConfigParameters().

◆ min_separation

unsigned int CSCCathodeLCTProcessor::min_separation

protected

Definition at line 207 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), dumpConfigParams(), markBusyKeys(), setConfigParameters(), and setDefaultConfigParameters().

◆ minbx_readout_

unsigned CSCCathodeLCTProcessor::minbx_readout_

protected

Definition at line 198 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), readoutShower(), setConfigParameters(), and setDefaultConfigParameters().

◆ minLayersCentralTBin_

unsigned CSCCathodeLCTProcessor::minLayersCentralTBin_

protected

Definition at line 197 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), and encodeHighMultiplicityBits().

◆ nhits

unsigned int CSCCathodeLCTProcessor::nhits[CSCConstants::MAX_NUM_HALF_STRIPS_RUN2_TRIGGER]

protected

Definition at line 173 of file CSCCathodeLCTProcessor.h.

Referenced by constructCLCT(), constructPreCLCT(), CSCUpgradeCathodeLCTProcessor::findLCTs(), findLCTs(), patternFinding(), CSCUpgradeCathodeLCTProcessor::preTrigger(), and preTrigger().

◆ nplanes_hit_pattern

unsigned int CSCCathodeLCTProcessor::nplanes_hit_pattern

protected

Definition at line 206 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), dumpConfigParams(), CSCUpgradeCathodeLCTProcessor::findLCTs(), findLCTs(), patternFinding(), setConfigParameters(), and setDefaultConfigParameters().

◆ nplanes_hit_pretrig

unsigned int CSCCathodeLCTProcessor::nplanes_hit_pretrig

protected

Definition at line 206 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), dumpConfigParams(), findLCTs(), patternFinding(), CSCUpgradeCathodeLCTProcessor::preTrigger(), preTrigger(), run(), setConfigParameters(), and setDefaultConfigParameters().

◆ numCFEBs_

int CSCCathodeLCTProcessor::numCFEBs_

protected

Definition at line 183 of file CSCCathodeLCTProcessor.h.

Referenced by constructCLCT(), and run().

◆ numHalfStrips_

int CSCCathodeLCTProcessor::numHalfStrips_

protected

Definition at line 184 of file CSCCathodeLCTProcessor.h.

Referenced by clearPreTriggers(), dumpDigis(), CSCUpgradeCathodeLCTProcessor::findLCTs(), findLCTs(), CSCUpgradeCathodeLCTProcessor::markBusyZone(), patternFinding(), CSCUpgradeCathodeLCTProcessor::preTrigger(), preTrigger(), pulseExtension(), readComparatorDigis(), and run().

◆ numStrips_

int CSCCathodeLCTProcessor::numStrips_

protected

Definition at line 182 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), readComparatorDigis(), and run().

◆ peakCheck_

bool CSCCathodeLCTProcessor::peakCheck_

protected

check the peak of total hits and single bx hits for cathode HMT

Definition at line 201 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), and encodeHighMultiplicityBits().

◆ pid_thresh_pretrig

unsigned int CSCCathodeLCTProcessor::pid_thresh_pretrig

protected

Definition at line 207 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), dumpConfigParams(), patternFinding(), CSCUpgradeCathodeLCTProcessor::preTrigger(), preTrigger(), setConfigParameters(), and setDefaultConfigParameters().

◆ pulse_

PulseArray CSCCathodeLCTProcessor::pulse_

protected

Definition at line 167 of file CSCCathodeLCTProcessor.h.

Referenced by patternFinding(), pulseExtension(), and run().

◆ qualityControl_

std::unique_ptr<LCTQualityControl> CSCCathodeLCTProcessor::qualityControl_

protected

Definition at line 228 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), readoutCLCTs(), and run().

◆ readout_earliest_2

bool CSCCathodeLCTProcessor::readout_earliest_2

protected

VK: whether to readout only the earliest two LCTs in readout window

Definition at line 217 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), and readoutCLCTs().

◆ secondCLCT

CSCCLCTDigi CSCCathodeLCTProcessor::secondCLCT[CSCConstants::MAX_CLCT_TBINS]

protected

Second best LCT in this chamber, as found by the processor.

Definition at line 103 of file CSCCathodeLCTProcessor.h.

Referenced by clear(), getCLCTs(), getSecondCLCT(), and run().

◆ showerNumTBins_

unsigned CSCCathodeLCTProcessor::showerNumTBins_

protected

Definition at line 196 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), and encodeHighMultiplicityBits().

◆ stagger

int CSCCathodeLCTProcessor::stagger[CSCConstants::NUM_LAYERS]

protected

Definition at line 187 of file CSCCathodeLCTProcessor.h.

Referenced by clearPreTriggers(), constructCLCT(), CSCCathodeLCTProcessor(), CSCUpgradeCathodeLCTProcessor::findLCTs(), findLCTs(), CSCUpgradeCathodeLCTProcessor::markBusyZone(), patternFinding(), CSCUpgradeCathodeLCTProcessor::preTrigger(), preTrigger(), readComparatorDigis(), and run().

◆ start_bx_shift

int CSCCathodeLCTProcessor::start_bx_shift

protected

VK: some quick and dirty fix to reduce CLCT deadtime

Definition at line 211 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), CSCUpgradeCathodeLCTProcessor::findLCTs(), findLCTs(), and pulseExtension().

◆ thePreTriggerBXs

std::vector<int> CSCCathodeLCTProcessor::thePreTriggerBXs

protected

Definition at line 190 of file CSCCathodeLCTProcessor.h.

Referenced by clear(), findLCTs(), and preTriggerBXs().

◆ thePreTriggerDigis

std::vector<CSCCLCTPreTriggerDigi> CSCCathodeLCTProcessor::thePreTriggerDigis

protected

Definition at line 191 of file CSCCathodeLCTProcessor.h.

Referenced by clear(), CSCCathodeLCTProcessor(), CSCUpgradeCathodeLCTProcessor::preTrigger(), preTrigger(), and preTriggerDigis().

◆ thresholds_

std::vector<unsigned> CSCCathodeLCTProcessor::thresholds_

protected

Definition at line 195 of file CSCCathodeLCTProcessor.h.

Referenced by CSCCathodeLCTProcessor(), and encodeHighMultiplicityBits().

◆ tmb_l1a_window_size

unsigned int CSCCathodeLCTProcessor::tmb_l1a_window_size

protected

Definition at line 208 of file CSCCathodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCCathodeLCTProcessor(), readoutCLCTs(), setConfigParameters(), and setDefaultConfigParameters().

Public Member Functions

Protected Member Functions

Protected Attributes

Static Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ CSCCathodeLCTProcessor()

◆ ~CSCCathodeLCTProcessor()

Member Function Documentation

◆ checkConfigParameters()

◆ cleanComparatorContainer()

◆ clear()

◆ clearPreTriggers()

◆ constructCLCT()

◆ constructPreCLCT()

◆ dumpConfigParams()

◆ dumpDigis()

◆ encodeHighMultiplicityBits()

◆ findLCTs()

◆ getAllShower()

◆ getBestCLCT()

◆ getCLCTs()

◆ getDigis() [1/2]

◆ getDigis() [2/2]

◆ getSecondCLCT()

◆ markBusyKeys()

◆ patternFinding()

◆ preTrigger()

◆ preTriggerBXs()

◆ preTriggerDigis()

◆ pulseExtension()

◆ readComparatorDigis()

◆ readoutCLCTs()

◆ readoutShower()

◆ run() [1/2]

◆ run() [2/2]

◆ setConfigParameters()

◆ setDefaultConfigParameters()

◆ setESLookupTables()

Member Data Documentation

◆ best_pid

◆ bestCLCT

◆ cathode_showers_

◆ cclut_

◆ clct_pattern_

◆ def_drift_delay

◆ def_fifo_pretrig

◆ def_fifo_tbins

◆ def_hit_persist

◆ def_min_separation

◆ def_nplanes_hit_pattern

◆ def_nplanes_hit_pretrig

◆ def_pid_thresh_pretrig

◆ def_tmb_l1a_window_size

◆ digiV

◆ drift_delay

◆ early_tbins

◆ fifo_pretrig

◆ fifo_tbins

◆ hit_persist

◆ ispretrig_

◆ maxbx_readout_

◆ min_separation

◆ minbx_readout_

◆ minLayersCentralTBin_

◆ nhits

◆ nplanes_hit_pattern

◆ nplanes_hit_pretrig

◆ numCFEBs_

◆ numHalfStrips_

◆ numStrips_

◆ peakCheck_

◆ pid_thresh_pretrig

◆ pulse_

◆ qualityControl_

◆ readout_earliest_2

◆ secondCLCT

◆ showerNumTBins_

◆ stagger

◆ start_bx_shift