Measurement Class Reference

#include <Measurement.h>

Inheritance diagram for Measurement:

Public Member Functions
void	addAffectingEntriesFromOptO (const OpticalObject *optoP)
void	AddOptOListItem (OpticalObject *opto)
void	AddOptONameListItem (ALIstring optos)
const std::vector< Entry * > &	affectingEntryList () const
void	buildAffectingEntryList ()
void	buildOptOList ()
virtual void	buildOptONamesList (const std::vector< ALIstring > &wl)
void	calculateOriginalSimulatedValue ()
virtual void	calculateSimulatedValue (ALIbool firstTime)
void	construct ()
void	constructFromOA (OpticalAlignMeasurementInfo &measInfo)
void	copyMeas (Measurement *meas, const std::string &subsstr1, const std::string &subsstr2)
virtual void	correctValueAndSigma ()
std::vector< ALIdouble >	DerivativeRespectEntry (Entry *entry)
const ALIuint	dim () const
void	DumpBadOrderOptOs ()
void	fillData (ALIuint coor, const std::vector< ALIstring > &wl)
void	fillData (ALIuint coor, OpticalAlignParam *oaParam)
const CLHEP::Hep3Vector &	getLightRayDirection () const
const CLHEP::Hep3Vector &	getLightRayPosition () const
ALIstring	getMeasuringBehaviour (const std::vector< OpticalObject *>::const_iterator vocite)
const OpticalObject *	getPreviousOptO (const OpticalObject *Popto) const
	Measurement (const ALIint measdim, ALIstring &type, ALIstring &name)
	Measurement ()
const ALIstring &	name () const
const std::vector< OpticalObject * > &	OptOList () const
const std::vector< ALIstring > &	OptONameList () const
void	postConstruct ()
const ALIstring &	sensorName ()
virtual void	setConversionFactor (const std::vector< ALIstring > &wordlist)
void	SetDimension (ALIuint dim)
void	setLightRayDirection (const CLHEP::Hep3Vector &lightRayDirection)
void	setLightRayPosition (const CLHEP::Hep3Vector &lightRayPosition)
void	setName ()
void	setSigma (ALIint coor, ALIdouble val)
void	setType (ALIstring type)
void	setValue (ALIint coor, ALIdouble val)
void	setValueSimulated (ALIint coor, ALIdouble value)
void	setValueSimulated_orig (ALIint coor, ALIdouble value)
virtual void	setXlaserLine (ALIuint ii, int val)
const ALIdouble *	sigma () const
const ALIdouble	sigma (ALIuint ii) const
virtual const ALIdouble	sigmaDimensionFactor () const
const ALIstring &	type () const
const ALIdouble *	value () const
const ALIdouble	value (ALIuint ii) const
virtual const ALIdouble	valueDimensionFactor () const
bool	valueIsSimulated (ALIint coor)
const ALIdouble	valueSimulated (ALIuint ii) const
const ALIdouble	valueSimulated_orig (ALIuint ii) const
const ALIstring	valueType (ALIuint ii) const
virtual int	xlaserLine (ALIuint ii)
virtual	~Measurement ()

Static Public Member Functions
static ALIstring	getCurrentDate ()
static ALIstring	getCurrentTime ()
static ALIstring &	measurementsFileName ()
static void	setCurrentDate (const std::vector< ALIstring > &wl)
	set the date of the current measurement More...
static void	setMeasurementsFileName (const ALIstring &filename)

Static Public Attributes
static ALIdouble	cameraScaleFactor = 1.
static ALIbool	only1 = false
static ALIstring	only1Date = ""
static ALIstring	only1Time = ""

Protected Member Functions
void	printStartCalculateSimulatedValue (const Measurement *meas)
void	Substitute2p (ALIstring &ref, const ALIstring &firstref, int NtwoPoints)

Private Attributes
std::vector< OpticalObject * >	_OptOList
std::vector< ALIstring >	_OptONameList
std::vector< Entry * >	theAffectingEntryList
ALIuint	theDim
CLHEP::Hep3Vector	theLightRayDirection
CLHEP::Hep3Vector	theLightRayPosition
ALIstring	theName
ALIdouble *	theSigma
ALIstring	theType
ALIdouble *	theValue
ALIbool *	theValueIsSimulated
ALIdouble *	theValueSimulated
ALIdouble *	theValueSimulated_orig
ALIstring *	theValueType

Static Private Attributes
static ALIstring	theCurrentDate = "99/99/99"
static ALIstring	theCurrentTime = "99:99"
static ALIstring	theMeasurementsFileName = ""

Detailed Description

Definition at line 27 of file Measurement.h.

Constructor & Destructor Documentation

Measurement() [1/2]

Measurement::Measurement	(	const ALIint	measdim,
		ALIstring &	type,
		ALIstring &	name
	)

Definition at line 44 of file Measurement.cc.

References theDim, theSigma, theValue, theValueIsSimulated, theValueSimulated, theValueSimulated_orig, and theValueType.

    : theDim(measdim), theType(type), theName(name) {
  //  _OptOnames = new ALIstring[theDim];
  theValue = new ALIdouble[theDim];
  theSigma = new ALIdouble[theDim];
  theValueType = new ALIstring[theDim];

  theValueSimulated = new ALIdouble[theDim];
  theValueSimulated_orig = new ALIdouble[theDim];
  theValueIsSimulated = new ALIbool[theDim];
}

Measurement() [2/2]

Measurement::Measurement ( )

inline

Definition at line 31 of file Measurement.h.

{};

~Measurement()

Measurement::~Measurement ( )

virtual

Definition at line 559 of file Measurement.cc.

References theSigma, and theValue.

                          {
  //  delete[] _name;
  delete[] theValue;
  delete[] theSigma;
}

Member Function Documentation

addAffectingEntriesFromOptO()

void Measurement::addAffectingEntriesFromOptO

(

const OpticalObject *

optoP

)

Definition at line 372 of file Measurement.cc.

References OpticalObject::CoordinateEntryList(), gather_cfg::cout, ALIUtils::debug, OpticalObject::ExtraEntryList(), spr::find(), OpticalObject::name(), OpticalObject::parent(), and theAffectingEntryList.

Referenced by buildAffectingEntryList().

                                                                        {
  if (ALIUtils::debug >= 3)
    std::cout << "Measurement::addAffectingEntriesFromOptO: OptO taking part in Measurement: " << optoP->name()
              << std::endl;
  //---------- Loop entries in this OptO
  std::vector<Entry*>::const_iterator vecite;
  std::vector<Entry*>::const_iterator fvecite;
  for (vecite = optoP->CoordinateEntryList().begin(); vecite != optoP->CoordinateEntryList().end(); ++vecite) {
    //T     if( find( theAffectingEntryList.begin(), theAffectingEntryList.end(), (*vecite) ) == theAffectingEntryList.end() ){
    //t      theAffectingEntryList.push_back(*vecite);
    //T    }
    fvecite = find(theAffectingEntryList.begin(), theAffectingEntryList.end(), (*vecite));
    if (fvecite == theAffectingEntryList.end()) {
      theAffectingEntryList.push_back(*vecite);
      if (ALIUtils::debug >= 4)
        std::cout << "Entry that may affect Measurement: " << (*vecite)->name() << std::endl;
    }
  }
  for (vecite = optoP->ExtraEntryList().begin(); vecite != optoP->ExtraEntryList().end(); ++vecite) {
    fvecite = find(theAffectingEntryList.begin(), theAffectingEntryList.end(), (*vecite));
    if (fvecite == theAffectingEntryList.end()) {
      theAffectingEntryList.push_back(*vecite);
      if (ALIUtils::debug >= 4)
        std::cout << "Entry that may affect Measurement: " << (*vecite)->name() << std::endl;
    }
  }
  if (optoP->parent() != nullptr) {
    addAffectingEntriesFromOptO(optoP->parent());
  }
}

AddOptOListItem()

void Measurement::AddOptOListItem ( OpticalObject *  opto )

inline

Definition at line 142 of file Measurement.h.

References _OptOList.

{ _OptOList.push_back(opto); }

AddOptONameListItem()

void Measurement::AddOptONameListItem ( ALIstring  optos )

inline

Definition at line 140 of file Measurement.h.

References _OptONameList.

Referenced by MeasurementDiffEntry::buildOptONamesList().

{ _OptONameList.push_back(optos); }

affectingEntryList()

const std::vector<Entry*>& Measurement::affectingEntryList ( ) const

inline

Definition at line 103 of file Measurement.h.

References theAffectingEntryList.

{ return theAffectingEntryList; }

buildAffectingEntryList()

void Measurement::buildAffectingEntryList

(

)

Definition at line 360 of file Measurement.cc.

References _OptOList, and addAffectingEntriesFromOptO().

Referenced by postConstruct().

                                          {
  //---------- Loop OptO MeasuredList
  std::vector<OpticalObject*>::const_iterator vocite;
  for (vocite = _OptOList.begin(); vocite != _OptOList.end(); ++vocite) {
    addAffectingEntriesFromOptO(*vocite);
  }
}

buildOptOList()

void Measurement::buildOptOList

(

)

Definition at line 305 of file Measurement.cc.

References _OptOList, _OptONameList, EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, gather_cfg::cout, ALIUtils::debug, beamvalidation::exit(), Model::getOptOByName(), cuy::ii, OpticalObject::name(), and Substitute2p().

Referenced by postConstruct().

                                {
  //-  if ( ALIUtils::debug >= 3 ) std::cout << std::endl << " MEASUREMENT: " << " " << this->name() << std::endl;
  ALIstring twopoints("..");  // .. goes one level up in the tree fo OptOs

  //---------------------------------------- Loop OptONameList
  std::vector<ALIstring>::iterator vsite;
  for (vsite = _OptONameList.begin(); vsite != _OptONameList.end(); ++vsite) {
    //----------------------------------- Count how many '..' there are in the name
    ALIuint ii = 0;
    //    ALIuint slen = (*vsite).length();
    ALIuint Ntwopoints = 0;  //---- No '..' in ALIstring
    for (;;) {
      int i2p = (*vsite).find_first_of(twopoints, 3 * ii);  // if it is ., it also finds it!!!
      if (i2p < 0)
        break;
      if (i2p != ALIint(3 * ii)) {
        std::cerr << i2p << "!!! Bad position of '..' in reference ALIstring: " << (*vsite).c_str() << std::endl;
        exit(2);
      } else {
        Ntwopoints++;
        if (ALIUtils::debug >= 9)
          std::cout << "N2p" << Ntwopoints;
      }
      ii++;
    }
    //------ Substitute '..' by reference (the last OptO in list)
    if (Ntwopoints != 0) {
      Substitute2p((*vsite), *(_OptONameList.end() - 1), Ntwopoints);
    }
    //----- Get OpticalObject* that correspond to ALIstring and fill list
    ALIstring referenceOptO = (*vsite);
    //--- a ':' is used in OptOs that have several possible behavious
    ALIint colon = referenceOptO.find(':');
    if (colon != -1) {
      if (ALIUtils::debug >= 99) {
        std::cout << "colon in reference OptO name " << colon << referenceOptO.c_str() << std::endl;
      }
      referenceOptO = referenceOptO.substr(0, colon);
    }
    OpticalObject* OptOitem = Model::getOptOByName(referenceOptO);
    if (ALIUtils::debug >= 3)
      std::cout << "Measurement::buildOptOList: OptO in Measurement: " << OptOitem->name() << std::endl;
    if (OptOitem != (OpticalObject*)nullptr) {
      _OptOList.push_back(OptOitem);
    } else {
      std::cerr << "!!! Error in Measurement: can't find Optical Object " << (*vsite).c_str() << std::endl;
      exit(2);
    }
  }
}

buildOptONamesList()

void Measurement::buildOptONamesList ( const std::vector< ALIstring > &  wl )

virtual

Reimplemented in MeasurementDiffEntry.

Definition at line 174 of file Measurement.cc.

References _OptONameList, EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, beamvalidation::exit(), cuy::ii, and LaserClient_cfi::wl.

Referenced by construct(), constructFromOA(), and copyMeas().

                                                                   {
  int NPairs = (wl.size() + 1) / 2;  // Number of OptO names ( pair of name and '&' )

  //--------- Fill list with names
  for (int ii = 0; ii < NPairs; ii++) {
    _OptONameList.push_back(wl[ii * 2]);
    // Check for separating '&'
    if (ii != NPairs - 1 && wl[2 * ii + 1] != ALIstring("&")) {
      //      ALIFileIn::getInstance( Model::SDFName() ).ErrorInLine();
      std::cerr << "!!! Measured Optical Objects should be separated by '&', not by" << wl[2 * ii + 1] << std::endl;
      exit(2);
    }
  }
}

calculateOriginalSimulatedValue()

void Measurement::calculateOriginalSimulatedValue

(

)

Definition at line 436 of file Measurement.cc.

References calculateSimulatedValue(), gather_cfg::cout, ALIUtils::debug, dim(), ALIUtils::getFirstTime(), GlobalOptionMgr::getInstance(), GlobalOptionMgr::GlobalOptions(), cuy::ii, setValue(), setValueSimulated_orig(), valueIsSimulated(), and valueSimulated().

                                                  {
  //----------  Calculate the simulated value of the Measurement
  calculateSimulatedValue(true);

#ifdef COCOA_VIS
  if (ALIUtils::getFirstTime()) {
    GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
    if (gomgr->GlobalOptions()["VisWriteVRML"] > 1) {
      ALIVRMLMgr::getInstance().newLightRay();
    }
    /*-    if(Model::GlobalOptions()["VisWriteIguana"] > 1) {
           IgCocoaFileMgr::getInstance().newLightPath( theName );
           } */
  }
#endif

  //---------- Set original simulated values to it
  //-  if(ALIUtils::debug >= 5) std::cout << "MEAS DIMENSION" << dim() << std::endl;
  for (ALIuint ii = 0; ii < dim(); ii++) {
    setValueSimulated_orig(ii, valueSimulated(ii));
    if (ALIUtils::debug >= 4)
      std::cout << "SETsimuvalOriginal" << valueSimulated(ii) << std::endl;
    //----- If Measurement has as value 'simulated_value', set the value to the simulated one
    if (valueIsSimulated(ii) == 1) {
      setValue(ii, valueSimulated(ii));
      //- std::cout << ii << " setting value as simulated " <<  valueSimulated(ii) << " " << value(ii) << this << std::endl;
    }
  }
}

calculateSimulatedValue()

virtual void Measurement::calculateSimulatedValue ( ALIbool  firstTime )

inlinevirtual

Reimplemented in MeasurementTiltmeter, MeasurementCOPS, MeasurementDiffEntry, MeasurementDistancemeter, MeasurementDistancemeter3dim, and MeasurementSensor2D.

Definition at line 50 of file Measurement.h.

Referenced by calculateOriginalSimulatedValue(), and DerivativeRespectEntry().

{};

construct()

void Measurement::construct

(

)

Definition at line 59 of file Measurement.cc.

References buildOptONamesList(), filterCSVwithJSON::copy, correctValueAndSigma(), gather_cfg::cout, ALIUtils::debug, dim(), fillData(), ALIFileIn::getInstance(), ALIFileIn::getWordsInLine(), cuy::ii, name(), postConstruct(), Model::SDFName(), type(), and valueIsSimulated().

Referenced by Model::readSystemDescription().

                            {
  ALIFileIn& filein = ALIFileIn::getInstance(Model::SDFName());

  //---------- Read OptOs that take part in this Measurement
  std::vector<ALIstring> wordlist;
  filein.getWordsInLine(wordlist);

  //--------- Fill the list of names of OptOs that take part in this measurement ( names only )
  buildOptONamesList(wordlist);

  if (ALIUtils::debug >= 3) {
    std::cout << "@@@@ Reading Measurement " << name() << " TYPE= " << type() << std::endl << " MEASURED OPTO NAMES: ";
    std::ostream_iterator<ALIstring> outs(std::cout, " ");
    copy(wordlist.begin(), wordlist.end(), outs);
    std::cout << std::endl;
  }

  //---------- Read the data
  for (unsigned int ii = 0; ii < dim(); ii++) {
    filein.getWordsInLine(wordlist);
    fillData(ii, wordlist);
  }

  if (!valueIsSimulated(0))
    correctValueAndSigma();

  postConstruct();
}

constructFromOA()

void Measurement::constructFromOA

(

OpticalAlignMeasurementInfo &

measInfo

)

Definition at line 89 of file Measurement.cc.

References _OptONameList, buildOptONamesList(), gather_cfg::cout, ALIUtils::debug, dim(), ALIUtils::dumpVS(), submitPVResolutionJobs::err, fillData(), cuy::ii, OpticalAlignMeasurementInfo::isSimulatedValue_, OpticalAlignMeasurementInfo::measObjectNames_, name(), postConstruct(), sigmaDimensionFactor(), type(), heppy_batch::val, valueDimensionFactor(), and OpticalAlignMeasurementInfo::values_.

Referenced by Model::BuildMeasurementsFromOA().

                                                                       {
  //---- Build wordlist to build object name list
  std::vector<std::string> objNames = measInfo.measObjectNames_;
  std::vector<std::string>::const_iterator site;
  std::vector<ALIstring> wordlist;
  //--- Fill the list of names of OptOs that take part in this measurement ( names only )
  for (site = objNames.begin(); site != objNames.end(); ++site) {
    if (site != objNames.begin())
      wordlist.push_back("&");
    wordlist.push_back(*site);
  }
  buildOptONamesList(wordlist);

  if (ALIUtils::debug >= 3) {
    std::cout << "@@@@ Reading Measurement " << name() << " TYPE= " << type() << " " << measInfo << std::endl
              << " MEASURED OPTO NAMES: ";
    for (size_t ii = 0; ii < _OptONameList.size(); ii++) {
      std::cout << _OptONameList[ii] << " ";
    }
    std::cout << std::endl;
  }

  //---------- No data, set to simulated_value
  for (unsigned int ii = 0; ii < dim(); ii++) {
    wordlist.clear();
    wordlist.push_back((measInfo.values_)[ii].name_);
    char ctmp[20];
    if (measInfo.isSimulatedValue_[ii]) {
      if (ALIUtils::debug >= 5) {
        std::cout << "Measurement::constructFromOA:  meas value " << ii << " " << dim() << " = simulated_value"
                  << std::endl;
      }
      wordlist.push_back("simulated_value");
    } else {
      if (ALIUtils::debug >= 5) {
        std::cout << "Measurement::constructFromOA:  meas value " << ii << " " << dim() << " = "
                  << measInfo.values_.size() << std::endl;
      }
      ALIdouble val =
          (measInfo.values_)[ii].value_ /
          valueDimensionFactor();  //in XML  values are without dimensions, so neutralize multiplying by valueDimensionFactor() in fillData
      gcvt(val, 10, ctmp);
      wordlist.push_back(ctmp);
    }
    ALIdouble err =
        (measInfo.values_)[ii].error_ /
        sigmaDimensionFactor();  //in XML  values are without dimensions, so neutralize multiplying by valueDimensionFactor() in fillData
    gcvt(err, 10, ctmp);
    wordlist.push_back(ctmp);
    std::cout << " sigma " << err << " = " << ctmp << " " << (measInfo.values_)[ii].error_ << std::endl;
    //-    wordlist.push_back( "simulated_value" );
    //-   wordlist.push_back( "1." );
    if (ALIUtils::debug >= 5)
      ALIUtils::dumpVS(wordlist, " Measurement: calling fillData ");
    //-    std::cout << " MEAS INFO " << measInfo << std::endl;
    //-   std::cout << ii << " MEAS INFO PARAM " <<  (measInfo.values_)[ii] << std::endl;
    //- std::cout << ii << " MEAS INFO PARAM VALUE " <<  (measInfo.values_)[ii].value_ << std::endl;
    fillData(ii, wordlist);
  }

  postConstruct();
}

copyMeas()

void Measurement::copyMeas	(	Measurement *	meas,
		const std::string &	subsstr1,
		const std::string &	subsstr2
	)

Definition at line 621 of file Measurement.cc.

References buildOptONamesList(), ALIUtils::changeName(), filterCSVwithJSON::copy, gather_cfg::cout, ALIUtils::debug, dim(), cuy::ii, name(), OptOList(), postConstruct(), sigma(), theDim, theName, theSigma, theType, theValue, theValueIsSimulated, theValueSimulated, theValueSimulated_orig, type(), value(), valueIsSimulated(), valueSimulated(), and valueSimulated_orig().

Referenced by Model::copyMeasurements().

                                                                                                  {
  theDim = meas->dim();
  theType = meas->type();
  theName = ALIUtils::changeName(meas->name(), subsstr1, subsstr2);

  //  _OptOnames = new ALIstring[theDim];
  theValueSimulated = new ALIdouble[theDim];
  theValueSimulated_orig = new ALIdouble[theDim];
  theValueIsSimulated = new ALIbool[theDim];
  theValue = const_cast<ALIdouble*>(meas->value());
  theSigma = const_cast<ALIdouble*>(meas->sigma());

  unsigned int ii;
  for (ii = 0; ii < theDim; ii++) {
    theValueSimulated[ii] = meas->valueSimulated(ii);
    theValueSimulated_orig[ii] = meas->valueSimulated_orig(ii);
    theValueIsSimulated[ii] = meas->valueIsSimulated(ii);
  }

  //--------- Fill the list of names of OptOs that take part in this measurement ( names only )

  std::vector<std::string> wordlist;
  auto& optolist = meas->OptOList();
  ALIuint nOptos = optolist.size();
  for (ALIuint ii = 0; ii < nOptos; ii++) {
    wordlist.push_back(ALIUtils::changeName(optolist[ii]->longName(), subsstr1, subsstr2));
    std::cout << " copymeas " << ALIUtils::changeName(optolist[ii]->longName(), subsstr1, subsstr2) << std::endl;
    if (ii != nOptos - 1)
      wordlist.push_back("&");
  }

  buildOptONamesList(wordlist);

  if (ALIUtils::debug >= 3) {
    std::cout << "@@@@ Reading Measurement " << name() << " TYPE= " << type() << std::endl << " MEASURED OPTO NAMES: ";
    std::ostream_iterator<ALIstring> outs(std::cout, " ");
    copy(wordlist.begin(), wordlist.end(), outs);
    std::cout << std::endl;
  }

  postConstruct();
}

correctValueAndSigma()

virtual void Measurement::correctValueAndSigma ( )

inlinevirtual

Reimplemented in MeasurementTiltmeter, MeasurementDistancemeter, MeasurementDistancemeter3dim, MeasurementCOPS, and MeasurementSensor2D.

Definition at line 66 of file Measurement.h.

Referenced by construct(), Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().

{};

DerivativeRespectEntry()

std::vector< ALIdouble > Measurement::DerivativeRespectEntry

(

Entry *

entry

)

Definition at line 489 of file Measurement.cc.

References funct::abs(), calculateSimulatedValue(), EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, gather_cfg::cout, ALIUtils::debug, mps_splice::entry, beamvalidation::exit(), ALIUtils::getMaximumDeviationDerivative(), cuy::ii, name(), theDim, theValueSimulated, and theValueSimulated_orig.

                                                                     {
  //---------- std::vector of derivatives to return
  std::vector<ALIdouble> deriv;
  ALIdouble sumderiv;

  //---------- displacement to start with
  ALIdouble displacement = entry->startingDisplacement();
  //----- all angles are in radians, so, if displace is not, rescale it before making the displacement
  //-  displacement *= entry->SigmaDimensionFactor();
  if (ALIUtils::debug >= 3)
    std::cout << std::endl
              << "%%% Derivative w.r.t. entry " << entry->name() << ": displacement = " << displacement << std::endl;

  ALIint count_itera = 0;

  //---------- Loop decreasing the displacement a factor 2, until the precision set is reached
  do {
    count_itera++;
    entry->displace(displacement);

    if (ALIUtils::debug >= 5)
      std::cout << "Get simulated value for displacement " << displacement << std::endl;
    calculateSimulatedValue(false);

    //---------- Get sum of derivatives
    sumderiv = 0;
    for (ALIuint ii = 0; ii < theDim; ii++) {
      sumderiv += std::abs(theValueSimulated[ii] - theValueSimulated_orig[ii]);
      if (ALIUtils::debug >= 4) {
        std::cout << "iteration " << count_itera << " COOR " << ii << " difference ="
                  << (theValueSimulated[ii] - theValueSimulated_orig[ii])
                  //-             << "  " << theValueSimulated[ii] << "  " << theValueSimulated_orig[ii]
                  << " derivative = " << (theValueSimulated[ii] - theValueSimulated_orig[ii]) / displacement << " disp "
                  << displacement << " sum derivatives = " << sumderiv << std::endl;
      }
      if (ALIUtils::debug >= 5) {
        std::cout << " new simu value= " << theValueSimulated[ii] << " orig simu value " << theValueSimulated_orig[ii]
                  << std::endl;
      }
    }
    if (count_itera >= 100) {
      std::cerr << "EXITING: too many iterations in derivative, displacement is " << displacement
                << " sum of derivatives is " << sumderiv << std::endl;
      exit(3);
    }
    displacement /= 2.;
    //-    std::cout << "sumderiv " << sumderiv << " maximu " <<  Fit::maximum_deviation_derivative << std::endl;
  } while (sumderiv > ALIUtils::getMaximumDeviationDerivative());
  displacement *= 2;

  //---------- Enough precision reached: pass result
  for (ALIuint ii = 0; ii < theDim; ii++) {
    deriv.push_back((theValueSimulated[ii] - theValueSimulated_orig[ii]) / displacement);
    //----- change it to entry sigma dimensions
    //     deriv[ii] /= entry->SigmaDimensionFactor();
    if (ALIUtils::debug >= 1)
      std::cout << name() << ": " << entry->OptOCurrent()->name() << " " << entry->name() << " " << ii
                << "### DERIVATIVE: " << deriv[ii] << std::endl;
  }
  //-  if(ALIUtils::debug >= 5) std::cout << "END derivative: " << deriv << "disp" << displacement << std::endl;

  //--------------------- Reset _centreGlob and _rmGlob of OptO entry belongs to (and component OptOs)
  entry->OptOCurrent()->resetGlobalCoordinates();

  return deriv;
}

dim()

const ALIuint Measurement::dim ( ) const

inline

Definition at line 82 of file Measurement.h.

References theDim.

Referenced by calculateOriginalSimulatedValue(), construct(), constructFromOA(), copyMeas(), MeasurementCOPS::correctValueAndSigma(), CocoaToDDLMgr::measurementsAsSpecPars(), Model::readMeasurementsFromFile(), CocoaDaqReaderText::ReadNextEvent(), MeasurementCOPS::setConversionFactor(), and SetDimension().

{ return theDim; }

DumpBadOrderOptOs()

void Measurement::DumpBadOrderOptOs

(

)

Definition at line 469 of file Measurement.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, ALIUtils::debug, beamvalidation::exit(), and OptONameList().

Referenced by MeasurementSensor2D::calculateSimulatedValue(), MeasurementDistancemeter::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), MeasurementDiffEntry::calculateSimulatedValue(), MeasurementCOPS::calculateSimulatedValue(), and MeasurementTiltmeter::calculateSimulatedValue().

                                    {
  std::cerr << " Detector can not make measurement with these optical objects " << std::endl;
  if (ALIUtils::debug >= 1) {
    //  std::vector<OpticalObject*>::iterator voite;
    //      for ( voite = _OptOList.begin();
    //     voite != _OptOList.end(); voite++) {
    //    std::cout << (*voite)->type() << " : " << (*voite)->name() << std::endl;
    // }
    std::vector<ALIstring>::const_iterator vsite;
    for (vsite = OptONameList().begin(); vsite != OptONameList().end(); ++vsite) {
      std::cerr << (*vsite) << " : ";
    }
    std::cerr << std::endl;
  }
  exit(2);
}

fillData() [1/2]

void Measurement::fillData	(	ALIuint	coor,
		const std::vector< ALIstring > &	wl
	)

Definition at line 192 of file Measurement.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, filterCSVwithJSON::copy, gather_cfg::cout, ALIUtils::debug, beamvalidation::exit(), ParameterMgr::getInstance(), ParameterMgr::getParameterValue(), ALIUtils::IsNumber(), sigmaDimensionFactor(), theDim, theSigma, theValue, theValueIsSimulated, theValueType, heppy_batch::val, and valueDimensionFactor().

Referenced by construct(), constructFromOA(), Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().

                                                                             {
  if (ALIUtils::debug >= 3) {
    std::cout << "@@ Filling coordinate " << coor << std::endl;
    //-   ostream_iterator<ALIstring> outs(std::cout," ");
    //-  copy(wordlist.begin(), wordlist.end(), outs);
  }

  ParameterMgr* parmgr = ParameterMgr::getInstance();

  //---------- Check that there are 3 attributes: name, value, error
  if (wordlist.size() != 3) {
    //    ALIFileIn::getInstance( Model::SDFName() ).ErrorInLine();
    std::cerr << " Incorrect format for Measurement value:" << std::endl;
    std::ostream_iterator<ALIstring> outs(std::cout, " ");
    copy(wordlist.begin(), wordlist.end(), outs);
    std::cout << std::endl << "There should be three words: name value sigma " << std::endl;
    exit(2);
  }

  //---------- check coor value
  if (coor >= theDim) {
    // ALIFileIn::getInstance( Model::SDFName() ).ErrorInLine();
    std::cerr << "Trying to fill Measurement coordinate No " << coor << " but the dimension is " << theDim << std::endl;
    exit(2);
  }

  //---------- set data members
  //----- Set valueType
  theValueType[coor] = wordlist[0];

  //----- Set value (translate it if a PARAMETER is used)
  ALIdouble val = 0.;
  theValueIsSimulated[coor] = false;
  if (!ALIUtils::IsNumber(wordlist[1])) {
    if (parmgr->getParameterValue(wordlist[1], val) == 0) {
      if (wordlist[1] == ALIstring("simulated_value")) {
        theValueIsSimulated[coor] = true;
      } else {
        //      ALIFileIn::getInstance( Model::SDFName() ).ErrorInLine();
        std::cerr << "!!! parameter for value not found: " << wordlist[1].c_str() << std::endl;
        exit(2);
      }
    }
    //d val *= valueDimensionFactor();
  } else {
    //d val = DimensionMgr()::getInstance()->extractValue( wordlist[1], ValueDimensionFactor() );
    val = atof(wordlist[1].c_str());
  }
  val *= valueDimensionFactor();
  if (ALIUtils::debug >= 3)
    std::cout << "Meas VALUE= " << val << " (ValueDimensionFactor= " << valueDimensionFactor() << std::endl;

  //----- Set sigma (translate it if a PARAMETER is used)
  ALIdouble sig = 0.;
  if (!ALIUtils::IsNumber(wordlist[2])) {
    if (parmgr->getParameterValue(wordlist[2], sig) == 0) {
      // ALIFileIn::getInstance( Model::SDFName() ).ErrorInLine();
      std::cerr << "!!! parameter for sigma not found: " << wordlist[2].c_str() << std::endl;
      exit(2);
    }
    //d sig *= sigmaDimensionFactor();
  } else {
    //    sig = DimensionMgr()::getInstance()->extractValue( wordlist[2], ValueDimensionFactor() );
    sig = atof(wordlist[2].c_str());
  }
  sig *= sigmaDimensionFactor();
  if (ALIUtils::debug >= 3)
    std::cout << "SIGMA= " << sig << " (SigmaDimensionFactor= " << sigmaDimensionFactor() << std::endl;

  //----- set theValue & theSigma
  theValue[coor] = val;
  theSigma[coor] = sig;
}

fillData() [2/2]

void Measurement::fillData	(	ALIuint	coor,
		OpticalAlignParam *	oaParam
	)

Definition at line 267 of file Measurement.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, gather_cfg::cout, ALIUtils::debug, beamvalidation::exit(), GlobalOptionMgr::getInstance(), GlobalOptionMgr::GlobalOptions(), OpticalAlignParam::sigma(), sigmaDimensionFactor(), theDim, theSigma, theValue, theValueIsSimulated, heppy_batch::val, OpticalAlignParam::value(), and valueDimensionFactor().

                                                                   {
  if (ALIUtils::debug >= 3) {
    std::cout << "@@ Filling coordinate " << coor << std::endl;
  }

  //  ParameterMgr* parmgr = ParameterMgr::getInstance();

  //---------- check coor value
  if (coor >= theDim) {
    std::cerr << "Trying to fill Measurement coordinate No " << coor << " but the dimension is " << theDim << std::endl;
    exit(2);
  }

  //---------- set data members
  //----- Set value (translate it if a PARAMETER is used)
  ALIdouble val = 0.;
  theValueIsSimulated[coor] = false;
  val = oaParam->value();
  val *= valueDimensionFactor();
  theValue[coor] = val;
  if (ALIUtils::debug >= 3)
    std::cout << "Meas VALUE= " << val << " (ValueDimensionFactor= " << valueDimensionFactor() << std::endl;

  ALIbool sigmaFF = GlobalOptionMgr::getInstance()->GlobalOptions()["measurementErrorFromFile"];
  if (sigmaFF) {
    //----- Set sigma (translate it if a PARAMETER is used)
    ALIdouble sig = 0.;
    sig = oaParam->sigma();  // it is in mm always
    sig *= sigmaDimensionFactor();
    theSigma[coor] = sig;
    if (ALIUtils::debug >= 3)
      std::cout << "SIGMA= " << sig << " (SigmaDimensionFactor= " << sigmaDimensionFactor() << std::endl;
  }
}

getCurrentDate()

static ALIstring Measurement::getCurrentDate ( )

inlinestatic

Definition at line 122 of file Measurement.h.

References theCurrentDate.

Referenced by FittedEntriesSet::FittedEntriesSet().

{ return theCurrentDate; }

getCurrentTime()

static ALIstring Measurement::getCurrentTime ( )

inlinestatic

Definition at line 123 of file Measurement.h.

References theCurrentTime.

Referenced by FittedEntriesSet::FittedEntriesSet().

{ return theCurrentTime; }

getLightRayDirection()

const CLHEP::Hep3Vector& Measurement::getLightRayDirection ( ) const

inline

Definition at line 126 of file Measurement.h.

References theLightRayDirection.

{ return theLightRayDirection; }

getLightRayPosition()

const CLHEP::Hep3Vector& Measurement::getLightRayPosition ( ) const

inline

Definition at line 125 of file Measurement.h.

References theLightRayPosition.

{ return theLightRayPosition; }

getMeasuringBehaviour()

ALIstring Measurement::getMeasuringBehaviour

(

const std::vector< OpticalObject *>::const_iterator

vocite

)

Definition at line 568 of file Measurement.cc.

References _OptOList, and _OptONameList.

Referenced by MeasurementSensor2D::calculateSimulatedValue(), MeasurementDistancemeter::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), MeasurementCOPS::calculateSimulatedValue(), and MeasurementTiltmeter::calculateSimulatedValue().

                                                                                                 {
  std::vector<ALIstring>::const_iterator vscite =
      _OptONameList.begin() + (vocite - _OptOList.begin());  // point to corresponding name of this OptO
  ALIint colon = (*vscite).find(':');
  ALIstring behav;
  if (colon != -1) {
    behav = (*vscite).substr(colon + 1, (*vscite).size());
  } else {
    behav = " ";
  }
  return behav;
}

getPreviousOptO()

const OpticalObject * Measurement::getPreviousOptO

(

const OpticalObject *

Popto

)

const

Definition at line 584 of file Measurement.cc.

References _OptOList, EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, beamvalidation::exit(), OpticalObject::name(), and name().

Referenced by OptODistancemeter::makeMeasurement(), and OptODistancemeter3dim::makeMeasurement().

                                                                                  {
  //--------- Loop OptOs that take part in this measurement
  std::vector<OpticalObject*>::const_iterator vocite;
  for (vocite = _OptOList.begin(); vocite != _OptOList.end(); ++vocite) {
    if (*vocite == Popto) {
      if (vocite == _OptOList.begin()) {
        std::cerr << " ERROR in  getPreviousOptO of measurement " << name() << std::endl;
        std::cerr << " OptO " << Popto->name() << " is the first one " << std::endl;
        exit(1);
      } else {
        return *(vocite - 1);
      }
    }
  }

  std::cerr << " ERROR in  getPreviousOptO of measurement " << name() << std::endl;
  std::cerr << " OptO " << Popto->name() << " not found " << std::endl;
  exit(1);
}

measurementsFileName()

static ALIstring& Measurement::measurementsFileName ( )

inlinestatic

Definition at line 162 of file Measurement.h.

References theMeasurementsFileName.

Referenced by Model::readMeasurementsFromFile().

{ return theMeasurementsFileName; }

name()

const ALIstring& Measurement::name ( ) const

inline

Definition at line 86 of file Measurement.h.

References theName.

Referenced by config.CFG::__str__(), MeasurementSensor2D::calculateSimulatedValue(), MeasurementDistancemeter::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), MeasurementDiffEntry::calculateSimulatedValue(), MeasurementCOPS::calculateSimulatedValue(), MeasurementTiltmeter::calculateSimulatedValue(), construct(), constructFromOA(), copyMeas(), Model::copyMeasurements(), DerivativeRespectEntry(), validation.Sample::digest(), getPreviousOptO(), VIDSelectorBase.VIDSelectorBase::initialize(), CocoaToDDLMgr::measurementsAsSpecPars(), printStartCalculateSimulatedValue(), and OptOUserDefined::userDefinedBehaviour().

{ return theName; }

OptOList()

const std::vector<OpticalObject*>& Measurement::OptOList ( ) const

inline

Definition at line 101 of file Measurement.h.

References _OptOList.

Referenced by MeasurementSensor2D::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), MeasurementDistancemeter::calculateSimulatedValue(), MeasurementCOPS::calculateSimulatedValue(), MeasurementDiffEntry::calculateSimulatedValue(), MeasurementTiltmeter::calculateSimulatedValue(), copyMeas(), and OptOCOPS::makeMeasurement().

{ return _OptOList; }

OptONameList()

const std::vector<ALIstring>& Measurement::OptONameList ( ) const

inline

Definition at line 99 of file Measurement.h.

References _OptONameList.

Referenced by DumpBadOrderOptOs(), and CocoaToDDLMgr::measurementsAsSpecPars().

{ return _OptONameList; }

postConstruct()

void Measurement::postConstruct

(

)

Definition at line 153 of file Measurement.cc.

References Model::addMeasurementToList(), buildAffectingEntryList(), buildOptOList(), gather_cfg::cout, ALIUtils::debug, Model::MeasurementList(), and setName().

Referenced by construct(), constructFromOA(), and copyMeas().

                                {
  //---------- Set name as name of last OptO
  setName();

  //---------- Transform for each Measurement the Measured OptO names to Measured OptO pointers
  buildOptOList();

  //---------- Build list of Entries that affect a Measurement
  buildAffectingEntryList();

  //---------- add this measurement to the global list of measurements
  Model::addMeasurementToList(this);

  if (ALIUtils::debug >= 10) {
    std::cout << Model::MeasurementList().size() << std::endl;
  }
}

printStartCalculateSimulatedValue()

void Measurement::printStartCalculateSimulatedValue ( const Measurement *  meas )

protected

Definition at line 427 of file Measurement.cc.

References gather_cfg::cout, name(), and type().

Referenced by MeasurementSensor2D::calculateSimulatedValue(), MeasurementDistancemeter::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), MeasurementDiffEntry::calculateSimulatedValue(), MeasurementCOPS::calculateSimulatedValue(), and MeasurementTiltmeter::calculateSimulatedValue().

                                                                           {
  std::cout << std::endl
            << "@@@ Start calculation of simulated value of " << meas->type() << " Measurement " << meas->name()
            << std::endl;
}

sensorName()

const ALIstring& Measurement::sensorName ( )

inline

Definition at line 88 of file Measurement.h.

References theName.

                                {
    ALIstring sensName = theName;
    ALIint colon = theName.find(':');
    theName = theName.substr(colon + 1, theName.length() - colon);
    return theName;
  }

setConversionFactor()

virtual void Measurement::setConversionFactor ( const std::vector< ALIstring > &  wordlist )

inlinevirtual

Reimplemented in MeasurementTiltmeter, MeasurementCOPS, MeasurementSensor2D, MeasurementDistancemeter, and MeasurementDistancemeter3dim.

Definition at line 69 of file Measurement.h.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, and beamvalidation::exit().

Referenced by Model::readSystemDescription().

                                                                         {
    std::cerr << " Measurement::setConversionFactor should never be called " << std::endl;
    exit(1);
  };

setCurrentDate()

void Measurement::setCurrentDate ( const std::vector< ALIstring > &  wl )

static

set the date of the current measurement

Definition at line 605 of file Measurement.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, ALIUtils::dumpVS(), beamvalidation::exit(), theCurrentDate, theCurrentTime, and LaserClient_cfi::wl.

Referenced by Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().

                                                               {
  if (wl.size() != 3) {
    std::cerr << "!!!EXITING: reading DATE of measurements set: it must have three words, it is though " << std::endl;
    ALIUtils::dumpVS(wl, " ");
    exit(1);
  } else if (wl[0] != "DATE:") {
    std::cerr << "!!!EXITING: reading DATE of measurements set: first word must be 'DATE:', it is though " << std::endl;
    ALIUtils::dumpVS(wl, " ");
    exit(1);
  } else {
    theCurrentDate = wl[1];
    theCurrentTime = wl[2];
  }
}

SetDimension()

void Measurement::SetDimension ( ALIuint  dim )

inline

Definition at line 138 of file Measurement.h.

References dim(), and theDim.

{ theDim = dim; }

setLightRayDirection()

void Measurement::setLightRayDirection ( const CLHEP::Hep3Vector &  lightRayDirection )

inline

Definition at line 170 of file Measurement.h.

References theLightRayDirection.

Referenced by OptOSensor2D::makeMeasurement().

{ theLightRayDirection = lightRayDirection; }

setLightRayPosition()

void Measurement::setLightRayPosition ( const CLHEP::Hep3Vector &  lightRayPosition )

inline

Definition at line 169 of file Measurement.h.

References theLightRayPosition.

Referenced by OptOSensor2D::makeMeasurement().

{ theLightRayPosition = lightRayPosition; }

setMeasurementsFileName()

static void Measurement::setMeasurementsFileName ( const ALIstring &  filename )

inlinestatic

Definition at line 163 of file Measurement.h.

References corrVsCorr::filename, and theMeasurementsFileName.

                                                                 {
    //-   std::cout << " setting file name " << filename << std::endl;
    theMeasurementsFileName = filename;
    //-   std::cout << " dsetting file name " << filename << std::endl;
  }

setName()

void Measurement::setName

(

)

Definition at line 665 of file Measurement.cc.

References _OptONameList, EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, beamvalidation::exit(), theName, and type().

Referenced by postConstruct().

                          {
  // name already set by passing one argument with sensor type
  if (!theName.empty())
    return;
  if (_OptONameList.empty()) {
    std::cerr
        << " !!! Error in your code, you cannot ask for the name of the Measurement before the OptONameList is build "
        << std::endl;
    exit(9);
  }
  std::vector<ALIstring>::iterator vsite = (_OptONameList.end() - 1);
  theName = type() + ":" + (*vsite);
}

setSigma()

void Measurement::setSigma ( ALIint  coor, ALIdouble  val  )

inline

Definition at line 131 of file Measurement.h.

References theSigma, and heppy_batch::val.

Referenced by MeasurementDistancemeter::correctValueAndSigma(), MeasurementDistancemeter3dim::correctValueAndSigma(), MeasurementTiltmeter::correctValueAndSigma(), Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().

                                            {
    theSigma[coor] = val;
    //-    std::cout << coor << " setting sigma " << theSigma[coor] << std::endl;
  }

setType()

void Measurement::setType ( ALIstring  type )

inline

Definition at line 136 of file Measurement.h.

References theType, and type().

{ theType = type; }

setValue()

void Measurement::setValue ( ALIint  coor, ALIdouble  val  )

inline

Definition at line 129 of file Measurement.h.

References theValue, and heppy_batch::val.

Referenced by calculateOriginalSimulatedValue(), MeasurementSensor2D::correctValueAndSigma(), MeasurementCOPS::correctValueAndSigma(), MeasurementDistancemeter3dim::correctValueAndSigma(), MeasurementDistancemeter::correctValueAndSigma(), and MeasurementTiltmeter::correctValueAndSigma().

{ theValue[coor] = val; }

setValueSimulated()

void Measurement::setValueSimulated ( ALIint  coor, ALIdouble  value  )

inline

Definition at line 146 of file Measurement.h.

References theValueSimulated, and value().

Referenced by MeasurementDiffEntry::calculateSimulatedValue(), OptOTiltmeter::makeMeasurement(), OptOSensor2D::makeMeasurement(), OptODistancemeter3dim::makeMeasurement(), OptODistancemeter::makeMeasurement(), and OptOCOPS::makeMeasurement().

{ theValueSimulated[coor] = value; }

setValueSimulated_orig()

void Measurement::setValueSimulated_orig ( ALIint  coor, ALIdouble  value  )

inline

Definition at line 144 of file Measurement.h.

References theValueSimulated_orig, and value().

Referenced by calculateOriginalSimulatedValue().

{ theValueSimulated_orig[coor] = value; }

setXlaserLine()

virtual void Measurement::setXlaserLine ( ALIuint  ii, int  val  )

inlinevirtual

Reimplemented in MeasurementCOPS.

Definition at line 158 of file Measurement.h.

Referenced by OptOCOPS::makeMeasurement().

{};

sigma() [1/2]

const ALIdouble* Measurement::sigma ( ) const

inline

Definition at line 112 of file Measurement.h.

References theSigma.

Referenced by copyMeas(), MeasurementDistancemeter3dim::correctValueAndSigma(), MeasurementDistancemeter::correctValueAndSigma(), MeasurementTiltmeter::correctValueAndSigma(), CocoaToDDLMgr::measurementsAsSpecPars(), Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().

{ return theSigma; }

sigma() [2/2]

const ALIdouble Measurement::sigma ( ALIuint  ii ) const

inline

Definition at line 114 of file Measurement.h.

References cuy::ii, and theSigma.

{ return theSigma[ii]; }

sigmaDimensionFactor()

virtual const ALIdouble Measurement::sigmaDimensionFactor ( ) const

inlinevirtual

Definition at line 120 of file Measurement.h.

References ALIUtils::LengthSigmaDimensionFactor().

Referenced by constructFromOA(), fillData(), and MeasurementTiltmeter::setConversionFactor().

{ return ALIUtils::LengthSigmaDimensionFactor(); }

Substitute2p()

void Measurement::Substitute2p ( ALIstring &  ref, const ALIstring &  firstref, int  NtwoPoints  )

protected

Definition at line 406 of file Measurement.cc.

References gather_cfg::cout, ALIUtils::debug, cuy::ii, and pickleFileParser::slash.

Referenced by buildOptOList().

                                                                                        {
  // '/' sets hierarchy of OptOs
  ALIstring slash("/");

  int pos1st = firstref.length();
  // Go back an '/' in firstref for each '..' in ref
  for (int ii = 0; ii < Ntwopoints; ii++) {
    pos1st = firstref.find_last_of(slash, pos1st - 1);
    if (ALIUtils::debug >= 9)
      std::cout << "pos1st=" << pos1st;
  }

  if (ALIUtils::debug >= 9)
    std::cout << "before change ref: " << ref << " 1ref " << firstref << std::endl;
  // Substitute name
  ref.replace(0, (Ntwopoints * 3) - 1, firstref, 0, pos1st);
  if (ALIUtils::debug >= 9)
    std::cout << "after change ref: " << ref << " 1ref " << firstref << std::endl;
}

type()

const ALIstring& Measurement::type ( ) const

inline

Definition at line 84 of file Measurement.h.

References theType.

Referenced by MeasurementDistancemeter::calculateSimulatedValue(), MeasurementDistancemeter3dim::calculateSimulatedValue(), MeasurementCOPS::calculateSimulatedValue(), construct(), constructFromOA(), copyMeas(), Model::copyMeasurements(), CocoaToDDLMgr::measurementsAsSpecPars(), printStartCalculateSimulatedValue(), setName(), and setType().

{ return theType; }

value() [1/2]

const ALIdouble* Measurement::value ( ) const

inline

Definition at line 109 of file Measurement.h.

References theValue.

Referenced by Types.int32::__nonzero__(), Types.uint32::__nonzero__(), Types.int64::__nonzero__(), Types.uint64::__nonzero__(), Types.double::__nonzero__(), Types.bool::__nonzero__(), Types.string::__nonzero__(), average.Average::average(), MeasurementDiffEntry::calculateSimulatedValue(), Types.string::configValue(), Types.FileInPath::configValue(), copyMeas(), MeasurementSensor2D::correctValueAndSigma(), MeasurementCOPS::correctValueAndSigma(), MeasurementDistancemeter::correctValueAndSigma(), MeasurementDistancemeter3dim::correctValueAndSigma(), MeasurementTiltmeter::correctValueAndSigma(), Mixins.UsingBlock::dumpPython(), OptOSensor2D::fastTraversesLightRay(), Mixins.UsingBlock::insertInto(), Types.int32::insertInto(), Types.uint32::insertInto(), Types.int64::insertInto(), Types.uint64::insertInto(), Types.double::insertInto(), Types.bool::insertInto(), Types.string::insertInto(), Types.FileInPath::insertInto(), Types.vint32::insertInto(), Types.vuint32::insertInto(), Types.vint64::insertInto(), Types.vuint64::insertInto(), Types.vdouble::insertInto(), Types.vbool::insertInto(), Types.vstring::insertInto(), OptOTiltmeter::makeMeasurement(), OptODistancemeter::makeMeasurement(), OptODistancemeter3dim::makeMeasurement(), OptOSensor2D::makeMeasurement(), OptOCOPS::makeMeasurement(), CocoaToDDLMgr::measurementsAsSpecPars(), setValueSimulated(), and setValueSimulated_orig().

{ return theValue; }

value() [2/2]

const ALIdouble Measurement::value ( ALIuint  ii ) const

inline

Definition at line 110 of file Measurement.h.

References cuy::ii, and theValue.

Referenced by Types.int32::__nonzero__(), Types.uint32::__nonzero__(), Types.int64::__nonzero__(), Types.uint64::__nonzero__(), Types.double::__nonzero__(), Types.bool::__nonzero__(), Types.string::__nonzero__(), average.Average::average(), Types.string::configValue(), Types.FileInPath::configValue(), Mixins.UsingBlock::dumpPython(), Mixins.UsingBlock::insertInto(), Types.int32::insertInto(), Types.uint32::insertInto(), Types.int64::insertInto(), Types.uint64::insertInto(), Types.double::insertInto(), Types.bool::insertInto(), Types.string::insertInto(), Types.FileInPath::insertInto(), Types.vint32::insertInto(), Types.vuint32::insertInto(), Types.vint64::insertInto(), Types.vuint64::insertInto(), Types.vdouble::insertInto(), Types.vbool::insertInto(), and Types.vstring::insertInto().

{ return theValue[ii]; }

valueDimensionFactor()

virtual const ALIdouble Measurement::valueDimensionFactor ( ) const

inlinevirtual

Definition at line 118 of file Measurement.h.

References ALIUtils::LengthValueDimensionFactor().

Referenced by constructFromOA(), fillData(), MeasurementSensor2D::setConversionFactor(), MeasurementCOPS::setConversionFactor(), and MeasurementTiltmeter::setConversionFactor().

{ return ALIUtils::LengthValueDimensionFactor(); }

valueIsSimulated()

bool Measurement::valueIsSimulated ( ALIint  coor )

inline

Definition at line 156 of file Measurement.h.

References theValueIsSimulated.

Referenced by calculateOriginalSimulatedValue(), construct(), copyMeas(), and CocoaToDDLMgr::measurementsAsSpecPars().

{ return theValueIsSimulated[coor]; }

valueSimulated()

const ALIdouble Measurement::valueSimulated ( ALIuint  ii ) const

inline

Definition at line 105 of file Measurement.h.

References cuy::ii, and theValueSimulated.

Referenced by calculateOriginalSimulatedValue(), MeasurementDiffEntry::calculateSimulatedValue(), copyMeas(), OptOTiltmeter::makeMeasurement(), OptODistancemeter::makeMeasurement(), OptOSensor2D::makeMeasurement(), OptODistancemeter3dim::makeMeasurement(), and OptOCOPS::makeMeasurement().

{ return theValueSimulated[ii]; }

valueSimulated_orig()

const ALIdouble Measurement::valueSimulated_orig ( ALIuint  ii ) const

inline

Definition at line 107 of file Measurement.h.

References cuy::ii, and theValueSimulated_orig.

Referenced by copyMeas().

{ return theValueSimulated_orig[ii]; }

valueType()

const ALIstring Measurement::valueType ( ALIuint  ii ) const

inline

Definition at line 116 of file Measurement.h.

References cuy::ii, and theValueType.

Referenced by OptOSensor2D::makeMeasurement(), CocoaToDDLMgr::measurementsAsSpecPars(), Model::readMeasurementsFromFile(), and CocoaDaqReaderText::ReadNextEvent().

{ return theValueType[ii]; }

xlaserLine()

virtual int Measurement::xlaserLine ( ALIuint  ii )

inlinevirtual

Reimplemented in MeasurementCOPS.

Definition at line 147 of file Measurement.h.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr.

Referenced by OptOCOPS::makeMeasurement().

                                     {
    std::cerr << "!!!! Measurement::xlaserLine is not returning anything " << std::endl;
    abort();
  };

Member Data Documentation

_OptOList

std::vector<OpticalObject*> Measurement::_OptOList

private

Definition at line 200 of file Measurement.h.

Referenced by AddOptOListItem(), buildAffectingEntryList(), buildOptOList(), getMeasuringBehaviour(), getPreviousOptO(), and OptOList().

_OptONameList

std::vector<ALIstring> Measurement::_OptONameList

private

Definition at line 198 of file Measurement.h.

Referenced by AddOptONameListItem(), buildOptOList(), buildOptONamesList(), constructFromOA(), getMeasuringBehaviour(), OptONameList(), and setName().

cameraScaleFactor

ALIdouble Measurement::cameraScaleFactor = 1.

static

Definition at line 158 of file Measurement.h.

Referenced by Fit::FillMatricesWithMeasurements().

only1

ALIbool Measurement::only1 = false

static

Definition at line 212 of file Measurement.h.

Referenced by Fit::fitNextEvent(), Model::readMeasurementsFromFile(), and Model::readSystemDescription().

only1Date

ALIstring Measurement::only1Date = ""

static

Definition at line 213 of file Measurement.h.

Referenced by Model::readMeasurementsFromFile(), and Model::readSystemDescription().

only1Time

ALIstring Measurement::only1Time = ""

static

Definition at line 214 of file Measurement.h.

Referenced by Model::readMeasurementsFromFile(), and Model::readSystemDescription().

theAffectingEntryList

std::vector<Entry*> Measurement::theAffectingEntryList

private

Definition at line 202 of file Measurement.h.

Referenced by addAffectingEntriesFromOptO(), and affectingEntryList().

theCurrentDate

ALIstring Measurement::theCurrentDate = "99/99/99"

staticprivate

Definition at line 208 of file Measurement.h.

Referenced by getCurrentDate(), and setCurrentDate().

theCurrentTime

ALIstring Measurement::theCurrentTime = "99:99"

staticprivate

Definition at line 209 of file Measurement.h.

Referenced by getCurrentTime(), and setCurrentDate().

theDim

ALIuint Measurement::theDim

private

Definition at line 179 of file Measurement.h.

Referenced by copyMeas(), DerivativeRespectEntry(), dim(), fillData(), Measurement(), and SetDimension().

theLightRayDirection

CLHEP::Hep3Vector Measurement::theLightRayDirection

private

Definition at line 205 of file Measurement.h.

Referenced by getLightRayDirection(), and setLightRayDirection().

theLightRayPosition

CLHEP::Hep3Vector Measurement::theLightRayPosition

private

Definition at line 204 of file Measurement.h.

Referenced by getLightRayPosition(), and setLightRayPosition().

theMeasurementsFileName

ALIstring Measurement::theMeasurementsFileName = ""

staticprivate

Definition at line 206 of file Measurement.h.

Referenced by measurementsFileName(), and setMeasurementsFileName().

theName

ALIstring Measurement::theName

private

Definition at line 183 of file Measurement.h.

Referenced by copyMeas(), name(), sensorName(), and setName().

theSigma

ALIdouble* Measurement::theSigma

private

Definition at line 182 of file Measurement.h.

Referenced by copyMeas(), fillData(), Measurement(), setSigma(), sigma(), and ~Measurement().

theType

ALIstring Measurement::theType

private

Definition at line 180 of file Measurement.h.

Referenced by copyMeas(), setType(), and type().

theValue

ALIdouble* Measurement::theValue

private

Definition at line 181 of file Measurement.h.

Referenced by copyMeas(), fillData(), Measurement(), setValue(), value(), and ~Measurement().

theValueIsSimulated

ALIbool* Measurement::theValueIsSimulated

private

Definition at line 195 of file Measurement.h.

Referenced by copyMeas(), fillData(), Measurement(), and valueIsSimulated().

theValueSimulated

ALIdouble* Measurement::theValueSimulated

private

Definition at line 187 of file Measurement.h.

Referenced by copyMeas(), DerivativeRespectEntry(), Measurement(), setValueSimulated(), and valueSimulated().

theValueSimulated_orig

ALIdouble* Measurement::theValueSimulated_orig

private

Definition at line 189 of file Measurement.h.

Referenced by copyMeas(), DerivativeRespectEntry(), Measurement(), setValueSimulated_orig(), and valueSimulated_orig().

theValueType

ALIstring* Measurement::theValueType

private

Definition at line 184 of file Measurement.h.

Referenced by fillData(), Measurement(), and valueType().