#include <EwkDQM.h>

Inheritance diagram for EwkDQM:

Public Member Functions
void	analyze (const edm::Event &, const edm::EventSetup &) override
	Get the analysis. More...

void	bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override

double	calcDeltaPhi (double phi1, double phi2)

void	dqmBeginRun (const edm::Run &, const edm::EventSetup &) override

	EwkDQM (const edm::ParameterSet &)
	Constructor. More...

	~EwkDQM () override
	Destructor. More...

Public Member Functions inherited from DQMEDAnalyzer
void	accumulate (edm::Event const &event, edm::EventSetup const &setup) final

void	beginLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final

void	beginRun (edm::Run const &run, edm::EventSetup const &setup) final

void	beginStream (edm::StreamID id) final

	DQMEDAnalyzer ()

void	endLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final

void	endRun (edm::Run const &run, edm::EventSetup const &setup) final

virtual bool	getCanSaveByLumi ()

Public Member Functions inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
	EDProducer ()=default

	EDProducer (const EDProducer &)=delete

bool	hasAbilityToProduceInBeginLumis () const final

bool	hasAbilityToProduceInBeginProcessBlocks () const final

bool	hasAbilityToProduceInBeginRuns () const final

bool	hasAbilityToProduceInEndLumis () const final

bool	hasAbilityToProduceInEndProcessBlocks () const final

bool	hasAbilityToProduceInEndRuns () const final

const EDProducer &	operator= (const EDProducer &)=delete

Private Attributes
double	eJetMin_

MonitorElement *	h_e1_et

MonitorElement *	h_e1_eta

MonitorElement *	h_e1_phi

MonitorElement *	h_e2_et

MonitorElement *	h_e2_eta

MonitorElement *	h_e2_phi

MonitorElement *	h_e_invWMass

MonitorElement *	h_ee_invMass

MonitorElement *	h_jet2_et

MonitorElement *	h_jet2_eta

MonitorElement *	h_jet2_phi

MonitorElement *	h_jet_count

MonitorElement *	h_jet_et

MonitorElement *	h_jet_eta

MonitorElement *	h_jet_phi

MonitorElement *	h_jet_pt

MonitorElement *	h_m1_eta

MonitorElement *	h_m1_phi

MonitorElement *	h_m1_pt

MonitorElement *	h_m2_eta

MonitorElement *	h_m2_phi

MonitorElement *	h_m2_pt

MonitorElement *	h_m_invWMass

MonitorElement *	h_met

MonitorElement *	h_met_phi

MonitorElement *	h_mumu_invMass

MonitorElement *	h_vertex_chi2

MonitorElement *	h_vertex_d0

MonitorElement *	h_vertex_number

MonitorElement *	h_vertex_numTrks

MonitorElement *	h_vertex_sumTrks

HLTConfigProvider	hltConfigProvider_

bool	isValidHltConfig_

std::string	logTraceName

edm::InputTag	theCaloMETCollectionLabel_

edm::EDGetTokenT< edm::View< reco::MET > >	theCaloMETCollectionToken_

std::vector< std::string >	theElecTriggerPathToPass_

edm::EDGetTokenT< reco::GsfElectronCollection >	theElectronCollectionLabel_

edm::EDGetTokenT< reco::MuonCollection >	theMuonCollectionLabel_

std::vector< std::string >	theMuonTriggerPathToPass_

edm::InputTag	thePFJetCollectionLabel_

edm::EDGetTokenT< edm::View< reco::Jet > >	thePFJetCollectionToken_

edm::InputTag	theTriggerResultsCollection_

edm::EDGetTokenT< edm::TriggerResults >	theTriggerResultsToken_

edm::EDGetTokenT< reco::VertexCollection >	theVertexToken_

Additional Inherited Members
Public Types inherited from DQMEDAnalyzer
typedef dqm::reco::DQMStore	DQMStore

typedef dqm::reco::MonitorElement	MonitorElement

Public Types inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
using	CacheTypes = CacheContexts< T... >

using	GlobalCache = typename CacheTypes::GlobalCache

using	HasAbility = AbilityChecker< T... >

using	InputProcessBlockCache = typename CacheTypes::InputProcessBlockCache

using	LuminosityBlockCache = typename CacheTypes::LuminosityBlockCache

using	LuminosityBlockContext = LuminosityBlockContextT< LuminosityBlockCache, RunCache, GlobalCache >

using	LuminosityBlockSummaryCache = typename CacheTypes::LuminosityBlockSummaryCache

using	RunCache = typename CacheTypes::RunCache

using	RunContext = RunContextT< RunCache, GlobalCache >

using	RunSummaryCache = typename CacheTypes::RunSummaryCache

Static Public Member Functions inherited from DQMEDAnalyzer
static void	globalEndJob (DQMEDAnalyzerGlobalCache const *)

static void	globalEndLuminosityBlockProduce (edm::LuminosityBlock &lumi, edm::EventSetup const &setup, LuminosityBlockContext const *context)

static void	globalEndRunProduce (edm::Run &run, edm::EventSetup const &setup, RunContext const *context)

static std::unique_ptr< DQMEDAnalyzerGlobalCache >	initializeGlobalCache (edm::ParameterSet const &)

Protected Member Functions inherited from DQMEDAnalyzer
uint64_t	meId () const

Protected Attributes inherited from DQMEDAnalyzer
edm::EDPutTokenT< DQMToken >	lumiToken_

edm::EDPutTokenT< DQMToken >	runToken_

unsigned int	streamId_

Detailed Description

DQM offline for SMP V+Jets

Author: Valentina Gori, University of Firenze

Definition at line 29 of file EwkDQM.h.

Constructor & Destructor Documentation

◆ EwkDQM()

EwkDQM::EwkDQM ( const edm::ParameterSet & parameters )

Constructor.

Definition at line 43 of file EwkDQM.cc.

                                              {
   eJetMin_ = parameters.getUntrackedParameter<double>("EJetMin", 999999.);
 
   // riguardare questa sintassi
   // Get parameters from configuration file
   thePFJetCollectionLabel_ = parameters.getParameter<InputTag>("PFJetCollection");
   theCaloMETCollectionLabel_ = parameters.getParameter<InputTag>("caloMETCollection");
   theTriggerResultsCollection_ = parameters.getParameter<InputTag>("triggerResultsCollection");
 
   theElecTriggerPathToPass_ = parameters.getParameter<std::vector<string> >("elecTriggerPathToPass");
   theMuonTriggerPathToPass_ = parameters.getParameter<std::vector<string> >("muonTriggerPathToPass");
   theTriggerResultsToken_ =
       consumes<edm::TriggerResults>(parameters.getParameter<InputTag>("triggerResultsCollection"));
   theMuonCollectionLabel_ = consumes<reco::MuonCollection>(parameters.getParameter<InputTag>("muonCollection"));
   theElectronCollectionLabel_ =
       consumes<reco::GsfElectronCollection>(parameters.getParameter<InputTag>("electronCollection"));
   thePFJetCollectionToken_ = consumes<edm::View<reco::Jet> >(parameters.getParameter<InputTag>("PFJetCollection"));
   theCaloMETCollectionToken_ = consumes<edm::View<reco::MET> >(parameters.getParameter<InputTag>("caloMETCollection"));
   theVertexToken_ = consumes<reco::VertexCollection>(parameters.getParameter<InputTag>("vertexCollection"));
 
   // just to initialize
   isValidHltConfig_ = false;
 
   h_vertex_number = nullptr;
   h_vertex_chi2 = nullptr;
   h_vertex_numTrks = nullptr;
   h_vertex_sumTrks = nullptr;
   h_vertex_d0 = nullptr;
 
   h_jet_count = nullptr;
   h_jet_et = nullptr;
   h_jet_pt = nullptr;
   h_jet_eta = nullptr;
   h_jet_phi = nullptr;
   h_jet2_et = nullptr;
   // h_jet2_pt = 0;
   h_jet2_eta = nullptr;
   h_jet2_phi = nullptr;
 
   h_e1_et = nullptr;
   h_e2_et = nullptr;
   h_e1_eta = nullptr;
   h_e2_eta = nullptr;
   h_e1_phi = nullptr;
   h_e2_phi = nullptr;
 
   h_m1_pt = nullptr;
   h_m2_pt = nullptr;
   h_m1_eta = nullptr;
   h_m2_eta = nullptr;
   h_m1_phi = nullptr;
   h_m2_phi = nullptr;
 
   // h_t1_et = 0;
   // h_t1_eta = 0;
   // h_t1_phi = 0;
 
   h_met = nullptr;
   h_met_phi = nullptr;
 
   h_e_invWMass = nullptr;
   h_m_invWMass = nullptr;
   h_mumu_invMass = nullptr;
   h_ee_invMass = nullptr;
 }

◆ ~EwkDQM()

EwkDQM::~EwkDQM ( )

override

Destructor.

Definition at line 109 of file EwkDQM.cc.

109 {}

Member Function Documentation

◆ analyze()

void EwkDQM::analyze	(	const edm::Event &	iEvent,
		const edm::EventSetup &	iSetup
	)

overridevirtual

Get the analysis.

Reimplemented from DQMEDAnalyzer.

Definition at line 203 of file EwkDQM.cc.

References edm::HLTGlobalStatus::accept(), calcDeltaPhi(), ewkDQM_cfi::caloMETCollection, funct::cos(), HLT_2022v14_cff::distance, StorageManager_cfg::e1, pdwgLeptonRecoSkim_cfi::electronCollection, mps_fire::i, iEvent, edm::HandleBase::isValid(), dqmiolumiharvest::j, metsig::jet, LogTrace, callgraph::m2, amptDefaultParameters_cff::mu, pdwgLeptonRecoSkim_cfi::muonCollection, Geom::pi(), edm::Handle< T >::product(), edm::HLTGlobalStatus::size(), mathSSE::sqrt(), AlCaHLTBitMon_QueryRunRegistry::string, cscTnPEfficiencyTask_cfi::trigName, trigNames, findQualityFiles::v, and spclusmultinvestigator_cfi::vertexCollection.

                                                                   {
   // short-circuit if hlt problems
   if (!isValidHltConfig_)
     return;
 
   LogTrace(logTraceName) << "Analysis of event # ";
   // Did it pass certain HLT path?
   Handle<TriggerResults> HLTresults;
   iEvent.getByToken(theTriggerResultsToken_, HLTresults);
   if (!HLTresults.isValid())
     return;
 
   const edm::TriggerNames& trigNames = iEvent.triggerNames(*HLTresults);
 
   // a temporary, until we have a list of triggers of interest
   std::vector<std::string> eleTrigPathNames;
   std::vector<std::string> muTrigPathNames;
 
   // eleTrigPathNames.push_back(theElecTriggerPathToPass_);
   // muTrigPathNames.push_back(theMuonTriggerPathToPass_);
   // end of temporary
 
   bool passed_electron_HLT = false;
   bool passed_muon_HLT = false;
   for (unsigned int i = 0; i < HLTresults->size(); i++) {
     const std::string& trigName = trigNames.triggerName(i);
     // check if triggerName matches electronPath
     for (unsigned int index = 0; index < theElecTriggerPathToPass_.size() && !passed_electron_HLT; index++) {
       // 0 if found, pos if not
       size_t trigPath = trigName.find(theElecTriggerPathToPass_[index]);
       if (trigPath == 0) {
         //      cout << "MuonTrigger passed (=trigName): " << trigName <<endl;
         passed_electron_HLT = HLTresults->accept(i);
       }
     }
     // check if triggerName matches muonPath
     for (unsigned int index = 0; index < theMuonTriggerPathToPass_.size() && !passed_muon_HLT; index++) {
       // 0 if found, pos if not
       size_t trigPath = trigName.find(theMuonTriggerPathToPass_[index]);
       if (trigPath == 0) {
         //      cout << "MuonTrigger passed (=trigName): " << trigName <<endl;
         passed_muon_HLT = HLTresults->accept(i);
       }
     }
   }
 
   // we are interested in events with a valid electron or muon
   if (!(passed_electron_HLT || passed_muon_HLT))
     return;
 
   // Vertex information
   Handle<VertexCollection> vertexHandle;
   iEvent.getByToken(theVertexToken_, vertexHandle);
   if (!vertexHandle.isValid())
     return;
   VertexCollection vertexCollection = *(vertexHandle.product());
   VertexCollection::const_iterator v = vertexCollection.begin();
   int vertex_number = vertexCollection.size();
   double vertex_chi2 = v->normalizedChi2();  // v->chi2();
   double vertex_d0 = sqrt(v->x() * v->x() + v->y() * v->y());
   double vertex_numTrks = v->tracksSize();
   double vertex_sumTrks = 0.0;
   // std::cout << "vertex_d0=" << vertex_d0 << "\n";
   // double vertex_ndof    = v->ndof();cout << "ndof="<<vertex_ndof<<endl;
   for (Vertex::trackRef_iterator vertex_curTrack = v->tracks_begin(); vertex_curTrack != v->tracks_end();
        vertex_curTrack++)
     vertex_sumTrks += (*vertex_curTrack)->pt();
 
   // Missing ET
   Handle<View<MET> > caloMETCollection;
   iEvent.getByToken(theCaloMETCollectionToken_, caloMETCollection);
   if (!caloMETCollection.isValid())
     return;
   float missing_et = caloMETCollection->begin()->et();
   float met_phi = caloMETCollection->begin()->phi();
 
   // grab "gaussian sum fitting" electrons
   Handle<GsfElectronCollection> electronCollection;
   iEvent.getByToken(theElectronCollectionLabel_, electronCollection);
   if (!electronCollection.isValid())
     return;
 
   // Find the highest and 2nd highest electron
   float electron_et = -8.0;
   float electron_eta = -8.0;
   float electron_phi = -8.0;
   float electron2_et = -9.0;
   float electron2_eta = -9.0;
   float electron2_phi = -9.0;
   float ee_invMass = -9.0;
   TLorentzVector e1, e2;
 
   // If it passed electron HLT and the collection was found, find electrons near
   // Z mass
   if (passed_electron_HLT) {
     for (reco::GsfElectronCollection::const_iterator recoElectron = electronCollection->begin();
          recoElectron != electronCollection->end();
          recoElectron++) {
       // Require electron to pass some basic cuts
       if (recoElectron->et() < 20 || fabs(recoElectron->eta()) > 2.5)
         continue;
 
       // Tighter electron cuts
       if (recoElectron->deltaPhiSuperClusterTrackAtVtx() > 0.58 ||
           recoElectron->deltaEtaSuperClusterTrackAtVtx() > 0.01 || recoElectron->sigmaIetaIeta() > 0.027)
         continue;
 
       if (recoElectron->et() > electron_et) {
         electron2_et = electron_et;  // 2nd highest gets values from current highest
         electron2_eta = electron_eta;
         electron2_phi = electron_phi;
         electron_et = recoElectron->et();  // 1st highest gets values from new highest
         electron_eta = recoElectron->eta();
         electron_phi = recoElectron->phi();
         e1 = TLorentzVector(recoElectron->momentum().x(),
                             recoElectron->momentum().y(),
                             recoElectron->momentum().z(),
                             recoElectron->p());
       } else if (recoElectron->et() > electron2_et) {
         electron2_et = recoElectron->et();
         electron2_eta = recoElectron->eta();
         electron2_phi = recoElectron->phi();
         e2 = TLorentzVector(recoElectron->momentum().x(),
                             recoElectron->momentum().y(),
                             recoElectron->momentum().z(),
                             recoElectron->p());
       }
     }  // end of loop over electrons
     if (electron2_et > 0.0) {
       TLorentzVector pair = e1 + e2;
       ee_invMass = pair.M();
     }
   }  // end of "are electrons valid"
 
   // Take the STA muon container
   Handle<MuonCollection> muonCollection;
   iEvent.getByToken(theMuonCollectionLabel_, muonCollection);
   if (!muonCollection.isValid())
     return;
 
   // Find the highest pt muons
   float mm_invMass = -9.0;
   float muon_pt = -9.0;
   float muon_eta = -9.0;
   float muon_phi = -9.0;
   float muon2_pt = -9.0;
   float muon2_eta = -9.0;
   float muon2_phi = -9.0;
   TLorentzVector m1, m2;
 
   if (passed_muon_HLT) {
     for (reco::MuonCollection::const_iterator recoMuon = muonCollection->begin(); recoMuon != muonCollection->end();
          recoMuon++) {
       // Require muon to pass some basic cuts
       if (recoMuon->pt() < 20 || !recoMuon->isGlobalMuon())
         continue;
       // Some tighter muon cuts
       if (recoMuon->globalTrack()->normalizedChi2() > 10)
         continue;
 
       if (recoMuon->pt() > muon_pt) {
         muon2_pt = muon_pt;  // 2nd highest gets values from current highest
         muon2_eta = muon_eta;
         muon2_phi = muon_phi;
         muon_pt = recoMuon->pt();  // 1st highest gets values from new highest
         muon_eta = recoMuon->eta();
         muon_phi = recoMuon->phi();
         m1 =
             TLorentzVector(recoMuon->momentum().x(), recoMuon->momentum().y(), recoMuon->momentum().z(), recoMuon->p());
       } else if (recoMuon->pt() > muon2_pt) {
         muon2_pt = recoMuon->pt();
         muon2_eta = recoMuon->eta();
         muon2_phi = recoMuon->phi();
         m2 =
             TLorentzVector(recoMuon->momentum().x(), recoMuon->momentum().y(), recoMuon->momentum().z(), recoMuon->p());
       }
     }
   }
   if (muon2_pt > 0.0) {
     TLorentzVector pair = m1 + m2;
     mm_invMass = pair.M();
   }
 
   // Find the highest et jet
 
   //  Handle<CaloJetCollection> caloJetCollection;
   Handle<View<Jet> > PFJetCollection;
   iEvent.getByToken(thePFJetCollectionToken_, PFJetCollection);
   if (!PFJetCollection.isValid())
     return;
 
   unsigned int muonCollectionSize = muonCollection->size();
   // unsigned int jetCollectionSize = jetCollection->size();
   unsigned int PFJetCollectionSize = PFJetCollection->size();
   int jet_count = 0;
   // int LEADJET=-1;  double max_pt=0;
 
   float jet_et = -80.0;
   float jet_pt = -80.0;   // prova
   float jet_eta = -80.0;  // now USED
   float jet_phi = -80.0;  // now USED
   float jet2_et = -90.0;
   float jet2_eta = -90.0;  // now USED
   float jet2_phi = -90.0;  // now USED
   //  for (CaloJetCollection::const_iterator i_calojet =
   // caloJetCollection->begin();
   //       i_calojet != caloJetCollection->end(); i_calojet++) {
   //  for (PFJetCollection::const_iterator i_pfjet = PFJetCollection->begin();
   //       i_pfjet != PFJetCollection->end(); i_pfjet++) {
   //  float jet_current_et = i_calojet->et();
   //  float jet_current_et = i_pfjet->et();            // e` identico a jet.et()
   //    jet_count++;
 
   // cleaning: va messo prima del riempimento dell'istogramma // This is in
   // order to use PFJets
   for (unsigned int i = 0; i < PFJetCollectionSize; i++) {
     const Jet& jet = PFJetCollection->at(i);
     // la classe "jet" viene definita qui!!!
     double minDistance = 99999;
     for (unsigned int j = 0; j < muonCollectionSize; j++) {
       const Muon& mu = muonCollection->at(j);
       double distance =
           sqrt((mu.eta() - jet.eta()) * (mu.eta() - jet.eta()) + (mu.phi() - jet.phi()) * (mu.phi() - jet.phi()));
       if (minDistance > distance)
         minDistance = distance;
     }
     if (minDistance < 0.3)
       continue;  // 0.3 is the isolation cone around the muon
     // se la distanza muone-cono del jet e` minore di 0.3, passo avanti e non
     // conteggio il mio jet
 
     // If it overlaps with ELECTRON, it is not a jet
     if (electron_et > 0.0 && fabs(jet.eta() - electron_eta) < 0.2 && calcDeltaPhi(jet.phi(), electron_phi) < 0.2)
       continue;
     if (electron2_et > 0.0 && fabs(jet.eta() - electron2_eta) < 0.2 && calcDeltaPhi(jet.phi(), electron2_phi) < 0.2)
       continue;
 
     // provo a cambiare la parte degli elettroni in modo simmetrico alla parte
     // per i muoni
 
     // ...
     // ...
 
     // if it has too low Et, throw away
     if (jet.et() < eJetMin_)
       continue;
     jet_count++;
 
     // ovvero: incrementa jet_count se:
     //   - non c'e un muone entro 0.3 di distanza dal cono del jet;
     //   - se il jet non si sovrappone ad un elettrone;
     //   - se l'energia trasversa e` maggiore della soglia impostata (15?)
 
     // if(jet.et()>max_pt) { LEADJET=i; max_pt=jet.et();}
     // se l'energia del jet e` maggiore di max_pt, diventa "i"
     // l'indice del jet piu` energetico e max_pt la sua energia
 
     // riguardare questo!!!
     // fino ad ora, jet_et era inizializzato a -8.0
     if (jet.et() > jet_et) {
       jet2_et = jet_et;  // 2nd highest jet gets et from current highest
       // perche` prende l'energia del primo jet??
       jet2_eta = jet_eta;  // now USED
       jet2_phi = jet_phi;  // now USED
       // jet_et = i_calojet->et(); // current highest jet gets
       // et from the new highest
       jet_et = jet.et();  // current highest jet gets et from the new highest
       // ah, ok! lo riaggiorna solo dopo!
       jet_pt = jet.pt();                          // e` il pT del leading jet
       jet_eta = jet.eta();                        // now USED
       jet_phi = jet.phi() * (Geom::pi() / 180.);  // now USED
     } else if (jet.et() > jet2_et) {
       //      jet2_et  = i_calojet->et();
       jet2_et = jet.et();
       //      jet2_eta = i_calojet->eta();  // UNUSED
       //      jet2_phi = i_calojet->phi();  // UNUSED
       jet2_eta = jet.eta();  // now USED
       jet2_phi = jet.phi();  // now USED
     }
     // questo elseif funziona
   }
 
   //                 Fill Histograms //
 
   bool fill_e1 = false;
   bool fill_e2 = false;
   bool fill_m1 = false;
   bool fill_m2 = false;
   bool fill_met = false;
 
   // Was Z->ee found?
   if (ee_invMass > 0.0) {
     h_ee_invMass->Fill(ee_invMass);
     fill_e1 = true;
     fill_e2 = true;
   }
 
   // Was Z->mu mu found?
   if (mm_invMass > 0.0) {
     h_mumu_invMass->Fill(mm_invMass);
     fill_m1 = true;
     fill_m2 = true;
     h_jet2_et->Fill(jet2_et);
   }
 
   // Was W->e nu found?
   if (electron_et > 0.0 && missing_et > 20.0) {
     float dphiW = fabs(met_phi - electron_phi);
     float W_mt_e = sqrt(2 * missing_et * electron_et * (1 - cos(dphiW)));
     h_e_invWMass->Fill(W_mt_e);
     fill_e1 = true;
     fill_met = true;
   }
 
   // Was W->mu nu found?
   if (muon_pt > 0.0 && missing_et > 20.0) {
     float dphiW = fabs(met_phi - muon_phi);
     float W_mt_m = sqrt(2 * missing_et * muon_pt * (1 - cos(dphiW)));
     h_m_invWMass->Fill(W_mt_m);
     fill_m1 = true;
     fill_met = true;
   }
 
   if (jet_et > -10.0) {
     h_jet_et->Fill(jet_et);
     h_jet_count->Fill(jet_count);
   }
 
   if (jet_pt > 0.) {
     h_jet_pt->Fill(jet_pt);
   }
 
   if (jet_eta > -50.) {
     h_jet_eta->Fill(jet_eta);
   }
 
   if (jet_phi > -10.) {
     h_jet_phi->Fill(jet_phi);
   }
 
   if (jet2_et > -10.0) {
     h_jet2_et->Fill(jet2_et);
   }
 
   // if (jet2_pt>0.) {
   //  h_jet2_pt   ->Fill(jet2_pt);
   // }
 
   if (jet2_eta > -50.) {
     h_jet2_eta->Fill(jet2_eta);
   }
 
   if (jet2_phi > -10.) {
     h_jet2_phi->Fill(jet2_phi);
   }
 
   if (fill_e1 || fill_m1) {
     h_vertex_number->Fill(vertex_number);
     h_vertex_chi2->Fill(vertex_chi2);
     h_vertex_d0->Fill(vertex_d0);
     h_vertex_numTrks->Fill(vertex_numTrks);
     h_vertex_sumTrks->Fill(vertex_sumTrks);
   }
 
   if (fill_e1) {
     h_e1_et->Fill(electron_et);
     h_e1_eta->Fill(electron_eta);
     h_e1_phi->Fill(electron_phi);
   }
   if (fill_e2) {
     h_e2_et->Fill(electron2_et);
     h_e2_eta->Fill(electron2_eta);
     h_e2_phi->Fill(electron2_phi);
   }
   if (fill_m1) {
     h_m1_pt->Fill(muon_pt);
     h_m1_eta->Fill(muon_eta);
     h_m1_phi->Fill(muon_phi);
   }
   if (fill_m2) {
     h_m2_pt->Fill(muon2_pt);
     h_m2_eta->Fill(muon2_eta);
     h_m2_phi->Fill(muon2_phi);
   }
   if (fill_met) {
     h_met->Fill(missing_et);
     h_met_phi->Fill(met_phi);
   }
 }

◆ bookHistograms()

void EwkDQM::bookHistograms	(	DQMStore::IBooker &	ibooker,
		edm::Run const &	,
		edm::EventSetup const &
	)

overridevirtual

Implements DQMEDAnalyzer.

Definition at line 111 of file EwkDQM.cc.

References dqm::implementation::IBooker::book1D(), LogTrace, pi, and dqm::implementation::NavigatorBase::setCurrentFolder().

                                                                                          {
   ibooker.setCurrentFolder("Physics/EwkDQM");
 
   char chtitle[256] = "";
   const size_t title_s = sizeof(chtitle);
 
   logTraceName = "EwkAnalyzer";
 
   LogTrace(logTraceName) << "Parameters initialization";
 
   const float pi = 4 * atan(1);
 
   // Keep the number of plots and number of bins to a minimum!
 
   h_vertex_number = ibooker.book1D("vertex_number", "Number of event vertices in collection", 10, -0.5, 9.5);
   h_vertex_chi2 = ibooker.book1D("vertex_chi2", "Event Vertex #chi^{2}/n.d.o.f.", 20, 0.0, 2.0);
   h_vertex_numTrks = ibooker.book1D("vertex_numTrks", "Event Vertex, number of tracks", 20, -0.5, 59.5);
   h_vertex_sumTrks = ibooker.book1D("vertex_sumTrks", "Event Vertex, sum of track pt", 20, 0.0, 100.0);
   h_vertex_d0 = ibooker.book1D("vertex_d0", "Event Vertex d0", 20, 0.0, 0.05);
 
   h_jet_count = ibooker.book1D("jet_count", chtitle, 8, -0.5, 7.5);
 
   snprintf(
       chtitle, title_s, "Leading jet E_{T} (from %s);E_{T}(1^{st} jet) (GeV)", thePFJetCollectionLabel_.label().data());
   h_jet_et = ibooker.book1D("jet_et", chtitle, 20, 0., 200.0);
 
   snprintf(chtitle,
            title_s,
            "Leading jet p_{T} (from %s);p_{T}(1^{st} jet) (GeV/c)",
            thePFJetCollectionLabel_.label().data());
   h_jet_pt = ibooker.book1D("jet_pt", chtitle, 20, 0., 200.0);
 
   snprintf(chtitle, title_s, "Leading jet #eta (from %s); #eta (1^{st} jet)", thePFJetCollectionLabel_.label().data());
   h_jet_eta = ibooker.book1D("jet_eta", chtitle, 20, -10., 10.0);
 
   snprintf(chtitle, title_s, "Leading jet #phi (from %s); #phi(1^{st} jet)", thePFJetCollectionLabel_.label().data());
   h_jet_phi = ibooker.book1D("jet_phi", chtitle, 22, -1.1 * pi, 1.1 * pi);
 
   snprintf(chtitle,
            title_s,
            "2^{nd} leading jet E_{T} (from %s);E_{T}(2^{nd} jet) (GeV)",
            thePFJetCollectionLabel_.label().data());
   h_jet2_et = ibooker.book1D("jet2_et", chtitle, 20, 0., 200.0);
 
   snprintf(chtitle,
            title_s,
            "2^{nd} leading jet #eta (from %s); #eta (2^{nd} jet)",
            thePFJetCollectionLabel_.label().data());
   h_jet2_eta = ibooker.book1D("jet2_eta", chtitle, 20, -10., 10.0);
 
   snprintf(
       chtitle, title_s, "2^{nd} leading jet #phi (from %s); #phi(2^{nd} jet)", thePFJetCollectionLabel_.label().data());
   h_jet2_phi = ibooker.book1D("jet2_phi", chtitle, 22, -1.1 * pi, 1.1 * pi);
 
   h_e1_et = ibooker.book1D("e1_et", "E_{T} of Leading Electron;E_{T} (GeV)", 20, 0.0, 100.0);
   h_e2_et = ibooker.book1D("e2_et", "E_{T} of Second Electron;E_{T} (GeV)", 20, 0.0, 100.0);
   h_e1_eta = ibooker.book1D("e1_eta", "#eta of Leading Electron;#eta", 20, -4.0, 4.0);
 
   h_e2_eta = ibooker.book1D("e2_eta", "#eta of Second Electron;#eta", 20, -4.0, 4.0);
 
   h_e1_phi = ibooker.book1D("e1_phi", "#phi of Leading Electron;#phi", 22, -1.1 * pi, 1.1 * pi);
   h_e2_phi = ibooker.book1D("e2_phi", "#phi of Second Electron;#phi", 22, -1.1 * pi, 1.1 * pi);
   h_m1_pt = ibooker.book1D("m1_pt", "p_{T} of Leading Muon;p_{T}(1^{st} #mu) (GeV)", 20, 0.0, 100.0);
   h_m2_pt = ibooker.book1D("m2_pt", "p_{T} of Second Muon;p_{T}(2^{nd} #mu) (GeV)", 20, 0.0, 100.0);
   h_m1_eta = ibooker.book1D("m1_eta", "#eta of Leading Muon;#eta(1^{st} #mu)", 20, -4.0, 4.0);
   h_m2_eta = ibooker.book1D("m2_eta", "#eta of Second Muon;#eta(2^{nd} #mu)", 20, -4.0, 4.0);
   h_m1_phi = ibooker.book1D(
       "m1_phi", "#phi of Leading Muon;#phi(1^{st} #mu)", 20, (-1. - 1. / 10.) * pi, (1. + 1. / 10.) * pi);
   h_m2_phi =
       ibooker.book1D("m2_phi", "#phi of Second Muon;#phi(2^{nd} #mu)", 20, (-1. - 1. / 10.) * pi, (1. + 1. / 10.) * pi);
 
   snprintf(chtitle, title_s, "Missing E_{T} (%s); GeV", theCaloMETCollectionLabel_.label().data());
   h_met = ibooker.book1D("met", chtitle, 20, 0.0, 100);
   h_met_phi =
       ibooker.book1D("met_phi", "Missing E_{T} #phi;#phi(MET)", 22, (-1. - 1. / 10.) * pi, (1. + 1. / 10.) * pi);
 
   h_e_invWMass = ibooker.book1D("we_invWMass", "W-> e #nu Transverse Mass;M_{T} (GeV)", 20, 0.0, 140.0);
   h_m_invWMass = ibooker.book1D("wm_invWMass", "W-> #mu #nu Transverse Mass;M_{T} (GeV)", 20, 0.0, 140.0);
   h_mumu_invMass = ibooker.book1D("z_mm_invMass", "#mu#mu Invariant Mass;InvMass (GeV)", 20, 40.0, 140.0);
   h_ee_invMass = ibooker.book1D("z_ee_invMass", "ee Invariant Mass;InvMass (Gev)", 20, 40.0, 140.0);
 }

◆ calcDeltaPhi()

double EwkDQM::calcDeltaPhi	(	double	phi1,
		double	phi2
	)

Definition at line 605 of file EwkDQM.cc.

References SiPixelRawToDigiRegional_cfi::deltaPhi.

                                                     {
   double deltaPhi = phi1 - phi2;
 
   if (deltaPhi < 0)
     deltaPhi = -deltaPhi;
 
   if (deltaPhi > 3.1415926)
     deltaPhi = 2 * 3.1415926 - deltaPhi;
 
   return deltaPhi;
 }

◆ dqmBeginRun()

void EwkDQM::dqmBeginRun	(	const edm::Run &	theRun,
		const edm::EventSetup &	theSetup
	)

overridevirtual

Reimplemented from DQMEDAnalyzer.

Definition at line 194 of file EwkDQM.cc.

References HigPhotonJetHLTOfflineSource_cfi::hltProcessName, and AlCaHLTBitMon_QueryRunRegistry::string.

                                                                             {
   // passed as parameter to HLTConfigProvider::init(), not yet used
   bool isConfigChanged = false;
 
   // isValidHltConfig_ used to short-circuit analyze() in case of problems
   const std::string hltProcessName(theTriggerResultsCollection_.process());
   isValidHltConfig_ = hltConfigProvider_.init(theRun, theSetup, hltProcessName, isConfigChanged);
 }

Member Data Documentation

◆ eJetMin_

double EwkDQM::eJetMin_

private

Definition at line 69 of file EwkDQM.h.

◆ h_e1_et

MonitorElement* EwkDQM::h_e1_et

private

Definition at line 89 of file EwkDQM.h.

◆ h_e1_eta

MonitorElement* EwkDQM::h_e1_eta

private

Definition at line 91 of file EwkDQM.h.

◆ h_e1_phi

MonitorElement* EwkDQM::h_e1_phi

private

Definition at line 93 of file EwkDQM.h.

◆ h_e2_et

MonitorElement* EwkDQM::h_e2_et

private

Definition at line 90 of file EwkDQM.h.

◆ h_e2_eta

MonitorElement* EwkDQM::h_e2_eta

private

Definition at line 92 of file EwkDQM.h.

◆ h_e2_phi

MonitorElement* EwkDQM::h_e2_phi

private

Definition at line 94 of file EwkDQM.h.

◆ h_e_invWMass

MonitorElement* EwkDQM::h_e_invWMass

private

Definition at line 110 of file EwkDQM.h.

◆ h_ee_invMass

MonitorElement* EwkDQM::h_ee_invMass

private

Definition at line 113 of file EwkDQM.h.

◆ h_jet2_et

MonitorElement* EwkDQM::h_jet2_et

private

Definition at line 84 of file EwkDQM.h.

◆ h_jet2_eta

MonitorElement* EwkDQM::h_jet2_eta

private

Definition at line 86 of file EwkDQM.h.

◆ h_jet2_phi

MonitorElement* EwkDQM::h_jet2_phi

private

Definition at line 87 of file EwkDQM.h.

◆ h_jet_count

MonitorElement* EwkDQM::h_jet_count

private

Definition at line 78 of file EwkDQM.h.

◆ h_jet_et

MonitorElement* EwkDQM::h_jet_et

private

Definition at line 79 of file EwkDQM.h.

◆ h_jet_eta

MonitorElement* EwkDQM::h_jet_eta

private

Definition at line 81 of file EwkDQM.h.

◆ h_jet_phi

MonitorElement* EwkDQM::h_jet_phi

private

Definition at line 82 of file EwkDQM.h.

◆ h_jet_pt

MonitorElement* EwkDQM::h_jet_pt

private

Definition at line 80 of file EwkDQM.h.

◆ h_m1_eta

MonitorElement* EwkDQM::h_m1_eta

private

Definition at line 98 of file EwkDQM.h.

◆ h_m1_phi

MonitorElement* EwkDQM::h_m1_phi

private

Definition at line 100 of file EwkDQM.h.

◆ h_m1_pt

MonitorElement* EwkDQM::h_m1_pt

private

Definition at line 96 of file EwkDQM.h.

◆ h_m2_eta

MonitorElement* EwkDQM::h_m2_eta

private

Definition at line 99 of file EwkDQM.h.

◆ h_m2_phi

MonitorElement* EwkDQM::h_m2_phi

private

Definition at line 101 of file EwkDQM.h.

◆ h_m2_pt

MonitorElement* EwkDQM::h_m2_pt

private

Definition at line 97 of file EwkDQM.h.

◆ h_m_invWMass

MonitorElement* EwkDQM::h_m_invWMass

private

Definition at line 111 of file EwkDQM.h.

◆ h_met

MonitorElement* EwkDQM::h_met

private

Definition at line 107 of file EwkDQM.h.

◆ h_met_phi

MonitorElement* EwkDQM::h_met_phi

private

Definition at line 108 of file EwkDQM.h.

◆ h_mumu_invMass

MonitorElement* EwkDQM::h_mumu_invMass

private

Definition at line 112 of file EwkDQM.h.

◆ h_vertex_chi2

MonitorElement* EwkDQM::h_vertex_chi2

private

Definition at line 73 of file EwkDQM.h.

◆ h_vertex_d0

MonitorElement* EwkDQM::h_vertex_d0

private

Definition at line 76 of file EwkDQM.h.

◆ h_vertex_number

MonitorElement* EwkDQM::h_vertex_number

private

Definition at line 72 of file EwkDQM.h.

◆ h_vertex_numTrks

MonitorElement* EwkDQM::h_vertex_numTrks

private

Definition at line 74 of file EwkDQM.h.

◆ h_vertex_sumTrks

MonitorElement* EwkDQM::h_vertex_sumTrks

private

Definition at line 75 of file EwkDQM.h.

◆ hltConfigProvider_

HLTConfigProvider EwkDQM::hltConfigProvider_

private

Definition at line 53 of file EwkDQM.h.

◆ isValidHltConfig_

bool EwkDQM::isValidHltConfig_

private

Definition at line 54 of file EwkDQM.h.

◆ logTraceName

std::string EwkDQM::logTraceName

private

Definition at line 51 of file EwkDQM.h.

◆ theCaloMETCollectionLabel_

edm::InputTag EwkDQM::theCaloMETCollectionLabel_

private

Definition at line 60 of file EwkDQM.h.

◆ theCaloMETCollectionToken_

edm::EDGetTokenT<edm::View<reco::MET> > EwkDQM::theCaloMETCollectionToken_

private

Definition at line 66 of file EwkDQM.h.

◆ theElecTriggerPathToPass_

std::vector<std::string> EwkDQM::theElecTriggerPathToPass_

private

Definition at line 57 of file EwkDQM.h.

◆ theElectronCollectionLabel_

edm::EDGetTokenT<reco::GsfElectronCollection> EwkDQM::theElectronCollectionLabel_

private

Definition at line 64 of file EwkDQM.h.

◆ theMuonCollectionLabel_

edm::EDGetTokenT<reco::MuonCollection> EwkDQM::theMuonCollectionLabel_

private

Definition at line 63 of file EwkDQM.h.

◆ theMuonTriggerPathToPass_

std::vector<std::string> EwkDQM::theMuonTriggerPathToPass_

private

Definition at line 58 of file EwkDQM.h.

◆ thePFJetCollectionLabel_

edm::InputTag EwkDQM::thePFJetCollectionLabel_

private

Definition at line 59 of file EwkDQM.h.

◆ thePFJetCollectionToken_

edm::EDGetTokenT<edm::View<reco::Jet> > EwkDQM::thePFJetCollectionToken_

private

Definition at line 65 of file EwkDQM.h.

◆ theTriggerResultsCollection_

edm::InputTag EwkDQM::theTriggerResultsCollection_

private

Definition at line 61 of file EwkDQM.h.

◆ theTriggerResultsToken_

edm::EDGetTokenT<edm::TriggerResults> EwkDQM::theTriggerResultsToken_

private

Definition at line 62 of file EwkDQM.h.

◆ theVertexToken_

edm::EDGetTokenT<reco::VertexCollection> EwkDQM::theVertexToken_

private

Definition at line 67 of file EwkDQM.h.

Public Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ EwkDQM()

◆ ~EwkDQM()

Member Function Documentation

◆ analyze()

◆ bookHistograms()

◆ calcDeltaPhi()

◆ dqmBeginRun()

Member Data Documentation

◆ eJetMin_

◆ h_e1_et

◆ h_e1_eta

◆ h_e1_phi

◆ h_e2_et

◆ h_e2_eta

◆ h_e2_phi

◆ h_e_invWMass

◆ h_ee_invMass

◆ h_jet2_et

◆ h_jet2_eta

◆ h_jet2_phi

◆ h_jet_count

◆ h_jet_et

◆ h_jet_eta

◆ h_jet_phi

◆ h_jet_pt

◆ h_m1_eta

◆ h_m1_phi

◆ h_m1_pt

◆ h_m2_eta

◆ h_m2_phi

◆ h_m2_pt

◆ h_m_invWMass

◆ h_met

◆ h_met_phi

◆ h_mumu_invMass

◆ h_vertex_chi2

◆ h_vertex_d0

◆ h_vertex_number

◆ h_vertex_numTrks

◆ h_vertex_sumTrks

◆ hltConfigProvider_

◆ isValidHltConfig_

◆ logTraceName

◆ theCaloMETCollectionLabel_

◆ theCaloMETCollectionToken_

◆ theElecTriggerPathToPass_

◆ theElectronCollectionLabel_

◆ theMuonCollectionLabel_

◆ theMuonTriggerPathToPass_

◆ thePFJetCollectionLabel_

◆ thePFJetCollectionToken_

◆ theTriggerResultsCollection_

◆ theTriggerResultsToken_

◆ theVertexToken_