RBCProcessRPCSimDigis.cc

Go to the documentation of this file.

// Include files

// local
#include "L1Trigger/RPCTechnicalTrigger/interface/RBCProcessRPCSimDigis.h"
#include "L1Trigger/RPCTechnicalTrigger/interface/RBCLinkBoardGLSignal.h"
#include "DataFormats/Common/interface/Handle.h"
#include "GeometryConstants.h"

//-----------------------------------------------------------------------------
// Implementation file for class : RBCProcessRPCSimDigis
//
// 2009-09-20 : Andres Felipe Osorio Oliveros
//-----------------------------------------------------------------------------
using namespace rpctechnicaltrigger;

RBCProcessRPCSimDigis::RBCProcessRPCSimDigis(const edm::ESHandle<RPCGeometry>& rpcGeom,
                                             const edm::Handle<edm::DetSetVector<RPCDigiSimLink> >& digiSimLink) {
  m_ptr_rpcGeom = &rpcGeom;
  m_ptr_digiSimLink = &digiSimLink;

  m_lbin = std::make_unique<RBCLinkBoardGLSignal>(&m_data);

  m_debug = false;
  m_maxBxWindow = 3;
}

//=============================================================================
// Destructor
//=============================================================================
RBCProcessRPCSimDigis::~RBCProcessRPCSimDigis() { reset(); }

//=============================================================================
int RBCProcessRPCSimDigis::next() {
  //...clean up previous data contents

  reset();

  int ndigis(0);

  for (m_linkItr = (*m_ptr_digiSimLink)->begin(); m_linkItr != (*m_ptr_digiSimLink)->end(); ++m_linkItr) {
    for (m_digiItr = m_linkItr->data.begin(); m_digiItr != m_linkItr->data.end(); ++m_digiItr) {
      if (m_debug)
        std::cout << "looping over digis 1 ..." << std::endl;

      int bx = (*m_digiItr).getBx();

      if (abs(bx) >= m_maxBxWindow) {
        if (m_debug)
          std::cout << "RBCProcessRPCSimDigis> found a bx bigger than max allowed: " << bx << std::endl;
        continue;
      }

      uint32_t detid = m_digiItr->getDetUnitId();
      const RPCDetId id(detid);
      const RPCRoll* roll = dynamic_cast<const RPCRoll*>((*m_ptr_rpcGeom)->roll(id));

      if ((roll->isForward())) {
        if (m_debug)
          std::cout << "RBCProcessRPCSimDigis: roll is forward" << std::endl;
        continue;
      }

      int wheel = roll->id().ring();                // -2,-1,0,+1,+2
      int sector = roll->id().sector();             // 1 to 12
      int layer = roll->id().layer();               // 1,2
      int station = roll->id().station();           // 1-4
      int blayer = getBarrelLayer(layer, station);  // 1 to 6
      int rollid = id.roll();

      int digipos = (station * 100) + (layer * 10) + rollid;

      if ((wheel == -1 || wheel == 0 || wheel == 1) && station == 2 && layer == 1)
        digipos = 30000 + digipos;
      if ((wheel == -2 || wheel == 2) && station == 2 && layer == 2)
        digipos = 30000 + digipos;

      if ((wheel == -1 || wheel == 0 || wheel == 1) && station == 2 && layer == 2)
        digipos = 20000 + digipos;
      if ((wheel == -2 || wheel == 2) && station == 2 && layer == 1)
        digipos = 20000 + digipos;

      if (m_debug)
        std::cout << "Bx: " << bx << '\t' << "Wheel: " << wheel << '\t' << "Sector: " << sector << '\t'
                  << "Station: " << station << '\t' << "Layer: " << layer << '\t' << "B-Layer: " << blayer << '\t'
                  << "Roll id: " << rollid << '\t' << "Digi at: " << digipos << '\n';

      //... Construct the RBCinput objects
      auto itr = m_vecDataperBx.find(bx);

      if (itr == m_vecDataperBx.end()) {
        if (m_debug)
          std::cout << "Found a new Bx: " << bx << std::endl;
        auto& wheelData = m_vecDataperBx[bx];
        initialize(wheelData);
        auto& block = wheelData[(wheel + 2)];
        setDigiAt(sector, digipos, block);
      } else {
        auto& block = (*itr).second[(wheel + 2)];
        setDigiAt(sector, digipos, block);
      }

      if (m_debug)
        std::cout << "looping over digis 2 ..." << std::endl;

      ++ndigis;
    }
  }

  if (m_debug)
    std::cout << "size of data vectors: " << m_vecDataperBx.size() << std::endl;

  builddata();

  if (m_debug) {
    std::cout << "after reset" << std::endl;
    print_output();
  }

  if (m_debug)
    std::cout << "RBCProcessRPCSimDigis: DataSize: " << m_data.size() << " ndigis " << ndigis << std::endl;

  if (m_data.empty())
    return 0;

  return 1;
}

void RBCProcessRPCSimDigis::reset() { m_vecDataperBx.clear(); }

void RBCProcessRPCSimDigis::initialize(std::vector<RPCData>& dataVec) {
  if (m_debug)
    std::cout << "initialize" << std::endl;

  constexpr int maxWheels = 5;
  constexpr int maxRbcBrds = 6;

  dataVec.reserve(maxWheels);
  for (int i = 0; i < maxWheels; ++i) {
    auto& block = dataVec.emplace_back();

    block.m_wheel = s_wheelid[i];

    for (int j = 0; j < maxRbcBrds; ++j) {
      block.m_sec1[j] = s_sec1id[j];
      block.m_sec2[j] = s_sec2id[j];
      block.m_orsignals[j].input_sec[0].reset();
      block.m_orsignals[j].input_sec[1].reset();
      block.m_orsignals[j].needmapping = false;
      block.m_orsignals[j].hasData = false;
    }
  }

  if (m_debug)
    std::cout << "initialize: completed" << std::endl;
}

void RBCProcessRPCSimDigis::builddata() {
  int code(0);

  for (auto& dataPerBx : m_vecDataperBx) {
    int bx = dataPerBx.first;

    int bxsign;
    if (bx != 0)
      bxsign = (bx / abs(bx));
    else
      bxsign = 1;

    for (auto& item : dataPerBx.second) {
      for (int k = 0; k < 6; ++k) {
        code = bxsign * (1000000 * abs(bx) + 10000 * item.wheelIdx() + 100 * item.m_sec1[k] + 1 * item.m_sec2[k]);

        RBCInput* signal = &item.m_orsignals[k];
        signal->needmapping = false;

        if (signal->hasData)
          m_data.insert(std::make_pair(code, signal));
      }
    }
  }

  if (m_debug and not m_vecDataperBx.empty())
    std::cout << "builddata: completed. size of data: " << m_data.size() << std::endl;
}

int RBCProcessRPCSimDigis::getBarrelLayer(const int& _layer, const int& _station) {
  //... Calculates the generic Barrel Layer (1 to 6)
  int blayer(0);

  if (_station < 3) {
    blayer = ((_station - 1) * 2) + _layer;
  } else {
    blayer = _station + 2;
  }

  return blayer;
}

void RBCProcessRPCSimDigis::setDigiAt(int sector, int digipos, RPCData& block) {
  int pos = 0;
  int isAoB = 0;

  if (m_debug)
    std::cout << "setDigiAt" << std::endl;

  auto itr = std::find(s_sec1id.begin(), s_sec1id.end(), sector);

  if (itr == s_sec1id.end()) {
    itr = std::find(s_sec2id.begin(), s_sec2id.end(), sector);
    isAoB = 1;
  }

  for (pos = 0; pos < 6; ++pos) {
    if (block.m_sec1[pos] == sector || block.m_sec2[pos] == sector)
      break;
  }

  if (m_debug)
    std::cout << block.m_orsignals[pos];

  setInputBit(block.m_orsignals[pos].input_sec[isAoB], digipos);

  block.m_orsignals[pos].hasData = true;

  if (m_debug)
    std::cout << block.m_orsignals[pos];

  if (m_debug)
    std::cout << "setDigiAt completed" << std::endl;
}

void RBCProcessRPCSimDigis::setInputBit(std::bitset<15>& signals, int digipos) {
  int bitpos = s_layermap.at(digipos);
  if (m_debug)
    std::cout << "Bitpos: " << bitpos << std::endl;
  signals.set(bitpos, true);
}

void RBCProcessRPCSimDigis::print_output() {
  std::cout << "RBCProcessRPCSimDigis> Output starts" << std::endl;

  std::map<int, RBCInput*>::const_iterator itr;
  for (itr = m_data.begin(); itr != m_data.end(); ++itr) {
    std::cout << (*itr).first << '\t' << (*(*itr).second) << '\n';
  }

  std::cout << "RBCProcessRPCSimDigis> Output ends" << std::endl;
}