CSCMake2DRecHit.cc

Go to the documentation of this file.

// This is CSCMake2DRecHit

#include <RecoLocalMuon/CSCRecHitD/src/CSCMake2DRecHit.h>
#include <RecoLocalMuon/CSCRecHitD/src/CSCXonStrip_MatchGatti.h>
#include <RecoLocalMuon/CSCRecHitD/src/CSCStripHit.h>
#include <RecoLocalMuon/CSCRecHitD/src/CSCWireHit.h>
#include <RecoLocalMuon/CSCRecHitD/src/CSCRecoConditions.h>

#include <DataFormats/CSCRecHit/interface/CSCRecHit2D.h>
#include <DataFormats/MuonDetId/interface/CSCDetId.h>

#include <Geometry/CSCGeometry/interface/CSCLayer.h>
#include <Geometry/CSCGeometry/interface/CSCChamberSpecs.h>
#include <Geometry/CSCGeometry/interface/CSCLayerGeometry.h>

#include <FWCore/MessageLogger/interface/MessageLogger.h>
#include <FWCore/Utilities/interface/Exception.h>

#include <iostream>
#include <algorithm>
#include <cmath>
#include <string>

CSCMake2DRecHit::CSCMake2DRecHit(const edm::ParameterSet& ps) : peakTimeFinder_(new CSCFindPeakTime(ps)) {
  useCalib = ps.getParameter<bool>("CSCUseCalibrations");
  stripWireDeltaTime = ps.getParameter<int>("CSCstripWireDeltaTime");  //@@ Non-standard  CSC*s*trip...
  useTimingCorrections = ps.getParameter<bool>("CSCUseTimingCorrections");
  useGasGainCorrections = ps.getParameter<bool>("CSCUseGasGainCorrections");

  xMatchGatti_ = new CSCXonStrip_MatchGatti(ps);
}

CSCMake2DRecHit::~CSCMake2DRecHit() { delete xMatchGatti_; }

CSCRecHit2D CSCMake2DRecHit::hitFromStripAndWire(const CSCDetId& id,
                                                 const CSCLayer* layer,
                                                 const CSCWireHit& wHit,
                                                 const CSCStripHit& sHit) {
  // Cache layer info for ease of access
  layer_ = layer;
  layergeom_ = layer_->geometry();
  specs_ = layer->chamber()->specs();
  id_ = id;

  static constexpr float inv_sqrt_12 = 0.2886751;

  float tpeak = -99.f;

  CSCRecHit2D::ADCContainer adcMap;
  CSCRecHit2D::ChannelContainer wgroups;

  // Find wire hit position and wire properties
  wgroups = wHit.wgroups();

  int wg_left = wgroups[0];
  ;
  int wg_right = wgroups[wgroups.size() - 1];

  int Nwires1 = layergeom_->numberOfWiresPerGroup(wg_left);
  int Nwires2 = layergeom_->numberOfWiresPerGroup(wg_right);

  float Mwire1 = layergeom_->middleWireOfGroup(wg_left);
  float Mwire2 = layergeom_->middleWireOfGroup(wg_right);

  int centerWire_left = (int)(Mwire1 - Nwires1 / 2. + 0.5);
  int centerWire_right = (int)(Mwire2 + Nwires2 / 2.);

  float centerWire = (centerWire_left + centerWire_right) / 2.;

  //---- WGs around dead HV segment regions may need special treatment...
  //---- This is not addressed here.

  float sigmaWire = 0.;
  if (wHit.deadWG() > 0 || wgroups.size() > 2) {
    //---- worst possible case; take most conservative approach
    for (unsigned int iWG = 0; iWG < wgroups.size(); iWG++) {
      sigmaWire += layergeom_->yResolution(wgroups[iWG]);
    }
  } else if (2 == wgroups.size()) {
    //---- 2 WGs - get the larger error (overestimation if a single track is passing
    //---- between the WGs; underestimation if there are two separate signal sources)
    if (layergeom_->yResolution(wgroups[0]) > layergeom_->yResolution(wgroups[1])) {
      sigmaWire = layergeom_->yResolution(wgroups[0]);
    } else {
      sigmaWire = layergeom_->yResolution(wgroups[1]);
    }
  } else if (1 == wgroups.size()) {
    //---- simple - just 1 WG
    sigmaWire = layergeom_->yResolution(wgroups[0]);
  }

  // Find strips position and properties

  CSCRecHit2D::ChannelContainer const& strips = sHit.strips();
  int tmax = sHit.tmax();
  int nStrip = strips.size();
  int idCenterStrip = nStrip / 2;
  int centerStrip = strips[idCenterStrip];

  // Retrieve strip pulseheights from the CSCStripHit
  const std::vector<float>& adc = sHit.s_adc();
  const std::vector<float>& adcRaw = sHit.s_adcRaw();

  std::vector<float> adc2;
  std::vector<float> adc2Raw;

  LogTrace("CSCMake2DRecHit") << "[CSCMake2DRecHit] dump of adc values to be added to rechit follows...";

  for (int iStrip = 0; iStrip < nStrip; ++iStrip) {
    adc2.clear();
    adc2Raw.clear();
    adc2.reserve(4);
    adc2Raw.reserve(4);
    for (int t = 0; t < 4; ++t) {
      adc2.push_back(adc[t + iStrip * 4]);
      adc2Raw.push_back(adcRaw[t + iStrip * 4]);
    }
    //After CMSSW_5_0: ADC value is pedestal-subtracted and electronics-gain corrected
    adcMap.put(strips[iStrip], adc2.begin(), adc2.end());
    // Up to CMSSW_5_0, Rechit takes _raw_ adc values
    // adcMap.put( strips[iStrip], adc2Raw.begin(), adc2Raw.end() );

    LogTrace("CSCMake2DRecHit") << "[CSCMake2DRecHit] strip = " << strips[iStrip] << " adcs= " << adc2Raw[0] << " "
                                << adc2Raw[1] << " " << adc2Raw[2] << " " << adc2Raw[3];
  }

  //The tpeak finding for both edge and non-edge strips has been moved to here
  //tpeak will be a const argument for xMatchGatti_->findXOnStrip
  float adcArray[4];
  for (int t = 0; t < 4; ++t) {
    int k = t + 4 * (idCenterStrip);
    adcArray[t] = adc[k];
  }
  tpeak = peakTimeFinder_->peakTime(tmax, adcArray, tpeak);
  // Just for completeness, the start time of the pulse is 133 ns earlier, according to Stan :)
  LogTrace("CSCRecHit") << "[CSCMake2DRecHit] " << id << " strip=" << centerStrip << ", t_zero=" << tpeak - 133.f
                        << ", tpeak=" << tpeak;

  float positionWithinTheStrip = -99.;
  float sigmaWithinTheStrip = -99.;
  int quality = -1;
  LocalPoint lp0(0., 0.);
  int wglo = wg_left;
  int wghi = wg_right;

  // First wire of first wiregroup in cluster
  wglo = layergeom_->middleWireOfGroup(wglo) + 0.5 - 0.5 * layergeom_->numberOfWiresPerGroup(wglo);
  // Last wire in last wiregroup of cluster (OK if only 1 wiregroup too)
  wghi = layergeom_->middleWireOfGroup(wghi) - 0.5 + 0.5 * layergeom_->numberOfWiresPerGroup(wghi);

  float stripWidth = -99.f;
  // If at the edge, then used 1 strip cluster only
  if (centerStrip == 1 || centerStrip == specs_->nStrips() || nStrip < 2) {
    lp0 = (layergeom_->possibleRecHitPosition(float(centerStrip) - 0.5, wglo, wghi)).first;
    positionWithinTheStrip = 0.f;
    stripWidth = layergeom_->stripPitch(lp0);
    sigmaWithinTheStrip = stripWidth * inv_sqrt_12;
    quality = 2;
  } else {
    // If not at the edge, used cluster of size ClusterSize:
    LocalPoint lp11 = (layergeom_->possibleRecHitPosition(float(centerStrip) - 0.5, wglo, wghi)).first;
    float ymiddle = lp11.y();
    stripWidth = layergeom_->stripPitch(lp11);

    //---- Calculate local position within the strip
    float xWithinChamber = lp11.x();
    quality = 0;
    //check if strip wire intersect is within the sensitive area of chamber
    if (layergeom_->inside(lp11)) {
      xMatchGatti_->findXOnStrip(id,
                                 layer_,
                                 sHit,
                                 centerStrip,
                                 xWithinChamber,
                                 stripWidth,
                                 tpeak,
                                 positionWithinTheStrip,
                                 sigmaWithinTheStrip,
                                 quality);
    }
    lp0 = LocalPoint(xWithinChamber, ymiddle);
  }

  // compute the errors in local x and y
  LocalError localerr = layergeom_->localError(centerStrip, sigmaWithinTheStrip, sigmaWire);

  // Before storing the recHit, take the opportunity to change its time
  if (useTimingCorrections) {
    float chipCorrection = recoConditions_->chipCorrection(id, centerStrip);
    float phaseCorrection = (sHit.stripsl1a()[0] >> (15 - 0) & 0x1) * 25.;
    float chamberCorrection = recoConditions_->chamberTimingCorrection(id);

    GlobalPoint gp0 = layer_->toGlobal(lp0);
    float tofCorrection = gp0.mag() / 29.9792458;
    float signalPropagationSpeed[11] = {0.0, -78, -76, -188, -262, -97, -99, -90, -99, -99, -113};
    float position = lp0.y() / sin(layergeom_->stripAngle(centerStrip));
    float yCorrection = position / signalPropagationSpeed[id_.iChamberType()];
    //printf("RecHit in e:%d s:%d r:%d c:%d l:%d strip:%d \n",id.endcap(),id.station(), id.ring(),id.chamber(),id.layer(),centerStrip);
    //printf("\t tpeak before = %5.2f \t chipCorr %5.2f phaseCorr %5.2f chamberCorr %5.2f tofCorr %5.2f \n",
    //     tpeak,chipCorrection, phaseCorrection,chamberCorrection,tofCorrection);
    //printf("localy = %5.2f, yCorr = %5.2f \n",lp0.y(),yCorrection);
    tpeak = tpeak + chipCorrection + phaseCorrection + chamberCorrection - tofCorrection + yCorrection;
    //printf("\t tpeak after = %5.2f\n",tpeak);
  }

  // Calculate wire time to the half bx level using time bins on
  // Store wire time with a precision of 0.01 as an int (multiply by 100)
  // Convert from bx to ns (multiply by 25)
  int scaledWireTime = 100 * findWireBx(wHit.timeBinsOn(), tpeak, id) * 25;

  //Get the gas-gain correction for this rechit
  float gasGainCorrection = -999.f;
  if (useGasGainCorrections) {
    gasGainCorrection = recoConditions_->gasGainCorrection(id, centerStrip, centerWire);
  }

  float energyDeposit = -999.f;
  if (gasGainCorrection < -998.f) {
    // if the user has chosen not to use the gas gain correction, set the energy to a different nonsense value
    energyDeposit = -998.f;

  } else if (gasGainCorrection < 0.f) {
    // if the gas gain correction from the database is a bad value, set the energy to yet another nonsense value
    energyDeposit = -997.f;

  } else {
    // gas-gain correction is OK, correct the 3x3 ADC sum
    if (adcMap.size() == 12) {
      energyDeposit = adcMap[0] * gasGainCorrection + adcMap[1] * gasGainCorrection + adcMap[2] * gasGainCorrection +
                      adcMap[4] * gasGainCorrection + adcMap[5] * gasGainCorrection + adcMap[6] * gasGainCorrection +
                      adcMap[8] * gasGainCorrection + adcMap[9] * gasGainCorrection + adcMap[10] * gasGainCorrection;

    } else if (adcMap.size() == 4) {
      // if this is an edge strip, set the energy to yet another nonsense value
      energyDeposit = -996.f;
    }
  }


  CSCRecHit2D::ChannelContainer const& L1A_and_strips = sHit.stripsTotal();  
  CSCRecHit2D::ChannelContainer const& BX_and_wgroups = wHit.wgroupsBXandWire();  
  // (sigmaWithinTheStrip/stripWidth) is in strip widths just like positionWithinTheStrip is!

  CSCRecHit2D rechit(id,
                     lp0,
                     localerr,
                     L1A_and_strips,  
                     //adcMap, wgroups, tpeak, positionWithinTheStrip,
                     adcMap,
                     BX_and_wgroups,
                     tpeak,
                     positionWithinTheStrip,  
                     sigmaWithinTheStrip / stripWidth,
                     quality,
                     sHit.deadStrip(),
                     wHit.deadWG(),
                     scaledWireTime,
                     energyDeposit);

  // rechit.print();

  LogTrace("CSCRecHit") << "[CSCMake2DRecHit] rechit created in layer " << id << "... \n" << rechit;

  return rechit;
}

bool CSCMake2DRecHit::isHitInFiducial(const CSCLayer* layer, const CSCRecHit2D& rh) {
  bool isInFiducial = true;
  const CSCLayerGeometry* layergeom_ = layer->geometry();
  LocalPoint rhPosition = rh.localPosition();
  // is the rechit within the chamber?
  //(the problem occurs in ME11a/b otherwise it is OK)
  // we could use also
  //bool inside( const Local3DPoint&, const LocalError&, float scale=1.f ) const;
  if (!layergeom_->inside(rhPosition)) {
    isInFiducial = false;
  }

  return isInFiducial;
}

void CSCMake2DRecHit::setConditions(const CSCRecoConditions* reco) {
  xMatchGatti_->setConditions(reco);
  // And cache for use here
  recoConditions_ = reco;
}

float CSCMake2DRecHit::findWireBx(const std::vector<int>& timeBinsOn, float tpeak, const CSCDetId& id) {
  // Determine the wire Bx from the vector of time bins on for the wire digi with peak time as an intial estimate.
  // Assumes that a single hit should create either one time bin on or two consecutive time bins on
  // so algorithm looks for bin on nearest to peak time and checks if it has a bin on consecutive with it
  float anode_bx_offset = recoConditions_->anodeBXoffset(id);
  float wireBx = -1;
  float timeGuess = tpeak / 25.f + anode_bx_offset;
  float diffMin = 9999.f;
  int bestMatch = -9;
  for (int j = 0; j < (int)timeBinsOn.size(); j++) {
    auto diff = timeGuess - timeBinsOn[j];
    // Find bin on closest to peak time
    if (std::abs(diff) < std::abs(diffMin)) {
      diffMin = diff;
      bestMatch = j;
      wireBx = timeBinsOn[j];
    }
  }
  int side = diffMin > 0 ? 1 : -1;  // diffMin/fabs(diffMin);
  bool unchanged = true;
  // First check if bin on the same side as peak time is on
  if ((bestMatch + side) > -1 &&
      (bestMatch + side) < (int)timeBinsOn.size()) {  // Make sure one next to it within vector limits
    if (timeBinsOn[bestMatch] ==
        (timeBinsOn[bestMatch + side] - side)) {  // See if next bin on in vector is consecutive in time
      // Set time to the average of the two bins
      wireBx = wireBx + 0.5f * side;
      unchanged = false;
    }
  }
  // If no match is found then check the other side
  if ((bestMatch - side) > -1 && (bestMatch - side) < (int)timeBinsOn.size() &&
      unchanged) {                                                         // Make sure one next to it exists
    if (timeBinsOn[bestMatch] == (timeBinsOn[bestMatch - side] + side)) {  // See if nextbin on is consecutive in time
      wireBx = wireBx - 0.5f * side;
    }
  }
  return wireBx - anode_bx_offset;  // expect collision muons to be centered near 0 bx
}