CSCOfflineMonitor Class Reference

#include <CSCOfflineMonitor.h>

Inheritance diagram for CSCOfflineMonitor:

Public Types
enum	AxisType { X = 1, Y = 2, Z = 3 }
enum	LabelType { SMALL, EXTENDED }
Public Types inherited from DQMEDAnalyzer
typedef dqm::reco::DQMStore	DQMStore
typedef dqm::reco::MonitorElement	MonitorElement
Public Types inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
using	CacheTypes = CacheContexts< T... >
using	GlobalCache = typename CacheTypes::GlobalCache
using	HasAbility = AbilityChecker< T... >
using	InputProcessBlockCache = typename CacheTypes::InputProcessBlockCache
using	LuminosityBlockCache = typename CacheTypes::LuminosityBlockCache
using	LuminosityBlockContext = LuminosityBlockContextT< LuminosityBlockCache, RunCache, GlobalCache >
using	LuminosityBlockSummaryCache = typename CacheTypes::LuminosityBlockSummaryCache
using	RunCache = typename CacheTypes::RunCache
using	RunContext = RunContextT< RunCache, GlobalCache >
using	RunSummaryCache = typename CacheTypes::RunSummaryCache

Public Member Functions
	CSCOfflineMonitor (const edm::ParameterSet &pset)
	~CSCOfflineMonitor () override
Public Member Functions inherited from DQMEDAnalyzer
void	accumulate (edm::Event const &event, edm::EventSetup const &setup) final
void	beginLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final
void	beginRun (edm::Run const &run, edm::EventSetup const &setup) final
void	beginStream (edm::StreamID id) final
virtual void	dqmBeginRun (edm::Run const &, edm::EventSetup const &)
	DQMEDAnalyzer ()
void	endLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final
void	endRun (edm::Run const &run, edm::EventSetup const &setup) final
virtual bool	getCanSaveByLumi ()
Public Member Functions inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
	EDProducer ()=default
	EDProducer (const EDProducer &)=delete
bool	hasAbilityToProduceInBeginLumis () const final
bool	hasAbilityToProduceInBeginProcessBlocks () const final
bool	hasAbilityToProduceInBeginRuns () const final
bool	hasAbilityToProduceInEndLumis () const final
bool	hasAbilityToProduceInEndProcessBlocks () const final
bool	hasAbilityToProduceInEndRuns () const final
const EDProducer &	operator= (const EDProducer &)=delete

Protected Member Functions
void	analyze (const edm::Event &event, const edm::EventSetup &eventSetup) override
void	bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override
Protected Member Functions inherited from DQMEDAnalyzer
uint64_t	meId () const

Private Member Functions
void	applyCSClabels (MonitorElement *meHisto, LabelType t, AxisType a)
int	chamberSerial (CSCDetId id)
void	doBXMonitor (edm::Handle< CSCALCTDigiCollection > alcts, edm::Handle< CSCCLCTDigiCollection > clcts, const edm::Event &event, const edm::EventSetup &eventSetup)
void	doEfficiencies (edm::Handle< CSCWireDigiCollection > wires, edm::Handle< CSCStripDigiCollection > strips, edm::Handle< CSCRecHit2DCollection > recHits, edm::Handle< CSCSegmentCollection > cscSegments, edm::ESHandle< CSCGeometry > cscGeom)
void	doOccupancies (edm::Handle< CSCStripDigiCollection > strips, edm::Handle< CSCWireDigiCollection > wires, edm::Handle< CSCRecHit2DCollection > recHits, edm::Handle< CSCSegmentCollection > cscSegments, edm::Handle< CSCCLCTDigiCollection > clcts)
void	doPedestalNoise (edm::Handle< CSCStripDigiCollection > strips, edm::ESHandle< CSCGeometry > cscGeom)
void	doRecHits (edm::Handle< CSCRecHit2DCollection > recHits, edm::Handle< CSCStripDigiCollection > strips, edm::ESHandle< CSCGeometry > cscGeom)
void	doResolution (edm::Handle< CSCSegmentCollection > cscSegments, edm::ESHandle< CSCGeometry > cscGeom)
void	doSegments (edm::Handle< CSCSegmentCollection > cscSegments, edm::ESHandle< CSCGeometry > cscGeom)
void	doStripDigis (edm::Handle< CSCStripDigiCollection > strips)
void	doWireDigis (edm::Handle< CSCWireDigiCollection > wires)
double	extrapolate1D (double initPosition, double initDirection, double parameterOfTheLine)
void	fillEfficiencyHistos (int bin, int flag)
float	fitX (const CLHEP::HepMatrix &sp, const CLHEP::HepMatrix &ep)
float	getSignal (const CSCStripDigiCollection &stripdigis, CSCDetId idRH, int centerStrip)
double	lineParametrization (double z1Position, double z2Position, double z1Direction)
int	typeIndex (CSCDetId id, int flag=1)
bool	withinSensitiveRegion (LocalPoint localPos, const std::array< const float, 4 > &layerBounds, int station, int ring, float shiftFromEdge, float shiftFromDeadZone)

Private Attributes
edm::EDGetTokenT< CSCALCTDigiCollection >	al_token
edm::EDGetTokenT< CSCCLCTDigiCollection >	cl_token
const edm::ESGetToken< CSCGeometry, MuonGeometryRecord >	cscGeomToken_
MonitorElement *	hALCTgetBX
MonitorElement *	hALCTgetBX2Denominator
MonitorElement *	hALCTgetBX2DNumerator
MonitorElement *	hALCTgetBXSerial
MonitorElement *	hALCTMatch
MonitorElement *	hALCTMatch2Denominator
MonitorElement *	hALCTMatch2DNumerator
MonitorElement *	hALCTMatchSerial
MonitorElement *	hCLCTL1A
MonitorElement *	hCLCTL1A2Denominator
MonitorElement *	hCLCTL1A2DNumerator
MonitorElement *	hCLCTL1ASerial
const edm::ESGetToken< CSCCrateMap, CSCCrateMapRcd >	hcrateToken_
MonitorElement *	hCSCOccupancy
MonitorElement *	hEffDenominator
MonitorElement *	hORecHits
MonitorElement *	hORecHitsSerial
MonitorElement *	hOSegments
MonitorElement *	hOSegmentsSerial
MonitorElement *	hOStrips
MonitorElement *	hOStripsAndWiresAndCLCT
MonitorElement *	hOStripSerial
MonitorElement *	hOWires
MonitorElement *	hOWiresAndCLCT
MonitorElement *	hOWireSerial
MonitorElement *	hRHden
std::vector< MonitorElement * >	hRHGlobal
MonitorElement *	hRHnrechits
MonitorElement *	hRHnrechitsHi
MonitorElement *	hRHnum
std::vector< MonitorElement * >	hRHRatioQ
MonitorElement *	hRHSTE2
std::vector< MonitorElement * >	hRHsterr
std::vector< MonitorElement * >	hRHstpos
std::vector< MonitorElement * >	hRHSumQ
std::vector< MonitorElement * >	hRHTiming
std::vector< MonitorElement * >	hRHTimingAnode
std::vector< MonitorElement * >	hSChiSq
MonitorElement *	hSChiSqAll
std::vector< MonitorElement * >	hSChiSqProb
MonitorElement *	hSChiSqProbAll
MonitorElement *	hSden
MonitorElement *	hSensitiveAreaEvt
MonitorElement *	hSGlobalPhi
MonitorElement *	hSGlobalTheta
std::vector< MonitorElement * >	hSnhits
MonitorElement *	hSnhitsAll
MonitorElement *	hSnSegments
MonitorElement *	hSnum
std::vector< MonitorElement * >	hSResid
MonitorElement *	hSSTE2
MonitorElement *	hSTimeAnode
std::vector< MonitorElement * >	hSTimeAnodeByChamberType
MonitorElement *	hSTimeAnodeSerial
MonitorElement *	hSTimeCathode
std::vector< MonitorElement * >	hSTimeCathodeByChamberType
MonitorElement *	hSTimeCathodeSerial
MonitorElement *	hSTimeCombined
std::vector< MonitorElement * >	hSTimeCombinedByChamberType
MonitorElement *	hSTimeCombinedSerial
MonitorElement *	hSTimeDiff
std::vector< MonitorElement * >	hSTimeDiffByChamberType
MonitorElement *	hSTimeDiffSerial
MonitorElement *	hSTimeVsTOF
MonitorElement *	hSTimeVsZ
MonitorElement *	hStripNFired
MonitorElement *	hStripNFiredHi
std::vector< MonitorElement * >	hStripNumber
std::vector< MonitorElement * >	hStripPed
MonitorElement *	hStripSTE2
MonitorElement *	hWirenGroupsTotal
MonitorElement *	hWirenGroupsTotalHi
std::vector< MonitorElement * >	hWireNumber
MonitorElement *	hWireSTE2
std::vector< MonitorElement * >	hWireTBin
edm::ParameterSet	param
edm::EDGetTokenT< FEDRawDataCollection >	rd_token
edm::EDGetTokenT< CSCRecHit2DCollection >	rh_token
edm::EDGetTokenT< CSCStripDigiCollection >	sd_token
edm::EDGetTokenT< CSCSegmentCollection >	se_token
edm::EDGetTokenT< CSCWireDigiCollection >	wd_token

Additional Inherited Members
Static Public Member Functions inherited from DQMEDAnalyzer
static void	globalEndJob (DQMEDAnalyzerGlobalCache const *)
static void	globalEndLuminosityBlockProduce (edm::LuminosityBlock &lumi, edm::EventSetup const &setup, LuminosityBlockContext const *context)
static void	globalEndRunProduce (edm::Run &run, edm::EventSetup const &setup, RunContext const *context)
static std::unique_ptr< DQMEDAnalyzerGlobalCache >	initializeGlobalCache (edm::ParameterSet const &)
Protected Attributes inherited from DQMEDAnalyzer
edm::EDPutTokenT< DQMToken >	lumiToken_
edm::EDPutTokenT< DQMToken >	runToken_
unsigned int	streamId_

Detailed Description

Simple package for offline CSC DQM based on RecoLocalMuon/CSCValidation: digis, rechits, segments

Andrew Kubik, Northwestern University, Oct 2008

Definition at line 71 of file CSCOfflineMonitor.h.

Member Enumeration Documentation

AxisType

enum CSCOfflineMonitor::AxisType

Enumerator
X
Y
Z

Definition at line 77 of file CSCOfflineMonitor.h.

{ X = 1, Y = 2, Z = 3 };

LabelType

enum CSCOfflineMonitor::LabelType

Enumerator
SMALL
EXTENDED

Definition at line 76 of file CSCOfflineMonitor.h.

{ SMALL, EXTENDED };

Constructor & Destructor Documentation

CSCOfflineMonitor()

CSCOfflineMonitor::CSCOfflineMonitor

(

const edm::ParameterSet &

pset

)

Definition at line 13 of file CSCOfflineMonitor.cc.

References al_token, cl_token, muonDTDigis_cfi::pset, rd_token, rh_token, sd_token, se_token, and wd_token.

    : cscGeomToken_(esConsumes<CSCGeometry, MuonGeometryRecord>()),
      hcrateToken_(esConsumes<CSCCrateMap, CSCCrateMapRcd>()) {
  rd_token = consumes<FEDRawDataCollection>(pset.getParameter<edm::InputTag>("FEDRawDataCollectionTag"));
  sd_token = consumes<CSCStripDigiCollection>(pset.getParameter<edm::InputTag>("stripDigiTag"));
  wd_token = consumes<CSCWireDigiCollection>(pset.getParameter<edm::InputTag>("wireDigiTag"));
  al_token = consumes<CSCALCTDigiCollection>(pset.getParameter<edm::InputTag>("alctDigiTag"));
  cl_token = consumes<CSCCLCTDigiCollection>(pset.getParameter<edm::InputTag>("clctDigiTag"));
  rh_token = consumes<CSCRecHit2DCollection>(pset.getParameter<edm::InputTag>("cscRecHitTag"));
  se_token = consumes<CSCSegmentCollection>(pset.getParameter<edm::InputTag>("cscSegTag"));
}

~CSCOfflineMonitor()

CSCOfflineMonitor::~CSCOfflineMonitor ( )

inlineoverride

Definition at line 74 of file CSCOfflineMonitor.h.

{};

Member Function Documentation

analyze()

void CSCOfflineMonitor::analyze ( const edm::Event &  event, const edm::EventSetup &  eventSetup  )

overrideprotectedvirtual

Reimplemented from DQMEDAnalyzer.

Definition at line 826 of file CSCOfflineMonitor.cc.

References al_token, cl_token, cscGeomToken_, dtChamberEfficiency_cfi::cscSegments, doBXMonitor(), doEfficiencies(), doOccupancies(), doPedestalNoise(), doRecHits(), doResolution(), doSegments(), doStripDigis(), doWireDigis(), options_cfi::eventSetup, FastTrackerRecHitMaskProducer_cfi::recHits, rh_token, sd_token, se_token, DigiDM_cff::strips, wd_token, and DigiDM_cff::wires.

                                                                                      {
  edm::Handle<CSCWireDigiCollection> wires;
  edm::Handle<CSCStripDigiCollection> strips;
  edm::Handle<CSCALCTDigiCollection> alcts;
  edm::Handle<CSCCLCTDigiCollection> clcts;
  event.getByToken(sd_token, strips);
  event.getByToken(wd_token, wires);
  event.getByToken(al_token, alcts);
  event.getByToken(cl_token, clcts);

  // Get the CSC Geometry :
  edm::ESHandle<CSCGeometry> cscGeom;

  cscGeom = eventSetup.getHandle(cscGeomToken_);

  // Get the RecHits collection :
  edm::Handle<CSCRecHit2DCollection> recHits;
  event.getByToken(rh_token, recHits);

  // get CSC segment collection
  edm::Handle<CSCSegmentCollection> cscSegments;
  event.getByToken(se_token, cscSegments);

  doOccupancies(strips, wires, recHits, cscSegments, clcts);
  doStripDigis(strips);
  doWireDigis(wires);
  doRecHits(recHits, strips, cscGeom);
  doSegments(cscSegments, cscGeom);
  doResolution(cscSegments, cscGeom);
  doPedestalNoise(strips, cscGeom);
  doEfficiencies(wires, strips, recHits, cscSegments, cscGeom);
  doBXMonitor(alcts, clcts, event, eventSetup);
}

applyCSClabels()

void CSCOfflineMonitor::applyCSClabels ( MonitorElement *  meHisto, LabelType  t, AxisType  a  )

private

Definition at line 2149 of file CSCOfflineMonitor.cc.

References a, EXTENDED, hlt_dqm_clientPB-live_cfg::me, SMALL, and submitPVValidationJobs::t.

Referenced by bookHistograms().

                                                                                  {
  if (me != nullptr) {
    me->setAxisTitle("Chamber #");
    if (t == EXTENDED) {
      me->setBinLabel(1, "ME -4/2", a);
      me->setBinLabel(2, "ME -4/1", a);
      me->setBinLabel(3, "ME -3/2", a);
      me->setBinLabel(4, "ME -3/1", a);
      me->setBinLabel(5, "ME -2/2", a);
      me->setBinLabel(6, "ME -2/1", a);
      me->setBinLabel(7, "ME -1/3", a);
      me->setBinLabel(8, "ME -1/2", a);
      me->setBinLabel(9, "ME -1/1b", a);
      me->setBinLabel(10, "ME -1/1a", a);
      me->setBinLabel(11, "ME +1/1a", a);
      me->setBinLabel(12, "ME +1/1b", a);
      me->setBinLabel(13, "ME +1/2", a);
      me->setBinLabel(14, "ME +1/3", a);
      me->setBinLabel(15, "ME +2/1", a);
      me->setBinLabel(16, "ME +2/2", a);
      me->setBinLabel(17, "ME +3/1", a);
      me->setBinLabel(18, "ME +3/2", a);
      me->setBinLabel(19, "ME +4/1", a);
      me->setBinLabel(20, "ME +4/2", a);
    } else if (t == SMALL) {
      me->setBinLabel(1, "ME -4/1", a);
      me->setBinLabel(2, "ME -3/2", a);
      me->setBinLabel(3, "ME -3/1", a);
      me->setBinLabel(4, "ME -2/2", a);
      me->setBinLabel(5, "ME -2/1", a);
      me->setBinLabel(6, "ME -1/3", a);
      me->setBinLabel(7, "ME -1/2", a);
      me->setBinLabel(8, "ME -1/1b", a);
      me->setBinLabel(9, "ME -1/1a", a);
      me->setBinLabel(10, "ME +1/1a", a);
      me->setBinLabel(11, "ME +1/1b", a);
      me->setBinLabel(12, "ME +1/2", a);
      me->setBinLabel(13, "ME +1/3", a);
      me->setBinLabel(14, "ME +2/1", a);
      me->setBinLabel(15, "ME +2/2", a);
      me->setBinLabel(16, "ME +3/1", a);
      me->setBinLabel(17, "ME +3/2", a);
      me->setBinLabel(18, "ME +4/1", a);
    }
  }
}

bookHistograms()

void CSCOfflineMonitor::bookHistograms ( DQMStore::IBooker &  ibooker, edm::Run const &  iRun, edm::EventSetup const &    )

overrideprotectedvirtual

Implements DQMEDAnalyzer.

Definition at line 25 of file CSCOfflineMonitor.cc.

References applyCSClabels(), dqm::implementation::IBooker::book1D(), dqm::implementation::IBooker::book2D(), dqm::implementation::NavigatorBase::cd(), EXTENDED, hALCTgetBX, hALCTgetBX2Denominator, hALCTgetBX2DNumerator, hALCTgetBXSerial, hALCTMatch, hALCTMatch2Denominator, hALCTMatch2DNumerator, hALCTMatchSerial, hCLCTL1A, hCLCTL1A2Denominator, hCLCTL1A2DNumerator, hCLCTL1ASerial, hCSCOccupancy, hEffDenominator, hORecHits, hORecHitsSerial, hOSegments, hOSegmentsSerial, hOStrips, hOStripsAndWiresAndCLCT, hOStripSerial, hOWires, hOWiresAndCLCT, hOWireSerial, hRHden, hRHGlobal, hRHnrechits, hRHnrechitsHi, hRHnum, hRHRatioQ, hRHSTE2, hRHsterr, hRHstpos, hRHSumQ, hRHTiming, hRHTimingAnode, hSChiSq, hSChiSqAll, hSChiSqProb, hSChiSqProbAll, hSden, hSensitiveAreaEvt, hSGlobalPhi, hSGlobalTheta, hSnhits, hSnhitsAll, hSnSegments, hSnum, hSResid, hSSTE2, hSTimeAnode, hSTimeAnodeByChamberType, hSTimeAnodeSerial, hSTimeCathode, hSTimeCathodeByChamberType, hSTimeCathodeSerial, hSTimeCombined, hSTimeCombinedByChamberType, hSTimeCombinedSerial, hSTimeDiff, hSTimeDiffByChamberType, hSTimeDiffSerial, hSTimeVsTOF, hSTimeVsZ, hStripNFired, hStripNFiredHi, hStripNumber, hStripPed, hStripSTE2, hWirenGroupsTotal, hWirenGroupsTotalHi, hWireNumber, hWireSTE2, hWireTBin, dqm::impl::MonitorElement::setAxisTitle(), dqm::impl::MonitorElement::setBinLabel(), dqm::implementation::NavigatorBase::setCurrentFolder(), X, and Y.

                                                               {
  // occupancies
  ibooker.cd();
  ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/Occupancy");

  hCSCOccupancy = ibooker.book1D("hCSCOccupancy", "overall CSC occupancy", 13, -0.5, 12.5);
  hCSCOccupancy->setBinLabel(2, "Total Events");
  hCSCOccupancy->setBinLabel(4, "# Events with Wires");
  hCSCOccupancy->setBinLabel(6, "# Events with Strips");
  hCSCOccupancy->setBinLabel(8, "# Events with Wires&Strips");
  hCSCOccupancy->setBinLabel(10, "# Events with Rechits");
  hCSCOccupancy->setBinLabel(12, "# Events with Segments");
  hOWiresAndCLCT = ibooker.book2D("hOWiresAndCLCT", "Wire and CLCT Digi Occupancy ", 36, 0.5, 36.5, 20, 0.5, 20.5);
  hOWires = ibooker.book2D("hOWires", "Wire Digi Occupancy", 36, 0.5, 36.5, 20, 0.5, 20.5);
  hOWireSerial = ibooker.book1D("hOWireSerial", "Wire Occupancy by Chamber Serial", 601, -0.5, 600.5);
  hOWireSerial->setAxisTitle("Chamber Serial Number");
  hOStrips = ibooker.book2D("hOStrips", "Strip Digi Occupancy", 36, 0.5, 36.5, 20, 0.5, 20.5);
  hOStripSerial = ibooker.book1D("hOStripSerial", "Strip Occupancy by Chamber Serial", 601, -0.5, 600.5);
  hOStripSerial->setAxisTitle("Chamber Serial Number");
  hOStripsAndWiresAndCLCT =
      ibooker.book2D("hOStripsAndWiresAndCLCT", "Strip And Wire And CLCT Digi Occupancy", 36, 0.5, 36.5, 20, 0.5, 20.5);
  hOStripsAndWiresAndCLCT->setAxisTitle("Chamber #");
  hORecHits = ibooker.book2D("hORecHits", "RecHit Occupancy", 36, 0.5, 36.5, 20, 0.5, 20.5);
  hORecHitsSerial = ibooker.book1D("hORecHitSerial", "RecHit Occupancy by Chamber Serial", 601, -0.5, 600.5);
  hORecHitsSerial->setAxisTitle("Chamber Serial Number");
  hOSegments = ibooker.book2D("hOSegments", "Segment Occupancy", 36, 0.5, 36.5, 20, 0.5, 20.5);
  hOSegmentsSerial = ibooker.book1D("hOSegmentSerial", "Segment Occupancy by Chamber Serial", 601, -0.5, 600.5);
  hOSegmentsSerial->setAxisTitle("Chamber Serial Number");

  // wire digis
  ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/Digis");

  // For low multiplicities (e.g. low or no pileup)
  hWirenGroupsTotal =
      ibooker.book1D("hWirenGroupsTotal", "Fired Wires per Event; # Wiregroups Fired", 250, 0., 250.);  // 1 bin is 1
  // For high multiplcities (e.g. with pileup)
  hWirenGroupsTotalHi =
      ibooker.book1D("hWirenGroupsTotalHi", "Fired Wires per Event; # Wiregroups Fired", 250, 0., 1000.);  // i bin is 4

  hWireTBin.push_back(ibooker.book1D("hWireTBin_m42", "Wire TBin Fired (ME -4/2); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_m41", "Wire TBin Fired (ME -4/1); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_m32", "Wire TBin Fired (ME -3/2); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_m31", "Wire TBin Fired (ME -3/1); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_m22", "Wire TBin Fired (ME -2/2); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_m21", "Wire TBin Fired (ME -2/1); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_m11a", "Wire TBin Fired (ME -1/1a); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_m13", "Wire TBin Fired (ME -1/3); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_m12", "Wire TBin Fired (ME -1/2); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_m11b", "Wire TBin Fired (ME -1/1b); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_p11b", "Wire TBin Fired (ME +1/1b); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_p12", "Wire TBin Fired (ME +1/2); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_p13", "Wire TBin Fired (ME +1/3); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_p11a", "Wire TBin Fired (ME +1/1a); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_p21", "Wire TBin Fired (ME +2/1); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_p22", "Wire TBin Fired (ME +2/2); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_p31", "Wire TBin Fired (ME +3/1); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_p32", "Wire TBin Fired (ME +3/2); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_p41", "Wire TBin Fired (ME +4/1); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireTBin.push_back(ibooker.book1D("hWireTBin_p42", "Wire TBin Fired (ME +4/2); Time Bin (25ns)", 17, -0.5, 16.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_m42", "Wiregroup Number Fired (ME -4/2); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_m41", "Wiregroup Number Fired (ME -4/1); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_m32", "Wiregroup Number Fired (ME -3/2); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_m31", "Wiregroup Number Fired (ME -3/1); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_m22", "Wiregroup Number Fired (ME -2/2); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_m21", "Wiregroup Number Fired (ME -2/1); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_m11a", "Wiregroup Number Fired (ME -1/1a); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_m13", "Wiregroup Number Fired (ME -1/3); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_m12", "Wiregroup Number Fired (ME -1/2); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_m11b", "Wiregroup Number Fired (ME -1/1b); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_p11b", "Wiregroup Number Fired (ME +1/1b); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_p12", "Wiregroup Number Fired (ME +1/2); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_p13", "Wiregroup Number Fired (ME +1/3); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_p11a", "Wiregroup Number Fired (ME +1/1a); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_p21", "Wiregroup Number Fired (ME +2/1); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_p22", "Wiregroup Number Fired (ME +2/2); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_p31", "Wiregroup Number Fired (ME +3/1); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_p32", "Wiregroup Number Fired (ME +3/2); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_p41", "Wiregroup Number Fired (ME +4/1); Wiregroup #", 113, -0.5, 112.5));
  hWireNumber.push_back(
      ibooker.book1D("hWireNumber_p42", "Wiregroup Number Fired (ME +4/2); Wiregroup #", 113, -0.5, 112.5));

  // strip digis

  // For low multiplicities (e.g. low or no pileup)
  hStripNFired = ibooker.book1D(
      "hStripNFired", "Fired Strips per Event; # Strips Fired (above 13 ADC)", 400, 0., 400.);  // 1 bin is 1
  // For high multiplcities (e.g. with pileup)
  hStripNFiredHi = ibooker.book1D(
      "hStripNFiredHi", "Fired Strips per Event; # Strips Fired (above 13 ADC)", 500, 0., 2000.);  // 1 bin is 4

  hStripNumber.push_back(
      ibooker.book1D("hStripNumber_m42", "Strip Number Fired (ME -4/2); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(
      ibooker.book1D("hStripNumber_m41", "Strip Number Fired (ME -4/1); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(
      ibooker.book1D("hStripNumber_m32", "Strip Number Fired (ME -3/2); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(
      ibooker.book1D("hStripNumber_m31", "Strip Number Fired (ME -3/1); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(
      ibooker.book1D("hStripNumber_m22", "Strip Number Fired (ME -2/2); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(
      ibooker.book1D("hStripNumber_m21", "Strip Number Fired (ME -2/1); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(ibooker.book1D(
      "hStripNumber_m11a", "Strip Number Fired (ME -1/1a); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(
      ibooker.book1D("hStripNumber_m13", "Strip Number Fired (ME -1/3); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(
      ibooker.book1D("hStripNumber_m12", "Strip Number Fired (ME -1/2); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(ibooker.book1D(
      "hStripNumber_m11b", "Strip Number Fired (ME -1/1b); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(ibooker.book1D(
      "hStripNumber_p11b", "Strip Number Fired (ME +1/1b); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(
      ibooker.book1D("hStripNumber_p12", "Strip Number Fired (ME +1/2); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(
      ibooker.book1D("hStripNumber_p13", "Strip Number Fired (ME +1/3); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(ibooker.book1D(
      "hStripNumber_p11a", "Strip Number Fired (ME +1/1a); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(
      ibooker.book1D("hStripNumber_p21", "Strip Number Fired (ME +2/1); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(
      ibooker.book1D("hStripNumber_p22", "Strip Number Fired (ME +2/2); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(
      ibooker.book1D("hStripNumber_p31", "Strip Number Fired (ME +3/1); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(
      ibooker.book1D("hStripNumber_p32", "Strip Number Fired (ME +3/2); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(
      ibooker.book1D("hStripNumber_p41", "Strip Number Fired (ME +4/1); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));
  hStripNumber.push_back(ibooker.book1D(
      "hStripNumber_p42", "Stripgroup Number Fired (ME +4/2); Strip # Fired (above 13 ADC)", 81, -0.5, 80.5));

  // pedestal noise
  ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/PedestalNoise");

  hStripPed.push_back(
      ibooker.book1D("hStripPedMEm42", "Pedestal Noise Distribution Chamber ME -4/2; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEm41", "Pedestal Noise Distribution Chamber ME -4/1; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEm32", "Pedestal Noise Distribution Chamber ME -3/2; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEm31", "Pedestal Noise Distribution Chamber ME -3/1; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEm22", "Pedestal Noise Distribution Chamber ME -2/2; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEm21", "Pedestal Noise Distribution Chamber ME -2/1; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEm11a", "Pedestal Noise Distribution Chamber ME -1/1; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEm13", "Pedestal Noise Distribution Chamber ME -1/3; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEm12", "Pedestal Noise Distribution Chamber ME -1/2; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEm11b", "Pedestal Noise Distribution Chamber ME -1/1; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEp11b", "Pedestal Noise Distribution Chamber ME +1/1; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEp12", "Pedestal Noise Distribution Chamber ME +1/2; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEp13", "Pedestal Noise Distribution Chamber ME +1/3; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEp11a", "Pedestal Noise Distribution Chamber ME +1/1; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEp21", "Pedestal Noise Distribution Chamber ME +2/1; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEp22", "Pedestal Noise Distribution Chamber ME +2/2; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEp31", "Pedestal Noise Distribution Chamber ME +3/1; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEp32", "Pedestal Noise Distribution Chamber ME +3/2; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEp41", "Pedestal Noise Distribution Chamber ME +4/1; ADC Counts", 50, -25., 25.));
  hStripPed.push_back(
      ibooker.book1D("hStripPedMEp42", "Pedestal Noise Distribution Chamber ME +4/2; ADC Counts", 50, -25., 25.));

  // rechits
  ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/recHits");

  // For low multiplicities (e.g. low or no pileup)
  hRHnrechits = ibooker.book1D("hRHnrechits", "RecHits per Event; # of RecHits", 100, 0., 100.);  // 1 bin is 1
  // For high multiplcities (e.g. with pileup)
  hRHnrechitsHi = ibooker.book1D("hRHnrechitsHi", "RecHits per Event; # of RecHits", 250, 0., 1000.);  // 1 bin is 4

  hRHGlobal.push_back(ibooker.book2D(
      "hRHGlobalp1", "recHit global X,Y station +1; Global X (cm); Global Y (cm)", 100, -800., 800., 100, -800., 800.));
  hRHGlobal.push_back(ibooker.book2D(
      "hRHGlobalp2", "recHit global X,Y station +2; Global X (cm); Global Y (cm)", 100, -800., 800., 100, -800., 800.));
  hRHGlobal.push_back(ibooker.book2D(
      "hRHGlobalp3", "recHit global X,Y station +3; Global X (cm); Global Y (cm)", 100, -800., 800., 100, -800., 800.));
  hRHGlobal.push_back(ibooker.book2D(
      "hRHGlobalp4", "recHit global X,Y station +4; Global X (cm); Global Y (cm)", 100, -800., 800., 100, -800., 800.));
  hRHGlobal.push_back(ibooker.book2D(
      "hRHGlobalm1", "recHit global X,Y station -1; Global X (cm); Global Y (cm)", 100, -800., 800., 100, -800., 800.));
  hRHGlobal.push_back(ibooker.book2D(
      "hRHGlobalm2", "recHit global X,Y station -2; Global X (cm); Global Y (cm)", 100, -800., 800., 100, -800., 800.));
  hRHGlobal.push_back(ibooker.book2D(
      "hRHGlobalm3", "recHit global X,Y station -3; Global X (cm); Global Y (cm)", 100, -800., 800., 100, -800., 800.));
  hRHGlobal.push_back(ibooker.book2D(
      "hRHGlobalm4", "recHit global X,Y station -4; Global X (cm); Global Y (cm)", 100, -800., 800., 100, -800., 800.));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQm42", "Sum 3x3 recHit Charge (ME -4/2); ADC counts", 100, 0, 2000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQm41", "Sum 3x3 recHit Charge (ME -4/1); ADC counts", 100, 0, 2000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQm32", "Sum 3x3 recHit Charge (ME -3/2); ADC counts", 100, 0, 2000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQm31", "Sum 3x3 recHit Charge (ME -3/1); ADC counts", 100, 0, 2000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQm22", "Sum 3x3 recHit Charge (ME -2/2); ADC counts", 100, 0, 2000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQm21", "Sum 3x3 recHit Charge (ME -2/1); ADC counts", 100, 0, 2000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQm11a", "Sum 3x3 recHit Charge (ME -1/1a); ADC counts", 100, 0, 4000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQm13", "Sum 3x3 recHit Charge (ME -1/3); ADC counts", 100, 0, 2000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQm12", "Sum 3x3 recHit Charge (ME -1/2); ADC counts", 100, 0, 2000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQm11b", "Sum 3x3 recHit Charge (ME -1/1b); ADC counts", 100, 0, 4000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQp11b", "Sum 3x3 recHit Charge (ME +1/1b); ADC counts", 100, 0, 4000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQp12", "Sum 3x3 recHit Charge (ME +1/2); ADC counts", 100, 0, 2000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQp13", "Sum 3x3 recHit Charge (ME +1/3); ADC counts", 100, 0, 2000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQp11a", "Sum 3x3 recHit Charge (ME +1/1a); ADC counts", 100, 0, 4000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQp21", "Sum 3x3 recHit Charge (ME +2/1); ADC counts", 100, 0, 2000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQp22", "Sum 3x3 recHit Charge (ME +2/2); ADC counts", 100, 0, 2000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQp31", "Sum 3x3 recHit Charge (ME +3/1); ADC counts", 100, 0, 2000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQp32", "Sum 3x3 recHit Charge (ME +3/2); ADC counts", 100, 0, 2000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQp41", "Sum 3x3 recHit Charge (ME +4/1); ADC counts", 100, 0, 2000));
  hRHSumQ.push_back(ibooker.book1D("hRHSumQp42", "Sum 3x3 recHit Charge (ME +4/2); ADC counts", 100, 0, 2000));
  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm42", "Charge Ratio (Ql+Qr)/Qt (ME -4/2); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm41", "Charge Ratio (Ql+Qr)/Qt (ME -4/1); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm32", "Charge Ratio (Ql+Qr)/Qt (ME -3/2); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm31", "Charge Ratio (Ql+Qr)/Qt (ME -3/1); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm22", "Charge Ratio (Ql+Qr)/Qt (ME -2/2); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm21", "Charge Ratio (Ql+Qr)/Qt (ME -2/1); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(
      ibooker.book1D("hRHRatioQm11a", "Charge Ratio (Ql+Qr)/Qt (ME -1/1a); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm13", "Charge Ratio (Ql+Qr)/Qt (ME -1/3); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm12", "Charge Ratio (Ql+Qr)/Qt (ME -1/2); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(
      ibooker.book1D("hRHRatioQm11b", "Charge Ratio (Ql+Qr)/Qt (ME -1/1b); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(
      ibooker.book1D("hRHRatioQp11b", "Charge Ratio (Ql+Qr)/Qt (ME +1/1b); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp12", "Charge Ratio (Ql+Qr)/Qt (ME +1/2); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp13", "Charge Ratio (Ql+Qr)/Qt (ME +1/3); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(
      ibooker.book1D("hRHRatioQp11a", "Charge Ratio (Ql+Qr)/Qt (ME +1/1a); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp21", "Charge Ratio (Ql+Qr)/Qt (ME +2/1); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp22", "Charge Ratio (Ql+Qr)/Qt (ME +2/2); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp31", "Charge Ratio (Ql+Qr)/Qt (ME +3/1); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp32", "Charge Ratio (Ql+Qr)/Qt (ME +3/2); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp41", "Charge Ratio (Ql+Qr)/Qt (ME +4/1); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp42", "Charge Ratio (Ql+Qr)/Qt (ME +4/2); (Ql+Qr)/Qt", 100, -0.1, 1.1));
  hRHTiming.push_back(ibooker.book1D("hRHTimingm42", "recHit Time (ME -4/2); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingm41", "recHit Time (ME -4/1); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingm32", "recHit Time (ME -3/2); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingm31", "recHit Time (ME -3/1); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingm22", "recHit Time (ME -2/2); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingm21", "recHit Time (ME -2/1); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingm11a", "recHit Time (ME -1/1a); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingm13", "recHit Time (ME -1/3); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingm12", "recHit Time (ME -1/2); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingm11b", "recHit Time (ME -1/1b); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingp11b", "recHit Time (ME +1/1b); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingp12", "recHit Time (ME +1/2); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingp13", "recHit Time (ME +1/3); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingp11a", "recHit Time (ME +1/1a); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingp21", "recHit Time (ME +2/1); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingp22", "recHit Time (ME +2/2); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingp31", "recHit Time (ME +3/1); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingp32", "recHit Time (ME +3/2); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingp41", "recHit Time (ME +4/1); ns", 200, -500., 500.));
  hRHTiming.push_back(ibooker.book1D("hRHTimingp42", "recHit Time (ME +4/2); ns", 200, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem42", "Anode recHit Time (ME -4/2); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem41", "Anode recHit Time (ME -4/1); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem32", "Anode recHit Time (ME -3/2); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem31", "Anode recHit Time (ME -3/1); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem22", "Anode recHit Time (ME -2/2); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem21", "Anode recHit Time (ME -2/1); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem11a", "Anode recHit Time (ME -1/1a); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem13", "Anode recHit Time (ME -1/3); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem12", "Anode recHit Time (ME -1/2); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem11b", "Anode recHit Time (ME -1/1b); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep11b", "Anode recHit Time (ME +1/1b); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep12", "Anode recHit Time (ME +1/2); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep13", "Anode recHit Time (ME +1/3); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep11a", "Anode recHit Time (ME +1/1a); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep21", "Anode recHit Time (ME +2/1); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep22", "Anode recHit Time (ME +2/2); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep31", "Anode recHit Time (ME +3/1); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep32", "Anode recHit Time (ME +3/2); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep41", "Anode recHit Time (ME +4/1); ns", 80, -500., 500.));
  hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep42", "Anode recHit Time (ME +4/2); ns", 80, -500., 500.));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposm42", "Reconstructed Position on Strip (ME -4/2); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposm41", "Reconstructed Position on Strip (ME -4/1); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposm32", "Reconstructed Position on Strip (ME -3/2); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposm31", "Reconstructed Position on Strip (ME -3/1); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposm22", "Reconstructed Position on Strip (ME -2/2); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposm21", "Reconstructed Position on Strip (ME -2/1); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposm11a", "Reconstructed Position on Strip (ME -1/1a); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposm13", "Reconstructed Position on Strip (ME -1/3); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposm12", "Reconstructed Position on Strip (ME -1/2); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposm11b", "Reconstructed Position on Strip (ME -1/1b); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposp11b", "Reconstructed Position on Strip (ME +1/1b); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposp12", "Reconstructed Position on Strip (ME +1/2); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposp13", "Reconstructed Position on Strip (ME +1/3); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposp11a", "Reconstructed Position on Strip (ME +1/1a); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposp21", "Reconstructed Position on Strip (ME +2/1); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposp22", "Reconstructed Position on Strip (ME +2/2); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposp31", "Reconstructed Position on Strip (ME +3/1); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposp32", "Reconstructed Position on Strip (ME +3/2); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposp41", "Reconstructed Position on Strip (ME +4/1); Strip Widths", 120, -0.6, 0.6));
  hRHstpos.push_back(
      ibooker.book1D("hRHstposp42", "Reconstructed Position on Strip (ME +4/2); Strip Widths", 120, -0.6, 0.6));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrm42", "Estimated Error on Strip Measurement (ME -4/2); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrm41", "Estimated Error on Strip Measurement (ME -4/1); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrm32", "Estimated Error on Strip Measurement (ME -3/2); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrm31", "Estimated Error on Strip Measurement (ME -3/1); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrm22", "Estimated Error on Strip Measurement (ME -2/2); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrm21", "Estimated Error on Strip Measurement (ME -2/1); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrm11a", "Estimated Error on Strip Measurement (ME -1/1a); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrm13", "Estimated Error on Strip Measurement (ME -1/3); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrm12", "Estimated Error on Strip Measurement (ME -1/2); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrm11b", "Estimated Error on Strip Measurement (ME -1/1b); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrp11b", "Estimated Error on Strip Measurement (ME +1/1b); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrp12", "Estimated Error on Strip Measurement (ME +1/2); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrp13", "Estimated Error on Strip Measurement (ME +1/3); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrp11a", "Estimated Error on Strip Measurement (ME +1/1a); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrp21", "Estimated Error on Strip Measurement (ME +2/1); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrp22", "Estimated Error on Strip Measurement (ME +2/2); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrp31", "Estimated Error on Strip Measurement (ME +3/1); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrp32", "Estimated Error on Strip Measurement (ME +3/2); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrp41", "Estimated Error on Strip Measurement (ME +4/1); Strip Widths", 75, -0.01, 0.24));
  hRHsterr.push_back(
      ibooker.book1D("hRHsterrp42", "Estimated Error on Strip Measurement (ME +4/2); Strip Widths", 75, -0.01, 0.24));

  // segments
  ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/Segments");

  hSnSegments = ibooker.book1D("hSnSegments", "Segments per Event; # of Segments", 100, 0., 100.);  // 1 bin is 1

  hSnhitsAll = ibooker.book1D("hSnhits", "N hits on Segments; # of hits", 8, -0.5, 7.5);
  hSnhits.push_back(ibooker.book1D("hSnhitsm42", "# of hits on Segments (ME -4/2); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsm41", "# of hits on Segments (ME -4/1); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsm32", "# of hits on Segments (ME -3/2); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsm31", "# of hits on Segments (ME -3/1); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsm22", "# of hits on Segments (ME -2/2); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsm21", "# of hits on Segments (ME -2/1); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsm11a", "# of hits on Segments (ME -1/1a); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsm13", "# of hits on Segments (ME -1/3); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsm12", "# of hits on Segments (ME -1/2); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsm11b", "# of hits on Segments (ME -1/1b); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsp11b", "# of hits on Segments (ME +1/1b); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsp12", "# of hits on Segments (ME +1/2); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsp13", "# of hits on Segments (ME +1/3); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsp11a", "# of hits on Segments (ME +1/1a); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsp21", "# of hits on Segments (ME +2/1); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsp22", "# of hits on Segments (ME +2/2); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsp31", "# of hits on Segments (ME +3/1); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsp32", "# of hits on Segments (ME +3/2); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsp41", "# of hits on Segments (ME +4/1); # of hits", 8, -0.5, 7.5));
  hSnhits.push_back(ibooker.book1D("hSnhitsp42", "# of hits on Segments (ME +4/2); # of hits", 8, -0.5, 7.5));
  hSChiSqAll = ibooker.book1D("hSChiSq", "Segment Normalized Chi2; Chi2/ndof", 110, -0.05, 10.5);
  hSChiSq.push_back(ibooker.book1D("hSChiSqm42", "Segment Normalized Chi2 (ME -4/2); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqm41", "Segment Normalized Chi2 (ME -4/1); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqm32", "Segment Normalized Chi2 (ME -3/2); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqm31", "Segment Normalized Chi2 (ME -3/1); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqm22", "Segment Normalized Chi2 (ME -2/2); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqm21", "Segment Normalized Chi2 (ME -2/1); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqm11a", "Segment Normalized Chi2 (ME -1/1a); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqm13", "Segment Normalized Chi2 (ME -1/3); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqm12", "Segment Normalized Chi2 (ME -1/2); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqm11b", "Segment Normalized Chi2 (ME -1/1b); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqp11b", "Segment Normalized Chi2 (ME +1/1b); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqp12", "Segment Normalized Chi2 (ME +1/2); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqp13", "Segment Normalized Chi2 (ME +1/3); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqp11a", "Segment Normalized Chi2 (ME +1/1a); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqp21", "Segment Normalized Chi2 (ME +2/1); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqp22", "Segment Normalized Chi2 (ME +2/2); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqp31", "Segment Normalized Chi2 (ME +3/1); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqp32", "Segment Normalized Chi2 (ME +3/2); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqp41", "Segment Normalized Chi2 (ME +4/1); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSq.push_back(ibooker.book1D("hSChiSqp42", "Segment Normalized Chi2 (ME +4/2); Chi2/ndof", 110, -0.05, 10.5));
  hSChiSqProbAll = ibooker.book1D("hSChiSqProb", "Segment chi2 Probability; Probability", 110, -0.05, 1.05);
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbm42", "Segment chi2 Probability (ME -4/2); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbm41", "Segment chi2 Probability (ME -4/1); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbm32", "Segment chi2 Probability (ME -3/2); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbm31", "Segment chi2 Probability (ME -3/1); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbm22", "Segment chi2 Probability (ME -2/2); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbm21", "Segment chi2 Probability (ME -2/1); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbm11a", "Segment chi2 Probability (ME -1/1a); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbm13", "Segment chi2 Probability (ME -1/3); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbm12", "Segment chi2 Probability (ME -1/2); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbm11b", "Segment chi2 Probability (ME -1/1b); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbp11b", "Segment chi2 Probability (ME +1/1b); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbp12", "Segment chi2 Probability (ME +1/2); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbp13", "Segment chi2 Probability (ME +1/3); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbp11a", "Segment chi2 Probability (ME +1/1a); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbp21", "Segment chi2 Probability (ME +2/1); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbp22", "Segment chi2 Probability (ME +2/2); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbp31", "Segment chi2 Probability (ME +3/1); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbp32", "Segment chi2 Probability (ME +3/2); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbp41", "Segment chi2 Probability (ME +4/1); Probability", 110, -0.05, 1.05));
  hSChiSqProb.push_back(
      ibooker.book1D("hSChiSqProbp42", "Segment chi2 Probability (ME +4/2); Probability", 110, -0.05, 1.05));
  hSGlobalTheta =
      ibooker.book1D("hSGlobalTheta", "Segment Direction (Global Theta); Global Theta (radians)", 136, -0.1, 3.3);
  hSGlobalPhi = ibooker.book1D("hSGlobalPhi", "Segment Direction (Global Phi); Global Phi (radians)", 128, -3.2, 3.2);

  hSTimeDiff = ibooker.book1D("hSTimeDiff", "Anode Minus Cathode Segment Time [ns]", 50, -50, 50);
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_m42", "Anode Minus Cathode Segment Time (ME -4/2) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_m41", "Anode Minus Cathode Segment Time (ME -4/1) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_m32", "Anode Minus Cathode Segment Time (ME -3/2) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_m31", "Anode Minus Cathode Segment Time (ME -3/2) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_m22", "Anode Minus Cathode Segment Time (ME -2/2) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_m21", "Anode Minus Cathode Segment Time (ME -2/1) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_m11a", "Anode Minus Cathode Segment Time (ME -1/1a) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_m13", "Anode Minus Cathode Segment Time (ME -1/3) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_m12", "Anode Minus Cathode Segment Time (ME -1/2) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_m11b", "Anode Minus Cathode Segment Time (ME -1/1b) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_p11b", "Anode Minus Cathode Segment Time (ME +1/1b) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_p12", "Anode Minus Cathode Segment Time (ME +1/2) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_p13", "Anode Minus Cathode Segment Time (ME +1/3) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_p11a", "Anode Minus Cathode Segment Time (ME +1/1a) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_p21", "Anode Minus Cathode Segment Time (ME +2/1) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_p22", "Anode Minus Cathode Segment Time (ME +2/2) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_p31", "Anode Minus Cathode Segment Time (ME +3/1) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_p32", "Anode Minus Cathode Segment Time (ME +3/2) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_p41", "Anode Minus Cathode Segment Time (ME +4/1) [ns]", 50, -50, 50));
  hSTimeDiffByChamberType.push_back(
      ibooker.book1D("hSTimeDiff_p42", "Anode Minus Cathode Segment Time (ME +4/2) [ns]", 50, -50, 50));

  hSTimeAnode = ibooker.book1D("hSTimeAnode", "Anode Only Segment Time  [ns]", 200, -200, 200);
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_m42", "Anode Only Segment Time (ME -4/2) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_m41", "Anode Only Segment Time (ME -4/1) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_m32", "Anode Only Segment Time (ME -3/2) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_m31", "Anode Only Segment Time (ME -3/2) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_m22", "Anode Only Segment Time (ME -2/2) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_m21", "Anode Only Segment Time (ME -2/1) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_m11a", "Anode Only Segment Time (ME -1/1a) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_m13", "Anode Only Segment Time (ME -1/3) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_m12", "Anode Only Segment Time (ME -1/2) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_m11b", "Anode Only Segment Time (ME -1/1b) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_p11b", "Anode Only Segment Time (ME +1/1b) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_p12", "Anode Only Segment Time (ME +1/2) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_p13", "Anode Only Segment Time (ME +1/3) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_p11a", "Anode Only Segment Time (ME +1/1a) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_p21", "Anode Only Segment Time (ME +2/1) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_p22", "Anode Only Segment Time (ME +2/2) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_p31", "Anode Only Segment Time (ME +3/1) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_p32", "Anode Only Segment Time (ME +3/2) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_p41", "Anode Only Segment Time (ME +4/1) [ns]", 200, -200, 200));
  hSTimeAnodeByChamberType.push_back(
      ibooker.book1D("hSTimeAnode_p42", "Anode Only Segment Time (ME +4/2) [ns]", 200, -200, 200));

  hSTimeCathode = ibooker.book1D("hSTimeCathode", "Cathode Only Segment Time  [ns]", 200, -200, 200);
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_m42", "Cathode Only Segment Time (ME -4/2) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_m41", "Cathode Only Segment Time (ME -4/1) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_m32", "Cathode Only Segment Time (ME -3/2) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_m31", "Cathode Only Segment Time (ME -3/2) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_m22", "Cathode Only Segment Time (ME -2/2) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_m21", "Cathode Only Segment Time (ME -2/1) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_m11a", "Cathode Only Segment Time (ME -1/1a) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_m13", "Cathode Only Segment Time (ME -1/3) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_m12", "Cathode Only Segment Time (ME -1/2) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_m11b", "Cathode Only Segment Time (ME -1/1b) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_p11b", "Cathode Only Segment Time (ME +1/1b) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_p12", "Cathode Only Segment Time (ME +1/2) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_p13", "Cathode Only Segment Time (ME +1/3) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_p11a", "Cathode Only Segment Time (ME +1/1a) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_p21", "Cathode Only Segment Time (ME +2/1) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_p22", "Cathode Only Segment Time (ME +2/2) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_p31", "Cathode Only Segment Time (ME +3/1) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_p32", "Cathode Only Segment Time (ME +3/2) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_p41", "Cathode Only Segment Time (ME +4/1) [ns]", 200, -200, 200));
  hSTimeCathodeByChamberType.push_back(
      ibooker.book1D("hSTimeCathode_p42", "Cathode Only Segment Time (ME +4/2) [ns]", 200, -200, 200));

  hSTimeCombined = ibooker.book1D("hSTimeCombined", "Segment Time (anode+cathode times) [ns]", 200, -200, 200);
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_m42", "Segment Time (anode+cathode times) Segment Time (ME -4/2) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_m41", "Segment Time (anode+cathode times) Segment Time (ME -4/1) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_m32", "Segment Time (anode+cathode times) Segment Time (ME -3/2) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_m31", "Segment Time (anode+cathode times) Segment Time (ME -3/2) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_m22", "Segment Time (anode+cathode times) Segment Time (ME -2/2) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_m21", "Segment Time (anode+cathode times) Segment Time (ME -2/1) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_m11a", "Segment Time (anode+cathode times) Segment Time (ME -1/1a) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_m13", "Segment Time (anode+cathode times) Segment Time (ME -1/3) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_m12", "Segment Time (anode+cathode times) Segment Time (ME -1/2) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_m11b", "Segment Time (anode+cathode times) Segment Time (ME -1/1b) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_p11b", "Segment Time (anode+cathode times) Segment Time (ME +1/1b) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_p12", "Segment Time (anode+cathode times) Segment Time (ME +1/2) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_p13", "Segment Time (anode+cathode times) Segment Time (ME +1/3) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_p11a", "Segment Time (anode+cathode times) Segment Time (ME +1/1a) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_p21", "Segment Time (anode+cathode times) Segment Time (ME +2/1) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_p22", "Segment Time (anode+cathode times) Segment Time (ME +2/2) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_p31", "Segment Time (anode+cathode times) Segment Time (ME +3/1) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_p32", "Segment Time (anode+cathode times) Segment Time (ME +3/2) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_p41", "Segment Time (anode+cathode times) Segment Time (ME +4/1) [ns]", 200, -200, 200));
  hSTimeCombinedByChamberType.push_back(ibooker.book1D(
      "hSTimeCombined_p42", "Segment Time (anode+cathode times) Segment Time (ME +4/2) [ns]", 200, -200, 200));

  hSTimeDiffSerial =
      ibooker.book2D("hSTimeDiffSerial", "Anode Minus Cathode Segment Time  [ns]", 601, -0.5, 600.5, 200, -50, 50);
  hSTimeAnodeSerial =
      ibooker.book2D("hSTimeAnodeSerial", "Anode Only Segment Time  [ns]", 601, -0.5, 600.5, 200, -200, 200);
  hSTimeCathodeSerial =
      ibooker.book2D("hSTimeCathodeSerial", "Cathode Only Segment Time  [ns]", 601, -0.5, 600.5, 200, -200, 200);
  hSTimeCombinedSerial = ibooker.book2D(
      "hSTimeCombinedSerial", "Segment Time (anode+cathode times) [ns]", 601, -0.5, 600.5, 200, -200, 200);

  hSTimeVsZ = ibooker.book2D("hSTimeVsZ", "Segment Time vs. Z; [ns] vs. [cm]", 200, -1200, 1200, 200, -200, 200);
  hSTimeVsTOF =
      ibooker.book2D("hSTimeVsTOF", "Segment Time vs. Distance from IP; [ns] vs. [cm]", 180, 500, 1400, 200, -200, 200);

  // resolution
  ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/Resolution");

  hSResid.push_back(ibooker.book1D(
      "hSResidm42", "Fitted Position on Strip - Reconstructed for Layer 3 (ME -4/2); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidm41", "Fitted Position on Strip - Reconstructed for Layer 3 (ME -4/1); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidm32", "Fitted Position on Strip - Reconstructed for Layer 3 (ME -3/2); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidm31", "Fitted Position on Strip - Reconstructed for Layer 3 (ME -3/1); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidm22", "Fitted Position on Strip - Reconstructed for Layer 3 (ME -2/2); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidm21", "Fitted Position on Strip - Reconstructed for Layer 3 (ME -2/1); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidm11a", "Fitted Position on Strip - Reconstructed for Layer 3 (ME -1/1a); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidm13", "Fitted Position on Strip - Reconstructed for Layer 3 (ME -1/3); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidm12", "Fitted Position on Strip - Reconstructed for Layer 3 (ME -1/2); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidm11b", "Fitted Position on Strip - Reconstructed for Layer 3 (ME -1/1b); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidp11b", "Fitted Position on Strip - Reconstructed for Layer 3 (ME +1/1b); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidp12", "Fitted Position on Strip - Reconstructed for Layer 3 (ME +1/2); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidp13", "Fitted Position on Strip - Reconstructed for Layer 3 (ME +1/3); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidp11a", "Fitted Position on Strip - Reconstructed for Layer 3 (ME +1/1a); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidp21", "Fitted Position on Strip - Reconstructed for Layer 3 (ME +2/1); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidp22", "Fitted Position on Strip - Reconstructed for Layer 3 (ME +2/2); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidp31", "Fitted Position on Strip - Reconstructed for Layer 3 (ME +3/1); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidp32", "Fitted Position on Strip - Reconstructed for Layer 3 (ME +3/2); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidp41", "Fitted Position on Strip - Reconstructed for Layer 3 (ME +4/1); Strip Widths", 100, -0.5, 0.5));
  hSResid.push_back(ibooker.book1D(
      "hSResidp42", "Fitted Position on Strip - Reconstructed for Layer 3 (ME +4/2); Strip Widths", 100, -0.5, 0.5));

  // efficiency
  ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/Efficiency");

  //      hSSTE = ibooker.book1D("hSSTE","hSSTE",40,0.5,40.5);
  //      hRHSTE = ibooker.book1D("hRHSTE","hRHSTE",40,0.5,40.5);
  hSnum = ibooker.book1D("hSnum", "CSC w rechits in 2+ layers && segment(s)", 20, 0.5, 20.5);
  hSden = ibooker.book1D("hSden", "CSC w rechits in 2+ layers", 20, 0.5, 20.5);
  hRHnum = ibooker.book1D("hRHnum", "CSC w segment(s) && rechits in 6 layers", 20, 0.5, 20.5);
  hRHden = ibooker.book1D("hRHden", "CSC w segment(s)", 20, 0.5, 20.5);
  applyCSClabels(hSnum, EXTENDED, X);
  applyCSClabels(hSden, EXTENDED, X);
  applyCSClabels(hRHnum, EXTENDED, X);
  applyCSClabels(hRHden, EXTENDED, X);

  //      hSEff = ibooker.book1D("hSEff","Segment Efficiency",20,0.5,20.5);
  //      hRHEff = ibooker.book1D("hRHEff","recHit Efficiency",20,0.5,20.5);
  hSSTE2 = ibooker.book2D("hSSTE2", "hSSTE2", 36, 0.5, 36.5, 20, 0.5, 20.5);
  hRHSTE2 = ibooker.book2D("hRHSTE2", "hRHSTE2", 36, 0.5, 36.5, 20, 0.5, 20.5);
  hStripSTE2 = ibooker.book2D("hStripSTE2", "hStripSTE2", 36, 0.5, 36.5, 20, 0.5, 20.5);
  hWireSTE2 = ibooker.book2D("hWireSTE2", "hWireSTE2", 36, 0.5, 36.5, 20, 0.5, 20.5);
  hEffDenominator = ibooker.book2D("hEffDenominator", "hEffDenominator", 36, 0.5, 36.5, 20, 0.5, 20.5);
  //      hSEff2 = ibooker.book2D("hSEff2","Segment Efficiency 2D",36,0.5,36.5, 18, 0.5, 18.5);
  //      hRHEff2 = ibooker.book2D("hRHEff2","recHit Efficiency 2D",36,0.5,36.5, 18, 0.5, 18.5);
  //      hStripReadoutEff2 = ibooker.book2D("hStripReadoutEff2","strip readout ratio [(strip+clct+wires)/(clct+wires)] 2D",36,0.5,36.5, 20, 0.5, 20.5);
  //      hStripReadoutEff2->setAxisTitle("Chamber #");
  //      hStripEff2 = ibooker.book2D("hStripEff2","strip Efficiency 2D",36,0.5,36.5, 18, 0.5, 18.5);
  //      hWireEff2 = ibooker.book2D("hWireEff2","wire Efficiency 2D",36,0.5,36.5, 18, 0.5, 18.5);
  hSensitiveAreaEvt =
      ibooker.book2D("hSensitiveAreaEvt", "Events Passing Selection for Efficiency", 36, 0.5, 36.5, 20, 0.5, 20.5);

  // bx monitor for trigger synchronization
  ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/BXMonitor");

  hALCTgetBX = ibooker.book1D("hALCTgetBX", "ALCT position in ALCT-L1A match window [BX]", 7, -0.5, 6.5);
  //      hALCTgetBXChamberMeans = ibooker.book1D("hALCTgetBXChamberMeans","Chamber Mean ALCT position in ALCT-L1A match window [BX]",60,0,6);
  hALCTgetBXSerial =
      ibooker.book2D("hALCTgetBXSerial", "ALCT position in ALCT-L1A match window [BX]", 601, -0.5, 600.5, 7, -0.5, 6.5);
  hALCTgetBXSerial->setAxisTitle("Chamber Serial Number");
  hALCTgetBX2DNumerator = ibooker.book2D(
      "hALCTgetBX2DNumerator", "ALCT position in ALCT-L1A match window [BX] (sum)", 36, 0.5, 36.5, 20, 0.5, 20.5);
  //      hALCTgetBX2DMeans = ibooker.book2D("hALCTgetBX2DMeans","ALCT position in ALCT-L1A match window [BX]",36,0.5,36.5,20,0.5,20.5);
  hALCTgetBX2Denominator =
      ibooker.book2D("hALCTgetBX2Denominator", "Number of ALCT Digis checked", 36, 0.5, 36.5, 20, 0.5, 20.5);
  //      hALCTgetBX2DMeans->setAxisTitle("Chamber #");
  hALCTgetBX2Denominator->setAxisTitle("Chamber #");
  hALCTMatch = ibooker.book1D("hALCTMatch", "ALCT position in ALCT-CLCT match window [BX]", 7, -0.5, 6.5);
  //      hALCTMatchChamberMeans = ibooker.book1D("hALCTMatchChamberMeans","Chamber Mean ALCT position in ALCT-CLCT match window [BX]",60,0,6);
  hALCTMatchSerial = ibooker.book2D(
      "hALCTMatchSerial", "ALCT position in ALCT-CLCT match window [BX]", 601, -0.5, 600.5, 7, -0.5, 6.5);
  hALCTMatchSerial->setAxisTitle("Chamber Serial Number");
  hALCTMatch2DNumerator = ibooker.book2D(
      "hALCTMatch2DNumerator", "ALCT position in ALCT-CLCT match window [BX] (sum)", 36, 0.5, 36.5, 20, 0.5, 20.5);
  //      hALCTMatch2DMeans = ibooker.book2D("hALCTMatch2DMeans","ALCT position in ALCT-CLCT match window [BX]",36,0.5,36.5,20,0.5,20.5);
  hALCTMatch2Denominator =
      ibooker.book2D("hALCTMatch2Denominator", "Number of ALCT-CLCT matches checked", 36, 0.5, 36.5, 20, 0.5, 20.5);
  //      hALCTMatch2DMeans->setAxisTitle("Chamber #");
  hALCTMatch2Denominator->setAxisTitle("Chamber #");
  hCLCTL1A = ibooker.book1D("hCLCTL1A", "L1A - CLCTpreTrigger at TMB [BX]", 40, 149.5, 189.5);
  //      hCLCTL1AChamberMeans = ibooker.book1D("hCLCTL1AChamberMeans","Chamber Mean L1A - CLCTpreTrigger at TMB [BX]",90,150,159);
  hCLCTL1ASerial =
      ibooker.book2D("hCLCTL1ASerial", "L1A - CLCTpreTrigger at TMB [BX]", 601, -0.5, 600.5, 40, 149.5, 189.5);
  hCLCTL1ASerial->setAxisTitle("Chamber Serial Number");
  hCLCTL1A2DNumerator =
      ibooker.book2D("hCLCTL1A2DNumerator", "L1A - CLCTpreTrigger at TMB [BX] (sum)", 36, 0.5, 36.5, 20, 0.5, 20.5);
  //      hCLCTL1A2DMeans = ibooker.book2D("hCLCTL1A2DMeans","L1A - CLCTpreTrigger at TMB [BX]",36,0.5,36.5,20,0.5,20.5);
  hCLCTL1A2Denominator =
      ibooker.book2D("hCLCTL1A2Denominator", "Number of TMB CLCTs checked", 36, 0.5, 36.5, 20, 0.5, 20.5);

  // labels
  applyCSClabels(hOWiresAndCLCT, EXTENDED, Y);
  applyCSClabels(hOWires, EXTENDED, Y);
  applyCSClabels(hOStrips, EXTENDED, Y);
  applyCSClabels(hOStripsAndWiresAndCLCT, EXTENDED, Y);
  applyCSClabels(hORecHits, EXTENDED, Y);
  applyCSClabels(hOSegments, EXTENDED, Y);
  //      applyCSClabels(hSEff, EXTENDED, X);
  //      applyCSClabels(hRHEff, EXTENDED, X);
  //      applyCSClabels(hSEff2, SMALL, Y);
  applyCSClabels(hSSTE2, EXTENDED, Y);
  applyCSClabels(hEffDenominator, EXTENDED, Y);
  //      applyCSClabels(hRHEff2, SMALL, Y);
  applyCSClabels(hRHSTE2, EXTENDED, Y);
  //      applyCSClabels(hStripReadoutEff2, EXTENDED, Y);
  //      applyCSClabels(hStripEff2, SMALL, Y);
  applyCSClabels(hStripSTE2, EXTENDED, Y);
  //      applyCSClabels(hWireEff2, SMALL, Y);
  applyCSClabels(hWireSTE2, EXTENDED, Y);
  applyCSClabels(hSensitiveAreaEvt, EXTENDED, Y);
  //      applyCSClabels(hALCTgetBX2DMeans, EXTENDED, Y);
  applyCSClabels(hALCTgetBX2Denominator, EXTENDED, Y);
  //      applyCSClabels(hALCTMatch2DMeans, EXTENDED, Y);
  applyCSClabels(hALCTMatch2Denominator, EXTENDED, Y);
  //      applyCSClabels(hCLCTL1A2DMeans, EXTENDED, Y);
  applyCSClabels(hCLCTL1A2Denominator, EXTENDED, Y);
}

chamberSerial()

int CSCOfflineMonitor::chamberSerial ( CSCDetId  id )

private

Definition at line 2118 of file CSCOfflineMonitor.cc.

Referenced by doBXMonitor(), doOccupancies(), and doSegments().

                                                {
  int st = id.station();
  int ri = id.ring();
  int ch = id.chamber();
  int ec = id.endcap();
  int kSerial = ch;
  if (st == 1 && ri == 1)
    kSerial = ch;
  if (st == 1 && ri == 2)
    kSerial = ch + 36;
  if (st == 1 && ri == 3)
    kSerial = ch + 72;
  if (st == 1 && ri == 4)
    kSerial = ch;
  if (st == 2 && ri == 1)
    kSerial = ch + 108;
  if (st == 2 && ri == 2)
    kSerial = ch + 126;
  if (st == 3 && ri == 1)
    kSerial = ch + 162;
  if (st == 3 && ri == 2)
    kSerial = ch + 180;
  if (st == 4 && ri == 1)
    kSerial = ch + 216;
  if (st == 4 && ri == 2)
    kSerial = ch + 234;  // from 2014
  if (ec == 2)
    kSerial = kSerial + 300;
  return kSerial;
}

doBXMonitor()

void CSCOfflineMonitor::doBXMonitor ( edm::Handle< CSCALCTDigiCollection >  alcts, edm::Handle< CSCCLCTDigiCollection >  clcts, const edm::Event &  event, const edm::EventSetup &  eventSetup  )

private

uncomment this for regional unpacking if (id!=SOME_ID) continue;











Take a reference to this FED's data

if fed has data then unpack it

get a pointer to data and pass it to constructor for unpacking

get a reference to dduData

set default detid to that for E=+z, S=1, R=1, C=1, L=1

skip the DDU if its data has serious errors define a mask for serious errors





get a reference to chamber data

first process chamber-wide digis such as LCT

default value for all digis not related to cfebs

layer=0 flags entire chamber

check alct data integrity

check tmb data integrity

Definition at line 1784 of file CSCOfflineMonitor.cc.

References CSCTMBHeader::ALCTMatchTime(), CSCTMBHeader::BXNCount(), CSCDetId::chamber(), chamberSerial(), RPCNoise_example::check, CSCDCCExaminer::check(), CSCDCCExaminer::crcALCT(), CSCDCCExaminer::crcCFEB(), CSCDCCExaminer::crcTMB(), FEDRawData::data(), data, CSCDCCEventData::dduData(), CSCCrateMap::detId(), CSCDCCExaminer::errors(), options_cfi::eventSetup, FEDRawDataCollection::FEDData(), dqm::impl::MonitorElement::Fill(), hALCTgetBX, hALCTgetBX2Denominator, hALCTgetBX2DNumerator, hALCTgetBXSerial, hALCTMatch, hALCTMatch2Denominator, hALCTMatch2DNumerator, hALCTMatchSerial, hCLCTL1A, hCLCTL1A2Denominator, hCLCTL1A2DNumerator, hCLCTL1ASerial, hcrateToken_, mps_fire::i, triggerObjects_cff::id, dqmiolumiharvest::j, phase1PixelTopology::layer, LogTrace, FEDNumbering::MAXCSCDDUFEDID, FEDNumbering::MAXCSCFEDID, FEDNumbering::MINCSCDDUFEDID, FEDNumbering::MINCSCFEDID, edm::ESHandle< T >::product(), FastTimerService_cff::range, rd_token, CSCDCCExaminer::setMask(), FEDRawData::size(), and typeIndex().

Referenced by analyze().

                                                                     {
  // Loop over ALCTDigis

  for (CSCALCTDigiCollection::DigiRangeIterator j = alcts->begin(); j != alcts->end(); j++) {
    const CSCDetId& idALCT = (*j).first;
    const CSCALCTDigiCollection::Range& range = (*j).second;
    for (CSCALCTDigiCollection::const_iterator digiIt = range.first; digiIt != range.second; ++digiIt) {
      // Valid digi in the chamber (or in neighbouring chamber)
      if ((*digiIt).isValid()) {
        hALCTgetBX->Fill((*digiIt).getBX());
        hALCTgetBXSerial->Fill(chamberSerial(idALCT), (*digiIt).getBX());
        hALCTgetBX2DNumerator->Fill(idALCT.chamber(), typeIndex(idALCT, 2), (*digiIt).getBX());
        hALCTgetBX2Denominator->Fill(idALCT.chamber(), typeIndex(idALCT, 2));
      }
    }
  }  // end ALCT Digi loop

  // Loop over raw data to get TMBHeader information
  // Taking code from EventFilter/CSCRawToDigis/CSCDCCUnpacker.cc
  edm::ESHandle<CSCCrateMap> hcrate;

  hcrate = eventSetup.getHandle(hcrateToken_);

  const CSCCrateMap* pcrate = hcrate.product();

  // Try to get raw data
  edm::Handle<FEDRawDataCollection> rawdata;
  if (!(event.getByToken(rd_token, rawdata))) {
    edm::LogWarning("CSCOfflineMonitor") << " FEDRawDataCollection not available";
    return;
  }

  bool goodEvent = false;
  unsigned long dccBinCheckMask = 0x06080016;
  unsigned int examinerMask = 0x1FEBF3F6;
  unsigned int errorMask = 0x0;

  // For new CSC readout layout, which doesn't include DCCs need to loop over DDU FED IDs.
  // DCC IDs are included for backward compatibility with old data
  std::vector<unsigned int> cscFEDids;

  for (unsigned int id = FEDNumbering::MINCSCFEDID; id <= FEDNumbering::MAXCSCFEDID; ++id)  // loop over DCCs
  {
    cscFEDids.push_back(id);
  }

  for (unsigned int id = FEDNumbering::MINCSCDDUFEDID; id <= FEDNumbering::MAXCSCDDUFEDID; ++id)  // loop over DDUs
  {
    cscFEDids.push_back(id);
  }

  for (unsigned int i = 0; i < cscFEDids.size(); i++)  // loop over all CSC FEDs (DCCs and DDUs)
  {
    unsigned int id = cscFEDids[i];
    bool isDDU_FED = ((id >= FEDNumbering::MINCSCDDUFEDID) && (id <= FEDNumbering::MAXCSCDDUFEDID)) ? true : false;


    const FEDRawData& fedData = rawdata->FEDData(id);
    unsigned long length = fedData.size();

    if (length >= 32) {  
      CSCDCCExaminer* examiner = nullptr;
      std::stringstream examiner_out, examiner_err;
      goodEvent = true;
      examiner = new CSCDCCExaminer();
      if (examinerMask & 0x40000)
        examiner->crcCFEB(true);
      if (examinerMask & 0x8000)
        examiner->crcTMB(true);
      if (examinerMask & 0x0400)
        examiner->crcALCT(true);
      examiner->setMask(examinerMask);
      const short unsigned int* data = (short unsigned int*)fedData.data();

      int res = examiner->check(data, long(fedData.size() / 2));
      if (res < 0) {
        goodEvent = false;
      } else {
        goodEvent = !(examiner->errors() & dccBinCheckMask);
      }

      if (goodEvent) {

        CSCDCCExaminer* ptrExaminer = examiner;

        std::vector<CSCDDUEventData> fed_Data;
        std::vector<CSCDDUEventData>* ptr_fedData = &fed_Data;

        if (isDDU_FED)  // Use new DDU FED readout mode
        {
          CSCDDUEventData single_dduData((short unsigned int*)fedData.data(), ptrExaminer);
          fed_Data.push_back(single_dduData);

        } else  // Use old DCC FED readout mode
        {
          CSCDCCEventData dccData((short unsigned int*)fedData.data(), ptrExaminer);
          fed_Data = dccData.dduData();
        }

        const std::vector<CSCDDUEventData>& dduData = *ptr_fedData;

        CSCDetId layer(1, 1, 1, 1, 1);
        for (unsigned int iDDU = 0; iDDU < dduData.size(); ++iDDU) {  // loop over DDUs
          if (dduData[iDDU].trailer().errorstat() & errorMask) {
            LogTrace("CSCDCCUnpacker|CSCRawToDigi") << "DDU# " << iDDU << " has serious error - no digis unpacked! "
                                                    << std::hex << dduData[iDDU].trailer().errorstat();
            continue;  // to next iteration of DDU loop
          }

          const std::vector<CSCEventData>& cscData = dduData[iDDU].cscData();

          for (unsigned int iCSC = 0; iCSC < cscData.size(); ++iCSC) {  // loop over CSCs

            int vmecrate = cscData[iCSC].dmbHeader()->crateID();
            int dmb = cscData[iCSC].dmbHeader()->dmbID();

            int icfeb = 0;   
            int ilayer = 0;  

            if ((vmecrate >= 1) && (vmecrate <= 60) && (dmb >= 1) && (dmb <= 10) && (dmb != 6)) {
              layer = pcrate->detId(vmecrate, dmb, icfeb, ilayer);
            } else {
              LogTrace("CSCOfflineMonitor") << " detID input out of range!!! ";
              LogTrace("CSCOfflineMonitor") << " skipping chamber vme= " << vmecrate << " dmb= " << dmb;
              continue;  // to next iteration of iCSC loop
            }

            int nalct = cscData[iCSC].dmbHeader()->nalct();
            bool goodALCT = false;
            //if (nalct&&(cscData[iCSC].dataPresent>>6&0x1)==1) {
            if (nalct && cscData[iCSC].alctHeader()) {
              if (cscData[iCSC].alctHeader()->check()) {
                goodALCT = true;
              }
            }

            int nclct = cscData[iCSC].dmbHeader()->nclct();
            bool goodTMB = false;
            if (nclct && cscData[iCSC].tmbData()) {
              if (cscData[iCSC].tmbHeader()->check()) {
                if (cscData[iCSC].comparatorData()->check())
                  goodTMB = true;
              }
            }

            if (goodTMB && goodALCT) {
              const CSCTMBHeader* tmbHead = cscData[iCSC].tmbHeader();
              std::vector<CSCCLCTDigi> clcts = cscData[iCSC].tmbHeader()->CLCTDigis(layer.rawId());
              if (clcts.empty() || !(clcts[0].isValid()))
                continue;
              // Check if the CLCT was in ME11a (ring 4)
              if (layer.station() == 1 && layer.ring() == 1 && clcts[0].getKeyStrip() > 128) {
                layer = CSCDetId(layer.endcap(), layer.station(), 4, layer.chamber());
              }
              hALCTMatch->Fill(tmbHead->ALCTMatchTime());
              hALCTMatchSerial->Fill(chamberSerial(layer), tmbHead->ALCTMatchTime());
              // Only fill big 2D display if ALCTMatchTime !=6, since this bin is polluted by the CLCT only triggers
              // One will have to look at the serial plots to see if the are a lot of entries here
              if (tmbHead->ALCTMatchTime() != 6) {
                hALCTMatch2DNumerator->Fill(layer.chamber(), typeIndex(layer, 2), tmbHead->ALCTMatchTime());
                hALCTMatch2Denominator->Fill(layer.chamber(), typeIndex(layer, 2));
              }

              int TMB_CLCTpre_rel_L1A = tmbHead->BXNCount() - clcts[0].getFullBX();
              if (TMB_CLCTpre_rel_L1A > 3563)
                TMB_CLCTpre_rel_L1A = TMB_CLCTpre_rel_L1A - 3564;
              if (TMB_CLCTpre_rel_L1A < 0)
                TMB_CLCTpre_rel_L1A = TMB_CLCTpre_rel_L1A + 3564;

              hCLCTL1A->Fill(TMB_CLCTpre_rel_L1A);
              hCLCTL1ASerial->Fill(chamberSerial(layer), TMB_CLCTpre_rel_L1A);
              hCLCTL1A2DNumerator->Fill(layer.chamber(), typeIndex(layer, 2), TMB_CLCTpre_rel_L1A);
              hCLCTL1A2Denominator->Fill(layer.chamber(), typeIndex(layer, 2));

            }  // end if goodTMB and goodALCT
          }    // end loop CSCData
        }      // end loop DDU
      }        // end if good event
      if (examiner != nullptr)
        delete examiner;
    }  // end if non-zero fed data
  }    // end DCC loop for NON-REFERENCE

  return;
}

doEfficiencies()

void CSCOfflineMonitor::doEfficiencies ( edm::Handle< CSCWireDigiCollection >  wires, edm::Handle< CSCStripDigiCollection >  strips, edm::Handle< CSCRecHit2DCollection >  recHits, edm::Handle< CSCSegmentCollection >  cscSegments, edm::ESHandle< CSCGeometry >  cscGeom  )

private

Definition at line 1492 of file CSCOfflineMonitor.cc.

References newFWLiteAna::bin, CSCDetId::chamber(), CSCGeometry::chamber(), CSCGeometry::chambers(), CSCChamberSpecs::chamberType(), dtChamberEfficiency_cfi::cscSegments, change_name::diff, CSCDetId::endcap(), extrapolate1D(), dqm::impl::MonitorElement::Fill(), first, dqmMemoryStats::float, cms::cuda::for(), CSCLayer::geometry(), hEffDenominator, hRHden, hRHnum, hRHSTE2, hSden, hSensitiveAreaEvt, hSnum, hSSTE2, hStripSTE2, hWireSTE2, CSCDetId::iChamberType(), CSCChamber::id(), createfilelist::int, CSCChamber::layer(), CSCDetId::layer(), lineParametrization(), CSCSegment::localDirection(), CSCSegment::localPosition(), TrapezoidalPlaneBounds::parameters(), FastTrackerRecHitMaskProducer_cfi::recHits, CSCDetId::ring(), CSCChamber::specs(), CSCDetId::station(), DigiDM_cff::strips, remoteMonitoring_LASER_era2018_cfg::threshold, GeomDet::toGlobal(), GeomDet::toLocal(), parallelization::uint, mps_merge::weight, DigiDM_cff::wires, withinSensitiveRegion(), PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), PV3DBase< T, PVType, FrameType >::z(), and CSCDetId::zendcap().

Referenced by analyze().

                                                                         {
  bool allWires[2][4][4][36][6];
  bool allStrips[2][4][4][36][6];
  bool AllRecHits[2][4][4][36][6];
  bool AllSegments[2][4][4][36];

  //bool MultiSegments[2][4][4][36];
  for (int iE = 0; iE < 2; iE++) {
    for (int iS = 0; iS < 4; iS++) {
      for (int iR = 0; iR < 4; iR++) {
        for (int iC = 0; iC < 36; iC++) {
          AllSegments[iE][iS][iR][iC] = false;
          //MultiSegments[iE][iS][iR][iC] = false;
          for (int iL = 0; iL < 6; iL++) {
            allWires[iE][iS][iR][iC][iL] = false;
            allStrips[iE][iS][iR][iC][iL] = false;
            AllRecHits[iE][iS][iR][iC][iL] = false;
          }
        }
      }
    }
  }

  // Wires
  for (CSCWireDigiCollection::DigiRangeIterator dWDiter = wires->begin(); dWDiter != wires->end(); dWDiter++) {
    CSCDetId idrec = (CSCDetId)(*dWDiter).first;
    std::vector<CSCWireDigi>::const_iterator wireIter = (*dWDiter).second.first;
    std::vector<CSCWireDigi>::const_iterator lWire = (*dWDiter).second.second;
    for (; wireIter != lWire; ++wireIter) {
      allWires[idrec.endcap() - 1][idrec.station() - 1][idrec.ring() - 1][idrec.chamber() - 1][idrec.layer() - 1] =
          true;
      break;
    }
  }

  //---- STRIPS
  for (CSCStripDigiCollection::DigiRangeIterator dSDiter = strips->begin(); dSDiter != strips->end(); dSDiter++) {
    CSCDetId idrec = (CSCDetId)(*dSDiter).first;
    std::vector<CSCStripDigi>::const_iterator stripIter = (*dSDiter).second.first;
    std::vector<CSCStripDigi>::const_iterator lStrip = (*dSDiter).second.second;
    for (; stripIter != lStrip; ++stripIter) {
      std::vector<int> myADCVals = stripIter->getADCCounts();
      bool thisStripFired = false;
      float thisPedestal = 0.5 * (float)(myADCVals[0] + myADCVals[1]);
      float threshold = 13.3;
      float diff = 0.;
      for (unsigned int iCount = 0; iCount < myADCVals.size(); iCount++) {
        diff = (float)myADCVals[iCount] - thisPedestal;
        if (diff > threshold) {
          thisStripFired = true;
          break;
        }
      }
      if (thisStripFired) {
        allStrips[idrec.endcap() - 1][idrec.station() - 1][idrec.ring() - 1][idrec.chamber() - 1][idrec.layer() - 1] =
            true;
        break;
      }
    }
  }

  // Rechits
  for (CSCRecHit2DCollection::const_iterator recEffIt = recHits->begin(); recEffIt != recHits->end(); recEffIt++) {
    //CSCDetId idrec = (CSCDetId)(*recIt).cscDetId();
    CSCDetId idrec = (CSCDetId)(*recEffIt).cscDetId();
    AllRecHits[idrec.endcap() - 1][idrec.station() - 1][idrec.ring() - 1][idrec.chamber() - 1][idrec.layer() - 1] =
        true;
  }

  std::vector<uint> seg_ME2(2, 0);
  std::vector<uint> seg_ME3(2, 0);
  std::vector<pair<CSCDetId, CSCSegment> > theSegments(4);
  // Segments
  for (CSCSegmentCollection::const_iterator segEffIt = cscSegments->begin(); segEffIt != cscSegments->end();
       segEffIt++) {
    CSCDetId idseg = (CSCDetId)(*segEffIt).cscDetId();
    //if(AllSegments[idrec.endcap() -1][idrec.station() -1][idrec.ring() -1][idrec.chamber()]){
    //MultiSegments[idrec.endcap() -1][idrec.station() -1][idrec.ring() -1][idrec.chamber()] = true;
    //}
    AllSegments[idseg.endcap() - 1][idseg.station() - 1][idseg.ring() - 1][idseg.chamber() - 1] = true;
    // "Intrinsic" efficiency measurement relies on "good" segment extrapolation - we need the pre-selection below
    // station 2 "good" segment will be used for testing efficiencies in ME1 and ME3
    // station 3 "good" segment will be used for testing efficiencies in ME2 and ME4
    if (2 == idseg.station() || 3 == idseg.station()) {
      uint seg_tmp;
      if (2 == idseg.station()) {
        ++seg_ME2[idseg.endcap() - 1];
        seg_tmp = seg_ME2[idseg.endcap() - 1];
      } else {
        ++seg_ME3[idseg.endcap() - 1];
        seg_tmp = seg_ME3[idseg.endcap() - 1];
      }
      // is the segment good
      if (1 == seg_tmp && 6 == (*segEffIt).nRecHits() && (*segEffIt).chi2() / (*segEffIt).degreesOfFreedom() < 3.) {
        pair<CSCDetId, CSCSegment> specSeg = make_pair((CSCDetId)(*segEffIt).cscDetId(), *segEffIt);
        theSegments[2 * (idseg.endcap() - 1) + (idseg.station() - 2)] = specSeg;
      }
    }
    /*
    if(2==idseg.station()){
    ++seg_ME2[idseg.endcap() -1];
       if(1==seg_ME2[idseg.endcap() -1] && 6==(*segEffIt).nRecHits() && (*segEffIt).chi2()/(*segEffIt).degreesOfFreedom()<3.){
           pair <CSCDetId, CSCSegment> specSeg = make_pair( (CSCDetId)(*segEffIt).cscDetId(),*segEffIt);
           theSegments[2*(idseg.endcap()-1)+(idseg.station() -2)] = specSeg;
       }
    }
    else if(3==idseg.station()){
    ++seg_ME3[idseg.endcap() -1];
    if(1==seg_ME3[idseg.endcap() -1] && 6==(*segEffIt).nRecHits() && (*segEffIt).chi2()/(*segEffIt).degreesOfFreedom()<3.){
         pair <CSCDetId, CSCSegment> specSeg = make_pair( (CSCDetId)(*segEffIt).cscDetId(),*segEffIt);
     theSegments[2*(idseg.endcap()-1)+(idseg.station() -2)] = specSeg;
       }
    }
    */
  }
  // Simple efficiency calculations
  for (int iE = 0; iE < 2; iE++) {
    for (int iS = 0; iS < 4; iS++) {
      for (int iR = 0; iR < 4; iR++) {
        for (int iC = 0; iC < 36; iC++) {
          int NumberOfLayers = 0;
          for (int iL = 0; iL < 6; iL++) {
            if (AllRecHits[iE][iS][iR][iC][iL]) {
              NumberOfLayers++;
            }
          }

          // set bin = 1-10 for ME-42, ME-41,...ME-11B, ME-11A,
          //           11-20 for ME+11A, ME+11B, ... ME+41, ME+42
          int bin = CSCDetId::iChamberType(iS + 1, iR + 1);  // 1-10 for ME11A...ME42
          if (iE > 0) {                                      // in this loop iE=1 is -z endcap
            bin = 11 - bin;
          } else {  // in this loop iE=0 is +z endcap
            bin += 10;
          }

          if (NumberOfLayers > 1) {
            //if(!(MultiSegments[iE][iS][iR][iC])){
            if (AllSegments[iE][iS][iR][iC]) {
              //---- Efficient segment evenents
              hSnum->Fill(bin);
            }
            //---- All segment events (normalization)
            hSden->Fill(bin);
            //}
          }
          if (AllSegments[iE][iS][iR][iC]) {
            if (NumberOfLayers == 6) {
              //---- Efficient rechit events
              hRHnum->Fill(bin);
              ;
            }
            //---- All rechit events (normalization)
            hRHden->Fill(bin);
            ;
          }
        }
      }
    }
  }

  // pick a segment only if there are no others in the station
  std::vector<pair<CSCDetId, CSCSegment>*> theSeg;
  if (1 == seg_ME2[0])
    theSeg.push_back(&theSegments[0]);
  if (1 == seg_ME3[0])
    theSeg.push_back(&theSegments[1]);
  if (1 == seg_ME2[1])
    theSeg.push_back(&theSegments[2]);
  if (1 == seg_ME3[1])
    theSeg.push_back(&theSegments[3]);

  if (!theSeg.empty()) {
    std::map<int, GlobalPoint> extrapolatedPoint;
    std::map<int, GlobalPoint>::iterator it;
    const CSCGeometry::ChamberContainer& ChamberContainer = cscGeom->chambers();
    // Pick which chamber with which segment to test
    for (unsigned int nCh = 0; nCh < ChamberContainer.size(); nCh++) {
      const CSCChamber* cscchamber = ChamberContainer[nCh];
      pair<CSCDetId, CSCSegment>* thisSegment = nullptr;
      for (uint iSeg = 0; iSeg < theSeg.size(); ++iSeg) {
        if (cscchamber->id().endcap() == theSeg[iSeg]->first.endcap()) {
          if (1 == cscchamber->id().station() || 3 == cscchamber->id().station()) {
            if (2 == theSeg[iSeg]->first.station()) {
              thisSegment = theSeg[iSeg];
            }
          } else if (2 == cscchamber->id().station() || 4 == cscchamber->id().station()) {
            if (3 == theSeg[iSeg]->first.station()) {
              thisSegment = theSeg[iSeg];
            }
          }
        }
      }
      // this chamber is to be tested with thisSegment
      if (thisSegment) {
        CSCSegment* seg = &(thisSegment->second);
        const CSCChamber* segChamber = cscGeom->chamber(thisSegment->first);
        LocalPoint localCenter(0., 0., 0);
        GlobalPoint cscchamberCenter = cscchamber->toGlobal(localCenter);
        // try to save some time (extrapolate a segment to a certain position only once)
        it = extrapolatedPoint.find(int(cscchamberCenter.z()));
        if (it == extrapolatedPoint.end()) {
          GlobalPoint segPos = segChamber->toGlobal(seg->localPosition());
          GlobalVector segDir = segChamber->toGlobal(seg->localDirection());
          double paramaterLine = lineParametrization(segPos.z(), cscchamberCenter.z(), segDir.z());
          double xExtrapolated = extrapolate1D(segPos.x(), segDir.x(), paramaterLine);
          double yExtrapolated = extrapolate1D(segPos.y(), segDir.y(), paramaterLine);
          GlobalPoint globP(xExtrapolated, yExtrapolated, cscchamberCenter.z());
          extrapolatedPoint[int(cscchamberCenter.z())] = globP;
        }
        // Where does the extrapolated point lie in the (tested) chamber local frame? Here:
        LocalPoint extrapolatedPointLocal = cscchamber->toLocal(extrapolatedPoint[int(cscchamberCenter.z())]);
        const CSCLayer* layer_p = cscchamber->layer(1);  //layer 1
        const CSCLayerGeometry* layerGeom = layer_p->geometry();
        const std::array<const float, 4>& layerBounds = layerGeom->parameters();
        float shiftFromEdge = 15.;  //cm
        float shiftFromDeadZone = 10.;
        // is the extrapolated point within a sensitive region
        bool pass = withinSensitiveRegion(extrapolatedPointLocal,
                                          layerBounds,
                                          cscchamber->id().station(),
                                          cscchamber->id().ring(),
                                          shiftFromEdge,
                                          shiftFromDeadZone);
        if (pass) {  // the extrapolation point of the segment lies within sensitive region of that chamber
          // how many rechit layers are there in the chamber?
          // 0 - maybe the muon died or is deflected at large angle? do not use that case
          // 1 - could be noise...
          // 2 or more - this is promissing; this is our definition of a reliable signal; use it below
          // is other definition better?
          int nRHLayers = 0;
          for (int iL = 0; iL < 6; ++iL) {
            if (AllRecHits[cscchamber->id().endcap() - 1][cscchamber->id().station() - 1][cscchamber->id().ring() - 1]
                          [cscchamber->id().chamber() - 1][iL]) {
              ++nRHLayers;
            }
          }

          // set verticalScale to 1-10 for ME-42...ME-11A,
          //                     11-20 for ME+11A...ME+42
          float verticalScale =
              9. + cscchamber->id().endcap() + (cscchamber->specs()->chamberType()) * (cscchamber->id().zendcap());

          hSensitiveAreaEvt->Fill(float(cscchamber->id().chamber()), verticalScale);
          if (nRHLayers > 1) {  // this chamber contains a reliable signal
            // this is the denominator for all efficiencies
            hEffDenominator->Fill(float(cscchamber->id().chamber()), verticalScale);
            // Segment efficiency
            if (AllSegments[cscchamber->id().endcap() - 1][cscchamber->id().station() - 1][cscchamber->id().ring() - 1]
                           [cscchamber->id().chamber() - 1]) {
              hSSTE2->Fill(float(cscchamber->id().chamber()), float(verticalScale));
            }

            for (int iL = 0; iL < 6; ++iL) {
              float weight = 1. / 6.;
              // should account for the weight in the efficiency...
              // Rechit efficiency
              if (AllRecHits[cscchamber->id().endcap() - 1][cscchamber->id().station() - 1][cscchamber->id().ring() - 1]
                            [cscchamber->id().chamber() - 1][iL]) {
                hRHSTE2->Fill(float(cscchamber->id().chamber()), float(verticalScale), weight);
              }
              // Wire efficiency
              if (allWires[cscchamber->id().endcap() - 1][cscchamber->id().station() - 1][cscchamber->id().ring() - 1]
                          [cscchamber->id().chamber() - 1][iL]) {
                // one shold account for the weight in the efficiency...
                hWireSTE2->Fill(float(cscchamber->id().chamber()), float(verticalScale), weight);
              }
              // Strip efficiency
              if (allStrips[cscchamber->id().endcap() - 1][cscchamber->id().station() - 1][cscchamber->id().ring() - 1]
                           [cscchamber->id().chamber() - 1][iL]) {
                // one shold account for the weight in the efficiency...
                hStripSTE2->Fill(float(cscchamber->id().chamber()), float(verticalScale), weight);
              }
            }
          }
        }
      }
    }
  }
  //
}

doOccupancies()

void CSCOfflineMonitor::doOccupancies ( edm::Handle< CSCStripDigiCollection >  strips, edm::Handle< CSCWireDigiCollection >  wires, edm::Handle< CSCRecHit2DCollection >  recHits, edm::Handle< CSCSegmentCollection >  cscSegments, edm::Handle< CSCCLCTDigiCollection >  clcts  )

private

Definition at line 866 of file CSCOfflineMonitor.cc.

References c, CSCDetId::chamber(), chamberSerial(), dtChamberEfficiency_cfi::cscSegments, change_name::diff, MillePedeFileConverter_cfg::e, CSCDetId::endcap(), dqm::impl::MonitorElement::Fill(), dqmMemoryStats::float, hCSCOccupancy, hORecHits, hORecHitsSerial, hOSegments, hOSegmentsSerial, hOStrips, hOStripsAndWiresAndCLCT, hOStripSerial, hOWires, hOWiresAndCLCT, hOWireSerial, dqmiolumiharvest::j, alignCSCRings::r, FastTimerService_cff::range, FastTrackerRecHitMaskProducer_cfi::recHits, CSCDetId::ring(), alignCSCRings::s, CSCDetId::station(), DigiDM_cff::strips, remoteMonitoring_LASER_era2018_cfg::threshold, typeIndex(), and DigiDM_cff::wires.

Referenced by analyze().

                                                                              {
  bool clcto[2][4][4][36];
  bool wireo[2][4][4][36];
  bool stripo[2][4][4][36];
  bool rechito[2][4][4][36];
  bool segmento[2][4][4][36];

  bool hasWires = false;
  bool hasStrips = false;
  bool hasRecHits = false;
  bool hasSegments = false;

  for (int e = 0; e < 2; e++) {
    for (int s = 0; s < 4; s++) {
      for (int r = 0; r < 4; r++) {
        for (int c = 0; c < 36; c++) {
          clcto[e][s][r][c] = false;
          wireo[e][s][r][c] = false;
          stripo[e][s][r][c] = false;
          rechito[e][s][r][c] = false;
          segmento[e][s][r][c] = false;
        }
      }
    }
  }

  //clcts
  for (CSCCLCTDigiCollection::DigiRangeIterator j = clcts->begin(); j != clcts->end(); j++) {
    CSCDetId id = (CSCDetId)(*j).first;
    int kEndcap = id.endcap();
    int kRing = id.ring();
    int kStation = id.station();
    int kChamber = id.chamber();
    const CSCCLCTDigiCollection::Range& range = (*j).second;
    for (CSCCLCTDigiCollection::const_iterator digiIt = range.first; digiIt != range.second; ++digiIt) {
      // Valid digi in the chamber (or in neighbouring chamber)
      if ((*digiIt).isValid()) {
        //Check whether this CLCT came from ME11a
        if (kStation == 1 && kRing == 1 && (*digiIt).getKeyStrip() > 128)
          kRing = 4;
        clcto[kEndcap - 1][kStation - 1][kRing - 1][kChamber - 1] = true;
      }
    }
  }

  //wires
  for (CSCWireDigiCollection::DigiRangeIterator wi = wires->begin(); wi != wires->end(); wi++) {
    CSCDetId id = (CSCDetId)(*wi).first;
    int kEndcap = id.endcap();
    int kRing = id.ring();
    int kStation = id.station();
    int kChamber = id.chamber();
    std::vector<CSCWireDigi>::const_iterator wireIt = (*wi).second.first;
    std::vector<CSCWireDigi>::const_iterator lastWire = (*wi).second.second;
    for (; wireIt != lastWire; ++wireIt) {
      if (!wireo[kEndcap - 1][kStation - 1][kRing - 1][kChamber - 1]) {
        wireo[kEndcap - 1][kStation - 1][kRing - 1][kChamber - 1] = true;
        hOWires->Fill(kChamber, typeIndex(id, 2));
        hOWireSerial->Fill(chamberSerial(id));
        hasWires = true;
        if (clcto[kEndcap - 1][kStation - 1][kRing - 1][kChamber - 1])
          hOWiresAndCLCT->Fill(kChamber, typeIndex(id, 2));
        //Also check for a CLCT in ME11a if you're in ME11 already
        if (kStation == 1 && kRing == 1 && clcto[kEndcap - 1][kStation - 1][3][kChamber - 1]) {
          CSCDetId idME11a = CSCDetId(kEndcap, kStation, 4, kChamber);
          hOWiresAndCLCT->Fill(kChamber, typeIndex(idME11a, 2));
        }
      }
    }  //end for loop
  }

  //strips
  for (CSCStripDigiCollection::DigiRangeIterator si = strips->begin(); si != strips->end(); si++) {
    CSCDetId id = (CSCDetId)(*si).first;
    int kEndcap = id.endcap();
    int kRing = id.ring();
    int kStation = id.station();
    int kChamber = id.chamber();
    std::vector<CSCStripDigi>::const_iterator stripIt = (*si).second.first;
    std::vector<CSCStripDigi>::const_iterator lastStrip = (*si).second.second;
    for (; stripIt != lastStrip; ++stripIt) {
      std::vector<int> myADCVals = stripIt->getADCCounts();
      bool thisStripFired = false;
      float thisPedestal = 0.5 * (float)(myADCVals[0] + myADCVals[1]);
      float threshold = 13.3;
      float diff = 0.;
      for (unsigned int iCount = 0; iCount < myADCVals.size(); iCount++) {
        diff = (float)myADCVals[iCount] - thisPedestal;
        if (diff > threshold) {
          thisStripFired = true;
        }
      }
      if (thisStripFired) {
        if (!stripo[kEndcap - 1][kStation - 1][kRing - 1][kChamber - 1]) {
          stripo[kEndcap - 1][kStation - 1][kRing - 1][kChamber - 1] = true;
          hOStrips->Fill(kChamber, typeIndex(id, 2));
          hOStripSerial->Fill(chamberSerial(id));
          hasStrips = true;
          if (clcto[kEndcap - 1][kStation - 1][kRing - 1][kChamber - 1]) {
            // check if there is a wire digi in this chamber too
            // for ME 1/4 check for a wire in ME 1/1
            if (wireo[kEndcap - 1][kStation - 1][kRing - 1][kChamber - 1] ||
                (kRing == 4 && wireo[kEndcap - 1][kStation - 1][0][kChamber - 1])) {
              hOStripsAndWiresAndCLCT->Fill(kChamber, typeIndex(id, 2));
            }
          }  //end clct and wire digi check
        }
      }  //end if (thisStripFired)
    }
  }

  //rechits
  CSCRecHit2DCollection::const_iterator recIt;
  for (recIt = recHits->begin(); recIt != recHits->end(); recIt++) {
    CSCDetId idrec = (CSCDetId)(*recIt).cscDetId();
    int kEndcap = idrec.endcap();
    int kRing = idrec.ring();
    int kStation = idrec.station();
    int kChamber = idrec.chamber();
    if (!rechito[kEndcap - 1][kStation - 1][kRing - 1][kChamber - 1]) {
      rechito[kEndcap - 1][kStation - 1][kRing - 1][kChamber - 1] = true;
      hORecHitsSerial->Fill(chamberSerial(idrec));
      hORecHits->Fill(kChamber, typeIndex(idrec, 2));
      hasRecHits = true;
    }
  }

  //segments
  for (CSCSegmentCollection::const_iterator segIt = cscSegments->begin(); segIt != cscSegments->end(); segIt++) {
    CSCDetId id = (CSCDetId)(*segIt).cscDetId();
    int kEndcap = id.endcap();
    int kRing = id.ring();
    int kStation = id.station();
    int kChamber = id.chamber();
    if (!segmento[kEndcap - 1][kStation - 1][kRing - 1][kChamber - 1]) {
      segmento[kEndcap - 1][kStation - 1][kRing - 1][kChamber - 1] = true;
      hOSegmentsSerial->Fill(chamberSerial(id));
      hOSegments->Fill(kChamber, typeIndex(id, 2));
      hasSegments = true;
    }
  }

  //Overall CSC Occupancy
  hCSCOccupancy->Fill(1);
  if (hasWires)
    hCSCOccupancy->Fill(3);
  if (hasStrips)
    hCSCOccupancy->Fill(5);
  if (hasWires && hasStrips)
    hCSCOccupancy->Fill(7);
  if (hasRecHits)
    hCSCOccupancy->Fill(9);
  if (hasSegments)
    hCSCOccupancy->Fill(11);
}

doPedestalNoise()

void CSCOfflineMonitor::doPedestalNoise ( edm::Handle< CSCStripDigiCollection >  strips, edm::ESHandle< CSCGeometry >  cscGeom  )

private

Definition at line 1095 of file CSCOfflineMonitor.cc.

References dqmMemoryStats::float, CSCGeometry::gangedStrips(), getSignal(), hStripPed, CSCDetId::station(), DigiDM_cff::strips, remoteMonitoring_LASER_era2018_cfg::threshold, and typeIndex().

Referenced by analyze().

                                                                          {
  for (CSCStripDigiCollection::DigiRangeIterator dPNiter = strips->begin(); dPNiter != strips->end(); dPNiter++) {
    CSCDetId id = (CSCDetId)(*dPNiter).first;
    int kStation = id.station();
    int kRing = id.ring();
    std::vector<CSCStripDigi>::const_iterator pedIt = (*dPNiter).second.first;
    std::vector<CSCStripDigi>::const_iterator lStrip = (*dPNiter).second.second;
    for (; pedIt != lStrip; ++pedIt) {
      int myStrip = pedIt->getStrip();
      std::vector<int> myADCVals = pedIt->getADCCounts();
      float TotalADC = getSignal(*strips, id, myStrip);
      bool thisStripFired = false;
      float thisPedestal = 0.5 * (float)(myADCVals[0] + myADCVals[1]);
      float thisSignal =
          (1. / 6) * (myADCVals[2] + myADCVals[3] + myADCVals[4] + myADCVals[5] + myADCVals[6] + myADCVals[7]);
      float threshold = 13.3;

      // Why is this code block even here? Doesn't use myStrip after setting it (converts channel to strip
      // for ganged ME11A
      if ((kStation == 1 && kRing == 4) && cscGeom->gangedStrips()) {
        kRing = 1;
        if (myStrip <= 16)
          myStrip += 64;  // no trapping for any bizarreness
      }

      if (TotalADC > threshold) {
        thisStripFired = true;
      }
      if (!thisStripFired) {
        float ADC = thisSignal - thisPedestal;
        hStripPed[typeIndex(id) - 1]->Fill(ADC);
      }
    }
  }
}

doRecHits()

void CSCOfflineMonitor::doRecHits ( edm::Handle< CSCRecHit2DCollection >  recHits, edm::Handle< CSCStripDigiCollection >  strips, edm::ESHandle< CSCGeometry >  cscGeom  )

private

Find the charge associated with this hit

Definition at line 1138 of file CSCOfflineMonitor.cc.

References CSCDetId::endcap(), dqm::impl::MonitorElement::Fill(), hRHGlobal, hRHnrechits, hRHnrechitsHi, hRHRatioQ, hRHsterr, hRHstpos, hRHSumQ, hRHTiming, hRHTimingAnode, mps_fire::i, dqmiolumiharvest::j, CSCGeometry::layer(), FastTrackerRecHitMaskProducer_cfi::recHits, CSCDetId::station(), GeomDet::toGlobal(), typeIndex(), PV3DBase< T, PVType, FrameType >::x(), and PV3DBase< T, PVType, FrameType >::y().

Referenced by analyze().

                                                                    {
  // Get the RecHits collection :
  int nRecHits = recHits->size();

  // ---------------------
  // Loop over rechits
  // ---------------------
  // Build iterator for rechits and loop :
  CSCRecHit2DCollection::const_iterator dRHIter;
  for (dRHIter = recHits->begin(); dRHIter != recHits->end(); dRHIter++) {
    // Find chamber with rechits in CSC
    CSCDetId idrec = (CSCDetId)(*dRHIter).cscDetId();

    // Store rechit as a Local Point:
    LocalPoint rhitlocal = (*dRHIter).localPosition();
    //float xreco = rhitlocal.x();
    //float yreco = rhitlocal.y();

    // Get the reconstucted strip position and error
    float stpos = (*dRHIter).positionWithinStrip();
    float sterr = (*dRHIter).errorWithinStrip();


    int adcsize = dRHIter->nStrips() * dRHIter->nTimeBins();
    float rHSumQ = 0;
    float sumsides = 0;
    for (unsigned int i = 0; i < dRHIter->nStrips(); i++) {
      for (unsigned int j = 0; j < dRHIter->nTimeBins() - 1; j++) {
        rHSumQ += dRHIter->adcs(i, j);
        if (i != 1)
          sumsides += dRHIter->adcs(i, j);  // skip central strip
      }
    }

    float rHratioQ = sumsides / rHSumQ;
    if (adcsize != 12)
      rHratioQ = -99;

    // Get the signal timing of this hit
    float rHtime = (*dRHIter).tpeak();          //calculated from cathode SCA bins
    float rHtimeAnode = (*dRHIter).wireTime();  // calculated from anode wire bx

    // Get pointer to the layer:
    const CSCLayer* csclayer = cscGeom->layer(idrec);

    // Transform hit position from local chamber geometry to global CMS geom
    GlobalPoint rhitglobal = csclayer->toGlobal(rhitlocal);
    float grecx = rhitglobal.x();
    float grecy = rhitglobal.y();

    // Fill some histograms
    int sIndex = idrec.station() + ((idrec.endcap() - 1) * 4);
    int tIndex = typeIndex(idrec);
    hRHSumQ[tIndex - 1]->Fill(rHSumQ);
    hRHRatioQ[tIndex - 1]->Fill(rHratioQ);
    hRHstpos[tIndex - 1]->Fill(stpos);
    hRHsterr[tIndex - 1]->Fill(sterr);
    hRHTiming[tIndex - 1]->Fill(rHtime);
    hRHTimingAnode[tIndex - 1]->Fill(rHtimeAnode);
    hRHGlobal[sIndex - 1]->Fill(grecx, grecy);

  }  //end rechit loop

  //  if (nRecHits == 0) nRecHits = -1; // I see no point in doing this
  hRHnrechits->Fill(nRecHits);
  hRHnrechitsHi->Fill(nRecHits);
}

doResolution()

void CSCOfflineMonitor::doResolution ( edm::Handle< CSCSegmentCollection >  cscSegments, edm::ESHandle< CSCGeometry >  cscGeom  )

private

Find the strip containing this hit

Definition at line 1337 of file CSCOfflineMonitor.cc.

References dtChamberEfficiency_cfi::cscSegments, fitX(), hSResid, kLayer(), CSCDetId::layer(), CSCDetId::ring(), CSCDetId::station(), and typeIndex().

Referenced by analyze().

                                                                       {
  for (CSCSegmentCollection::const_iterator dSiter = cscSegments->begin(); dSiter != cscSegments->end(); dSiter++) {
    CSCDetId id = (CSCDetId)(*dSiter).cscDetId();
    //
    // try to get the CSC recHits that contribute to this segment.
    std::vector<CSCRecHit2D> theseRecHits = (*dSiter).specificRecHits();
    int nRH = (*dSiter).nRecHits();
    int jRH = 0;
    CLHEP::HepMatrix sp(6, 1);
    CLHEP::HepMatrix se(6, 1);
    for (vector<CSCRecHit2D>::const_iterator iRH = theseRecHits.begin(); iRH != theseRecHits.end(); iRH++) {
      jRH++;
      CSCDetId idRH = (CSCDetId)(*iRH).cscDetId();
      //int kEndcap  = idRH.endcap();
      int kRing = idRH.ring();
      int kStation = idRH.station();
      //int kChamber = idRH.chamber();
      int kLayer = idRH.layer();

      int centerid = iRH->nStrips() / 2 + 1;
      int centerStrip = iRH->channels(centerid - 1);

      // If this segment has 6 hits, find the position of each hit on the strip in units of stripwidth and store values
      if (nRH == 6) {
        float stpos = (*iRH).positionWithinStrip();
        se(kLayer, 1) = (*iRH).errorWithinStrip();
        // Take into account half-strip staggering of layers (ME1/1 has no staggering)
        if (kStation == 1 && (kRing == 1 || kRing == 4))
          sp(kLayer, 1) = stpos + centerStrip;
        else {
          if (kLayer == 1 || kLayer == 3 || kLayer == 5)
            sp(kLayer, 1) = stpos + centerStrip;
          if (kLayer == 2 || kLayer == 4 || kLayer == 6)
            sp(kLayer, 1) = stpos - 0.5 + centerStrip;
        }
      }
    }

    // Fit all points except layer 3, then compare expected value for layer 3 to reconstructed value
    //    float residual = -99.; // used to fill always
    if (nRH == 6) {
      float expected = fitX(sp, se);
      float residual = expected - sp(3, 1);

      hSResid[typeIndex(id) - 1]->Fill(residual);  // fill here so stats make sense
    }

    //  hSResid[typeIndex(id)-1]->Fill(residual); // used to fill here but then stats distorted by underflows

  }  // end segment loop
}

doSegments()

void CSCOfflineMonitor::doSegments ( edm::Handle< CSCSegmentCollection >  cscSegments, edm::ESHandle< CSCGeometry >  cscGeom  )

private

Definition at line 1215 of file CSCOfflineMonitor.cc.

References CSCGeometry::chamber(), chamberSerial(), ChiSquaredProbability(), dtChamberEfficiency_cfi::cscSegments, dqm::impl::MonitorElement::Fill(), hSChiSq, hSChiSqAll, hSChiSqProb, hSChiSqProbAll, hSGlobalPhi, hSGlobalTheta, hSnhits, hSnhitsAll, hSnSegments, hSTimeAnode, hSTimeAnodeByChamberType, hSTimeAnodeSerial, hSTimeCathode, hSTimeCathodeByChamberType, hSTimeCathodeSerial, hSTimeCombined, hSTimeCombinedByChamberType, hSTimeCombinedSerial, hSTimeDiff, hSTimeDiffByChamberType, hSTimeDiffSerial, hSTimeVsTOF, hSTimeVsZ, mps_fire::i, dqmiolumiharvest::j, nhits, PV3DBase< T, PVType, FrameType >::phi(), mathSSE::sqrt(), PV3DBase< T, PVType, FrameType >::theta(), GeomDet::toGlobal(), typeIndex(), PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

Referenced by analyze().

                                                                                                                {
  // get CSC segment collection
  int nSegments = cscSegments->size();

  for (CSCSegmentCollection::const_iterator dSiter = cscSegments->begin(); dSiter != cscSegments->end(); dSiter++) {
    CSCDetId id = (CSCDetId)(*dSiter).cscDetId();
    float chisq = (*dSiter).chi2();
    int nhits = (*dSiter).nRecHits();
    int nDOF = 2 * nhits - 4;
    float nChi2 = chisq / nDOF;
    double chisqProb = ChiSquaredProbability((double)chisq, nDOF);
    LocalPoint localPos = (*dSiter).localPosition();
    LocalVector segDir = (*dSiter).localDirection();

    // prepare to calculate segment times
    float timeCathode = 0;   //average from cathode information alone
    float timeAnode = 0;     //average from pruned anode information alone
    float timeCombined = 0;  //average from cathode hits and pruned anode list
    std::vector<float> cathodeTimes;
    std::vector<float> anodeTimes;
    // Get the CSC recHits that contribute to this segment.
    std::vector<CSCRecHit2D> theseRecHits = (*dSiter).specificRecHits();
    for (vector<CSCRecHit2D>::const_iterator iRH = theseRecHits.begin(); iRH != theseRecHits.end(); iRH++) {
      if (!((*iRH).isValid()))
        continue;  // only interested in valid hits
      cathodeTimes.push_back((*iRH).tpeak());
      anodeTimes.push_back((*iRH).wireTime());
    }  //end rechit loop

    // Calculate cathode average
    for (unsigned int i = 0; i < cathodeTimes.size(); i++)
      timeCathode += cathodeTimes[i] / cathodeTimes.size();

    // Prune the anode list to deal with the late tail
    float anodeMaxDiff;
    bool modified = false;
    std::vector<float>::iterator anodeMaxHit;
    do {
      if (anodeTimes.empty())
        continue;
      timeAnode = 0;
      anodeMaxDiff = 0;
      modified = false;

      // Find the average
      for (unsigned int j = 0; j < anodeTimes.size(); j++)
        timeAnode += anodeTimes[j] / anodeTimes.size();

      // Find the maximum outlier hit
      for (unsigned int j = 0; j < anodeTimes.size(); j++) {
        if (fabs(anodeTimes[j] - timeAnode) > anodeMaxDiff) {
          anodeMaxHit = anodeTimes.begin() + j;
          anodeMaxDiff = fabs(anodeTimes[j] - timeAnode);
        }
      }

      // Cut hit if its greater than some time away
      if (anodeMaxDiff > 26) {
        modified = true;
        anodeTimes.erase(anodeMaxHit);
      }
    } while (modified);

    // Calculate combined anode and cathode time average
    if (cathodeTimes.size() + anodeTimes.size() > 0)
      timeCombined = (timeCathode * cathodeTimes.size() + timeAnode * anodeTimes.size()) /
                     (cathodeTimes.size() + anodeTimes.size());

    // global transformation
    float globX = 0.;
    float globY = 0.;
    float globZ = 0.;
    float globTOF = 0.;
    float globTheta = 0.;
    float globPhi = 0.;
    const CSCChamber* cscchamber = cscGeom->chamber(id);
    if (cscchamber) {
      GlobalPoint globalPosition = cscchamber->toGlobal(localPos);
      globX = globalPosition.x();
      globY = globalPosition.y();
      globZ = globalPosition.z();
      globTOF = sqrt(globX * globX + globY * globY + globZ * globZ);
      GlobalVector globalDirection = cscchamber->toGlobal(segDir);
      globTheta = globalDirection.theta();
      globPhi = globalDirection.phi();
    }

    // Fill histos
    int tIndex = typeIndex(id);
    hSnhitsAll->Fill(nhits);
    hSnhits[tIndex - 1]->Fill(nhits);
    hSChiSqAll->Fill(nChi2);
    hSChiSq[tIndex - 1]->Fill(nChi2);
    hSChiSqProbAll->Fill(chisqProb);
    hSChiSqProb[tIndex - 1]->Fill(chisqProb);
    hSGlobalTheta->Fill(globTheta);
    hSGlobalPhi->Fill(globPhi);
    hSTimeDiff->Fill(timeAnode - timeCathode);
    hSTimeDiffByChamberType[tIndex - 1]->Fill(timeAnode - timeCathode);
    hSTimeAnode->Fill(timeAnode);
    hSTimeAnodeByChamberType[tIndex - 1]->Fill(timeAnode);
    hSTimeCathode->Fill(timeCathode);
    hSTimeCathodeByChamberType[tIndex - 1]->Fill(timeCathode);
    hSTimeCombined->Fill(timeCombined);
    hSTimeCombinedByChamberType[tIndex - 1]->Fill(timeCombined);
    hSTimeDiffSerial->Fill(chamberSerial(id), timeAnode - timeCathode);
    hSTimeAnodeSerial->Fill(chamberSerial(id), timeAnode);
    hSTimeCathodeSerial->Fill(chamberSerial(id), timeCathode);
    hSTimeCombinedSerial->Fill(chamberSerial(id), timeCombined);
    hSTimeVsZ->Fill(globZ, timeCombined);
    hSTimeVsTOF->Fill(globTOF, timeCombined);

  }  // end segment loop

  hSnSegments->Fill(nSegments);
}

doStripDigis()

void CSCOfflineMonitor::doStripDigis ( edm::Handle< CSCStripDigiCollection >  strips )

private

Definition at line 1057 of file CSCOfflineMonitor.cc.

References change_name::diff, dqm::impl::MonitorElement::Fill(), dqmMemoryStats::float, cms::cuda::for(), hStripNFired, hStripNFiredHi, hStripNumber, DigiDM_cff::strips, remoteMonitoring_LASER_era2018_cfg::threshold, and typeIndex().

Referenced by analyze().

                                                                             {
  int nStripsFired = 0;
  for (CSCStripDigiCollection::DigiRangeIterator dSDiter = strips->begin(); dSDiter != strips->end(); dSDiter++) {
    CSCDetId id = (CSCDetId)(*dSDiter).first;
    std::vector<CSCStripDigi>::const_iterator stripIter = (*dSDiter).second.first;
    std::vector<CSCStripDigi>::const_iterator lStrip = (*dSDiter).second.second;
    for (; stripIter != lStrip; ++stripIter) {
      int myStrip = stripIter->getStrip();
      std::vector<int> myADCVals = stripIter->getADCCounts();
      bool thisStripFired = false;
      float thisPedestal = 0.5 * (float)(myADCVals[0] + myADCVals[1]);
      float threshold = 13.3;
      float diff = 0.;
      for (unsigned int iCount = 0; iCount < myADCVals.size(); iCount++) {
        diff = (float)myADCVals[iCount] - thisPedestal;
        if (diff > threshold) {
          thisStripFired = true;
        }
      }
      if (thisStripFired) {
        nStripsFired++;
        hStripNumber[typeIndex(id) - 1]->Fill(myStrip);
      }
    }
  }  // end strip loop

  hStripNFired->Fill(nStripsFired);
  hStripNFiredHi->Fill(nStripsFired);

  // fill n per event
}

doWireDigis()

void CSCOfflineMonitor::doWireDigis ( edm::Handle< CSCWireDigiCollection >  wires )

private

Definition at line 1032 of file CSCOfflineMonitor.cc.

References dqm::impl::MonitorElement::Fill(), cms::cuda::for(), hWirenGroupsTotal, hWirenGroupsTotalHi, hWireNumber, hWireTBin, typeIndex(), and DigiDM_cff::wires.

Referenced by analyze().

                                                                          {
  int nWireGroupsTotal = 0;
  for (CSCWireDigiCollection::DigiRangeIterator dWDiter = wires->begin(); dWDiter != wires->end(); dWDiter++) {
    CSCDetId id = (CSCDetId)(*dWDiter).first;
    std::vector<CSCWireDigi>::const_iterator wireIter = (*dWDiter).second.first;
    std::vector<CSCWireDigi>::const_iterator lWire = (*dWDiter).second.second;
    for (; wireIter != lWire; ++wireIter) {
      int myWire = wireIter->getWireGroup();
      int myTBin = wireIter->getTimeBin();
      nWireGroupsTotal++;
      hWireTBin[typeIndex(id) - 1]->Fill(myTBin);
      hWireNumber[typeIndex(id) - 1]->Fill(myWire);
    }
  }  // end wire loop

  hWirenGroupsTotal->Fill(nWireGroupsTotal);
  hWirenGroupsTotalHi->Fill(nWireGroupsTotal);
}

extrapolate1D()

double CSCOfflineMonitor::extrapolate1D ( double  initPosition, double  initDirection, double  parameterOfTheLine  )

inlineprivate

Definition at line 141 of file CSCOfflineMonitor.h.

Referenced by doEfficiencies().

                                                                                             {
    double extrapolatedPosition = initPosition + initDirection * parameterOfTheLine;
    return extrapolatedPosition;
  }

fillEfficiencyHistos()

void CSCOfflineMonitor::fillEfficiencyHistos ( int  bin, int  flag  )

private

fitX()

float CSCOfflineMonitor::fitX ( const CLHEP::HepMatrix &  sp, const CLHEP::HepMatrix &  ep  )

private

Definition at line 1396 of file CSCOfflineMonitor.cc.

References dumpMFGeometry_cfg::delta, debug_messages_cfi::errors, mps_fire::i, hiPixelPairStep_cff::points, and slope.

Referenced by doResolution().

                                                                                        {
  float S = 0;
  float Sx = 0;
  float Sy = 0;
  float Sxx = 0;
  float Sxy = 0;
  float sigma2 = 0;

  for (int i = 1; i < 7; i++) {
    if (i != 3) {
      sigma2 = errors(i, 1) * errors(i, 1);
      S = S + (1 / sigma2);
      Sy = Sy + (points(i, 1) / sigma2);
      Sx = Sx + ((i) / sigma2);
      Sxx = Sxx + (i * i) / sigma2;
      Sxy = Sxy + (((i)*points(i, 1)) / sigma2);
    }
  }

  float delta = S * Sxx - Sx * Sx;
  float intercept = (Sxx * Sy - Sx * Sxy) / delta;
  float slope = (S * Sxy - Sx * Sy) / delta;

  return (intercept + slope * 3);
}

getSignal()

float CSCOfflineMonitor::getSignal ( const CSCStripDigiCollection &  stripdigis, CSCDetId  idRH, int  centerStrip  )

private

Definition at line 1429 of file CSCOfflineMonitor.cc.

References dqmMemoryStats::float, if(), and dqmdumpme::last.

Referenced by doPedestalNoise().

                                                                                                           {
  float SigADC[5];
  float TotalADC = 0;
  SigADC[0] = 0;
  SigADC[1] = 0;
  SigADC[2] = 0;
  SigADC[3] = 0;
  SigADC[4] = 0;

  // Loop over strip digis
  CSCStripDigiCollection::DigiRangeIterator sIt;

  for (sIt = stripdigis.begin(); sIt != stripdigis.end(); sIt++) {
    CSCDetId id = (CSCDetId)(*sIt).first;
    if (id == idCS) {
      // First, find the Signal-Pedestal for center strip
      vector<CSCStripDigi>::const_iterator digiItr = (*sIt).second.first;
      vector<CSCStripDigi>::const_iterator last = (*sIt).second.second;
      for (; digiItr != last; ++digiItr) {
        int thisStrip = digiItr->getStrip();
        if (thisStrip == (centerStrip)) {
          std::vector<int> myADCVals = digiItr->getADCCounts();
          float thisPedestal = 0.5 * (float)(myADCVals[0] + myADCVals[1]);
          float thisSignal = (myADCVals[2] + myADCVals[3] + myADCVals[4] + myADCVals[5] + myADCVals[6] + myADCVals[7]);
          SigADC[0] = thisSignal - 6 * thisPedestal;
        }
        // Now,find the Signal-Pedestal for neighbouring 4 strips
        if (thisStrip == (centerStrip + 1)) {
          std::vector<int> myADCVals = digiItr->getADCCounts();
          float thisPedestal = 0.5 * (float)(myADCVals[0] + myADCVals[1]);
          float thisSignal = (myADCVals[2] + myADCVals[3] + myADCVals[4] + myADCVals[5] + myADCVals[6] + myADCVals[7]);
          SigADC[1] = thisSignal - 6 * thisPedestal;
        }
        if (thisStrip == (centerStrip + 2)) {
          std::vector<int> myADCVals = digiItr->getADCCounts();
          float thisPedestal = 0.5 * (float)(myADCVals[0] + myADCVals[1]);
          float thisSignal = (myADCVals[2] + myADCVals[3] + myADCVals[4] + myADCVals[5] + myADCVals[6] + myADCVals[7]);
          SigADC[2] = thisSignal - 6 * thisPedestal;
        }
        if (thisStrip == (centerStrip - 1)) {
          std::vector<int> myADCVals = digiItr->getADCCounts();
          float thisPedestal = 0.5 * (float)(myADCVals[0] + myADCVals[1]);
          float thisSignal = (myADCVals[2] + myADCVals[3] + myADCVals[4] + myADCVals[5] + myADCVals[6] + myADCVals[7]);
          SigADC[3] = thisSignal - 6 * thisPedestal;
        }
        if (thisStrip == (centerStrip - 2)) {
          std::vector<int> myADCVals = digiItr->getADCCounts();
          float thisPedestal = 0.5 * (float)(myADCVals[0] + myADCVals[1]);
          float thisSignal = (myADCVals[2] + myADCVals[3] + myADCVals[4] + myADCVals[5] + myADCVals[6] + myADCVals[7]);
          SigADC[4] = thisSignal - 6 * thisPedestal;
        }
      }
      TotalADC = 0.2 * (SigADC[0] + SigADC[1] + SigADC[2] + SigADC[3] + SigADC[4]);
    }
  }
  return TotalADC;
}

lineParametrization()

double CSCOfflineMonitor::lineParametrization ( double  z1Position, double  z2Position, double  z1Direction  )

inlineprivate

Definition at line 136 of file CSCOfflineMonitor.h.

Referenced by doEfficiencies().

                                                                                       {
    double parameterLine = (z2Position - z1Position) / z1Direction;
    return parameterLine;
  }

typeIndex()

int CSCOfflineMonitor::typeIndex ( CSCDetId  id, int  flag = 1  )

private

Definition at line 2083 of file CSCOfflineMonitor.cc.

References makeMuonMisalignmentScenario::endcap, RemoveAddSevLevel::flag, relativeConstraints::ring, and relativeConstraints::station.

Referenced by doBXMonitor(), doOccupancies(), doPedestalNoise(), doRecHits(), doResolution(), doSegments(), doStripDigis(), and doWireDigis().

                                                      {
  // linearized index based on endcap, station, and ring

  if (flag == 1) {
    int index = 0;
    if (id.station() == 1)
      index = id.ring();
    else
      index = id.station() * 2 + id.ring();
    if (id.endcap() == 1)
      index = index + 10;
    if (id.endcap() == 2)
      index = 11 - index;
    return index;
  }

  else if (flag == 2) {
    int index = 0;
    if (id.station() == 1 && id.ring() != 4)
      index = id.ring() + 1;
    if (id.station() == 1 && id.ring() == 4)
      index = 1;
    if (id.station() != 1)
      index = id.station() * 2 + id.ring();
    if (id.endcap() == 1)
      index = index + 10;
    if (id.endcap() == 2)
      index = 11 - index;
    return index;
  }

  else
    return 0;
}

withinSensitiveRegion()

bool CSCOfflineMonitor::withinSensitiveRegion ( LocalPoint  localPos, const std::array< const float, 4 > &  layerBounds, int  station, int  ring, float  shiftFromEdge, float  shiftFromDeadZone  )

private

Definition at line 1985 of file CSCOfflineMonitor.cc.

References funct::abs(), relativeConstraints::ring, relativeConstraints::station, PV3DBase< T, PVType, FrameType >::x(), and PV3DBase< T, PVType, FrameType >::y().

Referenced by doEfficiencies().

                                                                       {
  //---- check if it is in a good local region (sensitive area - geometrical and HV boundaries excluded)
  bool pass = false;

  float y_center = 0.;
  double yUp = layerBounds[3] + y_center;
  double yDown = -layerBounds[3] + y_center;
  double xBound1Shifted = layerBounds[0] - shiftFromEdge;  //
  double xBound2Shifted = layerBounds[1] - shiftFromEdge;  //
  double lineSlope = (yUp - yDown) / (xBound2Shifted - xBound1Shifted);
  double lineConst = yUp - lineSlope * xBound2Shifted;
  double yBorder = lineSlope * abs(localPos.x()) + lineConst;

  //bool withinChamberOnly = false;// false = "good region"; true - boundaries only
  std::vector<float> deadZoneCenter(6);
  float cutZone = shiftFromDeadZone;  //cm
  //---- hardcoded... not good
  if (station > 1 && station < 5) {
    if (2 == ring) {
      deadZoneCenter[0] = -162.48;
      deadZoneCenter[1] = -81.8744;
      deadZoneCenter[2] = -21.18165;
      deadZoneCenter[3] = 39.51105;
      deadZoneCenter[4] = 100.2939;
      deadZoneCenter[5] = 160.58;

      if (localPos.y() > yBorder &&
          ((localPos.y() > deadZoneCenter[0] + cutZone && localPos.y() < deadZoneCenter[1] - cutZone) ||
           (localPos.y() > deadZoneCenter[1] + cutZone && localPos.y() < deadZoneCenter[2] - cutZone) ||
           (localPos.y() > deadZoneCenter[2] + cutZone && localPos.y() < deadZoneCenter[3] - cutZone) ||
           (localPos.y() > deadZoneCenter[3] + cutZone && localPos.y() < deadZoneCenter[4] - cutZone) ||
           (localPos.y() > deadZoneCenter[4] + cutZone && localPos.y() < deadZoneCenter[5] - cutZone))) {
        pass = true;
      }
    } else if (1 == ring) {
      if (2 == station) {
        deadZoneCenter[0] = -95.80;
        deadZoneCenter[1] = -27.47;
        deadZoneCenter[2] = 33.67;
        deadZoneCenter[3] = 90.85;
      } else if (3 == station) {
        deadZoneCenter[0] = -89.305;
        deadZoneCenter[1] = -39.705;
        deadZoneCenter[2] = 20.195;
        deadZoneCenter[3] = 77.395;
      } else if (4 == station) {
        deadZoneCenter[0] = -75.645;
        deadZoneCenter[1] = -26.055;
        deadZoneCenter[2] = 23.855;
        deadZoneCenter[3] = 70.575;
      }
      if (localPos.y() > yBorder &&
          ((localPos.y() > deadZoneCenter[0] + cutZone && localPos.y() < deadZoneCenter[1] - cutZone) ||
           (localPos.y() > deadZoneCenter[1] + cutZone && localPos.y() < deadZoneCenter[2] - cutZone) ||
           (localPos.y() > deadZoneCenter[2] + cutZone && localPos.y() < deadZoneCenter[3] - cutZone))) {
        pass = true;
      }
    }
  } else if (1 == station) {
    if (3 == ring) {
      deadZoneCenter[0] = -83.155;
      deadZoneCenter[1] = -22.7401;
      deadZoneCenter[2] = 27.86665;
      deadZoneCenter[3] = 81.005;
      if (localPos.y() > yBorder &&
          ((localPos.y() > deadZoneCenter[0] + cutZone && localPos.y() < deadZoneCenter[1] - cutZone) ||
           (localPos.y() > deadZoneCenter[1] + cutZone && localPos.y() < deadZoneCenter[2] - cutZone) ||
           (localPos.y() > deadZoneCenter[2] + cutZone && localPos.y() < deadZoneCenter[3] - cutZone))) {
        pass = true;
      }
    } else if (2 == ring) {
      deadZoneCenter[0] = -86.285;
      deadZoneCenter[1] = -32.88305;
      deadZoneCenter[2] = 32.867423;
      deadZoneCenter[3] = 88.205;
      if (localPos.y() > (yBorder) &&
          ((localPos.y() > deadZoneCenter[0] + cutZone && localPos.y() < deadZoneCenter[1] - cutZone) ||
           (localPos.y() > deadZoneCenter[1] + cutZone && localPos.y() < deadZoneCenter[2] - cutZone) ||
           (localPos.y() > deadZoneCenter[2] + cutZone && localPos.y() < deadZoneCenter[3] - cutZone))) {
        pass = true;
      }
    } else {
      deadZoneCenter[0] = -81.0;
      deadZoneCenter[1] = 81.0;
      if (localPos.y() > (yBorder) &&
          (localPos.y() > deadZoneCenter[0] + cutZone && localPos.y() < deadZoneCenter[1] - cutZone)) {
        pass = true;
      }
    }
  }
  return pass;
}

Member Data Documentation

al_token

edm::EDGetTokenT<CSCALCTDigiCollection> CSCOfflineMonitor::al_token

private

Definition at line 89 of file CSCOfflineMonitor.h.

Referenced by analyze(), and CSCOfflineMonitor().

cl_token

edm::EDGetTokenT<CSCCLCTDigiCollection> CSCOfflineMonitor::cl_token

private

Definition at line 90 of file CSCOfflineMonitor.h.

Referenced by analyze(), and CSCOfflineMonitor().

cscGeomToken_

const edm::ESGetToken<CSCGeometry, MuonGeometryRecord> CSCOfflineMonitor::cscGeomToken_

private

Definition at line 94 of file CSCOfflineMonitor.h.

Referenced by analyze().

hALCTgetBX

MonitorElement* CSCOfflineMonitor::hALCTgetBX

private

Definition at line 241 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doBXMonitor().

hALCTgetBX2Denominator

MonitorElement* CSCOfflineMonitor::hALCTgetBX2Denominator

private

Definition at line 245 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doBXMonitor().

hALCTgetBX2DNumerator

MonitorElement* CSCOfflineMonitor::hALCTgetBX2DNumerator

private

Definition at line 246 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doBXMonitor().

hALCTgetBXSerial

MonitorElement* CSCOfflineMonitor::hALCTgetBXSerial

private

Definition at line 242 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doBXMonitor().

hALCTMatch

MonitorElement* CSCOfflineMonitor::hALCTMatch

private

Definition at line 248 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doBXMonitor().

hALCTMatch2Denominator

MonitorElement* CSCOfflineMonitor::hALCTMatch2Denominator

private

Definition at line 252 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doBXMonitor().

hALCTMatch2DNumerator

MonitorElement* CSCOfflineMonitor::hALCTMatch2DNumerator

private

Definition at line 253 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doBXMonitor().

hALCTMatchSerial

MonitorElement* CSCOfflineMonitor::hALCTMatchSerial

private

Definition at line 249 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doBXMonitor().

hCLCTL1A

MonitorElement* CSCOfflineMonitor::hCLCTL1A

private

Definition at line 255 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doBXMonitor().

hCLCTL1A2Denominator

MonitorElement* CSCOfflineMonitor::hCLCTL1A2Denominator

private

Definition at line 259 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doBXMonitor().

hCLCTL1A2DNumerator

MonitorElement* CSCOfflineMonitor::hCLCTL1A2DNumerator

private

Definition at line 260 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doBXMonitor().

hCLCTL1ASerial

MonitorElement* CSCOfflineMonitor::hCLCTL1ASerial

private

Definition at line 256 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doBXMonitor().

hcrateToken_

const edm::ESGetToken<CSCCrateMap, CSCCrateMapRcd> CSCOfflineMonitor::hcrateToken_

private

Definition at line 96 of file CSCOfflineMonitor.h.

Referenced by doBXMonitor().

hCSCOccupancy

MonitorElement* CSCOfflineMonitor::hCSCOccupancy

private

Definition at line 219 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doOccupancies().

hEffDenominator

MonitorElement* CSCOfflineMonitor::hEffDenominator

private

Definition at line 237 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doEfficiencies().

hORecHits

MonitorElement* CSCOfflineMonitor::hORecHits

private

Definition at line 213 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doOccupancies().

hORecHitsSerial

MonitorElement* CSCOfflineMonitor::hORecHitsSerial

private

Definition at line 217 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doOccupancies().

hOSegments

MonitorElement* CSCOfflineMonitor::hOSegments

private

Definition at line 214 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doOccupancies().

hOSegmentsSerial

MonitorElement* CSCOfflineMonitor::hOSegmentsSerial

private

Definition at line 218 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doOccupancies().

hOStrips

MonitorElement* CSCOfflineMonitor::hOStrips

private

Definition at line 211 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doOccupancies().

hOStripsAndWiresAndCLCT

MonitorElement* CSCOfflineMonitor::hOStripsAndWiresAndCLCT

private

Definition at line 212 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doOccupancies().

hOStripSerial

MonitorElement* CSCOfflineMonitor::hOStripSerial

private

Definition at line 216 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doOccupancies().

hOWires

MonitorElement* CSCOfflineMonitor::hOWires

private

Definition at line 209 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doOccupancies().

hOWiresAndCLCT

MonitorElement* CSCOfflineMonitor::hOWiresAndCLCT

private

Definition at line 210 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doOccupancies().

hOWireSerial

MonitorElement* CSCOfflineMonitor::hOWireSerial

private

Definition at line 215 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doOccupancies().

hRHden

MonitorElement* CSCOfflineMonitor::hRHden

private

Definition at line 225 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doEfficiencies().

hRHGlobal

std::vector<MonitorElement *> CSCOfflineMonitor::hRHGlobal

private

Definition at line 172 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doRecHits().

hRHnrechits

MonitorElement* CSCOfflineMonitor::hRHnrechits

private

Definition at line 170 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doRecHits().

hRHnrechitsHi

MonitorElement* CSCOfflineMonitor::hRHnrechitsHi

private

Definition at line 171 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doRecHits().

hRHnum

MonitorElement* CSCOfflineMonitor::hRHnum

private

Definition at line 224 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doEfficiencies().

hRHRatioQ

std::vector<MonitorElement *> CSCOfflineMonitor::hRHRatioQ

private

Definition at line 176 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doRecHits().

hRHSTE2

MonitorElement* CSCOfflineMonitor::hRHSTE2

private

Definition at line 229 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doEfficiencies().

hRHsterr

std::vector<MonitorElement *> CSCOfflineMonitor::hRHsterr

private

Definition at line 178 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doRecHits().

hRHstpos

std::vector<MonitorElement *> CSCOfflineMonitor::hRHstpos

private

Definition at line 177 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doRecHits().

hRHSumQ

std::vector<MonitorElement *> CSCOfflineMonitor::hRHSumQ

private

Definition at line 173 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doRecHits().

hRHTiming

std::vector<MonitorElement *> CSCOfflineMonitor::hRHTiming

private

Definition at line 174 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doRecHits().

hRHTimingAnode

std::vector<MonitorElement *> CSCOfflineMonitor::hRHTimingAnode

private

Definition at line 175 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doRecHits().

hSChiSq

std::vector<MonitorElement *> CSCOfflineMonitor::hSChiSq

private

Definition at line 185 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSChiSqAll

MonitorElement* CSCOfflineMonitor::hSChiSqAll

private

Definition at line 184 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSChiSqProb

std::vector<MonitorElement *> CSCOfflineMonitor::hSChiSqProb

private

Definition at line 187 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSChiSqProbAll

MonitorElement* CSCOfflineMonitor::hSChiSqProbAll

private

Definition at line 186 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSden

MonitorElement* CSCOfflineMonitor::hSden

private

Definition at line 223 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doEfficiencies().

hSensitiveAreaEvt

MonitorElement* CSCOfflineMonitor::hSensitiveAreaEvt

private

Definition at line 238 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doEfficiencies().

hSGlobalPhi

MonitorElement* CSCOfflineMonitor::hSGlobalPhi

private

Definition at line 189 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSGlobalTheta

MonitorElement* CSCOfflineMonitor::hSGlobalTheta

private

Definition at line 188 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSnhits

std::vector<MonitorElement *> CSCOfflineMonitor::hSnhits

private

Definition at line 183 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSnhitsAll

MonitorElement* CSCOfflineMonitor::hSnhitsAll

private

Definition at line 182 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSnSegments

MonitorElement* CSCOfflineMonitor::hSnSegments

private

Definition at line 181 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSnum

MonitorElement* CSCOfflineMonitor::hSnum

private

Definition at line 222 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doEfficiencies().

hSResid

std::vector<MonitorElement *> CSCOfflineMonitor::hSResid

private

Definition at line 206 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doResolution().

hSSTE2

MonitorElement* CSCOfflineMonitor::hSSTE2

private

Definition at line 228 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doEfficiencies().

hSTimeAnode

MonitorElement* CSCOfflineMonitor::hSTimeAnode

private

Definition at line 192 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSTimeAnodeByChamberType

std::vector<MonitorElement *> CSCOfflineMonitor::hSTimeAnodeByChamberType

private

Definition at line 193 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSTimeAnodeSerial

MonitorElement* CSCOfflineMonitor::hSTimeAnodeSerial

private

Definition at line 199 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSTimeCathode

MonitorElement* CSCOfflineMonitor::hSTimeCathode

private

Definition at line 194 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSTimeCathodeByChamberType

std::vector<MonitorElement *> CSCOfflineMonitor::hSTimeCathodeByChamberType

private

Definition at line 195 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSTimeCathodeSerial

MonitorElement* CSCOfflineMonitor::hSTimeCathodeSerial

private

Definition at line 200 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSTimeCombined

MonitorElement* CSCOfflineMonitor::hSTimeCombined

private

Definition at line 196 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSTimeCombinedByChamberType

std::vector<MonitorElement *> CSCOfflineMonitor::hSTimeCombinedByChamberType

private

Definition at line 197 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSTimeCombinedSerial

MonitorElement* CSCOfflineMonitor::hSTimeCombinedSerial

private

Definition at line 201 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSTimeDiff

MonitorElement* CSCOfflineMonitor::hSTimeDiff

private

Definition at line 190 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSTimeDiffByChamberType

std::vector<MonitorElement *> CSCOfflineMonitor::hSTimeDiffByChamberType

private

Definition at line 191 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSTimeDiffSerial

MonitorElement* CSCOfflineMonitor::hSTimeDiffSerial

private

Definition at line 198 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSTimeVsTOF

MonitorElement* CSCOfflineMonitor::hSTimeVsTOF

private

Definition at line 203 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hSTimeVsZ

MonitorElement* CSCOfflineMonitor::hSTimeVsZ

private

Definition at line 202 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doSegments().

hStripNFired

MonitorElement* CSCOfflineMonitor::hStripNFired

private

Definition at line 164 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doStripDigis().

hStripNFiredHi

MonitorElement* CSCOfflineMonitor::hStripNFiredHi

private

Definition at line 165 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doStripDigis().

hStripNumber

std::vector<MonitorElement *> CSCOfflineMonitor::hStripNumber

private

Definition at line 166 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doStripDigis().

hStripPed

std::vector<MonitorElement *> CSCOfflineMonitor::hStripPed

private

Definition at line 167 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doPedestalNoise().

hStripSTE2

MonitorElement* CSCOfflineMonitor::hStripSTE2

private

Definition at line 230 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doEfficiencies().

hWirenGroupsTotal

MonitorElement* CSCOfflineMonitor::hWirenGroupsTotal

private

Definition at line 158 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doWireDigis().

hWirenGroupsTotalHi

MonitorElement* CSCOfflineMonitor::hWirenGroupsTotalHi

private

Definition at line 159 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doWireDigis().

hWireNumber

std::vector<MonitorElement *> CSCOfflineMonitor::hWireNumber

private

Definition at line 161 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doWireDigis().

hWireSTE2

MonitorElement* CSCOfflineMonitor::hWireSTE2

private

Definition at line 231 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doEfficiencies().

hWireTBin

std::vector<MonitorElement *> CSCOfflineMonitor::hWireTBin

private

Definition at line 160 of file CSCOfflineMonitor.h.

Referenced by bookHistograms(), and doWireDigis().

param

edm::ParameterSet CSCOfflineMonitor::param

private

Definition at line 84 of file CSCOfflineMonitor.h.

rd_token

edm::EDGetTokenT<FEDRawDataCollection> CSCOfflineMonitor::rd_token

private

Definition at line 86 of file CSCOfflineMonitor.h.

Referenced by CSCOfflineMonitor(), and doBXMonitor().

rh_token

edm::EDGetTokenT<CSCRecHit2DCollection> CSCOfflineMonitor::rh_token

private

Definition at line 91 of file CSCOfflineMonitor.h.

Referenced by analyze(), and CSCOfflineMonitor().

sd_token

edm::EDGetTokenT<CSCStripDigiCollection> CSCOfflineMonitor::sd_token

private

Definition at line 88 of file CSCOfflineMonitor.h.

Referenced by analyze(), and CSCOfflineMonitor().

se_token

edm::EDGetTokenT<CSCSegmentCollection> CSCOfflineMonitor::se_token

private

Definition at line 92 of file CSCOfflineMonitor.h.

Referenced by analyze(), and CSCOfflineMonitor().

wd_token

edm::EDGetTokenT<CSCWireDigiCollection> CSCOfflineMonitor::wd_token

private

Definition at line 87 of file CSCOfflineMonitor.h.

Referenced by analyze(), and CSCOfflineMonitor().