Inheritance diagram for trigTools.SwitchOnTrigger:

Public Member Functions
def	__call__ (self, process, triggerProducer=None, triggerEventProducer=None, path=None, hltProcess=None, outputModule=None)

def	__init__ (self)

def	getDefaultParameters (self)

def	toolCode (self, process)

Private Attributes
	_comment

	_parameters

Static Private Attributes
	_defaultParameters

	_label

Detailed Description

Enables trigger information in PAT
SwitchOnTrigger( [cms.Process], triggerProducer = 'patTrigger', triggerEventProducer = 'patTriggerEvent', path = '', hltProcess = 'HLT', outputModule = 'out' )
- [cms.Process]       : the 'cms.Process'
- triggerProducer     : PATTriggerProducer module label;
                        optional, default: 'patTrigger'
- triggerEventProducer: PATTriggerEventProducer module label;
                        optional, default: 'patTriggerEvent'
- path                : name of path to use;
                        optional, default: ''
- hltProcess          : HLT process name;
                        optional, default: 'HLT'
- outputModule        : output module label;
                        empty label indicates no output;
                        optional, default: 'out'
Using None as any argument restores its default value.

Definition at line 60 of file trigTools.py.

Constructor & Destructor Documentation

◆ init()

def trigTools.SwitchOnTrigger.__init__ ( self )

Definition at line 80 of file trigTools.py.

     def __init__( self ):
         ConfigToolBase.__init__( self )
         self.addParameter( self._defaultParameters, 'triggerProducer'     , _defaultTriggerProducer     , _defaultTriggerProducerComment )
         self.addParameter( self._defaultParameters, 'triggerEventProducer', _defaultTriggerEventProducer, _defaultTriggerEventProducerComment )
         self.addParameter( self._defaultParameters, 'path'                , _defaultPath                , _defaultPathComment )
         self.addParameter( self._defaultParameters, 'hltProcess'          , _defaultHltProcess          , _defaultHltProcessComment )
         self.addParameter( self._defaultParameters, 'outputModule'        , _defaultOutputModule        , _defaultOutputModuleComment )
         self._parameters = copy.deepcopy( self._defaultParameters )
         self._comment = ""
 

Member Function Documentation

◆ call()

def trigTools.SwitchOnTrigger.__call__	(	self,
		process,
		triggerProducer = `None`,
		triggerEventProducer = `None`,
		path = `None`,
		hltProcess = `None`,
		outputModule = `None`
	)

Definition at line 99 of file trigTools.py.

Referenced by trigTools.SwitchOnTrigger.getDefaultParameters().

                 ):
         if triggerProducer is None:
             triggerProducer = self._defaultParameters[ 'triggerProducer' ].value
         if triggerEventProducer is None:
             triggerEventProducer = self._defaultParameters[ 'triggerEventProducer' ].value
         if path is None:
             path = self._defaultParameters[ 'path' ].value
         if hltProcess is None:
             hltProcess = self._defaultParameters[ 'hltProcess' ].value
         if outputModule is None:
             outputModule = self._defaultParameters[ 'outputModule' ].value
         self.setParameter( 'triggerProducer'     , triggerProducer )
         self.setParameter( 'triggerEventProducer', triggerEventProducer )
         self.setParameter( 'path'                , path )
         self.setParameter( 'hltProcess'          , hltProcess )
         self.setParameter( 'outputModule'        , outputModule )
         self.apply( process )
 

◆ getDefaultParameters()

def trigTools.SwitchOnTrigger.getDefaultParameters ( self )

Definition at line 90 of file trigTools.py.

     def getDefaultParameters( self ):
         return self._defaultParameters
 

◆ toolCode()

def trigTools.SwitchOnTrigger.toolCode	(	self,
		process
	)

Definition at line 117 of file trigTools.py.

References trigTools._addEventContent(), ProcessAcceleratorCUDA.ProcessAcceleratorCUDA._label, metTools.AddMETCollection._label, trackTools.MakeAODTrackCandidates._label, heavyIonTools.ConfigureHeavyIons._label, coreTools.RunOnData._label, heavyIonTools.ProductionDefaults._label, ConfigToolBase.ConfigToolBase._label, LHECOMWeightProducer._label, cmsswVersionTools.PickRelValInputFiles._label, coreTools.RemoveMCMatching._label, trackTools.MakePATTrackCandidates._label, trigTools.SwitchOnTrigger._label, heavyIonTools.SelectionDefaults._label, heavyIonTools.DisbaleMonteCarloDeps._label, tauTools.AddTauCollection._label, trackTools.MakeTrackCandidates._label, jetTools.AddJetCollection._label, jetTools.SwitchJetCollection._label, jetTools.UpdateJetCollection._label, jetTools.AddJetID._label, jetTools.SetTagInfos._label, trigTools._modulesInPath(), heavyIonTools.ConfigureHeavyIons._parameters, trackTools.MakeAODTrackCandidates._parameters, coreTools.RunOnData._parameters, metTools.AddMETCollection._parameters, heavyIonTools.ProductionDefaults._parameters, ConfigToolBase.ConfigToolBase._parameters, TAbsFitConstraint._parameters, TAbsFitParticle._parameters, cmsswVersionTools.PickRelValInputFiles._parameters, coreTools.RemoveMCMatching._parameters, trackTools.MakePATTrackCandidates._parameters, trigTools.SwitchOnTrigger._parameters, heavyIonTools.SelectionDefaults._parameters, heavyIonTools.DisbaleMonteCarloDeps._parameters, tauTools.AddTauCollection._parameters, trackTools.MakeTrackCandidates._parameters, jetTools.AddJetCollection._parameters, jetTools.SwitchJetCollection._parameters, jetTools.UpdateJetCollection._parameters, jetTools.AddJetID._parameters, jetTools.SetTagInfos._parameters, helpers.addToProcessAndTask(), helpers.getPatAlgosToolsTask(), and print().

     def toolCode( self, process ):
         triggerProducer      = self._parameters[ 'triggerProducer' ].value
         triggerEventProducer = self._parameters[ 'triggerEventProducer' ].value
         path                 = self._parameters[ 'path' ].value
         hltProcess           = self._parameters[ 'hltProcess' ].value
         outputModule         = self._parameters[ 'outputModule' ].value
 
         task = getPatAlgosToolsTask(process)
 
         # Load default producers from existing config files, if needed
         if not hasattr( process, triggerProducer ):
             from PhysicsTools.PatAlgos.triggerLayer1.triggerProducer_cfi import patTrigger
             addToProcessAndTask(triggerProducer, patTrigger.clone(), process, task)
         else:
             print('%s():'%( self._label ))
             print('    PATTriggerProducer module \'%s\' exists already in process'%( triggerProducer ))
             print('    ==> entry re-used')
             print(_longLine)
         if not hasattr( process, triggerEventProducer ):
             from PhysicsTools.PatAlgos.triggerLayer1.triggerEventProducer_cfi import patTriggerEvent
             addToProcessAndTask(triggerEventProducer, patTriggerEvent.clone(), process, task)
         else:
             print('%s():'%( self._label ))
             print('    PATTriggerEventProducer module \'%s\' exists already in process'%( triggerEventProducer ))
             print('    ==> entry re-used')
             print(_longLine)
 
         # Maintain configurations
         trigProdMod             = getattr( process, triggerProducer )
         trigProdMod.processName = hltProcess
         if trigProdMod.onlyStandAlone.value() is True:
             trigProdMod.onlyStandAlone = False
             print('    configuration parameter automatically changed')
             print('    PATTriggerProducer %s.onlyStandAlone --> %s'%( triggerProducer, trigProdMod.onlyStandAlone ))
             print(_longLine)
         trigEvtProdMod                    = getattr( process, triggerEventProducer )
         trigEvtProdMod.processName        = hltProcess
         trigEvtProdMod.patTriggerProducer = cms.InputTag( triggerProducer )
         if path != '':
             if not hasattr( process, path ):
                 prodPath = cms.Path( trigProdMod + trigEvtProdMod )
                 setattr( process, path, prodPath )
                 print('%s():'%( self._label ))
                 print('    Path \'%s\' does not exist in process'%( path ))
                 print('    ==> created')
                 print(_longLine)
             # Try to get the order right, but cannot deal with all possible cases.
             # Simply rely on the exclusive usage of these tools without manual intervention.
             else:
                 if not triggerProducer in _modulesInPath( process, path ):
                     prodPath = getattr( process, path )
                     prodPath += trigProdMod
                 if not triggerEventProducer in _modulesInPath( process, path ):
                     prodPath = getattr( process, path )
                     prodPath += trigEvtProdMod
 
         # Add event content
         if outputModule != '':
             patTriggerEventContent = [ 'keep patTriggerObjects_%s_*_%s'%( triggerProducer, process.name_() )
                                      , 'keep patTriggerFilters_%s_*_%s'%( triggerProducer, process.name_() )
                                      , 'keep patTriggerPaths_%s_*_%s'%( triggerProducer, process.name_() )
                                      , 'keep patTriggerEvent_%s_*_%s'%( triggerEventProducer, process.name_() )
                                      ]
             if ( hasattr( trigProdMod, 'addL1Algos' ) and trigProdMod.addL1Algos.value() is True ):
                 patTriggerEventContent += [ 'keep patTriggerConditions_%s_*_%s'%( triggerProducer, process.name_() )
                                           , 'keep patTriggerAlgorithms_%s_*_%s'%( triggerProducer, process.name_() )
                                           ]
             if ( hasattr( trigProdMod, 'saveL1Refs' ) and trigProdMod.saveL1Refs.value() is True ):
                 patTriggerEventContent += patTriggerL1RefsEventContent
             getattr( process, outputModule ).outputCommands = _addEventContent( getattr( process, outputModule ).outputCommands, patTriggerEventContent )
 

Member Data Documentation

◆ _comment

trigTools.SwitchOnTrigger._comment

private

Definition at line 88 of file trigTools.py.

◆ _defaultParameters

trigTools.SwitchOnTrigger._defaultParameters

staticprivate

Definition at line 78 of file trigTools.py.

◆ _label

trigTools.SwitchOnTrigger._label

staticprivate

Definition at line 77 of file trigTools.py.

Referenced by validation.SimpleSample.digest(), validation.SimpleSample.label(), trigTools.SwitchOnTrigger.toolCode(), trigTools.SwitchOnTriggerStandAlone.toolCode(), trigTools.SwitchOnTriggerMatching.toolCode(), trigTools.SwitchOnTriggerMatchingStandAlone.toolCode(), and trigTools.SwitchOnTriggerMatchEmbedding.toolCode().

◆ _parameters

trigTools.SwitchOnTrigger._parameters

private

Definition at line 87 of file trigTools.py.

Public Member Functions

Private Attributes

Static Private Attributes