#include <MuonMiniAOD.h>

Inheritance diagram for MuonMiniAOD:

Public Member Functions
void	analyze (const edm::Event &, const edm::EventSetup &) override
	Inizialize parameters for histo binning. More...

void	bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override

	MuonMiniAOD (const edm::ParameterSet &)
	Constructor. More...

	~MuonMiniAOD () override
	Destructor. More...

Public Member Functions inherited from DQMEDAnalyzer
void	accumulate (edm::Event const &event, edm::EventSetup const &setup) final

void	beginLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final

void	beginRun (edm::Run const &run, edm::EventSetup const &setup) final

void	beginStream (edm::StreamID id) final

virtual void	dqmBeginRun (edm::Run const &, edm::EventSetup const &)

	DQMEDAnalyzer ()

void	endLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final

void	endRun (edm::Run const &run, edm::EventSetup const &setup) final

virtual bool	getCanSaveByLumi ()

Public Member Functions inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
	EDProducer ()=default

	EDProducer (const EDProducer &)=delete

bool	hasAbilityToProduceInBeginLumis () const final

bool	hasAbilityToProduceInBeginProcessBlocks () const final

bool	hasAbilityToProduceInBeginRuns () const final

bool	hasAbilityToProduceInEndLumis () const final

bool	hasAbilityToProduceInEndProcessBlocks () const final

bool	hasAbilityToProduceInEndRuns () const final

const EDProducer &	operator= (const EDProducer &)=delete

Private Member Functions
bool	PassesCut_A (edm::View< pat::Muon >::const_iterator, reco::Vertex, TString)

bool	PassesCut_B (edm::View< pat::Muon >::const_iterator, reco::Vertex, TString)

Private Attributes
bool	doPVCheck_

std::string	metname

edm::ParameterSet	parameters

edm::EDGetTokenT< reco::BeamSpot >	theBeamSpotLabel_

edm::EDGetTokenT< edm::View< pat::Muon > >	theMuonCollectionLabel_

edm::EDGetTokenT< reco::VertexCollection >	theVertexLabel_

std::vector< MonitorElement * >	workingPoints

Additional Inherited Members
Public Types inherited from DQMEDAnalyzer
typedef dqm::reco::DQMStore	DQMStore

typedef dqm::reco::MonitorElement	MonitorElement

Public Types inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
using	CacheTypes = CacheContexts< T... >

using	GlobalCache = typename CacheTypes::GlobalCache

using	HasAbility = AbilityChecker< T... >

using	InputProcessBlockCache = typename CacheTypes::InputProcessBlockCache

using	LuminosityBlockCache = typename CacheTypes::LuminosityBlockCache

using	LuminosityBlockContext = LuminosityBlockContextT< LuminosityBlockCache, RunCache, GlobalCache >

using	LuminosityBlockSummaryCache = typename CacheTypes::LuminosityBlockSummaryCache

using	RunCache = typename CacheTypes::RunCache

using	RunContext = RunContextT< RunCache, GlobalCache >

using	RunSummaryCache = typename CacheTypes::RunSummaryCache

Static Public Member Functions inherited from DQMEDAnalyzer
static void	globalEndJob (DQMEDAnalyzerGlobalCache const *)

static void	globalEndLuminosityBlockProduce (edm::LuminosityBlock &lumi, edm::EventSetup const &setup, LuminosityBlockContext const *context)

static void	globalEndRunProduce (edm::Run &run, edm::EventSetup const &setup, RunContext const *context)

static std::unique_ptr< DQMEDAnalyzerGlobalCache >	initializeGlobalCache (edm::ParameterSet const &)

Protected Member Functions inherited from DQMEDAnalyzer
uint64_t	meId () const

Protected Attributes inherited from DQMEDAnalyzer
edm::EDPutTokenT< DQMToken >	lumiToken_

edm::EDPutTokenT< DQMToken >	runToken_

unsigned int	streamId_

Detailed Description

Definition at line 25 of file MuonMiniAOD.h.

Constructor & Destructor Documentation

◆ MuonMiniAOD()

MuonMiniAOD::MuonMiniAOD ( const edm::ParameterSet & pSet )

Constructor.

Definition at line 6 of file MuonMiniAOD.cc.

                                                     {
   parameters = pSet;
 
   // the services:
 
   theMuonCollectionLabel_ = consumes<edm::View<pat::Muon> >(parameters.getParameter<edm::InputTag>("MuonCollection"));
   theVertexLabel_ = consumes<reco::VertexCollection>(parameters.getParameter<edm::InputTag>("VertexLabel"));
   theBeamSpotLabel_ = mayConsume<reco::BeamSpot>(parameters.getParameter<edm::InputTag>("BeamSpotLabel"));
 }

◆ ~MuonMiniAOD()

MuonMiniAOD::~MuonMiniAOD ( )

override

Destructor.

Definition at line 16 of file MuonMiniAOD.cc.

16 {}

Member Function Documentation

◆ analyze()

void MuonMiniAOD::analyze	(	const edm::Event &	iEvent,
		const edm::EventSetup &	iSetup
	)

overridevirtual

Inizialize parameters for histo binning.

Reimplemented from DQMEDAnalyzer.

Definition at line 76 of file MuonMiniAOD.cc.

References cms::cuda::bs, relativeConstraints::error, iEvent, LogTrace, metname, beam_dqm_sourceclient-live_cfg::monitor, PDWG_BPHSkim_cff::muons, position, bphysicsOniaDQM_cfi::vertex, and PDWG_TauSkim_cff::workingPoints.

                                                                              {
   LogTrace(metname) << "[MuonMiniAOD] Analyze the mu";
 
   // Take the muon container
   edm::Handle<edm::View<pat::Muon> > muons;
   iEvent.getByToken(theMuonCollectionLabel_, muons);
 
   //Vertex information
   edm::Handle<reco::VertexCollection> vertex;
   iEvent.getByToken(theVertexLabel_, vertex);
 
   if (!muons.isValid())
     return;
 
   reco::Vertex::Point posVtx;
   reco::Vertex::Error errVtx;
   unsigned int theIndexOfThePrimaryVertex = 999.;
   if (!vertex.isValid()) {
     LogTrace(metname) << "[EfficiencyAnalyzer] Could not find vertex collection" << std::endl;
     for (unsigned int ind = 0; ind < vertex->size(); ++ind) {
       if ((*vertex)[ind].isValid() && !((*vertex)[ind].isFake())) {
         theIndexOfThePrimaryVertex = ind;
         break;
       }
     }
   }
 
   if (theIndexOfThePrimaryVertex < 100) {
     posVtx = ((*vertex)[theIndexOfThePrimaryVertex]).position();
     errVtx = ((*vertex)[theIndexOfThePrimaryVertex]).error();
   } else {
     LogInfo("RecoMuonValidator") << "reco::PrimaryVertex not found, use BeamSpot position instead\n";
 
     edm::Handle<reco::BeamSpot> recoBeamSpotHandle;
     iEvent.getByToken(theBeamSpotLabel_, recoBeamSpotHandle);
     reco::BeamSpot bs = *recoBeamSpotHandle;
 
     posVtx = bs.position();
     errVtx(0, 0) = bs.BeamWidthX();
     errVtx(1, 1) = bs.BeamWidthY();
     errVtx(2, 2) = bs.sigmaZ();
   }
 
   const reco::Vertex thePrimaryVertex(posVtx, errVtx);
 
   for (edm::View<pat::Muon>::const_iterator muon1 = muons->begin(); muon1 != muons->end(); ++muon1) {
     for (std::vector<MonitorElement*>::iterator monitor = workingPoints.begin(); monitor != workingPoints.end();
          ++monitor) {
       int Pass_A = 0;
       int Pass_B = 0;
       if (PassesCut_A(muon1, thePrimaryVertex, (*monitor)->getName()))
         Pass_A = 1;
       else
         Pass_A = 2;
       if (PassesCut_B(muon1, thePrimaryVertex, (*monitor)->getName()))
         Pass_B = 1;
       else
         Pass_B = 2;
 
       (*monitor)->Fill(Pass_A, Pass_B);
     }
   }
 }

◆ bookHistograms()

void MuonMiniAOD::bookHistograms	(	DQMStore::IBooker &	ibooker,
		edm::Run const &	,
		edm::EventSetup const &
	)

overridevirtual

Implements DQMEDAnalyzer.

Definition at line 17 of file MuonMiniAOD.cc.

References dqm::implementation::IBooker::book2D(), dqm::implementation::NavigatorBase::cd(), beam_dqm_sourceclient-live_cfg::monitor, dqm::implementation::NavigatorBase::setCurrentFolder(), and PDWG_TauSkim_cff::workingPoints.

                                                          {
   ibooker.cd();
   ibooker.setCurrentFolder("Muons_miniAOD/MuonMiniAOD");
 
   workingPoints.push_back(ibooker.book2D("tightMuons", "Tight Muons", 2, 1, 3, 2, 1, 3));
   workingPoints.push_back(ibooker.book2D("mediumMuons", "Medium Muons", 2, 1, 3, 2, 1, 3));
   workingPoints.push_back(ibooker.book2D("looseMuons", "Loose Muons", 2, 1, 3, 2, 1, 3));
   workingPoints.push_back(ibooker.book2D("highPtMuons", "High Pt Muons", 2, 1, 3, 2, 1, 3));
   workingPoints.push_back(ibooker.book2D("softMuons", "Soft Muons", 2, 1, 3, 2, 1, 3));
 
   for (std::vector<MonitorElement*>::iterator monitor = workingPoints.begin(); monitor != workingPoints.end();
        ++monitor) {
     (*monitor)->setBinLabel(1, "Pass", 1);
     (*monitor)->setBinLabel(2, "No Pass", 1);
     (*monitor)->setBinLabel(1, "Pass", 2);
     (*monitor)->setBinLabel(2, "No Pass", 2);
   }
 }

◆ PassesCut_A()

bool MuonMiniAOD::PassesCut_A	(	edm::View< pat::Muon >::const_iterator	muon1,
		reco::Vertex	thePrimaryVertex,
		TString	WorkingPoint
	)

private

Definition at line 38 of file MuonMiniAOD.cc.

References muon::isHighPtMuon(), muon::isLooseMuon(), muon::isMediumMuon(), muon::isSoftMuon(), and muon::isTightMuon().

                                                     {
   if (WorkingPoint == "tightMuons")
     return muon::isTightMuon(*muon1, thePrimaryVertex);
   else if (WorkingPoint == "mediumMuons")
     return muon::isMediumMuon(*muon1);
   else if (WorkingPoint == "looseMuons")
     return muon::isLooseMuon(*muon1);
   else if (WorkingPoint == "highPtMuons")
     return muon::isHighPtMuon(*muon1, thePrimaryVertex);
   else if (WorkingPoint == "softMuons")
     return muon::isSoftMuon(*muon1, thePrimaryVertex);
   else {
     LogInfo("RecoMuonValidator") << "[MuonMiniAOD]: MuonMiniAOD. Unknown WP, returning false.\n";
     return false;
   }
 }

◆ PassesCut_B()

bool MuonMiniAOD::PassesCut_B	(	edm::View< pat::Muon >::const_iterator	muon1,
		reco::Vertex	thePrimaryVertex,
		TString	WorkingPoint
	)

private

Definition at line 57 of file MuonMiniAOD.cc.

                                                     {
   if (WorkingPoint == "tightMuons")
     return muon1->isTightMuon(thePrimaryVertex);
   else if (WorkingPoint == "mediumMuons")
     return muon1->isMediumMuon();
   else if (WorkingPoint == "looseMuons")
     return muon1->isLooseMuon();
   else if (WorkingPoint == "highPtMuons")
     return muon1->isHighPtMuon(thePrimaryVertex);
   else if (WorkingPoint == "softMuons")
     return muon1->isSoftMuon(thePrimaryVertex);
   else {
     LogInfo("RecoMuonValidator") << "[MuonMiniAOD]: MuonMiniAOD. Unknown WP, returning false.\n";
     return false;
   }
 }

Member Data Documentation

◆ doPVCheck_

bool MuonMiniAOD::doPVCheck_

private

Definition at line 54 of file MuonMiniAOD.h.

◆ metname

std::string MuonMiniAOD::metname

private

Definition at line 44 of file MuonMiniAOD.h.

◆ parameters

edm::ParameterSet MuonMiniAOD::parameters

private

Definition at line 40 of file MuonMiniAOD.h.

◆ theBeamSpotLabel_

edm::EDGetTokenT<reco::BeamSpot> MuonMiniAOD::theBeamSpotLabel_

private

Definition at line 56 of file MuonMiniAOD.h.

◆ theMuonCollectionLabel_

edm::EDGetTokenT<edm::View<pat::Muon> > MuonMiniAOD::theMuonCollectionLabel_

private

Definition at line 42 of file MuonMiniAOD.h.

◆ theVertexLabel_

edm::EDGetTokenT<reco::VertexCollection> MuonMiniAOD::theVertexLabel_

private

Definition at line 55 of file MuonMiniAOD.h.

◆ workingPoints

std::vector<MonitorElement *> MuonMiniAOD::workingPoints

private

Definition at line 47 of file MuonMiniAOD.h.

Public Member Functions

Private Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ MuonMiniAOD()

◆ ~MuonMiniAOD()

Member Function Documentation

◆ analyze()

◆ bookHistograms()

◆ PassesCut_A()

◆ PassesCut_B()

Member Data Documentation

◆ doPVCheck_

◆ metname

◆ parameters

◆ theBeamSpotLabel_

◆ theMuonCollectionLabel_

◆ theVertexLabel_

◆ workingPoints