#include <FWFFLooper.h>

Inheritance diagram for FWFFLooper:

Public Member Functions
void	attachTo (edm::ActivityRegistry &) override
	Override this method if you need to monitor the state of the processing. More...

void	autoLoadNewEvent () override

void	beginRun (const edm::Run &, const edm::EventSetup &) override
	Called after all event modules have processed the begin of a Run. More...

void	checkPosition () override

void	display (const std::string &info="")

edm::EDLooperBase::Status	duringLoop (const edm::Event &, const edm::EventSetup &, edm::ProcessingController &) override

edm::EDLooperBase::Status	endOfLoop (const edm::EventSetup &, unsigned int) override

	FWFFLooper (const edm::ParameterSet &)

TEveMagField *	getMagField ()

void	postBeginJob ()

void	postEndJob ()

void	quit () override

void	remakeGeometry (const DisplayGeomRecord &dgRec)

void	requestChanges (const std::string &, const edm::ParameterSet &)

void	setupFieldForPropagator (TEveTrackPropagator *prop)

void	showPathsGUI (const TGWindow *p)

void	startingNewLoop (unsigned int) override

void	stopPlaying () override

	~FWFFLooper () override

Public Member Functions inherited from CmsShowMainBase
FWModelChangeManager *	changeManager ()

virtual void	checkKeyBindingsOnPLayEventsStateChanged ()

	CmsShowMainBase ()

FWColorManager *	colorManager ()

const char *	configFilename () const

FWConfigurationManager *	configurationManager ()

void	doFirstEvent ()

void	doLastEvent ()

void	doNextEvent ()

void	doPreviousEvent ()

void	draw ()

FWEventItemsManager *	eiManager ()

bool	forward () const

const std::string &	geometryFilename (void)

FWGeometry &	getGeom ()

void	goToRunEvent (edm::RunNumber_t, edm::LuminosityBlockNumber_t, edm::EventNumber_t)

FWGUIManager *	guiManager ()

bool	isPlaying () const

void	loadGeometry ()

bool	loop () const

FWModelChangeManager *	modelChangeManager ()

void	partialLoadConfiguration (const std::string &config)

void	partialWriteToConfigFile (const std::string &config)

void	playBackward ()

void	playForward ()

void	registerPhysicsObject (const FWPhysicsObjectDesc &iItem)

void	reloadConfiguration (const std::string &config)

FWSelectionManager *	selectionManager ()

void	setAutoSaveAllViewsFormat (const std::string &fmt)

void	setAutoSaveAllViewsHeight (int x)

void	setConfigFilename (const std::string &f)

void	setGeometryFilename (const std::string &filename)

void	setPlayDelay (Float_t val)

void	setPlayLoop ()

void	setSimGeometryFilename (const std::string &filename, const std::string &geoname)

void	setup (FWNavigatorBase navigator, fireworks::Context context, FWJobMetadataManager *metadataManager)

void	setupActions ()

void	setupAutoLoad (float x)

void	setupConfiguration ()

void	setupDebugSupport ()

void	setupViewManagers ()

void	startAutoLoadTimer ()

CmsShowTaskExecutor *	startupTasks ()

void	stopAutoLoadTimer ()

void	unsetPlayLoop ()

FWViewManagerManager *	viewManager ()

void	writePartialToConfigFile ()

void	writeToConfigFile (const std::string &config)

void	writeToCurrentConfigFile ()

virtual	~CmsShowMainBase () noexcept(false)

Public Member Functions inherited from edm::EDLooperBase
void	beginOfJob (EventSetupImpl const &)

virtual void	beginOfJob (EventSetup const &)

virtual void	beginOfJob ()

void	copyInfo (ScheduleInfo const &)

void	doBeginLuminosityBlock (LuminosityBlockPrincipal &, EventSetupImpl const &, ProcessContext *)

void	doBeginRun (RunPrincipal &, EventSetupImpl const &, ProcessContext *)

Status	doDuringLoop (EventPrincipal &eventPrincipal, EventSetupImpl const &es, ProcessingController &, StreamContext *)

void	doEndLuminosityBlock (LuminosityBlockPrincipal &, EventSetupImpl const &, ProcessContext *)

Status	doEndOfLoop (EventSetupImpl const &es)

void	doEndRun (RunPrincipal &, EventSetupImpl const &, ProcessContext *)

void	doStartingNewLoop ()

	EDLooperBase ()

	EDLooperBase (EDLooperBase const &)=delete

virtual void	endOfJob ()

void	esPrefetchAsync (WaitingTaskHolder iTask, EventSetupImpl const &iImpl, Transition iTrans, ServiceToken const &iToken) const

virtual std::set < eventsetup::EventSetupRecordKey >	modifyingRecords () const

EDLooperBase &	operator= (EDLooperBase const &)=delete

void	prefetchAsync (WaitingTaskHolder iTask, ServiceToken const &token, Transition iTrans, Principal const &iPrincipal, EventSetupImpl const &iImpl) const

void	prepareForNextLoop (eventsetup::EventSetupProvider *esp)

void	setActionTable (ExceptionToActionTable const *actionTable)

void	setModuleChanger (ModuleChanger *)

	~EDLooperBase () noexcept(false) override

Public Member Functions inherited from edm::EDConsumerBase
std::vector< ConsumesInfo >	consumesInfo () const

void	convertCurrentProcessAlias (std::string const &processName)
	Convert "@currentProcess" in InputTag process names to the actual current process name. More...

	EDConsumerBase ()

	EDConsumerBase (EDConsumerBase const &)=delete

	EDConsumerBase (EDConsumerBase &&)=default

ESProxyIndex const *	esGetTokenIndices (edm::Transition iTrans) const

std::vector< ESProxyIndex > const &	esGetTokenIndicesVector (edm::Transition iTrans) const

std::vector< ESRecordIndex > const &	esGetTokenRecordIndicesVector (edm::Transition iTrans) const

ProductResolverIndexAndSkipBit	indexFrom (EDGetToken, BranchType, TypeID const &) const

void	itemsMayGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const

void	itemsToGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const

std::vector < ProductResolverIndexAndSkipBit > const &	itemsToGetFrom (BranchType iType) const

void	labelsForToken (EDGetToken iToken, Labels &oLabels) const

void	modulesWhoseProductsAreConsumed (std::array< std::vector< ModuleDescription const * > , NumBranchTypes > &modulesAll, std::vector< ModuleProcessName > &modulesInPreviousProcesses, ProductRegistry const &preg, std::map< std::string, ModuleDescription const > const &labelsToDesc, std::string const &processName) const

EDConsumerBase const &	operator= (EDConsumerBase const &)=delete

EDConsumerBase &	operator= (EDConsumerBase &&)=default

bool	registeredToConsume (ProductResolverIndex, bool, BranchType) const

bool	registeredToConsumeMany (TypeID const &, BranchType) const

void	selectInputProcessBlocks (ProductRegistry const &productRegistry, ProcessBlockHelperBase const &processBlockHelperBase)

ProductResolverIndexAndSkipBit	uncheckedIndexFrom (EDGetToken) const

void	updateLookup (BranchType iBranchType, ProductResolverIndexHelper const &, bool iPrefetchMayGet)

void	updateLookup (eventsetup::ESRecordsToProxyIndices const &)

virtual	~EDConsumerBase () noexcept(false)

Private Types
typedef std::map< std::string, edm::ParameterSet >	ModuleChanges

Private Member Functions
	FWFFLooper (const FWFFLooper &)

void	loadDefaultGeometryFile (void)

const FWFFLooper &	operator= (const FWFFLooper &)

Private Attributes
bool	m_AllowStep

edm::Service< FWFFHelper >	m_appHelper

bool	m_autoReload

std::unique_ptr < fireworks::Context >	m_context

const edm::ESGetToken < TGeoManager, DisplayGeomRecord >	m_displayGeomToken

TEveManager *	m_EveManager

bool	m_firstTime

edm::ESWatcher< DisplayGeomRecord >	m_geomWatcher

bool	m_isFirstEvent

bool	m_isLastEvent

TEveMagField *	m_MagField

std::unique_ptr < FWFFMetadataManager >	m_metadataManager

std::unique_ptr< FWFFNavigator >	m_navigator

edm::EventID	m_nextEventId

FWPathsPopup *	m_pathsGUI

const edm::ESGetToken < FWRecoGeometry, FWRecoGeometryRecord >	m_recoGeomToken

TRint *	m_Rint

const edm::ESGetToken< RunInfo, RunInfoRcd >	m_runInfoToken

ModuleChanges	m_scheduledChanges

bool	m_ShowEvent

Additional Inherited Members
Public Types inherited from edm::EDLooperBase
enum	Status { kContinue, kStop }

Public Types inherited from edm::EDConsumerBase
typedef ProductLabels	Labels

Protected Member Functions inherited from CmsShowMainBase
fireworks::Context *	context ()

virtual void	eventChangedImp ()

void	eventChangedSlot ()

void	sendVersionInfo ()

Protected Member Functions inherited from edm::EDLooperBase
ModuleChanger *	moduleChanger ()
	This only returns a non-zero value during the call to endOfLoop. More...

ScheduleInfo const *	scheduleInfo () const
	This returns a non-zero value after the constructor has been called. More...

Protected Member Functions inherited from edm::EDConsumerBase
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)

template<BranchType B = InEvent>
EDConsumerBaseAdaptor< B >	consumes (edm::InputTag tag) noexcept

EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)

ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...

template<typename ProductType , BranchType B = InEvent>
void	consumesMany ()

void	consumesMany (const TypeToGet &id)

template<BranchType B>
void	consumesMany (const TypeToGet &id)

template<typename ESProduct , typename ESRecord , Transition Tr = Transition::Event>
auto	esConsumes ()

template<typename ESProduct , typename ESRecord , Transition Tr = Transition::Event>
auto	esConsumes (ESInputTag const &tag)

template<Transition Tr = Transition::Event>
constexpr auto	esConsumes ()

template<Transition Tr = Transition::Event>
auto	esConsumes (ESInputTag tag)

template<Transition Tr = Transition::Event>
ESGetTokenGeneric	esConsumes (eventsetup::EventSetupRecordKey const &iRecord, eventsetup::DataKey const &iKey)
	Used with EventSetupRecord::doGet. More...

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)

EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

void	resetItemsToGetFrom (BranchType iType)

Detailed Description

Definition at line 48 of file FWFFLooper.h.

Member Typedef Documentation

typedef std::map<std::string, edm::ParameterSet> FWFFLooper::ModuleChanges

private

Definition at line 108 of file FWFFLooper.h.

Constructor & Destructor Documentation

FWFFLooper::FWFFLooper ( const edm::ParameterSet & ps )

Definition at line 116 of file FWFFLooper.cc.

References CmsShowMainBase::eiManager(), CmsShowMainBase::geometryFilename(), edm::ParameterSet::getUntrackedParameter(), loadDefaultGeometryFile(), m_context, m_MagField, m_metadataManager, m_navigator, CmsShowMainBase::setConfigFilename(), FWEventItemsManager::setContext(), CmsShowMainBase::setGeometryFilename(), CmsShowMainBase::setup(), and AlCaHLTBitMon_QueryRunRegistry::string.

     : CmsShowMainBase(),
       m_navigator(new FWFFNavigator(*this)),
       m_metadataManager(new FWFFMetadataManager()),
       m_context(new fireworks::Context(
           changeManager(), selectionManager(), eiManager(), colorManager(), m_metadataManager.get())),
       m_Rint(m_appHelper->app()),
       m_AllowStep(true),
       m_ShowEvent(true),
       m_firstTime(true),
       m_pathsGUI(nullptr),
       m_geomWatcher(this, &FWFFLooper::remakeGeometry),
       m_recoGeomToken(esConsumes()),
       m_runInfoToken(esConsumes()),
       m_displayGeomToken(esConsumes()) {
   setup(m_navigator.get(), m_context.get(), m_metadataManager.get());
 
   eiManager()->setContext(m_context.get());
 
   // By default, we look up geometry and configuration in the workarea, then
   // in the release area then in the local directory.  It is also possible to
   // override those locations by using the displayConfigurationFilename and
   // geometryFilename in the parameterset.
   const char* releaseBase = std::getenv("CMSSW_RELEASE_BASE");
   const char* workarea = std::getenv("CMSSW_BASE");
   std::string displayConfigRelFilename = "/src/Fireworks/FWInterface/macros/ffw.fwc";
   std::string geometryRelFilename = "/src/Fireworks/FWInterface/data/cmsGeom10.root";
 
   std::string displayConfigFilename = "ffw.fwc";
   std::string geometryFilename;
 
   if (releaseBase && access((releaseBase + displayConfigFilename).c_str(), R_OK) == 0)
     displayConfigFilename = releaseBase + displayConfigRelFilename;
   if (workarea && access((workarea + displayConfigRelFilename).c_str(), R_OK) == 0)
     displayConfigFilename = workarea + displayConfigRelFilename;
 
   if (releaseBase && access((releaseBase + geometryRelFilename).c_str(), R_OK) == 0)
     geometryFilename = releaseBase + geometryRelFilename;
   if (workarea && access((workarea + geometryRelFilename).c_str(), R_OK) == 0)
     geometryFilename = workarea + geometryRelFilename;
 
   displayConfigFilename = ps.getUntrackedParameter<std::string>("displayConfigFilename", displayConfigFilename);
   geometryFilename = ps.getUntrackedParameter<std::string>("geometryFilename", geometryFilename);
   if (!geometryFilename.empty()) {
     loadDefaultGeometryFile();
   }
   setGeometryFilename(geometryFilename);
   setConfigFilename(displayConfigFilename);
 
   if (!geometryFilename.empty()) {
     loadDefaultGeometryFile();
   }
 
   m_MagField = new CmsEveMagField();
 }

FWFFLooper::~FWFFLooper ( )

override

Definition at line 186 of file FWFFLooper.cc.

References m_MagField.

186 { delete m_MagField; }

FWFFLooper::m_MagField

TEveMagField * m_MagField

Definition: FWFFLooper.h:101

FWFFLooper::FWFFLooper ( const FWFFLooper & )

private

Member Function Documentation

void FWFFLooper::attachTo ( edm::ActivityRegistry & )

overridevirtual

Override this method if you need to monitor the state of the processing.

Reimplemented from edm::EDLooperBase.

Definition at line 178 of file FWFFLooper.cc.

References CmsShowMainBase::guiManager(), m_pathsGUI, postEndJob(), FWPathsPopup::postModuleEvent(), FWPathsPopup::preModuleEvent(), edm::ActivityRegistry::watchPostEndJob(), edm::ActivityRegistry::watchPostModuleEvent(), and edm::ActivityRegistry::watchPreModuleEvent().

                                                  {
   m_pathsGUI = new FWPathsPopup(this, guiManager());
 
   ar.watchPostModuleEvent(m_pathsGUI, &FWPathsPopup::postModuleEvent);
   ar.watchPreModuleEvent(m_pathsGUI, &FWPathsPopup::preModuleEvent);
   ar.watchPostEndJob(this, &FWFFLooper::postEndJob);
 }

void FWFFLooper::autoLoadNewEvent ( )

overridevirtual

This actually needs to be different from the standalone case because nextEvent() / previousEvent() will immediately interrupt the GUI event loop and fall back to the looper.

Implements CmsShowMainBase.

Definition at line 240 of file FWFFLooper.cc.

References FWGUIManager::enableActions(), CmsShowMainFrame::enableComplexNavigation(), CmsShowMainBase::forward(), FWGUIManager::getMainFrame(), CmsShowMainBase::guiManager(), CmsShowMainBase::loop(), m_autoReload, m_isFirstEvent, m_isLastEvent, m_navigator, CmsShowMainBase::stopAutoLoadTimer(), and CmsShowMainBase::stopPlaying().

                                   {
   stopAutoLoadTimer();
   bool reachedEnd = (forward() && m_isLastEvent) || (!forward() && m_isFirstEvent);
 
   if (!reachedEnd || loop()) {
     // Will exit the loop here!
     m_autoReload = true;
     forward() ? m_navigator->nextEvent() : m_navigator->previousEvent();
   } else {
     m_autoReload = false;
     CmsShowMainBase::stopPlaying();
     guiManager()->enableActions();
     guiManager()->getMainFrame()->enableComplexNavigation(false);
   }
 }

void FWFFLooper::beginRun	(	const edm::Run &	,
		const edm::EventSetup &
	)

overridevirtual

Called after all event modules have processed the begin of a Run.

Reimplemented from edm::EDLooperBase.

Definition at line 267 of file FWFFLooper.cc.

References edm::ESWatcher< T >::check(), CmsShowMainBase::context(), cppFunctionSkipper::exception, FWGUIManager::filterButtonClicked_, edm::EventSetup::find(), fwLog, edm::Run::getByLabel(), edm::EventSetup::getData(), fireworks::Context::getField(), CmsShowMainBase::getGeom(), CmsShowMainBase::guiManager(), FWGeometry::initMap(), edm::HandleBase::isValid(), fwlog::kInfo, CmsShowMainBase::loadGeometry(), m_autoReload, RunInfo::m_avg_current, m_context, m_firstTime, m_geomWatcher, m_MagField, m_recoGeomToken, m_runInfoToken, gpuVertexFinder::printf(), FWMagField::setFFFieldMag(), FWGUIManager::setFilterButtonText(), CmsShowMainBase::setGeometryFilename(), CmsShowMainBase::setupActions(), CmsShowMainBase::setupConfiguration(), CmsShowMainBase::setupViewManagers(), FWGUIManager::showEventFilterGUI(), FWGUIManager::showEventFilterGUI_, showPathsGUI(), and FWGUIManager::updateStatus().

                                                                          {
   // Check DisplayGeomRecord changes.
   try {
     m_geomWatcher.check(iSetup);
   } catch (...) {
   }
 
   // If the geometry was not picked up from a file, we try to get it from the
   // EventSetup!
   // FIXME: we need to check we execute only once because the view managers
   //        depend on geometry and they cannot be initialised more than once.
   //        This should actually be cleaned up so that the various view manager
   //        don't care about geometry.
   // FIXME: we should actually be able to update the geometry when requested.
   //        this is not possible at the moment.
   if (m_firstTime == true) {
     if (m_context->getGeom() == nullptr) {
       try {
         guiManager()->updateStatus("Loading geometry...");
         getGeom().initMap(iSetup.getData(m_recoGeomToken).idToName);
         m_context->setGeom(&(getGeom()));
       } catch (const cms::Exception& exception) {
         setGeometryFilename("cmsGeom10.root");
         CmsShowMainBase::loadGeometry();
       }
     }
 
     setupViewManagers();
     setupConfiguration();
     setupActions();
 
     guiManager()->showEventFilterGUI_.connect(std::bind(&FWFFLooper::showPathsGUI, this, std::placeholders::_1));
     guiManager()->setFilterButtonText("Show paths / CMSSW configuration editor");
     guiManager()->filterButtonClicked_.connect(std::bind(&FWGUIManager::showEventFilterGUI, guiManager()));
 
     m_firstTime = false;
     m_autoReload = false;
   }
 
   float current = 18160.0f;
   try {
     edm::Handle<edm::ConditionsInRunBlock> runCond;
     // bool res = iRun.getByType(runCond);
     bool res = iRun.getByLabel("conditionsInEdm", runCond);
     if (res && runCond.isValid()) {
       printf("Got current from conds in edm %f\n", runCond->BAvgCurrent);
       current = runCond->BAvgCurrent;
     } else {
       printf("Could not extract run-conditions get-result=%d, is-valid=%d\n", res, runCond.isValid());
 
       auto rec = iSetup.find(edm::eventsetup::EventSetupRecordKey::makeKey<RunInfoRcd>());
       if (rec) {
         RunInfo const& sum = iSetup.getData(m_runInfoToken);
 
         current = sum.m_avg_current;
         printf("Got current from RunInfoRcd %f\n", sum.m_avg_current);
       }
     }
   } catch (...) {
     fwLog(fwlog::kInfo) << "ConditionsInRunBlock not available\n";
   }
   static_cast<CmsEveMagField*>(m_MagField)->SetFieldByCurrent(current);
   context()->getField()->setFFFieldMag(m_MagField->GetMaxFieldMag());
 }

void FWFFLooper::checkPosition ( )

overridevirtual

Implements CmsShowMainBase.

Definition at line 218 of file FWFFLooper.cc.

References FWGUIManager::disableNext(), FWGUIManager::disablePrevious(), CSGAction::enable(), CmsShowMainFrame::enableComplexNavigation(), CmsShowMainFrame::enableNavigatorControls(), FWGUIManager::getMainFrame(), CmsShowMainBase::guiManager(), CmsShowMainBase::isPlaying(), CmsShowMainBase::loop(), m_isFirstEvent, m_isLastEvent, and FWGUIManager::playEventsAction().

Referenced by duringLoop(), and stopPlaying().

                                {
   if (loop() && isPlaying())
     return;
 
   guiManager()->getMainFrame()->enableNavigatorControls();
   guiManager()->getMainFrame()->enableComplexNavigation(false);
 
   if (m_isFirstEvent)
     guiManager()->disablePrevious();
 
   if (m_isLastEvent) {
     guiManager()->disableNext();
     // force enable play events action in --port mode
     if (!guiManager()->playEventsAction()->isEnabled())
       guiManager()->playEventsAction()->enable();
   }
 }

void FWFFLooper::display ( const std::string & info = "" )

Definition at line 390 of file FWFFLooper.cc.

References m_AllowStep, and m_Rint.

                                               {
   // Display whatever was registered so far, wait until user presses
   // the "Step" button.
 
   if (m_AllowStep) {
     gEve->Redraw3D();
     m_Rint->Run(kTRUE);
   }
 }

edm::EDLooperBase::Status FWFFLooper::duringLoop	(	const edm::Event &	,
		const edm::EventSetup &	,
		edm::ProcessingController &
	)

overridevirtual

Called after all event modules have had a chance to process the Event.

Implements edm::EDLooperBase.

Definition at line 333 of file FWFFLooper.cc.

References edm::ESWatcher< T >::check(), checkPosition(), CmsShowMainBase::draw(), edm::ProcessingController::forwardState(), FWPathsPopup::hasChanges(), edm::ProcessingController::kAtFirstEvent, edm::ProcessingController::kAtLastEvent, edm::EDLooperBase::kContinue, FWFFNavigator::kFirstEvent, FWFFNavigator::kLastEvent, FWFFNavigator::kNextEvent, FWFFNavigator::kPreviousEvent, edm::EDLooperBase::kStop, m_autoReload, m_geomWatcher, m_isFirstEvent, m_isLastEvent, m_metadataManager, m_navigator, m_nextEventId, m_pathsGUI, m_Rint, FWPathsPopup::postEvent(), edm::ProcessingController::reverseState(), edm::ProcessingController::setTransitionToEvent(), edm::ProcessingController::setTransitionToNextEvent(), edm::ProcessingController::setTransitionToPreviousEvent(), and CmsShowMainBase::startAutoLoadTimer().

                                                                                       {
   // Check DisplayGeomRecord changes.
   try {
     m_geomWatcher.check(es);
   } catch (...) {
   }
 
   m_pathsGUI->postEvent(event);
 
   m_isLastEvent = controller.forwardState() == edm::ProcessingController::kAtLastEvent;
   m_isFirstEvent = controller.reverseState() == edm::ProcessingController::kAtFirstEvent;
   // If the next event id is valid, set the transition so
   // that we go to it go to to it.
   if (m_nextEventId != edm::EventID()) {
     controller.setTransitionToEvent(m_nextEventId);
     m_nextEventId = edm::EventID();
     return kContinue;
   }
   // We handle "last event" by going to the first event and then moving to the
   // previous event.
   if (m_navigator->currentTransition() == FWFFNavigator::kLastEvent) {
     m_navigator->resetTransition();
     controller.setTransitionToPreviousEvent();
     return kContinue;
   }
 
   m_pathsGUI->hasChanges() = false;
   m_metadataManager->update(new FWFFMetadataUpdateRequest(event));
   m_navigator->setCurrentEvent(&event);
   if (m_autoReload == true)
     startAutoLoadTimer();
 
   checkPosition();
   draw();
 
   m_Rint->Run(kTRUE);
   // If the GUI changed the PSet, save the current event to reload
   // it on next iteration.
   if (m_pathsGUI->hasChanges()) {
     m_nextEventId = edm::EventID();
     return kStop;
   } else if (m_navigator->currentTransition() == FWFFNavigator::kFirstEvent) {
     m_nextEventId = m_navigator->getFirstEventID();
     return kStop;
   } else if (m_navigator->currentTransition() == FWFFNavigator::kLastEvent) {
     m_nextEventId = m_navigator->getFirstEventID();
     return kStop;
   } else if (m_navigator->currentTransition() == FWFFNavigator::kNextEvent)
     controller.setTransitionToNextEvent();
   else if (m_navigator->currentTransition() == FWFFNavigator::kPreviousEvent)
     controller.setTransitionToPreviousEvent();
   return kContinue;
 }

edm::EDLooperBase::Status FWFFLooper::endOfLoop	(	const edm::EventSetup &	,
		unsigned int
	)

overridevirtual

This is called at the end of looping. We always continue because we want the transition set in the ProcessingController to happen.

Implements edm::EDLooperBase.

Definition at line 423 of file FWFFLooper.cc.

References EcnaPython_AdcPeg12_S1_10_R170298_1_0_150_Dee0::cerr, edm::ModuleChanger::changeModule(), alignCSCRings::e, fwLog, mps_fire::i, edm::EDLooperBase::kContinue, fwlog::kError, m_scheduledChanges, edm::EDLooperBase::moduleChanger(), and cms::Exception::what().

                                                                               {
   // Looks like the module changer is availble only here.
   for (ModuleChanges::iterator i = m_scheduledChanges.begin(), e = m_scheduledChanges.end(); i != e; ++i) {
     try {
       moduleChanger()->changeModule(i->first, i->second);
     } catch (cms::Exception const& e) {
       fwLog(fwlog::kError) << "FWFFLooper::endOfLoop caught exception.\n";
       std::cerr << e.what() << std::endl;
     }
   }
   m_scheduledChanges.clear();
   return kContinue;
 }

TEveMagField * FWFFLooper::getMagField ( )

Definition at line 404 of file FWFFLooper.cc.

References m_MagField.

404 { return m_MagField; }

FWFFLooper::m_MagField

TEveMagField * m_MagField

Definition: FWFFLooper.h:101

void FWFFLooper::loadDefaultGeometryFile ( void )

private

Definition at line 172 of file FWFFLooper.cc.

References CmsShowTaskExecutor::addTask(), validate-o2o-wbm::f, CmsShowMainBase::loadGeometry(), and CmsShowMainBase::startupTasks().

Referenced by FWFFLooper().

                                              {
   CmsShowTaskExecutor::TaskFunctor f;
   f = std::bind(&CmsShowMainBase::loadGeometry, this);
   startupTasks()->addTask(f);
 }

const FWFFLooper& FWFFLooper::operator= ( const FWFFLooper & )

private

void FWFFLooper::postBeginJob ( )

void FWFFLooper::postEndJob ( )

Definition at line 213 of file FWFFLooper.cc.

References gpuVertexFinder::printf().

Referenced by attachTo().

                             {
   printf("FWFFLooper::postEndJob\n");
   TEveManager::Terminate();
 }

void FWFFLooper::quit ( )

overridevirtual

Implements CmsShowMainBase.

Definition at line 408 of file FWFFLooper.cc.

                       {
   gSystem->ExitLoop();
 
   // Throwing exception here is bad because:
   //   a) it does not work when in a "debug step";
   //   b) does not restore terminal state.
   // So we do exit instead for now.
   // throw cms::Exception("UserTerminationRequest");
   gSystem->Exit(0);
 }

void FWFFLooper::remakeGeometry ( const DisplayGeomRecord & dgRec )

Definition at line 455 of file FWFFLooper.cc.

References fwLog, edm::eventsetup::DependentRecordImplementation< RecordT, ListT >::get(), fwlog::kInfo, m_displayGeomToken, and FWGeometryTableViewManager::setGeoManagerRuntime().

                                                               {
   fwLog(fwlog::kInfo) << "FWFFLooper set TGeo geometry from DisplayGeomRecord.\n";
 
   TEveGeoManagerHolder _tgeo(const_cast<TGeoManager*>(&dgRec.get(m_displayGeomToken)));
   FWGeometryTableViewManager::setGeoManagerRuntime(gGeoManager);
 }

void FWFFLooper::requestChanges	(	const std::string &	moduleLabel,
		const edm::ParameterSet &	ps
	)

Definition at line 449 of file FWFFLooper.cc.

References m_scheduledChanges.

Referenced by FWPathsPopup::scheduleReloadEvent().

                                                                                        {
   m_scheduledChanges[moduleLabel] = ps;
 }

void FWFFLooper::setupFieldForPropagator ( TEveTrackPropagator * prop )

Definition at line 406 of file FWFFLooper.cc.

References m_MagField.

406 { prop->SetMagFieldObj(m_MagField, kFALSE); }

FWFFLooper::m_MagField

TEveMagField * m_MagField

Definition: FWFFLooper.h:101

void FWFFLooper::showPathsGUI ( const TGWindow * p )

Definition at line 437 of file FWFFLooper.cc.

References CmsShowMainBase::guiManager(), m_pathsGUI, and FWGUIManager::setFilterButtonText().

Referenced by beginRun().

                                              {
   if (!m_pathsGUI)
     return;
   if (m_pathsGUI->IsMapped()) {
     guiManager()->setFilterButtonText("Show paths / CMSSW configuration editor");
     m_pathsGUI->UnmapWindow();
   } else {
     guiManager()->setFilterButtonText("Hide paths / CMSSW configuration editor");
     m_pathsGUI->MapWindow();
   }
 }

void FWFFLooper::startingNewLoop ( unsigned int )

overridevirtual

Called before system starts to loop over the events. The argument is a count of how many loops have been processed. For the first time through the events the argument will be 0.

Implements edm::EDLooperBase.

Definition at line 192 of file FWFFLooper.cc.

References CmsShowTaskExecutor::addTask(), cms::cuda::assert(), validate-o2o-wbm::f, info(), m_pathsGUI, m_Rint, edm::EDLooperBase::scheduleInfo(), FWPathsPopup::setup(), CmsShowTaskExecutor::startDoingTasks(), and CmsShowMainBase::startupTasks().

                                                    {
   // Initialise on first loop.
   if (count == 0) {
     const edm::ScheduleInfo* info = scheduleInfo();
     m_pathsGUI->setup(info);
 
     // We need to enter the GUI loop in order to
     // have all the callbacks executed. The last callback will
     // be responsible for returning the control to CMSSW.
     assert(m_Rint);
     CmsShowTaskExecutor::TaskFunctor f;
     f = std::bind(&TApplication::Terminate, m_Rint, 0);
     startupTasks()->addTask(f);
     // FIXME: do we really need to delay tasks like this?
     startupTasks()->startDoingTasks();
     m_Rint->Run(kTRUE);
     // Show the GUI ...
     gSystem->ProcessEvents();
   }
 }

void FWFFLooper::stopPlaying ( )

overridevirtual

Reimplemented from CmsShowMainBase.

Definition at line 256 of file FWFFLooper.cc.

References checkPosition(), FWGUIManager::enableActions(), CmsShowMainFrame::enableComplexNavigation(), FWGUIManager::getMainFrame(), CmsShowMainBase::guiManager(), m_autoReload, CmsShowMainBase::stopAutoLoadTimer(), and CmsShowMainBase::stopPlaying().

                              {
   stopAutoLoadTimer();
   m_autoReload = false;
   CmsShowMainBase::stopPlaying();
   guiManager()->enableActions();
   guiManager()->getMainFrame()->enableComplexNavigation(false);
   checkPosition();
 }