TrackerGeomBuilderFromGeometricDet.cc

Go to the documentation of this file.

#include "Geometry/TrackerGeometryBuilder/interface/TrackerGeomBuilderFromGeometricDet.h"
#include "Geometry/TrackerGeometryBuilder/interface/TrackerGeometry.h"
#include "Geometry/TrackerGeometryBuilder/interface/PlaneBuilderForGluedDet.h"
#include "Geometry/CommonDetUnit/interface/GeomDet.h"
#include "Geometry/CommonDetUnit/interface/GluedGeomDet.h"
#include "Geometry/CommonDetUnit/interface/StackGeomDet.h"
#include "Geometry/CommonDetUnit/interface/PixelGeomDetType.h"
#include "Geometry/CommonDetUnit/interface/PixelGeomDetUnit.h"
#include "Geometry/TrackerGeometryBuilder/interface/StripGeomDetType.h"
#include "Geometry/TrackerGeometryBuilder/interface/StripGeomDetUnit.h"
#include "Geometry/TrackerGeometryBuilder/interface/PixelTopologyBuilder.h"
#include "Geometry/TrackerGeometryBuilder/interface/StripTopologyBuilder.h"
#include "CondFormats/GeometryObjects/interface/PTrackerParameters.h"
#include "CondFormats/GeometryObjects/interface/PTrackerAdditionalParametersPerDet.h"
#include "DataFormats/DetId/interface/DetId.h"
#include "DataFormats/TrackerCommon/interface/TrackerTopology.h"
#include "DataFormats/GeometrySurface/interface/MediumProperties.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"
#include "FWCore/Utilities/interface/Exception.h"

#include <cfloat>
#include <cassert>
using std::string;
using std::vector;

namespace {
  void verifyDUinTG(TrackerGeometry const& tg) {
    int off = 0;
    int end = 0;
    for (int i = 1; i != 7; i++) {
      auto det = GeomDetEnumerators::tkDetEnum[i];
      off = tg.offsetDU(det);
      end = tg.endsetDU(det);
      assert(end >= off);  // allow empty subdetectors. Needed for upgrade
      for (int j = off; j != end; ++j) {
        assert(tg.detUnits()[j]->geographicalId().subdetId() == i);
        assert(GeomDetEnumerators::subDetGeom[tg.detUnits()[j]->subDetector()] == det);
        assert(tg.detUnits()[j]->index() == j);
      }
    }
  }
}  // namespace

TrackerGeometry* TrackerGeomBuilderFromGeometricDet::build(const GeometricDet* gd,
                                                           const PTrackerAdditionalParametersPerDet* ptitpx,
                                                           const PTrackerParameters& ptp,
                                                           const TrackerTopology* tTopo) {
  if (ptp.vpars.size() != 6) {
    throw cms::Exception("TrackerGeomBuilderFromGeometricDet")
        << "Tracker parameters block from XMLs called vPars is expected to have 6 entries, but has " << ptp.vpars.size()
        << " entrie(s).";
  }

  const int BIG_PIX_PER_ROC_X = ptp.vpars[2];
  const int BIG_PIX_PER_ROC_Y = ptp.vpars[3];

  thePixelDetTypeMap.clear();
  theStripDetTypeMap.clear();

  TrackerGeometry* tracker = new TrackerGeometry(gd);
  std::vector<const GeometricDet*> comp;
  gd->deepComponents(comp);

  if (tTopo)
    theTopo = tTopo;

  //define a vector which associate to the detid subdetector index -1 (from 0 to 5) the GeometridDet enumerator to be able to know which type of subdetector it is

  std::vector<GeometricDet::GDEnumType> gdsubdetmap(
      6, GeometricDet::unknown);  // hardcoded "6" should not be a surprise...
  GeometricDet::ConstGeometricDetContainer subdetgd = gd->components();

  LogDebug("SubDetectorGeometricDetType") << "GeometriDet enumerator values of the subdetectors";
  for (unsigned int i = 0; i < subdetgd.size(); ++i) {
    assert(subdetgd[i]->geographicalId().subdetId() > 0 && subdetgd[i]->geographicalId().subdetId() < 7);
    gdsubdetmap[subdetgd[i]->geographicalId().subdetId() - 1] = subdetgd[i]->type();
    LogTrace("SubDetectorGeometricDetType")
        << "subdet " << i << " type " << subdetgd[i]->type() << " detid " << subdetgd[i]->geographicalId().rawId()
        << " subdetid " << subdetgd[i]->geographicalId().subdetId();
  }

  std::vector<const GeometricDet*> dets[6];
  std::vector<const GeometricDet*>& pixB = dets[0];
  pixB.reserve(comp.size());
  std::vector<const GeometricDet*>& pixF = dets[1];
  pixF.reserve(comp.size());
  std::vector<const GeometricDet*>& tib = dets[2];
  tib.reserve(comp.size());
  std::vector<const GeometricDet*>& tid = dets[3];
  tid.reserve(comp.size());
  std::vector<const GeometricDet*>& tob = dets[4];
  tob.reserve(comp.size());
  std::vector<const GeometricDet*>& tec = dets[5];
  tec.reserve(comp.size());

  for (auto& i : comp)
    dets[i->geographicalId().subdetId() - 1].emplace_back(i);

  //loop on all the six elements of dets and firstly check if they are from pixel-like detector and call buildPixel, then loop again and check if they are strip and call buildSilicon. "unknown" can be filled either way but the vector of GeometricDet must be empty !!
  // this order is VERY IMPORTANT!!!!! For the moment I (AndreaV) understand that some pieces of code rely on pixel-like being before strip-like

  // now building the Pixel-like subdetectors
  for (unsigned int i = 0; i < 6; ++i) {
    if (gdsubdetmap[i] == GeometricDet::PixelBarrel)
      buildPixel(dets[i],
                 ptitpx,
                 tracker,
                 GeomDetEnumerators::SubDetector::PixelBarrel,
                 false,
                 BIG_PIX_PER_ROC_X,
                 BIG_PIX_PER_ROC_Y);
    if (gdsubdetmap[i] == GeometricDet::PixelPhase1Barrel)
      buildPixel(
          dets[i], ptitpx, tracker, GeomDetEnumerators::SubDetector::P1PXB, false, BIG_PIX_PER_ROC_X, BIG_PIX_PER_ROC_Y);
    // Phase2 case
    if (gdsubdetmap[i] == GeometricDet::PixelPhase2Barrel)
      buildPixel(
          dets[i], ptitpx, tracker, GeomDetEnumerators::SubDetector::P2PXB, true, BIG_PIX_PER_ROC_X, BIG_PIX_PER_ROC_Y);
    //
    if (gdsubdetmap[i] == GeometricDet::PixelEndCap)
      buildPixel(dets[i],
                 ptitpx,
                 tracker,
                 GeomDetEnumerators::SubDetector::PixelEndcap,
                 false,
                 BIG_PIX_PER_ROC_X,
                 BIG_PIX_PER_ROC_Y);
    if (gdsubdetmap[i] == GeometricDet::PixelPhase1EndCap)
      buildPixel(dets[i],
                 ptitpx,
                 tracker,
                 GeomDetEnumerators::SubDetector::P1PXEC,
                 false,
                 BIG_PIX_PER_ROC_X,
                 BIG_PIX_PER_ROC_Y);
    if (gdsubdetmap[i] == GeometricDet::PixelPhase2EndCap)
      buildPixel(
          dets[i], ptitpx, tracker, GeomDetEnumerators::SubDetector::P2PXEC, true, BIG_PIX_PER_ROC_X, BIG_PIX_PER_ROC_Y);
    if (gdsubdetmap[i] == GeometricDet::OTPhase2Barrel)
      buildPixel(
          dets[i], ptitpx, tracker, GeomDetEnumerators::SubDetector::P2OTB, true, BIG_PIX_PER_ROC_X, BIG_PIX_PER_ROC_Y);
    if (gdsubdetmap[i] == GeometricDet::OTPhase2EndCap)
      buildPixel(
          dets[i], ptitpx, tracker, GeomDetEnumerators::SubDetector::P2OTEC, true, BIG_PIX_PER_ROC_X, BIG_PIX_PER_ROC_Y);
  }
  //now building Strips
  for (unsigned int i = 0; i < 6; ++i) {
    if (gdsubdetmap[i] == GeometricDet::TIB)
      buildSilicon(dets[i], tracker, GeomDetEnumerators::SubDetector::TIB, "barrel");
    if (gdsubdetmap[i] == GeometricDet::TID)
      buildSilicon(dets[i], tracker, GeomDetEnumerators::SubDetector::TID, "endcap");
    if (gdsubdetmap[i] == GeometricDet::TOB)
      buildSilicon(dets[i], tracker, GeomDetEnumerators::SubDetector::TOB, "barrel");
    if (gdsubdetmap[i] == GeometricDet::TEC)
      buildSilicon(dets[i], tracker, GeomDetEnumerators::SubDetector::TEC, "endcap");
  }
  // and finally the "empty" subdetectors (maybe it is not needed)
  for (unsigned int i = 0; i < 6; ++i) {
    if (gdsubdetmap[i] == GeometricDet::unknown) {
      if (!dets[i].empty())
        throw cms::Exception("NotEmptyUnknownSubDet")
            << "Subdetector " << i + 1 << " is unknown but it is not empty: " << dets[i].size();
      buildSilicon(
          dets[i], tracker, GeomDetEnumerators::tkDetEnum[i + 1], "barrel");  // "barrel" is used but it is irrelevant
    }
  }
  buildGeomDet(tracker);  //"GeomDet"

  verifyDUinTG(*tracker);

  return tracker;
}

void TrackerGeomBuilderFromGeometricDet::buildPixel(
    std::vector<const GeometricDet*> const& gdv,
    const PTrackerAdditionalParametersPerDet* const& ptitp,
    TrackerGeometry* tracker,
    GeomDetType::SubDetector det,
    bool upgradeGeometry,
    int BIG_PIX_PER_ROC_X,  // in x direction, rows. BIG_PIX_PER_ROC_X = 0 for SLHC
    int BIG_PIX_PER_ROC_Y)  // in y direction, cols. BIG_PIX_PER_ROC_Y = 0 for SLHC
{
  LogDebug("BuildingGeomDetUnits") << " Pixel type. Size of vector: " << gdv.size()
                                   << " GeomDetType subdetector: " << det
                                   << " logical subdetector: " << GeomDetEnumerators::subDetGeom[det]
                                   << " big pix per ROC x: " << BIG_PIX_PER_ROC_X << " y: " << BIG_PIX_PER_ROC_Y
                                   << " is upgrade: " << upgradeGeometry;

  tracker->setOffsetDU(GeomDetEnumerators::subDetGeom[det]);

  std::map<DetId, bool> brickedness_map;

  std::vector<bool> brickedParams = ptitp->getAllBricked();
  std::vector<int> geographicalIdParams = ptitp->getAllGeographicalIds();

  for (unsigned int i = 0; i < geographicalIdParams.size(); i++) {
    brickedness_map[geographicalIdParams.at(i)] = brickedParams.at(i);
  }

  for (auto const& i : gdv) {
    std::string const& detName = i->name();
    if (thePixelDetTypeMap.find(detName) == thePixelDetTypeMap.end()) {
      std::unique_ptr<const Bounds> bounds(i->bounds());
      PixelTopology* t = PixelTopologyBuilder().build(bounds.get(),
                                                      upgradeGeometry,
                                                      brickedness_map[i->geographicalId()],
                                                      (int)i->pixROCRows(),
                                                      (int)i->pixROCCols(),
                                                      BIG_PIX_PER_ROC_X,
                                                      BIG_PIX_PER_ROC_Y,
                                                      (int)i->pixROCx(),
                                                      (int)i->pixROCy());

      thePixelDetTypeMap[detName] = new PixelGeomDetType(t, detName, det);
      tracker->addType(thePixelDetTypeMap[detName]);
    }

    PlaneBuilderFromGeometricDet::ResultType plane = buildPlaneWithMaterial(i);
    GeomDetUnit* temp = new PixelGeomDetUnit(&(*plane), thePixelDetTypeMap[detName], i->geographicalId());

    tracker->addDetUnit(temp);
    tracker->addDetUnitId(i->geographicalId());
  }
  tracker->setEndsetDU(GeomDetEnumerators::subDetGeom[det]);
}

void TrackerGeomBuilderFromGeometricDet::buildSilicon(std::vector<const GeometricDet*> const& gdv,
                                                      TrackerGeometry* tracker,
                                                      GeomDetType::SubDetector det,
                                                      const std::string& part) {
  LogDebug("BuildingGeomDetUnits") << " Strip type. Size of vector: " << gdv.size()
                                   << " GeomDetType subdetector: " << det
                                   << " logical subdetector: " << GeomDetEnumerators::subDetGeom[det] << " part "
                                   << part;

  tracker->setOffsetDU(GeomDetEnumerators::subDetGeom[det]);

  for (auto const& i : gdv) {
    std::string const& detName = i->name();
    if (theStripDetTypeMap.find(detName) == theStripDetTypeMap.end()) {
      std::unique_ptr<const Bounds> bounds(i->bounds());
      StripTopology* t = StripTopologyBuilder().build(bounds.get(), i->siliconAPVNum(), part);
      theStripDetTypeMap[detName] = new StripGeomDetType(t, detName, det, i->stereo());
      tracker->addType(theStripDetTypeMap[detName]);
    }

    double scale = (theTopo->partnerDetId(i->geographicalId())) ? 0.5 : 1.0;

    PlaneBuilderFromGeometricDet::ResultType plane = buildPlaneWithMaterial(i, scale);
    GeomDetUnit* temp = new StripGeomDetUnit(&(*plane), theStripDetTypeMap[detName], i->geographicalId());

    tracker->addDetUnit(temp);
    tracker->addDetUnitId(i->geographicalId());
  }
  tracker->setEndsetDU(GeomDetEnumerators::subDetGeom[det]);
}

void TrackerGeomBuilderFromGeometricDet::buildGeomDet(TrackerGeometry* tracker) {
  PlaneBuilderForGluedDet gluedplaneBuilder;
  auto const& gdu = tracker->detUnits();
  auto const& gduId = tracker->detUnitIds();

  for (u_int32_t i = 0; i < gdu.size(); i++) {
    tracker->addDet(gdu[i]);
    tracker->addDetId(gduId[i]);
    string gduTypeName = gdu[i]->type().name();

    //this step is time consuming >> TO FIX with a MAP?
    if ((gduTypeName.find("Ster") != std::string::npos || gduTypeName.find("Lower") != std::string::npos) &&
        (theTopo->glued(gduId[i]) != 0 || theTopo->stack(gduId[i]) != 0)) {
      int partner_pos = -1;
      for (u_int32_t jj = 0; jj < gduId.size(); jj++) {
        if (theTopo->partnerDetId(gduId[i]) == gduId[jj]) {
          partner_pos = jj;
          break;
        }
      }
      if (partner_pos == -1) {
        throw cms::Exception("Configuration") << "Module Type is Stereo or Lower but no partner detector found \n"
                                              << "There is a problem on Tracker geometry configuration\n";
      }

      const GeomDetUnit* dus = gdu[i];
      const GeomDetUnit* dum = gdu[partner_pos];
      std::vector<const GeomDetUnit*> composed(2);
      composed[0] = dum;
      composed[1] = dus;
      DetId composedDetId;
      if (gduTypeName.find("Ster") != std::string::npos) {
        PlaneBuilderForGluedDet::ResultType plane = gluedplaneBuilder.plane(composed);
        composedDetId = theTopo->glued(gduId[i]);
        GluedGeomDet* gluedDet = new GluedGeomDet(&(*plane), dum, dus, composedDetId);
        tracker->addDet((GeomDet*)gluedDet);
        tracker->addDetId(composedDetId);

      } else if (gduTypeName.find("Lower") != std::string::npos) {
        //The plane is *not* built in the middle, but on the Lower surface
        Plane* plane = new Plane(dus->surface());
        composedDetId = theTopo->stack(gduId[i]);
        StackGeomDet* stackDet = new StackGeomDet(&(*plane), dus, dum, composedDetId);
        tracker->addDet((GeomDet*)stackDet);
        tracker->addDetId(composedDetId);
      }
    }
  }
}

PlaneBuilderFromGeometricDet::ResultType TrackerGeomBuilderFromGeometricDet::buildPlaneWithMaterial(
    const GeometricDet* gd, double scale) const {
  PlaneBuilderFromGeometricDet planeBuilder;
  PlaneBuilderFromGeometricDet::ResultType plane = planeBuilder.plane(gd);
  //
  // set medium properties (if defined)
  //
  plane->setMediumProperties(MediumProperties(gd->radLength() * scale, gd->xi() * scale));

  return plane;
}