#include <PseudoBayesGrouping.h>

Inheritance diagram for PseudoBayesGrouping:

Classes
struct	CandPointGreat

Public Member Functions
void	finish () override

void	initialise (const edm::EventSetup &iEventSetup) override

	PseudoBayesGrouping (const edm::ParameterSet &pset, edm::ConsumesCollector &iC)

void	run (edm::Event &iEvent, const edm::EventSetup &iEventSetup, const DTDigiCollection &digis, MuonPathPtrs &outMpath) override

	~PseudoBayesGrouping () override

Public Member Functions inherited from MotherGrouping
	MotherGrouping (const edm::ParameterSet &pset, edm::ConsumesCollector &iC)

virtual	~MotherGrouping ()

Private Member Functions
void	CleanDigisByLayer ()

void	FillDigisByLayer (const DTDigiCollection *digis)

void	FillMuonPaths (MuonPathPtrs &mpaths)

void	LoadPattern (TString pattern_file_name, int MB_number_input, int SL_shift)

void	ReCleanPatternsAndDigis ()

void	RecognisePatterns (std::vector< DTPrimitive > digisinLDown, std::vector< DTPrimitive > digisinLUp, dtbayesam::DTPatternPtrs patterns)

void	RecognisePatternsByLayerPairs (DTChamberId chamber_ID)

Private Attributes
std::vector< DTPrimitive >	alldigis_

std::unique_ptr < dtbayesam::CandidateGroupPtrs >	allMatches_

bool	allowDuplicates_

int	allowedVariance_

bool	allowUncorrelatedPatterns_

dtbayesam::DTPatternPtrs	allPatterns_ [4][3]

bool	debug_

std::vector< DTPrimitive >	digisinL0_

std::vector< DTPrimitive >	digisinL1_

std::vector< DTPrimitive >	digisinL2_

std::vector< DTPrimitive >	digisinL3_

std::vector< DTPrimitive >	digisinL4_

std::vector< DTPrimitive >	digisinL5_

std::vector< DTPrimitive >	digisinL6_

std::vector< DTPrimitive >	digisinL7_

std::unique_ptr < dtbayesam::CandidateGroupPtrs >	finalMatches_

dtbayesam::DTPatternPtrs	L0L1Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L0L2Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L0L3Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L0L4Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L0L5Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L0L6Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L0L7Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L1L2Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L1L3Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L1L4Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L1L5Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L1L6Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L1L7Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L2L3Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L2L4Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L2L5Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L2L6Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L2L7Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L3L4Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L3L5Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L3L6Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L3L7Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L4L5Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L4L6Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L4L7Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L5L6Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L5L7Patterns_ [4][3]

dtbayesam::DTPatternPtrs	L6L7Patterns_ [4][3]

uint	maxPathsPerMatch_

int	minNLayerHits_

int	minSingleSLHitsMax_

int	minSingleSLHitsMin_

int	minUncorrelatedHits_

int	nPatterns_

std::string	pattern_filename_

int	pidx_

std::unique_ptr < dtbayesam::CandidateGroupPtrs >	prelimMatches_

bool	saveOnPlace_

bool	setLateralities_

Detailed Description

Definition at line 13 of file PseudoBayesGrouping.h.

Constructor & Destructor Documentation

PseudoBayesGrouping::PseudoBayesGrouping	(	const edm::ParameterSet &	pset,
		edm::ConsumesCollector &	iC
	)

Definition at line 18 of file PseudoBayesGrouping.cc.

References allowDuplicates_, allowedVariance_, allowUncorrelatedPatterns_, debug_, contentValuesFiles::fullPath, edm::ParameterSet::getUntrackedParameter(), LogDebug, maxPathsPerMatch_, minNLayerHits_, minSingleSLHitsMax_, minSingleSLHitsMin_, minUncorrelatedHits_, pattern_filename_, saveOnPlace_, and setLateralities_.

     : MotherGrouping(pset, iC) {
   // Obtention of parameters
   debug_ = pset.getUntrackedParameter<bool>("debug");
   pattern_filename_ = pset.getUntrackedParameter<edm::FileInPath>("pattern_filename").fullPath();
   minNLayerHits_ = pset.getUntrackedParameter<int>("minNLayerHits");
   minSingleSLHitsMax_ = pset.getUntrackedParameter<int>("minSingleSLHitsMax");
   minSingleSLHitsMin_ = pset.getUntrackedParameter<int>("minSingleSLHitsMin");
   allowedVariance_ = pset.getUntrackedParameter<int>("allowedVariance");
   allowDuplicates_ = pset.getUntrackedParameter<bool>("allowDuplicates");
   allowUncorrelatedPatterns_ = pset.getUntrackedParameter<bool>("allowUncorrelatedPatterns");
   minUncorrelatedHits_ = pset.getUntrackedParameter<int>("minUncorrelatedHits");
   maxPathsPerMatch_ = pset.getUntrackedParameter<int>("maxPathsPerMatch");
   saveOnPlace_ = pset.getUntrackedParameter<bool>("saveOnPlace");
   setLateralities_ = pset.getUntrackedParameter<bool>("setLateralities");
   if (debug_)
     LogDebug("PseudoBayesGrouping") << "PseudoBayesGrouping:: constructor";
 }

PseudoBayesGrouping::~PseudoBayesGrouping ( )

override

Definition at line 37 of file PseudoBayesGrouping.cc.

References debug_, and LogDebug.

                                           {
   if (debug_)
     LogDebug("PseudoBayesGrouping") << "PseudoBayesGrouping:: destructor";
 }

Member Function Documentation

void PseudoBayesGrouping::CleanDigisByLayer ( )

private

Definition at line 590 of file PseudoBayesGrouping.cc.

References alldigis_, allMatches_, digisinL0_, digisinL1_, digisinL2_, digisinL3_, digisinL4_, digisinL5_, digisinL6_, digisinL7_, finalMatches_, and prelimMatches_.

Referenced by run().

                                             {
   digisinL0_.clear();
   digisinL1_.clear();
   digisinL2_.clear();
   digisinL3_.clear();
   digisinL4_.clear();
   digisinL5_.clear();
   digisinL6_.clear();
   digisinL7_.clear();
   alldigis_.clear();
   allMatches_->clear();
   prelimMatches_->clear();
   finalMatches_->clear();
 }

void PseudoBayesGrouping::FillDigisByLayer ( const DTDigiCollection * digis )

private

Definition at line 505 of file PseudoBayesGrouping.cc.

References alldigis_, debug_, digisinL0_, digisinL1_, digisinL2_, digisinL3_, digisinL4_, digisinL5_, digisinL6_, digisinL7_, DTLayerId::layer(), phase1PixelTopology::layer, LogDebug, DetId::rawId(), DTPrimitive::setCameraId(), DTPrimitive::setChannelId(), DTPrimitive::setLayerId(), DTPrimitive::setSuperLayerId(), DTPrimitive::setTDCTimeStamp(), and DTSuperLayerId::superlayer().

Referenced by run().

                                                                         {
   //First we need to have separated lists of digis by layer
   if (debug_)
     LogDebug("PseudoBayesGrouping") << "PseudoBayesGrouping::FillDigisByLayer Classifying digis by layer";
   //  for (auto dtDigi_It = digis->begin(); dtDigi_It != digis->end(); dtDigi_It++) {
   for (const auto& dtDigi_It : *digis) {
     const DTLayerId dtLId = dtDigi_It.first;
     //Skip digis in SL theta which we are not interested on for the grouping
     for (auto digiIt = (dtDigi_It.second).first; digiIt != (dtDigi_It.second).second; digiIt++) {
       //Need to change notation slightly here
       if (dtLId.superlayer() == 2)
         continue;
       int layer = dtLId.layer() - 1;
       if (dtLId.superlayer() == 3)
         layer += 4;
       //Use the same format as for InitialGrouping to avoid tons of replicating classes, we will have some not used variables
       DTPrimitive dtpAux = DTPrimitive();
       dtpAux.setTDCTimeStamp(digiIt->time());
       dtpAux.setChannelId(digiIt->wire() - 1);
       dtpAux.setLayerId(layer);
       dtpAux.setSuperLayerId(dtLId.superlayer());
       dtpAux.setCameraId(dtLId.rawId());
       if (debug_)
         LogDebug("PseudoBayesGrouping") << "Hit in L " << layer << " SL " << dtLId.superlayer() << " WIRE "
                                         << digiIt->wire() - 1;
       if (layer == 0)
         digisinL0_.push_back(dtpAux);
       else if (layer == 1)
         digisinL1_.push_back(dtpAux);
       else if (layer == 2)
         digisinL2_.push_back(dtpAux);
       else if (layer == 3)
         digisinL3_.push_back(dtpAux);
       else if (layer == 4)
         digisinL4_.push_back(dtpAux);
       else if (layer == 5)
         digisinL5_.push_back(dtpAux);
       else if (layer == 6)
         digisinL6_.push_back(dtpAux);
       else if (layer == 7)
         digisinL7_.push_back(dtpAux);
       alldigis_.push_back(dtpAux);
     }
   }
 }

void PseudoBayesGrouping::FillMuonPaths ( MuonPathPtrs & mpaths )

private

Definition at line 238 of file PseudoBayesGrouping.cc.

References allowedVariance_, debug_, finalMatches_, mps_fire::i, dqmiolumiharvest::j, cmsdt::LEFT, LogDebug, maxPathsPerMatch_, NONE, cmsdt::NUM_LAYERS_2SL, funct::pow(), cmsdt::RIGHT, saveOnPlace_, setLateralities_, and contentValuesCheck::ss.

Referenced by run().

                                                             {
   //Loop over all selected candidates
   for (auto itCand = finalMatches_->begin(); itCand != finalMatches_->end(); itCand++) {
     if (debug_)
       LogDebug("PseudoBayesGrouping") << "PseudoBayesGrouping::run Create pointers ";
 
     // Vector of all muon paths we may find
     std::vector<DTPrimitivePtrs> ptrPrimitive_vector;
 
     // We will have at least one muon path
     DTPrimitivePtrs ptrPrimitive;
     for (int i = 0; i < 8; i++)
       ptrPrimitive.push_back(std::make_shared<DTPrimitive>());
 
     ptrPrimitive_vector.push_back(ptrPrimitive);
 
     qualitybits qualityDTP;
     qualitybits qualityDTP2;
     int intHit = 0;
 
     //And for each candidate loop over all grouped hits
     for (auto& itDTP : (*itCand)->candHits()) {
       if (debug_)
         LogDebug("PseudoBayesGrouping") << "PseudoBayesGrouping::run loop over dt hits to fill pointer";
 
       int layerHit = (*itDTP).layerId();
       //Back to the usual basis for SL
       if (layerHit >= 4) {
         (*itDTP).setLayerId(layerHit - 4);
       }
       qualitybits ref8Hit(std::pow(2, layerHit));
       //Get the predicted laterality
       if (setLateralities_) {
         int predLat = (*itCand)->pattern()->latHitIn(layerHit, (*itDTP).channelId(), allowedVariance_);
         if (predLat == -10 || predLat == 0) {
           (*itDTP).setLaterality(NONE);
         } else if (predLat == -1) {
           (*itDTP).setLaterality(LEFT);
         } else if (predLat == +1) {
           (*itDTP).setLaterality(RIGHT);
         }
       }
 
       // If one hit is already present in the current layer, for each ptrPrimitive already existing,
       // create a new with all its hits. Then, fill it with the new hit and add it to the primitives vector.
       // Do not consider more than 2 hits in the same wire or more than maxPathsPerMatch_ total muonpaths per finalMatches_
       if (qualityDTP == (qualityDTP | ref8Hit) && qualityDTP2 != (qualityDTP2 | ref8Hit) &&
           ptrPrimitive_vector.size() < maxPathsPerMatch_) {
         if (debug_)
           LogDebug("PseudoBayesGrouping") << "PseudoBayesGrouping::run Creating additional muon paths";
 
         qualityDTP2 = (qualityDTP2 | ref8Hit);
 
         int n_prim = ptrPrimitive_vector.size();
 
         for (int j = 0; j < n_prim; j++) {
           DTPrimitivePtrs tmpPrimitive;
           for (int i = 0; i < NUM_LAYERS_2SL; i++) {
             tmpPrimitive.push_back(ptrPrimitive_vector.at(j).at(i));
           }
           // Now save the hit in the new path
           if (saveOnPlace_) {
             //This will save the primitive in a place of the vector equal to its L position
             tmpPrimitive.at(layerHit) = std::make_shared<DTPrimitive>((*itDTP));
           }
           if (!saveOnPlace_) {
             //This will save the primitive in order
             tmpPrimitive.at(intHit) = std::make_shared<DTPrimitive>((*itDTP));
           }
           // Now add the new path to the vector of paths
           ptrPrimitive_vector.push_back(tmpPrimitive);
         }
       }
 
       // If there is not one hit already in the layer, fill the DT primitives pointers
       else {
         if (debug_)
           LogDebug("PseudoBayesGrouping") << "PseudoBayesGrouping::run Adding hit to muon path";
 
         qualityDTP = (qualityDTP | ref8Hit);
 
         // for (all paths --> fill them)
         for (auto prim_it = ptrPrimitive_vector.begin(); prim_it != ptrPrimitive_vector.end(); ++prim_it) {
           if (saveOnPlace_) {
             //This will save the primitive in a place of the vector equal to its L position
             prim_it->at(layerHit) = std::make_shared<DTPrimitive>((*itDTP));
           }
           if (!saveOnPlace_) {
             //This will save the primitive in order
             intHit++;
             prim_it->at(intHit) = std::make_shared<DTPrimitive>((*itDTP));
           }
         }
       }
     }
 
     stringstream ss;
 
     int n_paths = ptrPrimitive_vector.size();
 
     for (int n_path = 0; n_path < n_paths; ++n_path) {
       mpaths.emplace_back(std::make_shared<MuonPath>(
           ptrPrimitive_vector.at(n_path), (short)(*itCand)->nLayerUp(), (short)(*itCand)->nLayerDown()));
     }
   }
 }

void PseudoBayesGrouping::finish ( )

overridevirtual

Reimplemented from MotherGrouping.

Definition at line 605 of file PseudoBayesGrouping.cc.

References debug_, and LogDebug.

Referenced by progressbar.ProgressBar::__next__().

                                  {
   if (debug_)
     LogDebug("PseudoBayesGrouping") << "PseudoBayesGrouping: finish";
 };

void PseudoBayesGrouping::initialise ( const edm::EventSetup & iEventSetup )

overridevirtual

Reimplemented from MotherGrouping.

Definition at line 45 of file PseudoBayesGrouping.cc.

References allMatches_, debug_, finalMatches_, LoadPattern(), LogDebug, nPatterns_, pattern_filename_, and prelimMatches_.

                                                                      {
   if (debug_)
     LogDebug("PseudoBayesGrouping") << "PseudoBayesGrouping::initialiase";
   if (debug_)
     LogDebug("PseudoBayesGrouping") << "PseudoBayesGrouping::initialiase using patterns file " << pattern_filename_;
   nPatterns_ = 0;
 
   TString patterns_folder = "L1Trigger/DTTriggerPhase2/data/";
 
   // Load all patterns
   // MB1
   LoadPattern(patterns_folder + "createdPatterns_MB1_left.root", 0, 0);
   LoadPattern(patterns_folder + "createdPatterns_MB1_right.root", 0, 2);
   // MB2
   LoadPattern(patterns_folder + "createdPatterns_MB2_left.root", 1, 0);
   LoadPattern(patterns_folder + "createdPatterns_MB2_right.root", 1, 2);
   // MB3
   LoadPattern(patterns_folder + "createdPatterns_MB3.root", 2, 1);
   // MB4
   LoadPattern(patterns_folder + "createdPatterns_MB4_left.root", 3, 0);
   LoadPattern(patterns_folder + "createdPatterns_MB4.root", 3, 1);
   LoadPattern(patterns_folder + "createdPatterns_MB4_right.root", 3, 2);
 
   prelimMatches_ = std::make_unique<CandidateGroupPtrs>();
   allMatches_ = std::make_unique<CandidateGroupPtrs>();
   finalMatches_ = std::make_unique<CandidateGroupPtrs>();
 }

void PseudoBayesGrouping::LoadPattern	(	TString	pattern_file_name,
		int	MB_number_input,
		int	SL_shift
	)

private

Definition at line 73 of file PseudoBayesGrouping.cc.

References allPatterns_, debug_, validate-o2o-wbm::f, L0L1Patterns_, L0L2Patterns_, L0L3Patterns_, L0L4Patterns_, L0L5Patterns_, L0L6Patterns_, L0L7Patterns_, L1L2Patterns_, L1L3Patterns_, L1L4Patterns_, L1L5Patterns_, L1L6Patterns_, L1L7Patterns_, L2L3Patterns_, L2L4Patterns_, L2L5Patterns_, L2L6Patterns_, L2L7Patterns_, L3L4Patterns_, L3L5Patterns_, L3L6Patterns_, L3L7Patterns_, L4L5Patterns_, L4L6Patterns_, L4L7Patterns_, L5L6Patterns_, L5L7Patterns_, L6L7Patterns_, LogDebug, nPatterns_, AlCaHLTBitMon_ParallelJobs::p, push_back(), and trackerHitRTTI::vector.

Referenced by initialise().

                                                                                             {
   TFile* f = TFile::Open(pattern_file_name, "READ");
 
   std::vector<std::vector<std::vector<int>>>* pattern_reader =
       (std::vector<std::vector<std::vector<int>>>*)f->Get("allPatterns");
 
   for (std::vector<std::vector<std::vector<int>>>::iterator itPattern = (*pattern_reader).begin();
        itPattern != (*pattern_reader).end();
        ++itPattern) {
     if (debug_)
       LogDebug("PseudoBayesGrouping") << "PseudoBayesGrouping::LoadPattern Loading patterns seeded by: "
                                       << itPattern->at(0).at(0) << ", " << itPattern->at(0).at(1) << ", "
                                       << itPattern->at(0).at(2) << ", ";
 
     auto p = std::make_shared<DTPattern>();
 
     bool is_seed = true;
     for (const auto& itHits : *itPattern) {
       // First entry is the seeding information
       if (is_seed) {
         p = std::make_shared<DTPattern>(DTPattern(itHits.at(0), itHits.at(1), itHits.at(2)));
         is_seed = false;
       }
       // Other entries are the hits information
       else {
         if (itHits.begin() == itHits.end())
           continue;
         // We need to correct the geometry from pattern generation to reconstruction as they use slightly displaced basis
         else if (itHits.at(0) % 2 == 0) {
           p->addHit(std::make_tuple(itHits.at(0), itHits.at(1), itHits.at(2)));
         } else if (itHits.at(0) % 2 == 1) {
           p->addHit(std::make_tuple(itHits.at(0), itHits.at(1) - 1, itHits.at(2)));
         }
       }
     }
     // Classified by seeding layers for optimized search later
     // TODO::This can be vastly improved using std::bitset<8>, for example
     if (p->sl1() == 0) {
       if (p->sl2() == 7)
         L0L7Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 6)
         L0L6Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 5)
         L0L5Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 4)
         L0L4Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 3)
         L0L3Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 2)
         L0L2Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 1)
         L0L1Patterns_[MB_number][SL_shift].push_back(p);
     }
     if (p->sl1() == 1) {
       if (p->sl2() == 7)
         L1L7Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 6)
         L1L6Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 5)
         L1L5Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 4)
         L1L4Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 3)
         L1L3Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 2)
         L1L2Patterns_[MB_number][SL_shift].push_back(p);
     }
     if (p->sl1() == 2) {
       if (p->sl2() == 7)
         L2L7Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 6)
         L2L6Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 5)
         L2L5Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 4)
         L2L4Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 3)
         L2L3Patterns_[MB_number][SL_shift].push_back(p);
     }
     if (p->sl1() == 3) {
       if (p->sl2() == 7)
         L3L7Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 6)
         L3L6Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 5)
         L3L5Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 4)
         L3L4Patterns_[MB_number][SL_shift].push_back(p);
     }
 
     if (p->sl1() == 4) {
       if (p->sl2() == 7)
         L4L7Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 6)
         L4L6Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 5)
         L4L5Patterns_[MB_number][SL_shift].push_back(p);
     }
     if (p->sl1() == 5) {
       if (p->sl2() == 7)
         L5L7Patterns_[MB_number][SL_shift].push_back(p);
       if (p->sl2() == 6)
         L5L6Patterns_[MB_number][SL_shift].push_back(p);
     }
     if (p->sl1() == 6) {
       if (p->sl2() == 7)
         L6L7Patterns_[MB_number][SL_shift].push_back(p);
     }
 
     //Also creating a list of all patterns, needed later for deleting and avoid a memory leak
     allPatterns_[MB_number][SL_shift].push_back(p);
     nPatterns_++;
   }
   if (debug_)
     LogDebug("PseudoBayesGrouping") << "PseudoBayesGrouping::initialiase Total number of loaded patterns: "
                                     << nPatterns_;
   f->Close();
   delete f;
 }

void PseudoBayesGrouping::ReCleanPatternsAndDigis ( )

private

Definition at line 551 of file PseudoBayesGrouping.cc.

References allowDuplicates_, allowUncorrelatedPatterns_, debug_, finalMatches_, LogDebug, minNLayerHits_, minSingleSLHitsMax_, minSingleSLHitsMin_, minUncorrelatedHits_, and prelimMatches_.

Referenced by run().

                                                   {
   //GhostbustPatterns that share hits and are of lower quality
   if (prelimMatches_->empty()) {
     return;
   };
   while ((prelimMatches_->at(0)->nLayerhits() >= minNLayerHits_ &&
           (prelimMatches_->at(0)->nLayerUp() >= minSingleSLHitsMax_ ||
            prelimMatches_->at(0)->nLayerDown() >= minSingleSLHitsMax_) &&
           (prelimMatches_->at(0)->nLayerUp() >= minSingleSLHitsMin_ &&
            prelimMatches_->at(0)->nLayerDown() >= minSingleSLHitsMin_)) ||
          (allowUncorrelatedPatterns_ &&
           ((prelimMatches_->at(0)->nLayerUp() >= minUncorrelatedHits_ && prelimMatches_->at(0)->nLayerDown() == 0) ||
            (prelimMatches_->at(0)->nLayerDown() >= minUncorrelatedHits_ && prelimMatches_->at(0)->nLayerUp() == 0)))) {
     finalMatches_->push_back(prelimMatches_->at(0));
     auto itSel = finalMatches_->end() - 1;
     prelimMatches_->erase(prelimMatches_->begin());
     if (prelimMatches_->empty()) {
       return;
     };
     for (auto cand_it = prelimMatches_->begin(); cand_it != prelimMatches_->end(); cand_it++) {
       if (*(*cand_it) == *(*itSel) && allowDuplicates_)
         continue;
       for (const auto& dt_it : (*itSel)->candHits()) {
         (*cand_it)->removeHit((*dt_it));
       }
     }
 
     std::sort(prelimMatches_->begin(), prelimMatches_->end(), CandPointGreat());
     if (debug_) {
       LogDebug("PseudoBayesGrouping") << "Pattern qualities: ";
       for (const auto& cand_it : *prelimMatches_) {
         LogDebug("PseudoBayesGrouping") << cand_it->nLayerhits() << ", " << cand_it->nisGood() << ", "
                                         << cand_it->nhits() << ", " << cand_it->quality() << ", " << cand_it->candId()
                                         << "\n";
       }
     }
   }
 }

void PseudoBayesGrouping::RecognisePatterns	(	std::vector< DTPrimitive >	digisinLDown,
		std::vector< DTPrimitive >	digisinLUp,
		dtbayesam::DTPatternPtrs	patterns
	)

private

Definition at line 454 of file PseudoBayesGrouping.cc.

References alldigis_, allMatches_, allowedVariance_, allowUncorrelatedPatterns_, debug_, change_name::diff, LogDebug, minNLayerHits_, minSingleSLHitsMax_, minSingleSLHitsMin_, minUncorrelatedHits_, eostools::move(), pidx_, and prelimMatches_.

Referenced by RecognisePatternsByLayerPairs().

                                                                     {
   //Loop over all hits and search for matching patterns (there will be four
   // amongst ~60, accounting for possible lateralities)
   for (auto dtPD_it = digisinLDown.begin(); dtPD_it != digisinLDown.end(); dtPD_it++) {
     int LDown = dtPD_it->layerId();
     int wireDown = dtPD_it->channelId();
     for (auto dtPU_it = digisinLUp.begin(); dtPU_it != digisinLUp.end(); dtPU_it++) {
       int LUp = dtPU_it->layerId();
       int wireUp = dtPU_it->channelId();
       int diff = wireUp - wireDown;
       for (auto pat_it = patterns.begin(); pat_it != patterns.end(); pat_it++) {
         //For each pair of hits in the layers search for the seeded patterns
         if ((*pat_it)->sl1() != (LDown) || (*pat_it)->sl2() != (LUp) || (*pat_it)->diff() != diff)
           continue;
         //If we are here a pattern was found and we can start comparing
         (*pat_it)->setHitDown(wireDown);
         auto cand = std::make_shared<CandidateGroup>(*pat_it);
         for (auto dtTest_it = alldigis_.begin(); dtTest_it != alldigis_.end(); dtTest_it++) {
           //Find hits matching to the pattern
           if (((*pat_it)->latHitIn(dtTest_it->layerId(), dtTest_it->channelId(), allowedVariance_)) != -999) {
             if (((*pat_it)->latHitIn(dtTest_it->layerId(), dtTest_it->channelId(), allowedVariance_)) == -10)
               cand->addHit((*dtTest_it), dtTest_it->layerId(), false);
             else
               cand->addHit((*dtTest_it), dtTest_it->layerId(), true);
           }
         }
         if ((cand->nhits() >= minNLayerHits_ &&
              (cand->nLayerUp() >= minSingleSLHitsMax_ || cand->nLayerDown() >= minSingleSLHitsMax_) &&
              (cand->nLayerUp() >= minSingleSLHitsMin_ && cand->nLayerDown() >= minSingleSLHitsMin_)) ||
             (allowUncorrelatedPatterns_ && ((cand->nLayerUp() >= minUncorrelatedHits_ && cand->nLayerDown() == 0) ||
                                             (cand->nLayerDown() >= minUncorrelatedHits_ && cand->nLayerUp() == 0)))) {
           if (debug_) {
             LogDebug("PseudoBayesGrouping")
                 << "PseudoBayesGrouping::RecognisePatterns Pattern found for pair in " << LDown << " ," << wireDown
                 << " ," << LUp << " ," << wireUp << "\n"
                 << "Candidate has " << cand->nhits() << " hits with quality " << cand->quality() << "\n"
                 << *(*pat_it);
           }
           //We currently save everything at this level, might want to be more restrictive
           pidx_++;
           cand->setCandId(pidx_);
           prelimMatches_->push_back(std::move(cand));
           allMatches_->push_back(std::move(cand));
         }
       }
     }
   }
 }

void PseudoBayesGrouping::RecognisePatternsByLayerPairs ( DTChamberId chamber_ID )

private

Definition at line 345 of file PseudoBayesGrouping.cc.

References digisinL0_, digisinL1_, digisinL2_, digisinL3_, digisinL4_, digisinL5_, digisinL6_, digisinL7_, L0L1Patterns_, L0L2Patterns_, L0L3Patterns_, L0L4Patterns_, L0L5Patterns_, L0L6Patterns_, L0L7Patterns_, L1L2Patterns_, L1L3Patterns_, L1L4Patterns_, L1L5Patterns_, L1L6Patterns_, L1L7Patterns_, L2L3Patterns_, L2L4Patterns_, L2L5Patterns_, L2L6Patterns_, L2L7Patterns_, L3L4Patterns_, L3L5Patterns_, L3L6Patterns_, L3L7Patterns_, L4L5Patterns_, L4L6Patterns_, L4L7Patterns_, L5L6Patterns_, L5L7Patterns_, L6L7Patterns_, pidx_, RecognisePatterns(), DTChamberId::sector(), edm::shift, DTChamberId::station(), and DTChamberId::wheel().

Referenced by run().

                                                                               {
   // chamber_ID traslated to MB, wheel, sector
   int MB = chamber_ID.station() - 1;
   int wheel = chamber_ID.wheel();
   int sector = chamber_ID.sector();
 
   // shift of SL3 wrt SL1
   int shift = -1;
 
   // Now define DT geometry depending on its ID
 
   // MB1
   if (MB == 0) {
     if (wheel == -1 || wheel == -2)
       shift = 2;  // positive (right)
     else if (wheel == 1 || wheel == 2)
       shift = 0;  // negative (left)
     else if (wheel == 0) {
       if (sector == 1 || sector == 4 || sector == 5 || sector == 8 || sector == 9 || sector == 12)
         shift = 2;  // positive (right)
       else
         shift = 0;  // negative (left)
     }
   }
   // MB2
   else if (MB == 1) {
     if (wheel == -1 || wheel == -2)
       shift = 0;  // negative (left)
     else if (wheel == 1 || wheel == 2)
       shift = 2;  // positive (right)
     else if (wheel == 0) {
       if (sector == 1 || sector == 4 || sector == 5 || sector == 8 || sector == 9 || sector == 12)
         shift = 0;  // negative (left)
       else
         shift = 2;  // positive (right)
     }
   }
   // MB3
   else if (MB == 2) {
     shift = 1;  // shift is always 0 in MB3
   }
   // MB4
   else if (MB == 3) {
     if (wheel == -1 || wheel == -2)
       if (sector == 4 || sector == 9 || sector == 11 || sector == 13)
         shift = 1;  // no shift
       else if (sector == 5 || sector == 6 || sector == 7 || sector == 8 || sector == 14)
         shift = 2;  // positive (right)
       else
         shift = 0;  // negative (left)
     else if (wheel == 1 || wheel == 2)
       if (sector == 4 || sector == 9 || sector == 11 || sector == 13)
         shift = 1;  // no shift
       else if (sector == 1 || sector == 2 || sector == 3 || sector == 10 || sector == 12)
         shift = 2;  // positive (right)
       else
         shift = 0;  // negative (left)
     else if (wheel == 0)
       if (sector == 4 || sector == 9 || sector == 11 || sector == 13)
         shift = 1;  // no shift
       else if (sector == 2 || sector == 3 || sector == 5 || sector == 8 || sector == 10)
         shift = 2;  // positive (right)
       else
         shift = 0;  // negative (left)
     else
       return;
   }
 
   //Separated from main run function for clarity. Do all pattern recognition steps
   pidx_ = 0;
   //Compare L0-L7
   RecognisePatterns(digisinL0_, digisinL7_, L0L7Patterns_[MB][shift]);
   //Compare L0-L6 and L1-L7
   RecognisePatterns(digisinL0_, digisinL6_, L0L6Patterns_[MB][shift]);
   RecognisePatterns(digisinL1_, digisinL7_, L1L7Patterns_[MB][shift]);
   //Compare L0-L5, L1-L6, L2-L7
   RecognisePatterns(digisinL0_, digisinL5_, L0L5Patterns_[MB][shift]);
   RecognisePatterns(digisinL1_, digisinL6_, L1L6Patterns_[MB][shift]);
   RecognisePatterns(digisinL2_, digisinL7_, L2L7Patterns_[MB][shift]);
   //L0-L4, L1-L5, L2-L6, L3-L7
   RecognisePatterns(digisinL0_, digisinL4_, L0L4Patterns_[MB][shift]);
   RecognisePatterns(digisinL1_, digisinL5_, L1L5Patterns_[MB][shift]);
   RecognisePatterns(digisinL2_, digisinL6_, L2L6Patterns_[MB][shift]);
   RecognisePatterns(digisinL3_, digisinL7_, L3L7Patterns_[MB][shift]);
   //L1-L4, L2-L5, L3-L6
   RecognisePatterns(digisinL1_, digisinL4_, L1L4Patterns_[MB][shift]);
   RecognisePatterns(digisinL2_, digisinL5_, L2L5Patterns_[MB][shift]);
   RecognisePatterns(digisinL3_, digisinL6_, L3L6Patterns_[MB][shift]);
   //L2-L4, L3-L5
   RecognisePatterns(digisinL2_, digisinL4_, L2L4Patterns_[MB][shift]);
   RecognisePatterns(digisinL3_, digisinL5_, L3L5Patterns_[MB][shift]);
   //L3-L4
   RecognisePatterns(digisinL3_, digisinL4_, L3L4Patterns_[MB][shift]);
   //Uncorrelated SL1
   RecognisePatterns(digisinL0_, digisinL1_, L0L1Patterns_[MB][shift]);
   RecognisePatterns(digisinL0_, digisinL2_, L0L2Patterns_[MB][shift]);
   RecognisePatterns(digisinL0_, digisinL3_, L0L3Patterns_[MB][shift]);
   RecognisePatterns(digisinL1_, digisinL2_, L1L2Patterns_[MB][shift]);
   RecognisePatterns(digisinL1_, digisinL3_, L1L3Patterns_[MB][shift]);
   RecognisePatterns(digisinL2_, digisinL3_, L2L3Patterns_[MB][shift]);
   //Uncorrelated SL3
   RecognisePatterns(digisinL4_, digisinL5_, L4L5Patterns_[MB][shift]);
   RecognisePatterns(digisinL4_, digisinL6_, L4L6Patterns_[MB][shift]);
   RecognisePatterns(digisinL4_, digisinL7_, L4L7Patterns_[MB][shift]);
   RecognisePatterns(digisinL5_, digisinL6_, L5L6Patterns_[MB][shift]);
   RecognisePatterns(digisinL5_, digisinL7_, L5L7Patterns_[MB][shift]);
   RecognisePatterns(digisinL6_, digisinL7_, L6L7Patterns_[MB][shift]);
 }

void PseudoBayesGrouping::run	(	edm::Event &	iEvent,
		const edm::EventSetup &	iEventSetup,
		const DTDigiCollection &	digis,
		MuonPathPtrs &	outMpath
	)

overridevirtual

Reimplemented from MotherGrouping.

Definition at line 193 of file PseudoBayesGrouping.cc.

References DTSuperLayerId::chamberId(), CleanDigisByLayer(), debug_, FillDigisByLayer(), FillMuonPaths(), finalMatches_, LogDebug, prelimMatches_, ReCleanPatternsAndDigis(), RecognisePatternsByLayerPairs(), and DTLayerId::superlayerId().

                                                     {
   //Takes dt digis collection and does the grouping for correlated hits, it is saved in a vector of up to 8 (or 4) correlated hits
   if (debug_)
     LogDebug("PseudoBayesGrouping") << "PseudoBayesGrouping::run";
   //Do initial cleaning
   CleanDigisByLayer();
   //Sort digis by layer
   FillDigisByLayer(&digis);
 
   //Sarch for patterns
   DTChamberId chamber_id;
   // We just want the chamber ID of the first digi
   // as they are all the same --> create a loop and break it
   // after the first iteration
   for (const auto& detUnitIt : digis) {
     const DTLayerId layer_Id = detUnitIt.first;
     chamber_id = layer_Id.superlayerId().chamberId();
     break;
   }
 
   RecognisePatternsByLayerPairs(chamber_id);
 
   // Now sort patterns by qualities
   std::sort(prelimMatches_->begin(), prelimMatches_->end(), CandPointGreat());
   if (debug_ && !prelimMatches_->empty()) {
     LogDebug("PseudoBayesGrouping") << "PseudoBayesGrouping::run Pattern qualities before cleaning: ";
     for (const auto& cand_it : *prelimMatches_) {
       LogDebug("PseudoBayesGrouping") << cand_it->nLayerhits() << ", " << cand_it->nisGood() << ", " << cand_it->nhits()
                                       << ", " << cand_it->quality() << ", " << cand_it->candId();
     }
   }
   //And ghostbust patterns to retain higher quality ones
   ReCleanPatternsAndDigis();
   if (debug_)
     LogDebug("PseudoBayesGrouping") << "PseudoBayesGrouping::run Number of found patterns: " << finalMatches_->size();
 
   //Last organize candidates information into muonpaths to finalize the grouping
   FillMuonPaths(mpaths);
   if (debug_)
     LogDebug("PseudoBayesGrouping") << "PseudoBayesGrouping::run ended run";
 }