EcalSampleMask.cc

Go to the documentation of this file.

#include <cassert>
#include "CondFormats/EcalObjects/interface/EcalSampleMask.h"
#include "DataFormats/EcalDigi/interface/EcalDataFrame.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"

using edm::LogError;

EcalSampleMask::EcalSampleMask() {
  // by default, all samples are set as active
  sampleMaskEB_ = pow(2, EcalDataFrame::MAXSAMPLES) - 1;
  sampleMaskEE_ = pow(2, EcalDataFrame::MAXSAMPLES) - 1;
}

EcalSampleMask::EcalSampleMask(const unsigned int ebmask, const unsigned int eemask) {
  sampleMaskEB_ = ebmask;
  sampleMaskEE_ = eemask;
}

EcalSampleMask::EcalSampleMask(const std::vector<unsigned int> &ebmask, const std::vector<unsigned int> &eemask) {
  setEcalSampleMaskRecordEB(ebmask);
  setEcalSampleMaskRecordEE(eemask);
}

EcalSampleMask::~EcalSampleMask() {}

void EcalSampleMask::setEcalSampleMaskRecordEB(const std::vector<unsigned int> &ebmask) {
  // check that size of the vector is adequate
  if (ebmask.size() != static_cast<unsigned int>(EcalDataFrame::MAXSAMPLES)) {
    LogError("DataMismatch") << " in EcalSampleMask::setEcalSampleMaskRecordEB size of ebmask (" << ebmask.size()
                             << ") need to be: " << EcalDataFrame::MAXSAMPLES << ". Bailing out." << std::endl;
    assert(0);
  }

  // check that values of vector are allowed
  for (unsigned int s = 0; s < ebmask.size(); s++) {
    if (ebmask.at(s) == 0 || ebmask.at(s) == 1) {
      ;
    } else {
      LogError("DataMismatch")
          << "in EcalSampleMask::setEcalSampleMaskRecordEB ebmask can only have values 0 or 1, while " << ebmask.at(s)
          << " was found. Bailing out. " << std::endl;
      assert(0);
    }
  }

  // ordering of bits:
  // ebmask.at(0)                         refers to the first sample read out and is mapped into the _most_ significant bit of sampleMaskEB_
  // ebmask.at(EcalDataFrame::MAXSAMPLES) refers to the last  sample read out and is mapped into the _least_ significant bit of sampleMaskEB_
  sampleMaskEB_ = 0;
  for (unsigned int sampleId = 0; sampleId < ebmask.size(); sampleId++) {
    sampleMaskEB_ |= (0x1 << (EcalDataFrame::MAXSAMPLES - (sampleId + 1)));
  }
}

void EcalSampleMask::setEcalSampleMaskRecordEE(const std::vector<unsigned int> &eemask) {
  // check that size of the vector is adequate
  if (eemask.size() != static_cast<unsigned int>(EcalDataFrame::MAXSAMPLES)) {
    LogError("DataMismatch") << " in EcalSampleMask::setEcalSampleMaskRecordEE size of eemask (" << eemask.size()
                             << ") need to be: " << EcalDataFrame::MAXSAMPLES << ". Bailing out." << std::endl;
    assert(0);
  }

  // check that values of vector are allowed
  for (unsigned int s = 0; s < eemask.size(); s++) {
    if (eemask.at(s) == 0 || eemask.at(s) == 1) {
      ;
    } else {
      LogError("DataMismatch")
          << "in EcalSampleMask::setEcalSampleMaskRecordEE eemask can only have values 0 or 1, while " << eemask.at(s)
          << " was found. Bailing out. " << std::endl;
      assert(0);
    }
  }

  // ordering of bits:
  // eemask.at(0)                         refers to the first sample read out and is mapped into the _most_ significant bit of sampleMaskEE_
  // eemask.at(EcalDataFrame::MAXSAMPLES) refers to the last  sample read out and is mapped into the _least_ significant bit of sampleMaskEE_
  sampleMaskEE_ = 0;
  for (unsigned int sampleId = 0; sampleId < eemask.size(); sampleId++) {
    sampleMaskEE_ |= (0x1 << (EcalDataFrame::MAXSAMPLES - (sampleId + 1)));
  }
}

bool EcalSampleMask::useSampleEB(const int sampleId) const {
  if (sampleId >= EcalDataFrame::MAXSAMPLES) {
    LogError("DataMismatch") << "in EcalSampleMask::useSampleEB only sampleId up to: " << EcalDataFrame::MAXSAMPLES
                             << " can be used, while: " << sampleId << " was found. Bailing out." << std::endl;
    assert(0);
  }

  // ordering convention:
  // ebmask.at(0)                         refers to the first sample read out and is mapped into the _most_ significant bit of sampleMaskEB_
  // ebmask.at(EcalDataFrame::MAXSAMPLES) refers to the last  sample read out and is mapped into the _least_ significant bit of sampleMaskEB_
  return (sampleMaskEB_ & (0x1 << (EcalDataFrame::MAXSAMPLES - (sampleId + 1))));
}

bool EcalSampleMask::useSampleEE(const int sampleId) const {
  if (sampleId >= EcalDataFrame::MAXSAMPLES) {
    LogError("DataMismatch") << "in EcalSampleMask::useSampleEE only sampleId up to: " << EcalDataFrame::MAXSAMPLES
                             << " can be used, while: " << sampleId << " was found. Bailing out." << std::endl;
    assert(0);
  }

  // ordering convention:
  // ebmask.at(0)                         refers to the first sample read out and is mapped into the _most_ significant bit of sampleMaskEB_
  // ebmask.at(EcalDataFrame::MAXSAMPLES) refers to the last  sample read out and is mapped into the _least_ significant bit of sampleMaskEB_
  return (sampleMaskEE_ & (0x1 << (EcalDataFrame::MAXSAMPLES - (sampleId + 1))));
}

bool EcalSampleMask::useSample(const int sampleId, DetId &theCrystalId) const {
  if (sampleId >= EcalDataFrame::MAXSAMPLES) {
    LogError("DataMismatch") << "in EcalSampleMask::useSample only sampleId up to: " << EcalDataFrame::MAXSAMPLES
                             << " can be used, while: " << sampleId << " was found. Bailing out." << std::endl;
    assert(0);
  }

  if (theCrystalId.subdetId() == EcalBarrel) {
    return useSampleEB(sampleId);
  } else if (theCrystalId.subdetId() == EcalEndcap) {
    return useSampleEE(sampleId);
  } else {
    LogError("DataMismatch")
        << "EcalSampleMaskuseSample::useSample can only be called for EcalBarrel or EcalEndcap DetID" << std::endl;
    assert(0);
  }
}

//  LocalWords:  eemask