PixelEndcapNameUpgrade.cc

Go to the documentation of this file.

#include "DataFormats/SiPixelDetId/interface/PixelEndcapNameUpgrade.h"
 
#include <sstream>
 
#include "DataFormats/SiPixelDetId/interface/PXFDetId.h"
 
#include "FWCore/MessageLogger/interface/MessageLogger.h"
 
using namespace std;
 
PixelEndcapNameUpgrade::PixelEndcapNameUpgrade(const DetId& id) : PixelModuleName(false) {
  PXFDetId cmssw_numbering(id);
  int side = cmssw_numbering.side();
  int tmpBlade = cmssw_numbering.blade();
  bool outer = false;
 
  /*
  //    iasonas1-with this we determine inner-outer ring, NOT x-direction
  if (tmpBlade >= 23 && tmpBlade <= 56) {       //23-56-->outer ring
    outer = true;
    theBlade = 57-tmpBlade;
  } else if( tmpBlade <= 22 ) {                 //1-22-->inner ring
    theBlade = 23-tmpBlade; 
  } //  iasonas1-end
  
*/
  //    iasonas2-with this we determine inner-outer x-position (x>0-x<0), NOT ring
  //    m/pI:1-6,18-31,49-56. m/pO:7-17,32-48.
  if (tmpBlade >= 7 && tmpBlade <= 17) {
    outer = true;
    theBlade = tmpBlade - 6;  //7...17-->1...11
  } else if (tmpBlade >= 32 && tmpBlade <= 48) {
    outer = true;
    theBlade = 60 - tmpBlade;  //32...48-->28...12
  } else if (tmpBlade <= 6) {
    theBlade = 7 - tmpBlade;  //1...6-->6...1
  } else if (tmpBlade >= 18 && tmpBlade <= 31) {
    theBlade = 38 - tmpBlade;  //18...31-->20...7
  } else if (tmpBlade >= 49 && tmpBlade <= 56) {
    theBlade = 77 - tmpBlade;  //49...56-->28...21
  }                            //  iasonas2-end
 
  if (side == 1 && outer)
    thePart = mO;
  else if (side == 1 && !outer)
    thePart = mI;
  else if (side == 2 && outer)
    thePart = pO;
  else if (side == 2 && !outer)
    thePart = pI;
 
  theDisk = cmssw_numbering.disk();
  thePannel = cmssw_numbering.panel();
  thePlaquette = cmssw_numbering.module();
}
 
// constructor from name string
PixelEndcapNameUpgrade::PixelEndcapNameUpgrade(std::string name)
    : PixelModuleName(false), thePart(mO), theDisk(0), theBlade(0), thePannel(0), thePlaquette(0) {
  // parse the name string
  // first, check to make sure this is an FPix name, should start with "FPix_"
  // also check to make sure the needed parts are present
  if ((name.substr(0, 5) != "FPix_") || (name.find("_B") == string::npos) || (name.find("_D") == string::npos) ||
      (name.find("_BLD") == string::npos) || (name.find("_PNL") == string::npos) ||
      (name.find("_PLQ") == string::npos)) {
    edm::LogError("BadNameString|SiPixel")
        << "Bad name string in PixelEndcapNameUpgrade::PixelEndcapNameUpgrade(std::string): " << name;
    return;
  }
  // strip off ROC part if it's there
  if (name.find("_ROC") != string::npos)
    name = name.substr(0, name.find("_ROC"));
  // get the half cylinder
  string hcString = name.substr(name.find("_B") + 2, name.find("_D") - name.find("_B") - 2);
  if (hcString == "mO")
    thePart = mO;
  else if (hcString == "mI")
    thePart = mI;
  else if (hcString == "pO")
    thePart = pO;
  else if (hcString == "pI")
    thePart = pI;
  else {
    edm::LogError("BadNameString|SiPixel")
        << "Unable to determine half cylinder in PixelEndcapNameUpgrade::PixelEndcapNameUpgrade(std::string): " << name;
  }
  // get the disk
  string diskString = name.substr(name.find("_D") + 2, name.find("_BLD") - name.find("_D") - 2);
  if (diskString == "1")
    theDisk = 1;
  else if (diskString == "2")
    theDisk = 2;
  else if (diskString == "3")
    theDisk = 3;
  else {
    edm::LogError("BadNameString|SiPixel")
        << "Unable to determine disk number in PixelEndcapNameUpgrade::PixelEndcapNameUpgrade(std::string): " << name;
  }
  // get the blade
  string bladeString = name.substr(name.find("_BLD") + 4, name.find("_PNL") - name.find("_BLD") - 4);
  // since atoi() doesn't report errors, do it the long way
  if (bladeString == "1")
    theBlade = 1;
  else if (bladeString == "2")
    theBlade = 2;
  else if (bladeString == "3")
    theBlade = 3;
  else if (bladeString == "4")
    theBlade = 4;
  else if (bladeString == "5")
    theBlade = 5;
  else if (bladeString == "6")
    theBlade = 6;
  else if (bladeString == "7")
    theBlade = 7;
  else if (bladeString == "8")
    theBlade = 8;
  else if (bladeString == "9")
    theBlade = 9;
  else if (bladeString == "10")
    theBlade = 10;
  else if (bladeString == "11")
    theBlade = 11;
  else if (bladeString == "12")
    theBlade = 12;
  else if (bladeString == "13")
    theBlade = 13;
  else if (bladeString == "14")
    theBlade = 14;
  else if (bladeString == "15")
    theBlade = 15;
  else if (bladeString == "16")
    theBlade = 16;
  else if (bladeString == "17")
    theBlade = 17;
  else {
    edm::LogError("BadNameString|SiPixel")
        << "Unable to determine blade number in PixelEndcapNameUpgrade::PixelEndcapNameUpgrade(std::string): " << name;
  }
  // find the panel
  string panelString = name.substr(name.find("_PNL") + 4, name.find("_PLQ") - name.find("_PNL") - 4);
  if (panelString == "1")
    thePannel = 1;
  else if (panelString == "2")
    thePannel = 2;
  else {
    edm::LogError("BadNameString|SiPixel")
        << "Unable to determine panel number in PixelEndcapNameUpgrade::PixelEndcapNameUpgrade(std::string): " << name;
  }
  // find the plaquette
  string plaquetteString = name.substr(name.find("_PLQ") + 4, name.size() - name.find("_PLQ") - 4);
  if (plaquetteString == "1")
    thePlaquette = 1;
  else {
    edm::LogError("BadNameString|SiPixel")
        << "Unable to determine plaquette number in PixelEndcapNameUpgrade::PixelEndcapNameUpgrade(std::string): "
        << name;
  }
 
}  // PixelEndcapNameUpgrade::PixelEndcapNameUpgrade(std::string name)
 
PixelModuleName::ModuleType PixelEndcapNameUpgrade::moduleType() const {
  ModuleType type = v2x8;
  if (pannelName() == 1) {
    if (plaquetteName() == 1) {
      type = v2x8;
    }
  } else {
    if (plaquetteName() == 1) {
      type = v2x8;
    }
  }
  return type;
}
 
bool PixelEndcapNameUpgrade::operator==(const PixelModuleName& o) const {
  if (!o.isBarrel()) {
    const PixelEndcapNameUpgrade* other = dynamic_cast<const PixelEndcapNameUpgrade*>(&o);
    return (other && thePart == other->thePart && theDisk == other->theDisk && theBlade == other->theBlade &&
            thePannel == other->thePannel && thePlaquette == other->thePlaquette);
  } else
    return false;
}
 
string PixelEndcapNameUpgrade::name() const {
  std::ostringstream stm;
  stm << "FPix_B" << thePart << "_D" << theDisk << "_BLD" << theBlade << "_PNL" << thePannel << "_PLQ" << thePlaquette;
  return stm.str();
}
 
std::ostream& operator<<(std::ostream& out, const PixelEndcapNameUpgrade::HalfCylinder& t) {
  switch (t) {
    case (PixelEndcapNameUpgrade::pI): {
      out << "pI";
      break;
    }
    case (PixelEndcapNameUpgrade::pO): {
      out << "pO";
      break;
    }
    case (PixelEndcapNameUpgrade::mI): {
      out << "mI";
      break;
    }
    case (PixelEndcapNameUpgrade::mO): {
      out << "mO";
      break;
    }
    default:
      out << "unknown";
  };
  return out;
}
 
// return the DetId
PXFDetId PixelEndcapNameUpgrade::getDetId() {
  uint32_t side = 0;
  uint32_t disk = 0;
  uint32_t blade = 0;
  uint32_t panel = 0;
  uint32_t module = 0;
 
  // figure out the side
  HalfCylinder hc = halfCylinder();
  if (hc == mO || hc == mI)
    side = 1;
  else if (hc == pO || hc == pI)
    side = 2;
 
  // get disk/blade/panel/module numbers from PixelEndcapNameUpgrade object
  disk = static_cast<uint32_t>(diskName());
  uint32_t tmpBlade = static_cast<uint32_t>(bladeName());
  panel = static_cast<uint32_t>(pannelName());
  module = static_cast<uint32_t>(plaquetteName());
 
  // convert blade numbering to cmssw convention
  bool outer = false;
  outer = (hc == mO) || (hc == pO);
  /*
  //iasonas1
  if (outer) {blade = 57 - tmpBlade;}
  else       {blade = 23 - tmpBlade;}
  
*/
  //iasonas2    m/pI:1-6,18-31,49-56. m/pO:7-17,32-48.
  if (outer) {
    if (tmpBlade >= 7 && tmpBlade <= 17)
      theBlade = tmpBlade + 6;
    else if (tmpBlade >= 32 && tmpBlade <= 48)
      theBlade = 60 - tmpBlade;
  } else {  //inner
    if (tmpBlade <= 6)
      theBlade = 7 - tmpBlade;
    else if (tmpBlade >= 18 && tmpBlade <= 31)
      theBlade = 38 - tmpBlade;
    else if (tmpBlade >= 49 && tmpBlade <= 56)
      theBlade = 77 - tmpBlade;
  }
 
  // create and return the DetId
  return PXFDetId(side, disk, blade, panel, module);
 
}  // PXFDetId PixelEndcapNameUpgrade::getDetId()