CMS 3D CMS Logo
List of all members | Classes | Public Member Functions | Public Attributes | Private Member Functions | Private Attributes
Phase2TrackerMonitorDigi Class Reference

#include <Phase2TrackerMonitorDigi.h>

Inheritance diagram for Phase2TrackerMonitorDigi:
DQMEDAnalyzer edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >

Classes

struct  DigiMEs
 
struct  Ph2DigiCluster
 

Public Member Functions

void analyze (const edm::Event &iEvent, const edm::EventSetup &iSetup) override
 
void bookHistograms (DQMStore::IBooker &ibooker, edm::Run const &iRun, edm::EventSetup const &iSetup) override
 
void dqmBeginRun (const edm::Run &iRun, const edm::EventSetup &iSetup) override
 
std::string getHistoId (uint32_t det_id, bool flag)
 
 Phase2TrackerMonitorDigi (const edm::ParameterSet &)
 
 ~Phase2TrackerMonitorDigi () override
 
- Public Member Functions inherited from DQMEDAnalyzer
void accumulate (edm::Event const &event, edm::EventSetup const &setup) final
 
void beginLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final
 
void beginRun (edm::Run const &run, edm::EventSetup const &setup) final
 
void beginStream (edm::StreamID id) final
 
 DQMEDAnalyzer ()
 
void endLuminosityBlock (edm::LuminosityBlock const &lumi, edm::EventSetup const &setup) final
 
void endRun (edm::Run const &run, edm::EventSetup const &setup) final
 
virtual bool getCanSaveByLumi ()
 
- Public Member Functions inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
 EDProducer ()=default
 
 EDProducer (const EDProducer &)=delete
 
bool hasAbilityToProduceInBeginLumis () const final
 
bool hasAbilityToProduceInBeginProcessBlocks () const final
 
bool hasAbilityToProduceInBeginRuns () const final
 
bool hasAbilityToProduceInEndLumis () const final
 
bool hasAbilityToProduceInEndProcessBlocks () const final
 
bool hasAbilityToProduceInEndRuns () const final
 
const EDProducer & operator= (const EDProducer &)=delete
 

Public Attributes

MonitorElement * RZOccupancyMap
 
MonitorElement * RZPositionMap
 
MonitorElement * XYOccupancyMap
 
MonitorElement * XYPositionMap
 

Private Member Functions

void bookLayerHistos (DQMStore::IBooker &ibooker, unsigned int det_id)
 
void fillDigiClusters (DigiMEs &mes, std::vector< Ph2DigiCluster > &digi_clusters)
 
void fillITPixelDigiHistos (const edm::Handle< edm::DetSetVector< PixelDigi >> handle)
 
void fillOTDigiHistos (const edm::Handle< edm::DetSetVector< Phase2TrackerDigi >> handle)
 

Private Attributes

bool clsFlag_
 
edm::ParameterSet config_
 
const edm::ESGetToken< TrackerGeometry, TrackerDigiGeometryRecord > geomToken_
 
std::string geomType_
 
edm::InputTag itPixelDigiSrc_
 
const edm::EDGetTokenT< edm::DetSetVector< PixelDigi > > itPixelDigiToken_
 
std::map< std::string, DigiMEs > layerMEs
 
edm::InputTag otDigiSrc_
 
const edm::EDGetTokenT< edm::DetSetVector< Phase2TrackerDigi > > otDigiToken_
 
bool pixelFlag_
 
const TrackerGeometry * tkGeom_ = nullptr
 
const edm::ESGetToken< TrackerTopology, TrackerTopologyRcd > topoToken_
 
const TrackerTopology * tTopo_ = nullptr
 

Additional Inherited Members

- Public Types inherited from DQMEDAnalyzer
typedef dqm::reco::DQMStore DQMStore
 
typedef dqm::reco::MonitorElement MonitorElement
 
- Public Types inherited from edm::stream::EDProducer< edm::GlobalCache< DQMEDAnalyzerGlobalCache >, edm::EndRunProducer, edm::EndLuminosityBlockProducer, edm::Accumulator >
using CacheTypes = CacheContexts< T... >
 
using GlobalCache = typename CacheTypes::GlobalCache
 
using HasAbility = AbilityChecker< T... >
 
using InputProcessBlockCache = typename CacheTypes::InputProcessBlockCache
 
using LuminosityBlockCache = typename CacheTypes::LuminosityBlockCache
 
using LuminosityBlockContext = LuminosityBlockContextT< LuminosityBlockCache, RunCache, GlobalCache >
 
using LuminosityBlockSummaryCache = typename CacheTypes::LuminosityBlockSummaryCache
 
using RunCache = typename CacheTypes::RunCache
 
using RunContext = RunContextT< RunCache, GlobalCache >
 
using RunSummaryCache = typename CacheTypes::RunSummaryCache
 
- Static Public Member Functions inherited from DQMEDAnalyzer
static void globalEndJob (DQMEDAnalyzerGlobalCache const *)
 
static void globalEndLuminosityBlockProduce (edm::LuminosityBlock &lumi, edm::EventSetup const &setup, LuminosityBlockContext const *context)
 
static void globalEndRunProduce (edm::Run &run, edm::EventSetup const &setup, RunContext const *context)
 
static std::unique_ptr< DQMEDAnalyzerGlobalCache > initializeGlobalCache (edm::ParameterSet const &)
 
- Protected Member Functions inherited from DQMEDAnalyzer
uint64_t meId () const
 
- Protected Attributes inherited from DQMEDAnalyzer
edm::EDPutTokenT< DQMToken > lumiToken_
 
edm::EDPutTokenT< DQMToken > runToken_
 
unsigned int streamId_
 

Detailed Description

Description: It generates various histograms of digi properties. Manual switching is enabled for each histogram. Seperate Histograms are there for P type and S type sensors of the outer Tracker

Definition at line 20 of file Phase2TrackerMonitorDigi.h.

Constructor & Destructor Documentation

◆ Phase2TrackerMonitorDigi()

Phase2TrackerMonitorDigi::Phase2TrackerMonitorDigi ( const edm::ParameterSet &  iConfig)
explicit

Definition at line 48 of file Phase2TrackerMonitorDigi.cc.

49  : config_(iConfig),
50  pixelFlag_(config_.getParameter<bool>("PixelPlotFillingFlag")),
51  clsFlag_(config_.getParameter<bool>("StandAloneClusteriserFlag")),
52  geomType_(config_.getParameter<std::string>("GeometryType")),
53  otDigiSrc_(config_.getParameter<edm::InputTag>("OuterTrackerDigiSource")),
54  itPixelDigiSrc_(config_.getParameter<edm::InputTag>("InnerPixelDigiSource")),
55  otDigiToken_(consumes<edm::DetSetVector<Phase2TrackerDigi>>(otDigiSrc_)),
56  itPixelDigiToken_(consumes<edm::DetSetVector<PixelDigi>>(itPixelDigiSrc_)),
57  geomToken_(esConsumes<TrackerGeometry, TrackerDigiGeometryRecord, edm::Transition::BeginRun>()),
58  topoToken_(esConsumes<TrackerTopology, TrackerTopologyRcd, edm::Transition::BeginRun>()) {
59  edm::LogInfo("Phase2TrackerMonitorDigi") << ">>> Construct Phase2TrackerMonitorDigi ";
60 }

◆ ~Phase2TrackerMonitorDigi()

Phase2TrackerMonitorDigi::~Phase2TrackerMonitorDigi ( )
override

Definition at line 65 of file Phase2TrackerMonitorDigi.cc.

65  {
66  // do anything here that needs to be done at desctruction time
67  // (e.g. close files, deallocate resources etc.)
68  edm::LogInfo("Phase2TrackerMonitorDigi") << ">>> Destroy Phase2TrackerMonitorDigi ";
69 }

Member Function Documentation

◆ analyze()

void Phase2TrackerMonitorDigi::analyze ( const edm::Event &  iEvent,
const edm::EventSetup &  iSetup 
)
overridevirtual

Reimplemented from DQMEDAnalyzer.

Definition at line 78 of file Phase2TrackerMonitorDigi.cc.

78  {
79  using namespace edm;
80 
81  // Get digis
82  const auto& pixDigiHandle = iEvent.getHandle(itPixelDigiToken_);
83  const auto& otDigiHandle = iEvent.getHandle(otDigiToken_);
84 
85  // Tracker Topology
86  edm::ESWatcher<TrackerDigiGeometryRecord> theTkDigiGeomWatcher;
87  if (theTkDigiGeomWatcher.check(iSetup)) {
88  if (pixelFlag_)
89  fillITPixelDigiHistos(pixDigiHandle);
90  else
91  fillOTDigiHistos(otDigiHandle);
92  }
93 }

References edm::ESWatcher< T >::check(), fillITPixelDigiHistos(), fillOTDigiHistos(), iEvent, itPixelDigiToken_, otDigiToken_, and pixelFlag_.

◆ bookHistograms()

void Phase2TrackerMonitorDigi::bookHistograms ( DQMStore::IBooker &  ibooker,
edm::Run const &  iRun,
edm::EventSetup const &  iSetup 
)
overridevirtual

Implements DQMEDAnalyzer.

Definition at line 336 of file Phase2TrackerMonitorDigi.cc.

338  {
339  std::string top_folder = config_.getParameter<std::string>("TopFolderName");
340  edm::ESWatcher<TrackerDigiGeometryRecord> theTkDigiGeomWatcher;
341 
342  if (theTkDigiGeomWatcher.check(iSetup)) {
343  for (auto const& det_u : tkGeom_->detUnits()) {
344  unsigned int detId_raw = det_u->geographicalId().rawId();
345  bookLayerHistos(ibooker, detId_raw);
346  }
347  }
348  ibooker.cd();
349  std::stringstream folder_name;
350  folder_name << top_folder << "/"
351  << "DigiMonitor";
352  ibooker.setCurrentFolder(folder_name.str());
353 
354  edm::ParameterSet Parameters = config_.getParameter<edm::ParameterSet>("XYPositionMapH");
355  edm::ParameterSet ParametersOcc = config_.getParameter<edm::ParameterSet>("DigiOccupancyPH");
356  if (Parameters.getParameter<bool>("switch"))
357  XYPositionMap = ibooker.book2D("DigiXPosVsYPos",
358  "DigiXPosVsYPos",
359  Parameters.getParameter<int32_t>("Nxbins"),
360  Parameters.getParameter<double>("xmin"),
361  Parameters.getParameter<double>("xmax"),
362  Parameters.getParameter<int32_t>("Nybins"),
363  Parameters.getParameter<double>("ymin"),
364  Parameters.getParameter<double>("ymax"));
365  else
366  XYPositionMap = nullptr;
367 
368  if (Parameters.getParameter<bool>("switch") && ParametersOcc.getParameter<bool>("switch"))
369  XYOccupancyMap = ibooker.bookProfile2D("OccupancyInXY",
370  "OccupancyInXY",
371  Parameters.getParameter<int32_t>("Nxbins"),
372  Parameters.getParameter<double>("xmin"),
373  Parameters.getParameter<double>("xmax"),
374  Parameters.getParameter<int32_t>("Nybins"),
375  Parameters.getParameter<double>("ymin"),
376  Parameters.getParameter<double>("ymax"),
377  ParametersOcc.getParameter<double>("xmin"),
378  ParametersOcc.getParameter<double>("xmax"));
379  else
380  XYOccupancyMap = nullptr;
381 
382  Parameters = config_.getParameter<edm::ParameterSet>("RZPositionMapH");
383  if (Parameters.getParameter<bool>("switch"))
384  RZPositionMap = ibooker.book2D("DigiRPosVsZPos",
385  "DigiRPosVsZPos",
386  Parameters.getParameter<int32_t>("Nxbins"),
387  Parameters.getParameter<double>("xmin"),
388  Parameters.getParameter<double>("xmax"),
389  Parameters.getParameter<int32_t>("Nybins"),
390  Parameters.getParameter<double>("ymin"),
391  Parameters.getParameter<double>("ymax"));
392  else
393  RZPositionMap = nullptr;
394 
395  if (Parameters.getParameter<bool>("switch") && ParametersOcc.getParameter<bool>("switch"))
396  RZOccupancyMap = ibooker.bookProfile2D("OccupancyInRZ",
397  "OccupancyInRZ",
398  Parameters.getParameter<int32_t>("Nxbins"),
399  Parameters.getParameter<double>("xmin"),
400  Parameters.getParameter<double>("xmax"),
401  Parameters.getParameter<int32_t>("Nybins"),
402  Parameters.getParameter<double>("ymin"),
403  Parameters.getParameter<double>("ymax"),
404  ParametersOcc.getParameter<double>("xmin"),
405  ParametersOcc.getParameter<double>("xmax"));
406  else
407  RZOccupancyMap = nullptr;
408 }

References dqm::implementation::IBooker::book2D(), bookLayerHistos(), dqm::implementation::IBooker::bookProfile2D(), dqm::implementation::NavigatorBase::cd(), config_, TrackerGeometry::detUnits(), fed_dqm_sourceclient-live_cfg::folder_name, edm::ParameterSet::getParameter(), RZOccupancyMap, RZPositionMap, dqm::implementation::NavigatorBase::setCurrentFolder(), AlCaHLTBitMon_QueryRunRegistry::string, tkGeom_, XYOccupancyMap, and XYPositionMap.

◆ bookLayerHistos()

void Phase2TrackerMonitorDigi::bookLayerHistos ( DQMStore::IBooker &  ibooker,
unsigned int  det_id 
)
private

Definition at line 412 of file Phase2TrackerMonitorDigi.cc.

412  {
413  int layer;
414  if (pixelFlag_)
415  layer = tTopo_->getITPixelLayerNumber(det_id);
416  else
417  layer = tTopo_->getOTLayerNumber(det_id);
418 
419  if (layer < 0)
420  return;
421  std::string key = getHistoId(det_id, pixelFlag_);
422  std::map<std::string, DigiMEs>::iterator pos = layerMEs.find(key);
423 
424  if (pos == layerMEs.end()) {
425  std::string top_folder = config_.getParameter<std::string>("TopFolderName");
426  std::stringstream folder_name;
427 
428  //For endCap: P-type sensors are present only upto ring 10 for discs 1&2 (TEDD-1) and upto ring 7 for discs 3,4&5 (TEDD-2)
429  bool isPStypeModForTEDD_1 =
430  (!pixelFlag_ && layer > 100 && tTopo_->tidWheel(det_id) < 3 && tTopo_->tidRing(det_id) <= 10) ? true : false;
431  bool isPStypeModForTEDD_2 =
432  (!pixelFlag_ && layer > 100 && tTopo_->tidWheel(det_id) >= 3 && tTopo_->tidRing(det_id) <= 7) ? true : false;
433 
434  bool isPtypeSensor =
435  (pixelFlag_ || (layer < 4 || (layer > 6 && (isPStypeModForTEDD_1 || isPStypeModForTEDD_2)))) ? true : false;
436 
437  ibooker.cd();
438  ibooker.setCurrentFolder(top_folder + "/DigiMonitor/" + key);
439  edm::LogInfo("Phase2TrackerMonitorDigi") << " Booking Histograms in : " << key;
440 
441  std::ostringstream HistoName;
442  DigiMEs local_mes;
443 
444  local_mes.nDigiPerLayer = 0;
445  local_mes.nHitDetsPerLayer = 0;
446 
447  edm::ParameterSet Parameters = config_.getParameter<edm::ParameterSet>("NumberOfDigisPerDetH");
448  edm::ParameterSet EtaParameters = config_.getParameter<edm::ParameterSet>("EtaH");
449  HistoName.str("");
450  HistoName << "NumberOfDigisPerDet";
451  if (Parameters.getParameter<bool>("switch"))
452  local_mes.NumberOfDigisPerDet = ibooker.book1D(HistoName.str(),
453  HistoName.str(),
454  Parameters.getParameter<int32_t>("Nbins"),
455  Parameters.getParameter<double>("xmin"),
456  Parameters.getParameter<double>("xmax"));
457  else
458  local_mes.NumberOfDigisPerDet = nullptr;
459 
460  Parameters = config_.getParameter<edm::ParameterSet>("TotalNumberOfDigisPerLayerH");
461  HistoName.str("");
462  HistoName << "TotalNumberOfDigisPerLayer";
463  if (Parameters.getParameter<bool>("switch"))
464  local_mes.TotalNumberOfDigisPerLayer = ibooker.book1D(HistoName.str(),
465  HistoName.str(),
466  Parameters.getParameter<int32_t>("Nbins"),
467  Parameters.getParameter<double>("xmin"),
468  Parameters.getParameter<double>("xmax"));
469  else
470  local_mes.TotalNumberOfDigisPerLayer = nullptr;
471 
472  Parameters = config_.getParameter<edm::ParameterSet>("NumberOfHitDetsPerLayerH");
473  HistoName.str("");
474  HistoName << "NumberOfHitDetectorsPerLayer";
475  if (Parameters.getParameter<bool>("switch"))
476  local_mes.NumberOfHitDetectorsPerLayer = ibooker.book1D(HistoName.str(),
477  HistoName.str(),
478  Parameters.getParameter<int32_t>("Nbins"),
479  Parameters.getParameter<double>("xmin"),
480  Parameters.getParameter<double>("xmax"));
481  else
482  local_mes.NumberOfHitDetectorsPerLayer = nullptr;
483 
484  // Plots only for the inner pixel
485  if (pixelFlag_) {
486  Parameters = config_.getParameter<edm::ParameterSet>("ChargeXYMapH");
487  HistoName.str("");
488  HistoName << "ChargeXYMap";
489  if (Parameters.getParameter<bool>("switch"))
490  local_mes.ChargeXYMap = ibooker.book2D(HistoName.str(),
491  HistoName.str(),
492  Parameters.getParameter<int32_t>("Nxbins"),
493  Parameters.getParameter<double>("xmin"),
494  Parameters.getParameter<double>("xmax"),
495  Parameters.getParameter<int32_t>("Nybins"),
496  Parameters.getParameter<double>("ymin"),
497  Parameters.getParameter<double>("ymax"));
498  else
499  local_mes.ChargeXYMap = nullptr;
500 
501  Parameters = config_.getParameter<edm::ParameterSet>("DigiChargeH");
502  HistoName.str("");
503  HistoName << "ChargeOfDigis";
504  if (Parameters.getParameter<bool>("switch"))
505  local_mes.ChargeOfDigis = ibooker.book1D(HistoName.str(),
506  HistoName.str(),
507  Parameters.getParameter<int32_t>("Nbins"),
508  Parameters.getParameter<double>("xmin"),
509  Parameters.getParameter<double>("xmax"));
510  else
511  local_mes.ChargeOfDigis = nullptr;
512 
513  // For standalone clusteriser
514  if (clsFlag_) {
515  edm::ParameterSet WidthParameters = config_.getParameter<edm::ParameterSet>("ClusterWidthH");
516  HistoName.str("");
517  HistoName << "ChargeOfDigisVsWidth";
518  if (Parameters.getParameter<bool>("switch") && WidthParameters.getParameter<bool>("switch"))
519  local_mes.ChargeOfDigisVsWidth = ibooker.book2D(HistoName.str(),
520  HistoName.str(),
521  Parameters.getParameter<int32_t>("Nbins"),
522  Parameters.getParameter<double>("xmin"),
523  Parameters.getParameter<double>("xmax"),
524  WidthParameters.getParameter<int32_t>("Nbins"),
525  WidthParameters.getParameter<double>("xmin"),
526  WidthParameters.getParameter<double>("xmax"));
527  else
528  local_mes.ChargeOfDigisVsWidth = nullptr;
529  }
530  }
531  // For outer tracker modules (S-type histograms)
532  else {
533  Parameters = config_.getParameter<edm::ParameterSet>("DigiOccupancySH");
534  HistoName.str("");
535  HistoName << "DigiOccupancyS";
536  if (Parameters.getParameter<bool>("switch"))
537  local_mes.DigiOccupancyS = ibooker.book1D(HistoName.str(),
538  HistoName.str(),
539  Parameters.getParameter<int32_t>("Nbins"),
540  Parameters.getParameter<double>("xmin"),
541  Parameters.getParameter<double>("xmax"));
542  else
543  local_mes.DigiOccupancyS = nullptr;
544 
545  HistoName.str("");
546  HistoName << "DigiOccupancyVsEtaS";
547  if (Parameters.getParameter<bool>("switch") && EtaParameters.getParameter<bool>("switch"))
548  local_mes.EtaOccupancyProfS = ibooker.bookProfile(HistoName.str(),
549  HistoName.str(),
550  EtaParameters.getParameter<int32_t>("Nbins"),
551  EtaParameters.getParameter<double>("xmin"),
552  EtaParameters.getParameter<double>("xmax"),
553  Parameters.getParameter<double>("xmin"),
554  Parameters.getParameter<double>("xmax"),
555  "");
556  else
557  local_mes.EtaOccupancyProfS = nullptr;
558 
559  Parameters = config_.getParameter<edm::ParameterSet>("PositionOfDigisSH");
560  HistoName.str("");
561  HistoName << "PositionOfDigisS";
562  if (Parameters.getParameter<bool>("switch"))
563  local_mes.PositionOfDigisS = ibooker.book2D(HistoName.str(),
564  HistoName.str(),
565  Parameters.getParameter<int32_t>("Nxbins"),
566  Parameters.getParameter<double>("xmin"),
567  Parameters.getParameter<double>("xmax"),
568  Parameters.getParameter<int32_t>("Nybins"),
569  Parameters.getParameter<double>("ymin"),
570  Parameters.getParameter<double>("ymax"));
571  else
572  local_mes.PositionOfDigisS = nullptr;
573 
574  // For standalone clusteriser
575  if (clsFlag_) {
576  Parameters = config_.getParameter<edm::ParameterSet>("ClusterPositionSH");
577  HistoName.str("");
578  HistoName << "ClusterPositionS";
579  if (Parameters.getParameter<bool>("switch"))
580  local_mes.ClusterPositionS = ibooker.book2D(HistoName.str(),
581  HistoName.str(),
582  Parameters.getParameter<int32_t>("Nxbins"),
583  Parameters.getParameter<double>("xmin"),
584  Parameters.getParameter<double>("xmax"),
585  Parameters.getParameter<int32_t>("Nybins"),
586  Parameters.getParameter<double>("ymin"),
587  Parameters.getParameter<double>("ymax"));
588  else
589  local_mes.ClusterPositionS = nullptr;
590  }
591  // Only for the S-type sensor of PS module
592  // FracOfOverThresholdBits is only available for S-type sensor of PS module
593  if (isPStypeModForTEDD_1 || isPStypeModForTEDD_2) {
594  HistoName.str("");
595  HistoName << "FractionOfOverThresholdDigis";
596  local_mes.FractionOfOvTBits = ibooker.book1D(HistoName.str(), HistoName.str(), 11, -0.05, 1.05);
597 
598  Parameters = config_.getParameter<edm::ParameterSet>("NumberOfDigisPerDetH");
599  HistoName.str("");
600  HistoName << "FractionOfOverThresholdDigisVaEta";
601  if (Parameters.getParameter<bool>("switch") && EtaParameters.getParameter<bool>("switch"))
602  local_mes.FractionOfOvTBitsVsEta = ibooker.bookProfile(HistoName.str(),
603  HistoName.str(),
604  EtaParameters.getParameter<int32_t>("Nbins"),
605  EtaParameters.getParameter<double>("xmin"),
606  EtaParameters.getParameter<double>("xmax"),
607  Parameters.getParameter<double>("xmin"),
608  Parameters.getParameter<double>("xmax"),
609  "");
610  else
611  local_mes.FractionOfOvTBitsVsEta = nullptr;
612  }
613  }
614 
615  // Plots for P-type sensor (Pixel or P-side of PS module)
616  if (isPtypeSensor) {
617  Parameters = config_.getParameter<edm::ParameterSet>("DigiOccupancyPH");
618  HistoName.str("");
619  HistoName << "DigiOccupancyP";
620  if (Parameters.getParameter<bool>("switch"))
621  local_mes.DigiOccupancyP = ibooker.book1D(HistoName.str(),
622  HistoName.str(),
623  Parameters.getParameter<int32_t>("Nbins"),
624  Parameters.getParameter<double>("xmin"),
625  Parameters.getParameter<double>("xmax"));
626  else
627  local_mes.DigiOccupancyP = nullptr;
628 
629  HistoName.str("");
630  HistoName << "DigiOccupancyVsEtaP";
631  if (Parameters.getParameter<bool>("switch") && EtaParameters.getParameter<bool>("switch"))
632  local_mes.EtaOccupancyProfP = ibooker.bookProfile(HistoName.str(),
633  HistoName.str(),
634  EtaParameters.getParameter<int32_t>("Nbins"),
635  EtaParameters.getParameter<double>("xmin"),
636  EtaParameters.getParameter<double>("xmax"),
637  Parameters.getParameter<double>("xmin"),
638  Parameters.getParameter<double>("xmax"),
639  "");
640  else
641  local_mes.EtaOccupancyProfP = nullptr;
642 
643  Parameters = config_.getParameter<edm::ParameterSet>("PositionOfDigisPH");
644  HistoName.str("");
645  HistoName << "PositionOfDigisP";
646  if (Parameters.getParameter<bool>("switch"))
647  local_mes.PositionOfDigisP = ibooker.book2D(HistoName.str(),
648  HistoName.str(),
649  Parameters.getParameter<int32_t>("Nxbins"),
650  Parameters.getParameter<double>("xmin"),
651  Parameters.getParameter<double>("xmax"),
652  Parameters.getParameter<int32_t>("Nybins"),
653  Parameters.getParameter<double>("ymin"),
654  Parameters.getParameter<double>("ymax"));
655  else
656  local_mes.PositionOfDigisP = nullptr;
657 
658  if (clsFlag_) {
659  Parameters = config_.getParameter<edm::ParameterSet>("ClusterPositionPH");
660  HistoName.str("");
661  HistoName << "ClusterPositionP";
662  if (Parameters.getParameter<bool>("switch"))
663  local_mes.ClusterPositionP = ibooker.book2D(HistoName.str(),
664  HistoName.str(),
665  Parameters.getParameter<int32_t>("Nxbins"),
666  Parameters.getParameter<double>("xmin"),
667  Parameters.getParameter<double>("xmax"),
668  Parameters.getParameter<int32_t>("Nybins"),
669  Parameters.getParameter<double>("ymin"),
670  Parameters.getParameter<double>("ymax"));
671  else
672  local_mes.ClusterPositionP = nullptr;
673  }
674  }
675 
676  // Plots for Standalone clusters (Can be switched on from configs)
677  if (clsFlag_) {
678  Parameters = config_.getParameter<edm::ParameterSet>("NumberOfClustersPerDetH");
679  HistoName.str("");
680  HistoName << "NumberOfClustersPerDet";
681  if (Parameters.getParameter<bool>("switch"))
682  local_mes.NumberOfClustersPerDet = ibooker.book1D(HistoName.str(),
683  HistoName.str(),
684  Parameters.getParameter<int32_t>("Nbins"),
685  Parameters.getParameter<double>("xmin"),
686  Parameters.getParameter<double>("xmax"));
687  else
688  local_mes.NumberOfClustersPerDet = nullptr;
689 
690  Parameters = config_.getParameter<edm::ParameterSet>("ClusterWidthH");
691  HistoName.str("");
692  HistoName << "ClusterWidth";
693  if (Parameters.getParameter<bool>("switch"))
694  local_mes.ClusterWidth = ibooker.book1D(HistoName.str(),
695  HistoName.str(),
696  Parameters.getParameter<int32_t>("Nbins"),
697  Parameters.getParameter<double>("xmin"),
698  Parameters.getParameter<double>("xmax"));
699  else
700  local_mes.ClusterWidth = nullptr;
701  }
702 
703  layerMEs.insert(std::make_pair(key, local_mes));
704  }
705 }

References dqm::implementation::IBooker::book1D(), dqm::implementation::IBooker::book2D(), dqm::implementation::IBooker::bookProfile(), dqm::implementation::NavigatorBase::cd(), Phase2TrackerMonitorDigi::DigiMEs::ChargeOfDigis, Phase2TrackerMonitorDigi::DigiMEs::ChargeOfDigisVsWidth, Phase2TrackerMonitorDigi::DigiMEs::ChargeXYMap, clsFlag_, Phase2TrackerMonitorDigi::DigiMEs::ClusterPositionP, Phase2TrackerMonitorDigi::DigiMEs::ClusterPositionS, Phase2TrackerMonitorDigi::DigiMEs::ClusterWidth, config_, Phase2TrackerMonitorDigi::DigiMEs::DigiOccupancyP, Phase2TrackerMonitorDigi::DigiMEs::DigiOccupancyS, Phase2TrackerMonitorDigi::DigiMEs::EtaOccupancyProfP, Phase2TrackerMonitorDigi::DigiMEs::EtaOccupancyProfS, fed_dqm_sourceclient-live_cfg::folder_name, Phase2TrackerMonitorDigi::DigiMEs::FractionOfOvTBits, Phase2TrackerMonitorDigi::DigiMEs::FractionOfOvTBitsVsEta, getHistoId(), TrackerTopology::getITPixelLayerNumber(), TrackerTopology::getOTLayerNumber(), edm::ParameterSet::getParameter(), crabWrapper::key, phase1PixelTopology::layer, layerMEs, Phase2TrackerMonitorDigi::DigiMEs::nDigiPerLayer, Phase2TrackerMonitorDigi::DigiMEs::nHitDetsPerLayer, Phase2TrackerMonitorDigi::DigiMEs::NumberOfClustersPerDet, Phase2TrackerMonitorDigi::DigiMEs::NumberOfDigisPerDet, Phase2TrackerMonitorDigi::DigiMEs::NumberOfHitDetectorsPerLayer, pixelFlag_, Phase2TrackerMonitorDigi::DigiMEs::PositionOfDigisP, Phase2TrackerMonitorDigi::DigiMEs::PositionOfDigisS, dqm::implementation::NavigatorBase::setCurrentFolder(), AlCaHLTBitMon_QueryRunRegistry::string, TrackerTopology::tidRing(), TrackerTopology::tidWheel(), Phase2TrackerMonitorDigi::DigiMEs::TotalNumberOfDigisPerLayer, funct::true, and tTopo_.

Referenced by bookHistograms().

◆ dqmBeginRun()

void Phase2TrackerMonitorDigi::dqmBeginRun ( const edm::Run &  iRun,
const edm::EventSetup &  iSetup 
)
overridevirtual

Reimplemented from DQMEDAnalyzer.

Definition at line 71 of file Phase2TrackerMonitorDigi.cc.

71  {
72  tkGeom_ = &iSetup.getData(geomToken_);
73  tTopo_ = &iSetup.getData(topoToken_);
74 }

References geomToken_, edm::EventSetup::getData(), tkGeom_, topoToken_, and tTopo_.

◆ fillDigiClusters()

void Phase2TrackerMonitorDigi::fillDigiClusters ( DigiMEs &  mes,
std::vector< Ph2DigiCluster > &  digi_clusters 
)
private

Definition at line 714 of file Phase2TrackerMonitorDigi.cc.

714  {
715  int nclus = digi_clusters.size();
716  if (mes.NumberOfClustersPerDet)
717  mes.NumberOfClustersPerDet->Fill(nclus);
718  for (auto& iclus : digi_clusters) {
719  if (mes.ClusterWidth)
720  mes.ClusterWidth->Fill(iclus.width);
721  if (pixelFlag_ && mes.ChargeOfDigisVsWidth)
722  mes.ChargeOfDigisVsWidth->Fill(iclus.charge, iclus.width);
723  if (mes.ClusterPositionP)
724  mes.ClusterPositionP->Fill(iclus.position, iclus.column + 1);
725  if (!pixelFlag_ && mes.ClusterPositionS && iclus.column <= 2)
726  mes.ClusterPositionS->Fill(iclus.position, iclus.column + 1);
727  }
728 }

References Phase2TrackerMonitorDigi::DigiMEs::ChargeOfDigisVsWidth, Phase2TrackerMonitorDigi::DigiMEs::ClusterPositionP, Phase2TrackerMonitorDigi::DigiMEs::ClusterPositionS, Phase2TrackerMonitorDigi::DigiMEs::ClusterWidth, dqm::impl::MonitorElement::Fill(), Phase2TrackerMonitorDigi::DigiMEs::NumberOfClustersPerDet, and pixelFlag_.

Referenced by fillITPixelDigiHistos(), and fillOTDigiHistos().

◆ fillITPixelDigiHistos()

void Phase2TrackerMonitorDigi::fillITPixelDigiHistos ( const edm::Handle< edm::DetSetVector< PixelDigi >>  handle)
private

Definition at line 94 of file Phase2TrackerMonitorDigi.cc.

94  {
95  const edm::DetSetVector<PixelDigi>* digis = handle.product();
96 
97  for (typename edm::DetSetVector<PixelDigi>::const_iterator DSViter = digis->begin(); DSViter != digis->end();
98  DSViter++) {
99  unsigned int rawid = DSViter->id;
100  edm::LogInfo("Phase2TrackerMonitorDigi") << " Det Id = " << rawid;
101 
102  int layer = tTopo_->getITPixelLayerNumber(rawid);
103 
104  if (layer < 0)
105  continue;
106  const DetId detId(rawid);
107 
108  std::string key = getHistoId(rawid, pixelFlag_);
109  std::map<std::string, DigiMEs>::iterator pos = layerMEs.find(key);
110 
111  if (pos == layerMEs.end())
112  continue;
113 
114  if (DetId(detId).det() != DetId::Detector::Tracker)
115  continue;
116 
117  const GeomDetUnit* gDetUnit = tkGeom_->idToDetUnit(detId);
118  const GeomDet* geomDet = tkGeom_->idToDet(detId);
119 
120  const Phase2TrackerGeomDetUnit* tkDetUnit = dynamic_cast<const Phase2TrackerGeomDetUnit*>(gDetUnit);
121  int nRows = tkDetUnit->specificTopology().nrows();
122  int nColumns = tkDetUnit->specificTopology().ncolumns();
123  if (nRows * nColumns == 0)
124  continue;
125 
126  DigiMEs& local_mes = pos->second;
127 
128  local_mes.nHitDetsPerLayer++;
129 
130  int nDigi = 0;
131  int row_last = -1;
132  int col_last = -1;
133  std::vector<Ph2DigiCluster> digiClusters;
134  for (typename edm::DetSet<PixelDigi>::const_iterator di = DSViter->begin(); di != DSViter->end(); di++) {
135  int col = di->column(); // column
136  int row = di->row(); // row
137  int adc = di->adc(); // digi charge
138  if (geomDet) {
139  MeasurementPoint mp(row + 0.5, col + 0.5);
140  GlobalPoint pdPos = geomDet->surface().toGlobal(gDetUnit->topology().localPosition(mp));
141  if (XYPositionMap)
142  XYPositionMap->Fill(pdPos.x() * 10., pdPos.y() * 10.);
143  if (RZPositionMap)
144  RZPositionMap->Fill(pdPos.z() * 10., std::hypot(pdPos.x(), pdPos.y()) * 10.);
145  }
146  nDigi++;
147  edm::LogInfo("Phase2TrackerMonitorDigi") << " column " << col << " row " << row << std::dec << std::endl;
148  if (local_mes.ChargeXYMap)
149  local_mes.ChargeXYMap->Fill(col, row, adc);
150  if (local_mes.PositionOfDigisP)
151  local_mes.PositionOfDigisP->Fill(row + 1, col + 1);
152  if (local_mes.ChargeOfDigis)
153  local_mes.ChargeOfDigis->Fill(adc);
154  if (clsFlag_) {
155  if (row_last == -1 || abs(row - row_last) != 1 || col != col_last) {
156  Ph2DigiCluster dClus;
157  dClus.position = row + 1;
158  dClus.column = col;
159  dClus.width = 1;
160  dClus.charge = 255;
161  digiClusters.push_back(dClus);
162  } else {
163  int pos = digiClusters.back().position + row + 1;
164  int width = digiClusters.back().width + 1;
165  pos /= width;
166 
167  digiClusters.back().position = pos;
168  digiClusters.back().width += 1;
169  }
170  edm::LogInfo("Phase2TrackerMonitorDigi") << " row " << row << " col " << col << " row_last " << row_last
171  << " col_last " << col_last << " width " << digiClusters.back().width;
172  row_last = row;
173  col_last = col;
174  }
175  }
176  if (local_mes.NumberOfDigisPerDet)
177  local_mes.NumberOfDigisPerDet->Fill(nDigi);
178  if (clsFlag_)
179  fillDigiClusters(local_mes, digiClusters);
180  local_mes.nDigiPerLayer += nDigi;
181  float occupancy = 1.0;
182  if (nRows * nColumns > 0)
183  occupancy = nDigi * 1.0 / (nRows * nColumns);
184  if (geomDet) {
185  GlobalPoint gp = geomDet->surface().toGlobal(
186  gDetUnit->topology().localPosition(MeasurementPoint(nRows / 2.0, nColumns / 2.0)));
187  if (XYOccupancyMap)
188  XYOccupancyMap->Fill(gp.x() * 10., gp.y() * 10, occupancy);
189  if (RZOccupancyMap)
190  RZOccupancyMap->Fill(gp.z() * 10., std::hypot(gp.x(), gp.y()) * 10., occupancy);
191  if (local_mes.EtaOccupancyProfP)
192  local_mes.EtaOccupancyProfP->Fill(gp.eta(), occupancy);
193  }
194 
195  if (local_mes.DigiOccupancyP)
196  local_mes.DigiOccupancyP->Fill(occupancy);
197  }
198  // Fill histograms after loop over digis are complete
199  for (auto& ilayer : layerMEs) {
200  DigiMEs& local_mes = ilayer.second;
201  if (local_mes.TotalNumberOfDigisPerLayer)
202  local_mes.TotalNumberOfDigisPerLayer->Fill(local_mes.nDigiPerLayer);
203  if (local_mes.NumberOfHitDetectorsPerLayer)
204  local_mes.NumberOfHitDetectorsPerLayer->Fill(local_mes.nHitDetsPerLayer);
205  local_mes.nDigiPerLayer = 0;
206  local_mes.nHitDetsPerLayer = 0;
207  }
208 }

References funct::abs(), gpuClustering::adc, edm::DetSetVector< T >::begin(), Phase2TrackerMonitorDigi::Ph2DigiCluster::charge, Phase2TrackerMonitorDigi::DigiMEs::ChargeOfDigis, Phase2TrackerMonitorDigi::DigiMEs::ChargeXYMap, clsFlag_, cuy::col, Phase2TrackerMonitorDigi::Ph2DigiCluster::column, TauDecayModes::dec, DetId::det(), Phase2TrackerMonitorDigi::DigiMEs::DigiOccupancyP, edm::DetSetVector< T >::end(), Phase2TrackerMonitorDigi::DigiMEs::EtaOccupancyProfP, dqm::impl::MonitorElement::Fill(), fillDigiClusters(), getHistoId(), TrackerTopology::getITPixelLayerNumber(), runTauDisplay::gp, patZpeak::handle, TrackerGeometry::idToDet(), TrackerGeometry::idToDetUnit(), crabWrapper::key, phase1PixelTopology::layer, layerMEs, Topology::localPosition(), PixelTopology::ncolumns(), Phase2TrackerMonitorDigi::DigiMEs::nDigiPerLayer, Phase2TrackerMonitorDigi::DigiMEs::nHitDetsPerLayer, PixelTopology::nrows(), Phase2TrackerMonitorDigi::DigiMEs::NumberOfDigisPerDet, Phase2TrackerMonitorDigi::DigiMEs::NumberOfHitDetectorsPerLayer, pixelFlag_, Phase2TrackerMonitorDigi::Ph2DigiCluster::position, Phase2TrackerMonitorDigi::DigiMEs::PositionOfDigisP, RZOccupancyMap, RZPositionMap, PixelGeomDetUnit::specificTopology(), AlCaHLTBitMon_QueryRunRegistry::string, GeomDet::surface(), tkGeom_, Surface::toGlobal(), GeomDet::topology(), Phase2TrackerMonitorDigi::DigiMEs::TotalNumberOfDigisPerLayer, align::Tracker, tTopo_, ApeEstimator_cff::width, Phase2TrackerMonitorDigi::Ph2DigiCluster::width, PV3DBase< T, PVType, FrameType >::x(), XYOccupancyMap, XYPositionMap, PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

Referenced by analyze().

◆ fillOTDigiHistos()

void Phase2TrackerMonitorDigi::fillOTDigiHistos ( const edm::Handle< edm::DetSetVector< Phase2TrackerDigi >>  handle)
private

Definition at line 209 of file Phase2TrackerMonitorDigi.cc.

209  {
210  const edm::DetSetVector<Phase2TrackerDigi>* digis = handle.product();
211 
212  for (typename edm::DetSetVector<Phase2TrackerDigi>::const_iterator DSViter = digis->begin(); DSViter != digis->end();
213  DSViter++) {
214  unsigned int rawid = DSViter->id;
215  DetId detId(rawid);
216  edm::LogInfo("Phase2TrackerMonitorDigi") << " Det Id = " << rawid;
217  int layer = tTopo_->getOTLayerNumber(rawid);
218  if (layer < 0)
219  continue;
220  std::string key = getHistoId(rawid, pixelFlag_);
221  std::map<std::string, DigiMEs>::iterator pos = layerMEs.find(key);
222  if (pos == layerMEs.end())
223  continue;
224  DigiMEs& local_mes = pos->second;
225 
226  local_mes.nHitDetsPerLayer++;
227  if (DetId(detId).det() != DetId::Detector::Tracker)
228  continue;
229 
230  const GeomDetUnit* gDetUnit = tkGeom_->idToDetUnit(detId);
231  const GeomDet* geomDet = tkGeom_->idToDet(detId);
232 
233  const Phase2TrackerGeomDetUnit* tkDetUnit = dynamic_cast<const Phase2TrackerGeomDetUnit*>(gDetUnit);
234  int nRows = tkDetUnit->specificTopology().nrows();
235  int nColumns = tkDetUnit->specificTopology().ncolumns();
236  if (nRows * nColumns == 0)
237  continue;
238 
239  int nDigi = 0;
240  int row_last = -1;
241  int col_last = -1;
242  float frac_ot = 0.;
243  std::vector<Ph2DigiCluster> digiClusters;
244  for (typename edm::DetSet<Phase2TrackerDigi>::const_iterator di = DSViter->begin(); di != DSViter->end(); di++) {
245  int col = di->column(); // column
246  int row = di->row(); // row
247  const DetId detId(rawid);
248 
249  if (geomDet) {
250  MeasurementPoint mp(row + 0.5, col + 0.5);
251  GlobalPoint pdPos = geomDet->surface().toGlobal(gDetUnit->topology().localPosition(mp));
252  if (XYPositionMap)
253  XYPositionMap->Fill(pdPos.x() * 10., pdPos.y() * 10.);
254  if (RZPositionMap)
255  RZPositionMap->Fill(pdPos.z() * 10., std::hypot(pdPos.x(), pdPos.y()) * 10.);
256  }
257  nDigi++;
258  if (di->overThreshold())
259  frac_ot++;
260  edm::LogInfo("Phase2TrackerMonitorDigi") << " column " << col << " row " << row << std::dec << std::endl;
261  if (nColumns > 2 && local_mes.PositionOfDigisP)
262  local_mes.PositionOfDigisP->Fill(row + 1, col + 1);
263  if (nColumns <= 2 && local_mes.PositionOfDigisS)
264  local_mes.PositionOfDigisS->Fill(row + 1, col + 1);
265 
266  if (clsFlag_) {
267  if (row_last == -1 || abs(row - row_last) != 1 || col != col_last) {
268  Ph2DigiCluster dClus;
269  dClus.position = row + 1;
270  dClus.column = col;
271  dClus.width = 1;
272  dClus.charge = 255;
273  digiClusters.push_back(dClus);
274  } else {
275  int pos = digiClusters.back().position + row + 1;
276  int width = digiClusters.back().width + 1;
277  pos /= width;
278 
279  digiClusters.back().position = pos;
280  digiClusters.back().width += 1;
281  }
282  row_last = row;
283  col_last = col;
284  edm::LogInfo("Phase2TrackerMonitorDigi") << " row " << row << " col " << col << " row_last " << row_last
285  << " col_last " << col_last << " width " << digiClusters.back().width;
286  }
287  }
288  if (local_mes.NumberOfDigisPerDet)
289  local_mes.NumberOfDigisPerDet->Fill(nDigi);
290  if (clsFlag_)
291  fillDigiClusters(local_mes, digiClusters);
292  local_mes.nDigiPerLayer += nDigi;
293  if (nDigi)
294  frac_ot /= nDigi;
295  if (local_mes.FractionOfOvTBits && nColumns <= 2)
296  local_mes.FractionOfOvTBits->Fill(frac_ot);
297 
298  float occupancy = 1.0;
299  if (nRows * nColumns > 0)
300  occupancy = nDigi * 1.0 / (nRows * nColumns);
301  if (geomDet) {
302  GlobalPoint gp = geomDet->surface().toGlobal(gDetUnit->topology().localPosition(MeasurementPoint(0.0, 0.0)));
303  if (XYOccupancyMap)
304  XYOccupancyMap->Fill(gp.x() * 10., gp.y() * 10., occupancy);
305  if (RZOccupancyMap)
306  RZOccupancyMap->Fill(gp.z() * 10., std::hypot(gp.x(), gp.y()) * 10., occupancy);
307  if (nColumns > 2) {
308  if (local_mes.DigiOccupancyP)
309  local_mes.DigiOccupancyP->Fill(occupancy);
310  if (local_mes.EtaOccupancyProfP)
311  local_mes.EtaOccupancyProfP->Fill(gp.eta(), occupancy);
312  } else {
313  if (local_mes.DigiOccupancyS)
314  local_mes.DigiOccupancyS->Fill(occupancy);
315  if (local_mes.EtaOccupancyProfS)
316  local_mes.EtaOccupancyProfS->Fill(gp.eta(), occupancy);
317  if (local_mes.FractionOfOvTBitsVsEta)
318  local_mes.FractionOfOvTBitsVsEta->Fill(gp.eta(), frac_ot);
319  }
320  }
321  }
322  // Fill histograms after loop over digis are complete
323  for (auto& ilayer : layerMEs) {
324  DigiMEs& local_mes = ilayer.second;
325  if (local_mes.TotalNumberOfDigisPerLayer)
326  local_mes.TotalNumberOfDigisPerLayer->Fill(local_mes.nDigiPerLayer);
327  if (local_mes.NumberOfHitDetectorsPerLayer)
328  local_mes.NumberOfHitDetectorsPerLayer->Fill(local_mes.nHitDetsPerLayer);
329  local_mes.nDigiPerLayer = 0;
330  local_mes.nHitDetsPerLayer = 0;
331  }
332 }

References funct::abs(), edm::DetSetVector< T >::begin(), Phase2TrackerMonitorDigi::Ph2DigiCluster::charge, clsFlag_, cuy::col, Phase2TrackerMonitorDigi::Ph2DigiCluster::column, TauDecayModes::dec, DetId::det(), Phase2TrackerMonitorDigi::DigiMEs::DigiOccupancyP, Phase2TrackerMonitorDigi::DigiMEs::DigiOccupancyS, edm::DetSetVector< T >::end(), Phase2TrackerMonitorDigi::DigiMEs::EtaOccupancyProfP, Phase2TrackerMonitorDigi::DigiMEs::EtaOccupancyProfS, dqm::impl::MonitorElement::Fill(), fillDigiClusters(), Phase2TrackerMonitorDigi::DigiMEs::FractionOfOvTBits, Phase2TrackerMonitorDigi::DigiMEs::FractionOfOvTBitsVsEta, getHistoId(), TrackerTopology::getOTLayerNumber(), runTauDisplay::gp, patZpeak::handle, TrackerGeometry::idToDet(), TrackerGeometry::idToDetUnit(), crabWrapper::key, phase1PixelTopology::layer, layerMEs, Topology::localPosition(), PixelTopology::ncolumns(), Phase2TrackerMonitorDigi::DigiMEs::nDigiPerLayer, Phase2TrackerMonitorDigi::DigiMEs::nHitDetsPerLayer, PixelTopology::nrows(), Phase2TrackerMonitorDigi::DigiMEs::NumberOfDigisPerDet, Phase2TrackerMonitorDigi::DigiMEs::NumberOfHitDetectorsPerLayer, pixelFlag_, Phase2TrackerMonitorDigi::Ph2DigiCluster::position, Phase2TrackerMonitorDigi::DigiMEs::PositionOfDigisP, Phase2TrackerMonitorDigi::DigiMEs::PositionOfDigisS, RZOccupancyMap, RZPositionMap, PixelGeomDetUnit::specificTopology(), AlCaHLTBitMon_QueryRunRegistry::string, GeomDet::surface(), tkGeom_, Surface::toGlobal(), GeomDet::topology(), Phase2TrackerMonitorDigi::DigiMEs::TotalNumberOfDigisPerLayer, align::Tracker, tTopo_, ApeEstimator_cff::width, Phase2TrackerMonitorDigi::Ph2DigiCluster::width, PV3DBase< T, PVType, FrameType >::x(), XYOccupancyMap, XYPositionMap, PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

Referenced by analyze().

◆ getHistoId()

std::string Phase2TrackerMonitorDigi::getHistoId ( uint32_t  det_id,
bool  flag 
)

Definition at line 707 of file Phase2TrackerMonitorDigi.cc.

707  {
708  if (flag)
709  return phase2tkutil::getITHistoId(det_id, tTopo_);
710  else
711  return phase2tkutil::getOTHistoId(det_id, tTopo_);
712 }

References RemoveAddSevLevel::flag, phase2tkutil::getITHistoId(), phase2tkutil::getOTHistoId(), and tTopo_.

Referenced by bookLayerHistos(), fillITPixelDigiHistos(), and fillOTDigiHistos().

Member Data Documentation

◆ clsFlag_

bool Phase2TrackerMonitorDigi::clsFlag_
private

Definition at line 73 of file Phase2TrackerMonitorDigi.h.

Referenced by bookLayerHistos(), fillITPixelDigiHistos(), and fillOTDigiHistos().

◆ config_

edm::ParameterSet Phase2TrackerMonitorDigi::config_
private

Definition at line 70 of file Phase2TrackerMonitorDigi.h.

Referenced by bookHistograms(), and bookLayerHistos().

◆ geomToken_

const edm::ESGetToken<TrackerGeometry, TrackerDigiGeometryRecord> Phase2TrackerMonitorDigi::geomToken_
private

Definition at line 79 of file Phase2TrackerMonitorDigi.h.

Referenced by dqmBeginRun().

◆ geomType_

std::string Phase2TrackerMonitorDigi::geomType_
private

Definition at line 74 of file Phase2TrackerMonitorDigi.h.

◆ itPixelDigiSrc_

edm::InputTag Phase2TrackerMonitorDigi::itPixelDigiSrc_
private

Definition at line 76 of file Phase2TrackerMonitorDigi.h.

◆ itPixelDigiToken_

const edm::EDGetTokenT<edm::DetSetVector<PixelDigi> > Phase2TrackerMonitorDigi::itPixelDigiToken_
private

Definition at line 78 of file Phase2TrackerMonitorDigi.h.

Referenced by analyze().

◆ layerMEs

std::map<std::string, DigiMEs> Phase2TrackerMonitorDigi::layerMEs
private

Definition at line 71 of file Phase2TrackerMonitorDigi.h.

Referenced by bookLayerHistos(), fillITPixelDigiHistos(), and fillOTDigiHistos().

◆ otDigiSrc_

edm::InputTag Phase2TrackerMonitorDigi::otDigiSrc_
private

Definition at line 75 of file Phase2TrackerMonitorDigi.h.

◆ otDigiToken_

const edm::EDGetTokenT<edm::DetSetVector<Phase2TrackerDigi> > Phase2TrackerMonitorDigi::otDigiToken_
private

Definition at line 77 of file Phase2TrackerMonitorDigi.h.

Referenced by analyze().

◆ pixelFlag_

bool Phase2TrackerMonitorDigi::pixelFlag_
private

Definition at line 72 of file Phase2TrackerMonitorDigi.h.

Referenced by analyze(), bookLayerHistos(), fillDigiClusters(), fillITPixelDigiHistos(), and fillOTDigiHistos().

◆ RZOccupancyMap

MonitorElement* Phase2TrackerMonitorDigi::RZOccupancyMap

Definition at line 62 of file Phase2TrackerMonitorDigi.h.

Referenced by bookHistograms(), fillITPixelDigiHistos(), and fillOTDigiHistos().

◆ RZPositionMap

MonitorElement* Phase2TrackerMonitorDigi::RZPositionMap

Definition at line 60 of file Phase2TrackerMonitorDigi.h.

Referenced by bookHistograms(), fillITPixelDigiHistos(), and fillOTDigiHistos().

◆ tkGeom_

const TrackerGeometry* Phase2TrackerMonitorDigi::tkGeom_ = nullptr
private

Definition at line 81 of file Phase2TrackerMonitorDigi.h.

Referenced by bookHistograms(), dqmBeginRun(), fillITPixelDigiHistos(), and fillOTDigiHistos().

◆ topoToken_

const edm::ESGetToken<TrackerTopology, TrackerTopologyRcd> Phase2TrackerMonitorDigi::topoToken_
private

Definition at line 80 of file Phase2TrackerMonitorDigi.h.

Referenced by dqmBeginRun().

◆ tTopo_

const TrackerTopology* Phase2TrackerMonitorDigi::tTopo_ = nullptr
private

Definition at line 82 of file Phase2TrackerMonitorDigi.h.

Referenced by bookLayerHistos(), dqmBeginRun(), fillITPixelDigiHistos(), fillOTDigiHistos(), and getHistoId().

◆ XYOccupancyMap

MonitorElement* Phase2TrackerMonitorDigi::XYOccupancyMap

Definition at line 61 of file Phase2TrackerMonitorDigi.h.

Referenced by bookHistograms(), fillITPixelDigiHistos(), and fillOTDigiHistos().

◆ XYPositionMap

MonitorElement* Phase2TrackerMonitorDigi::XYPositionMap

Definition at line 59 of file Phase2TrackerMonitorDigi.h.

Referenced by bookHistograms(), fillITPixelDigiHistos(), and fillOTDigiHistos().

TrackerGeometry::idToDet
const TrackerGeomDet * idToDet(DetId) const override
Definition: TrackerGeometry.cc:193
edm::ESWatcher::check
bool check(const edm::EventSetup &iSetup)
Definition: ESWatcher.h:57
edm::DetSetVector< Phase2TrackerDigi >
Point2DBase
Definition: Point2DBase.h:9
Phase2TrackerMonitorDigi::otDigiToken_
const edm::EDGetTokenT< edm::DetSetVector< Phase2TrackerDigi > > otDigiToken_
Definition: Phase2TrackerMonitorDigi.h:77
ApeEstimator_cff.width
width
Definition: ApeEstimator_cff.py:24
Phase2TrackerMonitorDigi::config_
edm::ParameterSet config_
Definition: Phase2TrackerMonitorDigi.h:70
GeomDet
Definition: GeomDet.h:27
Phase2TrackerMonitorDigi::RZOccupancyMap
MonitorElement * RZOccupancyMap
Definition: Phase2TrackerMonitorDigi.h:62
edm::ESWatcher< TrackerDigiGeometryRecord >
edm::DetSetVector::end
iterator end()
Return the off-the-end iterator.
Definition: DetSetVector.h:325
PV3DBase::x
T x() const
Definition: PV3DBase.h:59
Phase2TrackerMonitorDigi::geomToken_
const edm::ESGetToken< TrackerGeometry, TrackerDigiGeometryRecord > geomToken_
Definition: Phase2TrackerMonitorDigi.h:79
patZpeak.handle
handle
Definition: patZpeak.py:23
TrackerTopology::getITPixelLayerNumber
int getITPixelLayerNumber(const DetId &id) const
Definition: TrackerTopology.cc:436
TrackerTopology::getOTLayerNumber
int getOTLayerNumber(const DetId &id) const
Definition: TrackerTopology.cc:421
edm
HLT enums.
Definition: AlignableModifier.h:19
gpuClustering::adc
uint16_t *__restrict__ uint16_t const *__restrict__ adc
Definition: gpuClusterChargeCut.h:20
dqm::implementation::IBooker::bookProfile2D
MonitorElement * bookProfile2D(TString const &name, TString const &title, int nchX, double lowX, double highX, int nchY, double lowY, double highY, double lowZ, double highZ, char const *option="s", FUNC onbooking=NOOP())
Definition: DQMStore.h:399
DetId::det
constexpr Detector det() const
get the detector field from this detid
Definition: DetId.h:46
cuy.col
col
Definition: cuy.py:1009
pos
Definition: PixelAliasList.h:18
Phase2TrackerMonitorDigi::geomType_
std::string geomType_
Definition: Phase2TrackerMonitorDigi.h:74
dqm::implementation::NavigatorBase::setCurrentFolder
virtual void setCurrentFolder(std::string const &fullpath)
Definition: DQMStore.cc:32
edm::DetSetVector::begin
iterator begin()
Return an iterator to the first DetSet.
Definition: DetSetVector.h:314
GeomDet::topology
virtual const Topology & topology() const
Definition: GeomDet.cc:67
Phase2TrackerMonitorDigi::clsFlag_
bool clsFlag_
Definition: Phase2TrackerMonitorDigi.h:73
Phase2TrackerMonitorDigi::otDigiSrc_
edm::InputTag otDigiSrc_
Definition: Phase2TrackerMonitorDigi.h:75
Topology::localPosition
virtual LocalPoint localPosition(const MeasurementPoint &) const =0
Phase2TrackerMonitorDigi::fillOTDigiHistos
void fillOTDigiHistos(const edm::Handle< edm::DetSetVector< Phase2TrackerDigi >> handle)
Definition: Phase2TrackerMonitorDigi.cc:209
Phase2TrackerMonitorDigi::itPixelDigiSrc_
edm::InputTag itPixelDigiSrc_
Definition: Phase2TrackerMonitorDigi.h:76
Phase2TrackerMonitorDigi::XYOccupancyMap
MonitorElement * XYOccupancyMap
Definition: Phase2TrackerMonitorDigi.h:61
edm::LogInfo
Log< level::Info, false > LogInfo
Definition: MessageLogger.h:125
TrackerTopology::tidRing
unsigned int tidRing(const DetId &id) const
Definition: TrackerTopology.h:218
TrackerTopology::tidWheel
unsigned int tidWheel(const DetId &id) const
Definition: TrackerTopology.h:201
align::Tracker
Definition: StructureType.h:70
TrackerGeometry::idToDetUnit
const TrackerGeomDet * idToDetUnit(DetId) const override
Return the pointer to the GeomDetUnit corresponding to a given DetId.
Definition: TrackerGeometry.cc:183
PV3DBase::z
T z() const
Definition: PV3DBase.h:61
Phase2TrackerMonitorDigi::XYPositionMap
MonitorElement * XYPositionMap
Definition: Phase2TrackerMonitorDigi.h:59
DetId
Definition: DetId.h:17
GeomDet::surface
const Plane & surface() const
The nominal surface of the GeomDet.
Definition: GeomDet.h:37
TrackerGeometry::detUnits
const DetContainer & detUnits() const override
Returm a vector of all GeomDet.
Definition: TrackerGeometry.h:61
PixelGeomDetUnit
Definition: PixelGeomDetUnit.h:15
dqm::impl::MonitorElement::Fill
void Fill(long long x)
Definition: MonitorElement.h:290
Surface::toGlobal
GlobalPoint toGlobal(const Point2DBase< Scalar, LocalTag > lp) const
Definition: Surface.h:79
dqm::implementation::NavigatorBase::cd
virtual void cd()
Definition: DQMStore.cc:29
dqm::implementation::IBooker::bookProfile
MonitorElement * bookProfile(TString const &name, TString const &title, int nchX, double lowX, double highX, int, double lowY, double highY, char const *option="s", FUNC onbooking=NOOP())
Definition: DQMStore.h:322
PixelTopology::ncolumns
virtual int ncolumns() const =0
Phase2TrackerMonitorDigi::tTopo_
const TrackerTopology * tTopo_
Definition: Phase2TrackerMonitorDigi.h:82
Point3DBase< float, GlobalTag >
phase1PixelTopology::layer
constexpr std::array< uint8_t, layerIndexSize > layer
Definition: phase1PixelTopology.h:99
Phase2TrackerMonitorDigi::fillITPixelDigiHistos
void fillITPixelDigiHistos(const edm::Handle< edm::DetSetVector< PixelDigi >> handle)
Definition: Phase2TrackerMonitorDigi.cc:94
runTauDisplay.gp
gp
Definition: runTauDisplay.py:431
MeasurementPoint
Measurement2DPoint MeasurementPoint
Measurement points are two-dimensional by default.
Definition: MeasurementPoint.h:12
funct::true
true
Definition: Factorize.h:173
edm::ParameterSet
Definition: ParameterSet.h:47
edm::DetSetVector::const_iterator
collection_type::const_iterator const_iterator
Definition: DetSetVector.h:102
PixelGeomDetUnit::specificTopology
virtual const PixelTopology & specificTopology() const
Returns a reference to the pixel proxy topology.
Definition: PixelGeomDetUnit.cc:17
Phase2TrackerMonitorDigi::getHistoId
std::string getHistoId(uint32_t det_id, bool flag)
Definition: Phase2TrackerMonitorDigi.cc:707
fed_dqm_sourceclient-live_cfg.folder_name
folder_name
Definition: fed_dqm_sourceclient-live_cfg.py:42
PV3DBase::y
T y() const
Definition: PV3DBase.h:60
iEvent
int iEvent
Definition: GenABIO.cc:224
cscdqm::HistoName
std::string HistoName
Definition: CSCDQM_HistoDef.h:32
Phase2TrackerMonitorDigi::layerMEs
std::map< std::string, DigiMEs > layerMEs
Definition: Phase2TrackerMonitorDigi.h:71
Phase2TrackerMonitorDigi::bookLayerHistos
void bookLayerHistos(DQMStore::IBooker &ibooker, unsigned int det_id)
Definition: Phase2TrackerMonitorDigi.cc:412
Phase2TrackerMonitorDigi::itPixelDigiToken_
const edm::EDGetTokenT< edm::DetSetVector< PixelDigi > > itPixelDigiToken_
Definition: Phase2TrackerMonitorDigi.h:78
AlCaHLTBitMon_QueryRunRegistry.string
string string
Definition: AlCaHLTBitMon_QueryRunRegistry.py:256
Phase2TrackerMonitorDigi::fillDigiClusters
void fillDigiClusters(DigiMEs &mes, std::vector< Ph2DigiCluster > &digi_clusters)
Definition: Phase2TrackerMonitorDigi.cc:714
edm::EventSetup::getData
bool getData(T &iHolder) const
Definition: EventSetup.h:127
phase2tkutil::getITHistoId
std::string getITHistoId(uint32_t det_id, const TrackerTopology *tTopo)
Definition: TrackerPhase2DQMUtil.cc:2
dqm::implementation::IBooker::book2D
MonitorElement * book2D(TString const &name, TString const &title, int nchX, double lowX, double highX, int nchY, double lowY, double highY, FUNC onbooking=NOOP())
Definition: DQMStore.h:177
edm::ParameterSet::getParameter
T getParameter(std::string const &) const
Definition: ParameterSet.h:303
Phase2TrackerMonitorDigi::tkGeom_
const TrackerGeometry * tkGeom_
Definition: Phase2TrackerMonitorDigi.h:81
Phase2TrackerMonitorDigi::topoToken_
const edm::ESGetToken< TrackerTopology, TrackerTopologyRcd > topoToken_
Definition: Phase2TrackerMonitorDigi.h:80
funct::abs
Abs< T >::type abs(const T &t)
Definition: Abs.h:22
PixelTopology::nrows
virtual int nrows() const =0
Parameters
vector< ParameterSet > Parameters
Definition: HLTMuonPlotter.cc:25
crabWrapper.key
key
Definition: crabWrapper.py:19
TauDecayModes.dec
dec
Definition: TauDecayModes.py:142
edm::InputTag
Definition: InputTag.h:15
phase2tkutil::getOTHistoId
std::string getOTHistoId(uint32_t det_id, const TrackerTopology *tTopo)
Definition: TrackerPhase2DQMUtil.cc:25
dqm::implementation::IBooker::book1D
MonitorElement * book1D(TString const &name, TString const &title, int const nchX, double const lowX, double const highX, FUNC onbooking=NOOP())
Definition: DQMStore.h:98
RemoveAddSevLevel.flag
flag
Definition: RemoveAddSevLevel.py:117
Phase2TrackerMonitorDigi::pixelFlag_
bool pixelFlag_
Definition: Phase2TrackerMonitorDigi.h:72
Phase2TrackerMonitorDigi::RZPositionMap
MonitorElement * RZPositionMap
Definition: Phase2TrackerMonitorDigi.h:60
edm::DetSet::const_iterator
collection_type::const_iterator const_iterator
Definition: DetSet.h:31
Generated for CMSSW Reference Manual by doxygen 1.8.16