EcalTools.cc

Go to the documentation of this file.

 
#include "RecoEcal/EgammaCoreTools/interface/EcalTools.h"
#include "DataFormats/EcalDetId/interface/EBDetId.h"
#include "DataFormats/EcalDetId/interface/EEDetId.h"
#include "FWCore/Framework/interface/ESHandle.h"
#include "FWCore/Framework/interface/EventSetup.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"
 
float EcalTools::swissCross(const DetId& id,
                            const EcalRecHitCollection& recHits,
                            float recHitThreshold,
                            bool avoidIeta85) {
  // compute swissCross
  if (id.subdetId() == EcalBarrel) {
    EBDetId ebId(id);
    // avoid recHits at |eta|=85 where one side of the neighbours is missing
    // (may improve considering also eta module borders, but no
    // evidence for the time being that there the performance is
    // different)
    if (abs(ebId.ieta()) == 85 && avoidIeta85)
      return 0;
    // select recHits with Et above recHitThreshold
    if (recHitApproxEt(id, recHits) < recHitThreshold)
      return 0;
    float s4 = 0;
    float e1 = recHitE(id, recHits);
    // protect against nan (if 0 threshold is given above)
    if (e1 == 0)
      return 0;
    s4 += recHitE(id, recHits, 1, 0);
    s4 += recHitE(id, recHits, -1, 0);
    s4 += recHitE(id, recHits, 0, 1);
    s4 += recHitE(id, recHits, 0, -1);
    return 1 - s4 / e1;
  } else if (id.subdetId() == EcalEndcap) {
    EEDetId eeId(id);
    // select recHits with E above recHitThreshold
    float e1 = recHitE(id, recHits);
    if (e1 < recHitThreshold)
      return 0;
    float s4 = 0;
    // protect against nan (if 0 threshold is given above)
    if (e1 == 0)
      return 0;
    s4 += recHitE(id, recHits, 1, 0);
    s4 += recHitE(id, recHits, -1, 0);
    s4 += recHitE(id, recHits, 0, 1);
    s4 += recHitE(id, recHits, 0, -1);
    return 1 - s4 / e1;
  }
  return 0;
}
 
bool EcalTools::isNextToDead(const DetId& id, const EcalNextToDeadChannel& dch) {
  EcalNextToDeadChannel::const_iterator chIt = dch.find(id);
 
  if (chIt != dch.end()) {
    return *chIt;
  } else {
    edm::LogError("EcalDBError") << "No NextToDead  status found for xtal " << id.rawId();
  }
 
  return false;
}
 
bool EcalTools::isNextToDeadFromNeighbours(const DetId& id, const EcalChannelStatus& chs, int chStatusThreshold) {
  if (deadNeighbour(id, chs, chStatusThreshold, 1, 0))
    return true;
  if (deadNeighbour(id, chs, chStatusThreshold, -1, 0))
    return true;
  if (deadNeighbour(id, chs, chStatusThreshold, 0, 1))
    return true;
  if (deadNeighbour(id, chs, chStatusThreshold, 0, -1))
    return true;
  if (deadNeighbour(id, chs, chStatusThreshold, 1, -1))
    return true;
  if (deadNeighbour(id, chs, chStatusThreshold, 1, 1))
    return true;
  if (deadNeighbour(id, chs, chStatusThreshold, -1, 1))
    return true;
  if (deadNeighbour(id, chs, chStatusThreshold, -1, -1))
    return true;
 
  return false;
}
 
bool EcalTools::deadNeighbour(const DetId& id, const EcalChannelStatus& chs, int chStatusThreshold, int dx, int dy) {
  DetId nid;
  if (id.subdetId() == EcalBarrel)
    nid = EBDetId::offsetBy(id, dx, dy);
  else if (id.subdetId() == EcalEndcap)
    nid = EEDetId::offsetBy(id, dx, dy);
 
  if (!nid)
    return false;
 
  EcalChannelStatus::const_iterator chIt = chs.find(nid);
  uint16_t dbStatus = 0;
  if (chIt != chs.end()) {
    // note that
    dbStatus = chIt->getStatusCode();
  } else {
    edm::LogError("EcalDBError") << "No channel status found for xtal " << id.rawId()
                                 << "! something wrong with EcalChannelStatus in your DB? ";
  }
 
  return (dbStatus >= chStatusThreshold);
}
 
float EcalTools::recHitE(const DetId id, const EcalRecHitCollection& recHits, int di, int dj) {
  // in the barrel:   di = dEta   dj = dPhi
  // in the endcap:   di = dX     dj = dY
 
  DetId nid;
  if (id.subdetId() == EcalBarrel)
    nid = EBDetId::offsetBy(id, di, dj);
  else if (id.subdetId() == EcalEndcap)
    nid = EEDetId::offsetBy(id, di, dj);
 
  return (nid == DetId(0) ? 0 : recHitE(nid, recHits));
}
 
float EcalTools::recHitE(const DetId id, const EcalRecHitCollection& recHits) {
  if (id == DetId(0)) {
    return 0;
  } else {
    EcalRecHitCollection::const_iterator it = recHits.find(id);
    if (it != recHits.end())
      return (*it).energy();
  }
  return 0;
}
 
float EcalTools::recHitApproxEt(const DetId id, const EcalRecHitCollection& recHits) {
  // for the time being works only for the barrel
  if (id.subdetId() == EcalBarrel) {
    return recHitE(id, recHits) / cosh(EBDetId::approxEta(id));
  }
  return 0;
}
 
bool isNextToBoundary(const DetId& id) {
  if (id.subdetId() == EcalBarrel)
    return EBDetId::isNextToBoundary(EBDetId(id));
  else if (id.subdetId() == EcalEndcap)
    return EEDetId::isNextToBoundary(EEDetId(id));
 
  return false;
}