DTTMax.cc

Go to the documentation of this file.

/*
 *  See header file for a description of this class.
 *
 *  \author Marina Giunta
 */
 
#include "CalibMuon/DTCalibration/interface/DTTMax.h"
#include "Geometry/DTGeometry/interface/DTLayer.h"
#include "Geometry/DTGeometry/interface/DTSuperLayer.h"
#include "CalibMuon/DTDigiSync/interface/DTTTrigBaseSync.h"
// Declare histograms for debugging purposes
//#include "CalibMuon/DTCalibration/interface/Histogram.h"
 
#include <map>
#include <iostream>
 
using namespace std;
using namespace dttmaxenums;
using namespace DTEnums;
 
DTTMax::InfoLayer::InfoLayer(
    const DTRecHit1D& rh_, const DTSuperLayer& isl, GlobalVector dir, GlobalPoint pos, const DTTTrigBaseSync& sync)
    : rh(rh_), idWire(rh.wireId()), lr(rh.lrSide()) {
  const DTLayer* layer = isl.layer(idWire.layerId());
  LocalPoint wirePosInLayer(layer->specificTopology().wirePosition(idWire.wire()), 0, 0);
  LocalPoint wirePosInSL = isl.toLocal(layer->toGlobal(wirePosInLayer));
  wireX = wirePosInSL.x();
 
  //-- Correction for signal propagation along wire, t0 subtraction,
  LocalVector segDir = layer->toLocal(dir);
  LocalPoint segPos = layer->toLocal(pos);
  LocalPoint segPosAtLayer = segPos + segDir * (-segPos.z()) / cos(segDir.theta());
  LocalPoint hitPos(rh.localPosition().x(), segPosAtLayer.y(), 0.);
  time = rh.digiTime() - sync.offset(layer, idWire, layer->toGlobal(hitPos));
 
  if (time < 0. || time > 415.) {
    // FIXME introduce time window to reject "out-of-time" digis
    cout << " *** WARNING time = " << time << endl;
  }
}
 
DTTMax::DTTMax(const vector<DTRecHit1D>& hits,
               const DTSuperLayer& isl,
               GlobalVector dir,
               GlobalPoint pos,
               const DTTTrigBaseSync& sync,
               dtcalibration::Histograms& hist)
    : theInfoLayers(4, (InfoLayer*)nullptr),  //FIXME
      theTMaxes(4, (TMax*)nullptr) {
  // debug parameter for verbose output
  debug = "true";
 
  // Collect all information using InfoLayer
  for (vector<DTRecHit1D>::const_iterator hit = hits.begin(); hit != hits.end(); ++hit) {
    //     cout << "Hit Pos " << (*hit).localPosition() << endl;
 
    InfoLayer* layInfo = new InfoLayer((*hit), isl, dir, pos, sync);
    int ilay = layInfo->idWire.layer();
    if (getInfoLayer(ilay) == nullptr) {
      getInfoLayer(ilay) = layInfo;
    } else {
      // FIXME: in case there is > 1 hit/layer, the first is taken and the others are IGNORED.
      delete layInfo;
    }
  }
 
  // Get the segment direction
  theSegDir = ((isl.toLocal(dir).x() < 0) ? L : R);
 
  int layersIn = 0;
  int nGoodHits = 0;
  for (vector<InfoLayer*>::const_iterator ilay = theInfoLayers.begin(); ilay != theInfoLayers.end(); ++ilay) {
    if ((*ilay) == nullptr) {
      theSegType += "X";
      continue;
    }
    DTEnums::DTCellSide lOrR = (*ilay)->lr;
    if (lOrR == Left)
      theSegType += "L";
    else if (lOrR == Right)
      theSegType += "R";
    else
      theSegType += "X";
 
    // layersIn : 6 =  layers 1,2,3
    //            7 =         1,2,4
    //            8 =         1,3,4
    //            9 =         2,3,4
    //            10=         1,2,3,4
    layersIn += (*ilay)->idWire.layer();
    nGoodHits++;
  }
 
  if (nGoodHits >= 3 && (theSegType != "RRRR" && theSegType != "LLLL")) {
    float t1 = 0.;
    float t2 = 0.;
    float t3 = 0.;
    float t4 = 0.;
    float x1 = 0.;
    float x2 = 0.;
    float x3 = 0.;
    float x4 = 0.;
 
    if (layersIn <= 8 || layersIn == 10) {
      t1 = getInfoLayer(1)->time;
      x1 = getInfoLayer(1)->wireX;
    }
    if (layersIn <= 7 || layersIn >= 9) {
      t2 = getInfoLayer(2)->time;
      x2 = getInfoLayer(2)->wireX;
    }
    if (layersIn == 6 || layersIn >= 8) {
      t3 = getInfoLayer(3)->time;
      x3 = getInfoLayer(3)->wireX;
    }
    if (layersIn >= 7) {
      t4 = getInfoLayer(4)->time;
      x4 = getInfoLayer(4)->wireX;
    }
 
    float t = 0.;
    TMaxCells cGroup = notInit;
    string type;
    SigmaFactor sigma = noR;  // Return the factor relating the width of the TMax distribution and the cell resolution
    float halfCell = 2.1;     // 2.1 is the half cell length in cm
    float delta = 0.5;        // (diff. wire pos.) < delta, halfCell+delta, .....
    unsigned t0Factor = 99;   // "quantity" of Delta(t0) included in the tmax formula
 
    //Debug
    if (debug) {
      cout << "seg. type: " << theSegType << " and dir: " << theSegDir << endl;
      cout << "t1, t2, t3, t4: " << t1 << " " << t2 << " " << t3 << " " << t4 << endl;
      cout << "x1, x2, x3, x4: " << x1 << " " << x2 << " " << x3 << " " << x4 << endl;
    }
 
    //different t0 hists (if you have at least one hit within a certain distance from the wire)
    unsigned hSubGroup = 99;  //
    if (t1 == 0. || t2 == 0. || t3 == 0. || t4 == 0.)
      hSubGroup = 0;  //if only 3 hits
    else if (t1 <= 5. || t2 <= 5. || t3 <= 5. || t4 <= 5.)
      hSubGroup = 1;  //if distance of one hit from wire < 275um (v_drift=55um/ns)
    else if (t1 <= 10. || t2 <= 10. || t3 <= 10. || t4 <= 10.)
      hSubGroup = 2;
    else if (t1 <= 20. || t2 <= 20. || t3 <= 20. || t4 <= 20.)
      hSubGroup = 3;
    else if (t1 <= 50. || t2 <= 50. || t3 <= 50. || t4 <= 50.)
      hSubGroup = 4;
 
    if ((layersIn == 6 || layersIn == 10) && (fabs(x1 - x3) < delta)) {
      cGroup = c123;
      ((type += theSegType[0]) += theSegType[1]) += theSegType[2];
      sigma = r32;
      if (type == "LRL" || type == "RLR") {
        t0Factor = 2;
        t = (t1 + t3) / 2. + t2;
        hist.hT123LRL->Fill(t);
      } else if ((type == "LLR" && theSegDir == R) || (type == "RRL" && theSegDir == L)) {
        t0Factor = 1;
        t = (t3 - t1) / 2. + t2;
        hist.hT123LLR->Fill(t);
      } else if ((type == "LRR" && theSegDir == R) || (type == "RLL" && theSegDir == L)) {
        t0Factor = 1;
        t = (t1 - t3) / 2. + t2;
        hist.hT123LRR->Fill(t);
      } else {
        t = -1.;
        sigma = noR;
        hist.hT123Bad->Fill(t);
      }
      theTMaxes[cGroup] = new TMax(t, cGroup, type, sigma, t0Factor, hSubGroup);
      if (debug)
        cout << "tmax123 " << t << " " << type << endl;
    }
    if (layersIn == 7 || layersIn == 10) {
      cGroup = c124;
      type.clear();
      sigma = r72;
      ((type += theSegType[0]) += theSegType[1]) += theSegType[3];
      if ((theSegType == "LRLR" && type == "LRR" && x1 > x4) || (theSegType == "RLRL" && type == "RLL" && x1 < x4)) {
        t0Factor = 2;
        t = 1.5 * t2 + t1 - t4 / 2.;
        hist.hT124LRR1gt4->Fill(t);
      } else if ((type == "LLR" && theSegDir == R && (fabs(x2 - x4) < delta) && x1 < x2) ||
                 (type == "RRL" && theSegDir == L && (fabs(x2 - x4) < delta) && x1 > x2)) {
        t0Factor = 1;
        t = 1.5 * t2 - t1 + t4 / 2.;
        hist.hT124LLR->Fill(t);
      } else if ((type == "LLL" && theSegDir == R && (fabs(x2 - x4) < delta) && x1 < x2) ||
                 (type == "RRR" && theSegDir == L && (fabs(x2 - x4) < delta) && x1 > x2)) {
        t0Factor = 0;
        t = 1.5 * t2 - t1 - t4 / 2.;
        hist.hT124LLLR->Fill(t);
      } else if ((type == "LLL" && theSegDir == L && (fabs(x2 - x4) < delta)) ||
                 (type == "RRR" && theSegDir == R && (fabs(x2 - x4) < delta))) {
        t0Factor = 0;
        t = -1.5 * t2 + t1 + t4 / 2.;
        hist.hT124LLLL->Fill(t);
      } else if ((type == "LRL" && theSegDir == L && (fabs(x2 - x4) < delta)) ||
                 (type == "RLR" && theSegDir == R && (fabs(x2 - x4) < delta))) {
        t0Factor = 3;
        t = 1.5 * t2 + t1 + t4 / 2.;
        hist.hT124LRLL->Fill(t);
      } else if ((type == "LRL" && theSegDir == R && (fabs(x1 - x4) < (halfCell + delta))) ||
                 (type == "RLR" && theSegDir == L && (fabs(x1 - x4) < (halfCell + delta)))) {
        t0Factor = 99;  // it's actually 1.5, but this value it's not used
        t = 3. / 4. * t2 + t1 / 2. + t4 / 4.;
        sigma = r78;
        hist.hT124LRLR->Fill(t);
      } else if ((type == "LRR" && theSegDir == R && x1 < x4 && (fabs(x1 - x4) < (halfCell + delta))) ||
                 (type == "RLL" && theSegDir == L && x1 > x4 && (fabs(x1 - x4) < (halfCell + delta)))) {
        t0Factor = 1;
        t = 3. / 4. * t2 + t1 / 2. - t4 / 4.;
        sigma = r78;
        hist.hT124LRR1lt4->Fill(t);
      } else {
        t = -1.;
        sigma = noR;
        hist.hT124Bad->Fill(t);
      }
      theTMaxes[cGroup] = new TMax(t, cGroup, type, sigma, t0Factor, hSubGroup);
      if (debug)
        cout << "tmax124 " << t << " " << t0Factor << " " << type << endl;
    }
    if (layersIn == 8 || layersIn == 10) {
      cGroup = c134;
      type.clear();
      ((type += theSegType[0]) += theSegType[2]) += theSegType[3];
      sigma = r72;
      if ((type == "LLR" && x1 > x4 && theSegType == "LRLR") || (type == "RRL" && x1 < x4 && theSegType == "RLRL")) {
        t0Factor = 2;
        t = 1.5 * t3 + t4 - t1 / 2.;
        hist.hT134LLR1gt4->Fill(t);
      } else if ((type == "LLR" && x1 < x4 && (fabs(x1 - x4) < (halfCell + delta))) ||
                 (type == "RRL" && x1 > x4 && (fabs(x1 - x4) < (halfCell + delta)))) {
        t0Factor = 1;
        t = 3. / 4. * t3 + t4 / 2. - t1 / 4.;
        sigma = r78;
        hist.hT134LLR1lt4->Fill(t);
      } else if ((type == "LRR" && theSegDir == R && x1 < x4 && (fabs(x1 - x3) < delta)) ||
                 (type == "RLL" && theSegDir == L && x1 > x4 && (fabs(x1 - x3) < delta))) {
        t0Factor = 1;
        t = 1.5 * t3 - t4 + t1 / 2.;
        hist.hT134LRR->Fill(t);
      } else if ((type == "LRL" && theSegDir == R && (fabs(x1 - x3) < delta)) ||
                 (type == "RLR" && theSegDir == L && (fabs(x1 - x3) < delta))) {
        t0Factor = 3;
        t = 1.5 * t3 + t4 + t1 / 2.;
        hist.hT134LRLR->Fill(t);
      } else if ((type == "LRL" && theSegDir == L && (fabs(x1 - x3) < (2. * halfCell + delta))) ||
                 (type == "RLR" && theSegDir == R && (fabs(x1 - x3) < (2. * halfCell + delta)))) {
        t0Factor = 99;  // it's actually 1.5, but this value it's not used
        t = 3. / 4. * t3 + t4 / 2. + t1 / 4.;
        sigma = r78;
        hist.hT134LRLL->Fill(t);
      } else if ((type == "LLL" && theSegDir == L && x1 > x4 && (fabs(x1 - x3) < delta)) ||
                 (type == "RRR" && theSegDir == R && x1 < x4 && (fabs(x1 - x3) < delta))) {
        t0Factor = 0;
        t = 1.5 * t3 - t4 - t1 / 2.;
        hist.hT134LLLL->Fill(t);
      } else if ((type == "LLL" && theSegDir == R && (fabs(x1 - x3) < delta)) ||
                 (type == "RRR" && theSegDir == L && (fabs(x1 - x3) < delta))) {
        t0Factor = 0;
        t = -1.5 * t3 + t4 + t1 / 2.;
        hist.hT134LLLR->Fill(t);
      } else {
        t = -1;
        sigma = noR;
        hist.hT134Bad->Fill(t);
      }
      theTMaxes[cGroup] = new TMax(t, cGroup, type, sigma, t0Factor, hSubGroup);
      if (debug)
        cout << "tmax134 " << t << " " << t0Factor << " " << type << endl;
    }
    if ((layersIn == 9 || layersIn == 10) && (fabs(x2 - x4) < delta)) {
      cGroup = c234;
      type.clear();
      ((type += theSegType[1]) += theSegType[2]) += theSegType[3];
      sigma = r32;
      if ((type == "LRL") || (type == "RLR")) {
        t0Factor = 2;
        t = (t2 + t4) / 2. + t3;
        hist.hT234LRL->Fill(t);
      } else if ((type == "LRR" && theSegDir == R) || (type == "RLL" && theSegDir == L)) {
        t0Factor = 1;
        t = (t2 - t4) / 2. + t3;
        hist.hT234LRR->Fill(t);
      } else if ((type == "LLR" && theSegDir == R) || (type == "RRL" && theSegDir == L)) {
        t0Factor = 1;
        t = (t4 - t2) / 2. + t3;
        hist.hT234LLR->Fill(t);
      } else {
        t = -1;
        sigma = noR;
        hist.hT234Bad->Fill(t);
      }
      theTMaxes[cGroup] = new TMax(t, cGroup, type, sigma, t0Factor, hSubGroup);
      if (debug)
        cout << "tmax234 " << t << " " << type << endl;
    }
  }
}
 
vector<const DTTMax::TMax*> DTTMax::getTMax(const DTWireId& idWire) {
  vector<const TMax*> v;
  if (idWire.layer() == 1) {
    v.push_back(getTMax(c123));  //FIXME: needs pointer
    v.push_back(getTMax(c124));
    v.push_back(getTMax(c134));
  } else if (idWire.layer() == 2) {
    v.push_back(getTMax(c123));
    v.push_back(getTMax(c124));
    v.push_back(getTMax(c234));
  } else if (idWire.layer() == 3) {
    v.push_back(getTMax(c123));
    v.push_back(getTMax(c134));
    v.push_back(getTMax(c234));
  } else {
    v.push_back(getTMax(c124));
    v.push_back(getTMax(c134));
    v.push_back(getTMax(c234));
  }
  return v;
}
 
vector<const DTTMax::TMax*> DTTMax::getTMax(const DTSuperLayerId& isl) {
  vector<const TMax*> v;
  // add TMax* to the vector only if it really exists
  if (getTMax(c123))
    v.push_back(getTMax(c123));
  if (getTMax(c124))
    v.push_back(getTMax(c124));
  if (getTMax(c134))
    v.push_back(getTMax(c134));
  if (getTMax(c234))
    v.push_back(getTMax(c234));
  return v;
}
 
const DTTMax::TMax* DTTMax::getTMax(TMaxCells cCase) { return theTMaxes[cCase]; }
 
/* Destructor */
DTTMax::~DTTMax() {
  for (vector<InfoLayer*>::const_iterator ilay = theInfoLayers.begin(); ilay != theInfoLayers.end(); ++ilay) {
    delete (*ilay);
  }
 
  for (vector<TMax*>::const_iterator iTmax = theTMaxes.begin(); iTmax != theTMaxes.end(); ++iTmax) {
    delete (*iTmax);
  }
}