DDEcalEndcapTrap.cc

Go to the documentation of this file.

#include "Geometry/EcalCommonData/interface/DDEcalEndcapTrap.h"
#include "CLHEP/Units/GlobalPhysicalConstants.h"
#include "CLHEP/Units/GlobalSystemOfUnits.h"
#include "CLHEP/Geometry/Point3D.h"
#include "CLHEP/Geometry/Plane3D.h"
#include "CLHEP/Geometry/Vector3D.h"
#include "CLHEP/Geometry/Transform3D.h"
#include "CLHEP/Vector/EulerAngles.h"
 
//#define EDM_ML_DEBUG
 
// Implementation of DDEcalEndcapTrap class
 
DDEcalEndcapTrap::DDEcalEndcapTrap(const int hand, const double front, const double rear, const double length) {
  //
  //  Initialise corners of supercrystal.
 
  // Start out with bottom surface on (x,z) plane, front face in (x,y) plane.
 
  double xsign;
 
  if (hand == 2) {
    xsign = -1.;
  } else {
    xsign = 1.;
  }
 
  m_hand = hand;
  m_front = front;
  m_rear = rear;
  m_length = length;
 
  int icorner;
  icorner = 1;
  m_corners[3 * icorner - 3] = xsign * front;
  m_corners[3 * icorner - 2] = front;
  m_corners[3 * icorner - 1] = 0.;
  icorner = 2;
  m_corners[3 * icorner - 3] = xsign * front;
  m_corners[3 * icorner - 2] = 0.;
  m_corners[3 * icorner - 1] = 0.;
  icorner = 3;
  m_corners[3 * icorner - 3] = 0.;
  m_corners[3 * icorner - 2] = 0.;
  m_corners[3 * icorner - 1] = 0.;
  icorner = 4;
  m_corners[3 * icorner - 3] = 0.;
  m_corners[3 * icorner - 2] = front;
  m_corners[3 * icorner - 1] = 0.;
 
  icorner = 5;
  m_corners[3 * icorner - 3] = xsign * rear;
  m_corners[3 * icorner - 2] = rear;
  m_corners[3 * icorner - 1] = length;
  icorner = 6;
  m_corners[3 * icorner - 3] = xsign * rear;
  m_corners[3 * icorner - 2] = 0.;
  m_corners[3 * icorner - 1] = length;
  icorner = 7;
  m_corners[3 * icorner - 3] = 0.;
  m_corners[3 * icorner - 2] = 0.;
  m_corners[3 * icorner - 1] = length;
  icorner = 8;
  m_corners[3 * icorner - 3] = 0.;
  m_corners[3 * icorner - 2] = rear;
  m_corners[3 * icorner - 1] = length;
 
  calculateCentres();
 
  // Move centre of SC to (0,0,0)
 
  translate();
 
  // Rotate into standard position (face centres on z axis)
 
  //  this->rotate();
 
  calculateCentres();
}
 
//void DDEcalEndcapTrap::rotate() {
//  //
//  //  Rotate supercrystal to standard position
//  //
//  std::cout << "DDEcalEndcapTrap::rotate() - not yet implemented" << std::endl;
//}
 
void DDEcalEndcapTrap::rotate(const DDTranslation& frontCentre, const DDTranslation& rearCentre) {
  //
  //  Rotate supercrystal to bring front and rear face centres to specified points
  //
  edm::LogVerbatim("EcalGeom") << "DDEcalEndcapTrap::rotate(DDTranslation,DDTranslation) - not yet implemented";
}
 
void DDEcalEndcapTrap::rotate(const DDRotationMatrix& rot) {
  //
  //  Rotate supercrystal by specified rotation about (0,0,0)
  //
 
  int icorner;
  DDTranslation cc;
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("EcalGeom") << "DDEcalEndcapTrap::rotate - rotation " << rot;
#endif
  for (icorner = 1; icorner <= 8; icorner++) {
    cc = cornerPos(icorner);
#ifdef EDM_ML_DEBUG
    edm::LogVerbatim("EcalGeom") << "   Corner (orig) " << icorner << cc;
#endif
    cc = rot * cc;
#ifdef EDM_ML_DEBUG
    edm::LogVerbatim("EcalGeom") << "   Corner (rot)  " << icorner << cc;
#endif
    cornerPos(icorner, cc);
  }
  m_rotation = rot * m_rotation;
  calculateCentres();
}
 
void DDEcalEndcapTrap::translate() {
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("EcalGeom") << "DDEcalEndcapTrap::translate() not yet implemented";
#endif
  translate(-1. * centrePos());
}
 
void DDEcalEndcapTrap::translate(const DDTranslation& trans) {
  //
  //  Translate supercrystal by specified amount
  //
 
  DDTranslation tcorner;
  for (int icorner = 1; icorner <= 8; icorner++) {
    tcorner = cornerPos(icorner) + trans;
    cornerPos(icorner, tcorner);
  }
  calculateCentres();
  m_translation = trans + m_translation;
}
 
void DDEcalEndcapTrap::moveto(const DDTranslation& frontCentre, const DDTranslation& rearCentre) {
  //
  //  Rotate (about X then about Y) and translate supercrystal to bring axis joining front and rear face centres parallel to line connecting specified points
  //
 
  //  Get azimuthal and polar angles of current axis and target axis
  double currentTheta = elevationAngle();
  double currentPhi = polarAngle();
  double targetTheta = elevationAngle(frontCentre - rearCentre);
  double targetPhi = polarAngle(frontCentre - rearCentre);
 
  //  Rotate to correct angle (X then Y)
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("EcalGeom") << "moveto: frontCentre " << frontCentre << std::endl
                               << "moveto: rearCentre  " << rearCentre << std::endl
                               << "moveto: X rotation: " << targetTheta << " " << currentTheta << " "
                               << targetTheta - currentTheta << std::endl
                               << "moveto: Y rotation: " << targetPhi << " " << currentPhi << " "
                               << " " << targetPhi - currentPhi;
#endif
  rotateX(targetTheta - currentTheta);
  rotateY(targetPhi - currentPhi);
 
  //  Translate SC to final position
  DDTranslation targetCentre = 0.5 * (frontCentre + rearCentre);
#ifdef EDM_ML_DEBUG
  edm::LogVerbatim("EcalGeom") << "moveto: translation " << targetCentre - centrePos();
#endif
  translate(targetCentre - centrePos());
}
 
void DDEcalEndcapTrap::rotateX(const double angle) {
  //
  //  Rotate SC through given angle about X axis
  //
 
  const CLHEP::HepRotation tmp(CLHEP::Hep3Vector(1., 0., 0.), angle);
 
  rotate(DDRotationMatrix(tmp.xx(), tmp.xy(), tmp.xz(), tmp.yx(), tmp.yy(), tmp.yz(), tmp.zx(), tmp.zy(), tmp.zz()));
}
 
void DDEcalEndcapTrap::rotateY(const double angle) {
  //
  //  Rotate SC through given angle about Y axis
  //
  const CLHEP::HepRotation tmp(CLHEP::Hep3Vector(0., 1., 0.), angle);
 
  rotate(DDRotationMatrix(tmp.xx(), tmp.xy(), tmp.xz(), tmp.yx(), tmp.yy(), tmp.yz(), tmp.zx(), tmp.zy(), tmp.zz()));
}
 
void DDEcalEndcapTrap::calculateCentres() {
  //
  //  Calculate crystal centre and front & rear face centres
  //
 
  int ixyz, icorner;
 
  for (ixyz = 0; ixyz < 3; ixyz++) {
    m_centre[ixyz] = 0;
    m_fcentre[ixyz] = 0;
    m_rcentre[ixyz] = 0;
  }
 
  for (icorner = 1; icorner <= 4; icorner++) {
    for (ixyz = 0; ixyz < 3; ixyz++) {
      m_centre[ixyz] = m_centre[ixyz] + 0.125 * m_corners[3 * icorner - 3 + ixyz];
      m_fcentre[ixyz] = m_fcentre[ixyz] + 0.25 * m_corners[3 * icorner - 3 + ixyz];
    }
  }
  for (icorner = 5; icorner <= 8; icorner++) {
    for (ixyz = 0; ixyz < 3; ixyz++) {
      m_centre[ixyz] = m_centre[ixyz] + 0.125 * m_corners[3 * icorner - 3 + ixyz];
      m_rcentre[ixyz] = m_rcentre[ixyz] + 0.25 * m_corners[3 * icorner - 3 + ixyz];
    }
  }
}
 
DDTranslation DDEcalEndcapTrap::cornerPos(const int icorner) {
  //
  //  Return specified corner as a DDTranslation
  //
  return DDTranslation(m_corners[3 * icorner - 3], m_corners[3 * icorner - 2], m_corners[3 * icorner - 1]);
}
 
void DDEcalEndcapTrap::cornerPos(const int icorner, const DDTranslation& cornerxyz) {
  //
  //  Save position of specified corner.
  //
  for (int ixyz = 0; ixyz < 3; ixyz++) {
    m_corners[3 * icorner - 3 + ixyz] = (0 == ixyz ? cornerxyz.x() : (1 == ixyz ? cornerxyz.y() : cornerxyz.z()));
    ;
  }
}
 
DDTranslation DDEcalEndcapTrap::centrePos() {
  //
  //  Return SC centre as a DDTranslation
  //
  return DDTranslation(m_centre[0], m_centre[1], m_centre[2]);
}
 
DDTranslation DDEcalEndcapTrap::fcentrePos() {
  //
  //  Return SC front face centre as a DDTranslation
  //
  return DDTranslation(m_fcentre[0], m_fcentre[1], m_fcentre[2]);
}
 
DDTranslation DDEcalEndcapTrap::rcentrePos() {
  //
  //  Return SC rear face centre as a DDTranslation
  //
  return DDTranslation(m_rcentre[0], m_rcentre[1], m_rcentre[2]);
}
 
double DDEcalEndcapTrap::elevationAngle(const DDTranslation& trans) {
  //
  //  Return elevation angle (out of x-z plane) of a given translation (seen as a vector from the origin).
  //
  double sintheta = trans.y() / trans.r();
  return asin(sintheta);
}
 
double DDEcalEndcapTrap::elevationAngle() {
  //
  //  Return elevation angle (out of x-z plane) of SC in current position.
  //
  DDTranslation current = fcentrePos() - rcentrePos();
  return elevationAngle(current);
}
 
double DDEcalEndcapTrap::polarAngle(const DDTranslation& trans) {
  //
  //  Return polar angle (from x to z) of a given translation (seen as a vector from the origin).
  //
  double tanphi = trans.x() / trans.z();
  return atan(tanphi);
}
 
double DDEcalEndcapTrap::polarAngle() {
  //
  //  Return elevation angle (out of x-z plane) of SC in current position.
  //
  DDTranslation current = fcentrePos() - rcentrePos();
  return polarAngle(current);
}
 
void DDEcalEndcapTrap::print() {
  //
  //  Print SC coordinates for debugging
  //
  edm::LogVerbatim("EcalGeom") << "Endcap supercrystal";
  for (int ic = 1; ic <= 8; ic++) {
    DDTranslation cc = cornerPos(ic);
    edm::LogVerbatim("EcalGeom") << "Corner " << ic << " " << cc;
  }
  edm::LogVerbatim("EcalGeom") << "    Centre " << centrePos() << std::endl
                               << "   fCentre " << fcentrePos() << std::endl
                               << "   rCentre " << rcentrePos();
}