L1GctPrintLuts.cc

Go to the documentation of this file.

#include "L1Trigger/GlobalCaloTrigger/plugins/L1GctPrintLuts.h"
 
#include "FWCore/PluginManager/interface/ModuleDef.h"
#include "FWCore/Framework/interface/MakerMacros.h"
#include "FWCore/Framework/interface/ESHandle.h"
 
#include "FWCore/MessageLogger/interface/MessageLogger.h"
 
// GCT include files
#include "L1Trigger/GlobalCaloTrigger/interface/L1GctJetEtCalibrationLut.h"
#include "L1Trigger/GlobalCaloTrigger/interface/L1GctWheelJetFpga.h"
#include "L1Trigger/GlobalCaloTrigger/interface/L1GctGlobalEnergyAlgos.h"
#include "L1Trigger/GlobalCaloTrigger/interface/L1GctGlobalHfSumAlgos.h"
#include "L1Trigger/GlobalCaloTrigger/interface/L1GctHfBitCountsLut.h"
#include "L1Trigger/GlobalCaloTrigger/interface/L1GctHtMissLut.h"
#include "L1Trigger/GlobalCaloTrigger/interface/L1GctHfEtSumsLut.h"
#include "L1Trigger/GlobalCaloTrigger/interface/L1GlobalCaloTrigger.h"
 
#include <iostream>
#include <fstream>
#include <sys/stat.h>
 
L1GctPrintLuts::L1GctPrintLuts(const edm::ParameterSet& iConfig)
    : m_jetRanksOutFileName(iConfig.getUntrackedParameter<std::string>("jetRanksFilename", "gctJetRanksContents.txt")),
      m_hfSumLutOutFileName(iConfig.getUntrackedParameter<std::string>("hfSumLutFilename", "gctHfSumLutContents.txt")),
      m_htMissLutOutFileName(
          iConfig.getUntrackedParameter<std::string>("htMissLutFilename", "gctHtMissLutContents.txt")),
      m_gct(new L1GlobalCaloTrigger(L1GctJetLeafCard::hardwareJetFinder)),
      m_jetEtCalibLuts() {
  // Fill the jetEtCalibLuts vector
  lutPtr nextLut(new L1GctJetEtCalibrationLut());
 
  for (unsigned ieta = 0; ieta < L1GctJetFinderBase::COL_OFFSET; ieta++) {
    nextLut->setEtaBin(ieta);
    m_jetEtCalibLuts.push_back(nextLut);
    nextLut.reset(new L1GctJetEtCalibrationLut());
  }
  m_jfParsToken = esConsumes<L1GctJetFinderParams, L1GctJetFinderParamsRcd>();
  m_etScaleToken = esConsumes<L1CaloEtScale, L1JetEtScaleRcd>();
  m_htMissScaleToken = esConsumes<L1CaloEtScale, L1HtMissScaleRcd>();
  m_hfRingEtScaleToken = esConsumes<L1CaloEtScale, L1HfRingEtScaleRcd>();
}
 
L1GctPrintLuts::~L1GctPrintLuts() {
  // do anything here that needs to be done at desctruction time
  // (e.g. close files, deallocate resources etc.)
}
 
//
// member functions
//
 
// ------------ method called to for each event  ------------
void L1GctPrintLuts::analyze(const edm::Event& iEvent, const edm::EventSetup& iSetup) {
  // get config data from EventSetup
  // check this has been done successfully before proceeding
  if (configureGct(iSetup) == 0) {
    // Write to a new file
    struct stat buffer;
    if (!stat(m_jetRanksOutFileName.c_str(), &buffer)) {
      edm::LogWarning("LutFileExists") << "File " << m_jetRanksOutFileName
                                       << " already exists. It will not be overwritten." << std::endl;
    } else {
      std::ofstream file;
      file.open(m_jetRanksOutFileName.c_str());
 
      if (file.good()) {
        // Print the calibration lut contents
        file << " Gct lookup table printout \n"
             << "===========================\n\n"
             << "Jet Et Calibration lut contents\n"
             << std::endl;
        for (unsigned ieta = 0; ieta < m_jetEtCalibLuts.size(); ieta++) {
          file << *m_jetEtCalibLuts.at(ieta) << std::endl;
        }
      } else {
        edm::LogWarning("LutFileError") << "Error opening file " << m_jetRanksOutFileName
                                        << ". No lookup tables written." << std::endl;
      }
      file.close();
    }
 
    if (!stat(m_hfSumLutOutFileName.c_str(), &buffer)) {
      edm::LogWarning("LutFileExists") << "File " << m_hfSumLutOutFileName
                                       << " already exists. It will not be overwritten." << std::endl;
    } else {
      std::ofstream file;
      file.open(m_hfSumLutOutFileName.c_str());
 
      if (file.good()) {
        // Print the Hf luts
        file << "\n\n Hf ring jet bit count luts:" << std::endl;
        file << "\n Positive eta, ring1" << std::endl;
        file << *m_gct->getEnergyFinalStage()->getHfSumProcessor()->getBCLut(L1GctHfEtSumsLut::bitCountPosEtaRing1)
             << std::endl;
        file << "\n Positive eta, ring2" << std::endl;
        file << *m_gct->getEnergyFinalStage()->getHfSumProcessor()->getBCLut(L1GctHfEtSumsLut::bitCountPosEtaRing2)
             << std::endl;
        file << "\n Negative eta, ring1" << std::endl;
        file << *m_gct->getEnergyFinalStage()->getHfSumProcessor()->getBCLut(L1GctHfEtSumsLut::bitCountNegEtaRing1)
             << std::endl;
        file << "\n Negative eta, ring2" << std::endl;
        file << *m_gct->getEnergyFinalStage()->getHfSumProcessor()->getBCLut(L1GctHfEtSumsLut::bitCountNegEtaRing2)
             << std::endl;
        file << "\n\n Hf Et sum luts:" << std::endl;
        file << "\n Positive eta, ring1" << std::endl;
        file << *m_gct->getEnergyFinalStage()->getHfSumProcessor()->getESLut(L1GctHfEtSumsLut::etSumPosEtaRing1)
             << std::endl;
        file << "\n Positive eta, ring2" << std::endl;
        file << *m_gct->getEnergyFinalStage()->getHfSumProcessor()->getESLut(L1GctHfEtSumsLut::etSumPosEtaRing2)
             << std::endl;
        file << "\n Negative eta, ring1" << std::endl;
        file << *m_gct->getEnergyFinalStage()->getHfSumProcessor()->getESLut(L1GctHfEtSumsLut::etSumNegEtaRing1)
             << std::endl;
        file << "\n Negative eta, ring2" << std::endl;
        file << *m_gct->getEnergyFinalStage()->getHfSumProcessor()->getESLut(L1GctHfEtSumsLut::etSumNegEtaRing2)
             << std::endl;
      } else {
        edm::LogWarning("LutFileError") << "Error opening file " << m_hfSumLutOutFileName
                                        << ". No lookup tables written." << std::endl;
      }
      file.close();
    }
 
    if (!stat(m_htMissLutOutFileName.c_str(), &buffer)) {
      edm::LogWarning("LutFileExists") << "File " << m_htMissLutOutFileName
                                       << " already exists. It will not be overwritten." << std::endl;
    } else {
      std::ofstream file;
      file.open(m_htMissLutOutFileName.c_str());
 
      if (file.good()) {
        // Print the HtMiss luts
        file << "\n\n missing Ht lut:" << std::endl;
        file << *m_gct->getEnergyFinalStage()->getHtMissLut() << std::endl;
      } else {
        edm::LogWarning("LutFileError") << "Error opening file " << m_hfSumLutOutFileName
                                        << ". No lookup tables written." << std::endl;
      }
      file.close();
    }
  }
}
 
// ------------ method called once each job just before starting event loop  ------------
// This is where we work ...
void L1GctPrintLuts::beginJob() {}
 
// The configuration method for the Gct - copied from L1GctEmulator
int L1GctPrintLuts::configureGct(const edm::EventSetup& c) {
  int success = 0;
 
  if (success == 0) {
    // get data from EventSetup
    edm::ESHandle<L1GctJetFinderParams> jfPars = c.getHandle(m_jfParsToken);
    edm::ESHandle<L1CaloEtScale> hfRingEtScale = c.getHandle(m_hfRingEtScaleToken);
    edm::ESHandle<L1CaloEtScale> htMissScale = c.getHandle(m_htMissScaleToken);
    edm::ESHandle<L1CaloEtScale> etScale = c.getHandle(m_etScaleToken);
 
    if (jfPars.product() == nullptr) {
      success = -1;
      edm::LogWarning("L1GctConfigFailure")
          << "Failed to find a L1GctJetFinderParamsRcd:L1GctJetFinderParams in EventSetup!" << std::endl;
    }
 
    if (hfRingEtScale.product() == nullptr) {
      success = -1;
      edm::LogWarning("L1GctConfigFailure")
          << "Failed to find a L1HfRingEtScaleRcd:L1CaloEtScale in EventSetup!" << std::endl;
    }
 
    if (htMissScale.product() == nullptr) {
      success = -1;
      edm::LogWarning("L1GctConfigFailure")
          << "Failed to find a L1HtMissScaleRcd:L1CaloEtScale in EventSetup!" << std::endl;
    }
 
    //     if (chanMask.product() == 0) {
    //       success = -1;
    //       edm::LogWarning("L1GctConfigFailure")
    //  << "Failed to find a L1GctChannelMaskRcd:L1GctChannelMask in EventSetup!" << std::endl;
    //     }
 
    if (success == 0) {
      // tell the jet Et Luts about the scales
      for (unsigned ieta = 0; ieta < m_jetEtCalibLuts.size(); ieta++) {
        m_jetEtCalibLuts.at(ieta)->setFunction(jfPars.product());
        m_jetEtCalibLuts.at(ieta)->setOutputEtScale(etScale.product());
      }
 
      // pass all the setup info to the gct
      m_gct->setJetEtCalibrationLuts(m_jetEtCalibLuts);
      m_gct->setJetFinderParams(jfPars.product());
      m_gct->setHtMissScale(htMissScale.product());
      m_gct->setupHfSumLuts(hfRingEtScale.product());
      //      m_gct->setChannelMask(chanMask.product());
    }
  }
 
  if (success != 0) {
    edm::LogError("L1GctConfigError") << "Configuration failed - GCT emulator will not be run" << std::endl;
  }
  return success;
}
 
// ------------ method called once each job just after ending the event loop  ------------
void L1GctPrintLuts::endJob() {}
 
DEFINE_FWK_MODULE(L1GctPrintLuts);